Rural Development And Panchayati Raj Department Tender

Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Random rubble masonry with hard stone in foundation and plinth includinglevelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying 40mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge and also carriage of tiles and complete job

Supplying at site angle iron posts and struts pf required size including bottom to be split and bent at right angle in opposite direction for 10mm dia etc. complete

Providing and fixing chain link fencing of required width in mesh size of 4" x 4" made of GI wire dia 2.5mm including strengthening with 0.16mm dia etc complete.

Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)

Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn freee from weeds and fit for mowing including supplying of good earth if needed ( the good earth shall be paid seperately.) with grass turf

Supply and installation of solar light of approved and certification by MNRE(GOI) for Kharu Block, District, with following conditions: 1) PV module- 75 wp under STC 2) Battery- Minimum 12V, 30 AH capacity lithium iron phosphate (Life PO4). 3) Light source- White light emitting Diode (W-LED). 30-Watt, W-LED luminaire, dispersed beam, soothing to eyes with the use of porper optics and diffuser. LED chip should be commpliance to IES: LM-80 (Approved method of measusring Lumen depreciation time to L70). Test repost for the same shoudl be submitted. 4) Light Output- TheLuminaire mustuse high efficacy W-LED with minimum 150 lumens per watt (and UV free). [ A certificate to ve submitted by the sustem supplier to the test lab during certification.] For single light level -minimum 15 lux shen measured at a point 4 meters below the light. The illumination should be uniform without dark bands or abrupt variations and soothing to eye. Higher light output will vwe preferred. For multiple light levels- The lumiaire should have two levels of light to take care of different lightning needs during the night. Minimum 15 lux when measured at a point4 meters below the light(at "high illumination should be uniform without dark bads or abrupt variations. Minimum 5 Lux at lower illumination levels. (Higher light output will bew preferred). The luminaire shall be tested for Electrical.

Providing of side sitting chair wating by rectangular Tubular and complete Job 80Kg/Chair

Carriage of cement from a average lead upto 220 by Mechanical Transport

Carriage of sand and aggregate from an average 15 Km by mechanical Transport

Carriage of stone from an average lead upto 15 km by MT