Rural Development And Panchayati Raj Department Tender

Providing and laying in position cement concrete ofspecified grade including the cost of centering and Shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)Crushed,including all carraige from available source to site of work complete

Filling earth/stone in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m

Dumping stone filling including cost of stone in horizontal on level

Providing and fixing up to floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including cost of required cantering, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) including all carraige from available source to site of work complete

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. up to floor five level excluding cost of cantering, shuttering, famishing and reinforcement. 1:2.4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size)including all carraige from available source to site of work complete

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermos-Mechanically Treated barsincluding all carraige from available source to site of work complete

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer- in charge First class kail wood

Structural steel work welded in built up section trusses and framed in trusses purlin rafters post or like components including cutting hoisting fixing in position and applying a priming coat of approved steel primer complete

Providing and fixing colour coated [ rip profile ] GI Sheet roofing .50 mm thick including vertical curved surfaced fixed with polymer coated J or L hooks bolts and nuts diameter with bitumen and GI limpet washers and overlapping of sheets complete in horizontal vertical trusses including cutting to size and shape

Dry random rubble masonry with hard stone in foundation and plinth using nallah stone

20mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand)

Providing / Fixing of Hollow Pipe/ angles for Grilling including Painting Complete Job. (2’6” Height)( Design as per the instruction Site Engineer)

Providing and fixing of ceiling work (a)providing and fixing of fiber glass or calcium silicate acoustical ceiling panel,white colour thickness 15 mm,size 595mm sound absorbent.noise reduction coefficient up to 0.95 density110kg /cum wight 115kg/sqm light reflection 85% along with channels fo the entire ceiling of the auditorium

(b)Gypsum used for cobe and Designing work in ceiling Providing and fixing of (Gypsum board ceiling)all hight ceiling with necessary GI framing as explained under Gypsum ceiling.The tapered and square edge of the board are joined and finished to a flush finish with request jointing compound paper tapes finish and submersible for gypsum plaster boards make with saint gobin and USG Boral Gypsum 12.5mm thick including two ore more coats of plastic emulsion pant to a smooth finish finished surface area Gypsum board ceiling with cover design.work complete in all respect as per the drawing to the satisfaction of engineer-in charge.

Providing and fixing of ordinary glass panes with putty and nails whatever necessary 4.0mm

Providing and applying white cement based putty of average thickness 2 mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Painting with washable Distemper of approved grade and manufacture to give an even shade and colour

Applying preming coat with Ready mixed pink or grey primer on wood work having VOC content less than 150 gm/litre

Painting with synthetic enamel paint of approved brand and manufacture two or more coat to given and even shade and colour on wood work.

Providing and fixing of 1st quality ceramic glazed tile of minimum thick ness 5 mm of approved brand and manufacture of any size as approved by engineer in charge in cement mortar (1 : 3) mix and joined with grey cement slurry @ 3.3Kg/sqm including pointing in white cement with mixed pigment of matching shade complete. Including carriage

Providing and fixing of 1st quality ceramic glazed floor tile of minimum thick ness 5 mm of approved brand and manufacture of any size as approved by engineer in charge and laid on 20 mm thick bed of cement mortar (1:4 ) mix including pointing in white cement with mixed pigment of matching shade complete, including carriage.

Proving and fixing of water closet squatting pan (Indian type WC pan ) with 100mm PVC P trap 10 litre low level PVC flushing cistern including flush pipe ( of approved make) manually controlled device (Push Button) with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Long Pan pattern white vitreous china WC pan of size 580 mm=

Providing and fixing wash basin with CI/MS brackets 15 mm CP Brass pillar taps , 32 mm CP brass waste of standard pattern , including painting of fittings and brackets , cutting and making good the walls wherever required, white vitreous china wash basin size 630x450 mm with a single 15 mm CP brass pillar tap

Proving and fixing soil , waste and vent pipes (a)100 mm dia PVC :-

Proving and fixing soil , waste and vent pipes (b) 75 mm dia PVC:-

Providing and fixing of plain bends of required degree (a) 100 mm Dia PVC :-

Providing and fixing of plain bends of required degree (b)75 mm Dia PVC :- 8 No

Providing and fixing of fixtures ( CP fittings (a) Ball Valve (PVC)

