WAPCOS Limited Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 79,43,500Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_WAPCO_184550_1Bid Award Id
ViewTender No
WAP/INFS4/LAD/SPOR/23-24/01-4tTender Authority
WAPCOS Limited ViewPurchaser Address
-Website
http://http://www.wapcos.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
All kinds of soil.
7741.99
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
... More
All kinds of soil.
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
291.78
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
2123.72
-
-
... More
Disposal of excavated excess earth away from the site including conveyance of materials up to an average lead of 5KM away from the site, and correspondiong required lift, loading, unloading etc complete as directed by the Engineer-in-charge. (The quantity is net quantity of capacity of truck after deduction of 20% for looseness)(considering the maximum disposal location at 5 KM distance)(By mechanical transport including loading, unloading and stacking. (Lead upto 5KM away from the site))
5633.13
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
... More
All kinds of soil:0 to 1.5 m
3158.88
-
-
... More
All kinds of soil:1.5 to 3 m
1015.93
-
-
... More
All kinds of soil:3 to 4.5 m
45.73
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
13.62
-
-
... More
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (in all kinds of soil)
2325.67
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified
-
-
-
... More
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
978.7
-
-
... More
Anti termite treatment
-
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Along the external wall below concrete or masonry apron using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
192.42
-
-
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
1720.42
-
-
... More
CONCRETE WORKS
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
0.5
-
-
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
244.16
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
0.5
-
-
... More
1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
0.8
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :
-
-
-
... More
Foundations, footings, bases for columns
113.49
-
-
... More
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).
38.71
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
10
-
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
38.71
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
7.89
-
-
... More
REINFORCED CEMENT CONCRETE WORK
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete.
235.2
-
-
... More
Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.
2206
-
-
... More
Suspended floors, roofs, landings, balconies and access platform.
1559.68
-
-
... More
Shelves (Cast in situ)
2.84
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
875.67
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
1212.83
-
-
... More
Arches, domes, vaults up to 6 m span
10
-
-
... More
Stairs, (excluding landings) except spiral-staircases.
162.53
-
-
... More
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like
11.62
-
-
... More
Edges of slabs and breaks in floors and walls
-
-
-
... More
Under 20 cm wide
610.43
-
-
... More
Weather shade, Chajjas, corbels etc., including edges.
11.44
-
-
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additionalheight of 1 metre or part thereof (Plan area to be measured).
-
-
-
... More
Suspended floors, roofs, landing, beams and balconies(Plan area to be measured)
974
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
206924.98
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
106562.3
-
-
... More
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.
225
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairingstrength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
-
-
-
... More
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cementcontent, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
All works upto plinth level.
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
1149.58
-
-
... More
All works above plinth level upto floor V level.
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
592.01
-
-
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
696.64
-
-
... More
BRICK WORK
-
-
-
... More
Providing and fixing at or near ground level precast cement concrete in kerbs , edgings etc. as per approved pattern and setting in position with cement mortar 1:3 ( 1 cement: 3 coarse sand), including the cost of required centering, shuttering complete.
-
-
-
... More
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal
size derived from natural sources).
8.49
-
-
... More
Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete
-
-
-
... More
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
218.47
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry
802.71
-
-
... More
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.
54.92
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)
52.07
-
-
... More
MARBLE & GRANITE WORKS
-
-
-
... More
Providing and fixing 18mm thick gang saw cut ( premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
-
-
-
... More
Granite of any colour and shade
-
-
-
... More
Area of slab upto 0.50 sqm
18.9
-
-
... More
Area of slab over 0.50 Sqm
2.84
-
-
... More
Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin baesd adhesive including cleaning etc. complete.
11.63
-
-
... More
Providing and Fixing stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 meter height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately)18 mm thick mirror/ eggshell polished granite stone of approved shade.
30.79
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade
2
-
-
... More
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble /Granite/Stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edge etc. complete.
5
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
469.64
-
-
... More
WOOD & PVC WORK
-
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
1.89
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
109.4
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
... More
Fixed to steel windows by welding
28.8
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
16
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
... More
300x16 mm
13
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
300x10 mm
34
-
-
... More
150x10 mm.
4
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
1.31
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
100 mm
4
-
-
... More
125mm
34
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
107.51
-
-
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :2nd class teak wood.50x12 mm.
223.95
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
88
-
-
... More
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.
12
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1 mm thick
218.79
-
-
... More
Providing and fixing factory fabricated steel almirah type shutters to cupboards with or without vision panel, single or double leaf (partly glazed/flush CRC sheet type) as per approved sample with all round frame made of CRC sheet moulded by machine press with following specifications: (i) Door frame using 1.219mm (18 gauge) CRC sheet moulded to required profile. The frame should be fixed to the wall with dash fastners of suitable size at site.
(ii) Openable flush shutter single or double leaf/openable glazed shutter, ribbed/moulded at edges to required profile all round made of CRC sheet 1.219mm thick fixed with the frame with required MS hinges with suitable CRC SHEET supporting brackets rivited/welded with the frame and shutter with CRC sheet 1.219mm thick vertical boxing riveted or welded of approved profile to back face to strengthen the shutter.
(iii) Providing and fixing glazing in fully/partly glazed shutter with PVC gasket with beading welded/screwed of required size and shape with glass panes of 4.00mm thickness(weight not less than 10.00 kg/sqm.)
(iv) Grinding the joints and surface wherever required and applying steel primer putty i/c. sand papering so as to give truly smooth surface for spray painting .
The internal and external metal surface of the door and fittings except glass shall be spray painted with synthetic enamel paint of approved brand and manufacture of required shade etc. complete as per the direction of the engineer in charge. (Overall elevation area of the shutter with frame will be measured for payment).
277
-
-
... More
Providing and fixing approved brand and manufacture of Rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two independent closing valves and latching speed adjustable by arm. Silver finish. As per EN 1154. Approved Make : dormakaba / Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
46
-
-
... More
Providing and fixing approved brand and manufacture of 4012 wall mounted door stop dome with 60mm length with fixing accessories Approved Make : dormakaba / Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge
62
-
-
... More
Providing and fixing approved brand and manufacture of Pure 8100 Type 3 Package with Pair of Pure 8100 Design Lever Handle on Roses & escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square forend. EPC 60mm length oneside thumb turn otherside coin release operation Approved Make : dormakaba / Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
37
-
-
... More
Providing and fixing approved brand and manufacture of Stainless Steel Tower bolt 300 mm long with 10 mm dia ( TR 1210SS) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
92
-
-
... More
Providing and fixing approved brand and manufacture of Stainless Steel Tower bolt 150 mm long with 10 mm dia ( TS 610SS) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
5
-
-
... More
Providing and fixing approved brand and manufacture of Stainless Steel Door Buffer wall mounted 22 mm dia,75 mm long (DB (22) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
62
-
-
... More
Providing and fixing approved brand and manufacture of Stainless Steel Handle 125 mm long with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
92
-
-
... More
Providing and fixing approved brand and manufacture of Stainless Steel Sliding Tower Bolt 300x16 mm long with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
37
-
-
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows, Doors and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With aluminium Snap beading.
18.63
-
-
... More
Providing and fixing steel roller for uPVC / aluminium sliding window with necessary screws etc. complete.
44
-
-
... More
Providing and fixing steel (white power coated) crescent lock for uPVC / aluminium sliding window/ door with necessary screws etc. complete.
22
-
-
... More
STEEL WORK
-
-
-
... More
Providing and fixing bolts including nuts and washers complete.
33373.44
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
667704.1
-
-
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
4.41
-
-
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side /top /centre hung with beading and all members etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer , but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
27
-
-
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
28.05
-
-
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
3268.19
-
-
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete.
5125
-
-
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete.With 4.0 mm thick glass panes.
3.6
-
-
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
34
-
-
... More
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.10 x 60 mm
171
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
3631.36
-
-
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20x20 mm square bar
82
-
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 19.19.1 L D- 2.5 H D - 20Circular shape 560 mm internal diameter
10
-
-
... More
FLOORING WORK
-
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.40mm thick with 20mm nominal size stone aggregate.
1402.25
-
-
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles,including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement.
28.8
-
-
... More
Extra for pre finished nosing to treads of steps of marble stone
108.33
-
-
... More
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre.
193.92
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick :
279.65
-
-
... More
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete..
44.03
-
-
... More
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
62.98
-
-
... More
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre.
32.2
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
206.64
-
-
... More
Providing & Laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer) with water absorption's less than 0.08% and confirming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc, complete.Size of Tile 1000x1000 mm
200
-
-
... More
Providing & Laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer) with water absorption's less than 0.08% and confirming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc, complete.Size of Tile 600x600 mm
366.87
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting / dado, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
24.99
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent.
760.83
-
-
... More
Providing and laying Unbacked flexible P.V.C /marblex flooring/ skirting with P.V.C sheets/ Marblex tiles as specified below of approved make and shade including preparing the surface, cleaning as required and applying adhesive - as recommended by the P.V.C / Marblex tile manufacturers, laying, aligning, cutting in required size and pattern, trimming of tiles, removing the adhesive stains on the surface including cleaning the surface with soap solution (2 table spoons of soap powder for 5 ltrs of water) using a cloth or mop or and wiping the dried surface with soft dry cloth etc; complete all as per specifications.In PVC flooring/ skirting/ dadoing: With 2mm thick Unbacked flexible fully homogeneous PVC sheets in rolls of approved make and quality - viz Poly floor of M/s. Poly floor vinyl flooring or TUSKER of M/s. Krishna vinyls Limited or Birla vinoleum of M/s Birla corporation Limited or equivalent make conforming to IS: 3462-1986.
200
-
-
... More
Providing and laying modular carpet of approved make and shade and made with 100% nylon 6/6.6 tufted textured tip sheared/ cut & loop piles, tiles of minimum 500mm x 500mm in size, stain resistant, anti microbial, and having colour fastness to water, fastness to light, rubbing fastness and castor chair suitability as per relevant standard for heavy commercial usage, with PVC free backing, nominal total thickness of minimum 6.50 mm, pile height minimum 3.4 mm, minimum Total Pile weight – 800g/sqm). Material shall be CRI GREEN LABEL PLUS certified, and shall have recycled content complying to GRIHA requirement, including fixing with GRIHA compliant adhesive of approved make, all complete as per drawings, manufacturer's specifications and direction of Engineer in Charge.
165.87
-
-
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
283.79
-
-
... More
ROOFING
-
-
-
... More
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).
772
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC RAIN WATER PIPES conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 110 mm dia
213.45
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.coupler 110 mm
43
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.bend 87.5 degree 110 mm bend
29
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.bend 87.5 degree Shoe(plain) 110 mm
15
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, 12.5 mm thick tapered edge gypsum moisture resistant board.
864.21
-
-
... More
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
95.57
-
-
... More
Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183,density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building.
1471.6
-
-
... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6
1281.57
-
-
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
675.41
-
-
... More
1Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)
85.23
-
-
... More
1Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self drilling/ self tapping screws complete :Barge Board (upto 300mm)
43.72
-
-
... More
1Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self drilling/ self tapping screws complete :Gutter(600 mm overall girth)
151.22
-
-
... More
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
175.8
-
-
... More
12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
527.4
-
-
... More
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.
637
-
-
... More
Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately).
1758.83
-
-
... More
Double Skin Aluminium Standing Seam Roofing System with galvalume LinerSupply and fixing of KALZIP “SELF SUPPORTED” SECRET FIX STANDING ROOFING SYSTEM IN 0.9mm THICK AA 3004/3005 ALUMINIUM ALLOY. The general roof-construction shall comprise from top to bottom :
i)-Top layer – Kalzip 65/400 Straight profile sheeting manufactured from aluminiumself supported standing seam roof system from aluminium alloy AA 3004/3005 H46 (AlMn1Mg1) as specified in BS EN 1396: 2015 material thickness of 0.9 mm and in finish of PVDF2 consisting of anti corrosive primer of 5 microns, topcoat of PVDF in 20 +/-2 microns with the Total coating thickness as 25 Microns. The coil for the top panel shall have 75 microns transparent protective guard film with the roofing manufacture name printed, This Guard film prevents scratches during roll forming & handling.The material properties shall be as follows: Ultimate tensile strength minimum 200 N/mm2, 0.2% Proof Stress: min 185 N/mm2, Sheets are to be laid to meet the requirements of thebuilding geometry and fixed on aluminium ST clips. Clip to be fixed over tophats/Purlins with SS 304 screws only.The head of clips shall be fixed accurately to ensure the roof sheeting to expand and contract freely during thermal movement.
Second Layer– Rockwoolinsulationof100mmthickness and minimum 60 kg/m³ density with thermal conductivity of K=0.038W/mkat20degreesCelsiuswhentestedto ASTMC518. (Make Rockwool India/Roxul)
1461.18
-
-
... More
FINISHING WORK
-
-
-
... More
12mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
4097.68
-
-
... More
6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand)
2141.94
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
2153.42
-
-
... More
Add or deduct for plaster drip course/ groove in or moulding to R.C.C. projections.plastered surface
1039.13
-
-
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
1225.2
-
-
... More
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
252.9
-
-
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats
360.8
-
-
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats.
5878.82
-
-
... More
Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
5878.82
-
-
... More
Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
2116.07
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
97.35
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
7550.34
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work.
12917.54
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
165.99
-
-
... More
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
192.59
-
-
... More
SIGNAGE Room Signages (Stainless Steel with single color/Multi color engravings)
-
-
-
... More
office/ Sports Room/ toilet /store/coach/Meeting Room/ ups /electrical room/G.Toilet & Ladies Toilet etc with symbol/Pantry/Fire exist/rest room or for anyother area as per the direction of EIC. The SS plate of approximate size 200mmx400mm shall be 304 grade of approved shape as per drawing. single color/Multi color engraved signage Font and letter sizing shall be got aproved by the architect-sample shall be submitted. Rate shall include all hardware and necessary arrangement for fixing.
15
-
-
... More
Providing and fixing GI hexagonal chicken wire mesh of size 12mm x22g at the junction of disimilar surfaces of brick masonry wall and R C C column by beams and the like including necessary nails for fixing etc, complete all as per specification and direction of Engineer -in -charge for all floor at all heights.
111.72
-
-
... More
ALUMINIUM WORK:-
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Glazing and paneling to be paid for separately) :For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron)
679.1
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
817.04
-
-
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides
23.27
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With clear toughened glass panes of 6 mm thickness
104.73
-
-
... More
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
3.96
-
-
... More
Filling the gap in between aluminium frame and adjacent RCC/Brickwork/ Stone Work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-chargeUpto 5mm depth and 5mm width
348.9
-
-
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
681.56
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
21.12
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, fasteners screws etc as desired. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
468.22
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural/ curtain wall glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including :
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalization & drainage and protection against fire hazard including: b) Fabricating and supplying serrated M.S. hot dip galvanized / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers. c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight. e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer in-Charge. Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural/ curtain wall glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
78.04
-
-
... More
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened (as approved) glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner heat strengthened (as approved) clear float glass 6mm thick, spacer tube 12mm wide, desiccants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.1.8.16 above). For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (To be fixed on extruded aluminium sections. and cost of aluminium sections to be paid in relevant item)Coloured tinted float glass 6mm thick Heat Strengthened substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc.
78.04
-
-
... More
Flashings manufactured from aluminium alloy AA 3004/3005 (AlMn1 mg 1) as specified in BS EN:1396:2015 material thickness of 0.9 mm & same finish as panel. Flashing girth to be upto 500mm
370
-
-
... More
Extra for openable side / top hung vision glass panels (IGUs/laminated glass) including providing and supplying at site all accessories and hardware for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer in- Charge..
3.9
-
-
... More
WATER PROOFING
-
-
-
... More
All concrete should be admixed with integral Hydrophilic Crystalline Admixture c reputed makes like Bulwark. Taskmek, Penetron. Grace or equivalent for reducin permeability by more than 90% when tested as per DIN 1048 part 5 (after applying cycles of hydrostatic pressure), for self-healing of cracks up to a width of 0.40 mm, for reduced sulphate attack and for high early strength of concrete etc. This should meet the requirements Specified in the recommended dosage rate of 0.80 % complete as per manufacturer's specifications to the entire satisfaction of Engineer-in-Charge. Hydrophilic Crystalline Admixture shall also have a corrosion inhibitant property and shall be compatible with any other water reducing concrete chemical admixtures added to concrete for workability purpose. Crystalline formation shall be mix of cylindrical & circular in shape to have maximum filling of pores. The admixture used shall have manufacturer's test reports and approval mandatorily both from IIT's and IRC (Indian Road Congress).
18439.83
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed withwater proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)
75.74
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm
1027.98
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm.
2000.38
-
-
... More
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :Serrated with central bulb (225 mm wide, 8-11 mm thick)
99.8
-
-
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 3 mm thick
113.39
-
-
... More
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.
113.39
-
-
... More
ROAD WORK:-
-
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres.
420.59
-
-
... More
Supplying and Stacking of Good Earth by mechanical transport including loading, unloading including royalty & carriage up to 5 KM complete
171.18
-
-
... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
171.18
-
-
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin- Charge.With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
90.99
-
-
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
85.24
-
-
... More
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete..
2667.6
-
-
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade.
191.52
-
-
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge.
55.59
-
-
... More
Extra for providing and mixing hardening compound of approved quality as per manufacturer’s specification in cement concrete.
31
-
-
... More
Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)
99
-
-
... More
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. Using grade 'A' sealing compound conforming to IS: 1834.
99
-
-
... More
Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete.New work (Two or more coats)
13.5
-
-
... More
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge.
10
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
1.35
-
-
... More
Providing and laying factory made coloured chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineerin-Charge.60mm thick C.C. paver block of M-35 grade with approved colour, design & pattern
25
-
-
... More
Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in charge.
10
-
-
... More
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.complete 450 mm dia RCC pipes.
25
-
-
... More
HORTICULTURE & LANDSCAPING WORKS
-
-
-
... More
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 16 mm
2.5
-
-
... More
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 4.75 mm
2.5
-
-
... More
Fine dressing of the ground.
50
-
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
171.18
-
-
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
171.18
-
-
... More
Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and earth shall be paid for separately).With grass Turf
50
-
-
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)
10
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 1.2 m dia and 1.2 m deep
5
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 90 cm dia, and 90 cm deep
2
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 60 cm dia, and 60 cm deep
2
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes Holes 45 cm dia, and 45 cm deep.
5
-
-
... More
Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm
10
-
-
... More
Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required frame work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inner width 35 cm, outer bottom width 25 cm, total height 35 cm and wall thickness 25.4 mm
5
-
-
... More
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
50
-
-
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.)
50
-
-
... More
Complete maintenance of shrubs (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
25
-
-
... More
Providing & fixing of White River (Stone) Pables size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.
1
-
-
... More
Providing and applying anti termite treatment of infected trees i/c all branches/leaves by spraying chemical emulsion 0.5% (Chlorpyriphos 20% EC) concentration through power spray machine (@ 100 ml Chlorpyriphos per tree i/c cost of chemical) and as per direction of officer-in-charge.and as per direction of officer-in-charge.
5
-
-
... More
Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge
50
-
-
... More
Rose Plant Providing and Displaying plants Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.
2
-
-
... More
Providing and Displaying plants Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
3
-
-
... More
Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
4
-
-
... More
Ornamental Plants Providing and Displaying Acalypha plant Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge.
5
-
-
... More
Providing and Displaying Acalypha red plant well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.
3
-
-
... More
Providing and Displaying Ficus reginold piller type Topiary plant well developed with fresh & healthy 210 to 240 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
2
-
-
... More
Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
2
-
-
... More
Providing and Displaying Ficus Long Island topiary plant well developed with fresh & healthy 5 to 6 ball specific size and shape 120 to 150 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
2
-
-
... More
Ground Covers Plants Providing and Displaying of Clerodendron inerme plant of ht. 30 cm to 40 cm multi branched in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
2
-
-
... More
Providing and Displaying of Iresine herbstii plant, of height 20-30 cm., full of branches well developed in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..
5
-
-
... More
Providing and Displaying of Wadelia trilobata plant,full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge
7
-
-
... More
Tree Plants Supply and stacking of Alstonia scholaris plant of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge.
3
-
-
... More
Supply and stacking of Bauhinia blakeana (Kachnar) plant of height 120- 150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
2
-
-
... More
Supply and stacking of Ficus benjamina (green) plant of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.
4
-
-
... More
Supply and stacking of Ficus religiosa (Peepal) plant of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.
2
-
-
... More
Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v
3
-
-
... More
Supply and stacking of Plumeria acutifolia plant of ht.50-165 cm. with 3-4 branches in big size HDPE Bags as per direction of the officer-in-charge.
2
-
-
... More
Supply and stacking of Washingtonia filifea palm plant stem ht. 120-135 cm with 8-10 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the officer-in-charge.
2
-
-
... More
SHRUBS Supply and stacking of plant Caesalpinia pulcherrima species of height 45-60 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.
2
-
-
... More
Supply and stacking of plant Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge.
3
-
-
... More
Supply and stacking of plant Hamelia patens of height 30-45 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge.
4
-
-
... More
Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.
5
-
-
... More
Supply and stacking of plant Tabernaemontana coronaria (Chandni single) of height 90-105 cm,bushy in big size HDPE bag as per direction of the officer-in-charge.
2
-
-
... More
Supply and stacking of plant Tecoma gaudichaudi of height 90-105 cm.,bushy in big size HDPE bag as per direction of the officer-in-charge.
4
-
-
... More
Providing and fixing Glass Reinforced Concrete (G.R.C) Screen at all levels & heights in approved size, pattern, design, thickness (minimum 35mm) and color. The Screens should be made from White Portland Cement, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber, Super Plasticizers, Polymers and U.V resistant Synthetic inorganic pigments should be used for pigmentation. The material casting should take place in Synthetic Rubber / FRP Mould. The fixing of Jali should be ‘Dry fixing’ i.e. to be done with MS/SS ‘L’ shaped Clamps, dash fasteners and pins etc complete as per site requirment and direction of Engineer-in-charge.
312.75
-
-
... More
Providing and fixing Stainless steel 304 Grade H- type pull handle of size min 32 mm dia and 1200mm long of approved make including SS screws, including making holes of required size in shutter etc. complete as per direction of Engineer-in-Charge.
16
-
-
... More
Providing and fixing SS Bottom patch Lock with cylinder of approved make including necessary screws etc. all complete.
6
-
-
... More
Providing and fixing SS floor mounted half dome door stopper of dia 45mm including necessary screws etc. all complete.
8
-
-
... More
FRAMELESS GLASS PARTITION Providing and fixing in position 12 mm thk Toughened Clear Glass in partition panels by using various glass fittings of approved make (DORMA / HAFELE / HETTICH) to be fixed with necessary fittings on the ceiling duly finished without giving any load on the false ceiling by using necessary hardware of Dorma / Hafele make what ever necessary and required numbers to complete the job in all respect. Rate including cost of door opening with approval hardware such as patch fitting lock, handle etc of approved make but without cost of floor spring. Contractor is advised to submit working drawing with details of approved make patch fitting, sizes of glass panels etc and take approvals of consultants before execution of works. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge.
151.21
-
-
... More
Supplying and installing roller blinds of approved make, model and shade at all heights and location and required width and comprising of approved shade and quality fabric, 1 mm thick anodized extruded Aluminium alloy roller tube of 38-mm O.D , a bidirectional operating Clutch mechanism designed for adjustment-free, slippage-free, crash proof smooth operation for all heights, high strength fiber glass reinforced polyester idler, powder coated steel Insert type brackets fitted with roller tube, round bottom rail, control unit engrooved with a Ball Pitch of minimum 6.5mm, Stainless Steel Ball Chain, and powder coated atomized steel installation brackets. The clutch mechanism comprises of a SS beaded chain and carbon steel spring wrapped by means of a high strength fiber glass reinforced polyester assembly to transmit motion from driving to driven members. The installation brackets shall facilitate overhead, side or face mounting with clutch assembly on either end of the roller. Idler shall consist of a centre shaft and outside sleeve which provide bearing surface for roller tube and rotate freely on centre shaft for smooth and quiet operation.Bottom rail along with the fabric shall be enclosed in a suitably created pocket and shall be of powder coated aluminium tube and closed from sides with end caps. The item includes all fittings, accessories, brackets, screws, anchor fasteners, fabric as per approved sample and shade all complete as per drawings, tender specifications, relevant standards and direction of Engineer in charge. (Height of blind from top bracket to bottom tube and width from bracket to bracket shall be measured for payment) Composition- 30% Polyester (max),70% PVC on Polyester(min),
Openness factor- 3-5%(as approved)
Weight (gram/ sqm)- min 440 gm/sqm
Thickness- min 0.60 mm
Fire Classification- Class A( NFPA 101 or Class 1 (UNE EN 13773) or equivalent as per relevant standards and specifications
Fastness to light- 6-7/8 or higher
Indoor Air Quality- GreenGuard / Eco-Codice Certified. Manufacturer's warrantee- minimum 5 years
154
-
-
... More
Fabrication, supply and Installation of New clear line glass railing system by Ozone made of Heavy duty aluminum U Type Hollow walls Base channel ( HWBC) (OZRF-NCLSYS- HWBC-AL) AL-6063 grade with mill finish of size 12.5mm( thick)72( wide)x122 mm( height). Glass Specs. is 16.89mm thk (8mm CT+ .89SGP+8MM CT) to be GRIPPED with fixing kit (OZRF-NCL-ACC-KIT-17MM) made of self-pushing clamps ( SPC) made by hardened aluminum -6063 grade each at maximum 350mm cc to cc . glass should be lifted from base by Solid Nylon L Block separates at least 3 nos/ meters. HWBC to be fixed with M12 GI stud chemically grouted. Glass should be fixed with completely dry system so that in case of breakage it can be changed without any silicon cutting and very fast as well.. exposed edges of HWBC (if any) to be covered with SS 304 grade end caps. The Top Edge of glass will be covered with SS 304 grade Round slotted tube of Dia42x1.5 mm thk. fixed on the glass edge with EPDM gasket. The Vertical joint of glass will be free from silicon. The total height of the system will be max. 900 mm from ledge top, All top rail joints will be joined by using argon welding only.
170.14
-
-
... More
Providing and fixing film etching with plotter cutting and application of 3MM/LUMAR/GARWARE make as per approved design on glass surfaces all complete as per instructions and patterns and design of the Architect.
75.61
-
-
... More
Providing and fixing in position wall paneling of Credence grooved wood panels estoof width 192mm, thickness of 16mm and length 2440 mm made up of high density fibre board with minimum density of 800 Kg/m3 substrate with a laminated facing as per the approved shade/species & finish with melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 3 mm grooves at 21mm pitch. The panels shall be highly moisture resistant and have fire resistance of Class I,BS 476 part 7.The edges of the panels shall be “tongued-and-grooved” to receive special clips for installation. The back of the perforated panels shall have sound absorbing non-woven acoustical fleece and backed with 50mm thick rock wool layer as directed by the Engineer-in-Charge. The panels shall be mounted on special channels using clips as approved by the Engineer -in-charge. Install G.I stud of section 48X34X36 mm or as approved by the Engineer -in- Charge on the solid wall using screws at spacing of 600mm centre-to-centre. Screw the aluminum channel (keel) on channeled G.I stud 600mm centre to centre. Install the first set of wooden panels by inserting the clips. For border channel insert the groove of the panel in to the projecting flange of the clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channel into the next aluminum channel (keel) and simultaneously fill the gap between wall & panel with 50mm thick rock wool having density of 48 kg/m3. Continue the process till the actual height is achieved. Use clips for border channel to finish off the installation, finish the edges and joints using wood molding of matching color (to be provided by others) as approved by Engineer-in- Charge. The installed panels should give an NRC of 0.9.
15
-
-
... More
Supply and installation of multipurpose synthetic flooring cast-in-situ Conipur HG Eco approved byIHF, BWF, FIBA
1334.49
-
-
... More
Supply and installation of acoustic Flexible partition wall with 100 k/u hung from true ceiling with necessary MS support holding the track with heavy duty ball bearing roller hinges in the track for easy movement ,interlocking with female and male trapezoidal vertical aluminium profile with magnetic strip between the panels. Retractable sound seal at Top and bottom of element to avoid sound percolation between panels to be provided. Top and bottom with panel thickness of 19 mm Commercial ply ,finished with fabric as per drawing. Overall thickness of the Shutters to be 90-100 mm ,necessary ply or gyp sound baffles to be provided on top of track on either side to achieve 52 bd level of sound.
152.98
-
-
... More
Providing & fixing of standing seam multiwall flux polycarbonate panel system along with standard accessories. UV protected polycarbonate panels with minimum 16 mm thickness in six layers with angular daylighting concept in a combination of opaque & translucent color layer combination inside the layers & will be fixed on appropriate structure (MS framework will be paid separately) with double tooth locking mechanism and snap on Aluminium U connector bearing minimum sectional size of 54mm x 32 mm x 1.5 mm thick in mill finish to counter high wind uplift of NE states. Panel shall be fixed in 500 - 700 mm width to take 7000N (7KN) load, tested as per ISO 6892:1998 and IS 1608: 2005. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall have a Yellowness Index as per ASTM D 1925 of not more than 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 2.1 W/m2K as per EN ISO 10077-2:2018. All work should be complete as per above specs, drawing & direction of the engineer in charge. Color: As Approved.
592.54
-
-
... More
Supply & Installation of 25 mm thick (minimum) DPI Daylighting Panel system in cladding with 1100-1300 mm wide module comprising of seven layers with integrated angular opaque louvers with transparent body of the panels enhancing the diffusion of light and achieving the translucent diffused effect along with 10-15 mm high standing seam on both sides of the panel. Panels shall be fixed in reverse using Aluminium connector.
1191.72
-
-
... More
Providing and fixing in position factory made non asbestos fibre reinforced aerated cement sandwich wall/roof/floor light weight solid core panels made of light weight cement concrete core composed of OPC cement, pulverized flyash, quick lime, cotton pulp & Gypsum in mortar state mixed with aeration agent in a preset mould. The outer face on both sides of the panels will be non asbestos fibre cement board confirming to IS 14862:2000. These solid wall panels are installed using Galvanized iron steel tracks/C channel of 1mm thick of required sizes as recommended by manufacturer's and fixed to floor and RCC soffit in plumb to each other with steel screw/ fasteners. The panel shall be fixed vertically with tongue & groove joint with cement based polymer modified jointing compound. The exposed surface finished with fibre mesh/glass fibre tape with polymer based jointing compound having superior flexibility. Panels should be used as floor & roofing with additional structural support, steel or RCC depending upon the design. All the operation shall be completed in all respect as per drawings, Manufacturers specifications and under the overall direction of Engineer-in-Charge (Cost of all the material is included except "tracks/C channel" which will be paid separately).Non load bearing panels 75mm thick of required size (minimum 5mm thick fibre cement board)
650
-
-
... More
Providing and fixing Ladakhi Ornamental Shingstak of Kail wood 22" high (Complete job), (All outer Door & Window facade)
1
-
-
... More
Providing and laying Laminate wooden
flooring (Grade AC6 or AC6+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fibreboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminium oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer.
185
-
-
... More
Providing and laying Laminate wooden flooring (Grade AC4or AC4+ laminates) 6 mm to 12 mm thick, having a good backing layer made up of plastic laminate or melamine, core made up of medium-density fibreboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminium oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer.
108
-
-
... More
Providing and fixing certified restroom cubicle system of approved make comprising of green guard certified solid compact laminated water proof board, minimum 18 mm thick made as per IS: 2046 (phenolic core board) and as per BS-476/97 for fire retardant for toilet showers, water closet etc . The board shall be manufactured under high pressure and temperature by impregnating kraft papers and outer decorative papers with thermosetting phenolic/ melamine resins (low VOC). The cubicle system shall be resistant towards water, chemical, scratch, impact and heat and shall be anti bacterial, colour fast and shall have accessories like door knob, Gravity/ auto return hinges, privacy thumb turn with occupancy indicator, coat Hook, etc all in SS 304. The hardware and fixings includes anchoring of all fixed front panel to floor with SS 316 L brackets/ base plates with a clearance height upto 110 mm, and covered with SS 316 Shoe box plates, wall and corner joineries (brackets and channels) shall be SS 304 grade, SS 304 screws, rubber noise reduction tape .
-
-
-
... More
The cubicle unit shall be installed in approved finish, shades and colours as per specifications and directions of Engineer-In-Charge, including minimum 5 (five) years warranty against any moisture related damages to all intermediate panels, doors, hardqwares etc. Standard dimension of the cubicle system shall be of approx. 2100 mm Height(overall) x 1500mm Depth and 1000 mm Width which includes 600mm door size width.
-
-
-
... More
I shaped Cubicle System consisting of front face panel including door and all necessary accessories, fittings and hardware etc.
36
-
-
... More
L shaped Cubicle System consisting of front face panel including door, intermediate panel and all necessary accessories, fittings and hardware etc.
48
-
-
... More
Providing of Polymeric Formliners wooden planks or roofing slate design or in other approved design and pattern of Everest/Birla/Dalal/Unistone make.
The Formliners Sheet thickness of 5 mm made with fire retardant polyester resin based on phthalic anhydride and standard glycols with additives that
give excellent fire-retardant properties with reference to IS 6746. Glass fiber of Owens Corning or Equivalent of 300 to 450 gsm mat to be used added with suitable pigments by reputed manufacturer. Formliners shall be fixed with suitable approved fasteners to the surrounding on surface of RCC/ masonry work/ MS frame. The Formliners must be fixed in true to line & level/ plumb with edges finished provided without any extra cost to client. Any MS/Aluminium supports, if required, shall be paid for separately.- External Cladding on walls
305
-
-
... More
Providing and fixing of fire retardant fabric panels (colour as approved by the consultant) glued to 25mm thick melamine foam over a layer of 9 mm thick commercial ply with 15% perforations fixed over a framework of 48mm GI Stud of 0.55mm thk @ 600mm c/c . The ply to have perforations as per design drawings. The foam to be backed with 50mm 1000GSM thermally bonded polyester wadding. The rate includes for all Geometry of wall, openings etc. and for complete item including all the required approved material, labour and fixing as per drawings. The work shall be executed by the suppliers Authorized applicators.
108
-
-
... More
SPORTS
-
-
-
... More
Table Tennis Top Thickness - 22 mm laminated
Frame - 25 x 40 mm
Wheel Size - 75 mm
No. of Wheels - 2 with locks, 6 without
Paint - DuPont Polyurethane Anti Glare
Size - 2740 x 1525 x 760 mm
Net Weight - 96 kgs
Weight when Packed - 103 kgs
Storage Size - 160 x 160 x 67 cms
Package Size - 161 x 145 x 15 cms
Volume- 0.35 Cbm Brand:Trenz/Stag/Stiga
4
-
-
... More
Boxing Ring • Size 25.5ft X 25.5ft from corner poles with Litlon foam.
• Size 20ft x 20ft from rope to rope i.e., playing area.
• Height of ring is 3 ft from ground level.
• All four Rope Outer dm 3.5” made by Steel Wire and covered from foam and rexien.
• Corner Poles made of 4” pipe, B Grade pipe in white, blue and red Colour. • Total Wooden floor is covered with 18mm (E.P). Expended polythene foam (it called “Heat Sheet” in normal language). Then this foam is covered with waterproof canvas cover (Size is 26.5ft X 26.5ft, Superior Quality)
• Four protection corner padding are used to cover corner poles.
• Neutral corner pad having pocket for gouges and tissues.
• Funnel, Tube, three stairs, basket, spry bottle etc. are provided with ring.
• Corner pad rounded on the pole. • All sixteen-hook cover. • Eight Rope belts for spats the ropes. Brand: Trenz/force10/Fastrun
1
-
-
... More
Judo Mat (9m X 9m) Size - 2m x 1m x 60mm Brand: Trenz/force10/Fastrun
1
-
-
... More
Martial Art Mat (11.6m X 4.8m) Interlocking System by IKF Approved (1mtr x 1mtr x 25mm) JSR+EVA
Density – 130 (kg/m3)
Hardness – Shore A (32) Brand: Trenz/force10/Fastrun
1
-
-
... More
Karate mat (9m x 9m) TRENZ-Brand Interlocking System by IKF Approved (1mtr x 1mtr x 25mm) JSR+EVA
Density – 130 (kg/m3)
Hardness – Shore A (32) Brand: Trenz/force10/Fastrun
1
-
-
... More
Motorized Treadmill
• Dimension : 80″(L) X 37″(W) X 63″(H).
• Motor : AC Motor, 4.5 HP Continuous Duty, 8.0 HP Peak Duty.
• Speed : 1.0 To 20 Kmph.
• Elevation : 0% To 20%
• Running Surface : 61″ (L) X 24″ (W).
• Programs : 8 Pre-Set Programs, 2 User & 1 Manual
• Display : Profile Matrix LED With 6 Window Display.
• Power Requirements : 220V AC.
• Max User Weight : 180 Kgs. Brand : Aerofit/fitking/Fitline
3
-
-
... More
Spin Bike Dimension : 48” (L) x 24”(W) x 52”(H)
Spin Wheel : 20 Kgs high inertia spin wheel.
Drive System : Centre design drive, Smooth, quiet belt drive mechanism.
Seat : Horizontally and vertically adjustable saddle with quick release.
User Weight : 200 Kgs Brand: Aerofit/fitking/Fitline
2
-
-
... More
Elliptical Cross trainer
• Dimension: 88” (L) X 27”(W) X 63”(H)
• Strides: 20 Inches natural strides.
• Resistance Level: 40 Levels.
• Fly Wheel: 10 Kgs precision balanced.
• User Weight: 175 Kgs. Brand : Aerofit/fitking/Fitline
2
-
-
... More
Rowing • Air Resistance Technology For Highly Effective Workout Which Targets Every Major Muscle Group.
• High Strength Nylon Pedal Strap For A Smooth & Quiet Pull.
• Resistance: 9 Resistance Level.
• Requires 8 X 3-Ft. Space; 2-Piece Design For Storage.
• Max. User Weight: 130 Kgs
Brand: Aerofit/fitking/Fitline
1
-
-
... More
Latpull/Rowing • Dimensions: 1565 (L) x 1030 (W) x 1455 (H) MM
• Tube Gauge: 3.0mm, with Capsule tubing
high tensile steel.
• Rust Proof: Electro statically powder coated.
• Weight Guide Rods: 20 mm, Chrome plated solid steel, highly polished for smooth movements.
• Weight Plate: Cast iron, machine drilled to exact specs and oversized nylon bushings for super smooth operations.
• Cable: 5.0 mm dia., 2500 lbs rated, mil. spec., nylon coated steel cable
• Pulley: 85 mm diameter
• Metal protective weight enclosures
• Seat, Pads & Grips: Ergonomic and adjustable design shape meets all user requirements for comfort and stability. • Weight Stack: 242 lbs / 110 Kgs.
Brand : Aerofit/fitking/Fitline
1
-
-
... More
Pec dec/Rear Delt • Dimensions: 1860 (L) x 1310 (W) x 2020 (H) MM
• Tube Gauge: 3.0mm, with Capsule tubing
high tensile steel.
• Rust Proof: Electro statically powder coated.
• Weight Guide Rods: 20 mm, Chrome plated solid steel, highly polished for smooth movements.
• Weight Plate: Cast iron, machine drilled to exact specs and oversized nylon bushings for super smooth operations.
• Cable: 5.0 mm dia., 2500 lbs rated, mil. spec., nylon coated steel cable
• Pulley: 85 mm diameter
• Metal protective weight enclosures
• Seat, Pads & Grips: Ergonomic and adjustable design shape meets all user requirements for comfort and stability. • Weight Stack: 242 lbs / 110 Kgs. Brand: Aerofit/fitking/Fitline
1
-
-
... More
Leg Extenstion/Curl • Dimensions: 1565 (L) x 1030 (W) x 1455 (H) MM
• Tube Gauge: 3.0mm, with Capsule tubing
high tensile steel.
• Rust Proof: Electro statically powder coated.
• Weight Guide Rods: 20 mm, Chrome plated solid steel, highly polished for smooth movements.
• Weight Plate: Cast iron, machine drilled to exact specs and oversized nylon bushings for super smooth operations.
• Cable: 5.0 mm dia., 2500 lbs rated, mil. spec., nylon coated steel cable
• Pulley: 85 mm diameter
• Metal protective weight enclosures
• Seat, Pads & Grips: Ergonomic and adjustable design shape meets all user requirements for comfort and stability. • Weight Stack: 242 lbs / 110 Kgs. Brand : Aerofit/fitking/Fitline
1
-
-
... More
Leg Press • Dimension : 2820"(L) X 1630"(W) X 1340"(H). MM
• Tube Gauge: 3.0mm, with Capsule tubing
high tensile steel.
• Twin Weight Stack holders each side to load plates.
• Rubber Pad at foot positiong area.
Saftey Lock Required.
• 600 Kgs Max Weight Loading Capacity.
• High Quality Linear Bearing.
• Rust Proof: Electro statically powder coated.
• Weight Stack: Free Weight. Brand: Aerofit/fitking/Fitline
1
-
-
... More
Olympic Decline Bench • Dimension : 75"(L) X 65"(W) X 32"(H). MM • Tube Gauge: 3.0mm, with Capsule tubing
high tensile steel.
• Rust Proof: Electro statically powder coated. Brand: Aerofit/fitking/Fitline
1
-
-
... More
Olympic Flat bench • Dimension : 75"(L) X 65"(W) X 32"(H). MM • Tube Gauge: 3.0mm, with Capsule tubing
high tensile steel.
• Rust Proof: Electro statically powder coated. Brand: Aerofit/fitking/Fitline
1
-
-
... More
Olympic incline Bench • Dimension : 75"(L) X 65"(W) X 32"(H). MM • Tube Gauge: 3.0mm, with Capsule tubing
high tensile steel.
• Rust Proof: Electro statically powder coated. Brand: Aerofit/fitking/Fitline
1
-
-
... More
Dumbbell Rack Brand: Aerofit/fitking/Fitline
1
-
-
... More
Dumbbells H Designed
Sizes: 2.5 Kg, 5 Kg, 7.5 Kgs, 10 Kg, 12.5 Kg, 15 Kg,17.5 Kg, 20 Kg, 22.5 Kg, 25 Kg, 30 Kg, 35 Kg, 40 Kg Brand: Aerofit/fitking/Fitline
200
-
-
... More
Plate Tree Rack Brand: Aerofit/fitking/Fitline
1
-
-
... More
Rubber Plates Radial Plates 28/50 mm (Per Kg)
Sizes: 2.5 Kgs, 5 Kgs, 7.5 Kgs, 10 Kgs,
15 Kgs, 20 Kgs, 25 Kgs Brand: Aerofit/fitking/Fitline
200
-
-
... More
Olympic Rod Weight Capacity 250 Kg Brand: Aerofit/fitking/Fitline
40
-
-
... More
Rod Rack Brand: Aerofit/fitking/Fitline
1
-
-
... More
Movable Basketball Poles (Brand -Trenz)
Basketball pole movable adjustable height spring loaded. Base made of 125mm x 62mm rectangular high quality steel pipe and beam formed by 125mm x 125mm square pipe with 3.2 meter projection. PU wheels with stoppers for restricting the movement of the pole during the play. Basketball Board imported acrylic 25mm thick size 180cm x 105cm with International Standard frame, double frame of aluminium powder coated with built in brackets for mounting pressure release dunking ring, high quality nylon net. Special padding made of non-tearing PVC cover and EPE foam front and both sides for the safety of the player. Height adjustment is spring assisted mechanism so that the unit can be easily handled by one person. Ring is bolted through the backboard into the main frame construction for extra strength and durability. Use of branded MRF Epoxy paint. Brand: Trenz/force10/Fastrun
1
-
-
... More
Movable Badminton Poles (Brand -Trenz)
Made of 40mm round pipe with 70 Kg. embedded weight on each pole, combined weight of both poles is approx.140kg. Easy moving on 2 double PU Wheels which are non-marking branded wheels to help protect floors. External special ratchet system to tight the net wire easily and quickly. Weights are covered with non-tearing PVC cover. Use of branded MRF Epoxy paint. Brand: Trenz/force10/Fastrun
4
-
-
... More
Movable VolleyballPoles (Brand -Trenz)
Made of 3” x 4” Mild Steel pipe height adjustable with inside special ratchet system for tightening the net. This enables perfect tension control for the net. Trolley made from 4” x 2” MS pipe with removable Iron box filled type, weight. Per pole is approx. 200 kg. Combined Iron weight of both poles is approx. 400 kg. Iron weights are covered with non-tearing PVC cloth. Easy moving on 2 fixed type PU wheels and one collapsible PU wheel, which are non-marking branded wheels to help protect floors. Use of Branded MRF Epoxy paint. Brand: Trenz/force10/Fastrun
1
-
-
... More
HVAC
-
-
-
... More
Supplying , Installation , Testing and Commissioning of Electric resistance immersion type Hot Water Generator made of 10 mm thick MS sheet, complete with all accessories and components, copper tube chrome plated , internally factory wired complete with electrical panel with 50 mm thick resin bonded fiber glass wool cladded with 0.6 mm Aluminium sheet on MS frame welded to generator body as per specifications and drawings.The Unit shall be complete in all respect and shall be factory tested with reports submitted and it should meet the specification,Drawing & Schedule. The unit shall be BMS compatible
Specification:Hot Water IN 45°C,Hot water OUT 50°C,Hot Water Flow 184 GPM,Working PSI 230 PSI, Test Pressure 300 PSI, Capacity - 230KW (1W+1S)
2
-
-
... More
Supplying , installation, testing and commissioning of mentioned capacity & hot water circuit with VFD. The pumps shall be close coupled , single stage , centrifugal , end suction with back-pull out design with Dedicated microprocessor based pump controller with parallel pumping software duly downloaded, suitable to run on variable frequency drives as required and multiple differential pressure sensor / transmitters as necessary and as described in the specifications. Hence , the rotating unit can be removed and serviced without disconnecting the suction and discharge piping. The pump and base frame shall be factory assembled at the pump manufacturer’s facility. Installation instructions shall be included with pump at time of shipment. The pump manufacturer shall have complete unit responsibility.The Unit shall be complete in all respect and it should meet the specification,Drawing & Schedule. The scope of work shall include Lifting, shifting & positioning of pump at location shown on drawing.1 No. End suction/vertical split casing type pump1 NO- Suitable HP, TEFC squirrel cage induction motor with class 'F' insulations & efficiency class IE-4, 1450 rpm synchronous speed , The total sound intensity with all pumps in operation should not exceed 75 dB at a distance of 2 meters. The Pumps to be capable of providing 10% higher flow rate. All rotating parts are to be covered with an encasing. The duty point of the pump shall be defined in the pump curve.operating on 415 +10% volts ,3 phase , 50 Hz A.C.supply.Variable secondary Panel should have One dedicated multi pump processor based pump controller with parallel pumping software duly installed.The pump selected for variable speed drive shall be capable of performing satisfactorily over a wide range of speed, allowing a speed variation from 20 % to 100 %.The pump logic controller assembly shall be listed and approved by Underwriter's Laboratory, Inc. (UL). The controller shall be specifically designed for variable speed pumping applications.Microprocessor based control panel shall have suitable hardware & software so that it can be integrated directly to IBMS with standard communicationopen protocol using backnet / Modbus as well as open IP.(All the Pump set will have their control panel with respect to the motor rating).All pumps to be provided with separate IP 54 rated variable frequency drives with integrated input disconnect switch. Control panel should also consist of cooling fan.VFD - The variable frequency drive(s) shall be pulse width modulation (PWM) type, microprocessor controlled design. VFD shall be capable of operating in voltage ranges of 240V or 415 V +/- 10% AC, three phase; at frequencies of 48 to 63 Hz. VFD shall be factory fitted and unit mounted.Min. pump efficiency at duty conditions shall be 75% (Minimum ECBC standards or ASHRAE - 90.1 standards):Lot-Expanded polystrene (T.F.Quality) insulations of not less than 75mm thick duly cladded between aluminium sheets of 0.5mm thickness and properly clamped to pump in two semicircular section as per specifications.Lot- Mounting frame work with anti vibration pads.Note- Total Head Loss given is minimum requirement for the system. Actual Head shall be calculated & confirmed by the vender at time of Bidding.200 USGPM , 45 meter head (1w+1s)
2
-
-
... More
Supply, installation, testing, balancing and commissioning of PRESSURISED CHILLED WATER EXPANSION TANK along with necessary accessories such as air vents, Safety Valves, Pressurisation pumps and its panel , with required Support & Foundation etc. in order to keep chilled water system under pressure and to prevent entrapment of air in the system. The tank shall be precharged M.S expansion tank with replaceable heavy duty butyl rubber bladder. The tank shall have 20 mm drain and charging valve connection to facilitate the onsite charging of the tank to meet system requirement. The tank shall be fabricated as per Indian standard code for “non-fired pressure vessels” and the flanges shall be as per IS 6392-1971. For chilled/hot water application, it will be insulated with 50mm thick insulation to the specifications and cladded with 26 G-aluminium cladding. The expansion tank shall be supplied along with pressurization unit. Install Expansion tank in accordance with manufacturer’s written instructions. The drawing, schedules and specification shall be referred. The tank shall be designed to absorb the expansion forces of cooling/heating system water while maintaining proper system pressurization under varying operating conditions. The heavy duty bladder should contain system water thereby eliminating tank corrosion and water logging problems. The system should include airvent and complete as per technical specification. Tank shall be selected for 125 psi.Supply, Installing, Testing and commissioning of The pressurization unit shall consist of two nos. (1 working + 1 stand-by) high pressure pumps of suitable pressure rating mounted on M.S. frame, complete with interconnecting piping, isolation valves, NRV, Y-strainer, pressure gauge, pressure transmitter, auto-logic panel (IP 55) with dry-run protection, electrical MCB and interconnecting wiring. The unit shall be housed in powder-painted canopy suitable for external installation conforming to the specifications. The Pump Shall be BMS Compatible.100 liters
1
-
-
... More
Supply, installation, testing, balancing and commissioning of centrifugal type air separator with required Support & Foundation for design water flow rate with a maximum pressure loss of 1 feet water gauge. The unit shall have Flanged inlet and outlet connections tangential to the vessel shell. Vessel shell diameter to be three times the nominal inlet/outlet pipe diameter. The unit shall have an internal stainless steel air collector tube. Manufacturer to furnish data sheet specifying air collection efficiency and pressure drop at rated flow. The shell shall be fabricated as per IS standrad for “non-fired pressure vessels” and the flanges shall be as per IS 6392-1971.. For chilled water application, it will be insulated with 50 mm thick insulation to the specifications and cladded with 26G-aluminium cladding.. Install Air separator in accordance with manufacturer’s written instructions.
(The Air Separator Size is to be Calculated & validated by the contractor before ordering.)100 NB
1
-
-
... More
Supply , Installation , testing and commissioning of factory built floor mounted Double Skinned hot water Air-handling unit type fabricated out of extruded aluminium section with 0.8 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.8 mm plain Galvanised steel sheet inside with blower , blower section with AMCA certified blower (Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 415 volts ± 10% , 50 Hz ± 5% AC supply , 6 row deep heating coil made of Aluminium finned Copper tube( Tube thickness not less than 0.41 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90%, 3 micron micro vee filter complete with filter section , polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The AHU panels shall be insulated with 46±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across cooling coil shall be limited to 400 FPM maximum. The capacity of Air-handlers shall be as follows:Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding.6000 CFM , 56 kw capacity, 6 R.D heating coil, CS AHU with 60 mm wg
3
-
-
... More
Supply , Installation , testing and commissioning of factory built Double Skinned Air-handling unit Ceiling suspended type fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower with AMCA certified blower , blower section(Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 220 volts ± 10% , 50 Hz ± 5% AC supply, 4 Row deep heating coil and made of Aluminium finned Copper tube( Tube thickness not less than 0.41 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90% , Micro Vee filter upto 3 micron and 99% efficiency, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The AHU panels shall be insulated with 25±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across heating coil shall be limited to 450 FPM maximum. The capacity of Air-handlers shall be as follows:Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding.800 CFM , 5 kw capacity, 4 R.D heating coil, CS AHU with 40 mm wg
4
-
-
... More
Supply , Installation , testing and commissioning of factory built Double Skinned Air-handling unit Ceiling suspended type fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower with AMCA certified blower , blower section(Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 220 volts ± 10% , 50 Hz ± 5% AC supply, 4 Row deep heating coil and made of Aluminium finned Copper tube( Tube thickness not less than 0.41 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90% , Micro Vee filter upto 3 micron and 99% efficiency, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The AHU panels shall be insulated with 25±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across heating coil shall be limited to 450 FPM maximum. The capacity of Air-handlers shall be as follows:Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding.1000 CFM , 7 kw capacity, 4 R.D heating coil, CS AHU with 40 mm wg
1
-
-
... More
Supply , Installation , testing and commissioning of factory built Double Skinned Air-handling unit Ceiling suspended type fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower with AMCA certified blower , blower section(Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 220 volts ± 10% , 50 Hz ± 5% AC supply, 4 Row deep heating coil and made of Aluminium finned Copper tube( Tube thickness not less than 0.41 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90% , Micro Vee filter upto 3 micron and 99% efficiency, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The AHU panels shall be insulated with 25±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across heating coil shall be limited to 450 FPM maximum. The capacity of Air-handlers shall be as follows:Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding.1600 CFM , 10 kw capacity, 4 R.D heating coil, CS AHU with 40 mm wg
1
-
-
... More
Supply , Installation , testing and commissioning of factory built Double Skinned Air-handling unit Ceiling suspended type fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower with AMCA certified blower , blower section(Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 220 volts ± 10% , 50 Hz ± 5% AC supply, 4 Row deep heating coil and made of Aluminium finned Copper tube( Tube thickness not less than 0.41 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90% , Micro Vee filter upto 3 micron and 99% efficiency, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The AHU panels shall be insulated with 25±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across heating coil shall be limited to 450 FPM maximum. The capacity of Air-handlers shall be as follows:Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding.1800 CFM , 11 kw capacity, 4 R.D heating coil , CS AHU with 40 mm wg
1
-
-
... More
Supply , Installation , testing and commissioning of factory built Double Skinned Air-handling unit Ceiling suspended type fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower with AMCA certified blower , blower section(Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 220 volts ± 10% , 50 Hz ± 5% AC supply, 4 Row deep heating coil and made of Aluminium finned Copper tube( Tube thickness not less than 0.41 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90% , Micro Vee filter upto 3 micron and 99% efficiency, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The AHU panels shall be insulated with 25±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across heating coil shall be limited to 450 FPM maximum. The capacity of Air-handlers shall be as follows:Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding1800 CFM , 9.5 kw capacity , 4 R.D heating coil , CS AHU with 40 mm wg
1
-
-
... More
Supply , Installation , testing and commissioning of factory built Double Skinned Air-handling unit Ceiling suspended type fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower with AMCA certified blower , blower section(Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 220 volts ± 10% , 50 Hz ± 5% AC supply, 4 Row deep heating coil and made of Aluminium finned Copper tube( Tube thickness not less than 0.41 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90% , Micro Vee filter upto 3 micron and 99% efficiency, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The AHU panels shall be insulated with 25±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across heating coil shall be limited to 450 FPM maximum. The capacity of Air-handlers shall be as follows:Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding.2600 CFM , 14.5 kw capacity , 4 R.D heating coil , CS AHU with 40 mm wg
1
-
-
... More
Supply , Installation , testing and commissioning of factory fabricated Fan coil unit with 12 mm static pressure each complete with copper pipe connections with brass fittings , wiring with 3 pin socket plug , U-trap in drain pipe connection near FCU , 3 speed switch , fire retardant double canvas connections , 3 row deep hot water coil , three speed motor , washable filters , Stainless steel drain pan insulated with 13 mm aluminium faced nitrile rubber. Fan coil unit shall be suitable for 220 ± 10 volts , 50 Hz cycle single phase power supply , maximum RPM of motor shall be 960. The unit shall be complete with all valve, stainer & other accesssories. 2 kw heating Capacity/500 CFM, 3 row deep heating coil.
3
-
-
... More
Supply, installation, testing and commissioning of Class "B" GI piping with minimum 6 mm nitrile rubber insulation over the pipes,complete with fittings, supports,U trap arrangement,Clean Plug and included accessories for CSU as per specifications, drawings and schedule .25 mm dia
90
-
-
... More
Supply, installation, testing and commissioning of Class "B" GI piping with minimum 6 mm nitrile rubber insulation over the pipes,complete with fittings, supports,U trap arrangement,Clean Plug and included accessories for CSU as per specifications, drawings and schedule 32 mm dia
90
-
-
... More
Supply, installation, testing and commissioning of Class "B" GI piping with minimum 6 mm nitrile rubber insulation over the pipes,complete with fittings, supports,U trap arrangement,Clean Plug and included accessories for CSU as per specifications, drawings and schedule 40 mm dia
90
-
-
... More
Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting for supply & return air with all the accessories and hanging arrangement. It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting . Refer tender specification for detail description 0.63mm thick (24 guage)
800
-
-
... More
Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting for supply & return air with all the accessories and hanging arrangement. It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting . Refer tender specification for detail description 0.80mm thick (22 guage)
1100
-
-
... More
Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting for supply & return air with all the accessories and hanging arrangement. It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting . Refer tender specification for detail description 1.00mm thick (20 guage)
500
-
-
... More
Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting for supply & return air with all the accessories and hanging arrangement. It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting . Refer tender specification for detail description 1.2mm thick (18 guage)
50
-
-
... More
Supplying, installing, testing & commissioning of GI volume control damper with minimum 1.6 mm flange and 1.8 mm blade thickness within ducts to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system as per schedules & drawings.
30
-
-
... More
Supply, installation, testing,balancing and fixing of Powder coated aluminium extruded grill with collar damper for supply air as per specification & the sizes will be as per schedules and drawing.Refer technical specification for detail description
30
-
-
... More
Supply, installation, testing ,balancing and fixing of Powder coated aluminium extruded grill for return air as per specification & the sizes will be as per schedules and drawing.
94
-
-
... More
Supplying, Installing, testing and commissioning of powder coated extruded aluminium exhaust and Fresh air louvers with min. 60 % free area, with metallic frame work & fixing accessories, to be fixed on external wall to exhaust air from building area to ambient , it shall be suitable for exhausting / fresh required air in CFM . Louvers need to be suitable in order avoid rain water entry in to building @ 15 degree deflection with bird screen complete as per specification approved drawings and schedules.
20
-
-
... More
Supplying, Fixing,testing and commissioning of fusible link type fire damper in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be spring return so as to close the damper in the event of smoke. The spring return action shall be inbuilt mechanism and not externally mounted. the damper shall also be closed in the event of fire signal complete as required and as per specifications
11
-
-
... More
Supply,Installation,Testing and commissioning of Thermal insulation material for Duct insulation shall be anti-microbial closed cell cross linked polyethylene foam. Thermal conductivity of the insulation material shall not exceed 0.032 W/moK at an average temperature of 25oC. Density of the material shall be 25-30 Kg/m3. The product shall have temperature range of –40 oC to 105oC. The insulation material shall be fire rated for Class 0 as per BS 476 Part 7, 1987 for surface spread of flame test. Water vapour permeability as per DIN 52615 shall not exceed 0.15ng/Pa.Sec.m. Thermal conductivity of the material shall not be affected by ageing, as per DIN 52616. The material must be tested for ageing effect in an accredited laboratory for a minimum period of five years to satisfy the ageing criteria. The smoke density of the material as per AS-1530.3 shall not exceed 1. There shall be no toxicity in the emitted smoke, both under flaming and non-flaming conditions, as per AITM 3.000 (1993). 19 mm thick
900
-
-
... More
Supply ,Installation,testing and commissioning of duct acoustic lining consist of various thickness resin bonded glass wool of density 48 kg/m3 and covered by 0.46 mm perforated aluminum sheets having 3 mm perforation at 6 mm centre’s. .Refer technical specification for detail description.25 mm thick
120
-
-
... More
Supplying,fixing acoustic lining on wall and ceiling of AHU rooms with 25 mm thick,density 32 kg/cu.m resin bonded glass fibre insulation friction fixed in 610 mm X 610 mm frame work made out of 0.6 mm thick GI Sheet U Shaped channel and covered with reinforced fibre glass tissue and finished with 0.80 mm perforated aluminium sheet etc.complete as per drawings and as per specification50 mm thick
100
-
-
... More
Supply,Installation,testing and commissioning of double Layer canvas connection fire retardant cloth for the end connection of CSU/AIR WASHER and Ventilation fan to reduce the vibration
20
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick.100 mm dia(40 mm insulation)
120
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick.80 mm dia(40 mm insulation)
45
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick.65 mm dia(40mm insulation)
100
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick.50 mm dia(40 mm insulation)65 mm dia(40mm insulation)
150
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick.40 mm dia(40 mm insulation)
180
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick.32mm dia(25 mm insulation)
120
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick.25 mm dia(25 mm insulation)
120
-
-
... More
Supplying, fixing, testing & commissioning of Butterfly Valve for chilled water circulation, with C.I body SS disc nitrile sheet & O- ring & PN-16 pressure rating as specified. All valve shall be insulated with the same material as of pipe insulation material.
-
-
-
... More
100mm dia
2
-
-
... More
80mm dia
2
-
-
... More
65mm dia
4
-
-
... More
50mm dia
8
-
-
... More
40mm dia
8
-
-
... More
32mm dia
8
-
-
... More
25mm dia
8
-
-
... More
Supplying, installing, testing & commissioning of 2 way motorised diverging valve with motor as required. The size of the valves are as follows: 80mm dia
2
-
-
... More
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.All valve shall be insulated with the same material as of pipe insulation material.
-
-
-
... More
100 mm dia
2
-
-
... More
80mm dia
4
-
-
... More
50mm dia
4
-
-
... More
40mm dia
10
-
-
... More
32mm dia
1
-
-
... More
Supplying, fixing, testing & commissioning of Y Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled water circulation as specified
-
-
-
... More
100 mm dia
2
-
-
... More
80 mm dia
4
-
-
... More
40 mm dia
5
-
-
... More
32 mm dia
4
-
-
... More
Supplying , fixing, testing & commissioning Non Return Valve with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN-16 pressure rating for chilled / hot water circulation including insulation as specified.All valve shall be insulated with the same material as of pipe insulation material.
-
-
-
... More
100 mm dia
2
-
-
... More
80 mm dia
2
-
-
... More
Supplying , fixing, testing & commissioning of expansion below of PN-16 pressure rating for chilled / hot water across pump and chiller for resisting the unit vibration to the main pipe Line.
-
-
-
... More
100 mm dia
4
-
-
... More
80 mm dia
4
-
-
... More
Supply, Installation , Testing & Commissioning of Two way Modulating type Pressure Independent Balancing Cum Flow Control Valves Supply , Installation, testing and commissioning of Pressure independent type 2 way Balancing and modulating Control valves in a single Unit of Valve. PN16 Rating. It should be diaphragm type & pressure balancing should be done with Delta P controller only (not cartridge). Pressure Drop across the valve must not exceed 20 kpa up to DN 32 (for CS-AHU) and 30 Kpa in bigger Sizes (for AHUs).DN 15 to DN 32 Brass Body Ext. Threaded DN 40 & DN 50 Cast Iron Body2 , Ext. Threaded AND DN 65 to DN 100 Cast Iron body, Flanged Ends Connection Duly mounted with Modulating actuator IP42/54 Accordingly type suitable for 24V AC. Actuator should be Gear type only (not thermal/wax) & should have the self-calibrating feature.Valve & Actuator combination should be able to give logarithmic control characteristics to achieve linear control.The Valve should be selected to enable lowest possible pressure drop to have benefits of lower recurring Pumping Energy.All Valve shall be capable to communicate with BMS System.As per specifications of following sizes with maximum Flow rate & Min. Pressure Drop :
-
-
-
... More
DN 32mm dia
8
-
-
... More
DN 40 mm dia
1
-
-
... More
DN 50 mm dia
1
-
-
... More
Supplying, installing, testing and commissioning of Auto Air Vent at all high points in the piping system for venting. Valves shall be of double flat type with Brass body, rubber seating etc.
4
-
-
... More
Supply, Installation, Testing , & Commissioning of Brass Ball Valve of 25 mm diameter (Drain) complete with nipples etc. as required and as per specifications.
12
-
-
... More
Supplying, installing, testing and commissioning of pressure gauges, it shall be dial type (100mm) of range 75 mm. Vacuum to 10-kg/cm² pressure for compound gauges at pump suction and 0-10 kg/cm² pressure for normal gauges. Dial to be in white colour and numbers in black and / or red colour. Gauges selected must provide mid-scale readings under normal operating pressures. Gauges shall be liquid filled to dampen pulsation, with bright finished stainless steel ss-304 case, brass movement, bronze bourdon tube, and shall be furnished witha pulsation dampening orifice. Gauges shall have a SS syphon of 19 mm dia and 400mm length both side threaded with SS nut. A ball valve shall be provided at one end for protection of gauge..
13
-
-
... More
Supplying, installing, testing and commissioning of The Thermometer shall be dial type (100 mm) of range 0º C to 50º C/32º F to 120ºF.The body shall be of stainless steel grade SS 304. Thermometer shall be suitable for 12 mm connections with long stem, so that thermometer is removable without damaging the insulation. M.S. socket to be welded on pipes with copper thermo wells for installing thermometers.
11
-
-
... More
Supplying, laying, fixing, testing & commissioning 20X2,MM pipe made up of,(PEX-a) with an oxygen diffusion barrier at a gap of 150MM to the rebars, without any metallic layer in between should be used.It should comply with ENISO 15875 ,for plastic piping system. The pipe should have an additional oxygen barrier layer having Oxygen-tightness in accordance with DIN4726 .The pipe material should be flexible enough to install with minimum bending radiusof 8D(8 times the Diameter) without any tool or bending spring.Pipes cut to required length with necessary, clamps, supports, fittings such as bends, tees, reducers, flanges etc and installed with all joints complete as per specification & diameter mentioned in drawings.This include wire ties to tie the radiant pipe on the rebar & pipe joint coupling of brass suitable for 20 X 2 mm pipeSupply,Installing, testing & commissioning of Modular type brass manifolds for supply and return water, each manifold box shall be with below mentioned connections for radiant circuit with compression fitting. Supply manifold with bayonet connection to have flow meter balancing lockshield valve with mechanical memory and adaptor connections. Return Manifold with Bayonet connection,balancing lockshield valve with mechanical memory and adaptor connection.Supply/ Return isolation valves with Air vent and drain cock on header side,Three way control valve with By pass line on return header complete with On/ Off typeActuator to control the water flow after getting signal from thermostat. Pressure and temperature gauges ( Upto 6 Bar pressure and 10 - 50 Deg C). Manifold Box with front cabinet openable for operation & Maintenance. System Shall be compatible with BMS.
1
-
-
... More
Supplying , installation, testing and commissioning of mentioned capacity & head condensor water pump. The pumps shall be close coupled , single stage , centrifugal , end suction with backpull out design. Hence , the rotating unit can be removed and serviced without disconnecting the suction and discharge piping. The pump and base frame shall be factory assembled at the pump manufacturer’s facility. Installation instructions shall be included with pump at time of shipment. The pump manufacturer shall have complete unit responsibility. The pump shall be balanced statically and dynamically. The pump are constant speed. The noise level shall not exceed 75 dbA at 2 m from the source. The pump shall be required to meet specification mentioned and per drawings and schedules. The Pump Shall be BMS Compatible.End suction split casing type pump.Suitable HP , TEFC squirrel cage induction motor with class 'F' insulations & efficiency class EFF-2 , 1450 rpm synchronous speed , operating on 415 +/-10% volts ,3 phase , 50 Hz A.C.supply.The Pump shall be capablele to communicate effectively with BMS.Mounting frame with Anti vibration pads.Note- Total Head Loss given is minimum requirement for the system. Actual Head shall be calculated & confirmed by the vender at time of Bidding.100 USGPM , 18 meter head (1w+1s)
2
-
-
... More
Supply , installation , testing and commissioning of Fire Rated Tube Axial flow fans complete with tube casing , impeller , bird screen , gravity louvers , necessary nut bolts , Necessary transition piece and canvas connection for proper installation, silencers on inlet and outlet and directly coupled TEFC Sq.cage IP-55, Class-H and IE-3 High efficiency induction motor mounted on vibration isolators suitable for 415V±10% , 50 Hz. 3 phase electric supply complete as per the technical specifications enclosed. The fans shall be AMCA certified. The fan shall be rated for a minimum of 250 Deg C for a minimum of 2 hours application.The fan shall be complete in all respect and should match the specification ,Drawings and Schedule.The unit shall be capacble to communicate with BMS system.For dia upto 1120 fan RPM should be 1450 and above 1120 dia 950 RPMNote:Noise level should be selected for 3 meter distance from fan at room condition.
For normal case - 80db(A)@3m
For Emergency case - 90db(A)@3mAll fan should be factory tested in presence of PMC /consultant/Client representative
-
-
-
... More
10000 CFM (30 mm Static Pressure, Ceiling Mounted) for Basement Exhaust
4
-
-
... More
21000 CFM (20 mm Static Pressure, Ceiling Mounted) for Basement Exhaust
8
-
-
... More
25500 CFM (20 mm Static Pressure, Ceiling Mounted) for Basement Exhaust
2
-
-
... More
Supply , installation , testing and commissioning of Fire Rated Tube Axial flow fans complete with tube casing , impeller , bird screen , gravity louvers , necessary nut bolts , Necessary transition piece and canvas connection for proper installation, silencers on inlet and outlet and directly coupled TEFC Sq.cage IP-55 , Class-H, IE 1 efficiency induction motor mounted on vibration isolators suitable for 415V±10% , 50 Hz. 3 phase electric supply complete as per the technical specifications enclosed. The fans shall be AMCA certified. The fan shall be rated for a minimum of 250 Deg C for a minimum of 2 hours application.The fan shall be complete in all respect and should match the specification ,Drawings and Schedule.The unit shall be capacble to communicate with BMS system.For dia upto 1120 fan RPM should be 1450 and above 1120 dia 950 RPMNote:Noise level should be selected for 3 meter distance from fan at room condition.
For normal case - 80db(A)@3m
For Emergency case - 90db(A)@3mAll fan should be factory tested in presence of PMC /consultant/Client representative7000 CFM (25 mm Static Pressure, Floor Mounted) for Liftlobby Pressurization at Terrace
1
-
-
... More
Supply, installation, testing and commissioning of factory fabricated Single Skinned cabinet type fans section made out of extruded aluminium section with 1.0 mm pre-plasticized / pre-coated Galvanised steel sheet with DIDW blower, blower section and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply with motor and belt drive package. The fan Motor shall be of efficiency class IE3 or EFF1 whichever is more efficient. The blower should be AMCA Certified for air performance and should be selected for maximum efficiency.The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.5 MPS maximum.The unit shall be compatible with BMS System and complete in all respect.
-
-
-
... More
2100 CFM, 20 MM SP
1
-
-
... More
2100 CFM, 20 MM SP
1
-
-
... More
1200 CFM, 20 MM SP
1
-
-
... More
1000 CFM, 20 MM SP
1
-
-
... More
Supply, installation, testing and commissioning of propeller type fan with Al./SS blades and complete with induction Motor suitable for operation with 230 V single phase 50 Hz with suitable frame etc. as per IS:2312-1967 with gravity dampers for exhaust complete as per specifications and drawings.The unit shall be compatible with BMS System and complete in all respect.The quoted price shall consist of mounting arrangemnt for the fan. The maximum sound level of unit shall be 60dB(A) @ 3 m from source.
-
-
-
... More
800 CFM
3
-
-
... More
600 CFM
1
-
-
... More
350 CFM
1
-
-
... More
1200 CFM
1
-
-
... More
200 CFM (With plastic blade)
1
-
-
... More
Supply,installation,testing and commissioning of e-filter advanced air purifiction technology which removs harmful substances like dust particles , allerges, pollen, smoke, bacteria, virus and other airborne particles. The filter should be designed with low pressure drop ad sould have impingement, polarization and agglomeration principles.The e-filter shall be able to remove 97% of airborne particles down to 0.3 microns and greater in recirculating system with the pressure drop loss of not more than 0.2 w.g @ 300 fpm. The thickness of the filter should be 50mm and the performance should be corrospondence to PM2.5 filteration. The filter must be retrofit design should be able to integrate with pre engineered indoor type air handling unit system. The unit should meet the WELL Building standards.The media should be throw away type only. Washable type media will not be accepted due to its low efficiency. It must be applied in line with the manufacturers instructions and guidelines in the finished manner. These filter are to be installed at the suction side of Ductable unit of below mentioned fan capacity for supply of fresh air inside the spacesFor 6000 CFM AHU Unit
2
-
-
... More
Supply,installation,testing and commissioning of glycol generators complete with glycol storage tank, 0.63mm Aluminium cladding shall be provided to the exposed hot water pipes to be installed outside the building and inside plant room. The unit shall be complete with all accessories as required for heating system such as pipes, insulation, electrical panel, cable, termination, cable tray. The unit shall be generate with 50 % extra glycol capacity for stadby purpose.
1
-
-
... More
Design , fabrication, wiring, Supply, Installation, Testing and Commissioning of following Wall mounted / Floor mounted(including base stand), 415V,3PH, 50Hz extensible and fully compartmentalized panels complying to IS 8623/93. The indoor panels shall be IP 42 and outdoor panels shall be IP 54 type. The Panel shall have proper space with required clearance for cables, incoming / outgoing switchgear, CTs, PTs, Ammeter, Voltmeter, selector switches, Insulated and properly supported compartmentalized bus bars with heat shrinkable sleeves along with the other control circuit accessories within the panel and any other electrical component mentioned in the Panel Description.The panel shall be fabricated out of CRCA not less than 2.0 mm thick for load bearing members and 1.6mm for the doors of LT panel. The Panel shall have seven tank pre treatment process comprising of degreasing, rinsing, de-rusting, rinsing, phosphatising, rinsing and passivation followed by powder coat painting having a paint thickness of 60 microns or as specified. The Panel shall be Dust/Vermin poof with earth studs as per the SLD and specifications. All Panels shall be BMS compatible.
The unit shall be complete with all cable accessories required as per specification.
1
-
-
... More
INCOMER
-
-
-
... More
1 No. 500amps 4P MCCB(25KA) with thermal Magnetic release (PRTM) with Class-C transient voltage surge suppression device suitable for 3 phases as per specifications.
-
-
-
... More
METERING & INDICATION for each Incomer
-
-
-
... More
1 set of R,Y,B phase indicating lamps
-
-
-
... More
Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD) with RS-485 Port.
-
-
-
... More
Sets of 500/5A, CL-1, 15VA CTs for measuring.
-
-
-
... More
Sets of phase indicating lamp with 2A control MCBs.
-
-
-
... More
BUS-BAR
-
-
-
... More
500A TPN Aluminium Bus Bar with colour coded PVC Sleeves
-
-
-
... More
OUTGOINGS
-
-
-
... More
3 No. 200amps FP MCCB
-
-
-
... More
3 No. 63amps FP MCB
-
-
-
... More
PANEL AS DESCRIVED ABOVE
-
-
-
... More
3 No. 200amps FP MCCB
-
-
-
... More
3 No. 63amps FP MCB
-
-
-
... More
PANEL AS DESCRIVED ABOVE
-
-
-
... More
STARTER PANEL: Supply, installation testing and commissioning of Direct online starters suitable for motors of air handling units/ Heat recovery wheel/Ventilation fans of below mentioned capacities. The starter shall comprise of all necessary power and control equipments including, Auto / manual selector switch, start / stop push button, LED indication, line contactor, Overload realys, Potential free NO/NC contact for control wiring, 415V actuated relay coil, necessary control wirings properly connected in fully usable state. Minimum utilization catagory for all contactors shall be AC3 and contactor shall be capable to withstand the steady state (full load) and starting inrush current. The starter shall have necessary protection device (MPCB +EOCR) whose settings and ratings shall be as per the type-2 co-ordination chart. The starter shall have inbuilt protection against overcurrent, short circuit and single phasing. All below mentioned starters shall be BMS compatible and additional contacts and wiring required for BMS integration shall be provided.
-
-
-
... More
Supplying & laying of following all cable, cable termination, cable trays and earthing conductor as per SLD and specification.
1
-
-
... More
Supply, installation testing and commissioning of Direct online starters suitable for motors of air handling units/ Heat recovery wheel/Ventilation fans of below mentioned capacities. The starter shall comprise of all necessary power and control equipments including, Auto / manual selector switch, start / stop push button, LED indication, line contactor, Overload realys, Potential free NO/NC contact for control wiring, 415V actuated relay coil, necessary control wirings properly connected in fully usable state. Minimum utilization catagory for all contactors shall be AC3 and contactor shall be capable to withstand the steady state (full load) and starting inrush current. The starter shall have necessary protection device (MPCB +EOCR) whose settings and ratings shall be as per the type-2 co-ordination chart. The starter shall have inbuilt protection against overcurrent, short circuit and single phasing. All below mentioned starters shall be BMS compatible and additional contacts and wiring required for BMS integration shall be provided.
-
-
-
... More
0.75 kW
4
-
-
... More
1.0 kW
1
-
-
... More
1.5 kW
4
-
-
... More
2.0 kW
2
-
-
... More
3.0 kW
2
-
-
... More
5 kW
8
-
-
... More
7.5 kW
2
-
-
... More
FURNITURE
-
-
-
... More
Reception Table Dimension(L) 3300mm X (D) 750mmX (H)750mm (all over ht 1100mm) Supplying, and placing in position of reception Table as per Image/drawing . The table top are made up of 36mm thick pre-laminated particle board and understructure shall be made of 25mm thick prelaminated particle board with 2mm thk pvc edge banding . Modesty & side panel shall be 25mm thk prelam particle board with 2mm thk pvc edge banding . The Table top height will be 750mm from the floor level & side panels height will be 900mm and modesty height will be 1000mm . Also a provision of one additional top at the height of 150 mm above the modesty panel rest on SS stud . overall ht of the table 1100mm. upper table top are made up of 25mm thk prelam particle board with 2mm thk pvc edge banding. upper table top depth will be 300mm .The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of Prelam particle board Mobile pedestal of size 400mm(L)x 450mm(D)x600mm(HT) (2 drawer + 1filling). Pedestal top are made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board with handles and locking arrangement. The front of the table is provisioned with designed wooden panel as per shown in image.All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
1
-
-
... More
Side Storage with reception table Dimension: 900mm(L) X 450mm(D) x 750mm(H)Supplying, and placing in position of medium height storage @ 750mm height as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters with D shape handles & locking arrangement. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specif
1
-
-
... More
Reception ChairSupplying and placing in position of 360 degrees Revolving Medium Back chair of size :- (W)660mm X (D)510mm X (H)1060mm as per image. The backrest is fitted with taut breathable mesh for optimal support with an adjustable lower back support. The seat cushion stays firm on the sleek chrome base with sturdy nylon castors. Upholstered in soft black fabric the seat cushions comfort. Powered by a pneumatic gas lift and tilt tension control the chair offers superb ergonomic support for your body. Mechanism:Tilt Tension Control, Adjustable Armrest..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
1
-
-
... More
Sofa for Reception & waiting room 3 seater Dimension (L)1650mm X (D)750mm X (H)710mm , 2 seater Dimension (L)1390mm X (D) 750mm X (H)870mmSupplying, and placing in position of sofa as per Image.A supple premium Leatherette upholstery adds class to the soft cushioned backrest and seating. Sitting proudly on sleek steel legs the sofa exudes a sense of comfort that is perfect for any space. Material & subtype:Premium Leatherette, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharg
1
-
-
... More
Side Table for Reception & waiting room, Dimension(L)680mm X (W)530mm
X (H)460mmSupplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood ( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy, Style:Contemporary. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharg
2
-
-
... More
Main Table for Office, Main Table Dimension (L)1800mm X (D) 900mm X (H)750mm, Side Runer Dimension (L)1050mm X (D) 450mm X (H) 750mm Supplying, and placing in position of main Table as per Image/ drawing.The Table top made out of 32mm thk prelam particle board with 2mm thk pvc edge banding & side panel & modesty panel made up of 25mm thick pre-laminated particle board .The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-600mm) attached to the table top. Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of handles & central Locking arrangement. The table have a provision of free standing Side Storage of size 1050mm L x 450mm D x 750mm Ht., Storage Top made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Storage having a provision of 3 drawer unit, one openable shutter with D shape handle & central locking arrangement, one open storage with shelf in it . The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge
2
-
-
... More
Main Chair for Office Supplying and placing in position of 360 degrees Revolving high Back chair of size :- (W)482mm X (D)495mm X (H)1255mmas per image. The backrest is fitted with taut breathable mesh for optimal support with an adjustable lower back support. The seat cushion stays firm on the sleek chrome base with sturdy nylon castors. Upholstered in soft black fabric the seat cushions comfort. Powered by a pneumatic gas lift and tilt tension control the chair offers superb ergonomic support for your body. Mechanism:Tilt Tension Control, Adjustable Armrest with headrest..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
2
-
-
... More
Visitor Chair for OfficeSupplying and placing in position of 360 degrees Revolving Medium Back chair of size :- (W)660mm X (D)510mm X (H)1060mm as per image. The backrest is fitted with taut breathable mesh for optimal support with an adjustable lower back support. The seat cushion stays firm on the sleek chrome base with sturdy nylon castors. Upholstered in soft black fabric the seat cushions comfort. Powered by a pneumatic gas lift and tilt tension control the chair offers superb ergonomic support for your body. Mechanism:Tilt Tension Control, Adjustable Armrest..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
4
-
-
... More
Sofa for Office (2 seater), 2 seater Dimension (L)1410mm X (D)890mm X (H)870mm Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves. The Sofa stands Firm on solid PVC legs with thick armrests that are slightly curved on the front face of the sofa. Each curve defines a seating space which provides for people to be seated comfortably. Finished in a Brown Nappa Aire Leather, the sofa makes a fantastic first impression. The Cushioning is molded such that it flows along the partition for a clean unified look. steam beech solid wood have used for framing construction of sofa. The seat cushion is made of multi layered foam of density 35-38kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specificat
4
-
-
... More
Side Table for Office /Waiting area, Dimension(L)680mm X (W)530mm
X (H)460mm Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood ( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy, Style:Contemporary. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge
2
-
-
... More
Linear Workstation for Sports Departments Offices, Dimension : 900mm(L) X 600mm(D) X 1050mm(H).Supplying and placing in position of Linear Workstation as per photograph/drawing. The modular workstation shall be made out of 25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS powder coated C- shaped leg of size 50mm x 50mm thickness with connectors of size 40mm x 40mm. Provision of 18mm thick Soft board panel above the table top with MS powder coated holders. Provision of Junction box & wire raceway for wire passing. The workstation shall be provisioned with sharing Pedestal Unit of size:- L-400mm x D-450mm x H-600mm with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of D shape handles & Locking arrangement. Provision of one PVC keyboard tray and CPU trolley for each seating. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
10
-
-
... More
Workstation Chair for Sports Departments Office, Supplying and placing in position of 360 degree Revolving medium back chair of Dimension (W)585mm X (D)660mm X (H)1060mm as per image . Ergonomically designed, it features a breathable mesh backrest and adjustable lumbar support to provide you all-day comfort. it offers Synchro Single Locking Mechanism along with a Tilt Tension Control. The adjustable armrest provide deluxe comfort while the strong chrome base . The 55mm castor wheels and a 360-degree swivel provide swift yet stable movement.High-quality fabric upholstery with high abrasion-resistance and superior tear strength & colourfastness,Premium high-density virgin foam for comfortable seating, High stability chair with no-tip over, clearing drop test of 102kgs,Adjustable Lumbar Support for superior back support,Pneumatic Height Lift with Class IV gas lift,Adjustable headrest with Synchro Single Locking and Tilt tension control for improved mobility. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
10
-
-
... More
Main Table for Coach Room,Main Table Dimension : 1500mm(L) X 600mm(D) X 750mm(H), Overall Side Unit Dimension : 1500mm(L) X 450mm(D) x 750mm(H),Supplying, and placing in position of main Table as per drawing/image. Modular tables of size 1500mm(L) x 600mm(D) x 750mm(H). The Table top are made out of 25mm thk prelam particle board with 2mm thk pvc edge banding . The side panel & modesty panel are made up of 18mm thick pre-laminated particle board .The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The table have a provision of Side Storage of size 900mm L x 450mm D x 750mm Ht., Storage Top are made out of 25mm thick pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Side Storage having a provision of 3 drawer unit of size: 400mm(L) x 450mm(D) x 675mm(H) attached to the side storage top with the help of shiny metal rods. Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of central Locking arrangement. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
4
-
-
... More
Main Chair for Coach Room,Supplying and placing in position of 360 degrees Revolving high Back chair of size :- (W)660mm X (D)490mm X (H)1315mmas per image. The chair have Mesh back with Adjustable Lumbar Support. The breathable mesh back chair with cushioned fabric seat with moulded foam shall be ergonomically design with Adjustable lumbar back support .Function: Synchro Single Locking Mechanism.Adjustable Armrest (Up-Down), Adjustable Headrest(Can Adjust Movement).Sitting on a vaulted chrome base the chair is powered by Nylon Castors. Maximum Seating Height :560mm.The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
4
-
-
... More
Visitor Chair for Coach Room,supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support . The chair shall be provisioned with adjustable armrest with PP padding.. The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon castors..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
8
-
-
... More
Lockers for Coach Room,Providing and placing a 2 Drawer personal locker in perfectly upright and straight position. The overall size of the personal locker is 380(w) x 450 (d) x 1830(ht)mm. The personal locker shall have 2 nos. of doors. It shall be (like top, side, back, door, shelf etc.) made of 0.8mm thickness high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. The main frame and base shall be semi welded and folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity of each shelf shall be 40 Kg. The door shall be operated with aesthetically appealing snap fit ABS plastic handle and concealed crank hinge. Adjustable leveler shall be provided with metal insert to resist scratches on the floor and also level & support structure. The structure shall be supplied duly powder coated with 40-50 microns with 7 tank pre-treatment process. Locker shall have individual locking arrangement. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
4
-
-
... More
MP Hall Chair, Supplying, and placing in position of MP Hall chair Model S 204 Floor Mounted - 490 mm CTC
114
-
-
... More
FIRE FIGHTING WORKS WORKS
-
-
-
... More
PUMPS: 1.NOC from fire authority shall be in the scope of Contractor . Only fee paid to the fire authority shall be reimbursed against the submission of the receipt and nothing shall be paid extra. 2. All the Fire Fighting works shall be done in compliance of Fire Fighting authority requirement.Pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65 % of rated head. The shut off head shall not exceed 120% of rated head. Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered with anti vibration pads.2280 lpm at 70 m Head Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.
2
-
-
... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered with anti vibration pads.2280 lpm at 70 m HeadNote: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.
1
-
-
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump).Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads 180 lpm at 70 m Head (For Hydrant ).
2
-
-
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520.Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.Suitable cement concrete foundation duly plastered and with anti vibration pads.450 lpm at 35 m Head (1W+1S)
2
-
-
... More
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
Incomings
400A, 50kA 4 Pole MCCB, Ics=100% Icu rating
Digital Voltmeter 0-500V with selector switch
Ammeter (0-400 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 500A
Outgoings
( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
Main Fire Pump
200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 2 Set
Jockey Pump
100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Diesel Engine Control
Control for diesel engine comprising -
Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode
Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication
Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter
All standard relays and accessories for automatic operation of diesel engine
System Controller
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.
1
-
-
... More
Supplying,Installation,testing & commissioning of dust & vermin proof double door with canopy type taperd roof wall / floor mounted compartmentlised feeder piller type cubical control Panel for fire fighting terrace pump of front area not less than 1.0 Sqmtr. and depth not less than 300 mm, made out of 2mm thick CRCA sheet with 100 Amp. 4 strip aluminium bus bars with front openable door & locking arrangement, interconnection, control wiring, intrigation with pressure switch i/c suppying & fixing following switchgears & control gears/starters etc. as required.
Incomming
100 Amps. 16ka breaking capacity 4 pole MCCB-1 Nos.
Voltmeter (0-500 Volt) with selector switch.-1 Nos.
Ammeter (0-100 Amps.) with selector switch -1 Nos.
Set of 3 phase indication lamp-1 Set
100 Amps. 4 strip insulated bus bars-1 Nos.
Outgoing 63 Amps. 10ka breaking capacity 3 pole MCCB--2 Nos.
Ammeter (0-60 Amps.) with selector switch-2 Nos.
Suitable HP fully automatic Star/Delta Starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation.- 2 Set
Selector switch for local/remote, auto/manual/off operation ON/OFF indication etc.- 2 Set
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. It should be complete as per specifications & directions of Engineer-in-charge.
-
-
-
... More
4 x 25 sqmm ( 28 mm )
3
-
-
... More
3.5 x 50 sqmm ( 35 mm )
4
-
-
... More
3 X 10 sq. mm (22mm)
4
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.150 mm width x 50mm depth x 1.6 mm thickness.
20
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
4
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
20
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
40
-
-
... More
Providing, fixing, tetsing & commissioning of annunciator panel for flow control switches, providing audio /visual indication of actuation of automatic sprinkler system for each zone complete as per specifications. The panel should have interface for connection to complete controlled building management system. The panel should have:-
a) Fault indication for each zone
b) Indication of zone fire
c) Fire/Fault hooter
d) Alarm Panel for fire/fault
e) Battery for emergency
f) Battery Charger
g) mains supply and shall cater for minimum 3 zones working and 1 zones spare
1
-
-
... More
Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor armoured UG cable of 1.1 KV grade Conforming to IS 7098/1988 with upto date ammendment of following size in the existing RCC/HUME/ METAL /GI /CI /Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred.
-
-
-
... More
4 core, 25 sq.mm. Aluminium Armoured
20
-
-
... More
3.5 core, 50 sq.mm. Aluminium Armoured
35
-
-
... More
3 core, 10 sq.mm. Aluminium Armoured
10
-
-
... More
Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 : 2006. It should be complete as per specifications & directions of Engineer-in-charge
5
-
-
... More
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 :Up to 600 mm dia
15
-
-
... More
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber
gasket :
-
-
-
... More
100 mm dia pipes
5
-
-
... More
150 mm dia pipes
28
-
-
... More
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :
-
-
-
... More
100 mm dia Ductile Iron Double Flanged
10
-
-
... More
150 mm dia Ductile Iron Double Flanged
56
-
-
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground )
-
-
-
... More
150 mm. Dia
50
-
-
... More
100 mm. Dia
20
-
-
... More
80 mm. Dia
30
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor)
-
-
-
... More
25 mm dia
180
-
-
... More
32 mm dia
45
-
-
... More
40 mm dia
45
-
-
... More
50 mm dia
15
-
-
... More
65 mm dia
75
-
-
... More
80 mm dia
35
-
-
... More
100 mm dia
25
-
-
... More
150 mm dia
85
-
-
... More
200 mm dia (wall thickness 6.3 mm)
25
-
-
... More
250 mm dia (wall thickness 6.3 mm)
25
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel
25
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
50mm dia
10
-
-
... More
65mm dia
2
-
-
... More
80 mm dia
2
-
-
... More
100 mm dia
5
-
-
... More
150 mm dia
8
-
-
... More
200 mm dia
1
-
-
... More
250 mm dia
1
-
-
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
10
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
-
-
-
... More
65 mm dia
2
-
-
... More
80 mm dia
2
-
-
... More
100 mm dia
2
-
-
... More
150 mm dia
2
-
-
... More
250 mm dia
2
-
-
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia
1
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304)
50
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.40 m
25
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304)
25
-
-
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2 way-100 mm dia M.S. Pipe. (FOR UG TANK)
2
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
3
-
-
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :Pendent Sprinkler
72
-
-
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :Upright Sprinkler
72
-
-
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
14
-
-
... More
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.150mm dia
10
-
-
... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :
-
-
-
... More
80mm dia
2
-
-
... More
100mm dia
2
-
-
... More
150mm dia
2
-
-
... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.
-
-
-
... More
700 mm
35
-
-
... More
1000 mm
45
-
-
... More
Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
72
-
-
... More
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
35
-
-
... More
Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete.
25
-
-
... More
Providing & Fixing of MS door made up of 16 gauge MS Sheet capable of accommodating fire hose reel, landing valve, hose pipes, fittings, 1 No. CO2 & 1 No. Dry podwer type portable fire extinguishers & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with one coat of primer & two coat of finished stove enamelled post office red colour paint & "FIRE HOSE" written on front.
(Approx. size of door: 2100 mm HEIGHT, WIDTH OF DOOR AS PER SHAFT SIZE )
25
-
-
... More
Providing and fixing hose cabinet of size 750mmX600X250mm made of 16 gause thick MS sheet with 4 mm thick float glass doors in front painted "FIRE" in red paint i/c recessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15 mtr. long hose pipe. 1 no. brach pipe mounted on wall or raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant. as directed by Engineer-in-Charge.
2
-
-
... More
Pressure Vessel
Supplying, installing, testing and commissioning of pressure vessel for pressurization of fire system complete with valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, outside with one coat of primer & two coats of synthetic enamel paint of approved shade complete as required to operate commonly main fire pump, sprinkler pump & jockey pump at drop of pressure, automatically at required pressure setting. Complete as per manufacturer's specifications & as directed by Engineer- in-charge.
working pressure:- 11 kg/sqcm
test pressure: 20 kg/sqcm
(450 mm dia & 2000 mm height)
1
-
-
... More
Providing, Fixing, testing and commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 11 Kg/cm2 and test pressure 16 Kg/cm2 to provide relief from stresses at pipe flanges.
-
-
-
... More
150 mm dia
8
-
-
... More
80 mm dia
6
-
-
... More
Providing, Fixing, testing and commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 11 Kg/cm2 and test pressure 16 Kg/cm2 to provide relief from stresses at pipe flanges.
-
-
-
... More
Supply, fixing, testing and commissioning of screwed type brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 & spindle AISI 410) with setting & gland of superior quality having minimum working pressure of 16 kg/sqcm.25 mm Dia
2
-
-
... More
Providing and fixing 25 mm dia inspection & testing assembly with gun metal ball valve, gun metal sight glass ,Reducer ,union, G.I PIPE. connection o drain pipe/riser.
1
-
-
... More
Providing & fixing cast iron 100 mm dia. Foot valve with nuts, bolts, 1.5 mm thick CAF gasket complete with all accessories (To be provided into UG Fire Water Tanks).
1
-
-
... More
Supply and fixing of 4 Nos G.I round bottom FIRE BUCKET of 9 LTR. Capacity field with sand including proper supporting /mounting arrangement MS Angle Iron Frame painted by fire red colour over 2 coats of red oxide paint and written with white paint FIRE complete in all respects as per direction of Engineer Incharge .
6
-
-
... More
Providing, fixing water flow meter on test line complete with all accessories for flow indication , monitoring & testing of fire pumps with bypass arrangment including piping & bypass valves.150 mm dia
1
-
-
... More
Supplying and installing of SMC panel tank confirming to IS:14399 (part 1 & 2):1996 in made up from hot press sheet moulding compound (SMC) panels 1mX1m, 1mX 1.5m, 1mX2m size panels should have extra strength and 90 deg flanges pre drilled for bolting size M12. The panels with hot dip galvanised steel nut-bolt and washer, special sealant having excellent un resistance.The tank have complete accessories with top covered construction having manhole with lockable lid 700mm dia. convex shape drain panel, 100mm dia. air vent with mosquote proof mesh, FRP internal ladder with complete fixing arrangement and GI ladder with fixing arrangement. The external reinforcement of C channels at every 1m with external top tie rods with double coat of painted.cap.5000 liter (OHT)
2
-
-
... More
Supplying and installing of SMC panel tank confirming to IS:14399 (part 1 & 2):1996 in made up from hot press sheet moulding compound (SMC) panels 1mX1m, 1mX 1.5m, 1mX2m size panels should have extra strength and 90 deg flanges pre drilled for bolting size M12. The panels with hot dip galvanised steel nut-bolt and washer, special sealant having excellent un resistance.The tank have complete accessories with top covered construction having manhole with lockable lid 700mm dia. convex shape drain panel, 100mm dia. air vent with mosquote proof mesh, FRP internal ladder with complete fixing arrangement and GI ladder with fixing arrangement. The external reinforcement of C channels at every 1m with external top tie rods with double coat of painted.cap.10000 liter (UGT)
2
-
-
... More
Providing and fixing of external thermal insulation and composite system with First layer of self-extinguishing type Expanded Polystyrene (EPS) insulation boards of 120 mm thick ( max 1mX0.5m section), confirming to IS 4671:1984, having thermal conductivity of 0.034 W/mK, (measured as per IS 3346-1980), density of 20-24 kg/m³ measured as per IS 5688-1982, Fire retardant property selfextinguishing type as per EN 13501-1, bonded with special polymermodified cementitious adhesive confirming to EOTA ETAG 004 (European Technical Approval) formulated to bond polystyrene insulation boards to typical mineral substrate (according to ETAG 004) and Polypropylene mechanical fasteners with plastic pin confirming to EOTA ETAG 014 (European Technical Approval) having dia 10mm & L=200mm on finished level wall and the junction between two adjacent EPS boards to be sealed with low expansion moisture cure Polyurethane Foam. Second layer consists of Fiberglass mesh covered with alkali-resistant coating, mass per unit area ?145 gm/m², mesh size: 3.9x4.0 mm ±10% embedded in special polymer modified cementitious Base Coat with hydrophobes and the corners will be protected with Corner-beads with alkali-resistant mesh wings at least 10 cm wide, mesh mass per unit area min 145 gm/m². Thesurface will be levelled, finished, made smooth complete in all respect as per manufactures specification and as per directions of Engineerin-Charge.
45
-
-
... More
Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described:Concealed work, including cutting chases and making good the walls etc.Providing and fixing of 4.5 Kg. carbon-di-oxide type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase ingernal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming ro IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with internal charge.
10
-
-
... More
Providing and fixing 6.0 Kg. ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with inernal charge.
8
-
-
... More
Providing and fixing 9.0 Kg. ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with inernal charge.
1
-
-
... More
Providing, fixing, testing and commissioning of 50 Litres (trolley mounted) Mechanical Foam type Fire Extinguisher. HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and confoming to IS:13386 .
1
-
-
... More
Providing, fixing, testing and commissioning of CO2 type Fire Extinguisher of capacity 22.5 kg filled with Co2 Gas as per IS 15222 with controll discharge mechanism fitted with Hose, Horn & TROLLEY confirms to IS 2878 bearing ISI mark. Co2 Cylinder as per IS 7285.
1
-
-
... More
Providing and fixing 2 kg capacity clean agent-HFC 236FA Stored Pressure type fire extinguisher ISI marked under IS:15683 complete with imported Novec 1230 manufactured by 3M, with Zero Ozone Depeltion Potential and Very Low Global Warming Potential of 1 with 20 Years Blue Sky Warantee against any regulatory Bans and Restrictions.
2
-
-
... More
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc.
210
-
-
... More
Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based Novec 1230 Clean Agent System for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components:2kg capacity Novec 1230 Clean Agent , DLP Assembly with automatic valve, push in connector for tube, Novec 1230 Clean Agent , mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.
2
-
-
... More
Linear pneumatic heat Detection Tube with all necessary fittings & supports.
200
-
-
... More
Master Control Unit with Audio Visual Alarm with wiring to make complete system operational. The Control Panel should have provision for integration with Fire Alarm/SCADA/BMS System.
1
-
-
... More
1 X 180 Itr completele CCOE approved high pressure seamless BIS 7285 approved Cylinders having 180 ltr capacity, UL/FM approved based Novec 1230 manufactured by 3M based clean agent 70bar pressurized system with PESO approved valve assembly . The system also to be fitted with low pressure supervisory switch for monitoring cylinder with safety burst disc safety cap, elbow and other accessories, mounting bracket, container straps, NRV , electrically operated control head which shall allow for electrical signal actuation of gas , manually operated actuator to actuate the gas flooding process with the help of a lever, flexible rubber hose with wire bralded enforcment to route the gas from the storage cyinder to the discharge piping, to be connected to the discharge outlet of gas cylinder valve & to be terminated at the system piping or discharge manifold, discharge pipoing & nozzle complete as required. Each cylinder must be fitted with digital pressure gauge to monitor pressure and temperature of cylinder at any given point to measure and view the data remotely through an online dash board or mobile application using gateways, iot (internet of things), or sim technology. The system should be capable of giving earlier warning for low pressure in a container and micro leak detection analysis and notification. The electric actuator shall be available with indicator so that on removal of electric actuator from the agent storage container discharge valve there shall be audio & visual notification. Designated to provide proper flow rate & distribution Novec 1230 gas to flood the hazard area as per latest NFPA 2001 . filling facility shall be in India and shall be UL approved.The complete gas suppression system shall be UL/FM approved. As system is UL/FM approved , the software for calculation used to be UL/FM approved. A part from Gas Suppression unit system shall consisit of Gas release panel , abort switch, Manual release switch inorder to integrate it with main fire alarm System
1
-
-
... More
PLUMBING WORKS
-
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade
1.88
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter
110
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single Push Fit Couple
-
-
-
... More
110 mm dia
37
-
-
... More
110x110x110 mm
5
-
-
... More
Plain bend 87.5 deg110 mm dia
3
-
-
... More
Shoe (Plain) 110 mm dia
6
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm dia
55
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
4
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked black solid plastic seat and lid
4
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern
4
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
7
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
7
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
4
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
14
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm
7
-
-
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
2
-
-
... More
Providing & fixing toilet paper holder,C.P. brass
4
-
-
... More
Providing and fixing soil waste and vent pipes 100 mm dia.Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
80
-
-
... More
Providing and fixing M.S. holder-bat clamps of approved design to sand cast iron/ centrifugally cast iron(spun) pipes embedded in and including cement concrete blocks 10x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls, etc.For 100mm dia pipe
8
-
-
... More
Providing and fixing bend of required degree with access door insertion rubber washer 3mm thick, bolts and nuts complete.100 mm diaHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
10
-
-
... More
Providing and fixing plain bend of required degree:100 mm diaHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
16
-
-
... More
Providing and fixing double equal plain junction of required degree.100 x 100 x 100 x 100mm Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905.
8
-
-
... More
Providing and fixing single equal plain junction of required degree.100 x 100 x 100mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
16
-
-
... More
Providing and fixing terminal guard100 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
15
-
-
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe 100 mmSS 304 grade coupling with EPDM rubber gasket
160
-
-
... More
Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipe of diameter:100mm
3
-
-
... More
Providing and fixing trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent, arm complete, including cost of cutting and making good the walls and floors.100mm inlet and 100mm outlet Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
10
-
-
... More
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.
-
-
-
... More
Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe)
12
-
-
... More
Total bracket length 810 mm of approved shape and design (for two 100 mm dia pipes)
10
-
-
... More
Total bracket length 1040 mm of approved shape and design (for three 100 mm dia pipes)
10
-
-
... More
Providing & fixing Nickel Chromium Plated liquid soap dispenser with metallic bottle of approved brand & make 112 mm distance from wall of standard shape with bracket (Nickel chromium plating should pass Salt Spray Test for 200 hours) of the same materials with snap fittings of approved quality and colour, complete as per direction of Engineer in Charge. .
3
-
-
... More
Providing, Fixing of CP brass Towel Ring with CP brass wall brackets and providing & fixing CP brass screws complete as required.
3
-
-
... More
Providing, Fixing of CP brass Towel Rail 600mm long without hanger with 3 hooks and CP brass screws complete as required.
2
-
-
... More
Providing & fixing soap dish holder of approved design.
2
-
-
... More
Providing,Fixing wall mounted of approved make Double Coat hook on door complete.
4
-
-
... More
Providing and fixing CP brass 2 Way Bib cock with wall flange with flow restrictor with flow rate 2.5 litre per minute at 3 bar.
4
-
-
... More
Providibng and fixing straight type approved make single body push fit type WC pan connector with factory supplied spring loaded seal guard of approved make with integral single mould sealing fins made of flexible EVA body, including bush/adaptor for use with C.I. Pipe as supplied with the pan connector.
4
-
-
... More
Providing & fixing 100mm x 50mm G.I. waste with reducing elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to GI / CI waste pipe.
10
-
-
... More
Providing and fixing cast brass Floor cleanout plug with suitable insert keys for opening in brass cap, male threaded joint/reducer with G.I. socket caulked to Pipe/fittings of CI pipe including cost of lead joints etc. complete in all respect.100 mm dia
6
-
-
... More
Providing and fixing GI inlet fitting with maximum 3 inlets 32,40 or 50 mm size fabricated from 100 dia GI pipes and sockets,fixed to C.I. trap with Drip Seal joint and set in cement concrete as per standard drawing complete as directed by Engineer-incharge.
10
-
-
... More
Providing and fixing SS Grating of 125 mm dia of approved quality and colour complete as per direction of engineer in charge. Circular Type125 mm nominal dia with 25 mm waste hole
10
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on Wall
-
-
-
... More
15 mm nominal dia Pipes
110
-
-
... More
20 mm nominal dia Pipes
25
-
-
... More
25 mm nominal dia Pipes
22
-
-
... More
32 mm nominal dia Pipes
20
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal dia Pipes
150
-
-
... More
20 mm nominal dia Pipes
10
-
-
... More
25 mm nominal dia Pipes
10
-
-
... More
32 mm nominal dia Pipes
10
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External Work
-
-
-
... More
15 mm nominal dia Pipes
10
-
-
... More
20 mm nominal dia Pipes
10
-
-
... More
25 mm nominal dia Pipes
10
-
-
... More
32 mm nominal dia Pipes
20
-
-
... More
40 mm nominal dia Pipes
40
-
-
... More
50 mm nominal dia Pipes
10
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
i/c cutting and making good the walls etc.:
-
-
-
... More
32 mm dia nominal bore
10
-
-
... More
40 mm dia nominal bore
5
-
-
... More
50 mm dia nominal bore
10
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
20mm nominal bore
1
-
-
... More
25mm nominal bore
1
-
-
... More
32mm nominal bore
2
-
-
... More
40mm nominal bore
1
-
-
... More
50mm nominal bore
2
-
-
... More
65mm nominal bore
2
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
20 mm nominal bore
1
-
-
... More
25mm nominal bore
1
-
-
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end)
-
-
-
... More
25 mm nominal bore
2
-
-
... More
32 mm nominal bore
5
-
-
... More
40 mm nominal bore
3
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore
30
-
-
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S (non modular) bricks of class designation 7.5
1
-
-
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S (non modular) bricks of class designation 7.5
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S (non modular) bricks of class designation 7.5
5
-
-
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
... More
32mm diameter pipe
10
-
-
... More
40mm diameter pipe
5
-
-
... More
50mm diameter pipe
10
-
-
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work
-
-
-
... More
25mm diameter pipe
2
-
-
... More
32mm diameter pipe
12
-
-
... More
40mm diameter pipe
6
-
-
... More
50 mm diameter pipe
12
-
-
... More
65 mm diameter pipe
10
-
-
... More
80 mm diameter pipe
10
-
-
... More
100 mm diameter pipe
15
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
... More
15 mm nominal bore
20
-
-
... More
20 mm nominal bore
15
-
-
... More
25 mm nominal bore
7
-
-
... More
32 mm nominal bore
7
-
-
... More
40 mm nominal bore
2
-
-
... More
50 mm nominal bore
2
-
-
... More
Supplying and installing of SMC panel tank confirming to IS:14399 (part 1 & 2):1996 in made up from hot press sheet moulding compound (SMC) panels 1mX1m, 1mX 1.5m, 1mX2m size panels should have extra strength and 90 deg flanges pre drilled for bolting size M12. The panels with hot dip galvanised steel nut-bolt and washer, special sealant having excellent un resistance.The tank have complete accessories with top covered construction having manhole with lockable lid 700mm dia. convex shape drain panel, 100mm dia. air vent with mosquote proof mesh, FRP internal ladder with complete fixing arrangement and GI ladder with fixing arrangement. The external reinforcement of C channels at every 1m with external top tie rods with double coat of painted.
-
-
-
... More
cap.12000 liter (UGT)
2
-
-
... More
cap.12000 liter (OHT)
2
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15mm nominal bore
14
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore
2
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixture and geyser points of approved quality confirming to IS: 8931.
6
-
-
... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :50 mm dia
2
-
-
... More
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) :100 mm dia nominal bore
1
-
-
... More
Providing & fixing CI `Y' Strainer (screwed/ flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required.65mm nominal bore
2
-
-
... More
Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Location: Underground / Overhead Tanks.)
-
-
-
... More
25mm dia pipe, 600mm long with size of 250x250x6 mm MS plate
2
-
-
... More
32mm dia pipe, 600mm long with size of 250x250x6 mm MS plate
2
-
-
... More
40mm dia pipe, 600mm long with size of 300x300x6 mm MS plate
6
-
-
... More
50mm dia pipe, 600mm long with size of 350x350x6 mm MS plate
4
-
-
... More
65mm dia pipe, 600mm long with size of 350x350x6 mm MS plate
2
-
-
... More
80mm dia pipe, 600mm long with size of 400x400x6 mm MS plate
2
-
-
... More
Providing & fixing water storage cooler of approved make and brand with SS body Complete in respects-230V Single Phase. minimum flow rate of 40 ltrs. Per hour and storage capacity 80 ltrs.
1
-
-
... More
Supplying and fixing in position of approved quality Solenoid Valve with by-pass arrangement, isolation cock etc. complete with all required accessories such as level sensor, level indicator, level controller and required cabling for the same.
-
-
-
... More
32mm dia
1
-
-
... More
40 mm dia
1
-
-
... More
Providing and fixing water meter with direct reading dial in "KL" with all internal parts in gunmetal , strainer, flanged distance piece for easy removal in future, 100 mm dia Bourden type pressure guage and isolation cock including necessary test certificate for the meter. (For water supply metering from source).40 mm dia
2
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round HDPE pipes/ RCC pies/S.W. pipes including bed concrete as per standard design:
-
-
-
... More
150 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
120
-
-
... More
200 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
50
-
-
... More
250 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
300
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round HDPE pipes/ RCC pies/S.W. pipes including bed concrete as per standard design:
-
-
-
... More
150 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
10
-
-
... More
200 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
10
-
-
... More
250 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
10
-
-
... More
300 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
10
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :180 x 150mm size P-type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
150mm dia RCC pipe
110
-
-
... More
250mm dia RCC pipe
45
-
-
... More
300mm dia RCC pipe
300
-
-
... More
Providing and fixing of external thermal insulation and composite system with First layer of self-extinguishing type Expanded Polystyrene (EPS) insulation boards of 120 mm thick ( max 1mX0.5m section), confirming to IS 4671:1984, having thermal conductivity of 0.034 W/mK, (measured as per IS 3346-1980), density of 20-24 kg/m³ measured as per IS 5688-1982, Fire retardant property selfextinguishing type as per EN 13501-1, bonded with special polymermodified cementitious adhesive confirming to EOTA ETAG 004 (European Technical Approval) formulated to bond polystyrene insulation boards to typical mineral substrate (according to ETAG 004) and Polypropylene mechanical fasteners with plastic pin confirming to EOTA ETAG 014 (European Technical Approval) having dia 10mm & L=200mm on finished level wall and the junction between two adjacent EPS boards to be sealed with low expansion moisture cure Polyurethane Foam. Second layer consists of Fiberglass mesh covered with alkali-resistant coating, mass per unit area ?145 gm/m², mesh size: 3.9x4.0 mm ±10% embedded in special polymer modified cementitious Base Coat with hydrophobes and the corners will be protected with Corner-beads with alkali-resistant mesh wings at least 10 cm wide, mesh mass per unit area min 145 gm/m². Thesurface will be levelled, finished, made smooth complete in all respect as per manufactures specification and as per directions of Engineerin-Charge.
200
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class designation 7.5With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
-
... More
Extra for depth for manholes:Size 90 x 80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
60
-
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality HD - 20Circular shape 560 mm internal diameter
5
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
... More
For pipes 100 to 250 mm diameter
1
-
-
... More
For pipes 350 to 450 mm diameter
1
-
-
... More
Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm precast RCC horizontal grating with frame complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Providing and fixing F.R.P. Grating drain cover M.S. Angle ( 35 x35 x 5 mm). ( Load Bearing cap. 5 T, suitable for car parking, basement, Pump room, Parking Area ).377mm wide and 30mm thick
2
-
-
... More
Excavating trenches of required width for pipe, cables etc including excavation for sockets ,& dressing of sides ,ramming of bottoms ,depth upto 1.5m including getting out the excavated soil,& then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m.All kinds of soil.Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia
100
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets,depth upto 1.5 m, including getting out the excavated matterials, returning the soil as requred in layers not exceeding 20 cm in depth including consolidating each deposited layers by by ramming, watering,etc. and stacking serviceable material for measurements and disposal of unserviceable matterial for measurement and disposal of unserviceable matterial as directed within a lead of 50m:Ordinary rockPipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
300
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets,depth upto 1.5 m, including getting out the excavated matterials, returning the soil as requred in layers not exceeding 20 cm in depth including consolidating each deposited layers by by ramming, watering,etc. and stacking serviceable material for measurements and disposal of unserviceable matterial for measurement and disposal of unserviceable matterial as directed within a lead of 50m:Hard rock (requiring blasting)Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
50
-
-
... More
Earth Work in excavation by mechanical means (Hydraulic / excavator ) manual means over area (exceeding 30 cm in depth ,1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed as engineer incharge.:
-
-
-
... More
Ordinary Rock
50
-
-
... More
Hard Rock(requiring blasting)
300
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :"1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
15
-
-
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below All types of soilground level.400 mm dia.
80
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.200 mm nominal size dia.
60
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia.
20
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
20
-
-
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
24
-
-
... More
Providing and fixing suitable size threaded mild steel cap/shoe or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia
1
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp.
1
-
-
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).200 mm dia
1
-
-
... More
Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified.80 mm dia.
1
-
-
... More
Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end & PN 16 rating as specified.80 mm dia.
1
-
-
... More
Providing and fixing 80mm dia GI pipes to IS:1239 heavy class with fittings.
80
-
-
... More
Supply, Lowering, installation & testing of KSB make submersible pumping set with 10 HP motor 18 stage pump suitable for maximum capacity of 20 m3 hr. at 100 mtr. Head respectively. With Three Phase
1
-
-
... More
Providing & fixing cable 6 sq.mm. From submersible pump to panel board.
100
-
-
... More
Providing & fixing Panel Board for submersible pump fitted with DOL starter ammeter, voltmeter single phase preventer standard/indo/cop make MCB of off switch push bottom duly wired and made out of 16/18 SWG sheet.
1
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soil
225
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
150
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in.All kinds of soil.
80
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth levelConcrete of M30 grade with minimum cement content of 350 kg /cum
10
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves,chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing & reinforcement with1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)
10
-
-
... More
Centring and shuttering including stutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and acees platform
10
-
-
... More
Steel reinforcement for R.C.C. work including supplying, straightening, cutting, bending, placing in position and binding with GI binding wires (18 gauge) all complete above plinth level.Thermo-Mechanically Treated bars.
30
-
-
... More
Providing and doing Brick masonary work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
5
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia steel bar conforming to IS :1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and heaving manufactures permanent identification mark to be visible even after fixing " including fixing in manholes with 30x20x15 cm cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size )complete as per design.
15
-
-
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.HD-20 circular shape 560 mm internal diameter.
4
-
-
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level.All types of soil400 mm dia.
80
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.200 mm nominal size dia.
60
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia.
15
-
-
... More
Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
15
-
-
... More
Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
20
-
-
... More
Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer –in-charge.
15
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
15
-
-
... More
Providing and fixing suitable size threaded mild steel cap/shoe or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia
1
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp.
1
-
-
... More
Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.
-
-
-
... More
Filter feed pump at Pump Room Set of Two Pumps ( 1 Working+ 1 Standby)Capacity 1.0 LPS Head 70 M.HP 2.0 HP Approx.
1
-
-
... More
Hyd. System for Domestic Water Supply Pump Set of Two Pumps ( 1 Working+ 1 Standby)Capacity 1.0 LPS Head 70 M.HP 2.0 HP Approx.
1
-
-
... More
Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emenegency, audible hooter for failure or flooding, dry running Protection complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge. (Pumps shall be installed in a set of two pumps One working and One standby)Pump Room & basement Drainage Pumps.(Pumps to be suitable to handle solids upto 12 mm size) Capacity - 4.0 LPS (Each) Head - 20 M H.P. - 2.0 HP Approx.
2
-
-
... More
Design, manufacture, supplying, fixing in position, testing and commissioning of the following front operated cubicle type, front access 2mm thick mild steel sheet, free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and suitable for a fault level of 25 MVA symmetrical at 415 volts.All switchboards shall have provision for entry of cables from the top or bottom as required.All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position.
-
-
-
... More
All switchboards shall have provision for entry of cables from the top or bottom as required.
All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position. Electric Panel For Water Supply Pumps at Water Supply Pump Room
INCOMING
1 No. 63 amps TPN MCCB with the following accessories:
1 No. square flush mounting 0-500 volts scaled voltmeter with three way and OFF switch.
Three phase indicating lights.
Electrolytic high conductivity three phase and neutral tinned copper bus bar rated at 100 amps having a current density of 1 amp per Sqmm suitable to with stand symmetrical fault level of 25 MVA at 415 volts. The neutral bus bar is to be of 100% capacity.
OUTGOING UNITS
Two 25 Amp. TP+N M.C.C.B. with rotary handle of breaking capacity 25KA
Two 40 Amp. TP+N M.C.C.B. with rotary handle of breaking capacity 25KA
3 Nos. fully automatic DOL starters with push buttons and ON/OFF indicating lights and overload relays for 1.5 to 7.5 HP pump .
3 Nos. rotary selector switch for selecting mode of operation i.e. auto/manual/off.
4 Nos.cyclic relay for automatic duty changeover of pumps.
3 No. single phase preventors.
3 Nos. square flush mounting 0-30 amps scaled ammeters with three way and OFF selector switch.
Space for 3 Nos. Level Controllers.
Switchgear shall be suitable for the HPS of various motors.
2 Nos. 40 Amp. TP+N MCCB Spare.
-
-
-
... More
The motor control panel shall be prewired with colour coded wires with identification labels complete in all respects as required.
1
-
-
... More
Supplying, installing, testing and commissioning controllers with low voltage relays, stainless steel probes and PVC shroud wiring from tank top to probes of required.Level Controller For Water Supply Pump:To start pump when water level is low in Domestic Water U.G. tank and shut off pump when Domestic Water U.G. tank is full. Also to stop when water level is low in raw water underground tank.
1
-
-
... More
Level Controller For Sump Pumps:To start pump when water level is high in sump and shut off pump when sump is empty. Both pumps are start when sump is over flowing.
2
-
-
... More
Providing and fixing GI pipes complete (IS:1239 Heavy Class) with GI fittings and clamps including MS pipe supports, enamel paint as per specifications cutting and making good the walls etc. complete.
-
-
-
... More
50 mm dia
10
-
-
... More
65 mm dia
10
-
-
... More
80 mm dia
5
-
-
... More
Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified .
-
-
-
... More
50 mm dia
2
-
-
... More
65 mm dia
2
-
-
... More
80 mm dia.
2
-
-
... More
Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end & PN 16 rating as specified.
-
-
-
... More
50 mm dia
2
-
-
... More
65mm dia.
2
-
-
... More
80 mm dia.
2
-
-
... More
Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 16 Kg/Sqcm.
-
-
-
... More
50 mm dia
2
-
-
... More
65 mm dia
2
-
-
... More
80 mm dia
2
-
-
... More
Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects.
-
-
-
... More
Power cable Copper 3 core 10 sq.mm
15
-
-
... More
Power cable Copper 3 core 6 sq.mm
15
-
-
... More
Power cable Copper 3 core 4 sq.mm
10
-
-
... More
Control cable copper 2 core 1.5 sq.mm
10
-
-
... More
Supply of MSEP vessel filter with all necessary accessories. Filter shall be suitable for minimum working pressure of 5 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, rinse drain, vacuum breaker etc. The MS sheet thickness for shell shall be min. 8 mm and for dishes shall 10 mm. The internal surfaces of tank shall be treated with epoxy coaing and external surface with primer and anticorrosive enamel paint (Min. 2 coats). with frontal piping shall be 100 mm dia MSEP along with valves PN 1.0, test cock, air inlet for back washing and pressure gauges at inlet and outlet.
Dual Media Filter For Domestic Water Supply
Capacity- 1250 LPH
Filtration rate- 16000 LPH/Sqm.
Filter dia approx. - 400 MM
Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm
1
-
-
... More
Activated Carbon Filter For Domestic Water Supply
Capacity- 1250 LPH
Filtration rate- 16000 LPH/Sqm.
Filter dia approx. - 400 MM
Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm
1
-
-
... More
Supply Installation,Testing & Commissioning of "Cation" apex thermocon Water Softener fabricated from MS plate as per IS: 2825 (minimum thickness of shall 6 mm and dished end 8 mm) complete with initial charge of resins , GI class 'C' face piping, CI butterfly valves, pressure gauge, hydraulic brine injector, accessories, painting inside with epoxy paint, including 500 liters capacity PVC / HDPE brine tank suitable for 2 regeneration capacity, testing and commissioning complete with resins of approved quality and make.
Hardness- Inlet- 500-600 PPM
Outlet- Less than 100 PPM
Capacity- 1250 LPH
Regeneration period 12 hrs.
Quantity of soft water between two regenerations = 15000 lit
Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm
1
-
-
... More
Supply, installion, testing and commissioning of Hot Water Generation Plant of 15000 LPD with Packaged type Air to Water Heat Pump. These units shall be completely factory assembled including 2 Nos. Scroll Hermatically Sealed Scroll Compressor(s), evaporator, Condenser and Microprocessor Control Panel etc with R410 Referigerant and COP between 3-4. The Heat Pump shall have inbuilt hot water heat exchanger, pumps, valves. expansion valve, integrated CIP system and other accessories.The Heat Pump should be capable of producing hot water at minimum 60°C temperaure at outlet (condenser circuit) temperatures at 10°C ∆T. The Machine should have an operating ambient temperature range of -30°C to 40°C with heating element 20KW including electrical panel complete.. Location: Pump Room
a. Built in electric panel as per safety norms as manufacturer standard.
b. All other mountings, fittings & controls with all accessories and safeties c. All other mounting, fittings and controls.
d. Suitable for electric supply of 415 + 10% volts & 50 Hz.
e. All interconnecting wiring / cabling between heat pump and electrical panel.
f. The Heat pump shall have an in-built facility to start / stop depending on variation in demand at different periods.
g. System shall be complete with SS 304 Tank of 2 Hrs Storage Capacity, Primary and Seconary Circualtion pumps, Heat Exchangers, Return Recirculation Pump, interconnecting piping, valves and all accessories as required.
h. System shall have 20% of total capacity in electrical heating as standby.
i. System shall have an integrated Solar Heating system with 20% of total capacity for energy saving including Flat Plate Solar Panels, Mixing Tanks, Recirculation Pumps, etc
Heating capacity : Approx. 100 KW (2 working + 1 standby)
(50KWx2W+50KWx1S)
Hot Water Storage Tank with insulation complete : 4000 Ltrs
1
-
-
... More
Supply, installation, testing & commissioning of Alum dosing system comprising of 100 ltrs HDPE/FRP tank with 0-6 lph electronic metering type pump complete in all respect.
1
-
-
... More
Taking CTO approval from concerned pollution board including preparation of report / drawings as per pollution board requirement, submission of documents to pollution board, meeting with pollution board officials, .Achieving desired parameters of treated water required at the time of CTO approval is in scope of contractor .Contractor shall include the cost of all chemicals consumed during testing & commissioning and the cost of such items of works which are not explicitly mentioned above, (All relevant official fees for Approval shall be paid by Client)
1
-
-
... More
Supply, installation, testing & commissioning of multi tubes Disinfection system (UV) comprising of U.V Reactor in a close circuit chamber suitable for waste water application. The system should be provided with self cleaning mechanism. Max. operating pressure at 120 psig, electronic ballast type operating frequency 30 kHz - 50 kHz, cabinet safety standard rating IP54, material of treatment chamber SS 316L and uv dosage (uW-sec/cm2) = 60000. Flow rate of 7.5 cum/hr. Qty. = 1 Set
1
-
-
... More
Supply, installation, testing and commissioning of electronic metering type diaphragm, constant flow dosing pump (1 nos.) for Sodium hypo chlorite dosing complete with accessories like tubing, connectors, Non return valves and dosing complete with accessories like tubing, connectors, Non return valves and dosing tank of HDPE Sintex make of capacity 200 liters with lid etc. Capacity -0 to 6 LPH. Foot valve with strainer on pump suction assembly. Tank level switch fitted in pump suction assembly which gives indication when liquid falls below a certain level.
1
-
-
... More
Supply, Installation, testing & commissioning of Bulk Water meter in Flushing Water Supply line & Horticulture Feeder Line.50 mm dia
1
-
-
... More
Supply, Installation, testing & commissioning of Bulk Water meter in Flushing Water Supply line & Horticulture Feeder Line.65 mm dia
1
-
-
... More
Supply, Installation, testing & commissioning of electro-magnetic type flow meter to be installed at raw sewage pump outlet line. 80 mm dia.
1
-
-
... More
Supply of heavy class MS (hot dipped galvanized) puddle flanges as required to be provided ( in the structural slab and wall ) of various diameters. Puddle flanges shall be provided for all the structural component of the STP. The installation of the puddle flanges shall be carried out by the Civil Contractor in accordance to the Civil GA drawings ( to be prepared by the STP contractor) at the required levels and position : under the supervision of the STP contractor.
1
-
-
... More
Supply and fixing of following bare GI tapes / wires including all necessary fixing accessories and effecting connections as per specifications.25 x 6 mm thick GI tape.
50
-
-
... More
Supply and fixing of following bare GI tapes / wires including all necessary fixing accessories and effecting connections as per specifications.8 SWG GI wire
100
-
-
... More
Supply and fixing of perforated type MS powder coated cable trays with full threaded GI rods and base angle supports , hangers, fastners of approved make of the following sizes as per specification.300 mm x 75 x 75 x 2 mm thick
20
-
-
... More
Supply and fixing of perforated type MS powder coated cable trays with full threaded GI rods and base angle supports , hangers, fastners of approved make of the following sizes as per specification.150 mm x 50 x 50 x 2 mm thick
30
-
-
... More
Supplying & laying of following 1100 volt grade PVC insulated copper conductor armoured cables as per specification in existing trenches, cable trays ducts over bed of sand, clamped to wall with suitable clamps,single compression gland with thimble saddles fixing bolts including connecting testing and commissioning.3 core 2.5 sq.mm control cable
50
-
-
... More
Supplying & laying of following 1100 volt grade PVC insulated copper conductor armoured cables as per specification in existing trenches, cable trays ducts over bed of sand, clamped to wall with suitable clamps,single compression gland with thimble saddles fixing bolts including connecting testing and commissioning.6 core 2.5 sq.mm control cable
50
-
-
... More
Supplying & laying of following 1100 volt grade, XLPE aluminium conductor armoured cables having outer sheath of fire retardent extruded (FRLS) compound as per specification in existing trenches, cable trays, ducts over bed of sand, clamped single compression gland with thimble to wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.2 core 6 sq. mm
20
-
-
... More
Supplying & laying of following 1100 volt grade, XLPE aluminium conductor armoured cables having outer sheath of fire retardent extruded (FRLS) compound as per specification in existing trenches, cable trays, ducts over bed of sand, clamped single compression gland with thimble to wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.4 core 4 sq. mm
120
-
-
... More
Supplying & laying of following 1100 volt grade, XLPE aluminium conductor armoured cables having outer sheath of fire retardent extruded (FRLS) compound as per specification in existing trenches, cable trays, ducts over bed of sand, clamped single compression gland with thimble to wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.4 core 6 sq. mm
50
-
-
... More
Supply Installation, testing & commissioning of Electrical Control Panel suitable for 415 V, 3 Phase, 4 wies, 50Hz, MBBRricated out of 16 SWG CRCA sheet steel, IP52, wall / floor mounting type. The sheet steel shall undergo minimum nine tank treatment followed by finishing powder coating of min 60 micron thickness. The board includes removable gland plates, cable glands, including connection with outgoing feeders complete in all respect. The outgoings from the panel shall be suitable for all equipments, various pumps, blowers with suitable capacity star delta / DOL starters, plant lighting, ventilation, treated water transfer pumps to horticulture and flushing system etc. Adequate size cable alley shall be provided for each cable bending & termination. The incoming MCCB shall be of Four Pole microprocessor based with inbuilt O/L & S/C release with E/F protection and all Outgoings MCCB's shall be of Three Pole thermal-magnetic based with inbuilt O/L & S/C release. All MCCB's shall be of min Ics = 25 KA breaking capacity, Ics = 100% Icu, with rotary handle & pad locking arrangement, with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall be with solid isolable neutral link. The breaking capacity specified is Ics value. Cyclic timers will be provided for all type of pumps for alternate working of stand by pumps.
The fault withstanding capacity of panel shall be 25 KA rms for 1 sec.
BUS BAR of suitable current rating at 500 Volts, 3 phase 50 HZ TPN high conductivity electrolytic Aluminium bus bar with conductivity on min 57 to 58% of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 1.00 sq mm / amp.
-
-
-
... More
The Maximum allowable temperature for the Bus bar to be restricted to 85 deg C. The temperature rise should be restricted to 35 deg C above ambient temperature.
The above board shall be complete with 3 nos. phase indicating lights, flush mounted Ammeter, Voltmeter, CT's, PT's, selector switches, protective fuses etc. at Incomer with all inter connections by min. 1.5 sq.mm. Copper wires.
Panel shall have necessary arrangement to operate the system automatically / manually. Only main power supply upto the STP shall be provided by the owner. All required items like water level controller Digital type level indicator with magnetic SS level probes for Filter feed tank & Treated Water Storage Tank, electrical wiring, armoured aluminium power cables and copper control cables between panel to various pumps & equipments, cable terminations, double compression glands, double GI plate earthing with GI strips, GI perforated cable trays to carry power and control cables from panel to various equipments including supports, with all accessories.
KWHR meter with RS 485 communication port, CT's with accuracy class 1.0 will be provided in Flushing water pumps and Horticulture pump feeders for energy consumption record.
-
-
-
... More
The following pumps shall be controlled by the panel : (The ampere rating will be as per the final selection of equipment)
(a) Raw Sewage Pumps - 2 Nos.
(b) Air Blowers - 2 Nos.
(c) Sludge Disposal Pumps - 2 Nos.
(d) Screw Pumps - 2 Nos.
(e) Hydraulic Filter Press - 1 Nos.
(f) Filter Feed Pumps - 2 Nos.
(g) Irrigation Water Transfer Pumps - 2 Nos.
(h) Flushing Water Transfer Pumps (Hydropnumatic) - 1 set (2 no. of pumps -1 working+ 1 Standby)
(i) Dewatering Pumps Unit (for 2 Nos. Dewatering Pumps)
(j) Ozonator - RO
(k) Spare Feeders - 2 nos 40 amp TP MCCB (l) Sludge Recirculation pump-2 Nos.
(m) Alum Dosing Pump-1 Nos.
1
-
-
... More
Supply & fixing in position ISI marked cast iron Wafer type butterfly valves (PN 10) as per IS:13095, with SS disc, SS shaft, SS seating rings, SS internal fastening, EPDM seat, CS external nuts-bolts including transporting to worksite etc. including testing, Complete as per drawings & directions of the Engineer-in-charge. 200 MM NB (gear operated)
1
-
-
... More
Providing and fixing all piping (as described below) and isolation control Ball / butterfly valves (Min. PN 10) of required sizes and numbers with all accessories, fittings, supports, clamps, double flanged flexicon rubber expansion joint with rubber gasket as per system pressure, nuts, bolts, washers, puddle flanges for all tanks, other flanges, NRV's, flow control valves, flow measurement device, SS 304 screen strainers at suction of clear water pumps, for making the system complete in all respects with anti corrosive protection.
Butterfly Valve : Cast Iron Wafer type butterfly valves (PN 10) as per IS:13095, with SS disc, SS shaft, SS seating rings, SS internal fastening, EPDM seat, CS external nuts-bolts Check Valve : Cast Iron body dual plate wafer type check valve (NRV) (PN 10) with SS disc, SS stem, EPDM seat, spring & pin, SS stem, SS internal fastening, CS external fastening PVC Flexible Breaded Hose Pipe : Submerged piping for raw sewage transfer pumps / Submerged piping for diffusers. uPVC (Sch 40) : All Submerged piping before filter feed tank for air / water. uPVC (Sch 40): For all suction and discharge of the pumps and inter connected pipe line
MS pipe : For non submerged Air line
The various pipe sizes should be selected that the Maximum velocity in any pipe should not exceed 1.50 mps. Min. 80 mm pipe dia is required in individual line of raw sewage transfer pumps and min. 65 mm uPVC Sch 40 pipe to be considered for each dewatering pumps outlet and common header.
1
-
-
... More
Supply, installation, testing & commissioning of Ozonator (1 Set) to treat 7500 lph water suitable for waste water application. The system should be complete consisting of Ozone Generator, Oxygen Generator, Air Compressor, Water Chilling System, Ozone Diffusers, Pipeline & fittings, Central Control Panel etc with Re-circulation based Ozone mixing system comprising of Re-circulation Pump, Ventury Injector, Static Mixer etc complete in all respect. Capacity = 20 grms / hr
1
-
-
... More
Supply, installation & testing and commissioning of vertical floor mounted mild steel Epoxy pressure type/FRP Activated carbon filter of suitable size for required flow and head, provided with an inlet distributor. The vessel is painted externally and internally with epoxy paint with primer with frontal piping & valves, back wash system & filter media etc. complete with standard fittings like cover, pressure gauge at inlet & outlet, sampling cock, rinse drain valve, air vent valve with piping, bolts, nuts & rubber gaskets. Flow rate = 5 M3 / hr Vessel Dia = 650 mm
HOS = Min. 1800 mm
Filteration rate = 12 M3/M2/Hr
Working pressure = 3.5 Kg/Sq.cm.
Test pressure = 5.5 Kg/Sq.cm.
Qty. = 1 Set
1
-
-
... More
Supply, installation & testing and commissioning of vertical floor mounted mild steel Epoxy pressure type/FRP Multi Grade filter of suitable size for required flow and head, provided with an inlet distributor. The vessel is painted externally and internally with epoxy paint with primer with frontal piping & valves, back wash system & filter media etc. complete with standard fittings like cover, pressure gauge at inlet & outlet, sampling cock, rinse drain valve, air vent valve with piping, bolts, nuts & rubber gaskets. Flow rate = 5 M3 / hr Vessel Dia = 650 mm
HOS = Min. 1800 mm
Filteration rate = 12 M3/M2/Hr
Working pressure = 3.5 Kg/Sq.cm.
Test pressure = 5.5 Kg/Sq.cm.
Qty. = 1 Set
1
-
-
... More
Supply, installation, testing and commissioning of PVC tube deck settling media to be installed in secondary settling tank. VH-750 mm, Angle of Inclination - 60° slope, Shape - Hexagonal Chevron.
1
-
-
... More
Supply, installation, testing & commissioning of Random Media for attached growth process (MBBR Technology) MOC = PP, Specific Gravity = 0.93 - 0.95, Surface Area = 400 sq.mtr / cum.mtr. (Note : - Volumetric check of MBBR Media to be done at site. Also STP Vendor should provide the Test Certificate of MBBR Media.)
1
-
-
... More
Plant room drainage sump with 2 nos submersible dewatering pumps having 10 cum/hr discharge at 14 meter head in CI / PP casing and impeller, SS shaft, 12 mm min particle size, 50 Hz, 400 volts, IP68, F / B class insulation with float valve / level controller, piping, valves, nrv etc complete. The outlet pipe from Dewatering Pumps to be connected to Equalization Tank.
1 nos. Dewatering Pump Control unit for two nos. three phase pumps, to operate Pumps alternatively and in case of Excess inflow into the Sump, Both Pumps Will Start Automatically with Magnetic Water Level Controllers, Audio, Visual & Alarm Including All Standard Accessories Like Ammeter, Auto Manual switch, DOL Starter, Indicating Lights, And Pumps On/ Off Lights, Protection MCB, Dry Running Protection Etc. complete in all respect.
1
-
-
... More
Providing, fixing, testing and commissioning of single stage, horizontal, centrifugal, 2 pole, 50 HZ, AC, monoblock pumps (as per IS : 9079) incorporating C.I. casing and frame, stainless steel shaft, bronze / SS impeller, TEFC induction motor directly coupled to the pump, IP44 protection, class B insulated, C.I. body, hydraulically and dynamically balanced to give vibration free operation, with mechanical seal arrangement, fixed on a base plate with suitable vibration eleminator pads complete with PCC foundation, bolts grouted in CC blocks of 1:2:4, suitably rated DOL / star-delta starter fixed inside main electrical panel complete with level controller, necessary wiring, pressure gauge on the delivery side and strainer on suction side, including non-return valve and isolating valves on suction and delivering sides as required, including suction and delivery headers complete in all respects.
-
-
-
... More
(i) Filter Feed Pumps 1 Set - 2 nos (1W+1S), having discharge : 5000 lit/hr (each) at 30 meter head
1
-
-
... More
(ii) Irrigation Water Transfer Pumps to irrigation network 1 Set- 2 nos (1W+1S), having discharge : 5000 lit/hr (each) at 25 meter head
1
-
-
... More
Providing, fixing, testing and commissioning of Mannual type filter press for drying the organic sludge from tube settler of 16 nos of 18"x 18" sizes PP/PVC plates. The filter press should be with filter cloth, handle effluent water tray, sludge disposal tray, motor, poly dosing system complete in all respects.
1
-
-
... More
Non clogging type horizontal screw type filter press feed pumps capable of handling solids upto 8 mm having capacity 2 cuM/hr at 40 meter head. 1 Set : 2 nos (1W+1S) to feed filter press having C.I. MOC complete with all accessories, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically.
1
-
-
... More
Non clogging type horizontal centrifugal Sludge transfer / disposal / recirculation pumps capable of handling solids upto 8 mm, having C.I. casing, C.I. impeller, SS shaft, chrome steel shaft sleeve, IP 55, Class B insulation, mechanical seal complete with all accessories, motor of required capacity, Pressure gauge on delivery line with isolation cock, level controller (with wiring) to control the level of sump automatically. Flow rate : 0.5 Cu M / Hr at 10 meter head. 1 Set : 2 nos (1W+1S)
1
-
-
... More
Non clogging type submersibl/CENTRIFUGAL MONO BLOCKe raw sewage pumps for transfer of raw sewage to anoxic tank capable of handling solids minimum 7 mm, in CI casing and impeller, SS shaft, IP 68, Class F / B insulation, mechanical seal complete with all accessories, motor of required capacity, Pressure gauge on delivery line with isolation valve, level controller (with wiring) to control the level of sump automatically including bypass line from pump outlet to outer sewer line as per site with all valves. (for Bypass connection, battery limit of STP vendor is From Raw Sewage Transfer Pumps to upto 2 meters outside from STP unit). Flow rate : 1 Cu M / Hr at 12 meter head. 1 Set : 2 nos (1W+1S)
1
-
-
... More
Non clog type air dispersion system capable of handling required 3-5 cfm of air with oxygen transfer efficiency 3-4% per meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired easily from platform at the top. Air dispersion system shall be provided coarse air bubble type diffusers for raw sewage equalization tank & sludge holding tank and fine bubble type diffusers for MBBR Tanks.
1
-
-
... More
Air diffuser system with Twin type rotary air blowers capable of delivering min. 60 cum/hr (each) of free air at 0.5 kg/cm2 driven through "V" belt or directly coupled through flexible coupling to a TEFC motor of suitable HP Suitable for 415 + 10% volts, 3 phase, 50 cycles A/C supply fine bubble membrane type diffusers complete with valves & air distribution grid complete as required. 1 Set : 2 nos (1W+1S)
1
-
-
... More
2 nos. S.S. 304 bar screen having 10 mm opening of 600 mm x 600 mm size with suitable lifting arrangements complete as required.
1
-
-
... More
Design, Engineering, supplying, installation, testing and commissioning of packeged type aerobic Sewage Treatment Plant based on MBBR Technology process (with air diffuser system), Total effluent handling capacity of 10 m3 per day. The raw sewage collection / equalization sump with screen shall be a part of the STP.
The plant shall be complete with a central Electrical Power and Control panel fully pre/site wired and with all power and control cables to all pumps and equipment including all instrumentation, water level controllers and other controls. All the equipment, piping, pumps, blowers and electrical are to be housed in a plant room to be built as per area available at site. Puddle flange, inlet, outlet overflow, vent, M.S. cover, drain channel with M.S. gratings, rungs, sump to house pumps will be included. Nature of Effluent : Hospital sewage from toilet use and kitchen waste etc
The rates will include all pumps, piping, valves, controls, reactor and tube settler media, blowers, diffusers, central Electrical Power and Control panel with all power and control cables to all pumps and equipment including all instrumentation, water level controllers and other controls. The RCC work of STP will be done by Client
BASIC DATA ON INFLUENT RAW WASTE WATER Total Suspended Solids (TSS) : 250 - 450 mg/lit
BOD5 : 250 - 450 mg/lit
COD : 500 - 800 mg/lit
pH : 6.0 - 8.5
Oil / Grease : upto 75 mg/lit
Inflow time : 24 HRS
Peak factor : 3
Temperature : Ambient
-
-
-
... More
TREATED EFFLUENT WASTE WATER QUALITY
As stipulated by State Pollution Control Board (PCB), the treated effluent quality shall be within the following values for various parameters. The treated water quality should be fit for Recycling in Flushing and Landscaping – pH : 7 - 8
Total Suspended Solids (TSS) : 10 mg/lit
BOD5 : 10 mg/lit
COD : 50 mg/lit
Oil / Grease : 5 mg/lit
Colour : Colourless
Odor : unobjectionable E.coli : Nil NH4-N : 5 mg/lit
N Total : 10 mg/lit
PO4-P : 2 mg/lit
-
-
-
... More
The STP shall be designed based on the attached details and parameters. The capacities of various tanks and pumps are guidelines to the vendor. The contractor has to submit detailed calculations of system and equipment he proposes to install.
The inlet of raw sewage pipe is about 2.0 - 2.5 meter from ground level. However, the exact Invert level of incoming sewage should be taken before start of work.Technical support while taking Approval from pollution board at initial & various other stages of works including preparation of report / drawings as per pollution board requirement, arrangement of raw sewage for testing & commissioning. Contractor shall include the cost of all chemicals consumed during testing & commissioning and the cost of such items of works which are not explicitly mentioned above, but are mandatory to have pollution board approval. (All relevant fee for PCB Approval shall be paid by client).
The STP should follow all the concern Indian and Local norms.The Contractor shall have to submit detailed civil GA drawings (Plan & Section), P & I diagram, schematic diagram and shop drawings of the plant indicating all sleeves etc for the various component and additional component if so required for the complete working of the STP also indicating all components in plant room including recycle supply pumps for flushing and horticulture. The drawings will have to submit for approval before start of work.
Bypass arrangement shall be provided so that raw sewage transfer pumps can be used to pump out sewage to external manhole incase of maintenance of STP (Battery Limit = From Raw Sewage Transfer Pumps to upto 2 meters outside from STP unit).
The scope of work includes design, drawings, coordinating during construction, erection, commissioning, trial run and obtaining test results of below/above ground sewage treatment plant with electrical, mechanical, piping and controls.
The work is required to be carried out on a turnkey basis covering a guarantee of satisfactory performance as per the standards laid for a minimum of One year.The contractor will be solely responsible for smooth running of the sewage treatment plant and overall functioning of STP. In case it is found in the later stage that some additional fixtures / equipment are required to be added in order to achieve desired quality, the contractor would be liable to provide without any extra charges. Ventilation of the plant room / tanks including exhaust fans, ducts etc. shall be coordinated with the Ventilation Consultant. Ventilation work shall be carried by ventilation vendor.
The STP shall consist of following units but not limited to these unit as may be required by the manufacturer's design to achieve the desired quality parameters in treated effluent. ASSOCIATED CIVIL WORK
-
-
-
... More
Bar Screen chamber suitable for 2 nos. bar screen with suitable lifting arrangements complete as required.
1
-
-
... More
Oil / Grease removal chamber complete in all respect.
1
-
-
... More
Raw sewage Collection cum Equalization tank for housing of submersible sewage lifting pumps. Provision for aeration of sump will be kept with adequate numbers of coarse air bubble air diffusers to avoid any smell and sedimentation problems.
1
-
-
... More
Plant room drainage sump to collect the waste water from the back washes, drains etc.
1
-
-
... More
Stairs, Railing, Sheds, Foot rests, Manhole covers, Maintenance Platform, equipments foundation etc is the scope of Civil Contractor.
1
-
-
... More
Treated water storage tank
4
-
-
... More
MBBR tanks (cap. 5 Cum) with air diffusion system and piping complete of adequate capacity. (MS 6mm base & 5mm side with 2mm inside FRP)
1
-
-
... More
Secondary settling tank (cap. 5 Cum) (clarifier) (Tube Settler / Lamella Settler) having hopper bottom, baffle wall, outlet launders with arrangement of lifting sludge from the bottom complete as required. (MS 6mm base & 5mm side with 2mm inside FRP)
1
-
-
... More
Filter Feed Tank (cap. 4 Cum) with suitable inlets, outlets, drain, overflow facility complete as required.(MS 5mm base & 5mm side with 2mm inside FRP)
1
-
-
... More
Sludge thickener cum digestor (Sludge Holding tank) (cap. 5 Cum) with provision of inlet, outlet, drain, overflow, supernatant withdrawl arrangement with provision of air diffusers for aeration.(MS 5mm base & 5mm side with 2mm inside FRP)
1
-
-
... More
Stairs, Railing, Sheds, Foot rests, Manhole covers, Maintenance Platform, equipments foundation etc is the scope of Civil Contractor.
1
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
SUBHEAD- I: DISTRIBUTION BOARD
-
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 way, Double door
1
-
-
... More
8 way, Double door
1
-
-
... More
12 way, Double door
1
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
-
-
-
... More
4way Double door
1
-
-
... More
6 way Double door
6
-
-
... More
8 way Double door
6
-
-
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps
1
-
-
... More
63 amps
1
-
-
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
63 amps
13
-
-
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
252
-
-
... More
Providing and fixing 125A capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.
5
-
-
... More
Supplying and fixing following rating, double pole, single phase and neutral, 240 volts, residual current circuit breaker ( RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc as required.
-
-
-
... More
63 amps
36
-
-
... More
Supplying and fixing following rating, four pole, three phase and neutral, 415 volts, residual current circuit breaker ( RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc as required.
-
-
-
... More
63 amps
6
-
-
... More
SUB-HEAD - II : INTERNAL WIRING
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
Group - C
403
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1400
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1306.67
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
70
-
-
... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
100
-
-
... More
4 x 10 sq.mm + 2 x 6 sq.mm. earth wire
100
-
-
... More
4 x 16 sq.mm + 2 x 6 sq.mm. earth wire
100
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in residential buildings).
112
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
66
-
-
... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make:KEI,Worldcab,RR Kable,Bonton
990
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make:KEI,Worldcab,RR Kable,Bonton
495
-
-
... More
SUB-HEAD III - FANS & LIGHT FIXTURES:
-
-
-
... More
Recessed luminaire ZEN 2x2 with LED(Light Emitting Diode), system power: 40W, colour temperature of 6000K, cool white, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, CRI80, luminous flux of 4000 lm, direct light emission, CRCA frame, polyester white powder coat applied over a 5-stage pre-treatment, prismatic diffuser for glare-free uniform light, integral electronic control gear, Protection class I, IP20, L = 595 mm, B = 595 mm, H = 70mm Product Code : ZEN2X2
74
-
-
... More
Deep Recessed Round downlight Ares with HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power: 15W, Luminous flux of luminaire 1800 lm, Colour temperature of 6000K, cool white, CRI 90, THD5%, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester powder white coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for homogenous light distribution, electronic control gear. Protection class II, IP 20
Ø = 120 mm, DA(Ø) = 110 mm, H = 50 mm.
Product Code : ARES15R
145
-
-
... More
LED Batten, Wall / Surface / Celling Mounted, system power: 20W, luminous flux of 2000 lm, direct light emission, 230V, Electronic Control Gear, 6000K, anodized aluminium housing, satin Diffuser,
Protection Class II, IP20 , L=1200mm, B=21mm, H=35mm.
Product Code : BATTENAL20
12
-
-
... More
Led Wall glazer 36W, 6000K, Beam angle is 24/36° , Sleek and high quality extruded aluminum construction IP65 rated, Aluminium Housing, Body Colour : Grey. Dimensions(LXWXH)mm : 1000X40X80mm.
Product Code : NE WW HV V 36
50
-
-
... More
Led 2X2 Cleanroom 40W Recess-mounting TOP-opening LED cleanroom IP65 ,zeromaintenance
luminaire having highly translucent opal diffuser is a perfect energy-saving solution for F&B and Pharma industries. 6000K. LXW : 595X595mm , Cut-out : 575x575, H : 80mm
Product Code : CLEANROOM2X2
136
-
-
... More
LED bulkhead with LED (Light Emitting Diode) system power: 10W, luminous flux of luminaire 800lm, 6000K, cool white, CRI 80, 230V, Direct light emission, Aluminium housing, opal diffuser, integral electronic control gear, Protection class I, IP65, IK08, L=200 mm, B=100mm, H=50mm
Product Code : BULKH10
10
-
-
... More
Pendant luminaire Ring LED (Light Emitting Diode) system power: 36W, Luminous flux of luminaire 4320 lm, Colour temperature of 6000K, cool white, CRI 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire profile in aluminium, White coloured powder coated, opal diffuser for a homogenous light distribution, internal wiring, Electronic control gear, Protection class I, IP20,
Dia : 450 mm, W : 60mm, H : 55 mm
Product Code : RING450
5
-
-
... More
LED Flood light fitting 50W RGBW IP65 made up of high pressure die cast aluminium body with embossed logo, corrosion resistance powder coating with PMMA secondary lens with 60 degree beam angle for effective distribution. Colour temperature: – RGBW . Product Code : FLOOD50RGBW
30
-
-
... More
LED Linear Wall Washer 20 Watt LED Light fitting RGBW complete with all accessories, housing made of Aluminium, IP65.
Product Code : WALLWASHERRGBW
32
-
-
... More
LED Street Light 60W, 6000K, IP65 Aluminium Housing, Luminaire on existing 7.5 Mtr pole .
Product Code : STREET60
4
-
-
... More
LED Bollard HALF T Shape 12W, 6000K cool white, IP65 , suitable for architectural outdoor lighting typically giving off light from the sides best suitable to illuminate walkways, steps or pathways. Aluminum Housing , Height : 500mm
Product Code : HALFTBOLLARD
6
-
-
... More
LED 40W post top light, 6000K cool white, IP65, having pleasing proportions and well-sculpted lines blends in seamlessly with its surroundings.Combining reliable corrosion resistant, weather proof construction made of pressure die cast aluminium housing powder coated graphite grey in color having robust design delivers to meet the landscaping needs. Dia : 400mm, H : 263mm, Pole OD : 78mm
Product Code : POST-TOP
2
-
-
... More
SITC Fresh air fan 250 mm
10
-
-
... More
SITC Fresh air fan 300 mm
14
-
-
... More
SUB HEAD - IV : SERVER, DATA & NETWORKING
-
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
Telephone socket outlet
20
-
-
... More
TV antenna socket outlet
15
-
-
... More
Supplying and fixing of RJ-11/RJ 45 (Both Twin socket)I/O Telephone outlet with shutters along with suitable base plate,key stone and surface/concealed back boxes of adequate module size, etc comple in all respect.
15
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
1 or 2 Module (75mmX75mm)
25
-
-
... More
Supplying, laying, testing and commissioning of following size anealed tinned copper conductor PVC insulated and sheathed armoured copper telephone cables with suitable clamps, saddles and including making terminal joints complete as required.
-
-
-
... More
10 pair
200
-
-
... More
CABLING AND CONDUITING
-
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
260
-
-
... More
Supplying, fixing, connecting & testing of Telephone Tag Block krone type in a suitable size 1.6 mm thick dust and vermin proof Sheet steel enclosure duly painted by synthetic enamel over anti corrosive primer, lockable and hinged cover with provision for cable through glands complete in all respects.
-
-
-
... More
10 pair Krone
2
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
300
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required
-
-
-
... More
25 mm
250
-
-
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.25 mm
100
-
-
... More
SUB HEAD - V : LIGHTNING PROTECTION SYSTEM
-
-
-
... More
Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long, copper tube, having single prong at top, with 85mm dia 6 mm thick copper base plate including holes etc. complete as required.
14
-
-
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
110
-
-
... More
Providing and fixing GI tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as required. (for horizontal run).
220
-
-
... More
Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as required. (For vertical run.)
250
-
-
... More
Providing and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long with 4 Nos. of G.I. bolts, nuts, check nuts and spring washers etc. complete as required.
110
-
-
... More
Providing and laying G.I. tape, 32mm x 6mm thick, from earth electrode directly in ground as required.
125
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement etc. with charcoal or coke and salt complete as required.
20
-
-
... More
SUB HEAD - VI : FIRE ALARM SYSTEM AND PUBLIC ADDRESS SYSTEM
-
-
-
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications
-
-
-
... More
Two Loop Panel.
1
-
-
... More
Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
33
-
-
... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
15
-
-
... More
Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.
10
-
-
... More
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
10
-
-
... More
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
5
-
-
... More
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
4
-
-
... More
Supplying, installation, testing & commissioning of addressable phone control module complete as required.
4
-
-
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
5
-
-
... More
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
5
-
-
... More
Supplying, installation, testing & commissioning of addressable strobe complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.
2
-
-
... More
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.
2
-
-
... More
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
750
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
180
-
-
... More
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
500
-
-
... More
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
20
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
4
-
-
... More
Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.
5
-
-
... More
Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required.
5
-
-
... More
audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
1
-
-
... More
directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
1
-
-
... More
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
250
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
100
-
-
... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.speaker cable Single pair, 2-core, 1.5 sqmm
150
-
-
... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required speaker cable Two pair, 2-core, 1.5 sqmm
200
-
-
... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required speaker cable Three pair, 2-core, 1.5 sqmm
100
-
-
... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required speaker cable Four pair, 2-core, 1.5 sqmm
100
-
-
... More
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
500
-
-
... More
SUB-HEAD-VII: CCTV
-
-
-
... More
1/2.8 '' 5 .1MP CMOS Starlight Sensor Dome Camera with effective 2592(H) X 1944(V) pixels, Motorized varifocal lens 2.7~13.5mm(F1.4) , Video Compression H.265, H.264,M-JPEG , Color: 0.08Lux)/F2.0, 0 Lux (IR On), IR Distance 80ft, True WDR 120dB , P Iris , Dual Streaming , Frame rate Upto 30FPS , Smart video Compression, Basic Analytics like Tripwire, Camera Tamper , Shake cancellation, Minimum 20 virtal lines and polygons included, Optional Video Content Analytics Complete Suite, Sutter speed Auto / Manual (1/15 ~ 1/60000), Slow Shutter(off, 2x~8x) ,3D DNR , Support SD Card , Audio Input & Output , Alarm Input & output , Polygon motion detection , Privacy masking, ONVIF Profile S , Ethernet port 10/100 Mbps, 12DC, PoE, Metal body, IP66 & IK 10 protection as per detail tender specification , Certificate UL, BIS, EN , FCC & RoHS. 3 Years Standard Warranty
26
-
-
... More
1/2.8 '' 5 .1MP CMOS Starlight Sensor Bullet Camera with effective 2592(H) X 1944(V) pixels, Motorized varifocal lens 2.7~13.5mm(F1.4) , Video Compression H.265, H.264,M-JPEG , Color: 0.08Lux)/F2.0, 0 Lux (IR On), IR Distance 80ft, True WDR 120dB , P Iris , Dual Streaming , Frame rate Upto 30FPS , Smart video Compression, Basic Analytics like Tripwire, Camera Tamper , Shake cancellation, Minimum 20 virtal lines and polygons included, Optional Video Content Analytics Complete Suite, Sutter speed Auto / Manual (1/15 ~ 1/60000), Slow Shutter(off, 2x~8x) ,3D DNR , Support SD Card , Audio Input & Output , Alarm Input & output , Polygon motion detection , Privacy masking, ONVIF Profile S , Ethernet port 10/100 Mbps, 12DC, PoE, Metal body, IP66 & IK 10 protection as per detail tender specification , Certificate UL, BIS, EN , FCC & RoHS. 3 Years Standard Warranty 3 Years Standard Warranty
6
-
-
... More
1/2.8'' 5 .1MP CMOS Starlight Sensor Long Distance Main In/Out Gate Bullet Camera with effective 2592(H) X 1944(V) pixels, Motorized varifocal lens 6~50mm(F1.4) , Video Compression H.265, H.264,M-JPEG , Color: 0.08Lux)/F2.0, 0 Lux (IR On), Smart IR Distance 120ft, True WDR 120dB , P Iris , Dual Streaming , Frame rate Upto 30FPS , Smart video Compression, Basic Analytics like Tripwire, Camera Tamper , Shake cancellation, Minimum 20 virtal lines and polygons included, Optional Video Content Analytics Complete Suite,, Sutter speed Auto / Manual (1/15 ~ 1/60000), Slow Shutter(off, 2x~8x) ,3D DNR , Support SD Card , Audio Input & Output , Alarm Input & output , Polygon motion detection , Privacy masking, ONVIF Profile S , Ethernet port 10/100 Mbps, 12DC, PoE, Metal body, IP66 & IK 10 protection , Certificate UL, BIS, EN , FCC & RoHS. 3 Years Standard Warranty
5
-
-
... More
Professional Video Control Operations Management Playback Recording Single Server Multiple Client Video Surveillance 64 bit Software with Sixteen channel camera licensce with unlimited clients supporting 5000+ Camera models and 15000 devices at SDK level , Onvif S supported, edge base recording , advance maps, advance event and action manager with streaming server supporting optional edge or server level analytics at extra charges and optional facial recognition with 2 year standard support pack included
2
-
-
... More
Tower Mount upto 16 Camera Channel Monitoring Workstation Single Socket Intel i5 Processor with 4GB Graphic Card, 10th generation , 20 TB HDD, 16GB DDR RAM. VCOMPRS Software Channel Prices extra
2
-
-
... More
42" Monitor Bezel Thin 1080p HD LED Screen for live view and replay of recorded View with mounting stand & HDMI cable
2
-
-
... More
Storage NAS Box Drive ( H.265/ 60 days / 5 MP/ 15 fps) for cameras with Usable Capacity as mentioned in Qty
4
-
-
... More
Supply, installation, testing & commissioning of 24 Port Layer 2 Managed Access POE switch with 20x1G Base-T PoE+ and 4x1G Base-T Ports.Should support switching fabric of 240 Gbps or more. Should support PoE+ with PoE budget of 300 W. Operating Temp: 0° C to +50° C
2
-
-
... More
Supply , Installation , Testing and Commisioning of 1KVA online UPS with inbuilt battery for field equipments, 30mins backp on full load with 3 yrs warranty.
2
-
-
... More
Supply fitting, fixing and testing of 9 U Wall/Pole mount weather proof rack for keeping switch & other items in the filed along with all required acessories .
4
-
-
... More
Supply , Installation , Testing and Commisioning of 1 Mtr Patch cord.
2
-
-
... More
Supplying and Laying of CAT-6 cable.
600
-
-
... More
Supplying and Laying of 25mm PVC conduit with bands as required HMS ISI approved.
400
-
-
... More
Supplying and Laying of ISI Approved 2 Core 2X 1.5mm power cable.
360
-
-
... More
Supply, fitting, fixing and testing of 6 mtrs weather proof pole
6
-
-
... More
Supply of Furnitures, AC for control room
2
-
-
... More
Commissioning of the System
2
-
-
... More
Hard digging if required with Pipe for Cable
200
-
-
... More
Supplying, installation, testing & commissioning of 13 Passenger , Gearless type,Machne room-less passenger lift having contract speed of 1.5 MPS serving different floors in the lift shaft as per detailed specifications as under and additional details given in schedule of technical particulars. Provisions of General CPWD specifications for lift works are to be followed.Design of lifts:- Passengers Type Capacity:- 13 PassengersSpeed - 1.5 Metre/Sec. (MPS)Door Operation - Full Height Infra-red cross-multi beamFloor - B+G+3 = 5stops Travel - 18 Mtr. (Approx.)Stop & Opening - 5 Stops & 5 Openings (One side only) Type and Position of Machinery - Gearless type, Machine Room-less Controller - Microprocesser based AC variable voltage & variable frequency Control Lift Car inside size - 2000mm x 1100mm ( Width x Depth). Size of Lift Well - 2500mm x 1900mm (Width x Depth)Entrance -900mm Pit Depth -1600mm Automatic rescue device complete with dry maintenace free batteries as required.Operation - Microprocessor based Simplex Selective Collective with attendant.Power - 415 V ±10%, 3 Phase, 50 Hz.Type or Design of Lift Car - Stainless steel scratch proof (Moon Rock Finish).Car operating Panel / Landing operating panel - Car operating panel with braile symbol luminous buttons and braile illuminated push buttons on all landing in Stainless Steel Mirror finish.Hand rail - Shall be SS finished not less than 600mm long, fixed above 900mm from the car-floor level on rear-wall or side wall.Voice announcement system - In car to announce the position of the elevetor in hoist way as the car passes or stop at a floor served by the elevator.Intercom system
2
-
-
... More
SUB HEAD -EXTERNAL ELCTRIC WORKS
-
-
-
... More
Supply, installation, testing & commissioning of two 11Mtr. pole structure, 11KV with cross arms, suitable clamps, insulators, disc insulators, 11KV lightning arrestors, complete stay with insulator & wire, foundations, gang operated air break switch with extended handle, 11KV drop out fuses. This shall have termination arrangement for outgoing through HT XLPE cable of suitable size and necessary 6 inches dia GI pipe shall be provided for cable support complete in every way.11 kV HT 'H' pole as per specification & as described abov
1
-
-
... More
11 KV HT Metering Panel (SEB's) The instrument and relay panel fitted with: 1- digital voltmeter scaled 0-11000volt with 3 way and OFF selector switch.
1- digital Ammeter scaled 0-150 amps with 3 way and OFF selector switch.
1- Triple pole I.D.M.T. overcurrent & earth fault relay with two outer elements connected for overcurrent protection and the middle element for earth fault protection overcurrent, setting 50% - 200%, Earth fault setting 20% - 80% (51 and 51N).
"1 No. SEB approved digital Trivector meter with MDI in KVA of accuracy class - 0.5.
Note: The contractor shall get the Trivector meter , CTs' & PT tested by SEB and the charges for liasioning for the same will be paid extra."
One Set of Phase Indicating Lamps.
1- set of Red/Green indicating lamps for close and open position
1- Amber indicating lamp for auto trip 1- clear indicating lamp for trip circuit healthy
1- set of white indicating lamps one per phase 1 - blue indicating lamp for spring charged
2 Nos. indoor cable end box suitable for 3C x 300 sq.mm. 11 KV(E), aluminium conductor XLPE Ar. cable (Incoming & Outgoing cable).
Supply Rate for Metering Panel as described above Note: The contractor shall ensure that the above panel meets the requirement as insisted by Gujarat State Electricity Board authorities for satisfactory operation and as per the Drawings. If State electriity Board will Provide the HT meter with CT-PT Metering unit then this item NS-1.2 will not payed to the contractor.
1
-
-
... More
11 KV HT Switchboard
HT PANEL-1
Incomer
1- Air insulated metal clad housing
1- set of 3 phase PVC insulated copper busbars 630 amps 6- Single pole cluster type isolating contacts; i.e. plug and switches
1- Triple pole drawout truck mounted 11 kV 350 MVA, 630 amps Vacuum circuit breaker fitted with arc control devices.
1- Trip free 230 V AC, motor charged spring release closing mechanism complete with necessary auxiliary switches emergency hand trip device and mechanical 'OFF' and 'ON' indicator.6 NO/NC contacts for remote ON/OFF/TRIP status 1 - 24 volts DC shunt trip coil
3 - Dual Core Cast resin Current transformers of ratio 75/5 Class 5P10 and Class 1.0, 15 VA burden for protection & metering.
1- Strip heater with thermostat to prevent absorption of moisture
1- 3 Phase cast resin horizontal draw out line potential transformer ratio 11000/√3 :110/√3 volts, connected star/star with H.V. and L.V. connections, H.V. and L.V. fuses, isolating plugs for H.V. and L.V. connection.
The instrument and relay panel fitted with
1- Square voltmeter of 96 x 96 mm scaled 0-11000 volt with 3 way and OFF selector switch.
1- Square Ammeter of 96 x 96 mm scaled 0-75 amps with 3 way and OFF selector switch.
1 no. energy analyser to measure voltage, current, power factor, frequency,kW/kVA, kWh, kVArh, kVAh,Real time,date with communication module.
-
-
-
... More
1- Triple pole numerical I.D.M.T. over current and earth fault relay, with two outer elements connected for over current and the middle element for earth fault protection, over current setting 50% - 200%, Earth fault setting 20% -80% and with instantaneous element on all 3 pole settings 500-2000% on over current and 200-800% on earth fault (51, 50, 51N & 50N)
1 - Electro mechanical Master trip relay (86)
1 - Electro mechanical Anti pumping relay (94)
1 - Trip Circuit supervision relay.
1- set Electro mechanical auxiliary relay for transformer fault ALARM for winding temperature conditions (63x)
1 - no. circuit breaker control switch for electrical (T/N/C)
1 - push button on front door for emergency trip
1- set of Red/Green indicating lamps for close and open position
1- Amber indicating lamp for auto trip 1- clear indicating lamp for trip circuit healthy
1- set of white indicating lamps one per phase 1 - blue indicating lamp for spring charged
incoming & outgoing - cable termination suitable for Raychem make cable joint to receive 11 KV XLPE cable 3 core 300 sqmm
The switchboard shall be complete with all interconnections, label wiring, etc as required and as per direction
Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries for the panel
11 KV Single panel VCB (Incoming cum outgoing)Switchboard as described above
1
-
-
... More
Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 63 Amps DP MCCB as incomer and 12 Nos. 20/16A DP MCB's (D.C. duty) as outgoing complete as required and as per technical specifications.
2
-
-
... More
11/.433 KV TransformerSupply, installation, testing and commissioning of 500 kVA, 11000/433 volts Deta/Star, vector group DYN11, outdoor mounting, oil cooled, ONAN transformer with On Load Tap Changers (OLTC) having AVS relay and RTCC for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote manual operation of OLTC, suitable for incoming voltage variation of +5% to –15% in 16 steps to give a constant secondary voltage. The transformer shall be provided with fittings, accessories, protection, first filing of oil etc. including Buchholz oil temperature alarm/trip protection in LV chamber complete as per specifications and as required. The transformer shall be provided with arrangement to terminate XLPE cable on HT side and to connect Aluminium Bus Duct on LT side, complete as required. The losses of the Transformer should be as per latest ECBC guideline or As per Latest IS:1180 & Transformer efficiency type -2.
1
-
-
... More
Supply, installation, testing & commissioning of 500 KVA continuous rating,silent type (Prime Rating) radiator cooled diesel generating set alongwith complete fuel oil piping, antivibration mounts, base frame, required hardware, Batteries, Engine control panel with accessories, residential silencer, flexible connection, bellow / expansion joints etc.complete with all associated equipment / work as per specifications or requirements as per site.
DG set shall be supplied with built in acoustic enclosure as per pollution control board norms and as per specification complete in all respect.The DG Set shall be complete with PCC (Power Command Control) or equivalent DG Controller module suitable for AMF (auto-mains failure), Auto Load Sharing & Interface with PLC mounted in the LT panel for ACB/MCCB switching and Auto load sensing and Auto load Management, including communication card and networking gateway and software as required. Note: Item rate shall be include 1st time filling of Lube oil & diesel and also include the cable termination box suitable for termination of 4 Runs 3.5 C X 300 Sqmm. XLPE AL cables at alternator.
Battery charger for 1X500 KVA DG sets Supply, installation, testing & commissioning of Battery Charger as described in Specifications and described below:
RatingAC Input: 230 V + 10% AC 50 Hz single phase.
DC Output: To float / boost charge the batteries (with required AH as per D.G. rating) and also supply a continuous load or as per offered DG set requirement.Current Rating: 30 AFloat Mode: 27.0 V nominal (Adjustable) between 24-28.0 V.
Boost Mode: 29.0 V nominal (Adjustable) between 24-32.0 V
Voltage Regulation:+ 2% for AC input variation of 230 V + 10%. Frequency Variation of 50 Hz + 5% and DC load variation 0-100%
Ripple:Less than 5%
Battery Charger Unit as described above
Day Oil Tank
1
-
-
... More
Supply, installation, testing & commissioning of 990 litres capacity day oil storage tank fabricated from 6 mm thick MS plates. Tank shall include 450 mm ID manhole cover, level indicator with duly calibrated scale and flanged connection for inlet, outlet, overflow drain and probe provision for level controller & breather.
1
-
-
... More
Supply, installation, testing & commissioning of the following MS class ‘C’ pipes cut to required lengths and installed with all welded joints. Providing the necessary fittings like elbows, tees and reducers, sockets, hot dip galvanized supports and accessories including ceiling Hanger, Hardware complete as per site requirement.25 mm dia MS pipes
45
-
-
... More
Supply, installation, testing & commissioning of the following MS class ‘C’ pipes cut to required lengths and installed with all welded joints. Providing the necessary fittings like elbows, tees and reducers, sockets, hot dip galvanized supports and accessories including ceiling Hanger, Hardware complete as per site requirement.Providing 25 mm dia. ball valves
3
-
-
... More
Supply, installation, testing & commissioning of MS class-C exhaust pipe as per IS 1239 and all fixing accessories and hardwares. The exhaust pipes shall be insulated with 75 mm thick mineral wool (density 150 kg/m3) insulation wrapped in chicken mesh and clad with 26 gauge aluminium sheet including all hot dip galvanized support structural as required.300 mm dia MS class-C pipe & 75mm thick mineral wool insulation as per description given :300 mm dia MS class-C pipe & 75mm thick mineral wool insulation as per description given above. Contractor should furnish calculation for exhaust piping size for approval by the Consultant. The system should meet the performance of the engine without exceeding the back pressure limit prescribed by engine supplier.
20
-
-
... More
Supply, installation, testing & commissioning of MS class-C exhaust pipe as per IS 1239 and all fixing accessories and hardwares. The exhaust pipes shall be insulated with 75 mm thick mineral wool (density 150 kg/m3) insulation wrapped in chicken mesh and clad with 26 gauge aluminium sheet including all hot dip galvanized support structural as required.300 mm dia MS class-C pipe & 75mm thick mineral wool insulation as per description given 180 mm dia MS class-C pipe & 75mm thick mineral wool insulation as per description given above.Contractor should furnish calculation for exhaust piping size for approval by the Consultant. The system should meet the performance of the engine without exceeding the back pressure limit prescribed by engine supplier.
14
-
-
... More
Supply, installation, testing & commissioning of miscellaneous structural support (MS angle iron / MS Plates / MS Channel etc.) for horizontal/vertical exhaust piping at suitable interval as per approved Shop drawing including fabrication, hardwares / flanges and painting (2 coats of primer and 2 coats of enamel paint) complete in all respect.
660
-
-
... More
Supply, installation, testing & commissioning of 300 mm dia Flexible Bellows
2
-
-
... More
Supply, installation, testing & commissioning of 180 mm dia Flexible Bellows
1
-
-
... More
Supply, installation, testing & commissioning of Thermal Cladding of Silencers
1
-
-
... More
Supply, installation, testing & commissioning of following 1100 volt grade XLPE PVC insulated sheathed copper conductor armoured cable including supplying of bimettalic crimping lugs, double compression glands with earthing. as per specification.4 C x 2.5 sq.mm control cable
30
-
-
... More
Supply, installation, testing & commissioning of following 1100 volt grade XLPE PVC insulated sheathed copper conductor armoured cable including supplying of bimettalic crimping lugs, double compression glands with earthing. as per specification.12 C x 2.5 sq.mm control cable
10
-
-
... More
Supply, installation, testing & commissioning of all materials and making terminations of control cable terminations for control cables as per item 7.6 above complete with single brass compression glands, copper lugs etc. as required: 4 C x 2.5 sq.mm control cable
10
-
-
... More
Supply, installation, testing & commissioning of all materials and making terminations of control cable terminations for control cables as per item 7.6 above complete with single brass compression glands, copper lugs etc. as required:12 C x 2.5 sq.mm control cable
30
-
-
... More
LT PANELS & DISTRIBUTION BOARDS
The contractor shall consider the following details in their item rates, wherever required:
Supporting rigid steel framework.
Cubicle type, 14 gauge CRCA sheet steel enclouser.
Complete with interconnections and distribution bus bars.
Proper bonding to earth.( at two Points)
Painting/lettering on Breakers and distribution boards, the location they serve, providing on each panel its circuit diagram.Providing cable clamps / supports within distribution boards cable alley.
TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link.
All MCB’s shall be of minimum 10 KA breaking capacity.
All motor feeders MCCBs shall be of motor duty.
Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.
Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-1993.
IP 42 for indoor panels.
IP 54 for kitchen and laundry panels.
IP 55 for outdoor panels
-
-
-
... More
All MCCB’s shall be provided with operating mechanism for door interlock.
Current density of aluminium shall be 1 sq mm for 1.0 amps for rated current of bus bars and current density of copper shall be 1 sq.mm for 1.25 amps for rated current of bus bars.
Tinned copper earth bus shall be provided through out the length of each board.
All measuring instruments (Meters) shall be of digital electronic with LED of approved make and compatible with BAS.
All hinged door shall be earthed through 4.0 sq mm tinned braided copper wire.
All panels shall have provision of the following:
Pad locking of Switch board doors.
Pad locking of MCCB’s handles in “OFF” Position.
Additional set of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for BAS including space required for various transducers in Main Switch Board sections. Only transducers shall be supplied by BAS contractor.
All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic and inductive (motor) load shall be of type “C” characteristic and discharge lamps and UPS etc. shall be of type D characteristic. All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier formation.
All PTs / control transformer shall be provided with centre tap earth secondary.
All DOL & Star-Delta Starters shall be provided with SPPR (single phase preventor relay) and 2 nos. of Aux.Contacts for Remote operation/monitor.
The Panel fabricator shall provide Al./ Copper Bus-bars link from Breakers wherever more than two nos. of cables are terminated in the breakers.Readymade 16 SWG Sheet steel Enclosure with cutout For MCBs
The breaking capacity of MCCB’s are mentioned panel wise. All MCCB’s shall be with thermal magnetic releases upto 250 amps and miroprocessor based above 250 amps capacity, unless specified otherwise.
-
-
-
... More
ACB shall comply with standards IS/IEC 60947-1 & 2
ACB shall have a rated operational voltage of 415V AC, rated insulation voltage of 1000 volts AC, rated impulse voltage of 12kV. ACB shall have a Ready to close mechanism preferably having a ready to close mechanical indication on front of ACB. All EDO ACBs ready to close indication contact
ACBs upto 3200A shall be provided with top horizontal and bottom vertical terminal adapters on both sides for proper cable connections/bus duct connections. MCCB shall have a rated operational voltage (Ue) of 415V, insulation voltage (Ui) of 690 V (AC 50/60 Hz) & impulse voltage (Uimp) of not less than 8kV. MCCBs shall be current limiting type having a double break design Protection Releases Microprocessor based (PRMB) & Thermal magnetic (PRTM) shall be as described below .
Protection Release Microprocessor Based (PRMB-1) For ACB
Over-current/long time protection range 40% - 100 % with Time setting
short circuit /short time protection range 100% - 1000 % with Time setting
Instantaneous short circuit Protection range 150% - 1200 % with Time setting
Earth Fault Protection range 20% - 100 % with Time setting
ZSI(Zone Selectivity Interlocking)
Measurements
Voltage
Current Energy
Protection Release Microprocessor Based (PRMB-3) For MCCB
Overload protection short circuit protection
Protection Release Thermal-Magnetic Based (PRTM) For MCCB
Over-current
Short circuit
-
-
-
... More
Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 25 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks and including GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below.
(Note:The contractor may select the next higher fault rating of MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maximum fault level of the panel).MAIN LT Panel IP:42 INCOMER FROM TRANSFORMER
BUSBAR-1
From 500 KVA Transformer
1 No. 800A 4 pole microprocessor based EDO, ACB(50kA) with integral protection as per PRMB-1 mentioned in Premable
1 set of 800/5A, 15 VA, class-1 CTs for APFC relay
1 set of R,Y,B phase indicating lamps each with 1 nos. 2A SP MCBs.
1 No. (0-500V) Voltmeter with Built-in VSS with 1 nos. 2A SP MCB
1 No. (0-800A) Ammeter with ASS with 1 nos. 800/5A CT's
1Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.
240 V AC Motor wound spring closing mechanism
1 - 24 volts DC shunt trip coil
6 nos NO/NC contacts for remote opening & closing
Terminals to receive XLPE insulated Aluminium cables
Class – B transient voltage surge suppression devices suitable for 3 phases as per specification.
Multifunction meter with display of V,I,PF,Energy,Power, Harmonics up to 15th order & %THD with RS485 port
One set of 1 nos. 800/5A CT's for metering
INCOMER FROM DG Set
-
-
-
... More
From 500 KVA DG SET
1 No. 800A 4 pole microprocessor based EDO, ACB(50kA) with integral protection as per PRMB-1 mentioned in Premable
1 set of R,Y,B phase indicating lamps each with 1 nos. 2A SP MCBs. 1 No. (0-500V) Voltmeter with Built-in VSS with 1 nos. 2A SP MCB1 No. (0-800A) Ammeter with ASS with 1 nos. 800/5A CT's
1 Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.240 V AC Motor wound spring closing mechanism6 nos NO/NC contacts for remote opening & closing
Terminals to receive XLPE insulated Aluminium cables
Class – B transient voltage surge suppression devices suitable for 3 phases as per specification.
Multifunction meter with display of V,I,PF,Energy,Power, Harmonics up to 15th order & %THD with RS485 port
One set of 1 nos. 800/5A CT's for meteringBUS BARSElectrolytic high conductivity Aluminium three phase and neutral busbars with earthing rated at 1000 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 50 kA at 415 volts. The neutral busbar is to be of 50% capacity.
OUTGOINGS-
2No. 400A TP+NL MCCB (36 KA) complete with:
1 nos 400/5A Class - 1.0, 15 VA Burden CT's for metering ON / OFF indicating lamps with MCB as backup protection.
Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified.
2No. 250A TP+NL MCCB (25 KA) complete with:
1 nos 100/5A Class - 1.0, 15 VA Burden CT's for metering ON / OFF indicating lamps with MCB as backup protection.
Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified.3No. 100A TP+NL MCCB (16 KA) complete with:
1 nos 63/5A Class - 1.0, 15 VA Burden CT's for metering ON / OFF indicating lamps with MCB as backup protection.
Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified.3No. 63A TP+NL MCCB (16 KA) complete with:
-
-
-
... More
BUS COUPLER:-
1 No. 800A FP ACB (50 KA) with PRMB-1 with Microprocessor Based release with all required accessories.
1 Set of Breaker ON-OFF-TRIP, Spring charged indication Lamps as required.
BUSBAR
PLC PLC FEEDER- AUTO ON/OFF AND AUTO LOAD MANAGEMENT :
"Hardware using PLCs for Monitoring of all Electrical Software and for operations, controlling and interlocking Parameters of 2 Nos. DG & 1 Nos. Transformer with Window based software & Engineering & Software Development. Required Aux. Relays, Push Buttons & Indication lamps, 1KVA UPS for Black start & maintenance free Batteries, Power monitors, Programmable Logic controller, Annunciator and status Fascia, MIMIC with LED circuit etc as required completing the system.(As per SLD).
The Switchboard with Logic control panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as required. Note: Incomer from LT Supply, D.G. set & Bus coupler shall be electrically & mechanically interlocked. Main LT Panel as described above
1
-
-
... More
Capacitor Panel (170 kVAR)
IP:42 INCOMER
1 No. 630A TPN ACB (50 KA) as per PRMB-1 as mentioned in Preamble.
METERING & INDICATION
1 set of phase indicating lamps
1 No. 10 step-Microprocessor APFC controller/Relay(Dual source purpose) shall continuously monitoring all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand, KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232/RS 485 port. Controller should mounted on the front side of the panel. Capacitor bank having 3 phase MPP based mix dieelectric low loss ISI marked power capacitor and provided with contactor based switching to suppress switching of inrush current and reducing harmonics capacitor life. BUS-BAR
1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS2 Nos.of 125A TP MCCB (25 KA) each with PRTM
2 Nos. 50 KVAR capacitor Bank each with 7% harmonic & discharge resistor with thyristor module suitable capacity to carry expected current continuosly.5 Nos.of 63A TP MCCB (25 KA) each with PRTM
5 Nos. 25 KVAR capacitor Bank each with 7% harmonic & discharge resistor with thyristor module suitable capacity to carry expected current continuosly.5 Nos.of 32A TP MCCB (25 KA) each with PRTM
5 Nos. 10 KVAR capacitor Bank each with 7% harmonic & discharge resistor with thyristor module suitable capacity to carry expected current continuosly.
Capacitor Panel (170 kVAR) as described above
1
-
-
... More
FLOOR PANELS
INCOMER
1 No. 250amps 4P MCCB(25KA) with thermal Magnetic release (PRTM) with Class-C transient voltage surge suppression device suitable for 3 phases as per specifications.
METERING & INDICATION for each Incomer
1 set of R,Y,B phase indicating lamps
Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD) with RS-485 Port.
Sets of 250/5A, CL-1, 15VA CTs for measuring.
Sets of phase indicating lamp with 2A control MCBs.
BUS-BAR
200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
8 No. 40amps FP MCB
8 No. 63amps FP MCB
FLOOR PANEL AS DESCRIVED ABOVE
1
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
14
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
8
-
-
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
140
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe FRLSom earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
100
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
100
-
-
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
80
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
300
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
100
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
100
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
50
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
20
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
24
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
28
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
Upto 35 sq. mm
120
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
100
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
50
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
50
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
-
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
30
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
50
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
30
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
30
-
-
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
30
-
-
... More
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
20
-
-
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
20
-
-
... More
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
15
-
-
... More
Laying of one number XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.Above 120 sq. mm and upto 400 sq. mm
15
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
3½ X 185 sq. mm (57mm)
6
-
-
... More
3½ X 240 sq. mm (62mm)
3
-
-
... More
3½ X 300 sq. mm (70mm)
2
-
-
... More
4 X 10 sq. mm (25mm)
6
-
-
... More
4 X 16 sq. mm (28mm)
6
-
-
... More
4 X 25 sq. mm (28mm)
8
-
-
... More
3½ X 50 sq. mm (35mm)
4
-
-
... More
3½ X 70 sq. mm (38mm)
5
-
-
... More
3½ X 95 sq. mm (45mm)
4
-
-
... More
3½ X 120 sq. mm (45mm)
5
-
-
... More
3½ X 150 sq. mm (50mm)
3
-
-
... More
2 X 6 sq. mm (19mm)
8
-
-
... More
2 X 10 sq. mm (19mm)
2
-
-
... More
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.300 sq. mm
7
-
-
... More
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.300 sq. mm
1
-
-
... More
Supplying of following sizes of XLPE aluminium conductor, corss linked polythylene, individual core screwed, flat steel strip armoured, PVC sheathed cable of 11KV grade (earthed) comforming to IS: 7098 (Part 2),with uptodate ammendment complete as required.3 C x 300 Sq.mm XLPE HT cable (Earthed)
150
-
-
... More
Supply, following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor/copper conductor power/ multicore control armoured cable of 1.1 KV grade.
-
-
-
... More
3 ½ C - 300 sq mm Aluminium
150
-
-
... More
3 ½ C - 240 sq mm Aluminium
60
-
-
... More
3 ½ C - 185 sq mm Aluminium
20
-
-
... More
3 ½ C - 150 sq mm Aluminium
10
-
-
... More
3 ½ C - 120 sq mm Aluminium
60
-
-
... More
3 ½ C - 95 sq mm Aluminium
20
-
-
... More
3 C - 70 sq mm Aluminium
20
-
-
... More
3 ½ C - 50 sq mm Aluminium
50
-
-
... More
3 ½ C- 35 sq mm Aluminium
50
-
-
... More
4C- 25 sq mm Aluminium
20
-
-
... More
4C- 16 sq mm Aluminium
30
-
-
... More
4C- 10 sq mm Aluminium
30
-
-
... More
4C- 6 sq mm Aluminium
30
-
-
... More
3C- 6 sq mm Aluminium
20
-
-
... More
3C- 10 sq mm Aluminium
20
-
-
... More
2C- 6 sq mm Aluminium
50
-
-
... More
Demolishing cement concrete manually/ by mechanical means including Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix),brick work In cement mortar manually/ by mechanical means, Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, arcTaking out doors, windows and clerestory window shutters (steel or wood) architrave, holdfasts etc. complete of all area and sizes, wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height, tile work in floors and roofs laid in cement mortar, wooden boardings in lining of walls and partitions, excluding supporting members, G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means, old plaster or skirting raking out joints and cleaning the surface for plaster, aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling etc, any underground piping of any size and diameter, electrical items f any nature , electrical equipments, cables, RCC tanks, PCC of any grade, including any item herein not mentioned but required for clerance of site including Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, upto any lead including all lifts involved. and stacking as per the instruction of Engineer in charge
-
-
-
... More
Demolishing/Dismantling of Sub Structure
1
-
-
... More
Demolishing/Dismantling of Super Structure
1
-
-
... More
Disposable of unserviceable material at municipal ground
1
-
-
... More
Stacking of serviceable material as per direction of Engineer in charge
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements