Board Of Secondary Education Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Board Of Secondary Education Tender
Civil And Construction
Eprocure
Opening Date11 Jan 2024
Closing Date30 Jan 2024
Tender Amount₹ 99,25,000
Costs
EMD
₹ 99,250Document Cost
₹ 10,000Tender Fee
₹ 1,172
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MPBSE_325875_1Bid Award Id
ViewTender No
TN/227/Bldg/e Tender/24 BPL dt 09-01-2024Tender Authority
Board Of Secondary Education ViewPurchaser Address
-Website
http://http://rajeduboard.rajasthan.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below.
20
660
33
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
150
1950
13
Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete.
-
-
-
G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height.
50
3100
62
Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height.
150
6750
45
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand).
200
36000
180
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size).
75
18525
247
Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer.
120
5280
44
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge.
180
42480
236
Neat cement punning
120
3600
30
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase
75
7425
99
Grading roof for receiving water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size)
35
229915
6569
Providing water proofing treatment over Roof, Wall, Chhajjas, Balcony with Rubberized elastomeric cold applied liquid waterproofing membrane blend of special resin and rubber with more than 1300% elongation (confirming ASTM-D2370-98), at leakage/seepage area consisting of the following operation. (i) Removal of damaged waterproofing treatment if any like bituminous membrane / plaster/ brick bat koba/screeding etc. (ii) Surface preparation: Roughening of surface by scrubbing with steel wire/Nylon brush/Removing all dust particles and washing with adequate water to clean completely, opening of cracks in 'V' groove in size of 5mmx10m (WxD), filling of cracks with elastomeric creak filler/PU sealent repair of potholes and holor making on roof surface by polymer mortar with adding SBR bonding agent.(iii) Providing and applying 1st coating of rubberized elastomeric liquid membrane as primer (ratio 1:2 1 part liquid membrane and 2 part water) by brush/Roller/Spray having minimum thickness of 70-80 micron. Allow the coating to set in natural air for minimum 2 hrs, then put reinforcement by laying 45gsm fibre glass mesh and applying 2nd coat of rubberized elastomeric liquid membrane (Ratio: 1 part membrane and 20% water) with minimum thickness 100-120 micron. Allow the coating to set in natural air for minimum 12 hrs.(iv) Providing and applying 3rd coat of rubberized elastomeric liquid membrane (Ratio:1 part membrane and 10% water). Total DFT (Dry film thickness) thickness after 3rd coat must be 280-300 micron and consumption in three coats @ 6.5kg for 10sqm. (v) Providing and applying 4th and 5th coat of High quality waterproof membrane in white colour, single component special synthetic resin based flexible thixotropic white color coating with excellent UV resistance (SRI-144) with more than 300% elongation (confirming ASTM D 412-98) in ratio: 1 part membrane and 10% water thickness of 200 micron DFT in two coats, with average consumption @ 5kg per 10 sqm. After application of fourth coat let it air dry for minimum 3 hrs before application of fifth coat. (vi) The treated area must be tested for water leakage/ seepage by flooding with water for 48 hrs. (vi) Application of membrane coating shall be got done by authorized applicator of manufacturer. (vii) 5 years of service guarantee to be provided. All above operations to be done in order as per direction on Engineer-in-Charge.
3000
1632000
544
18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc. complete .
175
147700
844
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6mm for diagonal braces
28.5
74214
2604
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.125x65x2.12 mm
50
1600
32
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :300x16 mm
50
8500
170
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm
50
3400
68
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :125 mm
50
1350
27
Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls.
150
20850
139
Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
1150
134550
117
Structural steel work using M.S. flats, angles, channels I-section, H- section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
300
20700
69
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
350
228200
652
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
Ridges plain (500 - 600mm).
65
20800
320
Gutter .(600 mm over all girth).
