Rural Development And Panchayat Raj Department Tender
... More
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Technical
Technical
Additional Eligibility
Bid Capacity
... View More
Available Bid capacity = (AxNxM-B)
Technical Capacity
... View More
The required prior work experience for the bidder varies based on the category of work. The bidder should have successfully completed or substantially completed similar nature of contracts/works in the last five years. The required experience is as follows: * Road work: - 33% of advertised cost for works valuing up to 40.00 Cr - 40% of advertised cost for works valuing more than 40.00 Cr
* Bridge work: 33% of Advertised Cost
* Road & Bridge: - Should have either executed under separate contracts both Road & Bridge work up to the aggregate value of 33% of the total advertised cost for works valuing up to 40.00 Cr and 40% for the works with advertised cost beyond 40.00 Cr - OR Should have executed both road and bridge work under one single contract at least 33% of the advertised cost of work
* Building: 25% of Advertised Cost
* Other works: 25% of Advertised Cost The value and percentage of similar works completed are mentioned as follows: * For substantially completed works, the gross value of work done up to the last date of submission should be 100% of the original contract price.
* The bidder should have completed works of similar nature, with a value of at least 33% of the advertised cost for road work and 33% of the advertised cost for bridge work. No specific amount of similar works completed is mentioned, but rather a percentage of the advertised cost.
Costs
EMD
₹ 4,50,000Document Cost
₹ 3,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_RDD_15861_1Tender No
131-UTL REWL OF 2024-25Tender Authority
Rural Development And Panchayat Raj Department ViewPurchaser Address
-Website
http://tenders.ladakh.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
41.84
7795
326150
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate
331.66
683
226540
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)
160.09
6761
1082506
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level ::1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
67.06
11277
756280
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
22.17
13100
290443
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
89.19
13630
1215745
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
Q.V.I(6+7+8) @ 120kgs/cum
21410.87
129
2762216
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.
126.35
361
45645
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
248.14
710
176269
... More
Columns, pillars, piers, abutments, posts and struts.
240.8
907
218509
... More
Suspended floors, roofs, landings, balconies and access platforms.
392.14
871
341789
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
78.66
314
24735
... More
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)
157.8
11444
1806005
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class Kail wood
7.2
120151
865091
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
Second class Kail wood
89.42
5098
455921
... More
Providng & fixing of Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., with wooden fillets wherever required complete
76.09
2879
219113
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)Second class teak wood 30 mm thick shutters
25.43
5183
131809
... More
Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with;Budloo wood
38.04
16712
635734
... More
15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)
959.48
424
407127
... More
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) sqm
331.66
304
100921
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Q.V.I (17B+18)
758.52
282
214388
... More
Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
Q.V.I (17A)
532.62
312
166273
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer
Q.V.I (19)
758.52
185
140850
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
378.6
242
91988
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including Hot finished welded type tubes
Taking 3.00kg per sheet area = 3.00kgs/sft x Q.V.I (24) including Steel rack inn store, Stair railing, Water Storage tank stang, Window grill etc
10710
203
2175308
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
331.66
2139
709663
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diametre with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m3
404.12
1287
520163
... More
Providing & fixing 12mm thick ready made wooden flooring incl 1mm thick thermocol incl placeing in position complete job.(AC-4).
5500
220
1210000
... More
Providing and fixing 12mm thick ply board with 4" width plank tongued and grooved, incl. placing in position complete job.
269.79
3700
998223
... More
Providing & Fixing Fan Box
20
150
3000
... More
Providing & Fixing Conceal Box
120
80
9600
... More
Wiring for light point 6amp socket/exhaust fan point / call bell point /with 1.5 Sq.mm PVC FR insulated copper conductor single core in surface/recessed medium class PVC conduit, suitable size MS box and earthing the point with 0.75 Sq.mm. FR PVC insulated copper conductor single core cable as required.
300
975
292500
... More
Wiring for 16amp socket outlet with 2.5mm FR PVC insulated copper conductor cable in existing recessed PVC conduit , including sheet as required.
50
1290
64500
... More
Supplying and fixing of 25mm PVC conduit capping along with accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required.
2000
100
200000
... More
Supply and fixing of a 10amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch M.S box complete as required including connection.
50
330
16500
... More
Supply and fixing of combined 3 pin 240 volt 10amp socket outlet with safety shutter and 10amp 240 volt single pole mounted in recessed including M.S box complete as required
50
1100
55000
... More
Supply and fixing of combined 3 pin 240 volt 10amp socket outlet with safety shutter and 20amp 240 volt single pole mounted in recessed including M.S box complete as required
50
1297
64850
... More
Supply and fixing of following single pole and neutral sheet steel MCB distribution board 240 volt on surface recess complete with tinned busbar neutral link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 16 way double door SPN.
2
4500
9000
... More
Supply and fixing of the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed/Tube lightning 20 watt 3000k, round LED Luminaries as per Philips
120
1600
192000
... More
Supply and fixing of the ceiling light fixtures of 36Watt, 2'-0" x 2'-0" LED Panelbacklit recess tile of Wipro, Crompton or equivalent company incl fitting complete job.
40
3000
120000
... More
Supply and fixing of miniature circuit breaker of following poles in the existing MCB DB completed with connections testing and
commissioning etc, as required. A) Single pole 6/10/20 Amp
16
530
8480
... More
B) Double pole 40 Amp
4
1050
4200
... More
C) Double pole 63 Amp
4
1180
4720
... More
3 modular plate
30
160
4800
... More
6 modular plate
30
260
7800
... More
8 modular plate
30
300
9000
... More
12 modular plate
10
360
3600
... More
Ceiling fan regulator
35
420
14700
... More
Providing & fixing of ceiling fan complete job
35
4500
157500
... More
Providng & fixing of Changeover of required specificatioon comnplete job
2
3000
6000
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
35.67
1514
54039
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
15.61
1382
21588
... More
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.
2
14301
28603
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
1
7512
7513
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357mm
4
1383
5534
... More
Providing and fixing C.P Brass toilet paper holder
3
1282
3847
... More
Providing and fixing of Soap Dish (C.P Brass) with brackets etc
6
285
1713
... More
Providing and fixing brass bib cock of approved quality. 15mm nominal bore.
10
436
4365
... More
Providing and fixing flow trap of PVC .
4
350
1400
... More
Providing and fixing floor jail.
4
150
600
... More
Providing and fixing soil, waste and vent pipes 110mm dia PVC.
30
930
27926
... More
Providing and fixing soil, waste and vent pipes 90mm dia PVC.
30
825
24765
... More
Providing and fixing of PPR pipe complete with PPR fitting and damps including cutting and making good the walls etc internal complete. 25mm
120
380
45600
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and color. 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.
3
758
2275
... More
Providing and fixing of plain bends of required degree.110mm dia PVC.
5
427
2139
... More
Providing and fixing of plain bends of required degree.90mm dia PVC.
5
337
1689
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
10
681
6812
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
5
4134
20671
... More
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble
26.45
2971
78599
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
2000
13
26980
... More
Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction ofEngineer-in-charge (Note: Fittings to be paid separately).
89.3
1750
156350
... More
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing andfixing auto closing hinges shall be paid separately)
3.48
3769
13117
... More
Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing ofracks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction ofEngineer-incharge.
9.29
1272
11826
... More
Providing and fixing sunmica both side including nails & PVC edge Beadings complete job.
Q.V.I(1)
37.16
1500
55740
... More
Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete job
26.68
50
1334
... More
Providing and fixing bright finished brass handles with screws etc. complete: 100 mm
30
277
8338
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical type
30
57
1714
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab over 0.50 sqm
8.83
4366
38553
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
14.12
1514
21392
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
2
930
1861
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250mm.
2
7277
14556
... More
Providing and fixing C.P Brass single lever wall mixer tape of approved quality and make as approved by engineer-in-charge. 15mm nominal bore
2
337
676
... More
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Makrana white second quality
81.31
4085
332154
... More
Extra for pre finished nosing to treads of steps of marble stone.
33.54
643
21598
... More
Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat:With common burnt clay F.P.S. (non modular) brick tiles of class designation 11
33.11
977
32358
... More
Supply and installation of electric convector heater heavy voltage with
two heat output settings 1400 watts x 2 = 2800 watts over heat protection, thermostatically controlled detachable wall mounting bracket, digital LEDdisplay digital room temperature sensor etc with IS! marked or equivalent
15
80000
1200000
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately):For fixed portion.Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
128.46
677
87062
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
33.67
676
22764
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on both sides.
7.06
1232
8704
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . :With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
31.77
1650
52422
... More
Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5mm width
30.49
128
3931
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
151.64
260
39439
... More
CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stackingCement & Steel (avg. lead 5km)
169.51
217
36799
... More
Sand & Stone agg (20mm n/s) (avg. lead 10km)
730.12
265
193818
... More
Soling stone (avg. lead 5km)
200.92
211
42398
... More
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet
111.48
147
16471
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
1000
5
5060
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
20
333
6667
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In mud mortar
39.64
571
22643
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
3.48
2880
10023
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%