Rural Development And Panchayat Raj Department Tender
... More
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
The bid capacity required in the given tender can be calculated using the following formulas: For Road work: - 33% of advertised cost for the work valuing up to 40.00 Cr
- 40% of advertised cost for the work valuing more than 40.00 Cr For Bridge work: - 33% of Advertised Cost For Road & Bridge: - Should have either executed under separate contracts both Road & Bridge work up to the aggregate value of 33% of the total advertised cost for works valuing up to 40.00 Cr and 40% for the works with advertised cost beyond 40.00 Cr
- OR Should have executed both road and bridge work under one single contract at least 33% of the advertised cost of work Available Bid capacity = (A x N x M - B) Where:
A = Maximum value of civil engineering works executed in any one year during the last five years (updated to the current price level of the year indicated in appendix to ITB)
N = Number of years prescribed for completion of the works for which bids are invited
M = 2.5
B = Value (updated to the current price level of the year indicated in appendix) of existing commencements and ongoing works to be completed during the next 03 years (period of completion of the works for which bids are invited)
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed or substantially completed similar nature of contract(s)/work(s) of a certain value during the last five years. The specific requirements are as follows: - Road work: - 33% of advertised cost for the work valuing up to 40.00 Cr - 40% of advertised cost for the work valuing more than 40.00 Cr - Bridge work: 33% of Advertised Cost - Road & Bridge: - Should have either executed under separate contracts both Road & Bridge work up to the aggregate value of 33% of the total advertised cost for works valuing up to 40.00 Cr and 40% for the works with advertised cost beyond 40.00 Cr - Or should have executed both road and bridge work under one single contract at least 33% of the advertised cost of work - Building: - Initially mentioned as 40% of Advertised Cost for qualification and 25% of Advertised Cost for similar nature of work - Later mentioned as 25% and 30% of Advertised Cost - Finally mentioned as 33% of Advertised Cost - Other works: - Initially mentioned as 40% of Advertised Cost for qualification and 25% of Advertised Cost for similar nature of work - Later mentioned as 25% of Advertised Cost - Finally mentioned as 25% of Advertised Cost Additionally, any State/Centrally Sponsored Project having been successfully completed in time during the last five years shall be given an enhancement factor of 5% per year from the date of completion of work during the last five years. The bidder should also furnish the certificate of experience and tax deducted at source (TDS) certificate against the same work in evidence of the Experience & value of (similar) works claimed. The weightage towards experience of the project would be given to each joint venture partner in proportion to their participation in the joint venture.
Costs
EMD
₹ 7,27,140Document Cost
₹ 4,500Tender Fee
Refer Documents
Summary
Construction Of Community Library And Guest Room At Ulma Community Chuchot Yokma (under District Capex)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_RDD_15754_1Tender No
121-UTL REWL OF 2024-25Tender Authority
Rural Development And Panchayat Raj Department ViewPurchaser Address
-Website
http://tenders.ladakh.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
C) 4050 (50 mm OD) pipe
50
1021
51062
... More
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilised with carbon black having thermal stability for hot & cold water supply, capable to with stand temperature up to 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required ) e.g. elbows , tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work including cutting chases and making good the wall etc. A) 1216 (16 mm OD) pipe
190
526
100102
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
3950.76
122
482866
... More
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.
26
11727
304912
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively
26
1426
37080
... More
Supplying and fixing C.I. cover without frame for manholes 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23.
27
1717
46366
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like
1
73800
73800
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
26
727
18917
... More
Carriage of Steel by MT including loading unloading and stacking all complete job:
1.25
445
557
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end):18.19.1 25 mm nominal bore Horizontal
52
612
31858
... More
Providing and fixing of pipe with heat wire 25 x 13 mm nitrile insulation pipe, rock wool, GI- Insulation mesh, black polythene and aluminium sheet for covering including all fixtures, adhesive, claps etc and cost of material and labour complete job as per direction of ENGINEER IN CHARGE
650
2870
1865500
... More
Carriage of Stone avy. Lead of 15 Km by MT
474.93
373
177414
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessar screws etc. complete : 250x10 mm
214
388
83102
... More
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85gms.
52
223
11621
... More
Providing and fixing toilet paper holder : vitreous china
26
711
18487
... More
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colours weighing not less than 105 gms
26
275
7170
... More
B.) 75mm dia Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
40
434
17390
... More
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)
2764.62
347
961929
... More
Providing and laying traditional ornamental shingstak including polishing all complete job.
230
2624
603520
... More
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
26
345
8983
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm
13.01
834
10863
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc.complete : 125 mm
107
44
4755
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.complete.
107
151
16203
... More
P/L of ready made flooring 8" wide (Action Tesa AC4) complete job.
12768
139
1779859
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
60120.37
105
6360026
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting fixing in position and applying a priming coat of approved steel primer applying structural steel etc. as stipulated.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
534.18
174
93164
... More
D) 2532 (32 mm OD) pipe
30
812
24380
... More
Demolishing brickwork manually/by mechanical means including stacking of serviceable materia and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
82.07
1368
112302
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to beMspecified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size 11.41A.2.1 Size of Tile 600 x 600 mm
72.46
1357
98335
... More
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete
26
860
22369
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers
924.36
582
538435
... More
C) 2025 (25 mm OD) pipe
80
698
55867
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450mm dia
26
1349
35095
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with wer and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3000
11
33185
... More
Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40gms.
26
112
2930
... More
Providing and fixing PTMT pillar cock of approved quality and colour . 15mm nominal bore, 107mm long, weighing not less than 110 grams
26
283
7364
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
2103.91
166
350407
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.
163.04
744
121317
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc.
100
695
69510
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed
93.94
6392
600469
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge.Second kail wood 35mm thick for WINDOWS
79.57
2930
233174
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead
520.24
36
19018
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood
7.28
98524
717257
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
47.38
593
28139
... More
Providing and fixing of insulation for water storage tank. with 25mm nitrile sheet, rock wool, GI- Insulation mesh, black polythen and aluminium sheet for covering including all fixtures, adhesive, claps etc and cost of material and labour complete job as per direction of engineer in-incharge.
3000
28
86100
... More
Centering and shuttering for Edge of slab
113.02
257
29142
... More
Carriage of sand and C. aggregate avy. Lead of 15 Km by MT
1715.24
317
544596
... More
Cement concrete flooring1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate
593.07
560
332179
... More
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
32.01
122
3928
... More
Providing and fixing PTMT grating of approved quality and colour. 18.58.1 Circular type 18.58.1.1 100 mm nominal dia.
26
49
1281
... More
B) 1620 (20 mm OD) pipe
130
555
72207
... More
B) 75mm dia PVC
300
676
203073
... More
B) 3240 (40 mm OD) pipe
80
851
68111
... More
Providing and fixing soil waste and vent pipes A) 100mm dia PVC.
300
763
228989
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m
542
162
88221
... More
Providing and laying of 4" wide T&G Panelling with 12 mm thick ply wood in geometrical design including french spirit polish complete job.
49.42
3034
149940
... More
Random rubble masonry with hard stone laid dry in foundation, plinth & walls Laid without bond stone
17.32
3880
67218
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250mm. 510x1040 mm bowl depth 250mm.
2
5967
11936
... More
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
391.11
470
183995
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
432.81
10742
4649505
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
300
164
49200
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Second kail wood 35mm thick for door
128.43
2930
376355
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100mm dia. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
40
546
21870
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.
26
102
2675
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding Flat iron (15mm×3mm) @ 4" c/c spacing.
1250.58
181
226528
... More
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
1186.15
181
215440
... More
Carriage of cement & steel avg. Lead of 15 Km by MT
461.95
282
130394
... More
Dismantling woodwork inframes, trusses,purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead Of sectional area below 40 square centimetres
140
13
1911
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
39.24
2361
92673
... More
Providing and fixing of dry stone soling in horizontal layer including cost of Stone complete job.
93.67
922
86378
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia
26
6527
169714
... More
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) nallah stone.
363.94
5544
2017947
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms
26
238
6196
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter
79.57
48
3882
... More
Earthwork in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by Engineer-in-charge. 2.7.1 All kinds of soil
452.12
201
91179
... More
Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm
107
303
32507
... More
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceilingtiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1971 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams persqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross- Tof size 15x32 mmof length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steelitems (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mmdia fully threaded hanger rod upto 1000 mm length and Lshape level adjuster of size 85x25x2 mmGalvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mmto befixed on peripherywall / partition with the help of plastic rawl plugs at 450 mmcenter to center and 40 mm long dry wallwood screws. The work shall be carried out as per specifications, drawing and as per directions of theEngineer-in Charge. With semi perforated 12 mm thick micro tegular
1186.15
1874
2223744
... More
Providing and fixing white vitreous china wash basin includingmaking all connections but excluding the cost of fittings: Flat back wash basin of size 550x400mm.
26
860
22381
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts andscrews etc. complete : 300x16 mm
107
230
24632
... More
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilised with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80° C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required ) e.g. elbows ,tees ,reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. Internal work - Exposed on wall A) 2532 (32 mm OD) pipe
120
583
69969
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings)
60
477
28634
... More
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost ofrequired centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size
514.61
9384
4829521
... More
Providing and fixing of plain bends of required degree. A) 100mm dia PVC. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
40
338
13541
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement
367.14
1242
456092
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms
1260.47
714
900873
... More
Providing and applying white cement based putty of average thickness 2mm of approved brand and manufacture, over the plastered surface even and smooth complete.
3950.76
138
545682
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.
26
3390
88142
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore
100
733
73395
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :
517.14
269
139154
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements