Public Works Department Tender
View complete overview of Lakshadweep PWD Tender
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date16 Jul 2024
Closing Date26 Jul 2024
Tender Amount₹ 71,96,14,208
Costs
EMD
₹ 81,96,142Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Govt Senior Secondary School Complex Phase I (primary School And
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UTL_2667_1Bid Award Id
ViewTender No
NIT No. 57/NIT/EE Kvt/2023-24Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.utl.gov.in/services.html
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Plan - ELE AND ELV TECHNICAL SPECIFICATIONS Kavaratti School
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
1061.73
-
-
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.
3162.81
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
740.04
-
-
Providing and filling in rubbles in foundation, in plinth and for plinth protection, filling, with quarry spalls covering and leveling the surface in layers of 20 cm thickness stone/metals or stone chips, including watering, ramming well and consolidating each layer using minimum 100mm cut size stones. (Ramping by manual or mechanical means)
2704.31
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
7156.96
-
-
Supplying chemical emulsion in sealed containers including delivery as specified : Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
3936.33
-
-
Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required
1746.9
-
-
PCC & RCC Works
-
-
-
Providing, supplying to site and laying cement mortar in 1:6 (1-Cement : 6-coarse sand) proportion.
303.19
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
1474
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. : All works upto plinth level : Concrete of M25 grade with minimum cement content of 330 kg /cum
2406.36
-
-
Centering and shuttering including strutting, propping etc. and removal of form of RCC works for Foundations, footings, bases of columns, etc. for mass concrete
2782.56
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20cm wide
971.39
-
-
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. : All works above plinth level upto floor V level: Concrete of M25 grade with minimum cement content of 330 kg /cum
3506
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
11671.35
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
505.77
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
9883.16
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
4519.22
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts ; Extra for shuttering in circular work (20% of respective centering and shuttering items)
2174.57
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, upto 5.5m (Plan area to be measured).
10778.62
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 5.5 m, upto 9.5m (Plan area to be measured).
3692.88
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases
118.92
-
-
Reinforcement and Steel Works
-
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding TMT Bar Fe 500D reinforcement in all diameter confirming to relevant I.S. standards as per ISS 2502 and IS 1786 including cost of binding with GI wires and placing in position complete all complete. (Brands: Tata, Jindal)
730481.37
-
-
Providing fusion bonded epoxy coating by mechanized & qualified process including blast cleaning, heating using Induction heater, electrostatically spraying the epoxy powder, complete fusion to give coating thickness 150 to 300 microns, gradual cooling without affecting the properties of steel, testing as per IS13620 / ASTMA775, flexibility/bend & holiday test, other applicable test for ASTM Standards.
730481.37
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. : In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
9859
-
-
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
80
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
14618.2
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. : On steel work
3005.52
-
-
Masonary Works
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
338.56
-
-
Providing and laying autoclaved aerated cement blocks masonry with 100mm/150mm/200mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
1334.36
-
-
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete : 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
571.87
-
-
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. : of thickness as prescribed by architect or engineer in charge
1287.41
-
-
Door Window and Façade Works
-
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of teak wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (type of wood as approved by architect or engineer in charge)
346.8
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of teak wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (type of wood as approved by architect or engineer in charge)
124
-
-
Providing wood work in frames of doors, windows, louvers clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). First class teak wood
66.5
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) : Teak wood : 35mm thick shutter (type of wood as approved by architect or engineer in charge)
1097
-
-
Providing and fixing woodwork 1st class teak wood louvers / battens/ handrail in doors, windows, louvers, shutters, and railing upto 100 x 100mm or as per architects approval
20.15
-
-
Providing, supplying and fixing: Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt for all wooden doors/window/louver frame work with wall
4296
-
-
Providing and fixing hardware for all toilet door of kitch make SS 316 handle Ø19X200mm(C/C), Dead Bolt (Back Set 50)(With Stainless Steel 160mm main and strike Plate)With Close Body 108 mm height -Saitn, Brass Pin Cylinder 60mm-Slot and Knob-Satn with SS 316 Euro Profle Escutcheons Round-Satn [BSEN 1634:1:2000] and Hinge Without Bearing 102X45X1.5mm-Saitn [BSEN 1935:2002]
63
-
-
