WAPCOS Limited Tender
... More
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 75,87,814Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_WAPCO_171693_1Bid Award Id
ViewTender No
WAP/INFS4/LAD/ SPORTS /23-24/02Tender Authority
WAPCOS Limited ViewPurchaser Address
-Website
http://http://www.wapcos.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
All kinds of soil.
53594.13
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
-
-
-
... More
All kinds of soil
-
-
-
... More
1.5m to 3.0m
5857.72
-
-
... More
3.0m to 4.5m
5594.2
-
-
... More
4.5m to 6.0m
5594.2
-
-
... More
6.0m to 7.5m
5594.2
-
-
... More
7.5m to 9.0m
5594.2
-
-
... More
9.0m to 10.50m
5681.09
-
-
... More
10.50m to 12.0m
45.7
-
-
... More
Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exc
-
-
-
... More
All kinds of soil.
-
-
-
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
164.05
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
26895.83
-
-
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
429.8
-
-
... More
Disposal of excavated excess earth away from the site including conveyance of materials up to an average lead of 5KM away from the site, and correspondiong required lift, loading, unloading etc complete as directed by the Engineer-in-charge. (The quantity is net quantity of capacity of truck after deduction of 20% for looseness)(considering the maximum disposal location at 5 KM distance) By mechanical transport including loading, unloading and stacking. (Lead upto 5KM away
17729.05
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
188.62
-
-
... More
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (in all kinds of soil)
6015.58
-
-
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
70
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified
-
-
-
... More
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
1150.35
-
-
... More
Anti termite treatment
-
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
134.05
-
-
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
5449.99
-
-
... More
CONCRETE WORKS
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
81.31
-
-
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
1282.35
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
-
-
-
... More
1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
1
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns.
560.3
-
-
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
69.09
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
16.89
-
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
67.09
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
98.7
-
-
... More
REINFORCED CEMENT CONCRETE WORK
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete.
690.41
-
-
... More
Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.
1552.22
-
-
... More
Suspended floors, roofs, landings, balconies and access platform.
4640.42
-
-
... More
Shelves (Cast in situ)
3.16
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
2689.99
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
1907.23
-
-
... More
Stairs, (excluding landings) except spiral-staircases.
236.47
-
-
... More
Arches, domes, vaults up to 6 m span
15
-
-
... More
Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
8.69
-
-
... More
Edges of slabs and breaks in floors and walls
-
-
-
... More
Under 20 cm wide
748.41
-
-
... More
Weather shade, Chajjas, corbels etc., including edges.
20
-
-
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
... More
Suspended floors, roofs, landing, beams and balconies(Plan area to be measured)
175.47
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
818325.32
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
56368.07
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
-
-
-
... More
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cementcontent, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
... More
All works upto plinth level.
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
5049.37
-
-
... More
Concrete of M30 grade with minimum cement content of 350 kg /cum
164.03
-
-
... More
All works above plinth level upto floor V level.
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
294.1
-
-
... More
Concrete of M30 grade with minimum cement content of 350 kg /cum
75.24
-
-
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
1094.35
-
-
... More
BRICK WORK
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
146.73
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
232.96
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
-
-
-
... More
Cement mortar 1:4 (1 cement :4 coarse sand)
5
-
-
... More
Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level.
-
-
-
... More
cement mortar 1:4 (1 cement : 4 coarse sand)
236.71
-
-
... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry (with F.P.S. bricks).
251.71
-
-
... More
Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand)
12
-
-
... More
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
138.27
-
-
... More
Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level.
-
-
-
... More
cement mortar 1:4 (1 cement : 4 coarse sand)
10
-
-
... More
MARBLE & GRANITE WORKS
-
-
-
... More
Providing and fixing 18mm thick gang saw cut ( premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
-
-
-
... More
Granite of any colour and shade
-
-
-
... More
Area of slab upto 0.50 sqm
27.49
-
-
... More
Area of slab over 0.50 Sqm
3.16
-
-
... More
Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150mm with epoxy resin baesd adhesive including cleaning etc. complete.
6.46
-
-
... More
Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/Stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edge etc. complete.
5
-
-
... More
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick
-
-
-
... More
Granite of any colour and shade
875
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.: Granite Stone of approved shade
325.9
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
318.36
-
-
... More
Providing and Fixing stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 meter height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately)
-
-
-
... More
18 mm thick mirror/ eggshell polished granite stone of approved shade.
314.51
-
-
... More
WOOD & PVC WORK
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
-
-
-
... More
Second class teak wood.
3.22
-
-
... More
Factory made single extruded WPC (Wood Polymer Composite) solid door/window, clerestory windows & other Frames/Chowkhat of frame size 65 x 125 mm
235
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
-
-
-
... More
1.0 mm thick
187
-
-
... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I
fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
-
-
-
... More
Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)
192
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 8 mm thickness (weight not
less than 20 kg/sqm)
135
-
-
... More
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks,
-
-
-
... More
75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) board conforming to IS: 2095: (part 3) : 1996 (Board with BIS certification marks)
188.4
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
133.14
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
133.14
-
-
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :2nd class teak wood.50x12 mm.
231.4
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
... More
Fixed to steel windows by welding
90
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
319
-
-
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :
-
-
-
... More
300x16 mm
2
-
-
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
-
-
-
... More
150x10 mm
8
-
-
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
-
-
-
... More
100 mm
8
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
72
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
... More
300x16 mm
40
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
300x10 mm
144
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
125 mm
144
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
Single rubber stopper
55
-
-
... More
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.
4
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
-
-
-
... More
1.0 mm thick
265.28
-
-
... More
Providing and fixing steel roller for uPVC / aluminium sliding window with necessary screws etc. complete.
22
-
-
... More
Providing and fixing steel (white power coated) crescent lock for uPVC / aluminium sliding window/ door with necessary screws etc. complete.
22
-
-
... More
Providing and fixing factory fabricated steel almirah type shutters to cupboards with or without vision panel, single or double leaf (partly glazed/flush CRC sheet type) as per approved sample with all round frame made of CRC sheet moulded by machine press with following specifications: (i) Door frame using 1.219mm (18 gauge) CRC sheet moulded to required profile. The frame should be fixed to the wall with dash fastners of suitable size at site. (ii) Openable flush shutter single or double leaf/openable glazed shutter, ribbed/moulded at edges to required profile all round made of CRC sheet 1.219mm thick fixed with the frame with required MS hinges with suitable CRC SHEET supporting brackets rivited/welded with the frame and shutter with CRC sheet 1.219mm thick vertical boxing riveted or welded of approved profile to back face to strengthen the shutter. (iii) Providing and fixing glazing in fully/partly glazed shutter with PVC gasket with beading welded/screwed of required size and shape with glass panes of 4.00mm thickness(weight not less than 10.00 kg/sqm.) (iv) Grinding the joints and surface wherever required and applying steel primer putty i/c. sand papering so as to give truly smooth surface for spray painting . The internal and external metal surface of the door and fittings except glass shall be spray painted with synthetic enamel paint of approved brand and manufacture of required shade etc. complete as per the direction of the engineer in charge. (Overall elevation area of the shutter with frame will be measured for payment).
90
-
-
... More
Providing and fixing approved brand and manufacture of Rack and pinion door closer TS 68 EN size 2/3/4, with std. arm and with two independent closing valves and latching speed adjustable by arm. Silver finish. As per EN 1154. Approved Make : dormakaba / Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
18
-
-
... More
Providing and fixing approved brand and manufacture of 4012 wall mounted door stop dome with 60mm length with fixing accessories Approved Make : dormakaba / Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
12
-
-
... More
Providing and fixing approved brand and manufacture of Pure 8100 Type 3 Package with Pair of Pure 8100 Design Lever Handle on Roses & escutcheons. Including 271a Sash lock with 72mm CTC, 55mm Backset 20mm Square forend. EPC 60mm length oneside thumb turn otherside coin release operation Approved Make : dormakaba / Hafele / GEZE with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
12
-
-
... More
Providing and fixing approved brand and manufacture of Stainless Steel Tower bolt 300 mm long with 10 mm dia ( TR 1210SS) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
18
-
-
... More
Providing and fixing approved brand and manufacture of Stainless Steel Tower bolt 150 mm long with 10 mm dia ( TS 610SS) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
18
-
-
... More
Providing and fixing approved brand and manufacture of Stainless Steel Door Buffer wall mounted 22 mm dia,75 mm long (DB (22) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
18
-
-
... More
Providing and fixing approved brand and manufacture of Stainless Steel Handle 125 mm long with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
88
-
-
... More
Providing and fixing approved brand and manufacture of Stainless Steel Sliding Tower Bolt 300x16 mm long with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.
18
-
-
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows, Doors and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With aluminium Snap beading.
137.63
-
-
... More
STEEl WORK
-
-
-
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces.
5
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
... More
80x1.25 mm M.S. laths with 1.25 mm thick top cover
7
-
-
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
-
-
-
... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
50
-
-
... More
Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws instead of glazing clips and metal sash putty, in steel doors, windows, ventilators and
composite units.
10
-
-
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
17277.54
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50671.59
-
-
... More
Providing and fixing bolts including nuts and washers complete.
1223.13
-
-
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required
-
-
-
... More
In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete.
5075
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
3075
-
-
... More
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide
PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
-
-
-
... More
10 x 60 mm
357
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
2045.26
-
-
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
-
-
-
... More
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
86
-
-
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
-
-
-
... More
4.0 mm thick glass panes
6
-
-
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
-
-
-
... More
With 20x20 mm square bar
149
-
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality H D - 20
-
-
-
... More
Circular shape 560 mm internal diameter
14
-
-
... More
FLOORING WORK
-
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.: 40mm thick with 20mm nominal size stone aggregate.
466.39
-
-
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement.
-
-
-
... More
18 mm thick
314.8
-
-
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles,including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement.
10.8
-
-
... More
Extra for pre finished nosing to treads of steps of marble / granite stone.
338.92
-
-
... More
Extra for marble / granite stone flooring in treads of steps and risers using single length up to 2.00 metre.
173.73
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick :
103
-
-
... More
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
6
-
-
... More
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
6
-
-
... More
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre.
5
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
93
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
39
-
-
... More
Providing & Laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer) with water absorption's less than 0.08% and confirming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc, complete.: Size of Tile 600x600 mm
94.75
-
-
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including
grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
... More
Glazed Vitrified tiles Matt/Antiskid finish of size
-
-
-
... More
Size of Tile 600 x 600 mm
549.7
-
-
... More
Size of Tile 1000 x 1000 mm
351
-
-
... More
Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.
600
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting / dado, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.: Size of Tile 600x600 mm
252.15
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent.
694.2
-
-
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable ,separately).
255.14
-
-
... More
Providing and laying Unbacked flexible P.V.C /marblex flooring/ skirting with P.V.C sheets/ Marblex tiles as specified below of approved make and shade including preparing the surface, cleaning as required and applying adhesive - as recommended by the P.V.C / Marblex tile manufacturers, laying, aligning, cutting in required size and pattern, trimming of tiles, removing the adhesive stains on the surface including cleaning the surface with soap solution (2 table spoons of soap powder for 5 ltrs of water) using a cloth or mop or and wiping the dried surface with soft dry cloth etc; complete all as per specifications.In PVC flooring/ skirting/ dadoing: With 2mm thick Unbacked flexible fully homogeneous PVC sheets in rolls of approved make and quality - viz Poly floor of M/s. Poly floor vinyl flooring or TUSKER of M/s. Krishna vinyls Limited or Birla vinoleum of M/s Birla corporation Limited or equivalent make conforming to IS: 3462-1986.
303.7
-
-
... More
Providing and fixing Badminton court floor mat as per approved design and drawing complete as directed and specified by the Engineer-in-Charge :
304
-
-
... More
Sportneer Badminton Net Stand Set Adjustable Height Bonus Carry Bag in black and red colour (H -2.5-5ft L- 10.5-17ft)
2
-
-
... More
ROOFING
-
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
252.62
-
-
... More
Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).
912
-
-
... More
Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick, wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building.
127.02
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
12
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC RAIN WATER PIPES conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.
-
-
-
... More
110 mm diaMeter
4
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler
-
-
-
... More
110 mm
1
-
-
... More
Bend 87.5°
-
-
-
... More
110 mm bend
1
-
-
... More
Shoe (Plain)
-
-
-
... More
110 mm Shoe
1
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval,
-
-
-
... More
including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square
-
-
-
... More
12.5 mm thick tapered edge gypsum moisture resistant board.
408.85
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
-
-
-
... More
GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
252.18
-
-
... More
Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183,density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building.
1170.96
-
-
... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge.
-
-
-
... More
With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6
575.16
-
-
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1170.96
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self drilling/ self tapping screws complete :
-
-
-
... More
Ridges plain (500 - 600mm)
54.57
-
-
... More
Gutter (600 mm over all girth)
152.05
-
-
... More
Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately).
325.5
-
-
... More
Supply, fabrication of MS frame consisting of M.S. pipes, base plates & normal anchors. The frame shall be welded and grinded to smooth finish as per drawing. 1- Painting- The MS frame shall be cleaned of girt/grim and oil/grease deposit. The frame shall be sand papered to remove rust. The frame shall be painted with PU primer to finish. After primer the frame, NC putty shall be applied over the frame and it will be wet sand papered to a smooth glossy finish. The ready surface will be painted 2 coats of PU paint 2 -Fabric: Providing & fixing of Fabric- Fabric Ferrari 902 over frame including wire rope and plates. The fabric will be welded to shape and pattern. The joint shall have weld width of 40mm. The joint will have a homogeneous welded of 40 mm The fabric shall be installed, tensioned using a tensioning device and shall not sag at any point. the fabric will be fixed on the frame with fixing accessories like aluminium section with powder coated top covers, self drilling screws.
24
-
-
... More
Finishing Work
-
-
-
... More
12mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
5308.19
-
-
... More
15 mm cement plaster on rough side of single or half brick wall of mix :
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
131
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).
5616.28
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
131
-
-
... More
Add or deduct for plaster drip course/ groove in or moulding to R.C.C. projections.plastered surface
230
-
-
... More
6 mm cement plaster of mix :
-
-
-
... More
1:3 (1 cement: 3 fine sand)
5343.5
-
-
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
2631.02
-
-
... More
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part hereof.
250
-
-
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats.
1968.42
-
-
... More
Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre
2078.42
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat with cement primer
2211.42
-
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer.
1968.42
-
-
... More
Finishing walls with textured exterior paint of required shade :
-
-
-
... More
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
2488.48
-
-
... More
Applying priming coat:
-
-
-
... More
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
10
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
6299.33
-
-
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
... More
Two coats
110
-
-
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work.
2434.89
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
117
-
-
... More
Melamine polishing on wood work (one or more coat).
59.01
-
-
... More
Providing and fixing GI hexagonal chicken wire mesh of size 12mm x22g at the junction of disimilar surfaces of brick masonry wall and R C C column by beams and the like including necessary nails for fixing etc, complete all as per specification and direction of Engineer -in -charge for all floor at all heights.
561.63
-
-
... More
Providing and fixing Glass Reinforced Concrete (G.R.C) Screen at all levels & heights in approved size, pattern, design, thickness (minimum 35mm) and color. The Screens should be made from White Portland Cement, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber, Super Plasticizers, Polymers and U.V resistant Synthetic inorganic pigments should be used for pigmentation. The material casting should take place in Synthetic Rubber / FRP Mould. The fixing of Jali should be ‘Dry fixing’ i.e. to be done with MS/SS ‘L’ shaped Clamps, dash fasteners and pins etc complete as per site requirment and direction of Engineer-in-charge.
526.5
-
-
... More
ROAD WORK
526.5
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
5000
-
-
... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
1125
-
-
... More
Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out
complete.
-
-
-
... More
New work (Two or more coats)
500
-
-
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
375
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
75
-
-
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).
(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
750
-
-
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
-
-
-
... More
With material conforming to Grade-II (size range 53 mm
to 0.075 mm ) having CBR Value-25
750
-
-
... More
ALUMINIUM WORK
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Glazing and paneling to be paid for separately) :
-
-
-
... More
For fixed portion.
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
4637.05
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
5012.15
-
-
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
-
-
-
... More
Pre-laminated particle board with decorative lamination on both sides
10.8
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 5 mm thickness (weight not
less than 12.50 kg/sqm)
72.84
-
-
... More
Filling the gap in between aluminium frame and adjacent RCC/Brickwork/ Stone Work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge
-
-
-
... More
Upto 5mm depth and 5mm width
203.32
-
-
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
2169
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
28.8
-
-
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, fasteners screws etc as desired. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
4288.48
-
-
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural/ curtain wall glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including :
464.01
-
-
... More
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalization & drainage and protection against fire hazard including:
-
-
-
... More
b) Fabricating and supplying serrated M.S. hot dip galvanized / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimensional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon separator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers..
-
-
-
... More
c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass
-
-
-
... More
d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
-
-
-
... More
e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge.
-
-
-
... More
The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer in-Charge.
-
-
-
... More
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural/ curtain wall glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
-
-
-
... More
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened (as approved) glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner heat strengthened (as approved) clear float glass 6mm thick, spacer tube 12mm wide, desiccants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.1.8.16 above). For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (To be fixed on extruded aluminium sections. and cost of aluminium sections to be paid in relevant item)
-
-
-
... More
(i) Coloured tinted float glass 6mm thick Heat Strengthened substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc.
464.01
-
-
... More
Extra for openable side / top hung vision glass panels (IGUs/laminated glass) including providing and supplying at site all accessories and hardware for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer in- Charge..
23.2
-
-
... More
FRAMELESS GLASS PARTITION
-
-
-
... More
Providing and fixing in position 12 mm thk Toughened Clear Glass in partition panels by using various glass fittings of approved make (DORMA / HAFELE / HETTICH) to be fixed with necessary fittings on the ceiling duly finished without giving any load on the false ceiling by using necessary hardware of Dorma / Hafele make what ever necessary and required numbers to complete the job in all respect. Rate including cost of door opening with approval hardware such as patch fitting lock, handle etc of approved make but without cost of floor spring. Contractor is advised to submit working drawing with details of approved make patch fitting, sizes of glass panels etc and take approvals of consultants before execution of works. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge.
17.36
-
-
... More
WATER PROOFING
-
-
-
... More
All concrete should be admixed with integral Hydrophilic Crystalline Admixture c reputed makes like Bulwark. Taskmek, Penetron. Grace or equivalent for reducin permeability by more than 90% when tested as per DIN 1048 part 5 (after applying cycles of hydrostatic pressure), for self-healing of cracks up to a width of 0.40 mm, for reduced sulphate attack and for high early strength of concrete etc. This should meet the requirements Specified in the recommended dosage rate of 0.80 % complete as per manufacturer's specifications to the entire satisfaction of Engineer-in-Charge. Hydrophilic Crystalline Admixture shall also have a corrosion inhibitant property and shall be compatible with any other water reducing concrete chemical admixtures added to concrete for workability purpose. Crystalline formation shall be mix of cylindrical & circular in shape to have maximum filling of pores. The admixture used shall have manufacturer's test reports and approval mandatorily both from IIT's and IRC (Indian Road Congress).
28811.7
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
-
-
-
... More
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with
water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
176.82
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
... More
With average thickness of 120 mm and minimum
thickness at khurra as 65 mm.
439.56
-
-
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :
-
-
-
... More
3 mm thick
20
-
-
... More
Grading roof for water proofing treatment with
-
-
-
... More
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
1
-
-
... More
Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.
114
-
-
... More
Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on exterior / interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.
90
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin- charge. The product performance shall carry guarantee for 10 years against any leakage.
-
-
-
... More
For vertical surface two coats @0.70 kg per sqm
441.23
-
-
... More
For horizontal surface one coat @1.10 kg per sqm.
2667.55
-
-
... More
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
63.74
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side
shall be acceptable but no extra payment on this account shall be made.
393
-
-
... More
Frame size 65 x 150 mm
534
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
-
-
-
... More
35 mm thick
156
-
-
... More
HORTICULTURE & LANDSCAPING WORKS
-
-
-
... More
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 16 mm
50
-
-
... More
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 4.75 mm
100
-
-
... More
Fine dressing of the ground.
550
-
-
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
150
-
-
... More
Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and earth shall be paid for separately)..With grass Turf
550
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 1.2 m dia and 1.2 m deep
35
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 90 cm dia, and 90 cm deep
50
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 60 cm dia, and 60 cm deep
45
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes Holes 45 cm dia, and 45 cm deep.
25
-
-
... More
Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level. The vertical members shall consist of four nos. angle iron of size 25x25x3 mm, 1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. The vertical members shall be welded to 4 nos. 25x6 mm M. S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD/ PWD/ any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer, complete in all respect.
70
-
-
... More
Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm
90
-
-
... More
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
550
-
-
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.): Play grounds / Public parks (as per yard stick 1Mali =2.00Acre).
550
-
-
... More
Complete maintenance of shrubs (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
450
-
-
... More
Providing & fixing of White River (Stone) Pables size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.
20
-
-
... More
Providing and applying anti termite treatment of infected trees i/c all branches/leaves by spraying chemical emulsion 0.5% (Chlorpyriphos 20% EC) concentration through power spray machine (@ 100 ml Chlorpyriphos per tree i/c cost of chemical) and as per direction of officer-in-charge.and as per direction of officer-in-charge.
155
-
-
... More
Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge.
550
-
-
... More
Rose Plant Providing and Displaying plants Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.
50
-
-
... More
Providing and Displaying plants Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
35
-
-
... More
Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
65
-
-
... More
Ornamental Plants Providing and Displaying Bismarkia Palm plant 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge.
15
-
-
... More
Providing and Displaying Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge.
10
-
-
... More
Providing and Displaying Cyprus Golden plant Conical Shape 150 to 165 cm ht., with fresh and healthy Golden colour foliage in 35cm Cement Pot as per direction of the officer-in-charge.
15
-
-
... More
Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
30
-
-
... More
Providing and Displaying Ficus Long Island topiary plant well developed with fresh & healthy 5 to 6 ball specific size and shape 120 to 150 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
15
-
-
... More
Providing and Displaying Foxtail palm plant well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge.
10
-
-
... More
Providing and Displaying Golden Bottle brush Topiary plant well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.
25
-
-
... More
Providing and Displaying Latania Rubra Palm plant well developed with fresh & healthy foliage 150 to 180 cm ht. with 6 to 7 leaves in big 35 cm Cement Pot as per direction of the officer-in-charge.
20
-
-
... More
Providing and Displaying Topiary plant of Ficus Bush King well developed with fresh & healthy foliage from Top to Bottom with single piller 60 to 75 cm spread, 210 to 225 cm ht., in 35 cm Cement Tray/Cement Pot as per direction of the officer-in-charge.
15
-
-
... More
Providing and Displaying of Clerodendron inerme plant of ht. 30 cm to 40 cm multi branched in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
85
-
-
... More
Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..
120
-
-
... More
Providing and Displaying of Iresine herbstii plant, of height 20-30 cm., full of branches well developed in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge..
70
-
-
... More
Providing and Displaying of Wadelia trilobata plant,full of leaves in 15 cm size of Poly bags & as per direction of the officer-in-charge.
55
-
-
... More
Supply and stacking of Alstonia scholaris plant of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge.
65
-
-
... More
Supply and stacking of Azadirachta indica ( Neem ) plant of height 120- 130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
50
-
-
... More
Supply and stacking of Bottle palm plant of ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags as per direction of the officer-in-charge.
25
-
-
... More
Supply and stacking of Callistemon lanceolatus plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
75
-
-
... More
Supply and stacking of Delonix regia (Gulmohar) plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge
55
-
-
... More
Supply and stacking of Ficus benjamina (green) plant of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.
70
-
-
... More
Supply and stacking of Ficus bengalensis (Bargad) plant of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
65
-
-
... More
Supply and stacking of Ficus nuda plant of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.
50
-
-
... More
Supply and stacking of Ficus religiosa (Peepal) plant of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.
55
-
-
... More
Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v
40
-
-
... More
Supply and stacking of Plumeria acutifolia plant of height 150-165 cm. with 3-4 branches in big size HDPE bag as per direction of the officer-in-charge.
45
-
-
... More
Supply and stacking of Plumeria rubra plant of height 120-150 cm. with 3- 4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.
55
-
-
... More
Supply and stacking of Polyalthia longifolia (Ashok) plant of height 180- 195 cm. in gunny bag of size 30 cm as per direction of the officer-incharge.
65
-
-
... More
Supply and stacking of Eugenia jambolana (Jamun) plant of height 150- 165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
40
-
-
... More
Supply and stacking of Washingtonia filifea palm plant stem ht. 120-135 cm with 8-10 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the officer-in-charge.
45
-
-
... More
Supply and stacking of plant Euphorbia caracasana (bronze colour leaves) of height 60-75 cm. with 2-3 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.
80
-
-
... More
Supply and stacking of plant Ficus blackii (F.vivion) (bushy) of height 150- 165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.
80
-
-
... More
Supply and stacking of plant Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge.
75
-
-
... More
Supply and stacking of plant Malpighia coccigera of height 30-45 cm., multibranched in earthen pots of size 20 cm as per direction of the officer-in-charge.
110
-
-
... More
Supply and stacking of plant Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bags of size 25 cm as per direction of the officer-in-charge.
125
-
-
... More
Supply and stacking of plant Putranjiva roxburghii of ht. 60-75 cm in bag of size 20 cm as per direction of the officer-in-charge.
90
-
-
... More
Supply and stacking of plant Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.
75
-
-
... More
M.S Jali: Providing , making and fixing as per detail drawing 4 mm thick M.S Jali fixing 35x 50 mm M.S frame as per suggested pattern CNC cutting work complete. All m.s surfaces finish with paint. The work shall be done as per the specifications, sample approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, adhesives, consumable hardware & /accessories of approved make.
1300
-
-
... More
SPORTS
-
-
-
... More
Table Tennis
4
-
-
... More
Judo Mat (9m X 9m)
2
-
-
... More
Conipur HG PU flooring for Multi Purpose Hall
550
-
-
... More
Movable Basketball Poles
1
-
-
... More
Movable Badminton Poles with net
2
-
-
... More
Movable VolleyballPoles with net
1
-
-
... More
HVAC
-
-
-
... More
Supplying , Installation , Testing and Commissioning of Electric resistance immersion type Hot Water Generator made of 10 mm thick MS sheet, complete with all accessories and components, copper tube chrome plated , internally factory wired complete with electrical panel with 50 mm thick resin bonded fiber glass wool cladded with 0.8 mm Aluminium sheet on MS frame welded to generator body as per specifications and drawings.The Unit shall be complete in all respect and shall be factory tested with reports submitted and it should meet the specification,Drawing & Schedule. The unit shall be BMS compatible.
Specification:Hot Water IN 45°C, Hot water OUT 50°C, Hot Water Flow 115 GPM, Working PSI 230 PSI, Test Pressure 300 PSI, Capacity - 130KW (1W+1S)
2
-
-
... More
Supplying , installation, testing and commissioning of mentioned capacity & hot water circuit with VFD. The pumps shall be close coupled , single stage , centrifugal , end suction with back-pull out design with Dedicated microprocessor based pump controller with parallel pumping software duly downloaded, suitable to run on variable frequency drives as required and multiple differential pressure sensor / transmitters as necessary and as described in the specifications. Hence , the rotating unit can be removed and serviced without disconnecting the suction and discharge piping. The pump and base frame shall be factory assembled at the pump manufacturer’s facility. Installation instructions shall be included with pump at time of shipment. The pump manufacturer shall have complete unit responsibility.The Unit shall be complete in all respect and it should meet the specification,Drawing & Schedule. The scope of work shall include Lifting, shifting & positioning of pump at location shown on drawing.1 No. End suction/vertical split casing type pump.1 NO- Suitable HP, TEFC squirrel cage induction motor with class 'F' insulations & efficiency class IE-4, 1450 rpm synchronous speed , operating on 415 +10% volts ,3 phase , 50 Hz A.C.supply. The total sound intensity with all pumps in operation should not exceed 75 dB at a distance of 2 meters. The Pumps to be capable of providing 10% higher flow rate. All rotating parts are to be covered with an encasing. The duty point of the pump shall be defined in the pump curve. Variable secondary Panel should have One dedicated multi pump processor based pump controller with parallel pumping software duly installed.The pump selected for variable speed drive shall be capable of performing satisfactorily over a wide range of speed, allowing a speed variation from 20 % to 100 %.The pump logic controller assembly shall be listed and approved by Underwriter's Laboratory, Inc. (UL). The controller shall be specifically designed for variable speed pumping applications. Microprocessor based control panel shall have suitable hardware & software so that it can be integrated directly to IBMS with standard communicationopen protocol using backnet / Modbus as well as open IP. (All the Pump set will have their control panel with respect to the motor rating). All pumps to be provided with separate IP 54 rated variable frequency drives with integrated input disconnect switch. Control panel should also consist of cooling fan. VFD - The variable frequency drive(s) shall be pulse width modulation (PWM) type, microprocessor controlled design. VFD shall be capable of operating in voltage ranges of 240V or 415 V +/- 10% AC, three phase; at frequencies of 48 to 63 Hz. VFD shall be factory fitted and unit mounted. Min. pump efficiency at duty conditions shall be 75% (Minimum ECBC standards or ASHRAE - 90.1 standards): Lot-Expanded polystrene (T.F.Quality) insulations of not less than 75mm thick duly cladded between aluminium sheets of 0.5mm thickness and properly clamped to pump in two semicircular section as per specifications. Lot- Mounting frame work with anti vibration pads. Note- Total Head Loss given is minimum requirement for the system. Actual Head shall be calculated & confirmed by the vender at time of Bidding. 90 USGPM , 25 meter head (1w+1s)
2
-
-
... More
Supply, installation, testing, balancing and commissioning of PRESSURISED CHILLED WATER EXPANSION TANK along with necessary accessories such as air vents, Safety Valves, Pressurisation pumps and its panel , with required Support & Foundation etc. in order to keep chilled water system under pressure and to prevent entrapment of air in the system. The tank shall be precharged M.S expansion tank with replaceable heavy duty butyl rubber bladder. The tank shall have 20 mm drain and charging valve connection to facilitate the onsite charging of the tank to meet system requirement. The tank shall be fabricated as per Indian standard code for “non-fired pressure vessels” and the flanges shall be as per IS 6392-1971. For chilled/hot water application, it will be insulated with 50mm thick insulation to the specifications and cladded with 26 G-aluminium cladding. The expansion tank shall be supplied along with pressurization unit. Install Expansion tank in accordance with manufacturer’s written instructions. The drawing, schedules and specification shall be referred. The tank shall be designed to absorb the expansion forces of cooling/heating system water while maintaining proper system pressurization under varying operating conditions. The heavy duty bladder should contain system water thereby eliminating tank corrosion and water logging problems. The system should include airvent and complete as per technical specification. Tank shall be selected for 125 psi. Supply, Installing, Testing and commissioning of The pressurization unit shall consist of two nos. (1 working + 1 stand-by) high pressure pumps of suitable pressure rating mounted on M.S. frame, complete with interconnecting piping, isolation valves, NRV, Y-strainer, pressure gauge, pressure transmitter, auto-logic panel (IP 55) with dry-run protection, electrical MCB and interconnecting wiring. The unit shall be housed in powder-painted canopy suitable for external installation conforming to the specifications. The Pump Shall be BMS Compatible. 80 liters
1
-
-
... More
Supply, installation, testing, balancing and commissioning of centrifugal type air separator with required Support & Foundation for design water flow rate with a maximum pressure loss of 1 feet water gauge. The unit shall have Flanged inlet and outlet connections tangential to the vessel shell. Vessel shell diameter to be three times the nominal inlet/outlet pipe diameter. The unit shall have an internal stainless steel air collector tube. Manufacturer to furnish data sheet specifying air collection efficiency and pressure drop at rated flow. The shell shall be fabricated as per IS standrad for “non-fired pressure vessels” and the flanges shall be as per IS 6392-1971.. For chilled water application, it will be insulated with 50 mm thick insulation to the specifications and cladded with 26G-aluminium cladding.. Install Air separator in accordance with manufacturer’s written instructions.:80 NB
1
-
-
... More
Supply , Installation , testing and commissioning of factory built Double Skinned Air-handling unit Ceiling suspended type fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower with AMCA certified blower , blower section(Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 220 volts ± 10% , 50 Hz ± 5% AC supply, 6 Row deep heating coil and made of Aluminium finned Copper tube( Tube thickness not less than 0.5 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90% , Micro Vee filter upto 3 micron and 99% efficiency, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The unit come with coil mounted Ultra Violet Germicidal Irradiation (UVGI) System. The UVGI system complete with all accessories like UV lamp, wire, supports, nut bolts, electrical arrangment etc. The AHU panels shall be insulated with 25±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across heating coil shall be limited to 450 FPM maximum. The capacity of Air-handlers shall be as follows: Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding. 1000 CFM , 8 kw capacity, 6 R.D heating coil, CS AHU with 55 mm wg
1
-
-
... More
Supply , Installation , testing and commissioning of factory built Double Skinned Air-handling unit Ceiling suspended type fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower with AMCA certified blower , blower section(Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 220 volts ± 10% , 50 Hz ± 5% AC supply, 6 Row deep heating coil and made of Aluminium finned Copper tube( Tube thickness not less than 0.5 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90% , Micro Vee filter upto 3 micron and 99% efficiency, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The unit come with coil mounted Ultra Violet Germicidal Irradiation (UVGI) System. The UVGI system complete with all accessories like UV lamp, wire, supports, nut bolts, electrical arrangment etc. The AHU panels shall be insulated with 25±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across heating coil shall be limited to 450 FPM maximum. The capacity of Air-handlers shall be as follows: Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding. 1800 CFM , 12 kw capacity, 6 R.D heating coil, CS AHU with 55 mm wg
2
-
-
... More
Supply , Installation , testing and commissioning of factory built Double Skinned Air-handling unit Ceiling suspended type fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower with AMCA certified blower , blower section(Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 220 volts ± 10% , 50 Hz ± 5% AC supply, 6 Row deep heating coil and made of Aluminium finned Copper tube( Tube thickness not less than 0.5 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90% , Micro Vee filter upto 3 micron and 99% efficiency, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The unit come with coil mounted Ultra Violet Germicidal Irradiation (UVGI) System. The UVGI system complete with all accessories like UV lamp, wire, supports, nut bolts, electrical arrangment etc. The AHU panels shall be insulated with 25±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across heating coil shall be limited to 450 FPM maximum. The capacity of Air-handlers shall be as follows: Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding. 2000 CFM , 15 kw capacity, 6 R.D heating coil , CS AHU with 55 mm wg
1
-
-
... More
Supply , Installation , testing and commissioning of factory built Double Skinned Air-handling unit Ceiling suspended type fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower with AMCA certified blower , blower section(Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 220 volts ± 10% , 50 Hz ± 5% AC supply, 6 Row deep heating coil and made of Aluminium finned Copper tube( Tube thickness not less than 0.5 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90% , Micro Vee filter upto 3 micron and 99% efficiency, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The unit come with coil mounted Ultra Violet Germicidal Irradiation (UVGI) System. The UVGI system complete with all accessories like UV lamp, wire, supports, nut bolts, electrical arrangment etc. The AHU panels shall be insulated with 25±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across heating coil shall be limited to 450 FPM maximum. The capacity of Air-handlers shall be as follows: Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding.2800 CFM , 26 kw capacity , 6 R.D heating coil , CS AHU with 55 mm wg
1
-
-
... More
Supply , Installation , testing and commissioning of factory built Double Skinned Air-handling unit Ceiling suspended type fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.6 mm plain Galvanised steel sheet inside with blower with AMCA certified blower , blower section(Suitable static pressure as required , minimum 2 bend GSS/ PVC eliminators ) and blower motor TEFC type with IE-4 Class rating suitable for operation on 220 volts ± 10% , 50 Hz ± 5% AC supply, 6 Row deep heating coil and made of Aluminium finned Copper tube( Tube thickness not less than 0.5 mm) with coil section , thermostat , pre-filter section with non wovensynthetic media of 10 micron particle size with an efficiency of 90% , Micro Vee filter upto 3 micron and 99% efficiency, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package. The AHU shall be complete in all respect and drain piping as per the specification to be provided to the closest floor drain. The unit come with coil mounted Ultra Violet Germicidal Irradiation (UVGI) System. The UVGI system complete with all accessories like UV lamp, wire, supports, nut bolts, electrical arrangment etc. The AHU panels shall be insulated with 25±2 mm thick & 40 Kg/m³ density PU foam with thermal break. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confirm to standard specification. The face velocity across heating coil shall be limited to 450 FPM maximum. The capacity of Air-handlers shall be as follows: Total Static pressure given below minimum required for the system. Actual static pressure shall be calculated & confirmed by the vendor at time of Bidding. 2800 CFM , 26 kw capacity , 6 R.D heating coil , CS AHU with 55 mm wg
2
-
-
... More
Supply , Installation , testing and commissioning of factory fabricated Fan coil unit with 12 mm static pressure each complete with copper pipe connections with brass fittings , wiring with 3 pin socket plug , U-trap in drain pipe connection near FCU , 3 speed switch , fire retardant double canvas connections , 3 row deep hot water coil , three speed motor , washable filters , Stainless steel drain pan insulated with 13 mm aluminium faced nitrile rubber. Fan coil unit shall be suitable for 220 ± 10 volts , 50 Hz cycle single phase power supply , maximum RPM of motor shall be 960. The unit shall be complete with all valves, stainer & other accesssories. 2 kw heating Capacity/500 CFM, 3 row deep heating coil.
1
-
-
... More
Supply, installation, testing and commissioning of Class "B" GI piping with minimum 6 mm nitrile rubber insulation over the pipes,complete with fittings, supports,U trap arrangement,Clean Plug and included accessories for CSU as per specifications, drawings and schedule .25 mm dia
60
-
-
... More
Supply, installation, testing and commissioning of Class "B" GI piping with minimum 6 mm nitrile rubber insulation over the pipes,complete with fittings, supports,U trap arrangement,Clean Plug and included accessories for CSU as per specifications, drawings and schedule 32 mm dia
45
-
-
... More
Supply, installation, testing and commissioning of Class "B" GI piping with minimum 6 mm nitrile rubber insulation over the pipes,complete with fittings, supports,U trap arrangement,Clean Plug and included accessories for CSU as per specifications, drawings and schedule 40 mm dia
80
-
-
... More
Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting for supply & return air with all the accessories and hanging arrangement. It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting . Refer tender specification for detail description 0.63mm thick (24 guage)
380
-
-
... More
Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting for supply & return air with all the accessories and hanging arrangement. It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting . Refer tender specification for detail description 0.80mm thick (22 guage)
50
-
-
... More
Supplying, installing, testing & commissioning of GI volume control damper with minimum 1.6 mm flange and 1.8 mm blade thickness within ducts to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system as per schedules & drawings.
7
-
-
... More
Supply, installation, testing,balancing and fixing of Powder coated aluminium extruded grill with collar damper for supply air as per specification & the sizes will be as per schedules and drawing.Refer technical specification for detail description
23
-
-
... More
Supply, installation, testing ,balancing and fixing of Powder coated aluminium extruded grill for return air as per specification & the sizes will be as per schedules and drawing.
23
-
-
... More
Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.
8
-
-
... More
Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.
8
-
-
... More
Supplying, Installing, testing and commissioning of powder coated extruded aluminium exhaust and Fresh air louvers with min. 60 % free area, with metallic frame work & fixing accessories, to be fixed on external wall to exhaust air from building area to ambient , it shall be suitable for exhausting / fresh required air in CFM . Louvers need to be suitable in order avoid rain water entry in to building @ 15 degree deflection with bird screen complete as per specification approved drawings and schedules.
2
-
-
... More
Supplying, Fixing,testing and commissioning of fusible link type fire damper in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be spring return so as to close the damper in the event of smoke. The spring return action shall be inbuilt mechanism and not externally mounted. the damper shall also be closed in the event of fire signal complete as required and as per specifications.Fire Damper
7
-
-
... More
Supplying, Fixing,testing and commissioning of fusible link type fire damper in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring, the damper shall be spring return so as to close the damper in the event of smoke. The spring return action shall be inbuilt mechanism and not externally mounted. the damper shall also be closed in the event of fire signal complete as required and as per specifications.Actuator
10
-
-
... More
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish open cell Nitrile rubber (Class "0") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 75 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required above.19 MM thick
450
-
-
... More
Supply ,Installation,testing and commissioning of duct acoustic lining consist of various thickness resin bonded glass wool of density 48 kg/m3 and covered by 0.46 mm perforated aluminum sheets having 3 mm perforation at 6 mm centre’s. .Refer technical specification for detail description.25 mm thick
48
-
-
... More
Supplying,fixing acoustic lining on wall and ceiling of AHU rooms with 25 mm thick,density 32 kg/cu.m resin bonded glass fibre insulation friction fixed in 610 mm X 610 mm frame work made out of 0.6 mm thick GI Sheet U Shaped channel and covered with reinforced fibre glass tissue and finished with 0.80 mm perforated aluminium sheet etc.complete as per drawings and as per specification50 mm thick
85
-
-
... More
Supply,Installation,testing and commissioning of double Layer canvas connection fire retardant cloth for the end connection of CSU/AIR WASHER and Ventilation fan to reduce the vibration
8
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick. The buried pipe shall have sand cement plaster and tarfelt as per specifications in place of Aluminium sheet cladding.80 mm dia(32 mm insulation)
50
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick. The buried pipe shall have sand cement plaster and tarfelt as per specifications in place of Aluminium sheet cladding.65 mm dia(32 mm insulation)
20
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick. The buried pipe shall have sand cement plaster and tarfelt as per specifications in place of Aluminium sheet cladding.50 mm dia(32 mm insulation)
130
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick. The buried pipe shall have sand cement plaster and tarfelt as per specifications in place of Aluminium sheet cladding.40 mm dia(32 mm insulation)
80
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick. The buried pipe shall have sand cement plaster and tarfelt as per specifications in place of Aluminium sheet cladding.32 mm dia(32 mm insulation)
130
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick. The buried pipe shall have sand cement plaster and tarfelt as per specifications in place of Aluminium sheet cladding.25 mm dia(32 mm insulation)
130
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick. The buried pipe shall have sand cement plaster and tarfelt as per specifications in place of Aluminium sheet cladding.80 mm dia(32 mm insulation).(Burried Piping)
220
-
-
... More
Supplying, laying/ fixing, testing and commissioning of following nominal size of chilled water pipe inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with closed cell nitrile rubber with class "O" insulation and finally tapplying .63 mm aluminium sheet cladding complete with type 3, grade 1 roofing felt strip (as per IS: 1322 as amended upto date) at the joints repairing of damage to building etc as per specifications and as required.Note:- The pipes of sizes 150 mm and below shall be M.S 'C' class as per IS:1239 and pipes size above 150 mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.335 mm thick. The buried pipe shall have sand cement plaster and tarfelt as per specifications in place of Aluminium sheet cladding.50 mm dia(32 mm insulation).(Burried Piping)
180
-
-
... More
Supplying, fixing, testing & commissioning of Butterfly Valve for chilled water circulation, with C.I body SS disc nitrile sheet & O- ring & PN-16 pressure rating as specified. All valve shall be insulated with the same material as of pipe insulation material.
-
-
-
... More
80mm dia
6
-
-
... More
65mm dia
2
-
-
... More
50mm dia
2
-
-
... More
40mm dia
5
-
-
... More
32mm dia
8
-
-
... More
25mm dia
2
-
-
... More
Supplying, installing, testing & commissioning of 2 way motorised diverging valve with motor as required. The size of the valves are as follows: 80mm dia
1
-
-
... More
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.All valve shall be insulated with the same material as of pipe insulation material.
-
-
-
... More
80mm dia
2
-
-
... More
65mm dia
3
-
-
... More
50mm dia
1
-
-
... More
Supplying, fixing, testing & commissioning of Y Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled water circulation as specified
-
-
-
... More
80 mm dia
2
-
-
... More
40 mm dia
3
-
-
... More
32 mm dia
1
-
-
... More
Supplying , fixing, testing & commissioning Non Return Valve with dual plate of CI body SS plates vulcanized NBR seal flanged end & PN-16 pressure rating for chilled / hot water circulation including insulation as specified.All valve shall be insulated with the same material as of pipe insulation material.
-
-
-
... More
80 mm dia
2
-
-
... More
Supplying , fixing, testing & commissioning of expansion below of PN-16 pressure rating for chilled / hot water across pump and chiller for resisting the unit vibration to the main pipe Line.
-
-
-
... More
80 mm dia
4
-
-
... More
Supply, Installation , Testing & Commissioning of Two way Modulating type Pressure Independent Balancing Cum Flow Control Valves. Supply , Installation, testing and commissioning of Pressure independent type 2 way Balancing and modulating Control valves in a single Unit of Valve. PN16 Rating. It should be diaphragm type & pressure balancing should be done with Delta P controller only (not cartridge). Pressure Drop across the valve must not exceed 20 kpa up to DN 32 (for CS-AHU) and 30 Kpa in bigger Sizes (for AHUs). DN 15 to DN 32 Brass Body Ext. Threaded DN 40 & DN 50 Cast Iron Body2 , Ext. Threaded AND DN 65 to DN 100 Cast Iron body, Flanged Ends Connection . Duly mounted with Modulating actuator IP42/54 Accordingly type suitable for 24V AC. Actuator should be Gear type only (not thermal/wax) & should have the self-calibrating feature.Valve & Actuator combination should be able to give logarithmic control characteristics to achieve linear control. The Valve should be selected to enable lowest possible pressure drop to have benefits of lower recurring Pumping Energy.All Valve shall be capable to communicate with BMS System. As per specifications of following sizes with maximum Flow rate & Min. Pressure Drop :
-
-
-
... More
DN 32mm dia
4
-
-
... More
DN 40 mm dia
2
-
-
... More
Supplying, installing, testing and commissioning of Auto Air Vent at all high points in the piping system for venting. Valves shall be of double flat type with Brass body, rubber seating etc.
6
-
-
... More
Supply, Installation, Testing , & Commissioning of Brass Ball Valve of 25 mm diameter (Drain) complete with nipples etc. as required and as per specifications.
22
-
-
... More
Supplying, installing, testing and commissioning of pressure gauges, it shall be dial type (100mm) of range 75 mm. Vacuum to 10-kg/cm² pressure for compound gauges at pump suction and 0-10 kg/cm² pressure for normal gauges. Dial to be in white colour and numbers in black and / or red colour. Gauges selected must provide mid-scale readings under normal operating pressures. Gauges shall be liquid filled to dampen pulsation, with bright finished stainless steel ss-304 case, brass movement, bronze bourdon tube, and shall be furnished witha pulsation dampening orifice. Gauges shall have a SS syphon of 19 mm dia and 400mm length both side threaded with SS nut. A ball valve shall be provided at one end for protection of gauge.
19
-
-
... More
Supplying, installing, testing and commissioning of The Thermometer shall be dial type (100 mm) of range 0º C to 50º C/32º F to 120ºF.The body shall be of stainless steel grade SS 304. Thermometer shall be suitable for 12 mm connections with long stem, so that thermometer is removable without damaging the insulation. M.S. socket to be welded on pipes with copper thermo wells for installing thermometers.
19
-
-
... More
Supply, installation, testing and commissioning of factory fabricated Single Skinned cabinet type fans section made out of extruded aluminium section with 1.0 mm pre-plasticized / pre-coated Galvanised steel sheet with DIDW blower, blower section and blower single phase motor . The fan Motor shall be of high efficiency. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete fan section shall conform to standard specification. The fan outlet velocity shall be limited to 9.2 MPS maximum.
-
-
-
... More
2000 CFM, 20 MM SP
1
-
-
... More
1000 CFM, 20 MM SP
1
-
-
... More
Supply, installation, testing and commissioning of propeller type fan with Al./SS blades and complete with induction Motor suitable for operation with 230 V single phase 50 Hz with suitable frame etc. as per IS:2312-1967 with gravity dampers for exhaust complete as per specifications and drawings.The unit shall be compatible with BMS System and complete in all respect.The quoted price shall consist of mounting arrangemnt for the fan. The maximum sound level of unit shall be 60dB(A) @ 3 m from source.
-
-
-
... More
800 CFM
1
-
-
... More
600 CFM
1
-
-
... More
UVC lamp 254 NM on NANO metallic compound target Alumninum matrix cell duly enclosed by a poly casing tube, with the capability to produce plasma Hydroxyl oxidizers along with anti microbial coating having NANOX Technology. The unit shall have inbuilt multipin ion generator (+-10^6) pins along with ultrasonic radio frequency waves for pest repellancy. The UV-C lamp will be a low-pressure mercury type and of such intensity as to provide minimum performance as listed below. The UV-C lamp will produce only Germicidal UV (by definition this means 99.99% UV-C energy).The cell will have built in LED indication system stating the operation of the 4 technologies the UV lamp (254nm ), Oxidiser, ionizer and pest repellant. The power / control cabling between the Pentagon units and the power source / controls shall be included in the cost .The system shall be capable of reducing microbial bacteria, virus and spores , VoC’, odors and particulates matter. The Manufacturer or Supplier Must have the Virology test with the CCMB Lab. The UVGI system have there UV Lamp Tested with the CSIR and Must have Evaluation Report of the same. The equipment shall conform to GreenPro, CE and ROHS. Standards certifications shall be submitted along with the technical submital and Particulate air purification system with Electrical Trap technology & Neutral plate to achieve the IAQ parmaters by reducing harmful pollutants i.e. particulate matter. The unit shall be in a powder coated steel casing and self contained with the Series Two way coard. It shall be of three working principles. Unit shall be suitable for the air quantity similar to AHUs. It shall be suitable for operation on 220±6 % volts, 50 Hz,1 phase AC power supply. The efficiency of the system is 99% for PM 1 micron sized particles equivalent to MERV 14. Pressure drop should be more than 7mmWG. The Neutral stage of filter should be washable type and should have minimum life of 3-4 years without any consumables. The filtration and purification system shall have CE, RoHS, ISO certification along with FDA compliance. Technical submittals with supported certifications shall be submitted for approval prior to procurement. Quoted price shall be inclusive of all necessary arrangement as required for fixing of filter section within AHU and control wiring etc.
-
-
-
... More
For 1000 CFM AHU Unit
1
-
-
... More
For 1800 CFM AHU Unit
2
-
-
... More
For 2000 CFM AHU Unit
1
-
-
... More
For 2800 CFM AHU Unit
2
-
-
... More
Supply,installation,testing and commissioning of glycol storage tank, 1 no working & 1no. stand by pump for hot glycol & 0.63mm Aluminium cladding shall be provided the exposed hot water pipes to be installed outside the building and inside plant room. The unit shall be complete with all accessories as required for heating system such as pipes, insulation, electrical panel, cable, termination, cable tray. The unit shall be store with 50 % extra glycol capacity for stadby purpose & capacity of the unit shall be half of the boiler capacity.
1
-
-
... More
Design , fabrication, wiring, Supply, Installation, Testing and Commissioning of following Wall mounted / Floor mounted(including base stand), 415V,3PH, 50Hz extensible and fully compartmentalized panels complying to IS 8623/93. The indoor panels shall be IP 42 and outdoor panels shall be IP 54 type. The Panel shall have proper space with required clearance for cables, incoming / outgoing switchgear, CTs, PTs, Ammeter, Voltmeter, selector switches, Insulated and properly supported compartmentalized bus bars with heat shrinkable sleeves along with the other control circuit accessories within the panel and any other electrical component mentioned in the Panel SLD.The panel shall be fabricated out of CRCA not less than 2.0 mm thick for load bearing members and 1.6mm for the doors of LT panel. The Panel shall have seven tank pre treatment process comprising of degreasing, rinsing, de-rusting, rinsing, phosphatising, rinsing and passivation followed by powder coat painting having a paint thickness of 60 microns or as specified. The Panel shall be Dust/Vermin poof with earth studs as per the SLD and specifications. All Panels shall be BMS compatible.
The unit shall be complete with all cable accessories required as per specification.
1
-
-
... More
Supply, installation testing and commissioning of Direct online starters suitable for motors of air handling units/ Heat recovery wheel/Ventilation fans of below mentioned capacities. The starter shall comprise of all necessary power and control equipments including, Auto / manual selector switch, start / stop push button, LED indication, line contactor, Overload realys, Potential free NO/NC contact for control wiring, 415V actuated relay coil, necessary control wirings properly connected in fully usable state. Minimum utilization catagory for all contactors shall be AC3 and contactor shall be capable to withstand the steady state (full load) and starting inrush current. The starter shall have necessary protection device (MPCB +EOCR) whose settings and ratings shall be as per the type-2 co-ordination chart. The starter shall have inbuilt protection against overcurrent, short circuit and single phasing. All below mentioned starters shall be BMS compatible and additional contacts and wiring required for BMS integration shall be provided.
-
-
-
... More
0.5 kW
2
-
-
... More
0.75 kW
4
-
-
... More
1.0 kW
6
-
-
... More
Supplying & laying of following all cable, cable termination, cable trays and earthing conductor as per SLD and specification.
1
-
-
... More
FURNITURE
-
-
-
... More
Reception Table Dimension(L) 3300mm X (D) 750mmX (H)750mm (all over ht 1100mm) Supplying, and placing in position of reception Table as per Image/drawing . The table top are made up of 36mm thick pre-laminated particle board and understructure shall be made of 25mm thick prelaminated particle board with 2mm thk pvc edge banding . Modesty & side panel shall be 25mm thk prelam particle board with 2mm thk pvc edge banding . The Table top height will be 750mm from the floor level & side panels height will be 900mm and modesty height will be 1000mm . Also a provision of one additional top at the height of 150 mm above the modesty panel rest on SS stud . overall ht of the table 1100mm. upper table top are made up of 25mm thk prelam particle board with 2mm thk pvc edge banding. upper table top depth will be 300mm .The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of Prelam particle board Mobile pedestal of size 400mm(L)x 450mm(D)x600mm(HT) (2 drawer + 1filling). Pedestal top are made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated particle board with handles and locking arrangement. The front of the table is provisioned with designed wooden panel as per shown in image.All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
1
-
-
... More
Side Storage with reception table Dimension: 900mm(L) X 450mm(D) x 750mm(H)Supplying, and placing in position of medium height storage @ 750mm height as per photograph/drawing . The storage unit having Openable shutters with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided with 2 mm thick PVC lipping. The storage unit having openable shutters with D shape handles & locking arrangement. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specif
1
-
-
... More
Reception ChairSupplying and placing in position of 360 degrees Revolving Medium Back chair of size :- (W)660mm X (D)510mm X (H)1060mm as per image. The backrest is fitted with taut breathable mesh for optimal support with an adjustable lower back support. The seat cushion stays firm on the sleek chrome base with sturdy nylon castors. Upholstered in soft black fabric the seat cushions comfort. Powered by a pneumatic gas lift and tilt tension control the chair offers superb ergonomic support for your body. Mechanism:Tilt Tension Control, Adjustable Armrest..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
8
-
-
... More
Sofa for Reception & waiting room 3 seater Dimension (L)1650mm X (D)750mm X (H)710mm , 2 seater Dimension (L)1390mm X (D) 750mm X (H)870mmSupplying, and placing in position of sofa as per Image.A supple premium Leatherette upholstery adds class to the soft cushioned backrest and seating. Sitting proudly on sleek steel legs the sofa exudes a sense of comfort that is perfect for any space. Material & subtype:Premium Leatherette, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam beech solid wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharg
4
-
-
... More
Visitor Chair for OfficeSupplying and placing in position of 360 degrees Revolving Medium Back chair of size :- (W)660mm X (D)510mm X (H)1060mm as per image. The backrest is fitted with taut breathable mesh for optimal support with an adjustable lower back support. The seat cushion stays firm on the sleek chrome base with sturdy nylon castors. Upholstered in soft black fabric the seat cushions comfort. Powered by a pneumatic gas lift and tilt tension control the chair offers superb ergonomic support for your body. Mechanism:Tilt Tension Control, Adjustable Armrest..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
6
-
-
... More
Linear Workstation for Sports Departments Offices, Dimension : 900mm(L) X 600mm(D) X 1050mm(H).Supplying and placing in position of Linear Workstation as per photograph/drawing. The modular workstation shall be made out of 25mm thick pre -laminated particle board of approved shade. The working and non working edges shall be finished with machine pressed with 2mm PVC egdge banding. The table top shall be supported with MS powder coated C- shaped leg of size 50mm x 50mm thickness with connectors of size 40mm x 40mm. Provision of 18mm thick Soft board panel above the table top with MS powder coated holders. Provision of Junction box & wire raceway for wire passing. The workstation shall be provisioned with sharing Pedestal Unit of size:- L-400mm x D-450mm x H-600mm with a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of D shape handles & Locking arrangement. Provision of one PVC keyboard tray and CPU trolley for each seating. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
2
-
-
... More
Workstation Chair for Sports Departments Office, Supplying and placing in position of 360 degree Revolving medium back chair of Dimension (W)585mm X (D)660mm X (H)1060mm as per image . Ergonomically designed, it features a breathable mesh backrest and adjustable lumbar support to provide you all-day comfort. it offers Synchro Single Locking Mechanism along with a Tilt Tension Control. The adjustable armrest provide deluxe comfort while the strong chrome base . The 55mm castor wheels and a 360-degree swivel provide swift yet stable movement.High-quality fabric upholstery with high abrasion-resistance and superior tear strength & colourfastness,Premium high-density virgin foam for comfortable seating, High stability chair with no-tip over, clearing drop test of 102kgs,Adjustable Lumbar Support for superior back support,Pneumatic Height Lift with Class IV gas lift,Adjustable headrest with Synchro Single Locking and Tilt tension control for improved mobility. The Product should be from the manufacture of approved make of Godrej, Durian, HNI. complete as per specification mentioned above & images under the guidence of project architect/ engineer incharge.
2
-
-
... More
MP Hall Chair, Supplying, and placing in position of MP Hall chair Model S 204 Floor Mounted - 490 mm CTC
50
-
-
... More
FIRE FIGHTING WORKS
-
-
-
... More
PUMPS: 11.NOC from fire authority shall be in the scope of Contractor . Only fee paid to the fire authority shall be reimbursed against the submission of the receipt and nothing shall be paid extra. 2. All the Fire Fighting works shall be done in compliance of Fire Fighting authority requirement. Pump shall be capable of furnishing not less than 150% of rated capacity at a head not less than 65 % of rated head. The shut off head shall not exceed 120% of rated head.
-
-
-
... More
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm at 70 m Head. Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.
2
-
-
... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm at 70 m Head. Note: *The head of the pump is selected in a manner so as to give a minimum 3.5kgf/cm2 pressure at the highest/farthest point.
1
-
-
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump).Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads180 lpm at 70 m Head (For Hydrant ).
2
-
-
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520.Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.Suitable cement concrete foundation duly plastered and with anti vibration pads.450 lpm at 35 m Head (1W+1S)
2
-
-
... More
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
Incomings
630A, 50kA 4 Pole MCCB, Ics=100% Icu Rating
Digital Voltmeter 0-500V with selector switch
Ammeter (0-630 A) with selector swtich & CTs etc.
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 800A
Outgoings
( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
Main Fire Pump
200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 2 Set
Jockey Pump
100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. 2 Set
Diesel Engine Control
Control for diesel engine comprising -
Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode
Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication
Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter
All standard relays and accessories for automatic operation of diesel engine
System Controller
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.
1
-
-
... More
Supplying,Installation,testing & commissioning of dust & vermin proof double door with canopy type taperd roof wall / floor mounted compartmentlised feeder piller type cubical control Panel for fire fighting terrace pump of front area not less than 1.0 Sqmtr. and depth not less than 300 mm, made out of 2mm thick CRCA sheet with 100 Amp. 4 strip aluminium bus bars with front openable door & locking arrangement, interconnection, control wiring, intrigation with pressure switch i/c suppying & fixing following switchgears & control gears/starters etc. as required.
Incomming
100 Amps. 16ka breaking capacity 4 pole MCCB-1 Nos.
Voltmeter (0-500 Volt) with selector switch.-1 Nos.
Ammeter (0-100 Amps.) with selector switch -1 Nos.
Set of 3 phase indication lamp-1 Set
100 Amps. 4 strip insulated bus bars-1 Nos.
Outgoing 63 Amps. 10ka breaking capacity 3 pole MCCB--2 Nos.
Ammeter (0-60 Amps.) with selector switch-2 Nos.
Suitable HP fully automatic Star/Delta Starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation.- 2 Set
Selector switch for local/remote, auto/manual/off operation ON/OFF indication etc.- 2 Set
1
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. It should be complete as per specifications & directions of Engineer-in-charge.
-
-
-
... More
4 x 25 sqmm ( 28 mm )
3
-
-
... More
3.5 x 50 sqmm ( 35 mm )
4
-
-
... More
3 X 10 sq. mm (22mm)
4
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.150 mm width x 50mm depth x 1.6 mm thickness.
20
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
20
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
20
-
-
... More
Providing, fixing, tetsing & commissioning of annunciator panel for flow control switches, providing audio /visual indication of actuation of automatic sprinkler system for each zone complete as per specifications. The panel should have interface for connection to complete controlled building management system. The panel should have:-
a) Fault indication for each zone
b) Indication of zone fire
c) Fire/Fault hooter
d) Alarm Panel for fire/fault
e) Battery for emergency
f) Battery Charger
g) mains supply and shall cater for minimum 3 zones working and 1 zones spare
1
-
-
... More
Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor armoured UG cable of 1.1 KV grade Conforming to IS 7098/1988 with upto date ammendment of following size in the existing RCC/HUME/ METAL /GI /CI /Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred.
-
-
-
... More
4 core, 25 sq.mm. Aluminium Armoured
20
-
-
... More
3.5 core, 50 sq.mm. Aluminium Armoured
35
-
-
... More
3 core, 10 sq.mm. Aluminium Armoured
10
-
-
... More
Supply and fixing in position 1 m wide Insulation mat made of elastomeric polymers Material (Class -A) of 415V grade as per IS 15642-2006 . Thickness of insulation mat shall be not less than 2 mm to withstand 1.1 KV dielectric strength AS PER IS 15652 : 2006. It should be complete as per specifications & directions of
5
-
-
... More
Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523 :
-
-
-
... More
Up to 600 mm dia
15
-
-
... More
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber
gasket :
-
-
-
... More
100 mm dia pipes
5
-
-
... More
150 mm dia pipes
28
-
-
... More
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :
-
-
-
... More
100 mm dia Ductile Iron Double Flanged
10
-
-
... More
150 mm dia Ductile Iron Double Flanged
56
-
-
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground )
-
-
-
... More
150 mm. Dia
50
-
-
... More
100 mm. Dia
20
-
-
... More
80 mm. Dia
30
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. (Plant Room piping/Vertical Riser/Downcomer/Floor)
-
-
-
... More
25 mm dia
180
-
-
... More
32 mm dia
45
-
-
... More
40 mm dia
45
-
-
... More
50 mm dia
15
-
-
... More
65 mm dia
75
-
-
... More
80 mm dia
35
-
-
... More
100 mm dia
25
-
-
... More
150 mm dia
85
-
-
... More
200 mm dia (wall thickness 6.3 mm)
25
-
-
... More
250 mm dia (wall thickness 6.3 mm)
25
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel
25
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
50mm dia
10
-
-
... More
65mm dia
2
-
-
... More
80 mm dia
2
-
-
... More
100 mm dia
5
-
-
... More
150 mm dia
8
-
-
... More
200 mm dia
1
-
-
... More
250 mm dia
1
-
-
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
10
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
-
-
-
... More
65 mm dia
2
-
-
... More
80 mm dia
2
-
-
... More
100 mm dia
2
-
-
... More
150 mm dia
2
-
-
... More
250 mm dia
2
-
-
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
-
... More
200mm dia.
1
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304)
50
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
-
... More
40 m
25
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
-
-
-
... More
Stainless Steel (Grade 304)
25
-
-
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
-
-
-
... More
2 way-100 mm dia M.S. Pipe. (FOR UG TANK)
2
-
-
... More
4 way - 150 mm dia M.S. Pipe. (FOR UG TANK)
1
-
-
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
3
-
-
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
-
-
-
... More
Pendent Sprinkler
72
-
-
... More
Upright Sprinkler
72
-
-
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
14
-
-
... More
Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.:150mm dia
10
-
-
... More
Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :
-
-
-
... More
80mm dia
2
-
-
... More
100mm dia
2
-
-
... More
150mm dia
2
-
-
... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.
-
-
-
... More
700 mm
35
-
-
... More
1000 mm
45
-
-
... More
Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
72
-
-
... More
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
35
-
-
... More
Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete.
25
-
-
... More
Providing & Fixing of MS door made up of 16 gauge MS Sheet capable of accommodating fire hose reel, landing valve, hose pipes, fittings, 1 No. CO2 & 1 No. Dry podwer type portable fire extinguishers & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with one coat of primer & two coat of finished stove enamelled post office red colour paint & "FIRE HOSE" written on front.
(Approx. size of door: 2100 mm HEIGHT, WIDTH OF DOOR AS PER SHAFT SIZE )
25
-
-
... More
Providing and fixing hose cabinet of size 750mmX600X250mm made of 16 gause thick MS sheet with 4 mm thick float glass doors in front painted "FIRE" in red paint i/c recessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15 mtr. long hose pipe. 1 no. brach pipe mounted on wall or raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant. as directed by Engineer-in-Charge.
2
-
-
... More
Pressure Vessel
Supplying, installing, testing and commissioning of pressure vessel for pressurization of fire system complete with valves at outlet / drain to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, outside with one coat of primer & two coats of synthetic enamel paint of approved shade complete as required to operate commonly main fire pump, sprinkler pump & jockey pump at drop of pressure, automatically at required pressure setting. Complete as per manufacturer's specifications & as directed by Engineer- in-charge.
working pressure:- 11 kg/sqcm
test pressure: 20 kg/sqcm (450 mm dia & 2000 mm height)
1
-
-
... More
Providing, Fixing, testing and commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 11 Kg/cm2 and test pressure 16 Kg/cm2 to provide relief from stresses at pipe flanges.
-
-
-
... More
150 mm dia
8
-
-
... More
80 mm dia
6
-
-
... More
Supply, fixing, testing and commissioning of screwed type brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 & spindle AISI 410) with setting & gland of superior quality having minimum working pressure of 16 kg/sqcm. : 25 mm Dia
2
-
-
... More
Providing and fixing 25 mm dia inspection & testing assembly with gun metal ball valve, gun metal sight glass ,Reducer ,union, G.I PIPE. connection to drain pipe/riser.
1
-
-
... More
Providing & fixing cast iron 100 mm dia. Foot valve with nuts, bolts, 1.5 mm thick CAF gasket complete with all accessories (To be provided into UG Fire Water Tanks).
1
-
-
... More
Supply and fixing of 4 Nos G.I round bottom FIRE BUCKET of 9 LTR. Capacity field with sand including proper supporting /mounting arrangement MS Angle Iron Frame painted by fire red colour over 2 coats of red oxide paint and written with white paint FIRE complete in all respects as per direction of Engineer Incharge
6
-
-
... More
Providing, fixing water flow meter on test line complete with all accessories for flow indication , monitoring & testing of fire pumps with bypass arrangment including piping & bypass valves.
-
-
-
... More
150 mm dia
1
-
-
... More
Supplying and installing of SMC panel tank confirming to IS:14399 (part 1 & 2):1996 in made up from hot press sheet moulding compound (SMC) panels 1mX1m, 1mX 1.5m, 1mX2m size panels should have extra strength and 90 deg flanges pre drilled for bolting size M12. The panels with hot dip galvanised steel nut-bolt and washer, special sealant having excellent un resistance.The tank have complete accessories with top covered construction having manhole with lockable lid 700mm dia. convex shape drain panel, 100mm dia. air vent with mosquote proof mesh, FRP internal ladder with complete fixing arrangement and GI ladder with fixing arrangement. The external reinforcement of C channels at every 1m with external top tie rods with double coat of painted.
-
-
-
... More
cap.5000 liter (OHT)
2
-
-
... More
cap.10000 liter (UGT)
2
-
-
... More
Providing and fixing of external thermal insulation and composite system with First layer of self-extinguishing type Expanded Polystyrene (EPS) insulation boards of 120 mm thick ( max 1mX0.5m section), confirming to IS 4671:1984, having thermal conductivity of 0.034 W/mK, (measured as per IS 3346-1980), density of 20-24 kg/m³ measured as per IS 5688-1982, Fire retardant property selfextinguishing type as per EN 13501-1, bonded with special polymermodified cementitious adhesive confirming to EOTA ETAG 004 (European Technical Approval) formulated to bond polystyrene insulation boards to typical mineral substrate (according to ETAG 004) and Polypropylene mechanical fasteners with plastic pin confirming to EOTA ETAG 014 (European Technical Approval) having dia 10mm & L=200mm on finished level wall and the junction between two adjacent EPS boards to be sealed with low expansion moisture cure Polyurethane Foam. Second layer consists of Fiberglass mesh covered with alkali-resistant coating, mass per unit area ?145 gm/m², mesh size: 3.9x4.0 mm ±10% embedded in special polymer modified cementitious Base Coat with hydrophobes and the corners will be protected with Corner-beads with alkali-resistant mesh wings at least 10 cm wide, mesh mass per unit area min 145 gm/m². Thesurface will be levelled, finished, made smooth complete in all respect as per manufactures specification and as per directions of Engineerin-Charge.
45
-
-
... More
Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below:
-
-
-
... More
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
Providing and fixing of 4.5 Kg. carbon-di-oxide type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase ingernal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming ro IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with internal charge.
10
-
-
... More
Providing and fixing 6.0 Kg. ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with inernal charge.
8
-
-
... More
Providing and fixing 9.0 Kg. ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with inernal charge.
1
-
-
... More
Providing, fixing, testing and commissioning of 50 Litres (trolley mounted) Mechanical Foam type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and confoming to IS:13386 .
1
-
-
... More
Providing, fixing, testing and commissioning of CO2 type Fire Extinguisher of capacity 22.5 kg filled with Co2 Gas as per IS 15222 with controll discharge mechanism fitted with Hose, Horn & TROLLEY confirms to IS 2878 bearing ISI mark. Co2 Cylinder as per IS 7285.
1
-
-
... More
Providing and fixing 2 kg capacity clean agent-HFC 236FA Stored Pressure type fire extinguisher ISI marked under IS:15683 complete with imported Novec 1230 manufactured by 3M, with Zero Ozone Depeltion Potential and Very Low Global Warming Potential of 1 with 20 Years Blue Sky Warantee against any regulatory Bans and Restrictions.
2
-
-
... More
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc.
210
-
-
... More
Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based Novec 1230 Clean Agent System for Electrical Panels (Linear Pnuematic Heat Detection Tube Panel Protection System), consisting of the Mentioned components:
-
-
-
... More
2kg capacity Novec 1230 Clean Agent , DLP Assembly with automatic valve, push in connector for tube, Novec 1230 Clean Agent , mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.
Make :- Tracefire/Firetrex/Safefire
2
-
-
... More
Linear pneumatic heat Detection Tube with all necessary fittings & supports.
Make :- Tracefire/Firetrex/Safefire
200
-
-
... More
Master Control Unit with Audio Visual Alarm with wiring to make complete system operational. The Control Panel should have provision for integration with Fire Alarm/SCADA/BMS System.
Make :- Tracefire/Firetrex/Safefire
1
-
-
... More
1 X 180 Itr completele CCOE approved high pressure seamless BIS 7285 approved Cylinders having 180 ltr capacity, UL/FM approved based Novec 1230 manufactured by 3M based clean agent 70bar pressurized system with PESO approved valve assembly . The system also to be fitted with low pressure supervisory switch for monitoring cylinder with safety burst disc safety cap, elbow and other accessories, mounting bracket, container straps, NRV , electrically operated control head which shall allow for electrical signal actuation of gas , manually operated actuator to actuate the gas flooding process with the help of a lever, flexible rubber hose with wire bralded enforcment to route the gas from the storage cyinder to the discharge piping, to be connected to the discharge outlet of gas cylinder valve & to be terminated at the system piping or discharge manifold, discharge pipoing & nozzle complete as required. Each cylinder must be fitted with digital pressure gauge to monitor pressure and temperature of cylinder at any given point to measure and view the data remotely through an online dash board or mobile application using gateways, iot (internet of things), or sim technology. The system should be capable of giving earlier warning for low pressure in a container and micro leak detection analysis and notification. The electric actuator shall be available with indicator so that on removal of electric actuator from the agent storage container discharge valve there shall be audio & visual notification. Make:- Tyco/Firetrex/Janus/Gastec-Vista
1
-
-
... More
PLUMBING WORKS
-
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade
1.88
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
75 mm diameter
1
-
-
... More
110 mm diameter
110
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single Push Fit Coupler
-
-
-
... More
110 mm dia
37
-
-
... More
110x110x110 mm
5
-
-
... More
Plain bend 87.5 deg
-
-
-
... More
110 mm dia
3
-
-
... More
Shoe (Plain)
-
-
-
... More
110 mm dia
6
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
110 mm dia
55
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
4
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid
4
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls
and floors wherever required : Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern
2
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
6
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
6
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
4
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
12
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm
6
-
-
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
2
-
-
... More
Providing & fixing toilet paper holder : C.P. brass
4
-
-
... More
Providing and fixing soil waste and vent pipes Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 100 mm dia.
80
-
-
... More
Providing and fixing M.S. holder-bat clamps of approved design to sand cast iron/ centrifugally cast iron(spun) pipes embedded in and including cement concrete blocks 10x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls, etc.
-
-
-
... More
For 100mm dia pipe
8
-
-
... More
Providing and fixing bend of required degree with access door insertion rubber washer 3mm thick, bolts and nuts complete. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 : 100 mm dia
12
-
-
... More
Providing and fixing double equal plain junction of required degree.Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905.100 x 100 x 100 x 100mm
16
-
-
... More
Providing and fixing single equal plain junction of required degree.Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905.100 x 100 x 100 mm
16
-
-
... More
Providing and fixing terminal guard Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 100 mm
15
-
-
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe SS 304 grade coupling with EPDM rubber gasket 100 mm
160
-
-
... More
Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipe of diameter: 100mm
3
-
-
... More
Providing and fixing trap of self cleansing design with sand cast iron screwed down or hinged grating with or without vent, arm complete, including cost of cutting and making good the walls and floors.Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 100mm inlet and 100mm outlet
14
-
-
... More
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe.
-
-
-
... More
Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe)
12
-
-
... More
Total bracket length 810 mm of approved shape and design (for two 100 mm dia pipes)
10
-
-
... More
Total bracket length 1040 mm of approved shape and design (for three 100 mm dia pipes)
10
-
-
... More
Providing & fixing Nickel Chromium Plated liquid soap dispenser with metallic bottle of approved brand & make 112 mm distance from wall of standard shape with bracket (Nickel chromium plating should pass Salt Spray Test for 200 hours) of the same materials with snap fittings of approved quality and colour, complete as per direction of Engineer in Charge.
3
-
-
... More
Providing, Fixing of CP brass Towel Ring with CP brass wall brackets and providing & fixing CP brass screws complete as required.
3
-
-
... More
Providing, Fixing of CP brass Towel Rail 600mm long without hanger with 3 hooks and CP brass screws complete as required.
2
-
-
... More
Providing & fixing soap dish holder of approved design.
2
-
-
... More
Providing,Fixing wall mounted of approved make Double Coat hook on door complete.
4
-
-
... More
Providing and fixing CP brass 2 Way Bib cock with wall flange with flow restrictor with flow rate 2.5 litre per minute at 3 bar.
4
-
-
... More
Providibng and fixing straight type approved make single body push fit type WC pan connector with factory supplied spring loaded seal guard of approved make with integral single mould sealing fins made of flexible EVA body, including bush/adaptor for use with C.I. Pipe as supplied with the pan connector. .
4
-
-
... More
Providing & fixing 100mm x 50mm G.I. waste with reducing elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to GI / CI waste pipe.
10
-
-
... More
Providing and fixing cast brass Floor cleanout plug with suitable insert keys for opening in brass cap, male threaded joint/reducer with G.I. socket caulked to Pipe/fittings of CI pipe including cost of lead joints etc. complete in all respect. 100 mm dia
6
-
-
... More
Providing and fixing GI inlet fitting with maximum 3 inlets 32,40 or 50 mm size fabricated from 100 dia GI pipes and sockets,fixed to C.I. trap with Drip Seal joint and set in cement concrete as per standard drawing complete as directed by Engineer-incharge.
10
-
-
... More
Providing and fixing SS Grating of 125 mm dia of approved quality and colour complete as per direction of engineer in charge.
-
-
-
... More
Circular Type 125 mm nominal dia with 25 mm waste hole
10
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :100 mm diameter
6
-
-
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia
6
-
-
... More
Providing & fixing of thermal insulation with aluminium foil faced nitral rubber Class 'O' insulation sheet of following thickness on existing surface of pipe/duct with dendrite/adhesive etc.The joints shall be sealed with 50 mm wide and self adhesive PVC/Aluminium tape complete as required. 19mm
500
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on Wall
-
-
-
... More
15 mm nominal dia Pipes
80
-
-
... More
20 mm nominal dia Pipes
25
-
-
... More
25 mm nominal dia Pipes
22
-
-
... More
32 mm nominal dia Pipes
20
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
15 mm nominal dia Pipes
100
-
-
... More
20 mm nominal dia Pipes
10
-
-
... More
25 mm nominal dia Pipes
10
-
-
... More
32 mm nominal dia Pipes
10
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge..External Work
-
-
-
... More
15 mm nominal dia Pipes
10
-
-
... More
20 mm nominal dia Pipes
10
-
-
... More
25 mm nominal dia Pipes
10
-
-
... More
32 mm nominal dia Pipes
10
-
-
... More
40 mm nominal dia Pipes
10
-
-
... More
50 mm nominal dia Pipes
10
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
i/c cutting and making good the walls etc.:
-
-
-
... More
32 mm dia nominal bore
10
-
-
... More
40 mm dia nominal bore
5
-
-
... More
50 mm dia nominal bore
10
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
20mm nominal bore
1
-
-
... More
25mm nominal bore
1
-
-
... More
32mm nominal bore
2
-
-
... More
40mm nominal bore
1
-
-
... More
50mm nominal bore
2
-
-
... More
65mm nominal bore
2
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
20 mm nominal bore
1
-
-
... More
25mm nominal bore
1
-
-
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end): Horizontal
-
-
-
... More
25 mm nominal bore
2
-
-
... More
32 mm nominal bore
5
-
-
... More
40 mm nominal bore
3
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore
30
-
-
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5
1
-
-
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5
1
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S (non modular) bricks of class designation 7.5
1
-
-
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :
-
-
-
... More
32mm diameter pipe
10
-
-
... More
40mm diameter pipe
5
-
-
... More
50mm diameter pipe
10
-
-
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work
-
-
-
... More
25mm diameter pipe
2
-
-
... More
32mm diameter pipe
12
-
-
... More
40mm diameter pipe
6
-
-
... More
50 mm diameter pipe
12
-
-
... More
65 mm diameter pipe
10
-
-
... More
80 mm diameter pipe
10
-
-
... More
100 mm diameter pipe
15
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
... More
15 mm nominal bore
20
-
-
... More
20 mm nominal bore
15
-
-
... More
25 mm nominal bore
7
-
-
... More
32 mm nominal bore
7
-
-
... More
40 mm nominal bore
2
-
-
... More
50 mm nominal bore
2
-
-
... More
Providing and placing on terrace (at all floor levels) SMC water storage tank, of 7.5 kl with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Providing and placing on terrace (at all floor levels) SMC water storage tank, of 7.5 kl with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
-
-
-
... More
cap.12000 liter (UGT)
2
-
-
... More
cap.12000 liter (OHT)
2
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15mm nominal bore (Basic rate of Bib Cock= Rs. 300/- each. Excluding GST)
14
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore (Basic rate of Long Bib Cock= Rs. 500/- each. Excluding GST)
2
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixture and geyser points of approved quality confirming to IS: 8931.
6
-
-
... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :50 mm dia
2
-
-
... More
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) :100 mm dia nominal bore
1
-
-
... More
Providing & fixing CI `Y' Strainer (screwed/ flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required.65mm nominal bore
2
-
-
... More
Providing and fixing M.S fabricated hot dipped galvanized coating puddle flange comprising of 600 mm dia long M.S class 'B' pipe (screwed end up to 50 mm & flange for more than 50 mm dia) with 6 mm thick M.S plates of required size including cutting holes in centre of plate, inserting pipe & making welded (Arc) joint complete. Same shall be installed with TEC welded joint in position with reinforcement bars of RCC tank wall/slab including making cutout in shuttering during concrete casting of tank of following diameter. (Location: Underground / Overhead Tanks.)
-
-
-
... More
25mm dia pipe, 600mm long with size of 250x250x6 mm MS plate
2
-
-
... More
32mm dia pipe, 600mm long with size of 250x250x6 mm MS plate
2
-
-
... More
40mm dia pipe, 600mm long with size of 300x300x6 mm MS plate
6
-
-
... More
50mm dia pipe, 600mm long with size of 350x350x6 mm MS plate
4
-
-
... More
65mm dia pipe, 600mm long with size of 350x350x6 mm MS plate
2
-
-
... More
80mm dia pipe, 600mm long with size of 400x400x6 mm MS plate
2
-
-
... More
Providing & fixing water storage cooler of approved make and brand with SS body Complete in respects-230V Single Phase. minimum flow rate of 40 ltrs. Per hour and storage capacity 80 ltrs.
1
-
-
... More
Supplying and fixing in position of approved quality Solenoid Valve with by-pass arrangement, isolation cock etc. complete with all required accessories such as level sensor, level indicator, level controller and required cabling for the same.
-
-
-
... More
32mm dia
1
-
-
... More
40 mm dia
1
-
-
... More
Providing and fixing water meter with direct reading dial in "KL" with all internal parts in gunmetal , strainer, flanged distance piece for easy removal in future, 100 mm dia Bourden type pressure guage and isolation cock including necessary test certificate for the meter. (For water supply metering from source).40 mm dia
-
-
-
... More
32 mm dia
1
-
-
... More
40 mm dia
2
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round HDPE pipes/ RCC pies/S.W. pipes including bed concrete as per standard design:
-
-
-
... More
150 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
120
-
-
... More
200 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
50
-
-
... More
250 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
300
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of HDPE pipes/ RCC pies/S.W. pipes including bed concrete as per standard design :
-
-
-
... More
150 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
10
-
-
... More
200 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
10
-
-
... More
250 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
10
-
-
... More
300 mm diameter HDPE pipe/ RCC pipe / S. W. pipe
10
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 180 x 150mm size P-type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
150mm dia RCC pipe
110
-
-
... More
250mm dia RCC pipe
45
-
-
... More
300mm dia RCC pipe
300
-
-
... More
Providing and fixing of external thermal insulation and composite system with First layer of self-extinguishing type Expanded Polystyrene (EPS) insulation boards of 120 mm thick ( max 1mX0.5m section), confirming to IS 4671:1984, having thermal conductivity of 0.034 W/mK, (measured as per IS 3346-1980), density of 20-24 kg/m³ measured as per IS 5688-1982, Fire retardant property selfextinguishing type as per EN 13501-1, bonded with special polymermodified cementitious adhesive confirming to EOTA ETAG 004 (European Technical Approval) formulated to bond polystyrene insulation boards to typical mineral substrate (according to ETAG 004) and Polypropylene mechanical fasteners with plastic pin confirming to EOTA ETAG 014 (European Technical Approval) having dia 10mm & L=200mm on finished level wall and the junction between two adjacent EPS boards to be sealed with low expansion moisture cure Polyurethane Foam. Second layer consists of Fiberglass mesh covered with alkali-resistant coating, mass per unit area ?145 gm/m², mesh size: 3.9x4.0 mm ±10% embedded in special polymer modified cementitious Base Coat with hydrophobes and the corners will be protected with Corner-beads with alkali-resistant mesh wings at least 10 cm wide, mesh mass per unit area min 145 gm/m². Thesurface will be levelled, finished, made smooth complete in all respect as per manufactures specification and as per directions of Engineerin-Charge.
200
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class designation 7.5With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
-
... More
Extra for depth for manholes:Size 90 x 80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m to 2.29 m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
60
-
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality HD - 20Circular shape 560 mm internal diameter
5
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Providing and fixing F.R.P. Grating drain cover M.S. Angle ( 35 x35 x 5 mm). ( Load Bearing cap. 5 T, suitable for car parking, basement, Pump room, Parking Area ).377mm wide and 30mm thick
2
-
-
... More
Excavating trenches of required width for pipe, cables etc including excavation for sockets ,& dressing of sides ,ramming of bottoms ,depth upto 1.5m including getting out the excavated soil,& then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m. All kinds of soil Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia
100
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets,depth upto 1.5 m, including getting out the excavated matterials, returning the soil as requred in layers not exceeding 20 cm in depth including consolidating each deposited layers by by ramming, watering,etc. and stacking serviceable material for measurements and disposal of unserviceable matterial for measurement and disposal of unserviceable matterial as directed within a lead of 50m:
-
-
-
... More
Ordinary rock: Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
300
-
-
... More
Hard rock (requiring blasting): Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
50
-
-
... More
Earth Work in excavation by mechanical means (Hydraulic / excavator ) manual means over area (exceeding 30 cm in depth ,1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed as engineer incharge.
-
-
-
... More
Ordinary Rock
50
-
-
... More
Hard Rock(requiring blasting)
300
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :"1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
15
-
-
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level.All types of soil 400 mm dia.
80
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.200 mm nominal size dia.
60
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia.
20
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
20
-
-
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
24
-
-
... More
Providing and fixing suitable size threaded mild steel cap/shoe or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia
1
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp.
1
-
-
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia
1
-
-
... More
Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified. 80 mm dia.
1
-
-
... More
Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end & PN 16 rating as specified. 80 mm dia.
1
-
-
... More
Providing and fixing 80mm dia GI pipes to IS:1239 heavy class with fittings.
80
-
-
... More
Supply, Lowering, installation & testing of KSB make submersible pumping set with 10 HP motor 18 stage pump suitable for maximum capacity of 20 m3 hr. at 100 mtr. Head respectively. With Three Phase.
1
-
-
... More
Providing & fixing cable 6 sq.mm. From submersible pump to panel board.
100
-
-
... More
Providing & fixing Panel Board for submersible pump fitted with DOL starter ammeter, voltmeter single phase preventer standard/indo/cop make MCB of off switch push bottom duly wired and made out of 16/18 SWG sheet.
1
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
225
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
150
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in.All kinds of soil.
80
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth levelConcrete of M30 grade with minimum cement content of 350 kg /cum
10
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves,chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing & reinforcement with1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size)
10
-
-
... More
Centring and shuttering including stutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and acees platform
10
-
-
... More
Steel reinforcement for R.C.C. work including supplying, straightening, cutting, bending, placing in position and binding with GI binding wires (18 gauge) all complete above plinth level.Thermo-Mechanically Treated bars.
30
-
-
... More
Providing and doing Brick masonary work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
5
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia steel bar conforming to IS :1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and heaving manufactures permanent identification mark to be visible even after fixing " including fixing in manholes with 30x20x15 cm cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size )complete as per design.
15
-
-
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.HD-20 circular shape 560 mm internal diameter.
2
-
-
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level.All types of soil400 mm dia.
80
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.200 mm nominal size dia.
60
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia.
15
-
-
... More
Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
15
-
-
... More
Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
20
-
-
... More
Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer –in-charge.
15
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
15
-
-
... More
Providing and fixing suitable size threaded mild steel cap/shoe or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia
1
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp.
1
-
-
... More
Supply, installation, testing & commissioning of vertical inline multistage pumping set (Imported) with Stainless steel-304 body, Stainless steel-304 impeller, Stainless steel-304 casing, shaft of Stainless steel-316 and C.I. base & head with mechanical seal, connected to a TEFC induction motor suitable for 415+/- 10% volts, 3 phase 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads under foundations, 80x40 mm I section base plate bolted to cement concrete foundations complete.Vendor to submit performance curves and technical catalogue of the proposed model for review and information.
-
-
-
... More
Filter feed pump at Pump Room Set of Two Pumps ( 1 Working+ 1 Standby)Capacity 1.0 LPS Head 70 M.HP 2.0 HP Approx.
1
-
-
... More
Hyd. System for Domestic Water Supply Pump Set of Two Pumps ( 1 Working+ 1 Standby)Capacity 1.0 LPS Head 70 M.HP 2.0 HP Approx.
1
-
-
... More
Supply, installing, testing and commissioning of submersible open impeller non-clog pumps with C.I.body and to TEFC submersible motor for 415 + 10% volts, 3 phase, 50 cycles A.C. power supply with mechanical seal, pump connector unit with rubber diaphragm and bend, vertical discharge pipe, guide pipe and chain in built level controller, sequence running controller, arrangement for both pumps together inacase of emenegency, audible hooter for failure or flooding, dry running Protection complete in all respects., painting, testing and commissioning complete with approved quality and make as required as per instruction of site incharge. (Pumps shall be installed in a set of two pumps One working and One standby)Pump Room & basement Drainage Pumps.(Pumps to be suitable to handle solids upto 12 mm size) Capacity - 4.0 LPS (Each) Head - 20 M H.P. - 2.0 HP Approx.
2
-
-
... More
Design, manufacture, supplying, fixing in position, testing and commissioning of the following front operated cubicle type, front access 2mm thick mild steel sheet, free standing, dust and vermin proof, switchboard with IP42 protection with hinged and lockable doors complete with interconnections, tinned copper crimping lugs, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz system and suitable for a fault level of 25 MVA symmetrical at 415 volts.All switchboards shall have provision for entry of cables from the top or bottom as required.All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position.
-
-
-
... More
All switchboards shall have provision for entry of cables from the top or bottom as required.
All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used. Padlocking facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position. Electric Panel For Water Supply Pumps at Water Supply Pump Room
INCOMING
1 No. 63 amps TPN MCCB with the following accessories:
1 No. square flush mounting 0-500 volts scaled voltmeter with three way and OFF switch.
Three phase indicating lights.
Electrolytic high conductivity three phase and neutral tinned copper bus bar rated at 100 amps having a current density of 1 amp per Sqmm suitable to with stand symmetrical fault level of 25 MVA at 415 volts. The neutral bus bar is to be of 100% capacity.
OUTGOING UNITS
Two 25 Amp. TP+N M.C.C.B. with rotary handle of breaking capacity 25KA
Two 40 Amp. TP+N M.C.C.B. with rotary handle of breaking capacity 25KA
3 Nos. fully automatic DOL starters with push buttons and ON/OFF indicating lights and overload relays for 1.5 to 7.5 HP pump .
3 Nos. rotary selector switch for selecting mode of operation i.e. auto/manual/off.
4 Nos.cyclic relay for automatic duty changeover of pumps.
3 No. single phase preventors.
3 Nos. square flush mounting 0-30 amps scaled ammeters with three way and OFF selector switch.
Space for 3 Nos. Level Controllers.
Switchgear shall be suitable for the HPS of various motors.
2 Nos. 40 Amp. TP+N MCCB Spare.
-
-
-
... More
The motor control panel shall be prewired with colour coded wires with identification labels complete in all respects as required.
1
-
-
... More
Supplying, installing, testing and commissioning controllers with low voltage relays, stainless steel probes and PVC shroud wiring from tank top to probes of required.Level Controller For Water Supply Pump:To start pump when water level is low in Domestic Water U.G. tank and shut off pump when Domestic Water U.G. tank is full. Also to stop when water level is low in raw water underground tank.
1
-
-
... More
Level Controller For Sump Pumps:To start pump when water level is high in sump and shut off pump when sump is empty. Both pumps are start when sump is over flowing.
1
-
-
... More
Providing and fixing GI pipes complete (IS:1239 Heavy Class) with GI fittings and clamps including MS pipe supports, enamel paint as per specifications cutting and making good the walls etc. complete.
-
-
-
... More
50 mm dia
10
-
-
... More
65 mm dia
10
-
-
... More
80 mm dia
5
-
-
... More
Butterfly valve (manual) with C.I body SS disc nitrile sheet & O ring & PN 16 Pressure rating as specified .
-
-
-
... More
50 mm dia
2
-
-
... More
65 mm dia
2
-
-
... More
80 mm dia.
2
-
-
... More
Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end & PN 16 rating as specified.
-
-
-
... More
50 mm dia
2
-
-
... More
65mm dia.
2
-
-
... More
80 mm dia.
2
-
-
... More
Providing and fixing resilient rubber neoprene lined style arch vibration eliminators suitable for raw water upto 45 deg.C. Temperature working pressure upto 16 Kg/Sqcm.
-
-
-
... More
50 mm dia
2
-
-
... More
65 mm dia
2
-
-
... More
80 mm dia
2
-
-
... More
Providing and fixing heavy duty armoured cables 1.1 KVA grade including necessary support clamps at ceiling level and connection lugs complete in all respects.
-
-
-
... More
Power cable Copper 3 core 10 sq.mm
15
-
-
... More
Power cable Copper 3 core 6 sq.mm
15
-
-
... More
Power cable Copper 3 core 4 sq.mm
10
-
-
... More
Control cable copper 2 core 1.5 sq.mm
10
-
-
... More
Supply of MSEP vessel filter with all necessary accessories. Filter shall be suitable for minimum working pressure of 5 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, rinse drain, vacuum breaker etc. The MS sheet thickness for shell shall be min. 8 mm and for dishes shall 10 mm. The internal surfaces of tank shall be treated with epoxy coaing and external surface with primer and anticorrosive enamel paint (Min. 2 coats). with frontal piping shall be 100 mm dia MSEP along with valves PN 1.0, test cock, air inlet for back washing and pressure gauges at inlet and outlet.
Dual Media Filter For Domestic Water Supply
Capacity- 1250 LPH
Filtration rate- 16000 LPH/Sqm.
Filter dia approx. - 400 MM
Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm
1
-
-
... More
Activated Carbon Filter For Domestic Water Supply
Capacity- 1250 LPH
Filtration rate- 16000 LPH/Sqm.
Filter dia approx. - 400 MM
Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm
1
-
-
... More
Supply Installation,Testing & Commissioning of "Cation" apex thermocon Water Softener fabricated from MS plate as per IS: 2825 (minimum thickness of shall 6 mm and dished end 8 mm) complete with initial charge of resins , GI class 'C' face piping, CI butterfly valves, pressure gauge, hydraulic brine injector, accessories, painting inside with epoxy paint, including 500 liters capacity PVC / HDPE brine tank suitable for 2 regeneration capacity, testing and commissioning complete with resins of approved quality and make.
Hardness- Inlet- 500-600 PPM
Outlet- Less than 100 PPM
Capacity- 1250 LPH
Regeneration period 12 hrs.
Quantity of soft water between two regenerations = 15000 lit
Working pressure: 3.0 Kg/sq cm. Test pressure : 4. 5 Kg/sq cm
1
-
-
... More
Supply, installion, testing and commissioning of Hot Water Generation Plant of 15000 LPD with Packaged type Air to Water Heat Pump. These units shall be completely factory assembled including 2 Nos. Scroll Hermatically Sealed Scroll Compressor(s), evaporator, Condenser and Microprocessor Control Panel etc with R410 Referigerant and COP between 3-4. The Heat Pump shall have inbuilt hot water heat exchanger, pumps, valves. expansion valve, integrated CIP system and other accessories.The Heat Pump should be capable of producing hot water at minimum 60°C temperaure at outlet (condenser circuit) temperatures at 10°C ∆T. The Machine should have an operating ambient temperature range of -30°C to 40°C with heating element 20KW including electrical panel complete.. Location: Pump Room
a. Built in electric panel as per safety norms as manufacturer standard.
b. All other mountings, fittings & controls with all accessories and safeties c. All other mounting, fittings and controls.
d. Suitable for electric supply of 415 + 10% volts & 50 Hz.
e. All interconnecting wiring / cabling between heat pump and electrical panel.
f. The Heat pump shall have an in-built facility to start / stop depending on variation in demand at different periods.
g. System shall be complete with SS 304 Tank of 2 Hrs Storage Capacity, Primary and Seconary Circualtion pumps, Heat Exchangers, Return Recirculation Pump, interconnecting piping, valves and all accessories as required.
h. System shall have 20% of total capacity in electrical heating as standby.
i. System shall have an integrated Solar Heating system with 20% of total capacity for energy saving including Flat Plate Solar Panels, Mixing Tanks, Recirculation Pumps, etc
Heating capacity : Approx. 100 KW (2 working + 1 standby)
(50KWx2W+50KWx1S)
Hot Water Storage Tank with insulation complete : 4000 Ltrs
1
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
SUBHEAD- I: DISTRIBUTION BOARD
-
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 way, Double door
1
-
-
... More
8 way, Double door
1
-
-
... More
12 way, Double door
1
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
-
-
-
... More
4way Double door
1
-
-
... More
6 way Double door
6
-
-
... More
8 way Double door
6
-
-
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps
1
-
-
... More
63 amps
1
-
-
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
63 amps
13
-
-
... More
upplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
252
-
-
... More
Providing and fixing 125A capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.
5
-
-
... More
Supplying and fixing following rating, four pole, three phase and neutral, 415 volts, residual current circuit breaker ( RCCB), having a sensitivity current upto 30 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc as required.
-
-
-
... More
63 amps
6
-
-
... More
SUB-HEAD - II : INTERNAL WIRING
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
Group - C
403
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1400
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1306.67
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
70
-
-
... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
100
-
-
... More
4 x 10 sq.mm + 2 x 6 sq.mm. earth wire
100
-
-
... More
4 x 16 sq.mm + 2 x 6 sq.mm. earth wire
100
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in residential buildings).
112
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
66
-
-
... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make:KEI,Worldcab,RR Kable,Bonton
990
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make:KEI,Worldcab,RR Kable,Bonton
495
-
-
... More
Supplying and fixing of call bell / buzzer suitable for single phase,230 volt complete as required.
1
-
-
... More
SUB-HEAD III - FANS & LIGHT FIXTURES:
-
-
-
... More
Recessed luminaire ZEN 2x2 with LED(Light Emitting Diode), system power: 40W, colour temperature of 6000K, cool white, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, CRI80, luminous flux of 4000 lm, direct light emission, CRCA frame, polyester white powder coat applied over a 5-stage pre-treatment, prismatic diffuser for glare-free uniform light, integral electronic control gear, Protection class I, IP20, L = 595 mm, B = 595 mm, H = 70mm Product Code : ZEN2X2
74
-
-
... More
Deep Recessed Round downlight Ares with HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power: 15W, Luminous flux of luminaire 1800 lm, Colour temperature of 6000K, cool white, CRI 90, THD5%, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester powder white coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for homogenous light distribution, electronic control gear. Protection class II, IP 20
Ø = 120 mm, DA(Ø) = 110 mm, H = 50 mm.
Product Code : ARES15R
145
-
-
... More
LED Batten, Wall / Surface / Celling Mounted, system power: 20W, luminous flux of 2000 lm, direct light emission, 230V, Electronic Control Gear, 6000K, anodized aluminium housing, satin Diffuser,
Protection Class II, IP20 , L=1200mm, B=21mm, H=35mm.
Product Code : BATTENAL20
12
-
-
... More
Led Wall glazer 36W, 6000K, Beam angle is 24/36° , Sleek and high quality extruded aluminum construction IP65 rated, Aluminium Housing, Body Colour : Grey. Dimensions(LXWXH)mm : 1000X40X80mm.
Product Code : NE WW HV V 36
50
-
-
... More
Led 2X2 Cleanroom 40W Recess-mounting TOP-opening LED cleanroom IP65 ,zeromaintenance
luminaire having highly translucent opal diffuser is a perfect energy-saving solution for F&B and Pharma industries. 6000K. LXW : 595X595mm , Cut-out : 575x575, H : 80mm
Product Code : CLEANROOM2X2
136
-
-
... More
LED bulkhead with LED (Light Emitting Diode) system power: 10W, luminous flux of luminaire 800lm, 6000K, cool white, CRI 80, 230V, Direct light emission, Aluminium housing, opal diffuser, integral electronic control gear, Protection class I, IP65, IK08, L=200 mm, B=100mm, H=50mm
Product Code : BULKH10
10
-
-
... More
Pendant luminaire Ring LED (Light Emitting Diode) system power: 36W, Luminous flux of luminaire 4320 lm, Colour temperature of 6000K, cool white, CRI 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire profile in aluminium, White coloured powder coated, opal diffuser for a homogenous light distribution, internal wiring, Electronic control gear, Protection class I, IP20,
Dia : 450 mm, W : 60mm, H : 55 mm
Product Code : RING450
5
-
-
... More
LED Flood light fitting 50W RGBW IP65 made up of high pressure die cast aluminium body with embossed logo, corrosion resistance powder coating with PMMA secondary lens with 60 degree beam angle for effective distribution. Colour temperature: – RGBW . Product Code : FLOOD50RGBW
30
-
-
... More
LED Linear Wall Washer 20 Watt LED Light fitting RGBW complete with all accessories, housing made of Aluminium, IP65.
Product Code : WALLWASHERRGBW
32
-
-
... More
LED Street Light 60W, 6000K, IP65 Aluminium Housing, Luminaire on existing 7.5 Mtr pole .
Product Code : STREET60
4
-
-
... More
LED Bollard HALF T Shape 12W, 6000K cool white, IP65 , suitable for architectural outdoor lighting typically giving off light from the sides best suitable to illuminate walkways, steps or pathways. Aluminum Housing , Height : 500mm
Product Code : HALFTBOLLARD
6
-
-
... More
LED 40W post top light, 6000K cool white, IP65, having pleasing proportions and well-sculpted lines blends in seamlessly with its surroundings.Combining reliable corrosion resistant, weather proof construction made of pressure die cast aluminium housing powder coated graphite grey in color having robust design delivers to meet the landscaping needs. Dia : 400mm, H : 263mm, Pole OD : 78mm
Product Code : POST-TOP
2
-
-
... More
SITC Fresh air fan 250 mm
10
-
-
... More
SUB HEAD - IV : SERVER, DATA & NETWORKING
-
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
Telephone socket outlet
20
-
-
... More
TV antenna socket outlet
15
-
-
... More
Supplying and fixing of RJ-11/RJ 45 (Both Twin socket)I/O Telephone outlet with shutters along with suitable base plate,key stone and surface/concealed back boxes of adequate module size, etc comple in all respect.
15
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
1 or 2 Module (75mmX75mm)
25
-
-
... More
Supplying, laying, testing and commissioning of following size anealed tinned copper conductor PVC insulated and sheathed armoured copper telephone cables with suitable clamps, saddles and including making terminal joints complete as required.
-
-
-
... More
10 pair
200
-
-
... More
CABLING AND CONDUITING
-
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
260
-
-
... More
Supplying, fixing, connecting & testing of Telephone Tag Block krone type in a suitable size 1.6 mm thick dust and vermin proof Sheet steel enclosure duly painted by synthetic enamel over anti corrosive primer, lockable and hinged cover with provision for cable through glands complete in all respects.
-
-
-
... More
10 pair Krone
2
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
300
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required
-
-
-
... More
25 mm
250
-
-
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.25 mm
100
-
-
... More
SUB HEAD - V : LIGHTNING PROTECTION SYSTEM
-
-
-
... More
Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long, copper tube, having single prong at top, with 85mm dia 6 mm thick copper base plate including holes etc. complete as required.
14
-
-
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
110
-
-
... More
Providing and fixing GI tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as required. (for horizontal run).
220
-
-
... More
Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as required. (For vertical run.)
250
-
-
... More
Providing and fixing testing joint, made of 20mm x 3mm thick G.I. strip, 125mm long with 4 Nos. of G.I. bolts, nuts, check nuts and spring washers etc. complete as required.
110
-
-
... More
Providing and laying G.I. tape, 32mm x 6mm thick, from earth electrode directly in ground as required.
125
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement etc. with charcoal or coke and salt complete as required.
20
-
-
... More
SUB HEAD - VI : FIRE ALARM SYSTEM AND PUBLIC ADDRESS SYSTEM
-
-
-
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications
-
-
-
... More
Ten Loop Panel.
1
-
-
... More
Two Loop Panel.
1
-
-
... More
Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.
33
-
-
... More
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.
15
-
-
... More
Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.
10
-
-
... More
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
10
-
-
... More
Supplying, installation, testing & commissioning of intelligent aspiration detector for area coverage of minimum 5000 sq. ft. complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.
5
-
-
... More
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
4
-
-
... More
Supplying, installation, testing & commissioning of addressable phone control module complete as required.
4
-
-
... More
Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required.
1
-
-
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
5
-
-
... More
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.
5
-
-
... More
Supplying, installation, testing & commissioning of addressable strobe complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.
2
-
-
... More
Supplying, installation, testing & commissioning of intelligent interface unit BACnet/ Modbus protocol i.e. supplying communication links between building management system and fire alarm control panel complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.
2
-
-
... More
CABLING & WIRING
-
-
-
... More
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
750
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
180
-
-
... More
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
500
-
-
... More
PUBLIC ADDRESS SYSTEM
-
-
-
... More
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
20
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
4
-
-
... More
Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.
5
-
-
... More
Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required.
5
-
-
... More
Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required.
1
-
-
... More
audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
1
-
-
... More
directional sound speaker with voice and integral audio amplifier with selectable sound pulse patterns complete as required.
1
-
-
... More
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
1
-
-
... More
CABLING & WIRING
-
-
-
... More
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
250
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
100
-
-
... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
1
-
-
... More
speaker cable Single pair, 2-core, 1.5 sqmm
150
-
-
... More
speaker cable Two pair, 2-core, 1.5 sqmm
200
-
-
... More
speaker cable Three pair, 2-core, 1.5 sqmm
100
-
-
... More
speaker cable Four pair, 2-core, 1.5 sqmm
100
-
-
... More
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
500
-
-
... More
SUB-HEAD-VII: CCTV
-
-
-
... More
1/2.8 '' 5 .1MP CMOS Starlight Sensor Dome Camera with effective 2592(H) X 1944(V) pixels, Motorized varifocal lens 2.7~13.5mm(F1.4) , Video Compression H.265, H.264,M-JPEG , Color: 0.08Lux)/F2.0, 0 Lux (IR On), IR Distance 80ft, True WDR 120dB , P Iris , Dual Streaming , Frame rate Upto 30FPS , Smart video Compression, Basic Analytics like Tripwire, Camera Tamper , Shake cancellation, Minimum 20 virtal lines and polygons included, Optional Video Content Analytics Complete Suite, Sutter speed Auto / Manual (1/15 ~ 1/60000), Slow Shutter(off, 2x~8x) ,3D DNR , Support SD Card , Audio Input & Output , Alarm Input & output , Polygon motion detection , Privacy masking, ONVIF Profile S , Ethernet port 10/100 Mbps, 12DC, PoE, Metal body, IP66 & IK 10 protection as per detail tender specification , Certificate UL, BIS, EN , FCC & RoHS. 3 Years Standard Warranty Make: Axis/ Wavesys/ Mobotix/ Arecont Vision
26
-
-
... More
1/2.8 '' 5 .1MP CMOS Starlight Sensor Bullet Camera with effective 2592(H) X 1944(V) pixels, Motorized varifocal lens 2.7~13.5mm(F1.4) , Video Compression H.265, H.264,M-JPEG , Color: 0.08Lux)/F2.0, 0 Lux (IR On), IR Distance 80ft, True WDR 120dB , P Iris , Dual Streaming , Frame rate Upto 30FPS , Smart video Compression, Basic Analytics like Tripwire, Camera Tamper , Shake cancellation, Minimum 20 virtal lines and polygons included, Optional Video Content Analytics Complete Suite, Sutter speed Auto / Manual (1/15 ~ 1/60000), Slow Shutter(off, 2x~8x) ,3D DNR , Support SD Card , Audio Input & Output , Alarm Input & output , Polygon motion detection , Privacy masking, ONVIF Profile S , Ethernet port 10/100 Mbps, 12DC, PoE, Metal body, IP66 & IK 10 protection as per detail tender specification , Certificate UL, BIS, EN , FCC & RoHS. 3 Years Standard Warranty 3 Years Standard Warranty Make: Axis/ Wavesys/ Mobotix/ Arecont Vision
6
-
-
... More
1/2.8'' 5 .1MP CMOS Starlight Sensor Long Distance Main In/Out Gate Bullet Camera with effective 2592(H) X 1944(V) pixels, Motorized varifocal lens 6~50mm(F1.4) , Video Compression H.265, H.264,M-JPEG , Color: 0.08Lux)/F2.0, 0 Lux (IR On), Smart IR Distance 120ft, True WDR 120dB , P Iris , Dual Streaming , Frame rate Upto 30FPS , Smart video Compression, Basic Analytics like Tripwire, Camera Tamper , Shake cancellation, Minimum 20 virtal lines and polygons included, Optional Video Content Analytics Complete Suite,, Sutter speed Auto / Manual (1/15 ~ 1/60000), Slow Shutter(off, 2x~8x) ,3D DNR , Support SD Card , Audio Input & Output , Alarm Input & output , Polygon motion detection , Privacy masking, ONVIF Profile S , Ethernet port 10/100 Mbps, 12DC, PoE, Metal body, IP66 & IK 10 protection , Certificate UL, BIS, EN , FCC & RoHS. 3 Years Standard Warranty Make: Axis/ Wavesys /Mobotix/ Arecont Vision
5
-
-
... More
Professional Video Control Operations Management Playback Recording Single Server Multiple Client Video Surveillance 64 bit Software with Sixteen channel camera licensce with unlimited clients supporting 5000+ Camera models and 15000 devices at SDK level , Onvif S supported, edge base recording , advance maps, advance event and action manager with streaming server supporting optional edge or server level analytics at extra charges and optional facial recognition with 2 year standard support pack included Make: Milestone/ Wavesys/ Genetec
2
-
-
... More
Tower Mount upto 16 Camera Channel Monitoring Workstation Single Socket Intel i10 Processor with 4GB Graphic Card, 20 TB HDD, 16GB DDR RAM. VCOMPRS Software Channel Prices extra Make: Milestone/ Wavesys/ HP/ Dell
2
-
-
... More
42" Monitor Bezel Thin 1080p HD LED Screen for live view and replay of recorded View with mounting stand & HDMI cable Make: Sony/ LG
2
-
-
... More
Storage NAS Box Drive ( H.265/ 60 days / 5 MP/ 15 fps) for cameras with Usable Capacity as mentioned in Qty Make: Seagate/ Western Digital
4
-
-
... More
Cable Accessories
-
-
-
... More
Supply, installation, testing & commissioning of 24 Port Layer 2 Managed Access POE switch with 20x1G Base-T PoE+ and 4x1G Base-T Ports.Should support switching fabric of 240 Gbps or more. Should support PoE+ with PoE budget of 300 W. Operating Temp: 0° C to +50° C Make: Cisco/ Juniper/ Allied Telesys
2
-
-
... More
Supply , Installation , Testing and Commisioning of 1KVA online UPS with inbuilt battery for field equipments, 30mins backp on full load with 3 yrs warranty. Make: TATA Libert/ APC/ Equivalent
2
-
-
... More
Supply fitting, fixing and testing of 9 U Wall/Pole mount weather proof rack for keeping switch & other items in the filed along with all required acessories . Make: Cisco/ Digilink/ Equivalent
4
-
-
... More
Supply , Installation , Testing and Commisioning of 1 Mtr Patch cord.
2
-
-
... More
Supplying and Laying of CAT-6 cable. Make: Polycab/ Finolex/ Molex/ R&M
600
-
-
... More
Supplying and Laying of 25mm PVC conduit with bands as required HMS ISI approved.
400
-
-
... More
Supplying and Laying of ISI Approved 2 Core 2X 1.5mm power cable. Make: Polycab/ Finolex/ Molex/ Beldon
360
-
-
... More
Supply, fitting, fixing and testing of 6 mtrs weather proof pole
6
-
-
... More
Supply of Furnitures, AC for control room
2
-
-
... More
Commissioning of the System
2
-
-
... More
Hard digging if required with Pipe for Cable
200
-
-
... More
SUB HEAD -EXTERNAL ELCTRIC WORKS
-
-
-
... More
Supply, installation, testing & commissioning of two 11Mtr. pole structure, 11KV with cross arms, suitable clamps, insulators, disc insulators, 11KV lightning arrestors, complete stay with insulator & wire, foundations, gang operated air break switch with extended handle, 11KV drop out fuses. This shall have termination arrangement for outgoing through HT XLPE cable of suitable size and necessary 6 inches dia GI pipe shall be provided for cable support complete in every way..11 kV HT 'H' pole as per specification & as described abov
1
-
-
... More
11 KV HT Metering Panel (SEB's) The instrument and relay panel fitted with: 1- digital voltmeter scaled 0-11000volt with 3 way and OFF selector switch.
1- digital Ammeter scaled 0-150 amps with 3 way and OFF selector switch.
1- Triple pole I.D.M.T. overcurrent & earth fault relay with two outer elements connected for overcurrent protection and the middle element for earth fault protection overcurrent, setting 50% - 200%, Earth fault setting 20% - 80% (51 and 51N).
"1 No. SEB approved digital Trivector meter with MDI in KVA of accuracy class - 0.5.
Note: The contractor shall get the Trivector meter , CTs' & PT tested by SEB and the charges for liasioning for the same will be paid extra."
One Set of Phase Indicating Lamps.
1- set of Red/Green indicating lamps for close and open position
1- Amber indicating lamp for auto trip 1- clear indicating lamp for trip circuit healthy
1- set of white indicating lamps one per phase 1 - blue indicating lamp for spring charged
2 Nos. indoor cable end box suitable for 3C x 300 sq.mm. 11 KV(E), aluminium conductor XLPE Ar. cable (Incoming & Outgoing cable).
Supply Rate for Metering Panel as described above Note: The contractor shall ensure that the above panel meets the requirement as insisted by Gujarat State Electricity Board authorities for satisfactory operation and as per the Drawings. If State electriity Board will Provide the HT meter with CT-PT Metering unit then this item NS-1.2 will not payed to the contractor.
1
-
-
... More
11 KV HT Switchboard
-
-
-
... More
HT PANEL-1
-
-
-
... More
Incomer
-
-
-
... More
1- Air insulated metal clad housing
-
-
-
... More
1- set of 3 phase PVC insulated copper busbars 630 amps
-
-
-
... More
6- Single pole cluster type isolating contacts; i.e. plug and switches
-
-
-
... More
1- Triple pole drawout truck mounted 11 kV 350 MVA, 630 amps Vacuum circuit breaker fitted with arc control devices.
-
-
-
... More
1- Trip free 230 V AC, motor charged spring release closing mechanism complete with necessary auxiliary switches emergency hand trip device and mechanical 'OFF' and 'ON' indicator.
-
-
-
... More
6 NO/NC contacts for remote ON/OFF/TRIP status
-
-
-
... More
1 - 24 volts DC shunt trip coil
-
-
-
... More
3 - Dual Core Cast resin Current transformers of ratio 75/5 Class 5P10 and Class 1.0, 15 VA burden for protection & metering.
-
-
-
... More
1- Strip heater with thermostat to prevent absorption of moisture
-
-
-
... More
1- 3 Phase cast resin horizontal draw out line potential transformer ratio 11000/√3 :110/√3 volts, connected star/star with H.V. and L.V. connections, H.V. and L.V. fuses, isolating plugs for H.V. and L.V. connection.
-
-
-
... More
The instrument and relay panel fitted with
-
-
-
... More
1- Square voltmeter of 96 x 96 mm scaled 0-11000 volt with 3 way and OFF selector switch.
-
-
-
... More
1- Square Ammeter of 96 x 96 mm scaled 0-75 amps with 3 way and OFF selector switch.
-
-
-
... More
1 no. energy analyser to measure voltage, current, power factor, frequency,kW/kVA, kWh, kVArh, kVAh,Real time,date with communication module.
-
-
-
... More
1- Triple pole numerical I.D.M.T. over current and earth fault relay, with two outer elements connected for over current and the middle element for earth fault protection, over current setting 50% - 200%, Earth fault setting 20% -80% and with instantaneous element on all 3 pole settings 500-2000% on over current and 200-800% on earth fault (51, 50, 51N & 50N)
-
-
-
... More
1 - Electro mechanical Master trip relay (86)
-
-
-
... More
1 - Electro mechanical Anti pumping relay (94)
-
-
-
... More
1 - Trip Circuit supervision relay.
-
-
-
... More
1- set Electro mechanical auxiliary relay for transformer fault ALARM for winding temperature conditions (63x)
-
-
-
... More
1 - no. circuit breaker control switch for electrical (T/N/C)
-
-
-
... More
1 - push button on front door for emergency trip
-
-
-
... More
1- set of Red/Green indicating lamps for close and open position
-
-
-
... More
1- Amber indicating lamp for auto trip
-
-
-
... More
1- clear indicating lamp for trip circuit healthy
-
-
-
... More
1- set of white indicating lamps one per phase
-
-
-
... More
1 - blue indicating lamp for spring charged
-
-
-
... More
incoming & outgoing - cable termination suitable for Raychem make cable joint to receive 11 KV XLPE cable 3 core 300 sqmm
-
-
-
... More
The switchboard shall be complete with all interconnections, label wiring, etc as required and as per direction
-
-
-
... More
Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries for the panel
-
-
-
... More
11 KV Single panel VCB (Incoming cum outgoing)Switchboard as described above
1
-
-
... More
1- Triple pole numerical I.D.M.T. over current and earth fault relay, with two outer elements connected for over current and the middle element for earth fault protection, over current setting 50% - 200%, Earth fault setting 20% -80% and with instantaneous element on all 3 pole settings 500-2000% on over current and 200-800% on earth fault (51, 50, 51N & 50N)
1 - Electro mechanical Master trip relay (86)
1 - Electro mechanical Anti pumping relay (94)
1 - Trip Circuit supervision relay.
1- set Electro mechanical auxiliary relay for transformer fault ALARM for winding temperature conditions (63x)
1 - no. circuit breaker control switch for electrical (T/N/C)
1 - push button on front door for emergency trip
1- set of Red/Green indicating lamps for close and open position
1- Amber indicating lamp for auto trip 1- clear indicating lamp for trip circuit healthy
1- set of white indicating lamps one per phase 1 - blue indicating lamp for spring charged
incoming & outgoing - cable termination suitable for Raychem make cable joint to receive 11 KV XLPE cable 3 core 300 sqmm
The switchboard shall be complete with all interconnections, label wiring, etc as required and as per direction
Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries for the panel
11 KV Single panel VCB (Incoming cum outgoing)Switchboard as described above
1
-
-
... More
Supply, erection, testing and commissioning of 230V, single phase 2 wire AC to 24V DC Batteries charger with semiconductor/IGBT fullwave rectifier with auto /manual float cum boost facility complete with 24V DC, 120 AH sealed maintenance free batteries including one no. distribution board having 63 Amps DP MCCB as incomer and 12 Nos. 20/16A DP MCB's (D.C. duty) as outgoing complete as required and as per technical specifications.
2
-
-
... More
11/.433 KV Transformer: Supply, installation, testing and commissioning of 500 kVA, 11000/433 volts Deta/Star, vector group DYN11, outdoor mounting, oil cooled, ONAN transformer with On Load Tap Changers (OLTC) having AVS relay and RTCC for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote manual operation of OLTC, suitable for incoming voltage variation of +5% to –15% in 16 steps to give a constant secondary voltage. The transformer shall be provided with fittings, accessories, protection, first filing of oil etc. including Buchholz oil temperature alarm/trip protection in LV chamber complete as per specifications and as required. The transformer shall be provided with arrangement to terminate XLPE cable on HT side and to connect Aluminium Bus Duct on LT side, complete as required. The losses of the Transformer should be as per latest ECBC guideline or As per Latest IS:1180 & Transformer efficiency type -2.
1
-
-
... More
Supply, installation, testing & commissioning of 500 KVA continuous rating,silent type (Prime Rating) radiator cooled diesel generating set alongwith complete fuel oil piping, antivibration mounts, base frame, required hardware, Batteries, Engine control panel with accessories, residential silencer, flexible connection, bellow / expansion joints etc.complete with all associated equipment / work as per specifications or requirements as per site.
DG set shall be supplied with built in acoustic enclosure as per pollution control board norms and as per specification complete in all respect.The DG Set shall be complete with PCC (Power Command Control) or equivalent DG Controller module suitable for AMF (auto-mains failure), Auto Load Sharing & Interface with PLC mounted in the LT panel for ACB/MCCB switching and Auto load sensing and Auto load Management, including communication card and networking gateway and software as required. Note: Item rate shall be include 1st time filling of Lube oil & diesel and also include the cable termination box suitable for termination of 4 Runs 3.5 C X 300 Sqmm. XLPE AL cables at alternator.
Battery charger for 1X500 KVA DG sets Supply, installation, testing & commissioning of Battery Charger as described in Specifications and described below:
RatingAC Input: 230 V + 10% AC 50 Hz single phase.
DC Output: To float / boost charge the batteries (with required AH as per D.G. rating) and also supply a continuous load or as per offered DG set requirement.Current Rating: 30 AFloat Mode: 27.0 V nominal (Adjustable) between 24-28.0 V.
Boost Mode: 29.0 V nominal (Adjustable) between 24-32.0 V
Voltage Regulation:+ 2% for AC input variation of 230 V + 10%. Frequency Variation of 50 Hz + 5% and DC load variation 0-100%
Ripple:Less than 5%
Battery Charger Unit as described above
Day Oil Tank
1
-
-
... More
Supply, installation, testing & commissioning of 990 litres capacity day oil storage tank fabricated from 6 mm thick MS plates. Tank shall include 450 mm ID manhole cover, level indicator with duly calibrated scale and flanged connection for inlet, outlet, overflow drain and probe provision for level controller & breather. : Oil Piping
1
-
-
... More
Supply, installation, testing & commissioning of the following MS class ‘C’ pipes cut to required lengths and installed with all welded joints. Providing the necessary fittings like elbows, tees and reducers, sockets, hot dip galvanized supports and accessories including ceiling Hanger, Hardware complete as per site requirement.
45
-
-
... More
25 mm dia MS pipes
45
-
-
... More
Providing 25 mm dia. ball valves
3
-
-
... More
Exhaust Piping & Thermal Insulation
-
-
-
... More
Supply, installation, testing & commissioning of MS class-C exhaust pipe as per IS 1239 and all fixing accessories and hardwares. The exhaust pipes shall be insulated with 75 mm thick mineral wool (density 150 kg/m3) insulation wrapped in chicken mesh and clad with 26 gauge aluminium sheet including all hot dip galvanized support structural as required.
-
-
-
... More
300 mm dia MS class-C pipe & 75mm thick mineral wool insulation as per description given above.
20
-
-
... More
180 mm dia MS class-C pipe & 75mm thick mineral wool insulation as per description given above.
14
-
-
... More
Supply, installation, testing & commissioning of miscellaneous structural support (MS angle iron / MS Plates / MS Channel etc.) for horizontal/vertical exhaust piping at suitable interval as per approved Shop drawing including fabrication, hardwares / flanges and painting (2 coats of primer and 2 coats of enamel paint) complete in all respect.
660
-
-
... More
Supply, installation, testing & commissioning of 300 mm dia Flexible Bellows
2
-
-
... More
Supply, installation, testing & commissioning of 180 mm dia Flexible Bellows
1
-
-
... More
Supply, installation, testing & commissioning of Thermal Cladding of Silencers
1
-
-
... More
Supply, installation, testing & commissioning of following 1100 volt grade XLPE PVC insulated sheathed copper conductor armoured cable including supplying of bimettalic crimping lugs, double compression glands with earthing. as per specification
-
-
-
... More
4 C x 2.5 sq.mm control cable
30
-
-
... More
12 C x 2.5 sq.mm control cable
10
-
-
... More
Control Cables Termination:
-
-
-
... More
Supply, installation, testing & commissioning of all materials and making terminations of control cable terminations for control cables as per item 7.6 above complete with single brass compression glands, copper lugs etc. as required:
-
-
-
... More
4 C x 2.5 sq.mm control cable
15
-
-
... More
12 C x 2.5 sq.mm control cable
20
-
-
... More
SUB-HEAD- IV- LT PANELS & DISTRIBUTION BOARDS
-
-
-
... More
The contractor shall consider the following details in their item rates, wherever required:
-
-
-
... More
Supporting rigid steel framework.
-
-
-
... More
Cubicle type, 14 gauge CRCA sheet steel enclouser.
-
-
-
... More
Complete with interconnections and distribution bus bars.
-
-
-
... More
Proper bonding to earth.( at two Points)
-
-
-
... More
Painting/lettering on Breakers and distribution boards, the location they serve, providing on each panel its circuit diagram.
-
-
-
... More
Providing cable clamps / supports within distribution boards cable alley.
-
-
-
... More
TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link.
-
-
-
... More
All MCB’s shall be of minimum 10 KA breaking capacity.
-
-
-
... More
All motor feeders MCCBs shall be of motor duty.
-
-
-
... More
Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.
-
-
-
... More
Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-1993.
-
-
-
... More
IP 42 for indoor panels.
-
-
-
... More
IP 54 for kitchen and laundry panels.
-
-
-
... More
IP 55 for outdoor panels
-
-
-
... More
All MCCB’s shall be provided with operating mechanism for door interlock.
-
-
-
... More
Current density of aluminium shall be 1 sq mm for 1.0 amps for rated current of bus bars and current density of copper shall be 1 sq.mm for 1.25 amps for rated current of bus bars.
-
-
-
... More
Tinned copper earth bus shall be provided through out the length of each board.
-
-
-
... More
All measuring instruments (Meters) shall be of digital electronic with LED of approved make and compatible with BAS.
-
-
-
... More
All hinged door shall be earthed through 4.0 sq mm tinned braided copper wire.
-
-
-
... More
All panels shall have provision of the following:
-
-
-
... More
Pad locking of Switch board doors.
-
-
-
... More
Pad locking of MCCB’s handles in “OFF” Position.
-
-
-
... More
Additional set of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for BAS including space required for various transducers in Main Switch Board sections. Only transducers shall be supplied by BAS contractor.
-
-
-
... More
All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic and inductive (motor) load shall be of type “C” characteristic and discharge lamps and UPS etc. shall be of type D characteristic.
-
-
-
... More
All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier formation.
-
-
-
... More
All PTs / control transformer shall be provided with centre tap earth secondary.
-
-
-
... More
All DOL & Star-Delta Starters shall be provided with SPPR (single phase preventor relay) and 2 nos. of Aux.Contacts for Remote operation/monitor.
-
-
-
... More
The Panel fabricator shall provide Al./ Copper Bus-bars link from Breakers wherever more than two nos. of cables are terminated in the breakers.
-
-
-
... More
Readymade 16 SWG Sheet steel Enclosure with cutout For MCBs
-
-
-
... More
The breaking capacity of MCCB’s are mentioned panel wise. All MCCB’s shall be with thermal magnetic releases upto 250 amps and miroprocessor based above 250 amps capacity, unless specified otherwise.
-
-
-
... More
ACB shall comply with standards IS/IEC 60947-1 & 2
-
-
-
... More
ACB shall have a rated operational voltage of 415V AC, rated insulation voltage of 1000 volts AC, rated impulse voltage of 12kV.
-
-
-
... More
ACB shall have a Ready to close mechanism preferably having a ready to close mechanical indication on front of ACB. All EDO ACBs ready to close indication contact
-
-
-
... More
ACBs upto 3200A shall be provided with top horizontal and bottom vertical terminal adapters on both sides for proper cable connections/bus duct connections.
-
-
-
... More
MCCB shall have a rated operational voltage (Ue) of 415V, insulation voltage (Ui) of 690 V (AC 50/60 Hz) & impulse voltage (Uimp) of not less than 8kV.
-
-
-
... More
MCCBs shall be current limiting type having a double break design
-
-
-
... More
Protection Releases Microprocessor based (PRMB) & Thermal magnetic (PRTM) shall be as described below .
-
-
-
... More
Protection Release Microprocessor Based (PRMB-1) For ACB
-
-
-
... More
Over-current/long time protection range 40% - 100 % with Time setting
-
-
-
... More
short circuit /short time protection range 100% - 1000 % with Time setting
-
-
-
... More
Instantaneous short circuit Protection range 150% - 1200 % with Time setting
-
-
-
... More
Earth Fault Protection range 20% - 100 % with Time setting
-
-
-
... More
ZSI(Zone Selectivity Interlocking)
-
-
-
... More
Measurements
-
-
-
... More
Voltage
-
-
-
... More
Current
-
-
-
... More
Energy
-
-
-
... More
Protection Release Microprocessor Based (PRMB-3) For MCCB
-
-
-
... More
Overload protection
-
-
-
... More
short circuit protection
-
-
-
... More
Protection Release Thermal-Magnetic Based (PRTM) For MCCB
-
-
-
... More
Over-current
-
-
-
... More
Short circuit
-
-
-
... More
Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 25 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks and including GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below.
-
-
-
... More
(Note:The contractor may select the next higher fault rating of MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maximum fault level of the panel).
-
-
-
... More
MAIN LT Panel
-
-
-
... More
IP:42
-
-
-
... More
INCOMER FROM TRANSFORMER
-
-
-
... More
BUSBAR-1
-
-
-
... More
From 500 KVA Transformer
-
-
-
... More
1 No. 800A 4 pole microprocessor based EDO, ACB(50kA) with integral protection as per PRMB-1 mentioned in Premable
-
-
-
... More
1 set of 800/5A, 15 VA, class-1 CTs for APFC relay
-
-
-
... More
1 set of R,Y,B phase indicating lamps each with 1 nos. 2A SP MCBs.
-
-
-
... More
1 No. (0-500V) Voltmeter with Built-in VSS with 1 nos. 2A SP MCB
-
-
-
... More
1 No. (0-800A) Ammeter with ASS with 1 nos. 800/5A CT's
-
-
-
... More
1Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.
-
-
-
... More
240 V AC Motor wound spring closing mechanism
-
-
-
... More
1 - 24 volts DC shunt trip coil
-
-
-
... More
6 nos NO/NC contacts for remote opening & closing
-
-
-
... More
Terminals to receive XLPE insulated Aluminium cables
-
-
-
... More
Class – B transient voltage surge suppression devices suitable for 3 phases as per specification.
-
-
-
... More
Multifunction meter with display of V,I,PF,Energy,Power, Harmonics up to 15th order & %THD with RS485 port
-
-
-
... More
One set of 1 nos. 800/5A CT's for metering
-
-
-
... More
INCOMER FROM DG Set
-
-
-
... More
From 500 KVA DG SET
-
-
-
... More
1 No. 800A 4 pole microprocessor based EDO, ACB(50kA) with integral protection as per PRMB-1 mentioned in Premable
-
-
-
... More
1 set of R,Y,B phase indicating lamps each with 1 nos. 2A SP MCBs.
-
-
-
... More
1 No. (0-500V) Voltmeter with Built-in VSS with 1 nos. 2A SP MCB
-
-
-
... More
1 No. (0-800A) Ammeter with ASS with 1 nos. 800/5A CT's
-
-
-
... More
1 Set- of ON/OFF/Trip/ Spring Charged & Trip circuit healthy indicating lamps.
-
-
-
... More
240 V AC Motor wound spring closing mechanism
-
-
-
... More
6 nos NO/NC contacts for remote opening & closing
-
-
-
... More
Terminals to receive XLPE insulated Aluminium cables
-
-
-
... More
Class – B transient voltage surge suppression devices suitable for 3 phases as per specification.
-
-
-
... More
Multifunction meter with display of V,I,PF,Energy,Power, Harmonics up to 15th order & %THD with RS485 port
-
-
-
... More
One set of 1 nos. 800/5A CT's for metering
-
-
-
... More
BUS BARS
-
-
-
... More
Electrolytic high conductivity Aluminium three phase and neutral busbars with earthing rated at 1000 amps having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 50 kA at 415 volts. The neutral busbar is to be of 50% capacity.
-
-
-
... More
OUTGOINGS-
-
-
-
... More
2No. 400A TP+NL MCCB (36 KA) complete with:
-
-
-
... More
1 nos 400/5A Class - 1.0, 15 VA Burden CT's for metering
-
-
-
... More
ON / OFF indicating lamps with MCB as backup protection.
-
-
-
... More
Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified.
-
-
-
... More
2No. 250A TP+NL MCCB (25 KA) complete with:
-
-
-
... More
1 nos 100/5A Class - 1.0, 15 VA Burden CT's for metering
-
-
-
... More
ON / OFF indicating lamps with MCB as backup protection.
-
-
-
... More
Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified.
-
-
-
... More
3No. 100A TP+NL MCCB (16 KA) complete with:
-
-
-
... More
1 nos 63/5A Class - 1.0, 15 VA Burden CT's for metering
-
-
-
... More
ON / OFF indicating lamps with MCB as backup protection.
-
-
-
... More
Digital Three Phase, four wire, multifunction Meter with V, A, KWH, 485 Communication Port, Class of Accuracy-1 as specified.
-
-
-
... More
3No. 63A TP+NL MCCB (16 KA) complete with:
-
-
-
... More
BUS COUPLER:-
-
-
-
... More
1 No. 800A FP ACB (50 KA) with PRMB-1 with Microprocessor Based release with all required accessories.
-
-
-
... More
1 Set of Breaker ON-OFF-TRIP, Spring charged indication Lamps as required.
-
-
-
... More
BUSBAR
-
-
-
... More
PLC
-
-
-
... More
PLC FEEDER- AUTO ON/OFF AND AUTO LOAD MANAGEMENT :
-
-
-
... More
Hardware using PLCs for Monitoring of all Electrical Software and for operations, controlling and interlocking Parameters of 2 Nos. DG & 1 Nos. Transformer with Window based software & Engineering & Software Development. Required Aux. Relays, Push Buttons & Indication lamps, 1KVA UPS for Black start & maintenance free Batteries, Power monitors, Programmable Logic controller, Annunciator and status Fascia, MIMIC with LED circuit etc as required completing the system.(As per SLD).
-
-
-
... More
The Switchboard with Logic control panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as required.
-
-
-
... More
Note: Incomer from LT Supply, D.G. set & Bus coupler shall be electrically & mechanically interlocked.
-
-
-
... More
Main LT Panel as described above
1
-
-
... More
Capacitor Panel (170 kVAR)
-
-
-
... More
IP:42
-
-
-
... More
INCOMER
-
-
-
... More
1 No. 630A TPN ACB (50 KA) as per PRMB-1 as mentioned in Preamble.
-
-
-
... More
METERING & INDICATION
-
-
-
... More
1 set of phase indicating lamps
-
-
-
... More
1 No. 10 step-Microprocessor APFC controller/Relay(Dual source purpose) shall continuously monitoring all three phases and LCD displays for various Electrical Parameters like voltage, input current, capacitive current, KVA demand, KW, Power Factor, self diagnostic error code indication with printout facility of the above with RS 232/RS 485 port. Controller should mounted on the front side of the panel. Capacitor bank having 3 phase MPP based mix dieelectric low loss ISI marked power capacitor and provided with contactor based switching to suppress switching of inrush current and reducing harmonics capacitor life.
-
-
-
... More
BUS-BAR
-
-
-
... More
1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves
-
-
-
... More
OUTGOINGS
-
-
-
... More
2 Nos.of 125A TP MCCB (25 KA) each with PRTM
-
-
-
... More
2 Nos. 50 KVAR capacitor Bank each with 7% harmonic & discharge resistor with thyristor module suitable capacity to carry expected current continuosly.
-
-
-
... More
5 Nos.of 63A TP MCCB (25 KA) each with PRTM
-
-
-
... More
5 Nos. 25 KVAR capacitor Bank each with 7% harmonic & discharge resistor with thyristor module suitable capacity to carry expected current continuosly.
-
-
-
... More
5 Nos.of 32A TP MCCB (25 KA) each with PRTM
-
-
-
... More
5 Nos. 10 KVAR capacitor Bank each with 7% harmonic & discharge resistor with thyristor module suitable capacity to carry expected current continuosly.
-
-
-
... More
Capacitor Panel (170 kVAR) as described above
1
-
-
... More
Note:The capacitor panel shall also stipulate the following
-
-
-
... More
(i) All the capacitors shall be suitable for 525 V
-
-
-
... More
(ii) Necessary control and firing card with proper wiring and lugs of the required rating to be provided.
-
-
-
... More
(iii) Heavy duty exhaust fans to be provided for cooling Thyristors.
-
-
-
... More
(iv) LED indication for number of capacitor banks ‘ON & Power Factor lagging or leading.
-
-
-
... More
(v) The APFC shall be protected from following
-
-
-
... More
* over-voltage & voltage unbalance
-
-
-
... More
* Over temperature-system should be in standby mode and automatically restart after above condition restored.
-
-
-
... More
* Total Harmonic Distortion
-
-
-
... More
FLOOR PANELS
-
-
-
... More
INCOMER
-
-
-
... More
1 No. 250amps 4P MCCB(25KA) with thermal Magnetic release (PRTM) with Class-C transient voltage surge suppression device suitable for 3 phases as per specifications.
-
-
-
... More
METERING & INDICATION for each Incomer
-
-
-
... More
1 set of R,Y,B phase indicating lamps
-
-
-
... More
Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD) with RS-485 Port.
-
-
-
... More
Sets of 250/5A, CL-1, 15VA CTs for measuring.
-
-
-
... More
Sets of phase indicating lamp with 2A control MCBs.
-
-
-
... More
BUS-BAR
-
-
-
... More
200A TPN Aluminium Bus Bar with colour coded PVC Sleeves
-
-
-
... More
OUTGOINGS
-
-
-
... More
8 No. 40amps FP MCB
-
-
-
... More
8 No. 63amps FP MCB
-
-
-
... More
FLOOR PANEL AS DESCRIVED ABOVE
1
-
-
... More
SUB HEAD- V : EARTHING
-
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
14
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
8
-
-
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
140
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe FRLSom earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
100
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
100
-
-
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
80
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
750
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
100
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
100
-
-
... More
SUB HEAD-VI : CABLE & END TERMINATIONS
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
350
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
20
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
24
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
28
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
Upto 35 sq. mm
120
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
100
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
50
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
50
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
-
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
350
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
50
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
30
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with 1mm thick saddle)
30
-
-
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
30
-
-
... More
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
20
-
-
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
20
-
-
... More
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
15
-
-
... More
Laying of one number XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.
-
-
-
... More
Above 120 sq. mm and upto 400 sq. mm
15
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
3½ X 185 sq. mm (57mm)
6
-
-
... More
3½ X 240 sq. mm (62mm)
3
-
-
... More
3½ X 300 sq. mm (70mm)
2
-
-
... More
4 X 10 sq. mm (25mm)
6
-
-
... More
4 X 16 sq. mm (28mm)
6
-
-
... More
4 X 25 sq. mm (28mm)
8
-
-
... More
3½ X 50 sq. mm (35mm)
4
-
-
... More
3½ X 70 sq. mm (38mm)
16
-
-
... More
3½ X 95 sq. mm (45mm)
4
-
-
... More
3½ X 120 sq. mm (45mm)
5
-
-
... More
3½ X 150 sq. mm (50mm)
3
-
-
... More
2 X 6 sq. mm (19mm)
8
-
-
... More
2 X 10 sq. mm (19mm)
2
-
-
... More
HT CABLE END TERMINATION
-
-
-
... More
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.
-
-
-
... More
300 sq. mm
7
-
-
... More
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.
-
-
-
... More
300 sq. mm
1
-
-
... More
Supply of HT cable
-
-
-
... More
Supplying of following sizes of XLPE aluminium conductor, corss linked polythylene, individual core screwed, flat steel strip armoured, PVC sheathed cable of 11KV grade (earthed) comforming to IS: 7098 (Part 2),with uptodate ammendment complete as required.
-
-
-
... More
3 C x 300 Sq.mm XLPE HT cable (Earthed)
100
-
-
... More
Supply of MV cable
-
-
-
... More
Supply, following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor/copper conductor power/ multicore control armoured cable of 1.1 KV grade.
-
-
-
... More
3 ½ C - 300 sq mm Aluminium
150
-
-
... More
3 ½ C - 240 sq mm Aluminium
60
-
-
... More
3 ½ C - 185 sq mm Aluminium
20
-
-
... More
3 ½ C - 150 sq mm Aluminium
10
-
-
... More
3 ½ C - 120 sq mm Aluminium
60
-
-
... More
3 ½ C - 95 sq mm Aluminium
20
-
-
... More
3 C - 70 sq mm Aluminium
350
-
-
... More
3 ½ C - 50 sq mm Aluminium
50
-
-
... More
3 ½ C- 35 sq mm Aluminium
50
-
-
... More
4C- 25 sq mm Aluminium
20
-
-
... More
4C- 16 sq mm Aluminium
30
-
-
... More
4C- 10 sq mm Aluminium
30
-
-
... More
4C- 6 sq mm Aluminium
30
-
-
... More
3C- 6 sq mm Aluminium
20
-
-
... More
3C- 10 sq mm Aluminium
250
-
-
... More
2C- 6 sq mm Aluminium
50
-
-
... More
Supply of following sizes XLPE insulated (Heavy duty) Aluminium or Copper conductor armoured cables suitable for working voltage upto and including 1100 Volts complete as required and as per specifications.
-
-
-
... More
2 x 6 sq.mm
1
-
-
... More
4 x 6 sq.mm
1550
-
-
... More
4 x 10 sq.mm
650
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
1500
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
Upto 35 sq. mm
50
-
-
... More
Termination of the following sizes of XLPE insulated Aluminium/ Copper conductor cable including providing terminal lugs,double compression gland , crimping the joints ,providing insulation tape,effecting terminal connections to the equipment complete as required.
-
-
-
... More
4 x 6 sq,mm, Al conductor cable
80
-
-
... More
Supply, laying and termination of the following sizes of 650/1100 volts grade PVC insulated copper conductor wires in existing conduits including end terminations with copper lugs.
-
-
-
... More
3 x 2.5 sq.mm. Copper conductor ,PVC insulated PVC sheathed wires
200
-
-
... More
Supplying and fixing in position of the following sizes of GI conduit buried in ground 600 mm deep including all accessories complete as required and as per specifications.
-
-
-
... More
25 mm dia GI conduit
100
-
-
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
... More
100mm dia
60
-
-
... More
250mm dia
50
-
-
... More
Supply,fixing and laying of Heavy duty PVC pipes complete buried in floor with joints and other accessories as required.
-
-
-
... More
63 mm dia, 2mm thick
250
-
-
... More
Supply, erection, testing and commissioning of 7.5 M high Tubular pole as per Technical specifications and with following components :-
-
-
-
... More
Including supply and installation of 6 ways-20A connector & 6A MCB mounted on 6mm thick painted M.S/GI plate, insulated, and fixed inside the pole suitable for termination of armoured aluminium cable as required and wiring to Luminaries from the 6A MCB, with 3x2.5 sq.mm. PVC insulated copper, stranded conductor (P+N+PE) double sheathed wire including terminations.
-
-
-
... More
7.5 meters high tubular pole with single arm of length 1.5 meter, smoothly curved making an angle of 10 deg to 15 deg with the horizontal plane complete as required.
2
-
-
... More
Supply, erection, testing and commissioning of 6 M high Tubular pole as per Technical specifications and with following components :-
-
-
-
... More
Including supply and installation of 6 ways-20A connector & 6A MCB mounted on 6mm thick painted M.S/GI plate, insulated, and fixed inside the pole suitable for termination of armoured aluminium cable as required and wiring to Luminaries from the 6A MCB, with 3x2.5 sq.mm. PVC insulated copper, stranded conductor (P+N+PE) double sheathed wire including terminations.
-
-
-
... More
6 meters high tubular pole with single arm of length 1.5 meter, smoothly curved making an angle of 10 deg to 15 deg with the horizontal plane complete as required.
2
-
-
... More
Supply, erection, testing and commissioning of 4.5 M high Tubular pole as per Technical specifications and with following components :-
-
-
-
... More
Including supply and installation of 6 ways-20A connector & 6A MCB mounted on 6mm thick painted M.S/GI plate, insulated, and fixed inside the pole suitable for termination of armoured aluminium cable as required and wiring to Luminaries from the 6A MCB, with 3x2.5 sq.mm. PVC insulated copper, stranded conductor (P+N+PE) double sheathed wire including terminations.
-
-
-
... More
4.5 meters high tubular pole with single arm of length 1.5 meter, smoothly curved making an angle of 10 deg to 15 deg with the horizontal plane complete as required.
40
-
-
... More
Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 72W LED Luminaire on existing 7.5 Mtr pole as per specifications,complete in all repects including nipple for fixing of Light fixture on pole.
2
-
-
... More
Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 40W LED Luminaire on existing 4 Mtr pole as per specifications,complete in all repects including nipple for fixing of Light fixture on pole.
40
-
-
... More
Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 9W LED Bollard Light.
8
-
-
... More
Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of GATE LIGHT
4
-
-
... More
Supply,Receiving and fixing in position, effecting proper connections, testing and commissioning of 60W LED STREET Light.
2
-
-
... More
F.P. (External Lighting)
-
-
-
... More
Design, manufacture,Supply, Installation, testing and commissioning at works of Double door panel fabricated with minimum 2mm thick CRCA sheet, Conform to IS Specification, with IP-55 enclosure protection, as per IS-2137(Revised), floor mounting free standing on a suitable massanory pedestal outdoor type panel,provided with hinged detachable and lockable outer opening doors with the following incoming/outgong MCCB/ MCBs mounted therein including making connections/ interconnections, earthing, painting etc. as required.The panel shall have canopy arrangement on the top.All MCB to be C curve .
-
-
-
... More
Feeder Pillar - X
-
-
-
... More
Incoming
-
-
-
... More
The incoming shall comprise the following :-
-
-
-
... More
1 No 80 A FP MCCB, 16 KA service breaking capacity with heavy duty solid neutral link alongwith Earth fault relay and CBCT.
-
-
-
... More
Metering for incoming:
-
-
-
... More
Digital Multifunction meter (MFM-4) with RS-485 communication port for measurement of PF, V, A & Hz , equivalent to EM6459, with CT as required.
-
-
-
... More
Phase indicating lamps RYB with 2 Amps SP MCB back up.
-
-
-
... More
Bus Bars
-
-
-
... More
100 Amps TPN Aluminium Bus Bars of suitable length Bus bars shall be colour coded and insulated by heat shrinkable sleaves & clip on shrouds for joints. The current density of Bus bar shall be 1.2 sq.mm./amp.
-
-
-
... More
Outgoing (All MCB shall be suitable for motor duty & with heavy duty detachable solid neutral link ):
-
-
-
... More
4 nos 40A 4P MCB 10 KA breaking capacity controlled by and including providing 40 4P MCCB, 40 A 4P contactor and Timer.
-
-
-
... More
8 nos 25A DP MCB 10 KA breaking capacity controlled by and including providing 25 DP MCCB, 25 A DP contactor and Timer.
-
-
-
... More
Feeder Pillar - X described as above and all as per specification.
1
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
-
-
... More
Supply and fixing in position the following G.I. tape/wires including providing all fixing accessories and effecting proper connections.
-
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
40
-
-
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
240
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements