Public Works Department Tender

a)beyound 60cm and upto 120cm in girth.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge

Demolishing cement concrete manually/ by mechanical means includingstacking of steel bars and disposal of unserviceble material with in 50metre lead as per direction of disposal of material within 50 metres lead as per direction of Engineer - in - charge.1:4:8 or leaner mix

Earth work excavation in foundation trenches or drains not exceeding 1.5m in width or 10 sq.m on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead up to 50 mtr and lift up to 1.5 metres

Providing and laying cement concrete 1:4:8 (1 cement 4 M-sand 8 graded stone aggregate 40mm nominal size) excluding the cost of centring and shuttering and reinforcement for foundation and plinth

Reinforced cement concrete work 1:1.5:3 (1 cement 1.5 M-sand 3 granite chipps 20mm nominal size excluding cost of centring,shuttering and reinforcement .All work up to plith level .foundation footings bases of coloumn etc and mass concrete

Reinforced cement concrete work 1:1.5:3 (1 cement 1.5 M-sand 3 granite chipps 20mm nominal size excluding cost of centring,shuttering and reinforcement .

Centering and shuttering including strutting propping bressumerse and cantilivers up to floor five level etc and removal of form work

foundation footing base of coloum etc and mass concrete

Lintels, beams,girders, bressumers and cantilevers up to floor five level

Indipendent coloum, piller post and struct up to floor two level

Suspended floors, roofs, landings, shelves and their supports balconies, lintels beasms griders, bressumerse and cantilivers up to floor five level

Cold twisted steel reinforcement for R.C.C work including bending, binding and placing in position complete.

Cement concrete block (machine moulded) masonry in Super structure above plinth level in CM 1:6 with blocks of size 40cmx20cmx15cm.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) .For fixed portions:powder coated aluminium(minimum thickness of power coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutter of door ,Windows &Ventilator including providing and fixing hinges/ pivots and making provision and fixing of fitting wherever reqired including the cost of EPDM rubber/neoprene gasket requied (Fitting shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door,window,ventilator shutters and partitions etc. with EPDM rubber/neopane gasket etc.complete as per the architectural drawing and the directions of Engineer in charge (Cost of aluminium snap beading shall be paid in basic item)With float glass panes of 5.50 mm thickness

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graced wood particle boarrd confirming to IS: 12823 grade 1 type 11 panelling fixed in Aluminium doors,windows shutters and partion frames with C.P.brass/stainless steel screws etc.complete asper archituectural drwing and directions of engineer - in charge.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With brass cover plate minimun 1.25mm thickness.

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.Anodized (AC 15 ) aluminium tubular handle bar

Providing and fixing bright finished brass 100mm mortice latch and lock with 6 leveres and a pair of lever handle wth necessary screws etc complete. a) 250 mm x 16mm

Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium

Providing and fixing anodised Aluminium tower bolt (barral type) anodised transparent or dyed to required colour and shade with bolts , nuts and screws etc complete.

Providing and fixing bright finished Aluminium handles with screws etc complete. 125 mm

12mm cement plaster 1:6 (1 cement 6 M- sand)

Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing wall with Delux surface paint of interior using primer of approved brand and manufacture of required shade on new work (three or more coats) to give an even shade

Cement concret flooring 1:2:4 (1cement, 2 M-sand, 4 granite chips) finished wih a floating coat of neat cement in cluding cement slurry, rounding of edges and strips etc but excluding the cost of nosing the steps etc complete, 40 mm thick

Structural steel work riveted, bolted or welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved.ISA sections/MS plates as per design/directions of the engineer in charge.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. .80 mm thick with zinc coating not less than 275 gm/m²

Providing Non -asbestos high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required

Painting steel work with Deluxe Multi surface paint to give an even shade. Two or more coats applied on @ 0.90ltr/10 sqm) over under coat of primer applied @ 0.80 ltr/10 sqm of approved and manufacture.

Providing and fixing GI 10mm thick checquered plate for trench covering including cutting shaping and fixing etc. as directed by the engineer in charge

Providing and fixing of wind operated turbo air ventilators with 1mm GI sheet base fixed with GI L/J hooks and washer suitably etc complete as directed by the engineer in charge

Providing and fixing SS hand grabbers for physically challenged in bathrooms/toilets : 1feet long including cutting and making good the walls as directed by the engineer in charge