Providing and fixing of fixtures ( CP fittings (b) Angle Valve (Steel) :-

Providing and fixing of fixtures ( CP fittings (c) Bib Cock :-

Providing and fixing of fixtures ( CP fittings (d) PVC Connector :-

Providing and fixing of PPR conforming to IS- 15450 UV stabilized with carbon black having thermal stability for hot and cold water supply , capable to withstand temperature upto 80 degree C including all specials fittings of composed material e.g Elbows / tees , reducers , couplers and connectors etc , this includes the cost of cutting chases and including testing of joints complete as per the direction of Engineer in charge ( concealed work including cutting chases and making good the wall etc) including all required accessories complete jo

Providing and fixing wooden Grooved &f performed Acoustical panels used on auditorium side wall till 8 ft Height as per architectural drawing work will be excavated as per the instruction of Engineer-in-charge including all tool Tackles,Machinery,Manpower,Staging any consumable,Etc Complete.Customized grooved & perforated wooden Medium Density Fibreboard panel to reduce echoes by trapping and diffracting sound in the grooves and perforation found on the surface backing with black fleece to achieve NRS 0.76(noise reduction coeffcient) with 50 mm Rock wool,the sound the passes through the perforation in further absorbed by rock wool which reduce reverberation in the room,smaller grooves are better at attenuating high frequency sound,whereas larger grooves are better at controlling low frequency sounds with required lineal perforation on side wall as per simulated drawings &designs. The panels shell be non FR grade with melamine laminate panels 5440 mmx130mmx18mm with 2.5 mm groove st 14 mm pitch,tongue and groove edges for seamless mounting having density of 400 kg/cum,the panel is fixed by using GI Frame work spaced at 600 mm center @12 mm wooden ply strips frame work spaced at 400mm center with suitable hardware and the system is baseline with 50mm insulation and along with all accessories,continue installing row of panels by inserting screw & plugs in to the groove of the wooden panels and progressively installing the panels in to the the next keel till the actual height is achieved finish off the edges using wooden moulding of matching colour. The work completing in all respect as per the drawing to the satisfaction of engineer-in charge.make;pro-acoustics,amstrong,action tesa,green ¢ury.

Providing & fixing of Wooden Grooved & perforated Acoustical Panels Used On Auditorium Side Walls till 8ft Height • As Per Architectural Drawings, Work Will Be Executed As Per The Instructions Of Engineer-In-Charge (EIC) Including All Tools, Tackles, Machineries, Manpower, Staging, Any Consumables, Etc. Complete. Customized grooved & perforated wooden Medium Density Fiberboard panel to reduce echoes by trapping and diffracting sound in the grooves and perforation found on the surface backing with black fleece. to achieve NRC 0.76 (Noise Reduction Coefficient) with 50mm Rockwool, The sound that passes through the perforation is further absorbed by Rockwool, which reduces reverberation in the room. Smaller grooves are better at attenuating high frequency sounds, whereas larger grooves are better at controlling low frequency sounds with required lineal perforation on side wall as per simulated drawings & designs. The panels shall be Non FR grade with melamine laminate panels 2440mm x130mm x 18mm with 2.5mm groove at 14mm pitch, Tongue and Groove edges for seamless mounting having density of 400kg/m3, The Panel is fixed by using GI Framework spaced at 600mm centers @ 12 mm wooden ply strips framework spaced at 400mm centers with suitable hardware and the system is backline with 50 mm insulation and along with all accessories. Continue installing rows of panels by inserting screw & plugs into the groove of the wooden panel and progressively installing the panel into the next keel till the actual height is achieved. Finish off the edges using wooden molding of matching colour. The paneling work shall be done in all respects as per detailed drawings. The Work complete in all respect as per the drawing to the satisfaction of Engineer in-charge or Project Officer. make: Pro-Acoustics, Armstrong Action Tesa, Green & Century

Providing and Fixing of Stretch Fabric Acoustical Wall System Used On Auditorium Side Walls above 8ft height • As Per Architectural Drawings, Work Will Be Executed As Per The Instructions Of Engineer-In-Charge (EIC) Including All Tools, Tackles, Machineries, Manpower, Staging, Any Consumables, Etc. Complete.Fabric acoustic wall and ceiling treatment system as per architectural drawings to achieve customized design, Stretch fabric panels are designed for acoustic performance and visual enhancements, Panels combines beauty and functionality, creating environments that appeal to all senses. In addition to eliminating unwanted noise and reverberation inside Auditorium above 8ft height: Stretch fabric panels fixed on flexible track profiles secure and frame fabric finish with excellent for sound control applications and is also a beautiful wall covering, enhancing the décor and the sound of installations, almonry panel size can be created in side Auditorium on G.I studs 2400mm X 50mm web flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing 50mm thick Rock wool @48kg density insulation intact with chicken mess wires NRC up to .90. To be mechanically fastened on the G.I Studs. Then 12mm Vinyl tracks are screw fixed on to the 12 mm Ply and Acoustics panel’s .Then the fabric is stretched over the Vinyl tracks. The installed system should provide NRC OF 1.00.Fabric colour as per Architect choice-Ref attached specifications for more details. The system to be installed on G.I studs 600x600mm centre to centre 2400mm X 50mm web thickness 0.5 mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 50mm thick, 1000 GSM Rock wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 for excellent results. Work complete in all respect as per the drawing to the satisfaction of Engineer in-charge or Project Officer

Providing & fixing Acoustical sound reducing Doors • As Per Architectural Drawings, Work Will Be Executed As Per The Instructions Of Engineer-In-Charge (EIC) Including All Tools, Tackles, Machineries, Manpower, Staging, Any Consumables, Etc. Complete. Auditorium Acoustic Wooden doors are extremely high-performance sound reducing door sets. These high quality door sets are available in a wide range of finishes with 3-Point Latching System. They are used wherever high sound reduction performance is required between noise sensitive areas. Leaf of the acoustic wooden door is made up of an acoustic sandwich panel core, hardwood or marine plywood structure with stripping in the recesses and on the bottom, surfaced on both sides with 2.5mm thick high-pressure laminate in the desired veneer over MDF board. The core of the door is made up of a sandwich panel of different materials in order to achieve good sound refraction and therefore good acoustic performance. The door to be fabricated with 12mm thick commercial ply (Green/so near or equivalent make) veneer facing and finished with varnish on both sides. Wooden framework filled with Insulation wool with one layer of 80mm thick. 24.Kg.Cu.M density insulation wool. The insulation should be supported with wooden batten of kail wood framework minimum 610mm x 610mm to avoid sagging. The door leaf will be fabricated using90mm X 70mm thick. Teakwood frame. The fixed door frame (chowkhat) shall be teakwood of size 150mm X 80mm. The door will have a hydraulic door closer, crossbar door handle and relevant hardware for fabrication and fixing. Complete with the requisite door frame and magnetic and rubberized door seals all-around of the door frame or as per specification, drawing, and as per the instructions of Engineer-in-Charge. the door to be attached with the door frame by SS ball bearing hinges with adequate strength and numbers to avoid sagging All joints to be sealed with Dow Corning 790 or equivalent mastic Sealant. The doors on the auditorium side to be finished using non-light reflective media like a carpet of dull laminate /veneer. Work complete in all respect as per the drawing to the satisfaction of Engineer in-charge or Project Officer. Properties: » Custom Manufactured Acoustic Door to Any Size Specification » Doors are supplied complete with their own mounting frames » Adjustable Soundproof Jambs & Seals » Infill Material : Insulation wool » Best Performance Wood Finished Door Assembly Available » Heavy Duty Hinges (4) » 3- Point Latching System » Door is available in standard veneers however other veneers are available on request.

Supply & Installation of Auditorium Tip-Up Chairs As per Physical Samle submitted: Supply and Fixing of Auditorium tip- up Auditorium seating with PU MOULDEDN FOAM IN SEAT & amp; BACK (50+)DENSITY WITH MS POWDER COATED FRAMEOF 16 GAUGE WITH PP ARMS, CENTRE TO CENTRE DISTANCE 21 INCH WITH LAMINATED FABRIC TO BE GROUTED WITH REQUIRED FASTNER (PRICING ARE INCLUSIVE OF FIXING) Integral rigging hardware for simple connection of enclosures and optional array frame

JBL Two-Way Array Loudspeaker System: FEATURES (Right - Left) 12" OR better Two-Way Array Loudspeaker System *Power Rating minimum 800 W / 1600 W / 3200 W *Frequency Range57 Hz - 20 kHz (-10 dB) or better*System Maximum SPL

Suspension Arrangement for FOH Speakes :Speaker Mount & Riging Hardware For Front Speaker: Speaker mounts and rigging hardware are used to ensure the optimal placement of an audio speaker.

