Indian Institute Of Management Tender

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats

Providing and fixing of multicell polycarbonate panels of Danpal or equivalent make of minimum 12mm thick with min. 3 cells - 4 walls structure over MS supporting structures. Panel Width shall be 600mm to 900mm to ensure best performance for wind uplift. The panels shall be uniform in color with an integral microcell core having softlight finish to provide diffused light. In cross section, the core shall be constructed of microcells not exceeding 4mm x 4mm and shall be square/rectangular in appearance. Panels shall be coextruded with UV Protection layers with thickness and concentration to filter and block more than 99% of the UV rays (UVA and UVB) through a clear panel backed. The weight of the only panel shall not be less than 2580 gram per square meter. Panel shall have U value not more than 2.4 W/m2k. Panel and system should have impact and shock resistance for both Soft and Hard body impact certified and tested by an independent and qualified laboratory. The panels shall have cold bending radius of minimum 2.8 meter. Panel should achieve minimum sound absorption level 19 DB with third party Test certificate. Panel system shall have Vertical Standing Seam at both sides and snap-on connector to interlock the panels with a grip-lock 2 tooth locking mechanism to ensure maximum uplift capability, water tightness and air tightness. Panels shall be fixed on Purlins (paid separately) with special SS Expansion fastener and polycarbonate U/2 connectors.

Panel system shall be sealed with additional Tape / End caps / Aluminium F and/or U Profile (mill finish) at the ends. Panel should pass through Sandbag impact test ASTM E 695-03 after 25,000 hours of environmental exposure and Hailstone impact test ASTM E 822-81. The panel system shall pass water penetration test ASTM E -331. The panel to have classification under B S1 D0 for reaction to fire as per test standard EN 13501 – 1:2002 tested by an independent, recognized testing laboratory. The panels shall be warranted for minimum ten (10) years from OEM. All complete job of approved quality/ make/ specifications/ necessary fittings/ accessories like PC Connectors, Screws, End Caps, Expansion Fastener, UPD, tape etc. complete as per the actual requirement of site & direction of Engineer-in-Charge.

Hiring of JCB for levelling the ground.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing GI wire 4mm thick

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm

Fixing of available chain link fabric fencing already framed in builtup sections at Substation in IIM Indore. Rate analysis attached.