Higher Education Department Tender

Podium , PodiumDimension W-600mmX D-450mmX H-1250mm m 200mm wide Leg section made of extruded Aluminium section and Ms cold rolled close annealed covers for wire management. Top made up of 18mm the prelaminated partial board with teak wooden edge banded on edges. One edge protruded up, would be of teak wood to hold the paper/books. All metal section powder- coated with min. 45 micron DFT after anti corrosion surface treatment.

Staff Table , Foot Rest Maerial Mild Steel square section of size 25x25 mm and wall thickness minimun 1.6 mm handles Material Corrosion Resistance Metal Thickness of PVC tape on edges of Table Banded with the help of hot melt glue (mm) 1.55 Storage Unit and Drawer Units Material 0.6 mm M S sheet Shoes Material PVC Conformity to India Standard IS 8126 Storage Both Side Total Number of Storage Units four Strorage Cup Board/Locker type Storage Units one Type of storage units other designs Lock on all storage units Provided Loading capacity of table top in KG 200 KG Table Top Material and Thickness 18 mm thick prelaminated particle board Padestal mild steel square section of outside side minimun 25 mm and wall thickness minumun 1.2 mm Table Top Length 1500mm Table Top width 900mm Table Height 760 mm Widht of Storage Unit+/-5mm 355mm Depth of Storage Unit+/-10mm 550 mm Overall Height of Storage Units +/-10mm 430 mm Height of smallest Storage Compartment/Drawer+/-3mm 150mm Height of medium size storage Compartment/Drawer+/-3mm Sme As Smallest Height of Largest Storage Compartment/Drawer+/-5mm Same as MEDIUM Width of Locker/Cupboard type Storage unit 350mm Depth of Locker/Cupboard type Storage unit 600 mm Height of Locker/ Cupboard type Storage unit 430mm

Staff Chair , Chair type Non-Revolving and Non- Tilting chair with Armrest Chair frame type Cantilever Armrest type Continuous armrest Armrest front side Flat Seat/Backrest type Padded with PU Foam Seat Fitted Over flat size in depth wish of the frame on both sides with minimun 3 screws Backrest fitted by round head screws 3 Nos. (Minimum) on each side frame Material Configuration One piece Frame material Stainless steel 202 Grade The shape of tubular section of frame round section size of frame 25mm frame section wall thickness 1.8mm the armrest material injection moulded PP Armrest material thickness 15mm seat material Moulded Plywood Seat padded Yes Seat Material thickeness 40mm Density of polyurethane foam used in seat 45 Seat upholstered with Fabric GSM of Seat cover 220 GSM Polyurethane foam thickness 50mm colour of seat cover Black Backrest material Single piece of cold reduced carbon steel sheet confmg. to grade CR0 of IS 513 part 1 (With latest amendment) Backrest material thickness 25mm Density of Polyurethane foam used in Backrest 45 Backrest upholstered with Fabric GSM of Backrest cover 220 GSM Polyurethane foam thickness 20mm Colour of Backrest cover Black