Directorate Of Health Services Tender

Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786

Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

M-20 Grade Concrete

Brick work with well burnt chimney bricks in bulls patent trench kiln ,crushing strength not less than 25kg /sqcm and water absorption not more than 20% in foundation and plinth

Cement Mortar 1:6 (1 cement : 6 sand).

12 mm cement plaster of mix :

1:6 (1 cement: 6 sand)

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete.

Galvenised M.s Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

13.46 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :

Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm.

110 mm diameter (minimum wall thickness 3.2mm)

75 mm diameter (minimum wall thickness 3.2mm)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

25 mm nominal outer dia .Pipes.

15 mm nominal outer dia .Pipes.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

15 mm nominal bore.

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Hot finished welded type tubes

Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mmdeep ribs with subtle square fluting in the five pan at nominal203 mm centre-to-centre. The end rib shall be designed foranti-capillary action, to avoid any seepage of water throughthe lateral overlap. The profile sheet of0.5 mm thick,Hi-strength steel with min. 550 MPa yield strength, metallichot dip coated with Aluminium-Zinc alloy (55% Aluminium,45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150gms/sq.mt total on both sides) with steelquality paint coat. The paint shall have a total coating thickness of nominal 35 μm, comprising of nominal 20 μmexterior coat on top surface and nominal 5 μm reverse coaton back surface over nominal 5 μm primer coat on bothsurface. The sheet shall have brand marking of themanufacturer giving product details on the back of the sheetat every 1 meter c/c for confirming genuinity of the material.The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Roofing sheet