Bhopal City Link Limited Tender

V2_2.6.1-All kinds of soil-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.

V2_4.1.4- Cement concrete grade M-10 (NominalMix) with 20 mm maximum size of stone aggregate

V2_4.1.1- Cement concrete grade M-20 (NominalMix) with 20 mm maximum size of stone aggregate

V2_5.3- Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement with Cement concrete grade M-20 (NominalMix with 20 mm maximum size of stone aggregate).

V2_5.20.6-Thermo-Mechanically Treated barsBrick work with mechanized autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 100 in superstructure above plinth level up to floor 2 level in.

V2_6.35.1- Cement mortar 1:4 (1 cement :4 coarse sand)

V2_13.2.3-1:6 (1 cement: 6 fine sand) ainting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

V2_13.62.1- Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

V2_12.50- Supply & installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm ±5% total coated thickness (TCT) thick Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 meter or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.