Border Security Force Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Border Security Force - BSF Tender
Civil And Construction
Building Construction
Eprocure
Opening Date5 Sep 2024
Closing Date12 Sep 2024
Tender Amount₹ 99,61,559
Costs
EMD
₹ 1,99,232Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BSF_824337_1Bid Award Id
ViewTender No
07/ NIT/STC/ENGG/2024-25Tender Authority
Border Security Force ViewPurchaser Address
-Website
http://http://bsf.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Centering and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges
24.58
20031
814.95
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
305.5
27388
89.65
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
2.57
17111
6658.25
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand)
102.65
86005
837.85
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade, Area of slab over 0.50 sqm
5.25
23233
4425.35
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood
1.37
146207
106720.85
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class teak wood, 30 mm thick
77.76
316133
4065.5
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
108.5
198555
1830
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
67.41
135881
2015.75
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters, With ISI marked stainless steel butt hinges of required size, Second class teak wood
121.5
545468
4489.45
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
240
43440
181
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm
7.7
8969
1164.9
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
18
2986
165.9
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm
72
5374
74.65
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm
120
6366
53.05
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
112
3942
35.2
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm
60
1695
28.25
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Frame size 45 x 85 mm
29.7
24738
832.95
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).30 mm thick
7.88
31157
3954
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 30 mm thick shutters, With ISI marked stainless steel butt hinges of required size, Second class teak wood
11.25
45068
4006.05
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
119.7
13723
114.65
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
269.24
381418
1416.65
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
30.96
32924
1063.45
Providing and laying Ceramic glazed floor tiles of size 300x300 mm
(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
59.7
55855
935.6
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
135
43166
319.75
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm
10
1199
119.95
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door, 110x110x110 mm
10
2054
205.45
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door, 110x110x110 mm
10
1907
190.75
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°, 110 mm bend
72
9504
132
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain)
72
8348
115.95
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
108
31843
294.85
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)
160
51888
324.3
15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
142.72
60156
421.5
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
60
26565
442.75
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats
1165.85
138969
119.2
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat
3302.75
263229
79.7
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
1582.87
208068
131.45
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2200
272470
123.85
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)
51.84
23965
462.3
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
30.8
29012
941.95
Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
32.73
44223
1351.15
Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets
120
7926
66.05
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
8460.7
176405
20.85
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
3077.79
343481
111.6
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
18
36127
2007.1
Demolishing R.C.C. work manually/ by mechanical means including
stacking of steel bars and disposal of unserviceable material within
50 metres lead as per direction of Engineer - in- charge.
6.48
18974
2928.1
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
131
39653
302.7
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
1497.3
2555292
1706.6
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and
pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
41.04
83662
2038.55
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
240.6
13425
55.8
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
229.14
156193
681.65
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
3
17344
5781.35
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
1
5540
5540.55
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern
1
11256
11256.4
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap
4
11862
2965.6
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto
1 metre long with S.S. triangular plate to Eureopean type W.C. of
quality and make as approved by Engineer - in - charge.
1
299
299.35
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe, 32 mm dia
12
1091
90.95
Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete.
6
8466
1411.15
Providing and fixing soil, waste and vent pipes : 100 mm dia,Sand cast iron S&S pipe as per IS: 1729
36
36295
1008.2
Providing and filling the joints with spun yarn, cement slurry and
cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe
30
4903
163.45
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Sand cast iron S&S as per IS - 1729
6
3184
530.7
Providing and fixing plain bend of required degree. 100 mm dia, Sand cast iron S&S as per IS - 1729
12
4955
412.95
Providing and fixing double equal plain junction of required degree. 100x100x100x100 mm, Sand cast iron S&S as per IS - 1729
6
5167
861.2
Providing and fixing terminal guard : 100 mm, Sand cast iron S&S as per IS - 1729
6
2357
392.9
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe
12
3701
308.45
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and testing of joints completeas per direction of Engineer in Charge. Internal work - Exposed on wall, 25 mm nominal outer dia Pipes
76
31049
408.55
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls
etc. 20 mm nominal outer dia Pipes
6
3082
513.75
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
7
5299
757.1
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work, 32 mm nominal outer dia Pipes
15
6525
435.05
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
6
3194
532.35
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore
7
2794
399.15
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. : 45 cm length, 15 mm nominal bore
14
1510
107.9
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter
7
1164
166.35
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
1712
1712.15
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bore
7
2023
289.05
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore
7
2585
369.35
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 32 mm nominal bore
7
2866
409.45
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
9700
9.7
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
7
3039
434.2
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
5
3575
715.05
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore
6
3568
594.75
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931,15mm nominal bore
14
7004
500.35
Providing and fixing PTMT grating of approved quality and colour. Circular type 100 mm nominal dia
28
929
33.2
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 25mm nominal bore, weighing not less than 62 gms
7
703
100.55
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
278
39559
142.3
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. E.R.W. tubes
548.6
82509
150.4
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm
70
2040
29.15
Providing, mixing and applying SBR polymer of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt, of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 25 mm average thickness in 2 layers.
