Rural Development And Panchayati Raj Department Tender

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C work including straightening cutting, bending, placing position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped Hot finished welded type tubes

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Columns, pillars, piers, abutments, posts and struts.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs, landings, balconies and access platforms

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws..

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and Fixing ornamental shingstak over door and window all complete job.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate.

6mm cement plaster to ceiling of mix 1 : 3 (1 cement:3 fine sand)

French spirit polishing, Two or more coats on new works including a coat of wood filler

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing wall with water proofing cement paints required shade. New work 2 or more coats applied @ 3.84kgs /10sqm.

Providing and fixing panelling on wall 4" thick with 12mm thick ply on wall for support.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position. Budloo / Fir wood

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed withh pigment of matching shade complete

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.0, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement: 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) Pn-16 pipe, 25mm 00

Pn-16 pipe, 32mm 00

Providing and fixing PVC water waste pipe of required dia. Including bends, Tee door bends , L bends trap joined with addisivematerial Isl marked like prince, vector or Equivalent brands complete job 100mm dia bore

Providing and fixing PVC water waste pipe of required dia. Including bends, Tee door bends , L bends trap joined with addisivematerial Isl marked like prince, vector or Equivalent brands complete job 75mm dia bore

Providing and fixing ball valve (ppr)of approved quality complete20 mm nominal bore

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15 mm nominal bore

Providing and fixing brass bib cock of approved quality. 20 mm nominal bore

Traditional Ornamental painting , complete all job.

Providing and fixing ISI mark oxide M.S sliding door bolt with nut and screws etc complete 250x16 mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. Size 100x10 mm

Size 150X 10mm

Providing and fixing bright finished brass handles with screws etc. complete : 75mm

Size 125 mm

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 11.20.1 Light shade pigment using white cement

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimetre channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimetre of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimetre channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks).

Providing and placing on terrace (at all floor levels) p olyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Supply and fixing of following sizes of PVC conduit alongwith accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required.

CEMENT & STEEL An avg lead of 200km

SAND An avg lead of 30km

STONE AGGT. An avg lead of 20km

STONE An avg lead of 20km

Wiring for light point , fan/ exhaust/call bell point/ amp socket point with 1.5 mm FR/PVC insulated copper cable in existing /recessed PVC conduit but without control switch, without box as required.

Wiring for heating point for 20 amp socket point & switch point with 2.5 sq mm FR/PVC insulated copper cable in existing /recessed PVC conduit but without control switch, without box as required.

Supplying and fixing of 10 amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch ms box complete as required including connection.

Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutters and 20amp switch 240 volt single pole mounted in recessed including m.s box complete as required.

Supply and fixing TPN sheet steel mcb distribution box 240 volt on surface recess complete with tinned bus bar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including points etc. as required double door TPN DB 8 Way

S/F of LED base light 36watt 2'X2' LED Panel light.

Supplying and fixing of the following light fixture including all accessories like LED conceal light of 12 watt . complete as required concealed as per Philips, havells, Panasonic.

Supply of 11000 volt grade aluminium conductor KPLE insulated PVC sheath arramged complete as per specification as required 25 sqmm 3.5 core

Supply of 11000 volt grade copper conductor FR/PVC insulated Copper Cable Of 10sqmm.

12 modular plate

6 modular plate

3 modular plate

Supply and fixing of MCB of following poles in the existing MCB DB complete with connections testing and commission etc, as required Single pole 6/10/16Amp

Supply and fixing of MCB of following poles in the existing MCB TPN complete with connections testing and commission etc, as required 4 pole TPN 63Amp

Supply and fixing of Change Over switch gear 4 pole of 63Amp.(Havells or equivalent)

Supply and fixing of Heavy duty exhaust fan includind wiring etc. (300mm)of Havells/ crompton or equivalent.

Supply and fixing of Heavy duty exhaust fan includind wiring etc. (150mm)of Havells/ crompton or equivalent.

Supply and fixing of LED street light of 50 watt incl. clamp bracket etc All complete Job. Havells/ crompton or equivalent.