Dr Harisingh Gour University Tender

Steel chair -Steel chair of size 910x500x560D mm ERW (MS) Tube frame of dia 25mm, 14gauge MIG/TIG Welded, with perforated sheet & back of 18 swg CRC sheet good quality PVC shoes & cap with all Steel parts of powder coated with high quality powder after minimum Ten tank anti rust treatment, and all fastener ,as per drawing and as per direction

Library Book Case Four doors Book case in latest design with glass panels, inside sliding glass shutter, lock & S.S. common keys induplicate. Overall size: H-1740 to 1750 × W-915 to 920 × D-320 to 330(mm) Material Specifications: • The raw material used will be PRIME quality CRCA as per IS 513 (1994,1998) ‘D’ grade. • OEM must enclose Proof of purchase of steel from SAIL/Tata Steel/Essar/ Jindal. • The material used for constructing the bookcase will be prime quality Cold Rolled Close Annealed (CRCA) Steel (for doors and shelves 1.0 mm & other parts as per functional requirements). • All the 4 doors will have cam lock with common key. • Each door will have 3 mm thick transparent glass for clear inside vision secured in a metal frame through rubber gasket. • Each doors will have a scissor mechanism for receding inside the top of respective compartment and ensure parallel and smooth movement. • Each door will have easy grip handles. • Each door will have plastic side end caps as handles which is easy to grip. • Good quality lock and S. S. Keys in duplicate. • Adjustable stud provided to protect from water during floor cleaning. • Finishing: All steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment and B grade phosphating (in house) & same will be demonstrated to the purchaser during pre-dispatch Inspection. • OEM should have ISO 9001, 14001, 45001 certificates and BIFMA international & IGBC green membership & quality match with the standards of ISO & ANSI BIFMA.

Reading Table - Conference cum Multipurpose Table Size: W-272 x D-109 x H-75 (cm) Material Description: • Main top 25mm thick MR grade hard wood ply high quality .8 to 1mm thick lamination ) with 2mm PVC edge band by hot melt glue process for beading all over edge. • Top frame of 1.61mm thick. (16swg) CRCA Channel IS 513. • Table frame structure made up of prime quality MS ERW square tube 40x40mm of 16swg. • Good quality PVC Shoes. • All steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment and B grade phosphating (in house) & same will be demonstrated to the purchaser during pre-dispatch Inspection. • Vendor’s should have NABL calibrated testing equipment and same should be provided during pre-dispatch inspection if applicable. • OEM should have ISO 9001, 14001, 45001 certificates and BIFMA international & IGBC green membership & quality match with the standards of ISO & ANSI BIFMA.

Student Dual Desk-Two Seater Desk Cum Bench. Overall size: H- 750 to 760 × W-1048 to 1050 × D-900to 925(mm) Seat Height: 410 mm Material Description: • Seat & Back of the desk is 18 mm thick laminated MR grade hard wood ply with • 0 .8 mm thick lamination with 2mm teak beading all over 4 edges. • Storage Shelf & Knee Panel of 22swg (0.8mm) thick. CRCA sheet IS 513 Grade. • Vertical panel of 18swg (1.2mm) CRCA sheet IS 513 Grade. • Bench frame of 25x25x1.61mm (16swg) thick. square ERW tube. • Good quality PVC Buffer. • All steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment and B grade phosphating (in house) & same will be demonstrated to the purchaser during pre-dispatch Inspection. • OEM should have ISO 9001, 14001, 45001 certificates and BIFMA international & IGBC green membership & quality match with the standards of ISO & ANSI BIFMA. • Vendor’s should have NABL calibrated testing equipment and same should be provided during pre-dispatch inspection if applicable.