Directorate Of Sports And Youth Welfare Tender

SPORTS LED DMX FIXTURE :--

Supply of LED sports ight luminaire with a U-mounting bracket and housing made of Die-cast Aluminimum with polycarbonate lens having CRI 90, SDCM5 and CCT of 5700K and shall be compliant with IP66 and IK08 classification. Luminaire shall be designed to emit at least 162000 nominal lumens with maximum system wattage of 1620W at a system efficacy of at least 100 lumen/watt. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 35 deg C. The luminaire should have choice of Narrow beam, symmetrical medium and symmetrical wide beam suiting various applications with exposed PC optic lens. The luminaire should have fins on the back to ensure good heat dissipation through ventilation fan IP 66 protection minimum 6-8 forthermo cooling and to prevent dirt from settling on the luminaire along with aiming angle scale. The luminaire should be marine salt protected, vibrations proof and wind force protected. The luminaire enables interfacing with an external light console to mix SportsStar LED with other DALI/ DMX fixtures. The electronic driver should be fully integrated and shall have a power factor 0.95 and THD 10% with a minimum inbuilt surge protection of 10kV inbuilt in the driver and suitable for an operating temperature range of -40 to 50 deg C. The luminaire should comply with all the required IEC and IS standards. LM79 and LM80 reports must be submitted from a NABL accredited laboratory. Luminaire and driver must have BIS certificate and the same must be submitted for record. for fixture and driver(Thedriver and fixture are of same company).Philips BVP680 LED1620/957 1620W & driver EVP400 with equivalent make in similar specifications.

DMX CONTROLSYSTEM-DMX controller and control cable as OEM design standard, detail to be given in tender bid. Kindly consider DMX interface controller with panel for programming. Pl considers One advance Laptop for programming and one small UPS for DMX controller only. Location control room. Master controller in BMS room or broadcaster room. Bidder has to consider BMS interface to provide lighting control from BMS also. Main console should operate independently with AV for major event and all other event should control from BMS. Bidder to consider control cable inside the control room only . All DMX driver inside the control room.Pl refer control wiring block diagram. Please refer scene setting.