GAIL India Limited Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
GAIL India Limited - GAIL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date16 Oct 2024
Closing Date11 Nov 2024
Tender AmountRefer Documents
Costs
EMD
₹ 2,04,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_GAIL_211546_1Tender No
GAIL/VH/C23199/NR/CIVIL/2024Tender Authority
GAIL India Limited ViewPurchaser Address
-Website
http://etenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earthwork in excavation
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means for foundation, trenches including getting out and disposal of excavated earth outside GAIL premises as directed by Engineer-in charge for all kinds of soil/Ordinary rock /hard rock .
170
-
-
Providing and fixing soil, waste and vent pipes
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings(door or plain) viz elbolws, bends, tees, junctions, shoe bends, couplers, offsets, cowel etc. complete including jointing with solvent cement including excavation & backfilling, GI supports, cutting and making good wherever required. Nothing extra will be paid for supports.(Vertical Soil, waste, sewer line, balcony waste & rain water pipes) - 110 OD
100
-
-
Providing and fixing soil, waste and vent pipes
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings(door or plain) viz elbolws, bends, tees, junctions, shoe bends, couplers, offsets, cowel etc. complete including jointing with solvent cement including excavation & backfilling GI supports, cutting and making good wherever required. Nothing extra will be paid for supports.(Vertical Soil, waste, sewer line, balcony waste & rain water pipes) - 160 OD
100
-
-
Earthwork in backfilling
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering as per direction of Engineer-in-charge.
170
-
-
Dismantling of doors and windows
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking as per direction of EIC : Of area 3 sq. metres and below
10
-
-
Dismantling of doors and windows
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking as per direction of EIC : Of area beyond 3 sq. metres
10
-
-
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified/Matt floor tiles polished finish of size Size of Tile 1200 x 600 mm or as per discretion of EIC
480
-
-
Skirting
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
20
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
220
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
300
-
-
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/M2 (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro staticallypolyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece
140
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of wooden ply 12mm thick to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge including the cost of laminate 1mm thick on wooden ply 12mm thick
150
-
-
Providing and fixing Access Panel Trap Door in False Ceiling of sizes 2000 x 1500 or as specified (size may vary). The item shall consist of 50 x50 mm thick. seasoned merandi wood framework on periphery having rebate for fixing 19mm thick waterproof board shutters with wooden trims all around, fixed with brass piano hinges and allen key locking arrangement. The board shutter shall have 19mm x 12mm thick teak wood lipping. The seasoned merandi wood frame and inside of shutter shall be treated with fire retardant paint. The inner/outer surface of the shutters shall be finished with matching 1mm laminate/ paint (as per the instructions), all complete as per direction and instruction of the Engineer-in-charge, design / detail.
10
-
-
Providing and fixing factory made uPVC white/coloured fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. The item is inclusive of glass panes of minimum thickness 5mm and silicon sealant.
40
-
-
Providing & Fixing aluminum windows /door /partition /ventilator along with powder coated (50-60 Microns) in approved colour with extruded buildup standard, tabular & other sections of grade 63400WP confirming to IS code The windows/door/partition/ventilator could be fixed /Sliding/casement as per the architectural drawings & details. The aluminum section shall be smooth, rust free, straight and fabrication shall be done from factory with all joints mitered/crimped, outer frame, mullions and shutter frames jointed with heavy duty aluminum angles/cleats and SS Screws including providing masking tapes on the profiles for safety against external scratches at site (protection tape to be removed only at the time of handing over as per the instructions of Engineer-in-charge). The fastening will be done to the structure opening at anchorage locations in jambs & sills with rawl plug and screws or with expansion fasteners to provide a minimum anchorage of 50 to 80mm in the masonry. Appropriate profile of EPDM gaskets shall be inserted between aluminum frames/ beadings and glass both inside and outside to make the glazing tight. Glazing clips, EPDM Gaskets shall be used for sealing. The silicon sealant of approved make to be used wherever required for weather proofing. The windows/doors/partition shall have approved fittings like handles, two point locking system and friction stays/euro hinges as per design required. All the Aluminum works shall be as per the details of the Engineers with 8mm clear toughended glass. The frames, glass and the adjoining structures to be clean and tidy. All aluminum windows are to form a system. Make : Jindal, Hindalco, Agv Alfab
10
-
-
Providing & fixing Wood veneer wall panelling made out of suitable M.S Section/Saal wood frame including 12mm commercial ply duly finished with 4mm thick wood veneer on front & side of frame work. Each panel to be made as per design/detail finalized by EIC, such that a 3d effect is attained. Base of wall surface between each wooden panel to be duly finished with velvet touch (diamond glow) paint or equivalent of approved shade including pop punning of wall along with this work would need the design to be printed in 1:1 ratio & marked on the actual location with print & peel sheets to achive complete accuracy. The wood veneer to be finish with PU polish & necessary hardware as required, complete in all respect as per the satisfaction of the Engineer-in -charge.
20
-
-
Providing& fixing in position wall panelling at all heights of thickness 25 mm with Fiber Glass Acoustical Wall Panels of size 600X600 /600x1200 mm , resin bonded square edges. The panels should be manufactured from high density bio-soluble resin bonded glass wool absorber having density of 96 Kgs/m3 and wrapped on the front side with an acoustically transparent fabric having option of colours and fabric options like jute etc. as per approved by engineer-in-charge, plain tissue backer and fabric wrapped hardened edges. The panel should be fully recycled and fire retardant as per Class A. The installation comprises surface impalers having projecting elements called spikes shall be fixed on the plain surface at 1200 mm center to center horizontally and 600 mm center to center vertically or as per approved by engineer-in-charge, using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Wall Panels shall be pierced through the spikes of the impalers ensuring line & level of panel are maintained. The panels should be mounted on the impalers horizontally or vertically as per the approved design or as per the directions of the engineer-in-charge.
90
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners is included in this item only).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile
shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on
this account shall be made.
Frame size 65 x 125 mm
120
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium
carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity
index of 12 for 100 gms) and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws is included in this item only)
35 mm thick
60
-
-
Providing wood work in frames of doors, windows, clerestory windows, partition, cupboard and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener etc is included in this item only).
Second class teak wood
0.1
-
-
Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
1.0 mm thick
Shade to be finalized by EIC
11
-
-
Providing and fixing 12 mm thick Marine 710 ply for doors, windows, clerestory windows, partitions, wardrobe and cup-boards including hinges, screws, handle and all necessary fittings if or so required
Marine plywood conforming to IS: 710
10
-
-
Providing and fixing in position Kitchen Cabinet Below Counter upto 600mm deep, made out of 18mm thick
waterproof (termite resistant) board/ply Marine 710, duly finished with 1 mm laminate on both sides of the shutters and all internal surfaces finished with flat paint as/approved. Front of shutters to be finished with 1mm.thick laminate.
Anti-termite oil to be put on the raw surface before applying/ finishing /installing with laminate/installing.
Complete including SS basket 304 grade as per drawing/detail, drawers, necessary s.s.hardware, door handle, hinges, adhesive, channels etc, complete in all respect.
10
-
-
Providing and fixing in position Storage of any height, 18mm thick. commercial board/ply duly laminated (1mm
premium category) on all external surfaces, rear of the shutter. Front shutter made out of 18mm thick
commercial board. All other surfaces incl. shelves, drawers etc to be finished with 1mm thick laminate
as/approved. Rear to be made of 8 mm thick commercial ply. All outer exposed area shall be finished with
approved 1mm thick premium laminate/matching paint finish. Anti termite oil to be put on the raw surface
before applying/ finishing with laminate. All complete including making set (s) for mock-up sample for
approval, modifying, etc including necessary hardware such as heavy duty s.s.hinges/piano hinge, locks,
magnetic catchers etc.
10
-
-
Providing and fixing in position of following size STORAGE CABINET unit made out of 18 mm thick termite-resitant, waterproof commercial board/ply for bottom, shelf/ partition, sides, drawer units, shelves etc. Frontshutter made out of 18mm thick commercial board, all outer exposed area shall be finished with approved 1mm laminate and inside areas shall be finshed with 1mm thick laminate as/approved. Each wardrobe to have one lockable drawer. The wardrobe have 50mm x 50mm legs should be made of sesoned hardwood. Anti termite oil to be put on the raw surface before applying/ finishing with laminate. Price to including necessary hardware such as knobs, handles, magnet catchers, hinges, hanging rod oval shaped of stainless steel. All exposed edges finished with teak wood lipping duly finished with matching colour as directed. Complete in all respect including grove, getting it approved, constructing set (s) for mock-up sample for approval, modifying, etc.
6
-
-
Providing and fixing SS grade 304 floor door stopper, ISI marked, transparent or dyed to required colour and shade, with necessary screws etc. complete.
Twin rubber stopper
12
-
-
Cylindrical Door Lock
Providing, Supplying & fixing of cylindrical door lock (decorative powder coated/plain) of required shape and size.
10
-
-
Providing and fixing SS grade 304 universal hydraulic door closer (door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
20
-
-
Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.
125x70x4 mm (ordinary type)
70
-
-
Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.
75x65x4 mm (ordinary type)
70
-
-
Providing & fixing of Blackout Roller Blinds fabric made up of 100% Polyester with Acrylic coated of 0.32mm(PVC free) of thickness 0.50mm ±5% and weighing 270-295gsm. The control clutch drive unit engineered heavy duty chain drive pulley operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 37mm into roller tube. It is self-lubricating Exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be positioned at Right hand or Left hand side of the shade. Clutch gear ration 1.75:1 for reduced operating force on larger blinds. Tube bearing plug idler Exclusive self-lubricating spring loaded plastic bearing end plug with positive locking wheel allows for adjustment and provides for a secure installation and removal of shade. Tube bearing plug contain minimum 6 ribs and inserted a minimum of 37mm into roller tube. Mounting hardware brackets universal brackets including end plug bracket with lock down retainer device. Brackets finish of powder coated metal installation brackets made of stamped and hardened steel with 46mm projection for wall, ceiling and side fitting with screws and end cap covers. Roller tube circular-shaped aluminium tube extruded from alloy 6060 and temper T66 – EN755 of 37mm inside diaM and outside diaM 40.2mm extruded tube to have a 1.6mm wall thickness with standard anodized natural finish. Heavily reinforced with minimum six internal ribs providing additional tensile strength and allows for secure placements of clutch and end plug. Bottom rail flat-shaped extruded aluminium from alloy 6060 and temper T66 – EN755 of dimension 13mm * 30mm and wall thickness of 1.5mm and weight of 390g/m. Rail standard finish of powder coat white color and provided cover. Ball chain shall be 2mm diaM cord with 4.5mm diaM acetal balls molded coaxially to it on 11.8mm pitch to foM an endless ball chain. It is used for raising or lowering action of the shades. Plastic parts all plastic components are UV-stable compounds available white colour.
60
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work 1:1.5:3 (1 cement : 1.5 coarse sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
50
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
20
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete
6000
-
-
Centering and shuttering including strutting, propping etc. and removal of formwork for foundations, footings, bases of columns, beams etc. as per direction of Engineer-in-charge.
180
-
-
Wooden Partition Work-Providing and fixing in position the partition consisting of frame work for movable structure folding partition like aluminium track L, T or shape corner, trolley, top seal, frame seal, bottom seal, explosive polt, pulley, crank handle securly fixed to wall along with rail/track on ceiling and floor complete
in all respect and both face finish to be made of 12mm thick MARINE 710 Ply with laminate. (Laminate to be finalized by EIC)
60
-
-
P/F mirror 5mm thick mounted on 12mm marine ply fixed on studs in toilets. The edges of the mirror shall
be chamfered and polished to achieve a neat look.the provision shall be made of providing the lighting from the
back
4
-
-
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
With cement mortar 1:4 (1 cement : 4 fine sand)
20
-
-
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
410
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
410
-
-
Providing and applying plaster of paris putty of 6mm-8 mm thickness over plastered surface to prepare the
surface even and smooth complete.
290
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
640
-
-
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
Two or more coats
300
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
340
-
-
Aluminium framework Fixed
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
For fixed portion, Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
160
-
-
Aluminium framework for door
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required Anodised aluminium (anodised transparent
or dyed to required shade according to IS: 1868, Minimum anodic coating of grade
AC 15
10
-
-
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand)
30
-
-
12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)
150
-
-
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)
120
-
-
Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.
2
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : Stone slab 25 mm thick
10
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone slab of all area, colour black, Cherry/Ruby red for platforms, counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) as required, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
20
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete
4
-
-
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required including waste pipe, coupling etc. Kitchen sink with drain board-510x1040 mm bowl depth 250 mm
2
-
-
Corian top:- Providing & fixing cladding with 'Corian' finish using Acrylic solid surface of 6 mm thickness on top of tables, facia storage units, columns etc etc. where directed. The rate to include all materials, labour, transportation, wastages etc. complete
30
-
-
Providing and fixing white vitreous china extended wall mounted water closet of size 545 x 350 x 360 mm
of approved shape including providing and fixing of metropole flush valve dual flow 32mm size (concealed
body) with exposed shut off provision & round flange (3.0/6.0 lts. per flushing),including sheet cover , and
cistern fittings, nut bolt gasket,chair etc complete.
9
-
-
Providing and fixing Health Faucet ABS body with 1 meter SS braided connection pipe.
9
-
-
Providing and fixing white vitreous china sensor operated urinal of approx. size 320 x 335 x 620 mm mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
10
-
-
Providing and fixing white vitreous china Oval shaped wash basin for top/under counter mounting with 15 mm
C.P. brass single hole basin mixer of approved quality and make, including painting of fittings and brackets,
cutting and making good the walls whereever required.
8
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length , 15 mm nominal bore
8
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
8
-
-
Providing and fixing toilet paper holder as per the direction of Engineer-in-charge.
9
-
-
Providing & fixing Nickel Chromium Plated liquid soap container/dispenser with metallic bottle of 51 mm dia & 122 mm height (Total height 162mm) of approved brand & make 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, complete as per direction of Engineer in Charge.
8
-
-
Providing and fixing C.P. Angle cock for basin mixer and geyser points of approved quality conforming to
IS:8931 15mm nominal bore
8
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and
weighing not less than 690 gms.
Bib cock long body
1
-
-
Providing & fixing CP waste coupling 32mm full / half thread including removal of old/ damaged one, as directed by EIC including PTMT Waste Coupling for wash basin and sink, of approved quality and colour Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms
18
-
-
Providing & fixing CP pillar cock long neck/tall with aerator for wash basin including removal of old/ damaged one, as directed by EIC. 15 mm nominal bore
8
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed/Exposed work, including cutting chases and making good the walls etc
20 mm nominal dia Pipes
20
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge
Concealed/Exposed work, including cutting chases and making good the walls etc
25 mm nominal dia Pipes
20
-
-
Providing and fixing uPVC SWR P Trap with minimum 50mm water seal conforming to IS 13592
110 mm inlet & 110 mm outlet
2
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with PVC/C.I. grating brick masonry chamber with water tight PVC/C.I. cover with frame of 300 x300 mm size (inside) 100x100 mm size With common burnt clay F.P.S. (non modular) nbricks of class designation 7.5
6
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
2000
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
4
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 25 mm nominal bore
2
-
-
Providing and fixing of approved 6mm thk Lacquered Glass over 6mm thk Marine 710 Ply Board backing .Glass to be fixed on 6mm thk Marine 710 Ply Board backing using 3M double sided tape / Adhesives , including all necessary hardware required for it etc., complete as per the detail drawing
66
-
-
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying
a priming coat of approved steel primer with synthetic enamel paint using structural steel etc. as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1000
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
40
-
-
Providing and Fixing SoundScapes - Acoustical clouds which are 30 mm thick, flat glass fiber panels with Humidity Resistance RH 90% & Recycled Content of minimum 30%, come in various shape options like Square / Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) and in standard Traffic White color with LR 90% or in the color specified by Engineer in charge (Ivory / Pale Green / Pastel Blue / Traffic Grey / Pale Brown). or in the color specified Engineer in charge . The size and sound absorption details are as :2.12 metric sabin.Shape- Circle ,Nominal Size- circular- of different diameters as below. The back of each panel to have embedded square frame bracket system of 610x610mm in which provisions are already made for integration of installation system for suspension of individual or grouped panels.The panels to be suspended individually using the SoundScapes Deck hanging kit. Each kit to consist of gripper structure anchors with an outer diameter of 16mm and height 23mm, aircraft cables of 1.5mm dia 2.44 LM in length and bottom end cable adjusters of 8.9mm outer diameter. Each panel to be suspended using the aircraft cables which are suspended from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster which are screwed in the 4 corners of the frame bracket system.The height & level of the panels can be adjusted using the bottom end cable adjusters. Make : HunterDouglas, Amstrong, Credance. 1200 MM Dia.
12
-
-
Providing and Fixing SoundScapes - Acoustical clouds which are 30 mm thick, flat glass fiber panels with Humidity Resistance RH 90% & Recycled Content of minimum 30%, come in various shape options like Square / Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) and in standard Traffic White color with LR 90% or in the color specified by Engineer in charge (Ivory / Pale Green / Pastel Blue / Traffic Grey / Pale Brown). or in the color specified by Engineer in charge . The size and sound absorption details are as :2.12 metric sabin.Shape- Circle ,Nominal Size- circular- of different diameters as below. The back of each panel to have embedded square frame bracket system of 610x610mm in which provisions are already made for integration of installation system for suspension of individual or grouped panels.The panels to be suspended individually using the SoundScapes Deck hanging kit. Each kit to consist of gripper structure anchors with an outer diameter of 16mm and height 23mm, aircraft cables of 1.5mm dia 2.44 LM in length and bottom end cable adjusters of 8.9mm outer diameter. Each panel to be suspended using the aircraft cables which are suspended from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster which are screwed in the 4 corners of the frame bracket system.The height & level of the panels can be adjusted using the bottom end cable adjusters. Make : HunterDouglas, Amstrong, Credance. 900 MM Dia
12
-
-
Axial Air High-Speed Plastic Exhaust/Ventilation Fan (150 mm/6 Inches, White)
Make-Crompton
Style-Axialair
Product Dimensions-30.8D x 30.5W x 25H Centimeters
Controller-Button Control
6
-
-
Providing, supplying and installation of commercial kitchen chimney consisting of oil collector in such a way so that oil drains from filters into a drip tray can be removed & cleaned. The motor should be minimum of 230W and suction airflow to be minimum 1200 m3/hour which allows clean environment in kitchen by throwing grime and smoke. The chimney must consist of 2 environment friendly LED lights to brigten up the cooking area and should have touch control with motion sensor. The oil collector tray and baffle filter to be made up of stainless steel material for longer durability. The item includes all necessary fittings including PVC flexible, pipe, duct, cable, hood, outer cowl steel cover etc. No extra payment shall be paid in this regard.
1
-
-
Providing and applying approved plaster of paris (super fine quality) punning with minimum thickness of 6mm & making decorative plaster of paris (approved super fine quality) cornice upto 100x100mm (cast in situ), moulding in the required profile and and finish the surface smooth in line and level including hacking, filling materials, scrapping & sand papering, preparation of base, curing, scaffolding etc.; all complete as per detailed drawings, specifications & upto the entire satisfaction of the Engineer-in-charge
50
-
-
DIGITAL 2D/3D WALL PAPER : Providing & fixing 2d/3d digital printing printing on approved
paper/canvas/fabric media as per suggested graphic work on suggested surface .Contractor shall provide ngraphic work detail & 5 M2m sample for approval the work shall be done inclusive of all rate with accesesories,tool tackel at all height compelte
10
-
-
Providing and fixing 16 mm thick beveled tegular Mineral fibre false ceiling tile (NRC 0.55 to 0.6) false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main #T#. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. Make: Armstrong, credence, dexune
54
-
-
Anodised Aluminium sliding door bolt 300x16 mm
5
-
-
Oxidised mild steel sliding door bolt 300x16 mm
5
-
-
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and
stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls
wherever required.
Kitchen sink with drain board-510x1040 mm bowl depth 250 mm
1
-
-
Dismantling of flushing cistern, WC, Wash basin, CI pipe incluidng concealed, PVC pipe, pillar cock, bib cock, angle valve and all other fittings to make area good for new work including stacking of useful materials and handing over to concerned person for both male and femal toilet block
1
-
-
Providing and fixing PTMT grating of approved quality and colour-Rectangular type with openable circular lid
150 mm nominal size square 100 mm diameter of the inner hinged round grating
15
-
-
S/F making art working hand painting work/ graphic film pasting/ vinyl film pasting/fabric printing and pasting on inside surface of dome like structures. The surface shall be prepared as per the requirement of application and as per the requirement of the applicator to render it fully smooth. all provisions whatsoever shall be made and deemed to be inclusive of the rate quoted by the bidder. this is a specialised item and bidder must quote it according to the market rates available and details thereof. the details shall be submitted for approval of the EIC before execution. all scaffolding works as per site including at all heights shall be deemed to be included in the quoted rate.
5
-
-
Making connection of drain or sewer line with existing manhole including breaking into and making good the
walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with
a floating coat of neat cement and making necessary channels for the drain etc. complete
3
-
-
Brick work with common burnt clay modular bricks of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand)
1
-
-
Providing and fixing teak wood bidding of size 12*12 mm
10
-
-
HVAC SYSTEM
-
-
-
SITC of VRV/VRF Heating & Cooling Units complete with DC scroll/Twin Compressor/ digital vapour injection scroll compressor with Fully 100% Inverter, air cooled condenser with low noise fan having DC fan motor, Centralized controller & Interconnected control and refrigerant piping housed in compact housing duly powder coated of following capacities with Pre Charged Referigerant (R-410A). The function of sequencing and operation of equal fan run hour basis would be performed by the VRV/VRF units. The 3 phase power shall be supplied in each outdoors units.The VRV/VRF units shall be BMS compatible. Supply,Lifting, Shifting, Installation, Testing and Commissioning of Outdoor Units Equipped with Highly efficient Multiple scroll Compressors with Variable speed in each outdoor unit.
20 HP ODU
2
-
-
CASSETTE UNIT - Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System or fire panel and the unit shall come along with fresh air flexible duct system as per drawing. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
2.0 TR
12
-
-
CASSETTE UNIT - Supply, installation, testing and commissioning of following minimum capacity 4-way flow nVRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System or fire panel and the unit shall come along with fresh air flexible duct system as per drawing. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
2.5 TR
2
-
-
Supply,installation,testing and commissioning of Imported Y/T refnet Joints with insulation to connect indoor units with main header as per drawing. It should be complete as per manufacturing standards & as per directions of Engineer-in-charge .
(1 Set will comprise of 2 Y/T Refnet Joints each for sution & discharge side)
15
-
-
Self Diagnostic Type Individual Remote Controllers (Cordless Type)
Supply, Installation, Testing & Commissioning of Cordless Type Self Diagnostic Type Digital Programmable Individual Remote Controllers of latest generation for setting required temperature for various Indoor Unit.
14
-
-
Supply,Lifting, Shifting, Installation, Testing and Commissioning of Master Remote Control panel to connect group of indoor units. Master Remote Control Panel shall be one touch screen type . Master Remote Control panel shall be as per specification.
1
-
-
Corrosion Prevention Chemical Coating for Air- Conditioning System
Outdoor Unit - 20 HP ODU
2
-
-
Corrosion Prevention Chemical Coating for Air- Conditioning System
Cassette AC Unit:- 2.00TR
12
-
-
Corrosion Prevention Chemical Coating for Air- Conditioning System
Cassette AC Unit:- 2.5TR
2
-
-
Supply, installation, testing and commissioning of interconnecting high pressure copper refrigerant piping work including vaccumiazation and Nitrogen testing suitable for refrigerant R 410A duly insulated with FACTORY PREFORMED TUBULAR EPDM RUBBER FOAM SECTIONS with completely closed cell structure as per specifications - Density 40-60 kg /cum , Class A as per ASTM E 84 , Class V-0 as per UL 94 and Mu value 7000 between indoor & outdoor units as per specifications. External refrigerant piping shall be laid on 16 G GI covered perforated cable trays. Piping inside occupied area & vertical shaft inside the AHU Room shall be supported using 16 G GI hangers. All exposed pipe shall have UV coating on insulation & cost to be included in the piping.
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
15
-
-
Supply, installation, testing and commissioning of interconnecting high pressure copper refrigerant piping work including vaccumiazation and Nitrogen testing suitable for refrigerant R 410A duly insulated with FACTORY PREFORMED TUBULAR EPDM RUBBER FOAM SECTIONS with completely closed cell structure as per specifications - Density 40-60 kg /cum , Class A as per ASTM E 84 , Class V-0 as per UL 94 and Mu value 7000 between indoor & outdoor units as per specifications. External refrigerant piping shall be laid on 16 G GI covered perforated cable trays. Piping inside occupied area & vertical shaft inside the AHU Room shall be supported using 16 G GI hangers. All exposed pipe shall have UV coating on insulation & cost to be included in the piping.
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
15
-
-
Supply, installation, testing and commissioning of interconnecting high pressure copper refrigerant piping work including vaccumiazation and Nitrogen testing suitable for refrigerant R 410A duly insulated with FACTORY PREFORMED TUBULAR EPDM RUBBER FOAM SECTIONS with completely closed cell structure as per specifications - Density 40-60 kg /cum , Class A as per ASTM E 84 , Class V-0 as per UL 94 and Mu value 7000 between indoor & outdoor units as per specifications. External refrigerant piping shall be laid on 16 G GI covered perforated cable trays. Piping inside occupied area & vertical shaft inside the AHU Room shall be supported using 16 G GI hangers. All exposed pipe shall have UV coating on insulation & cost to be included in the piping.
15.9 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
15
-
-
Supply, installation, testing and commissioning of interconnecting high pressure copper refrigerant piping work including vaccumiazation and Nitrogen testing suitable for refrigerant R 410A duly insulated with FACTORY PREFORMED TUBULAR EPDM RUBBER FOAM SECTIONS with completely closed cell structure as per specifications - Density 40-60 kg /cum , Class A as per ASTM E 84 , Class V-0 as per UL 94 and Mu value 7000 between indoor & outdoor units as per specifications. External refrigerant piping shall be laid on 16 G GI covered perforated cable trays. Piping inside occupied area & vertical shaft inside the AHU Room shall be supported using 16 G GI hangers. All exposed pipe shall have UV coating on insulation & cost to be included in the piping.
19.1 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
15
-
-
Supply, installation, testing and commissioning of interconnecting high pressure copper refrigerant piping work including vaccumiazation and Nitrogen testing suitable for refrigerant R 410A duly insulated with FACTORY PREFORMED TUBULAR EPDM RUBBER FOAM SECTIONS with completely closed cell structure as per specifications - Density 40-60 kg /cum , Class A as per ASTM E 84 , Class V-0 as per UL 94 and Mu value 7000 between indoor & outdoor units as per specifications. External refrigerant piping shall be laid on 16 G GI covered perforated cable trays. Piping inside occupied area & vertical shaft inside the AHU Room shall be supported using 16 G GI hangers. All exposed pipe shall have UV coating on insulation & cost to be included in the piping. Cable tray is quantified seperately.
22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
15
-
-
Supply, installation, testing and commissioning of interconnecting high pressure copper refrigerant piping work including vaccumiazation and Nitrogen testing suitable for refrigerant R 410A duly insulated with FACTORY PREFORMED TUBULAR EPDM RUBBER FOAM SECTIONS with completely closed cell structure as per specifications - Density 40-60 kg /cum , Class A as per ASTM E 84 , Class V-0 as per UL 94 and Mu value 7000 between indoor & outdoor units as per specifications. External refrigerant piping shall be laid on 16 G GI covered perforated cable trays. Piping inside occupied area & vertical shaft inside the AHU Room shall be supported using 16 G GI hangers. All exposed pipe shall have UV coating on insulation & cost to be included in the piping. 28.6 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
15
-
-
Supply, installation, testing and commissioning of interconnecting high pressure copper refrigerant piping work including vaccumiazation and Nitrogen testing suitable for refrigerant R 410A duly insulated with FACTORY PREFORMED TUBULAR EPDM RUBBER FOAM SECTIONS with completely closed cell structure as per specifications - Density 40-60 kg /cum , Class A as per ASTM E 84 , Class V-0 as per UL 94 and Mu value 7000 between indoor & outdoor units as per specifications. External refrigerant piping shall be laid on 16 G GI covered perforated cable trays. Piping inside occupied area & vertical shaft inside the AHU Room shall be supported using 16 G GI hangers. All exposed pipe shall have UV coating on insulation & cost to be included in the piping.
34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
15
-
-
Supply, installation, testing and commissioning of interconnecting high pressure copper refrigerant piping work including vaccumiazation and Nitrogen testing suitable for refrigerant R 410A duly insulated with FACTORY PREFORMED TUBULAR EPDM RUBBER FOAM SECTIONS with completely closed cell structure as per specifications - Density 40-60 kg /cum , Class A as per ASTM E 84 , Class V-0 as per UL 94 and Mu value 7000 between indoor & outdoor units as per specifications. External refrigerant piping shall be laid on 16 G GI covered perforated cable trays. Piping inside occupied area & vertical shaft inside the AHU Room shall be supported using 16 G GI hangers. All exposed pipe shall have UV coating on insulation & cost to be included in the piping. 41.30 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation
15
-
-
Supply, installation, testing and commissioning of condensate drain water piping of GI 'Medium' class complete with fittings like elbows, tees, reducers, bends, MS flanges, supports, welding, painting etc. as required conforming to tender specifications and of following sizes. Complete pipe shall be duly insulated with fire retardent Closed Cell Elastomeric Nitrile Rubber of specified pipe section of specified thickness in the tender specification & suitable for indoor / outdoor application. Complete pipe insulation shall also have 200 g/m² factory laminated, treated woven Glass Cloth coating for mechanical protection or manufacturer supplied jacketing.
32 mm dia pipe, 13 mm Insulation
50
-
-
Control cabling (PVC insulated Copper conductor of 1.1 KV Grade armoured cable) along with suitable size PVC conduit
3C x 1.5 Sq. mm
60
-
-
Power & Control Cabling
For VRV ODU Unit (From Panel to Isolators near ODU)-1 x 4C x 16 Sq. mm
60
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 63A, 415 V, on surface/ recess, weather proof (outdoor) complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/MCCB/Isolator)
Single door
2
-
-
Power & Control Cabling
Supplying and fixing following rating, four pole,63A 30mA 415 V RCCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63A 30mA 415 V RCCB
2
-
-
Earthing Strip / Wires as per specs.
Supply & laying of 6 SWG GI wire or in recess for loop earthing as required.
50
-
-
Copper flexible cable for earthing
1 C* 6 sqm
15
-
-
Copper flexible cable for earthing
1 C* 10 sqm
15
-
-
LV SYSTEM
-
-
-
Supplying, installation, testing & commissioning of intelligent analog addressable Photothermal/Multicriteria
Detector complete with mounting base complete as required
40
-
-
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two
LED, metallic cover complete with all connections etc as required.
40
-
-
Supply and drawing of UTP 4 pair 23 AWG CAT 6A LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required.
Cable Dia 8.0 mm with beneding radius -4 X Cable Diameter Operates at frequency of 500 Mhz
100
-
-
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper
conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene
Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath
complete as required
2 x 1.5 sq.mm
100
-
-
ELECTRICAL WORKS
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-A (Upto 3mtr.)
40
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group-B (Upto 4mtr.)
100
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C (Upto 5mtr.)
50
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
750
-
-
Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
25
-
-
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
135
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
4Way (8+12) Double door
2
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
4 Way (8 + 36) Double door
1
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63 Amp
3
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioninq etc. as required.
Single Pole
60
-
-
Supplying and fixing following rating, four pole, 415 V, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63A
3
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Up to 35 Sq mm
150
-
-
Supply, Installation, Testing & Commissioning of the 20 W, 4 Ft. LED Tube Light, Color temperature should be-6500k
Acceptable Make - Philips/ Bajaj/ Havells / CG
15
-
-
Supply, Installation, Testing & Commissioning of the 10 W, 2 Ft. LED Tube Light,Color temperature should be-6500k
Acceptable Make - Philips/ Bajaj/ Havells / CG
7
-
-
Supply, Installation, Testing & Commissioning of the 10 W, IP65, LED Bulk Head Lighting Fixture,Color temperature should be-6500k
Acceptable Make - Philips/ Bajaj/ Havells / CG
3
-
-
Supply, Installation, Testing & Commissioning of the 2 Ft X 2 Ft , 40 W, Cool White Panel LED Lighting Fixture, Color temperature should be-6500k
Acceptable Makes – Havells, Philips, Crompton Greaves, Bajaj, Wipro, GE, Syska
70
-
-
Supply, Installation, Testing & Commissioning of the Garnet LED stip 2700K, 25W,5Mtr,60LED/mtr with driver 240AC /12V DC Acceptable Makes – Havells, Philips, Crompton Greaves, Bajaj, Wipro, GE, Syska
24
-
-
Supply, Installation, Testing & Commissioning of the 300 MM Sweep Exhaust Fan, Acceptable Make - Philips/ Bajaj/ Havells / CG
5
-
-
Supply, Testing & Commissioning of 4 C X 16 Sq. mm 1.1 KV Grade XLPE Insulated & sheathed Copper Conductor armoured cable including cable laying/dressing ,glanding, thimbiling & termination.
150
-
-
Supplying and Fixing Recessed downlight Blaire with HPE (High-Performance Efficiency) with LED (Light
Emitting Diode), system power: 12 W, Luminous flux of luminaire 1200 lm, Colour temperature of 6500 K,
Cool white, CRI 90, MACDAM 3, P.F0.95, THD5%, 230V constant current driver, 70% of luminous
flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium,
Polyester powder-white coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for
homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear,
Protection class II, IP 40,
Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm
Make : REGENT/PHILIPS
Product Code : LED 3445
25
-
-
Supplying and Fixing Pendant luminaire Slash S with HE-High Efficiency LED (Light Emitting Diode) system
power: 22W, luminous flux of luminaire 2420 lm, colour temperature of 6500K, cool white, CRI90,
MACDAM 3, P.F0.95, THD5%, 230V constant current driver, 70% of luminous flux after 50,000
operating hours, energy efficient LEDs, direct light emission, powder coated aluminium white luminaire profile,
Satin diffuser for a homogenous light distribution, ZHLS(ZERO HALOGEN LOW SMOKE) internal wiring,
integral electronic control gear Protection class I, IP40
Dimension-157*157*1500
MAKE : PHILIPS
Product Code : 58074
10
-
-
Supplying and fixing of following sizes of PVC conduit (heavy duty) along with accessories in surface/recess including
painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit
as required.
20 mm
100
-
-
Supplying and fixing of following sizes of PVC conduit (heavy duty) along with accessories in surface/recess including
painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit
as required.
25 mm
100
-
-
SITC LED Tube Mirror Light
Brand-PHILIPS
Colour-Bronze
Material-Metal
Style-Muziris Picture Light - 12W
Light fixture form-Picture
Room Type-indoor
Product Dimensions-19.6L x 7.1W x 3.7H Centimeters
Color temperature should be-2700k
Indoor/Outdoor Usage Indoor
Power Source Corded Electric
8
-
-
SITC Mini Marathon LED Rope Light with Connector | 20 Meter IP 65 Water-Proof Strip Light with 400 lumens/Meter
Colour-Warm White
Brand-PHILIPS
Color temperature should be-2700k
Special Feature Long Coverage, Superior Light Output, Robust Material
Light Source Type-LED
Power Source-Corded Electric
Light Colour-Warm White
Style-Mini Marathon 20M
Material-Silicon
The item is complete and any other work required for making cove loght operational is included in this item like adapter etc
5
-
-
SITC Round LED Bathroom Mirror
Frame-Material Glass
Mounting Type-Wall Mount
Finish Type-Polished
Color temperature should be-2700k
Surface Recommendation-Glass
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%