65
50765
781
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
120
6360
53
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase
50
4950
99
Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.110 mm diameter (minimum wall thickness 2.2mm)
180
42840
238
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
Coupler 110 mm (minimum wall thickness 2.2mm)
60
6120
102
Single tee with door 110x110x110 mm (minimum wall thickness 2.2mm)
60
10560
176
Bend 87.5° 110 mm bend (minimum wall thickness 2.2mm)
60
6720
112
Shoe (Plain) 110 mm Shoe (minimum wall thickness 2.2mm)
15
1485
99
Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of bombay nail of required length including making good the wall etc. complete.110 mm (minimum wall thickness 2.2mm)
60
6840
114
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below.
20
660
33
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
12.5
7225
578
Dismantling tile/Kota stone/Marble/Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm.
100
1700
17
Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.
15.6
13166
844
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
100
1300
13
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar.
15.91
7748
487
Brick work with well burnt chimney bricks in bulls patent trench kiln, crushing strength not less than 25kg /cm2 and water bsorption not more than 20% in superstructure above plith level and up to floor two level i/c curing etc complete.Cement Mortar 1:6 (1 cement : 6 sand).
18.5
97217
5255
12 mm cement plaster of mix : 1:6 (1 cement : 6 sand)
150
24000
160
Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete. Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height.
175
7875
45
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand).
225
40500
180
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of such as duro board, century or equivelant make. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
37.8
59119
1564
Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete :300x16 mm
40
15560
389
Providing and fixing ISI marked stainless steel door latches with screws etc. complete :250x20x6 mm
20
3460
173
Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete :
-
-
-
125 mm
20
1200
60
100 mm
20
1080
54
Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm
20
2960
148
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm
60
4020
67
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron)
175
56350
322
For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).Powder coated aluminium (minimum thickness of powder coating 50 micron)
225
77625
345
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) :With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)
35.9
27786
774
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading.
26.7
36579
1370
Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete.
30
2220
74
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :With 20mm nominal size graded stone aggregate. M 15 – Grade concrete
5.9
26378
4471
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone.Red sand stone
15.6
10015
642
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet, Sand cast iron SandS as per IS: 3989.
14
11550
825
Providing and fixing C.P. Brass grating of approved quality and make conforming to IS: specification.
22
1628
74
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. samples approved by Engineer-in-charge.
-
-
-
Granite fine grained dark crystal of other colours and various patterns
25.9
61020
2356
Cuddpah stone
30.6
39137
1279
Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete.
150
100500
670
Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete.
225
174600
776
Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
10
2320
232
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510 mm bowl depth 200 mm.
10
45830
4583
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe (only in residential & complaxes)40 mm dia
20
1960
98
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes.
150
35100
234
Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
20
9160
458
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
20
15560
778
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below.
20
660
33
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
25
14450
578
Dismantling tile/Kota stone/Marble/Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm.
120
2040
17
Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.
25
21100
844
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
150
1950
13
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar.
15.63
7611
487
Brick work with well burnt chimney bricks in bulls patent trench kiln, crushing strength not less than 25kg /cm2 and water bsorption not more than 20% in superstructure above plith level and up to floor two level i/c curing etc complete.Cement Mortar 1:6 (1 cement : 6 sand).
15.6
81978
5255
Extra for half brick masonry in superstructure, above floor II level for every floor or part thereof respective item.
50
550
11
Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of half brick masonry.
50
6350
127
12 mm cement plaster of mix : 1:6 (1 cement : 6 sand)
150
24000
160
Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete.
175
117250
670
Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete.
225
174600
776
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter
63
141750
2250
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet, Sand cast iron SandS as per IS: 3989.
20
16500
825
Providing and fixing C.P. Brass grating of approved quality and make conforming to IS: specification.100 mm dia.
20
1480
74
Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete :
-
-
-
300x16 mm
40
15560
389
250x16 mm
40
13040
326
Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete :
-
-
-
125 mm
40
2400
60
100 mm
40
2160
54
Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete :
-
-
-
250x10 mm
30
4440
148
200x10 mm
10
930
93
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
-
-
-
125x64x1.90 mm
90
6030
67
100X58X1.90 mm
30
1770
59
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.
20
43740
2187
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length15 mm nominal bore
30
4470
149
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe (only in residential & complaxes)40 mm dia
30
2940
98
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes.
170
39780
234
Providing and fixing C.P. brass bib cock of approved quality conforming to IS: 8931, 15 mm nominal bore.
30
13740
458
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore.
30
23340
778
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore
20
10320
516
Providing and fixing C.P. brass pillar cock approved quality and make conforming to IS: specification. 15 mm nominal bore 125 mm long foam flow.
30
24870
829
Providing and fixing C.P. brass basin mixer of approved quality and make conforming to IS:specification.15 mm nominal bore.
20
35380
1769
Providing and fixing C.P. brass wall mixer of approved quality and make conforming to IS: specification. 15 mm nominal bore.
20
65840
3292
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First Layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours.
b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with Polymer mixed slurry.
125
25875
207
Providing and fixing water closet squatting pan (Indian type W.C. Pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
5
14975
2995
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid.
20
92260
4613
Providing and fixing white vitreous china Anti germ fluoro-polymer coated single piece W.C. dual flushing capacity 3 and 6 litre of approved shape with 15mm quarter turn angular stop cock and pvc connection pipe i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete.Anti germ Fluoro-Polymer Coated Single Piece W.C. Pan Size 360 x 640 x 690 mm with solid poly propelyne made soft closing seat cover.(Premium Range)
15
230895
15393
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below.
12
396
33
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
4.6
2658
578
Dismantling tile/Kota stone/Marble/Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.
6.5
110
17
Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.
20
16880
844
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
100
1300
13
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar.
19.6
9545
487
Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete.
-
-
-
G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height.
25
1550
62
Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height.
120
5400
45
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand).
225
40500
180
Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately).
50
4050
81
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron)
350
112700
322
For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).Powder coated aluminium (minimum thickness of powder coating 50 micron)
375
129375
345
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) :With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm)
65
50310
774
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.With 12 mm mild steel U beading.
65
89050
1370
Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete.
50
3700
74
Brick work with well burnt chimney bricks in bulls patent trench kiln, crushing strength not less than 25kg /cm2 and water bsorption not more than 20% in superstructure above plith level and up to floor two level i/c curing etc complete.Cement Mortar 1:6 (1 cement : 6 sand).
11.2
58856
5255
12 mm cement plaster of mix : 1:6 (1 cement : 6 sand)
150
24000
160
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws:30 mm thick shutters with ISI marked stainless steel butt hinges of required size.Second class teak wood.
63
209349
3323
Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete :300x16 mm
50
19450
389
Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete :
-
-
-
125 mm
25
1500
60
100 mm
30
1620
54
Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete :250x10 mm
40
5920
148
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm
90
6030
67
Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete.
30
3090
103
Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality).Double strip (horizontal type).
16
368
23
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).
-
-
-
18 mm thick
25.6
32512
1270
25 mm thick
25.2
34851
1383
Providing and fixing sliding arrangement in racks/ cupboards/ cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)
20
280
14
Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete :
-
-
-
300x16 mm
10
3890
389
250x16 mm
10
3260
326
Providing and fixing ISI marked stainless steel door latches with screws etc. complete :
-
-
-
300x20x6 mm
10
2110
211
250x20x6 mm
10
1730
173
Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete :
-
-
-
125 mm
24
1440
60
100 mm
24
1296
54
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
-
-
-
125x64x1.90 mm
24
1608
67
100X58X1.90 mm
24
1416
59
Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality)
20
1240
62
Providing and laying Vitrified floor tiles Multi/Double Charged (Minimum top layer thickness 2.0 mm) Nano polished self design, in different sizes, with water absorption less than 0.05 % and conforming to I.S. 15622, of approved make in all colours and shade Ist quality premium in flooring laid on 20 mm thick cement mortar 1:4 (1 cement: 4 sand), including grouting the joint with white cement and matching pigments etc. complete.In light shade glossy/rustic/satin finished Size 600X600 mm thickness 9-10 mm
250
276000
1104
Providing and laying Vitrified floor tiles Multi/Double Charged (Minimum top layer thickness 2.0 mm) Nano polished self design, in different sizes, with water absorption less than 0.05 % and conforming to I.S. 15622, of approved make in all colours and shade Ist quality premium in skirting laid on 12 mm thick cement mortar 1:3 (1 cement: 3 sand), including grouting the joint with white cement and matching pigments etc. complete.In light shade glossy/rustic/satin finished Size 600X600 mm thickness 9-10 mm
90
98370
1093
Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
450
52650
117
Structural steel work using M.S. flats, angles, channels I-section, H- section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
180
12420
69
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
150
97800
652
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter .(600 mm over all girth).
30
23430
781
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
55
2915
53
Brick work with well burnt chimney bricks in bulls patent trench kiln, crushing strength not less than 25kg /cm2 and water bsorption not more than 20% in superstructure above plith level and up to floor two level i/c curing etc complete.Cement Mortar 1:6 (1 cement : 6 sand).
10
52550
5255
Supplying and filling in plinth with crusher stone dust/coarse sand under floors including, watering, ramming consolidating in layers not exceeding 20cm in depth and dressing complete. Note:- Maximum thickness of this layer shall be 20 cm.
6.4
4300
672
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, With 20mm nominal size graded stone aggregate. M 15 – Grade concrete
4.55
20343
4471
12 mm cement plaster of mix : 1:6 (1 cement : 6 sand)
100.8
16128
160
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
15000
105000
7
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work including cutting chases and making good the walls etc.
-
-
-
20 mm nominal outer dia Pipes.
190
44460
234
25 mm nominal outer dia Pipes.
90
25920
288
Providing and fixing CPVC gate valve with knob of approved quality. 25 mm nominal bore
20
8560
428
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore
20
8620
431
Providing and fixing G.I.Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :20 mm nominal bore.
30
7560
252
Providing and fixing PTMT bib cock of approved quality and colour 15mm nominal bore.122 mm long weighing not less than 99 gm
20
4160
208
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.20mm nominal bore. Weighing not less than 40gms.
10
650
65
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :With brass lever handle of approved quality.25 mm nominal bore
10
3410
341
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore
30
7410
247
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
120
7680
64
Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means). All kinds of soil
25
3225
129
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth levelWith 40mm nominal size graded stone aggregate. Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M 10) :
15.4
58643
3808
Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming consolidating in layers not exceeding 20cm in depth and dressing complete. Note: - Maximum thickness of this
layer shall be 20 cm.
15.4
10348
672
Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of stone dust, compacting and proper embedding/ laying of inter locking paver blocks into the bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including locking edges in 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer's specifications and direction of Engineer-inCharge.60 mm thick C.C. paver block of M-35 grade
120
66720
556
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
12.9
78651
6097
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-inCharge. (cost of post painting earth work & C.C. to be paid separately)
50
28700
574
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar.
6.5
3165
487
Brick work with well burnt chimney bricks in bulls patent trench kiln, crushing strength not less than 25kg /cm2 and water bsorption not more than 20% in superstructure above plith level and up to floor two level i/c curing etc complete.Cement Mortar 1:6 (1 cement : 6 sand).
6.5
34157
5255
Providing half brick masonary with well burnt chimney bricks in bull patent trench klin crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level Cement mortar 1:4 (1 cement : 4 sand)
25
15375
615
12 mm cement plaster of mix : 1:6 (1 cement : 6 sand)
120
19200
160
Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
200
23400
117
Structural steel work using M.S. flats, angles, channels I-section, H- section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
120
8280
69
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
225
146700
652
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Gutter .(600 mm over all girth).
35
27335
781
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
90
4770
53
Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead :Red/ white sand stone slabs 30 to 50 mm thick.
50
31550
631
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead.
100
1700
17
40 mm thick stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone/White sand stone) stone to be supplied by the department.
-
-
-
Rough chiseled dressed stone
50
8850
177
Fine dressed stone
50
10350
207
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
5500
27500
5
White washing with lime old work to give an even shade :two or more coats
5500
38500
7
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
31000
186000
6
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats).
31000
651000
21
Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentile oil, white paint,safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labour etc complete.
7750
403000
52
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.
-
-
-
With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre.
1150
32200
28
With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre.
725
17400
24
With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.
7750
186000
24
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work.
250
7000
28
Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface).
9500
826500
87
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work.
1875
65625
35
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements