Rural Development And Panchayati Raj Department Tender

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30 mm thick

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) 30 mm thick shutters

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.99.1 One or more coats on old work

providing and fixing 4" thick T&G wall panelling with 12mm thick plywood including polishing complete job.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :

Providing and laying of local good earth in frames of wooden flooring including carriage complete jobs.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimetre channels 0.5 mm thick 27 mm high having flanges of 20 mmand30mmlong,theperimetre of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimetre channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks).

CARRIAGE OF CEMENT AVG LEAD 150KM

CARRIAGE OF SAND 20KM

Wiring for light point , fan/ exhaust/call bell point/ amp socket point with 15 mm FR/PVC insulated copper cable in existing /recessed PVC conduit but without control switch, without box as required.

Supplying and fixing 0f 1 inch, ¾ inch pvc conduit capping along the accessories in surface / recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 10 amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch ms box

Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutters and 20amp 240 volt single pole mounted in recessed including m.s box complete as required

Supply and fixing single pole and neutral sheet steel mcb distribution box 240 volt on surface recess complete with tinned bus bar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including points etc. as required 12 way double door spn

Supplying and fixing of the following light fixture including all accessories like electronic ballasts comes etc. complete as required concealed / tube lightning LED luminaries as per Philips.

Supply of 11000 volt grade aluminium conductor KPLE insulated PVC sheath arramged complete as per specification as required 25 mm 3 core

8 modular plate

6 modular plate

4 modular plate

Supply and fixing of MCB of following poles in the existing MCB DB complete with connections testing and commission etc, as required Single p[ole 6/10/20 Amp

Supply and fixing of MCB of following poles in the existing MCB DB complete with connections testing and commission etc, as required. Double pole 63 amp

wirring for change over 63amp and installation with complete accessories and hole on the wall as requried.