MULTICHANNEL POWER AMPLIFICATIONS:4-channel 2500W per channel @2ohm with an unprecedented sonic quality through advance regulated SMPS power supply with Class I power modules for sound reinforcement applications. 1300 W X 4 @ 8, 2100 W X 4 @ 4, 2500W X4 @2Specification :8 stereo 1300w x44 stereo 2100w x42 stereo 2500w x48 Bridge 4200w x44 Bridge 5000w x4Frequency response 20Hz- 20KHz (+0/-1.5dB)THD+N ≤0.05%S/N Rate≥80dBDamping Factor ≥800Input Sensitivity 0.775v / 1v/ 1.4v/38d/32dB/26dBInput impedance (bal/unbal) 20K /10K Voltage Gain 42.3dBOutput circuitry Class.

High Power Dual 18"subwoofer below stage: Specification: Frequency Range ( –10 dB): 32 Hz-250 Hz Frequency Response (± 3 dB): 37 Hz-120 Hz Sensitivity(1W/1m): 99 dB Power Rating: 2000 W/ 4000 W / 8000 W(Continuous/Program/Peak)Rated Maximum SPL: 138 dB SPL Peak Nominal Impedance: 4Input Connectors: Two NL4Operational

MULTICHANNEL POWER AMPLIFICATIONS:SITC of 2 channel class H amplifier with a max output power of 1300W×2@8 ohms with2025W×2 @ 4 ohms frequency response.20Hz -20 kHz , Voltage gain42.7dB Damping coefficient 300and with built in protection such as limiters. Temperature ,DC, Short circuit, peak current limiters, turn on delay etc.

15 in. Two-Way Stage Monitor : Specification: Power Rating Power Rating 800 W / 1600 W / 3200W Frequency Range : 60 Hz - 20 kHz Dimensions (H x W x D) : 629 mm x 432 mm x 324 mm (375 mm stage height) 24.75 in x 17 in x 12.75 in (14.75"

MULTICHANNEL POWER AMPLIFICATIONS:4-channel power amplifier range Featuring the most advanced technologies on audio power amplification developed by Audio Research amplifiers are able to deliver an enormous power density (1600W per channel @ 2 with the highest power model) with an unprecedented sonic quality from a lightweight High efficiency Class I power modules.Specification:8 Stereo 800W x44 Stereo 1400W x42 Stereo 1600W x48 Bridge 2800W x24 Bridge3200W x2Frequency Response 20Hz – 20kHz(+0/-1.5dB)Damping Factor ≥ 800Input Sensitivity 0.775v / 1v / 1.4v / 38dB / 32dB / 26dBOutput circuitry Class I.

SITC of 22-Channel Mixer Console: with large number of inputs and Features High-Performance 22-input small format analogue mixers with onboard effects Iconic Sound craft®Ghost mic preamps with ultra-low noise performance Renowned Sound craft® Sapphire British EQ with sweep able mid-bands per channel Lexicon® Effects Engine featuring award-winning Reverbs, Delays, Choruses and Modulationsdbx® Limiters (High-ratio Compressors) on input channels2- in/2-out USB audio playback and recording*Switchable Hi-Z inputs for guitars, basses and other instruments HI-Pass Filters (low-cut) and 48V Phantom Power on all mic channels Comprehensive Sound craft® GB Series audio routing Smooth premium-quality faders Robust metal construction for tour-grade build quality and reliability Internal universal power supply.

DUAL Wireless Handheld Microphone system in UHF band: Frequency range: 610 - 640 MHzIR synchronism between receiver and micro phones. LCD display with AF, RF,gain and frequency information. Manual adjustment, free frequencies scan and squelch level functions. Balanced and mix unbalanced outputs. RECEIVER -Frequency band - UHF true Diversity Bandwidth - 25 kHz Frequency response - 20 Hz - 20kHzStability - ±0.0005%Sensitivity - 12dBuV (80dB S/N)S/N Ratio 105dB (A)Dynamic range 100dBMax. Audio output -10dBVHANDHELD MICROPHONE -Type Dynamic Polar Pattern - Cardio id RF output power - Lo: 5mW / Hi: 30 spurious emission --60dBMaximum deviation±48kHzS/N Ratio 105dB (A)".

DUAL Channel Wireless Lapel Microphone system in UHF band. Frequency range: 610 - 640 MHzIR synchronism between receiver and microphones.LCD display with AF, RF,gain and frequency information. Manual adjustment, free frequencies scan and squelch level functions. Balanced and mix unbalanced outputs. RECEIVER -Frequency band -UHF true Diversity Bandwidth - 25 kHz Frequency response - 20 Hz - 20kHzStability - ±0.0005%Sensitivity - 12dBuV (80dB S/N)S/N Ratio 105dB (A)Dynamic range 100dBMax. Audio output -10dBVBadypack Transmitter - Type - Condenser Polar Pattern - Cardioid output power - Lo: 5mW / Hi: 30 spurious emission --60 dB Maximum deviation ±48kHzS/N Ratio 105dB (A).

Cordless handheld microphone; System: AFS single channel Diversity. Frequency Band: UHF.Number of channels: 99 selectable channels. Dynamic Range: 95 db. Output Level: 400 mV (Balanced), 400 mV (unbalanced).S / N: 95 dB.De- Emphasis: 50 us. Power supply: 15-17V DC (External power supply included). Transmission power: 30mW. Modulation Type: FM. Deviation: 40 kHz. Spurious Emissions: 60 dB.

Instrument microphone. Element Back electret condenser Frequency response 50 Hz ? 18 kHz Polar pattern Unidirectional (Cardioid)Sensitivity -42 +/- 3 dB (1V@1kHz)Max SPL - 140dB Dynamic range - 112 dB Power supply 48 V DC phantom Switches - Flat response high pass filter / -10 dB/ 0 dB.

Handheld wired microphone Elements: Dynamic moving-coil. Polar pattern: Unidirectional. Sensitivity: -52 dB +/- 3 dB (o dB= 1V/Pa at 1 kHz).Frequency response: 50 Hz~14 kHz. Output Impedance: 600±30%.

Gooseneck microphone with LED Ring. Electret condenser. Polar pattern: Unidirectional + Cardioid. Frequency response: 50Hz~16kHz.Sensitivity: -54 dB ±3dB/Pa.Output impedance: 200ohm±30%.Max S.P.L: 138 dB.S/N Ratio: 65 db. Dynamic range:

Low profile Boundary Layer typ Microphone,*Half-Cardioid Polar Pattern.* The Microphone is supplied with a separate in-line Phantom Power Adaptor accepting 9 to 48 volts DC,* Switchable 10 dB pad and bass cut filter (-4dB per octave at 400 Hz to–6dB per octave at 100 Hz);* Impedance 200 Ohms; Frequency response 50 Hz to 18 KHz;* Sensitivity-37.0dB +/- 3dB @ 1Khz (0db =1V/Pa);* The Microphone's base is covered with a rubber isolation pad to help minimise the transfer of mechanical noise and vibrations from tables/floor.

Ultra-Light Boom Stand : Microphone boom stand combines the crucial elements of lightweight durability with an attractive and functional design. This collapsible tripod boom stand has a sturdy die- cast and steel construction that offers superior resiliency with great flexibility of positioning, so it's always convenient and never conspicuous. Its glossy black finish ensures an elegant yet unobtrusive presence and its lightweight design enables maximum portability. Perfect for on-the-go musicians, performance venues or studios, the BL3 provides the strength you need with the portability Complete

Mini Boom Stand :The ideal low profile boom stand for making drums, speakers and anything close to the floor.Features:Perfect for making kick drums and speaker cabinets Heavy-duty adjustable boom mic stand Die-cast and steel construction Mic clip included

Professional Stereo Headphones: headphone designed for monitoring applications in studios, high end PA, Auditoriums and by DJs. It is also ideally suited for very high fidelity music enjoyment. The headphone features outstanding performance and many useful features for convenient and comfortable use. Distinct & exquisite sound quality with excellent bass reproduction & clear high frequencies. Folding design with rotatable ear cups. Provided with soft skin ear pads for high ambient noise reduction. Item Type: Headphones Vocalism Principle: Dynamic Speaker: 50 mm / 1.97 inch Impedance: 32 Sensitivity: 110 dB ± 3 dB Frequency Response: 20 Hz – 20000 Hz Package Includes: 1 x PcLong term wearing comfort, folding design

SITC 6 Pint or more Audio Signal Pop-Up Floor Boxes: Pop-up Floor Box with flip cover

Snake Cable Long drum:LOSEN/SUNRISE 16 Pair Bulk CL-2 Multi-pair Snake Cable Each channel is 24 gauge, individually shielded, jacketed and numbered. Meets NEC Code for permanent installation. Cables are built with the hard- working, hard-touring musician or audio professional in mind. AWI cables are exceedingly high-quality cable lines in the fix installations and live shows for their durability and excellent performance

Speaker Cable for 2.5 Sq. mm 200/40 Subwoofers: Cable with thickness of 2 Core 2.5 Sqmm.Use for all audio applications with Double Diamond Protection Highest quality stranded copper wire for maximum flexibility and covered with a tough PVC jacket to help prevent chafing, Wire should be designed to maximize sound quality and for better frequency response Cable with thickness of 2 Core 2.5 Sq. mm.

Speaker Cable for 1.5 Sq. mm 100/40 Main Speakers :Cable with thickness of 2 Core 1.5 Sqmm.Use for all audio applications with Double Diamond Protection Highest quality stranded copper wire for maximum flexibility and covered with a tough PVC jacket to help prevent chafing, Wire should be designed to maximize sound quality and for better frequency response Cable with thickness of 2 Core 1.5 Sq. Mm

Microphone Cable :balanced shielded Roll Reel of microphone audio cable, Balanced and shielded with rope braiding to give cable substantial strength while retaining extreme flexibility & Great for building custom length mic cables, custom patch coded or other audio applications that require either a stereo or balanced signal

Modular wired fixed HEAVY-DUTY STAGE RIGGING LIGHTS QUIK AND EASY WITH POWER OULETS BUILT IN TO THE BAR FOR LIGHTNING APPLICCATIONS; Over Head light Bar Fabricated with Steel rectangular Tube 4”x4”x16 Gauge dia of full length interlocking with 2”squre pipe linked with 2 inch round pipe for trussing with adequate clamps, bars can be linked together side by side bar, with hang from wire roof, chain or hung from an existing grid this lighting bar painted in side,outside within chromate primer finally coated with black quick drying enamel paint to mounting to stage lighting which suspended from bar above the stage to focus /wash the stage .Make camera/stage work/illumitex/Effector and Lecka.

Truss FOH “FRONT OF HOUSE” LIGHT BAR40 NB dia pipe of full length trussing with adequate clamps, this lighting bar painted in side, outside with zin chromatic primer finally coated with black Quick, drying enamel paint required witch is suspend from calling in to front section to focus stage.36ft Length Make Camera/Stage work/Illuminati/Effector on & Laksa

Side ladder; Providing and fixing of the side ladder made out of 50x25MS Tube pipe size 4x2 ft. Make;Canra/Stage Works

LED 200W COB Surface light (optional color)GL-LPC200Voltage-110-240V 50/60HZpower’200W COB template colour tempter :-3200K-6500Kstrobe:High speed electronically adjusted strobe up to 1-25 time/sec or random strobe Dimming; the total dimming channel can simultaneously control the light and dark changes and close light of 2 main colour Applicable life 50000-1000000 hours net weight 5.15 kg make camara/stage work /illumitex /Effectron & leksa

54x3W PGBW LED PAR BAR LIGHT Voltage AC100-240 v 50 /60Hz Power;-60w LED source;3W Tain Xin(R14,G14,B14,W12)light life-50000h DMChannal;8CHModal;DMx512/sound/Auto/master-salve size 295x22x29 cm wight;34 kg.MakeCanra/stage work/illumitex/Effectron & Leksa.

GENERAL ELECTRICAL:WORK:-Along with primary secondary points;-Insulation of general lighting as required celling area Astrea prime 90 to 10 watt Recessed LED Panels Celling light (warm white, Round) 160 pices on gypsum board 2Watt LED MODULE LED FOOTLIGHT-40 pieces MAKE:Philips,osram;wipro

DMX/Scene Controller:24 control channels memorisable programs via 4 page 12 scenes can be called directly via the faders black out function sound control via built -in microphone or via line in put controller comes with out pre-programmed chasers

LIGHT CONTROLLER (DMX)SPLITER 8S;DMX splitter is a DMX 512 distribution amplifier it is specially designed for connection of DMX receiver (Dimmers,color,changers ,move lights Etc)in a star configuration. DMX splitter can surmount the restriction that single RS 40085 can only connected 32 connect 32 sets of equipment the multiple out put optically isolated DMX 512 distribution amplifier have be come necessary in many DMX 512 system.DMX Splitter provide totall electrical ground isolations between different branches of the stars. This grealy decreases problem with ground loops.

Supply, instillation, testing and commissioning of wiring for directs points. Using PVS insulated finolex 1.5 sqm 3 corr FRLS Cu.Cond cable for two sockets/box,30 no core FRLS Cu-cond.cable for 2 sockets/box.strating from the supplied MCB box/panel, having 10ASP MCBs ,to the lighting bars /tree or stage points terminated at junction box with 2xSHUCKO 16AMP.sockets/per point(All points to be market an numbered)

Providing and fixing Angle Iron sing board (4-'0"x3'-0" including priming and painting photograph complete job.