Providing and fixing hardware for all Main door of SS 316 Pull Handle '85' ?40X10X450(C/C)X550mm(L)-Stain, Hinge Without Bearing 102X45X1.5mm-Saitn [BSEN 1935:2002] ,High Quality Aluminum Extruded Door Closer Over Head Hold Open up to 90kg-Silver, SS 316 Door Stop-Half Moon Ø45X25mm-Stain
141
-
-
Providing, supplying and fixing hardware for all Louvers of SS 316 Friction of 10", Hinge Without Bearing 102X45X1.5mm-Saitn [BSEN 1935:2002] , Brass Tower bolt of 3:
684
-
-
Providing and fixing hardware for all Window Shutter of SS 304 Friction of 10", Hinge Without Bearing 102X45X1.5mm-Saitn [BSEN 1935:2002] ,Aluminium hivik cremone short handle lock
684
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
693.6
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. : Teak wood 35mm thick (type of wood as approved by architect or engineer in charge)
785.61
-
-
Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5.0 mm thick instead of 4 mm thick.
785.61
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. : Granite stone slab colour black, Cherry/Ruby red : Area of slab over 0.50 sqm
134.12
-
-
Painting with oil type wood preservative of approved brand and manufacture : New Work (two or more coats)
7504.49
-
-
Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work
7504.49
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. : Fixed to openings /wooden frames with rawl plugs screws etc.
14565.12
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For Fixed Portion : Powder coated aluminium (minimum thickness of powder coating 50 micron)
158
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
145
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
36.8
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
107.6
-
-
Plaster, Paint and Ceiling Works
-
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
712.1
-
-
Providing, Supplying and Fixing GI 24 GAUGE CHICKEN MESH as per instruction given by either architects or engineer in charge
319.38
-
-
Providing, supplying and fixing: 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) as per instruction from architect or engineer incharge
12663.37
-
-
Providng, supplying and applying: 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) as per instruction from architect or engineer incharge
19088
-
-
Providing, supplying and fixing: 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) as per instruction from architect or engineer incharge
2482.57
-
-
Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. : Ordinary cement finish using ordinary cement
4453.65
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. : With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
15071.83
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. : Two Coats
19088
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
19088
-
-
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. : two Coats
1128.27
-
-
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
4449.91
-
-
Flooring Works
-
-
-
Providing and laying Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (finishing as specified by the architect)
3117.04
-
-
Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Dark shade pigment using ordinary cement of size as specified by architect or engineer in charge
863.09
-
-
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge) Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble of size as specified by architect or engineer in charge
1578.07
-
-
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size as specified by architect or engineer in charge
550
-
-
Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Light shade pigment using white cement of size as specified by architect or engineer in charge
4030.31
-
-
Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) : Medium shade pigment using 50% white cement and 50% ordinary cement of size as specified by architect or engineer in charge
1743.77
-
-
Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Medium shades pigment using 50% white cement and 50% ordinary cement of size as specified by architect or engineer in charge
461
-
-
Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Dark shade pigment using ordinary cement
201.03
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm
76.55
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
66
-
-
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. : Granite Work
58
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. : Granite stone of approved shade
42
-
-
Waterproofing and Roof Works
-
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction the Engineer in Charge but excluding the cost of painting with : : 12.5 mm thick tapered edge gypsum moisture resistant board
2690
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : 1) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. 2) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
375.76
-
-
Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area respectively, second and fourth courses of roofing felt type 3 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) , sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete.
6507
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 0% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-incharge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge. With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
10
-
-
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still gree. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar For the purpose of measurement the entire treated surface will be measured.
10
-
-
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).
6507
-
-
Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately).
780
-
-
Providing and fixing teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface. : 40mm thick (type of wood as approved by architect or engineer in charge)
500
-
-
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.
942
-
-
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
4166.95
-
-
Providing, supplying, lifting and laying: Cement mortar 1:6 (1 cement : 6 coarse sand) as per direction of architect or engineer in charge
325.35
-
-
POINT WIRING
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C
1013
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
9400
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
3300
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
3300
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as
required. 2 Pair
150
-
-
4 Pair
100
-
-
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
300
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20MM
1100
-
-
25 mm
10500
-
-
32 mm
55
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 150 mm X 150 mm X 60 mm deep
2
-
-
200 mm X 250 mm X 75 mm deep
12
-
-
250 mm X 300 mm X 100 mm deep
4
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet
111
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet
8
-
-
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
435
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
40
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)
50
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
442
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
306
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
12450
-
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C
802
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
164
-
-
CABLES AND ACCESSORIES
-
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X 50 mm depth X 1.6 mm thickness
600
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
325
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
5
-
-
450 mm width X 50 mm depth X 2.0 mm thickness
5
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X 50 mm depth X 1.6 mm thickness
48
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
12
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X 50 mm depth X 1.6 mm thickness
18
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
4
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness
9
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
2
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Reducer" (galvanisation not less than 50 microns) with perforation not more than17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness
6
-
-
150 mm width X 50 mm depth X 1.6 mm thickness
2
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/DWC/HDPE pipe as required. Upto 35 sq. mm
300
-
-
Above 35 sq. mm and upto 95 sq. mm
100
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
350
-
-
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
5
-
-
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
4
-
-
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (B) 3 core 4 Sq. mm
75
-
-
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)
100
-
-
((B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)
100
-
-
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (b) 4 core 6 Sq. Mm
200
-
-
(c) 4 core 10 Sq. mm
500
-
-
(d) 4 core 16 Sq. mm
200
-
-
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. 4 core 6.0 Sq.mm
350
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 35 sq. mm (32mm)
2
-
-
3½ X 50 sq. mm (35mm)
2
-
-
4 X 10 sq. mm (25mm)
20
-
-
4 X 16 sq. mm (28mm)
4
-
-
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 core 6.0 Sq.mm
16
-
-
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
400
-
-
90 mm dia (OD-90 mm & ID-76 mm nominal)
400
-
-
SWITCHGEAR, PANEL & ACCESSORIES
-
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door
30
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
548
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 A
91
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 A
40
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A
10
-
-
Providing and fixing M.V. danger notice plate of 200 mm X 150
mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
4
-
-
For 8 way, Double door SPN MCBDB
3
-
-
SITC of 12-Way VTPN DB, IP43, IK09, metal door. Double door with arrangement for FPMCCB, TPMCBs/FPMCBs. Make: Havell's, Legrand, Schneider, ABB.
3
-
-
SITC of 63A FP MCCB.
3
-
-
SITC of Indoor type Floor Panel-1 (Secondary Building) as per above specifications. Incomer : 125A, FP MCCB. Busbar: 125A TPN, 415V,3-Phase 15KA Al. RYB, On, Off, Trip Indicating Lamp-6 NOS with VSS & Voltmer. Control Fuse - 3 NOS. MFM - 1 NO. CT 125/5A 3 NOS (for Measuring Current) with ASS & Ammeter. Outgoings : 12nos. 40A FPMCB, 1no. 63A FP MCB, 2nos. 25A FPMCB, 2nos. 25A DPMCB. All MCCBs must be microprocessor based. NOTE: Panel design might vary as per final working. Contractor must follow the SLD before execution. Make: ABB, Scheneider, L&T, Havell's, Siemens
1
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/ coke and salt as required.
16
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
120
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
200
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
1400
-
-
ILLUMINATION & ACCESSORIES
-
-
-
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
435
-
-
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. As required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
435
-
-
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
466
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 510 mm sweep
32
-
-
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
32
-
-
SITC of IP65, IK07, weather proof & corrosion resistant 12W LED Wall Down Light type fixture with following specifications. Square/Cylindrical Shape, open surface, medim wide beam angle with symmetrical distribution, 3000k. Die-cast aluminium housing. Stainless steel fasteners in grade 316. Durable silicone rubber gasket. High efficiency optical reflector. Clear toughened glass. Single cable entry. Housing is treated with a chemical chromatised protection before powder coating, ensuring high corrosion resistance. Fixture colour must be as per consultant/architect's approval. Make: Ligman, Neri, K-lite, Uniled. Contractor must submit the sample to the consultant/ architect before execution. Fixture warranty must be 3 years minimum.
67
-
-
SITC of IP65, outdoor, open surface 18W round cylindrical down light type fixture with all required accessories. 4000K.Luminaire made of die cast aluminium, aluminium & SS fasteners. Clear tempered glass. Silicone gasket. Hybrid optics with lens & reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Cast aluminium plate for surface mounting onto the ceiling. Surface mounting on ceiling using hardware after connecting to the power supply. Cable entries for through-wiring of mains supply cable. Integral constant current power supply. CRI ( Ra) : ≥80 ( 90 CRI - On Request ). Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Make: Ligman, Neri, K-lite, Uniled, Abby. Contractor must submit the sample to the consultant/architect or engineer incharge before execution. Fixture warranty must be 3 years minimum.
48
-
-
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name. 120 to 300 V,Power Factor more than 0.9, THD 10 %, CCT 4000 K to 6500K, Uniformity ratio 0.7,
Luminaire efficacy 85 lumens/watt , LED driver efficiency 85 %.
CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). Tube Light . 22/28 Watt LED Batten with integral/ non-integral driver, Surge - 4KV,IP-20, 4 feet. Cat-III
855
-
-
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name. 120 to 300 V,Power Factor more than 0.9, THD 10 %, CCT 4000 K to 6500K, Uniformity ratio 0.7,
Luminaire efficacy 85 lumens/watt , LED driver efficiency 85 %.
CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). Tube Light . 12-15 Watt LED Batten with integral/ non-integral driver, Surge - 4KV,IP-20, 2 feet. Cat-III
8
-
-
(C) Square/ Circular, Surface/Recessed Mounted Downlight with provision for spring loaded mounting clips complete. (b) 10-15 watts, Surge-4 KV. Cat-III - as per description 14.01
118
-
-
(c) 20-24 watts, Surge-4 KV- as per description 14.01©
384
-
-
Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 1Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 V,Power Factor more than 0.95, THD 10 %, CCT 5000 K to 5700K, Uniformity ratio 0.45, Luminaire efficacy 85 lumens/watt . LED driver efficiency 85 %. CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make LED used for luminaire. ( Each fittings required LM-79 & LM-80 certificates). (B) Flood Light (IP-65), Surge -4KV. (d) above 100 to 120 watts. Cat-III
10
-
-
ELV WORK- FAS. CCTV, TELEPHONE & DATA NETWORKING
-
-
-
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
149
-
-
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required
14
-
-
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as
required.
14
-
-
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 4 Zone
4
-
-
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring &
LSZH outer sheath complete as required.
1650
-
-
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler
etc. as required.
1650
-
-
ABC Powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket etc. complete, confirming to IS:15683 Make: Cease Fire or equivalent
14
-
-
CO2 type fire extinguisher of 4.5 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket etc. complete, confirming to IS:15683. Make: Cease Fire or equivalent
14
-
-
Supply, Installation, Testing & Commissioning of IP Network IR Dome Camera, 1/2.8" CMOS, 2 MP, Min. Illumination required 0.05lux F1.4 color, 0Lux F1.4(IR on), 120dB True WDR, Min. Pixels 1920 × 1080, min. dual stream, 2.7–12 mm motorized focus & zoom lens, BLC, HLC, 3DNR, Privacy Mask, IR LEDs Smart IR with upto 30m IR distance, 128GB SD card support, H.265, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 66, IK10 rated vandal resisntant, Having Operating temp range : –30°C to 60° C. ONVIF Profile, cyber secured, UL, CE, FCC & RoHS certified. Approved Makes: Bosch, Axis, Honeywell, Avigilon
72
-
-
Supply, Installation, Testing & Commissioning of IP Network IR Bullet Camera, 1/2.8" CMOS, 2 MP, Min. Illumination required 0.05lux F1.4 color, 0Lux F1.4(IR on), 120dB True WDR, Min. Pixels 1920 × 1080, min. dual stream, 2.7–12 mm motorized focus & zoom lens, BLC, HLC, 3DNR, Privacy Mask, IR LEDs Smart IR with upto 60m IR distance, 128GB SD card support, H.265, H.264 High Profile and MJPEG, PoE Class 3 and 12V DC, IP 66, Metal Body, Having Operating temp range : –30°C to 60° C. ONVIF Profile, cyber secured, UL, CE, FCC & RoHS certified. Approved Makes: Bosch, Axis, Honeywell, Avigilon
24
-
-
Supply, Installation, Testing and Commissioning of 24 Channel NVR with 4 SATA, with 1080p Realtime Live View H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback Max 320 Mbps incoming bandwidth support 4 SATA HDDs up to 32TB, Supports fisheye videode-warping in local and web user interface,Supports visual or auditory notifications(a flashing light, bell,or siren) ONVIF compliant, UL, CE, FCC and & RoHS compliant. Approved Makes: Bosch, Axis, Honeywell, Avigilon
2
-
-
Supply, Installation, Testing and Commissioning of 32 Channel NVR with 8 SATA, with 1080p Realtime Live View H.265/H.264 MJPEG dual codec decoding Up to 12 MP resolution preview & playback Max 320 Mbps incoming bandwidth support 8 SATA HDDs up to 64TB, Supports fisheye videode-warping in local and web user interface,Supports visual or auditory notifications(a flashing light, bell,or siren) ONVIF compliant, UL, CE, FCC and & RoHS compliant. Approved Makes: Bosch, Axis, Honeywell, Avigilon
2
-
-
Supply, Installation, Testing and Commissioning of 12 TB HDD for Storage Approved Makes: Segate / WD
4
-
-
Supply, Installation, Testing And Commissioning of Layer 2 Managed Gigabit POE switch with 24 # 10/100/1000BaseT ports and 2 # Gigabit Combo ports(RJ45/SFP), 2 # Gigabit SFP Port. Approved Make: HP/ Cisco
4
-
-
Supply, Installation, Testing and Commissioning of Single UTP CAT6 RJ-45 I/O of specified make inclusive of termination of CAT6 cable at each IO including Singlex Face Plate for mounting IO with required back box. Approved Make: Polycab/ Tyco/ Molex.
96
-
-
Supply, Installation, Testing and Commissioning of 6U Wall Mounting Rack for Floor Distribution. Approved Make: Tata/APW/Valrack
4
-
-
Supply, Installation, Testing and Commissioning of 6Core Fiber Cable for Building Connectivity. Approved Make: Polycab/Tyco/Molex/CIS
400
-
-
Supply, Installation, Testing and Commissioning of Duplex LC To LC MM Fiber Patch Cord 3 mtr. Approved Make: Polycab/Tyco/Molex/CIS
4
-
-
Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet steel enclosure complete as required. 4 pair Krone type tag block
4
-
-
Supply, Installation, Testing and Commissioning of Caller ID Telephone Instruments
16
-
-
Telephone System:Supply, Installation, testing and commissioning of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots, 1 PRI, 104 nos of Extensions, 4 nos of IP channels, CPU and Power supply hot swappable (Redundancy), 8 port digital for KTS, 4-Port builtin GSM required (Sim Card), built in voice recording, Long distance capability required, outlook integration required for all users. Approved Make: NEC/ NEOS Infinity/ Avaya/ Panasonic
4
-
-
Supply, Installation, Testing and Commissioning of Director phone with KTS. Approved Make: Neos/Beetel/Panasonic/NEC
2
-
-
EQUIPMENTS & OTHER SERVICES
-
-
-
Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter & sealed maintenance free batteries. The charger having operating capacity for input 160-270V AC & inverter having output 23OV,5O Hz Ac with 0.8 load power factor with battery, over under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following capacity & with Following size of batteries. (D) 5 KVA (i)With 11 Nos. of 12 V 55 Ah SMF batteries
6
-
-
Supply, Installation, Testing & Commissioning of Solar Roof Top Panels including all type of connections and equipments. Including all type of fabrication work, inverters, AC/DC distribution boards, cables, earthing. Cables on solar panels must be tied with the aluminium cable tie. Cement foundation of the fabrication must be in round shape and covered in pvc pipe of required size. Contractor must need to submit the layout of the solar roof top panel installation and approve the sample work with the architect/consultant/authorized government official. 5 years maintenance warranty shall be in the contractor's scope for all the equipments used and the installation work. Make: Adani make solar panel. Government Approved make solar inverter.
140
-
-
SITC of Lift suitable for min. 6/8 Passengers upto 10 Mtr. height with following specifications. (1200mm x 1400mm) Make: Mitsubishi, Schindeler, Kone. Load- 408kg/ 6 passengers.Speed- 0.63 mps. Direction- All at the same side. Rise Mts.- 20 Mts. Overhead- 4.8Mts. Power supply- 400 volts, 3-Phase, 50 Hz AC. Light Supply: 230 Volts, 50 Hz Single Phase. Machine- Geared placed above the hoistway in machine room. Control- Microprocessor based controller with VVVF. Operation- Down Collective ,Simplex. Platform Size (W * D ) -mm & Hoistway Require ( W * D ) -mm Car Enclosure- As per Standard. Flooring- PVC. False Ceiling- Standard. Car Door Type- Protected by S.S. Closed Door with Center Opening. Clear. Entrance Size ( W * H ) -mm- Standard. Landing Door- Same sa Lift doors. Door Frame- Standard. Door Operation- Automatic. Std. Fixtures/Signals: Touch Panel with Updown arrow, Auto/Manual Fan On/Off, Battery Operated Alarm Bell + Emergency Light, Automatic Rescue Device.
4
-
-
AIRCONDITIONING
-
-
-
Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .
48
-
-
Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. 2 TR
16
-
-
Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft / hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
200
-
-
SANITARY WARE AND ACCESSORIES
-
-
-
Providing and fixing wsh down water closet with flushing cistern with bracket frame and all necessary fittings and accessories. (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour including all accessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.
80
-
-
Providing and fixing under counter washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour including all required accessories and connections like bottle trap, waste etc. Make: Jaquar, Kohler, Grohe, Cera high end series.
82
-
-
Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.
72
-
-
Providing and fixing stainless steel toilet paper holder. Make: Jaquar, Kohler, Grohe, Cera high end series.
80
-
-
Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap including all required accessories and connections. (i) 15mm dia. Make: Jaquar, Kohler, Grohe, Cera high end series.
25
-
-
Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. including all required accessories and connections. (i) 15mm dia. Make: Jaquar, Kohler, Grohe, Cera high end series.
68
-
-
Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm. including all required accessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.
46
-
-
Providing and fixing Kitchen stainless steel sink with C.I/M.S./SS brackets or frame painted white or as per approved by the architect including cutting holes in walls and making good the same including all fittings. (i) 625mm x 445mm x 200mm size. Make: Jaquar, Nirali, Carysil high end series.
12
-
-
Providing, fixing and testing 150 mm2 two piece stainless steel jali with cockroach trap over nanhi/multifloor trap/floor trap fixing with cement in proper position etc. complete as directed.
107
-
-
Providing and fixing screw down 2-way bib cock of following size. Brass chromium plated 2-way bib cock (i) 15 mm.(Make: Hind ware/cera/jaquar/Grohe) including health faucet, 1.2 mtr long pvc tube and walk hook with all required accessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.
80
-
-
Supply, installation, testing and commissioning of auto closing concealed push button for urinal flushing with all required accessories and fitting. Make: Jaquar, Kohler, Grohe, Cera high end series.
32
-
-
Providing and fixing Angle tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia. (Make: Hind ware/cera/jaquar/Grohe) including all required accessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.
79
-
-
Providing and fixing 450mm Long Braided Hose pipe with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Wash Basin, Kitchen Sink etc.) of approved make and conforming to Manufacturers Standards. Make: Jaquar, Kohler, Grohe, Cera high end series.
79
-
-
Supply, storing, installation and testing twin coat hook, fixed to wall / door with concealed CP screws etc. complete. Make: Jaquar, Kohler, Grohe, Hindware, Cera high end series.
80
-
-
Providing and fixing of grab bars 300 mm Stainless steel in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted in all manners and satisfied to of EIC.complete. Make: Jaquar, Kohler, Grohe, Hindware, Cera high end series.
8
-
-
Providing and fixing of grab bars Vertical Swing 18-8 S, type-304, 18-gauge (1mm) stainless steel tubing with satin-finish. 1–1/4 (25mm) outside diameter wall mounted in physically disabled toilet including all necessary fitting, SS Screws & Accessories etc.Complted in all manners and satisfied to of EIC.complete. Make: Jaquar, Kohler, Grohe, Hindware, Cera high end series.
8
-
-
Providing and Fixing of Stainless Steel Hand Dryer with all required connections and following specifications. Weld-free cover fixed to the base with two safety screws and lock withspecial speedflow key. Aluminium base. Includes silent-blocks to damp mechanical vibrations. Fire resistant plastic UL 94-V0 fan scroll. High-speed motor with safety thermal cut-off.The motor revolutions canbe adjusted manually by the potentiometer. • Aluminium centrifugal double asymmetrical inlet fan wheel. Disconnects automatically after 60 seconds of continuous use. Electronic infrared detection sensor. Adjustable detection by potentiometer(5- 25 cm). Ultra-flat: 10 cm deep (complies with ADA regulations). complete. Make: Jaquar, Kohler, Grohe, Hindware, Cera high end series.
24
-
-
Supply and installation of Stainless Steel Handwash Liquid Dispenser with all required fittings and accessories.
24
-
-
Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.
4
-
-
Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, pre filter housing with 'O' ring pre sediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee. [B] 25 Ltr / Hr with 30 Ltr. S.S. Pressure Tank
4
-
-
WATER SUPPLY
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
For Cold Water Lines ( Domestic & Hot) (Inside Toilet)(Make:Astral,Ashirwad,Finolex) 15 mm nominal outer dia Pipes ( SDR 11 )
190
-
-
20 mm nominal outer dia Pipes ( SDR 11 )
130
-
-
25 mm nominal outer dia Pipes ( SDR 11 )
361
-
-
32 mm nominal outer dia Pipes ( SDR 11 )
70
-
-
40 mm nominal outer dia Pipes ( SDR 11 )
55
-
-
40 mm nominal outer dia Pipes ( SDR 11 )
40
-
-
50 mm nominal outer dia Pipes ( SDR 11 )
47
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes
5
-
-
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings . Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(Ac Drain) Make: Astral, Supreme, Finolex, Prince
100
-
-
Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve single/double piece designed of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB) size: 25mm diameter. Make:ZOLOTO/VTC/SANT
16
-
-
Providing, fixing, jointing and testing, heavy quality cast steel / Brass ball valve single/double piece designed of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB) size: 32mm diameter (Make:ZOLOTO/VTC/SANT)
8
-
-
INTERNAL DRAINAGE
-
-
-
Providing, laying and jointing in true line and level 40mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)
85
-
-
Providing, laying and jointing in true line and level 50mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)
100
-
-
Providing, laying and jointing in true line and level 75mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)
240
-
-
Providing, laying and jointing in true line and level 110mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm height at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)
615
-
-
Providing, fixing and testing PVC Deep seal P-Trap of 110 X 110 mm dia diameter, with necessary distance piece of 75mm dia pipe and 150 x 150mm heavy duty PVC three piece grating, making necessary holes and cutting in Slab/Walls, etc complete as per engineer in charge. (Make: prince/ supreme / astral / finolex)
99
-
-
Providing, fixing and testing PVC Height Riser with wings of 110 X 50 X 40 mm dia diameter, with necessary suported accessories, making necessary holes and cutting in Slab/Walls, etc complete as per engineer in charge. (Make: prince/ supreme / astral / finolex)
90
-
-
EXTERNAL DRAINAGE / STORM WATER DISPOSAL
-
-
-
Providing & Fixing of factory made Precast Chamber, having size (in to in) of 800 mm (L) X 800 mm (B) X Height : 800 mm T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & use of Fe 500 D reinforcement. The contractor shall prepare & provide the base using PCC/Foundation concrete as a levelling course as recommended by the consultant. The precast Chamber unit should consist of special in built insert of suitable load carrying capacity at appropriate location for fixing De-shackle (Hanging hole) for safe & fast mechanical installation.Cut out holes hole should be provided for utility connection as per the requirement.The Precast cover having size 944 x 944 X 120 mm thick , designed for T-25 load carrying capacity - 10 T Axle Load - 5 T Wheel Load, confirming to IS requirements, having High Performance Self Compacting Concrete of M-40 cylinder strength/M-50 cube strength & use of Fe 500D reinforcement. The lid may have in build specially designed lifting inserts of appropriate load carrying capacity & fixed at specific location to avoid the tilting of the lid for safe & fast installation.In no case the casting shall be allowed to be prepared at site. It should be casted in the stringent atmospheric & pre-defined condition, as per approved QAP as by Engineer In charge, including making cut-outs, core cutting for ducts. Brand: Fuji Silvertech, and equivalent. Make: Fuji Silvertech or equivalent
8
-
-
RAIN WATER INTERNAL/EXTERNAL DRAINAGE
-
-
-
Providing, laying and jointing in true line and level 110 mm diameter U.P.V.C (Type A) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm height at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Make: Astral, Supreme, Finolex, Prince
610
-
-
Providing, Fixing, Installation and Testing of 100mm rainwater outlets 2HP-2W/3HP-2W/ 4HP-2W* are to be ACO Building Drainage HP Two-Way screw outlets with locked flat grating supplied by ACO Building Drainage SG17 5TE. All components to be manufactured from grade LM6 aluminium alloy to BS 1490/ gun-metal to BS EN 1982. complete as per site engineer in charge. Make: Astral, Supreme, Finolex, Prince
8
-
-
Providing and fixing, PVC cowl, 110mm diameter on PVC ventilating pipes and verticals for soil and waste Pipes at top level / terrace level, as specified and required, etc. complete. Make: Astral, Supreme, Finolex, Prince
72
-
-
INTERNAL PIPING & ACCESSORIES
-
-
-
Providing, laying, testing & commissioning of 100 mm diameter 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required
100
-
-
Providing and fixing 100 mm dia cast iron butterfly valve complete with epoxy coated disc, carbon steel shaft and lever actuator including flanges and nut bolts etc complete as per I.S 13095 of PN16 rating. for isolation
8
-
-
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
16
-
-
Supplying and fixing first-aid 30 meter long Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
8
-
-
Supplying and fixing first-aid 40 meter long Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
8
-
-
Providing and fixing of weather proof hose cabinet fabricated from 16g MS sheet with full glass door and locking arrangement, suitable to accommodate 2 nos. 15m long 63 mm dia hose, and one no. branch pipe with nozzle. The cabinet shall be painted with two coats of 'Fire red' enamel paint over two coats of Zinc Cromate primer including "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx. 0.75m x 0.6m x 0.25m).
8
-
-
Supplying and fixing Gun Metal 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
16
-
-
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required as per approved make.
16
-
-
Supplying and fixing of 2-way fire brigade connection to static tank (Draw out connection) of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
8
-
-
Providing & fixing Fire pump ON/OFF switch including all related fitting accessories as per engineer in charge.
16
-
-
ABC Powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket etc. complete, confirming to IS:15683
16
-
-
EXTERNAL PIPING & ACCESSORIES
-
-
-
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe
8
-
-
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way-100 mm dia M.S. Pipe
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements