Military Engineer Services Tender

Total amount of Sch 'A' part-III (Summer Appliances)

Total amount of Sch 'A' part-IV (Lightning Protection)

Total amount of Sch 'A' part-V (Road/ Path)

Total amount of Sch 'A' part-VI (External Electric Supply)

Sch 'A' Part- VII (Miscellaneous) (Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.)

Soil investigation at the proposed construction site at location of Radar Tower (30m height) by drilling 100mm dia bore hole upto a depth of 10m below the ground level or 1m into the hard rock strata (whichever is earlier) in any type of strata complete all as specified and as directed by Engineer-in-charge.

Note for item No. 09 above : Soil investigation at the proposed site shall be executed and test report shall be submitted to GE initially i.e, before commencement of the original building work. Rate quoted shall be deemed to include the following :- (a) Mobilization of tools, plants, equipments and manpower required for carrying out soil investigation, setting of boring/ drilling as required and later demobilization of plants and equipments after completion of work (b) Collecting undisturbed and disturbed samples and performing STP test at every 1.5m interval. (c) Conveyance of samples collected at site to the testing lab as requird for the purpose of testing and analysis (d) Lab testing including triaxial test, direct shear test, liquid limit, plastic limit, plasticity index, grain size, specific gravity, ground water table, soil classification, bore logs and bore hole chart, permissible settlement, unconsolidated test on undisturbed sample, crushing strength of hard rock samples recovered, unconsolidated triaxial shear test etc. (e) Estimation of SBC of soil (f) Submitting photographic record during the process (g) Submitting test report in triplicate duly vetted along with detailed recommendation about type of foundation required.

SUMMER APPLIANCES : Supply and intsall Split type Air Conditioner electric driven, single phase 230 V,50 Hz of capacity of 2.0 TR BEE 5 star rating and testing complete all as directed by Engineer in charge Make : Voltas 245VZZV its equivalent in LG/Blue star/Hitachi

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5.0 KVA . Make : V-guard or equivalent

EXTERNAL ELECTRIC SUPPLY : Supply and fix double compression copper stain less steel gland for fixing armoured cable in panel of size 4 core 16 sq mm size

S&F cable path indicator for LT cable made out of cast iron plate of 100mm dia, 6 mm thick engraved with "LT 1100 volts" welded to MS angle 50x50x6mm, 75cm long embedded in PCC block (1:3:6) type C-2 of size 30x30x30cm including painting with two coats of blue colour synthetic enamel paint over one coat of red oxide primer and necessary earth work complete all as specified and as directed

Supply, installation, tesing and commissioning factory made outdoor/floor mounted compartmetalised thermoplastic polycarbonate cubical panel board outdoor type, IP-65 protection (CPRI test mandatory), conforming to IS-8623 totally enclosed with necessory ventilation, weather, dust and vermin proof (also to confirm IP-65 standard), front and rear opening and locking arrangement and duly powder coated with two coats of synthetic enamelled paint of approved colour over a coat of red oxide primer over outside and inside complete the panel board, 433 V, 3 phase, 4 wire 50 Hz having copper bus bar of 4 pole, minimum100 Amps capacity duly insulated with coloured R,Y,B&B sleeves,made of high conductivity 99.9% pure electrolytic copper of ETP grade including suitable copper earth strips conforming to IS and all as specified with supply and fixing the following :- (a) Provision of Voltmeter (0-450 Volt) , Ammeter Direct (0-30 A), LED indicator lamps for R Y B, selector switch, and frequency meter. (b) MCCB 4 pole 32 Amps -1 No. (Incomming) Make L&T cat No.CM97754OOOO (c) MCB SP 10-32 A, 10 kA - 8 nos (outgoing) Make L&T Cat No.BB20100B

S&F LED Aviation Obstructing Lighting comprising of aluminium housing with polycarbonate enclosure 302 LED including of all fittings and fixtures such as mast for mounting fittings, cable junction box, cable from equipment room complete all as specified and directed by Engr-in-Charge Make : PhilipsCat No. XGP 400 l x LED K2 / RD - 48V or its equivalent in CG / Wipro

M&L for installation plastic adaptable trunking cable trunks covers (colours of the ducting matching with as per existing wall surface ) fabricated by made up of heavy duty PVC non corrosive acrylic sheets 3mm thick, box type machine /heat bend (dust and water proof) each of size 1.0 m ( long ) 0.30 m (wide) and 0.05 m (height) planks trunking with two equal compartments on support frame which can be clipped on flat RCC surface comprising of the following acessories such as end cap, changeable internal angle, changeable external angle, changeable flat angles, raised junction cover and body joints, flat junction and separation partitions fixed on suitable size of clamps made up of PVC with appropriate size of screw and nut bolts for securing the cables for easy opening and closing the cable tunks covers on the RCC antenna structure and equipment room all as specified and directed by Engr-in charge.