28.8
14700
510.45
Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge
315
149357
474.15
Add multiplying factor 1.0633 for increase in DSR rates i.e from 12 to 18 % on DSR items as per CPWD L/No. 331 dtd 10/08/2022
1
471473
471473.37
Deduct for handing over the old rusty used iron frame & grill to the contractor/ firm for further resale to kawadi or disposal at his end. Final bill will be processed only after cleaned off dirt, rubbish, & lifting off condemned stores etc. from site and no any loading, unloading, transportation or any other charges will be paid by the department.
329.4
-10158
-30.84
Providing and fixing 4 mm semi flexible G.I wire in existing M.S U type bolt including tightening etc. all complete and as per the direction of Engineer-in-charge.
95.17
19598
205.93
Providing and fixing 8.0 mm mild steel M8 eye hook to turnbuckle with 8 mm M.S U bolt by drilling, anchoring and making good the wall surface all complete and as per the direction of Engineer-in-charge.
96
18574
193.48
Providing and fixing MS/oxidised mild steel clips for 110 mm uPVC rain water pipe with required PVC/wooden raw plug , screwed with M.S. screws of required length etc. all complete and as per direction of Engineer-in-charge. 110 mm
180
12528
69.6
Providing and fixing 1.0 mm MS sheet with riveted, bolted or welded in built up section including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete and as per the direction of Engineer-in-charge.
5.42
5608
1034.83
Rubbing, Polishing of existing kota stone including filling jointed with grey cement slurry mixed with pigment where required all complete and as per the Direction of Engineer-in-charge.
55.8
15666
280.77
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.. Group C
15
22005
1467
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.. Group C
20
17880
894
Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.
3
2682
894
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
228
76152
334
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as rerquired. i) 2 x 1.5 sqmm + 1 x 1.5 sqmm earth wire
212
49396
233
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as rerquired. ii) 4 x 4 sqmm + 2 x 4 sqmm earth wire
408
219096
537
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required..1 x 1.5 sqmm
200
9000
45
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.. 2 x 1.5 sqmm + 1 x 1.5 sqmm earth wire
151
14345
95
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 4 sq. mm
120
24720
206
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 6 sq. mm
50
15200
304
Supplying and fixing of following sizes of medium class PVC conduit/casing caping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20/25 mm
250
32000
128
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
51
2040
40
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.2 Module (75mmX75mm)
36
10728
298
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.3 Module (100mmX75mm)
18
5886
327
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.4 Module (125mmX75mm
40
13720
343
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.6 Module (200mmX755mm)
36
14472
402
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.8 Module (125mmX125mm)
132
59928
454
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.12 Module (200mmX150mm)
8
4376
547
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
582
59946
103
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 A socket outlet
137
16714
122
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
134
90584
676
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
68
39848
586
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
2
1454
727
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
154
13398
87
Supplying and fixing brass batten/ angle holder including connection etc. as required.
29
3799
131
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without CB/RCCB/Isolator) 12 way , Double door
4
9260
2315
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required. Single pole
80
20480
256
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 200 A,36KA,FPMCCB
2
30412
15206
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
4
4676
1169
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A
18
48996
2722
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
13710
6855
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. wire in 15 mm dia G.I. pipe from earth electrode including connection with GI thimble excavation and re-filling as required.
10
2870
287
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
30
2100
70
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
44832
7472
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
29
20474
706
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
16
3904
244
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
12
6216
518
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
20
2260
113
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
496
62496
126
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
28
5516
197
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
2
242
121
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finishpaint etc. as required.
1
1477
1477
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.. 90 mm dia (OD-90 mm & ID-76 mm nominal)
5
850
170
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including xcavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal)
77
22330
290
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 35 sq. mm (32mm)
4
1476
369
Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required.
140
36540
261
Add multiplying factor 1.0633 for increases in GST Rates i.e from 12 to 18 %on DSR Items as per CPWD Letter No 331 dtd 10/08/2022
1
73459
73458.76
Supplying and Fixing of 20/22 W LED Batten, 4 feet btten with aluminium housing & intergrated electronic driver, type 6000k/4700k luminaire coolday suitable for surface/Pendant mouting i/c all accessories of make-Wipro/Havells/Philips/Crompton or similar approved by Engg-incharge
196
68600
350
Supplying, Installation, testing and commissioning of 10 W 6500 K MIRROR LIGHT , complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Make - Philips / CG/ LEDVANCE /Wipro/Orient)
10
2970
297
Providing,installing,testing and commissioning of 12/15 Watt LED 6500 K,Panel Round make installation in recess/surface mouting which provide soft light and glare free symmetrical illumination.LED lighting fixture directly on ceiling,including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.Make CG/ Phillips/ Equivalent specification.
38
46512
1224
Providing, Installation, testing and commissioning of Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs. energy saving 10 W LED HEXA 10 W - IP66, HAVELLS MAKE bulkhead luminaire for r outdoor and indoor areas directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as equired. similar model of Philips / CG/Ledvance /Wipro/Helonix)
6
10296
1716
Supplying and fixing of 300 mm Sweep , 1400 RPM Turbo Force , double ball bearing HD, Exhaust Fan, Single phase, 240 volt with Louver/ Shutter of Bajaj/Havells/ CG/Usha/Khaitan make..
16
71680
4480
SITC of LED Security light luminaire of Havells MAKE Model CAT LHEXAYP7PN6K050 LED Security light made up of pressure die cast housing with toughened glass and high power LEDs with secondary optics with IP65 protection. External SPD can be ordered separately.Efficacy ≥ 110LPW fitting with die cast aluminium housing IP65 protected body on existing 32mm dia G.I pipe bracket including wiring by FRLS wire (1.5sqmm) etc as required.50 WATTS ..(Philips/C&S/CG)
4
14576
3644
Providing, Installation, testing and commissioning of energy saving, IP66, 100 watt flood light luminaire with made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses and electronic driver , directly on wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Make Havells Model Endura pearl Neo / Philips/Crompton/Ledvance/Havells
10
42920
4292
Providing and laying of one number 4C X 35 Sq. mm 1.1 KV grade aluminum conductor armored cable(Havells/L&T/POLYCAB/KEI), PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV following size in the existing RCC/ HUME/ METAL pipe as required.
90
52920
588
Providing and laying of one number 4C X 120 Sq. mm 1.1 KV grade aluminum conductor armored cable(Havells/L&T/POLYCAB/KEI), PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV following size in the existing RCC/ HUME/ METAL pipe as required.
80
128080
1601
Supplying, Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of one number 4C X 35 Sq. mm 1.1 KV grade aluminum conductor armored cable(Havells/L&T/POLYCAB/KEI) on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
20
11920
596
SITC of Storage type water heater, vertical wall mounted, 50 litre capacity, 230 Volts, 50Hz, Single phase, 2 KW, 4 star rated (Havells Make) or compatible model from Venus/CG/Bajaj/Recold ) including connections etc at site as reqd.
4
92940
23235
Making hole below the existing road for passing the undergroung LT cable and GI Pipe/UPVC pipe for electric power supply with help of hole making equipments and skilled labour and helper etc. as required.
5
4480
896
Supplying and laying of following size HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (50 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.40 mm dia
30
5010
167
Supplying and drawing of 3CX2.5 SQMM Havells Make PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 2010 in the existing RCC/ HUME/ METAL pipe as required.
40
6600
165
Providing, laying and fixing 40 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required.
6
2406
401
Supplying & erection of Medium class G.I pipe 50 mm dia, 3 meter along with G.I Base Plate 300X300X5MM with 20 mm dia hole at the Bottom for making connection from looping box to light fitting conforming to IS:1239 PART-1 (2004) .
6
11490
1915
Providing, Installation, testing and commissioning of globe type polycarbonate post top lantern, Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base. complete with all accessories, lamp holder, (without lamp) including fixing on existing gate pillars/exiting G.I. pipe, suitable for LED lamp Upto 1 N x 20 W LED Lamp directly on existing gi pipe, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as equired. similar model of Philips / CG/Ledvance /Wipro/Helonix/Havells)
6
6036
1006
Providing and fixing of LED 20 W B22 type 2/3/5 STAR LAMP (Philips/CG/Havells) on existing lamp holder etc as required.
6
2490
415
Suppling and fixing of Cable junction boxes, Polycarbonate, IP 67, Metric knockouts for cable entry with terminals (5 Nos.) cable looping box of size 100 x 100 x 75, DP MCB B series 0-32 amps (Syntex Make- Fibox/Syntex/Hensel and other approved make) at bottom of the existing GI light pole of dia upto 65mm with suitable DK Pole Mounting Kit, terminating incoming and outgoing cable etc as reqd
6
22662
3777
Design, fabricate and installation testing commissioning of outdoor weather proof/vermin proof compartmentalized feeder pillar drip proof tepe end bending top roof design distribution panel of 415 V, 3 phase, 4 wire, 50 Hz A.C. outdoor type compartmentalized, totally enclosed and Double Door type, weather proof/ vermin proof distribution panel of suitable size to accommodate the following mountings thereon. It shall be fabricated from 50 mm x 50 mm x 6 mm angle iron (where ever necessary ) frame work and minimum 2 mm thick CRCA sheet complete with hinged doors having locking arrangement and providing detachable gland plate at the bottom of the panel, complete with 400 amps 4 nos Aluminium bus bar, suitable rating inter-connections, earthing, testing and commissioning, etc as required. . (Minimum size of panel 100 mm x 100 mm x 450 mm ). The panel shall be powder painted with approved brand & shade and supplied with suitable pedestal of 50mm x 50 mm x 6 mm angle iron frame with 900 mm long legs . The panel shall be mounted on suitable plain cement concrete (PCC) foundation 40 cms. below ground level and 50 cms. above ground including finishing and supplying and fixing following component/acessories & switch gears etc complete as required. (minimum size of panel 1000 mm x 1000 mm x 450 mm) . including wiring by copper multistranded FRLS insulated wires and thimbling complete with following accessories mentioned below etc as required. (MAKE CPRI APPROVED PANEL BUILDER). - 1.0 Sqm
1) 160 Amp FP MCB 36 KA (Havells/ C&S/ Schneider). 01 Nos Make Legrand cat no. 4200 95 - 01 nos
2) 100 Amp FP MCB 36 KA (Havells/ C&S/ Schneider). 04 Nos Make Legrand cat no. 4200 95
3) 63 Amp 4P C Curve MCB sort circuit Breaking capacity -10 kA (10 kA ISI marked as per IS/IEC 60898-1 2002) - 04 NosMake Legrand cat no. 4087 02
4) Multifunction meter L&T cat No. WL440531OOOO - 01 nos
5) 400/5A rating busbar type rish xmer standard secondary current 5A, Primary current 400A, Type 86/50 (45) class 0.5s, 15VA, Rish Xmer, Standard Secondary current: 5A, XM19 - 03 Nos
6) Indicator Lamp LED type. 3 Nos
1
131284
131284
Supplying and fixing of Havells Make Four pole , sheet steel , Busbar Chamber , 100 amp,415 volts , on surface / recess, complete with Aluminum busbar ,earth terminal,painted including earthing etc as site as required or other equilent Make - C & S /L&T/HILITE'S/ABB
1
10216
10216
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements