Public Works Department Tender
... More
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 27,88,000Document Cost
₹ 14,000Tender Fee
Refer Documents
Summary
Construction Of Multipurpose Indoor Sport Hall Kargil Campus University Of Ladakh.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_15824_1Tender No
E-TENDER 67 Pw(RnB)Division sankoo 2025-26 Dated 21-03-2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment.Along external wall where the apron is not provided using chemical emulsion (Chlorophriphos/ Lindane E.C. 20% with 1% concentration) @ 7.5 litres/sqm of the vertical surface of the sub-structure to a depth of 300 mm including excavation of channel along the wall & rodding etc. complete:
190
-
5510
... More
Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor:
1657.7
-
368009.4
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All Kinds of soil -Pipes, cables etc, not exceeding 80 mm dia.
25
-
9100
... More
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
25
-
9025
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)including all carraige complete.
225.4
-
1179067.4
... More
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing completeincluding all carraige complete.
100
-
35300
... More
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
32
-
1920
... More
Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square meter on damp proof courses after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
100
-
14300
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete-including all carraige complete.
171
-
95760
... More
Centering & shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases of columns etc. for mass concrete.
919.55
-
252876.25
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
290
-
145870
... More
Suspended floors, roofs, landings, balconies and access platforms
17.76
-
9892.32
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
29.6
-
6275.2
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
220
-
96800
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
85565
-
8043110
... More
extra for Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
46772
-
4396568
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
500
-
32000
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level-including all carriages completes .
551.86
-
4863542.18
... More
(b) All works above plinth level upto floor V level-including all carriages completes .
589.94
-
6105879
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately.5.35.2 Providing M-35 grade concrete instead of M-25 grade RMC/RMC.
(Note : Cement content considered in M-35 is @ 350 kg/cum).
1141.8
-
279741
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein.
79.93
-
63624.28
... More
Providing & fixing above plinth upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:6 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal-including all carriages completes . size)Cement Mortar 1:6
621.24
-
6833640
... More
Extra for forming cavity 5 cm to 7.5 cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M.S. ties 300 mm long of 25mmx3 mm section at not less than 3 ties per sqm as per approved design.
148.63
-
28536.96
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :including all carriages completes .
437.15
-
2491755
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels-a)Granite of any colour or shade (Area of slab upto 0.5 sqm)a0. Granite of any colour or shade (area slap upto
0.1
-
455
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels-a)Granite of any colour or shade (Area of slab upto 0.5 sqm)a0. Granite of any colour or shade (area slap over
19.54
-
78882.98
... More
Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc.complete.
29.6
-
13260.8
... More
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
16
-
11904
... More
Providing and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete.12 mm thick
10
-
13760
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately):30mm thick
1168
-
1607168
... More
Providing and fixing cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement: 2 coarse sand) including making the necessary chases in stone and holes in walls wherever required.Gunmetal Cramps 25 x 6 mm - 30 cm long
1168
-
174032
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood
20.9
-
2154727.3
... More
Providing and fixing fiber glass reinforced plastic (FRP) door frames of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminates shall be 2 mm thick and shall be filled with suitable wooden block in all three legs. The frame shall be covered with fiber glass from all sides. MS stay shall be provided at the bottom to steady the frame
44.4
-
31657.2
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws
85.68
-
285914.16
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of doorshutter to be measured).
25
-
13750
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
43
-
4214
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
702.75
-
115953.75
... More
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :second class kail wooq 50 x 20 mm
38
-
57000
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:second class kail wood 50x20mm
20
-
3215
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :250x10 mm
38
-
4598
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300X16 mm
260
-
89960
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
76
-
8740
... More
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Twin rubber stopper
260
-
19240
... More
Providing and fixing aluminum tee channels (heavy duty) with rollers, stop end in pelmets as curtain rods.
39
-
6630
... More
Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge.
105.2
-
69642.4
... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimen ion in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).
34.24
-
359520
... More
Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of Engineer-in-charge complete.
440.65
-
1498210
... More
Supply and fixing ornamental Ladaki SHINGTSAK upto 300mm width over door, window, etc. made by 2nd class silver kail wood or equivalent of size 100x75mm batterns fixing with screws Revit on base wall/ columns/ slab. Including polishing/ varnishing. Design of Shingtsak will be as per drawing issued by consultant/ sample approved by site incharge.
1205.2
-
8918480
... More
Supply and installation of Auralite cubicles as per the approved specifications and measurements.
ITEM DESCRIPTION
Constructed from Century High Pressure Laminate (HPL) compact laminates, manufactured through high pressure and temperature processes in accordance with EN 438- Part 4 standards. The panel's core comprises a specified number of Kraft papers impregnated with thermosetting phenolic resin, while the decorative layer is impregnated with thermosetting Melamine resin. These panels offer exceptional resistance to scratches, abrasions, heat, cigarette burns, chemicals, impacts, graffiti, and moisture, as well as possessing anti-bacterial properties.
DOORS
All doors shall be uniform in colour and constructed from panels. The doors will feature chamfered edges for a sleek finish. Each door will be mounted with SS, securely attached to the pilasters. SS coat hooks and lock sets will be included with every door. Rubber sponge lining will be applied to the vertical ends of all doors for added protection and durability.
PILASTERS
All pilasters will be crafted from 12 mm thick Century HPL compact panels, featuring chamfered edges and equipped with SS thumb turn lock sets. These pilasters will be securely fastened to the floor using adjustable SS legs. SS door stopper profiles with rubber linings will be installed at the vertical ends of the pilasters to dampen noise during door closing. The bottom clearance will measure 100mm.
DIVIDERS
All intermediate partitions or dividers will be constructed from 12 mm thick Century HPL compact laminate panels. These panels will be secured with Aluminium U-channels at their vertical ends to ensure the utmost stability of the system.Total Height: 1953 - 2003 mm, Width: 1000 mm,
18
-
630000
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.a)Hot finished welded type tubes
187610.5
-
27203522.5
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works
300
-
45000
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube
520
-
93600
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
303.58
-
1214320
... More
Extra for pre finished nosing to treads of steps of marble stone
140.1
-
74253
... More
Providing and laying rectified Glazed Ceramic floor tiles of size300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
In colour such as White, Ivory, Grey, Fume Red Brown
401.28
-
556174.08
... More
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of tile 800x800 mm
337.76
-
709296
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.Size of tile 800x800 mm
11
-
22000
... More
Providing and fixing thermal insulation with Resin Bonded Fibre glass
wool conforming to IS: 8183. Density 16 kg/m³, 50 mm thick, wrapped
in 200G Virgin Polythene bags placed over existing galvanum sheet/ false ceiling and held in position by criss-crossing GI wire.
2462.91
-
640356.6
... More
"Supply and Installation of World Federation Approved BWF and International Laboratory Certified Labosports Guangzhou. Synthetic Polypropylene BWF Approved Flooring .Size: 15mt x 7.2mt = 108 Sq. Mt.
Synthetic tile flooring16mm. Thickness supplying of Synthetic tile
flooring for suspended flooring – Imperial grid top deign shall be
high – impact polypropylene, copolymer suspended modules with
907 support leg structure.
High – impact polypropylene, copolymer suspended modules
with 907 support leg structure.
Size – 12” x 12” x 5/7” (30.48cm x 30.48cm x 16 mm)
Weight – 078lbs (350 grm)
Material Test Results
Rockwell Hardness (ASTM D 785 ) : 78 R .
Heat Deflection @ 66 psi (ASTM D 648) : 73 Degree C.
Auto – ignition temperature (ASTM D 1929 ) : 570 Degree C
CLTE (ASTM D 696) : 9.52 mm/mm degree Cx 10-5
Tensile yield strength (ASTM D 638) : 3200 psi
Elongation at Yeild (ASTM D 638) : 6%
Notched izod (ASTM D 256) : 9.5 (FT LBS/IN) at 23 degree C Load
Bearing Capacity : 180 psiSanitary Information
Resistance to fungi (When tested in Compliance with ASTM G -21
and MIL standard
810 – D procedure 508.3) All basic organisms tested (ASTCC
#6205-11797) and were
Found to have zero growth.
Resistance to the following
Bacteria and mildew
Gram – positive bacterial staphylococcus areas
Gram – negative Klebsiella Pneumonia
Pin – staining organism
STV Reticulum
Surface fungi growth prior to and following leaching
Per Sq. Mtr.
Rs. 3,229.00
Approved by BWF (Badminton World Federation) Globally for all
over the world Latest in 2024.
Certified by International Laboratory – Labosports Guangzhou"
1525
-
4575000
... More
Providing & fixing in position Phenol with planks of sizes 14mm thick, 1800mm length (minimum) andbonded Bamboowood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and with planks of sizes 14mm thick, 1800mm length (minimum) and 130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring hall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of
size 1900mm x 44mm, wherever required. The bamboowood planks
shall have minimum density of 1000 Kg/cum & minimum Hardness
1000 Kgf. with Eco friendly UV coating, all complete as per direction
25
-
138750
... More
Providing & fixing in position Phenol bonded Bamboowood in wall
skirting with planks of sizes 14mm thick, 1900mm length (minimum)
and 85mm wide(minimum), in approved colour, texture and finish,
having Performance Appraisal Certificate (PAC) issued by Building
Materials & Technology Promotion Council (BMTPC). The skirting
shall be fixed with SS screws & rawl plugs, over underlayment of
4mm thick, expanded polyethylene foam sheets having 40kg/cum
density over prepared surface. The bamboowood planks shall have
minimum density of 1000Kg/cum & minimum Hardness 1000 Kgf.
with Eco friendly UV coating, all complete as per direction of the
Engineer in-charge
5
-
27000
... More
Providing at all heights, levels and locations Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800, conforming to IS 1254, IS 737, IS 2676. The sheet shall be fixed using self drilling/ self tapping SS screws of size 5.5x65 mm with EPDM seal complete upto required pitch in horizontal, vertical or curved surfaces i/c cutting to size and shape where required as per specifications, detail drawings and direction of Engineer-in-Charge. The rate shall be inclusive of all screws, seal, ridge, labour, scaffolding, machinery for fixing and approved sealent where required etc. but excluding the cost of purlins, rafters and trusses.0.91 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm.
326.44
-
424372
... More
Kansal roof puff insulated panel 40kg/m3 dencity.
Insulated Roof Panels: The roof shall be constructed of 60 +30mm thick PUF insulation & density of 40+ 2 kg/m3laminated with Pre-coated GI outside and inside of Skin. The top sheet shall be0.50mm high ribbed in trapezoidal shape top and bottom sheet shall be .50mm Micro Ribbed Pre-Coated PPGI sheet. The top side of the roof panels shall have 30 mm crest at 250 mm center to center pitch with a flute for capillary action in full length on one side of the crest portion, so as to prevent the water leakages in the event of valley filled with water. The top edge of the panels shall have overlap joinery systems. The bottom edges of the panels shall have tongue and groove systems for a continuous engagement for the full length of the roof panels. The color of the top side sheet will preferably be off White of 18-20 microns Pure Polyester coating over 4-7 microns Primer on the top side and 5 microns of backer coat over the primer on the bottom side of the sheet. Make: JSW & Synergy
Colour – Off WhiteThermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineerin-charge. With Type N-Normal 50 mm thick
2592.1
-
7257880
... More
Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineerin-charge. With Type N-Normal 50 mm thick
2251
-
506475
... More
CIELING
Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws. Budloo/fir wood
845.25
-
1267875
... More
of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on Perimetre wall angle pre-coated steel size (24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws@ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (Spin tone / Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanized steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’ , bottom exposed with 24 mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC
452
-
813600
... More
Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per liter, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in- Charge.1:6 (1 cement : 46 fine sand)
110
-
165000
... More
15mm Cement plaster on the rough side of single or half brickwall of mix:1:6 (1 cement : 46 fine sand) including all carraige complete
2227.14
-
636962.04
... More
18mm Cement plaster in two coats under layer 12mm thick cement plaster 1 : 5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1 : 6 (1 cement : 6 fine sand) including all carraige complete
2227.14
-
734956.2
... More
18mm Cement plaster in two coats under layer
50
-
22150
... More
Finishing walls with acrylic smooth exterior paint of required shade on
New work (Two or more coats applied @ 1.67 liter/10sqm over and
including priming coat of exterior primer applied @ 2.20kg/10sqm
1128.62
-
108347.52
... More
Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
3990.79
-
387106.63
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
1710.55
-
376321
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1mm thick
5119.41
-
783269.73
... More
Providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per National Building Code 2009 complete as per direction of Engineer-in-charge.
1128.62
-
389373.9
... More
Providing and fixing at all height wall panelling with phenolbonded Bamboo Mat board conforming to IS: 13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge.9mm thickness
690
-
3105000
... More
Providing and fixing (CHAR MURABBA) Khutumbandh ceiling of approved design with all contractor's labour, tools and plants, material, lead and lift complete as per specifications and the directions of Engineer-in-charge in line and level including cost of frame work complete. Note 1 - The rate includes cost of material and fixing of wooden frame and wooden rough work (in Budloo wood) as per specifications and as per directions of Engineer-in-charge. 2- The rate also includes cost of material and fixing of Khutumbandh (in first class kail wood) as per specifications and as per instructions of Engineer-in-charge
566.25
-
2265000
... More
Earcons Tip Up Chair Specification : Providing and fixing Tip Up Auditorium chairs with Centre distance ( Arm – rest to Arm rest ) 20” to 22” Back Height from floor 38 ", Seat height from floor 17" & Armrest height from floor will 24" with for Auto-Tip-Torsion spring IS : 4454 – 1981 GRADE 2. Seat back inner frames are made out of MS frame of 25 x 5mm and back is covered by moulded PPCP.Foam is laminated by using 100% Polyester fabric of approved shade .Tip Up mechanism shall consist of weld less one peice system , Side of chairs shall be made out of minimum 16swg CRC sheet pressed together to form a box with minimum 14 swg deep drawn foot rest powdercoated 50 micron . Side and back of the chairs are covered by using same fabric . This is as per company standard & it is to be installed as per direction E-I-C. (Make: Earcons Chairs , Pen Workers, TSI )
200
-
1380000
... More
Sports equipments :- The specification , sizes of the all equipements shall be in accrodnace to norms of sports authority of india and must be in accordance with olympic game charter as well . Portable Badminton Pole -1 Pair
Badminton Nets - 5 Nos
Badminton Rackets 30 Nos
Shuttle Coke 50 Box Table Tennis Board 2 Nos TT BAT 20 Nos TT NET 10 Nos TT NET CLAMP 3 Pairs
TT BALL 50 Packets Portable Volleyball Poles 1 pair
Net 5 Nos
Antenna 2 Pair
Volleyball 2 Nos
Gym Equipments As per available space in drawing. Portable Basket Balls Pole - 4 pairs Basket Balls - 5 nos Seating chairs - 150 nos - Fordable metal chairs with a stadn to stacking in case the cahirs are not in use. Yoga Mats - 100 nos
1
-
615000
... More
c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places
40
-
142000
... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)including all carriages completes .
5.65
-
40284.5
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline
slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of selfhealing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm
37.68
-
16390.8
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
72.15
-
14862.9
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
9.15
-
2067.9
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.
37.37
-
3325.93
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kind of soil depth 30-4.50
30
-
5340
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
2.58
-
14190
... More
Centering & shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases of columns etc. for mass concrete.
11.42
-
3140.5
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
16.97
-
8535.91
... More
Suspended floors, roofs, landings, balconies and access platforms.
163.5
-
91069.5
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above:- Thermo-Mechanically Treated bars of grade Fe-500D or more.
5313.11
-
499432.34
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.including all carriages completes .
53.13
-
468234.69
... More
p/f Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
152
-
24320
... More
p/l 12m cement plaster 1:6 (I cement :6 fine sand )
74
-
21164
... More
neat cement puninng .
74
-
5698
... More
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures as directed by Engineer-in-Charge and consisting of :
i) 1st layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the levelling course (levelling course to be paid separately). Joints sealed and grouted with
cement slurry mixed with water proofing compound.
ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with waterproofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
12
-
22800
... More
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures as directed by Engineer-in-Charge and consisting of :
i) 1st layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the levelling course (levelling course to be paid separately). Joints sealed and grouted with
cement slurry mixed with water proofing compound.
ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with waterproofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd laye
24
-
43200
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
80
-
39920
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
4
-
28000
... More
providing and fixing of soil , waste and vent pipe 100 mm dia
2
-
2240
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. a) All kinds of soil
133.85
-
27573.1
... More
b)Ordinary Rock
20
-
8300
... More
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :All kinds of soil :-( 1.5 to 3m)
7
-
623
... More
Ordinary Rock
10
-
1540
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
190.12
-
42967.12
... More
Supplying and filling in plinth with local sand under floors, including watering, ramming, consolidating and dressing complete.
160
-
140640
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorophriphos/Lindane emulsifiable concentrate of 20%
115
-
22195
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment.Along external wall where the apron is not provided using chemical emulsion (Chlorophriphos/ Lindane E.C. 20% with 1% concentration) @ 7.5 litres/sqm of the vertical surface of the sub-structure to a depth of 300 mm including excavation of channel along the wall & rodding etc. complete:
56.1
-
1626.9
... More
Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor:
56.1
-
12454.2
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)including all carraige complete
162.75
-
895125
... More
Providing and laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
12.6
-
4447.8
... More
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
4.03
-
241.8
... More
Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square meter on damp proof courses after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
12.6
-
1801.8
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete including all carraige complete -including all carriages completes .
51
-
28866
... More
Centering & shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases of columns etc. for mass concrete.including all carraige complete
55.76
-
15334
... More
Suspended floors, roofs, landings, balconies and access platforms.
102.5
-
57092.5
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
90
-
39600
... More
Columns, pillars, piers, abutments, posts and struts.
206.4
-
123014.4
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
13
-
3302
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above:- Thermo-Mechanically Treated bars of grade Fe-500D or more.
2967
-
278898
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
5356.5
-
503511
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
112.2
-
7180.8
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.All works upto plinth level-including all carriages completes .
30.36
-
267562.68
... More
(b) All works above plinth level upto floor V level-including all carriages completes .
41.37
-
428179.5
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)
21.52
-
2474.8
... More
p/F Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)including all carriages completes .
38.26
-
459120
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
37.15
-
58176.9
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)
5
-
4500
... More
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
5
-
825
... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry
5
-
425
... More
Frames and trusses
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):
0.07
-
7216.79
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw(35mm)
7.56
-
24948
... More
Extra for providing and fixing flush doors with decorative veneering instead of non-decorative ISI marked flush door shutters conforming to ISI: 2202 (Part-I)
7.56
-
740.88
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
7.56
-
740.88
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
12
-
1980
... More
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :
3
-
4500
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :250x10 mm
6
-
726
... More
150x10 mm
2
-
190
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300X16 mm
3
-
1038
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
1
-
115
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
4
-
244
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
75
-
11250
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
14
-
47600
... More
Providing and fxing bail bearing for rulling shutter.
4
-
2000
... More
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).
14
-
5908
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
5.54
-
25484
... More
Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :
107.74
-
215480
... More
12 mm cement plaster mix : 1:6 (1 cement : 46 fine sand)
41.96
-
12000.56
... More
Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
99.67
-
9667.99
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick
88.12
-
15861.6
... More
p/l 6MM CEMENT PLASTER
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
11.55
-
3026.1
... More
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
1382.4
-
145152
... More
Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x 60 cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size), every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50 cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and
fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately).
92.16
-
5437.44
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm-
92.16
-
70963.2
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
1800
-
1580400
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).including all carraige complete
54
-
545400
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)For fixed portion-Powder coated aluminum (minimum thickness of powder coated 50 microns)
28.22
-
14110
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)Powder coated aluminum (minimum thickness of powder coated 50 microns)
49.9
-
30439
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
6.24
-
7488
... More
Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5mm width
18.81
-
1692.9
... More
Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations.
a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and
approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645
and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water
proofing compound conforming to IS 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs)
c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge.
112.75
-
140937.5
... More
d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm/sq 3mm deep.
e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineerin-charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm
112.75
-
53443.5
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
9
-
63036
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
12
-
54288
... More
Providing, Fixing,testing and commissioning of 15 mm dia CP brass two way bib cock with flow 6 LPM (Litre per Minute) at 3.1 bar or 45 psi test pressure with C.P. wall flange of approved quality as approved by architect and complete in all respect. (Model no - Drizzle - Brass )
12
-
12000
... More
Providing & fixing S.S. health faucet for ablution with 1.2 meter long PVC tube, hand shower, couplings, wall hook and other accessories of quality and make as approved by architect. Kohler -Cuff
12
-
14400
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
12
-
11400
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
9
-
3420
... More
Providing and fixing toilet paper holder :C.P. brass
12
-
7608
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length- 15 mm nominal bore
24
-
2040
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore
60
-
36000
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia Flexible pipe
12
-
1440
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
12
-
18000
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
6
-
930
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
6
-
4260
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
8
-
8800
... More
C.P. Brass Centre Hole Basin Mixer With Cast Spout
12
-
22800
... More
Receiving, shifting, installing and testing of C.P. brass mixer shower system & spout, wall flange, 190mm long heavy casted shower arm, wall flange and pressure adjustable 8" Rain shower with all type of accessories complete as required. Model no -SKU: C21
8
-
144000
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes
250
-
131500
... More
25 mm nominal dia Pipes
50
-
31400
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes-Internal work - Exposed on wall
30
-
10290
... More
25 mm nominal outer dia Pipes
75
-
31425
... More
32 mm nominal outer dia Pipes
50
-
27900
... More
40 mm nominal outer dia Pipes
100
-
76400
... More
50 mm nominal outer dia Pipes
100
-
105400
... More
Providing and fixing insulation to Pipes with 50mm thick resin bonded preformed mineral wool pipe sections of density not less than 144 kg/cum. as per IS:9842 and applying 26g Aluminium sheet as cladding, properly rolled and grooved with joints sealed with a strap of roofing felt (type-III Grade-I conforming to IS:1322) complete with self tapping screws centre to centre distance of 150mm to close cladding joints. The pipes shall be painted with zinc chromate primer before applying insulation. 20mm nominal bore
280
-
109200
... More
25mm nominal bore
125
-
50250
... More
32mm nominal bore
50
-
23000
... More
40 mm nominal bore.
100
-
51700
... More
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends)32 mm dia, nominal bore
1
-
677
... More
40 mm dia, nominal bore
1
-
772
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore
4
-
2284
... More
25 mm nominal bore
8
-
5296
... More
BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified 50 nominal bore
1
-
4000
... More
40 nominal bore
1
-
3355
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
External work -32 mm dia
10
-
4270
... More
40 mm dia
100
-
49500
... More
Providing and fixing gun metal non- return valve of approved quality
(screwed end) : 32 mm nominal bore
2
-
1610
... More
40 mm nominal bore
2
-
1960
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
4052
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
1
-
896
... More
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
12
-
6600
... More
Providing and fixing brass stop cock of approved quality 15mm nominal bore
4
-
2400
... More
Providing, Fixing,testing and commissioning of Vertical Storage Water Heater (Geyser) with Flexi Pipe, 5 Star Havells Instanio-6Litre capacity
4
-
34000
... More
Providing, Fixing,testing and commissioning of Vertical Storage Water Heater (Geyser) with Flexi Pipe, 5 Star Havells Instanio- 15Litre capacity
8
-
84000
... More
Supply & Installation of SOVISY - SMC Panel Tank confirming to: IS 14399 (Part 1& 2): 1996 & IS 4249 :1967 (50mm Insulated ) 10000 ltr
1
-
200000
... More
Providing, jointing, testing and fixing UPVC Soil, Waste & Vent system Class Bconforming to IS : 13592 and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials. Jointing shall be done with pushfit EPDM ring jointing technique in general. Solvent cement joints may be provided for fittings and specials which are not manufactured with pushfit rubber joints.Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection and also pipes may be laid / fixed in sunken floors, under slung from ceiling. The pipes laid in sunken floor shall be encased with not less than 75 mm thick cement concrete (1:2:4) all around.The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All major MS structure to hold the stack is included in this item) as approved by architect and complete in all respect.110 OD Type B
160
-
73600
... More
Providing, fixing, jointing and testing UPVC soil, waste, vent pipework comprising UPVC pipe conforming to IS :4985-1983 of class 3 ( 6kg/cm2) as specified below and fittings (moulded as well as fabricated) like elbows, bends, reducers, threaded tail pieces, caps, suitable elbow with suitable extension piece for drain point and other specials jointing with cement solvent, chasing, cutting and making good the walls & floors pipes laid in floors shall be encased with 40 mm thick concrete all around, complete in all respects including testing of complete installation.(All major MS structure to hold the stack with fixing including anchor fasteners, sand, cement etc is included in this item) as approved by architect and complete in all respect.40 mm dia 6 kg/cm2 (Class III )
10
-
2750
... More
50 mm dia 6 kg/cm2 (Class III )
10
-
3010
... More
Providing and fixing UPVC/SWR trap (P trap) of self cleaning design as per IS:13592 : 1992 complete including cost of cutting and making good the cutouts in walls and floors etc.including cutting and making good the walls and floors wherever required complete as approved by architect and complete in all respect. as approved by architect and complete in all respect.110 mm inlet and 110 mm outlet
27
-
10800
... More
Providing and fixing floor drain made out of 110x63 mm OD uPVC. elbow connected to uPVC pipe complete as per direction of Project Manager as approved by architect and complete in all respect as approved by architect and complete in all respect.
5
-
450
... More
Providing and fixing Inlet Fitting for Urinal trap, formed out of 110 mm PVC pipe with multiple side inlets formed with saddle pieces, suitable for 40, 50 and 63 mm dia side connections as per standard detail and support through galvanized steel support from slab or set in cement concrete mix 1:2:4 including cutting and making good the walls and floors wherever required as approved by architect and complete in all respect..
4
-
1400
... More
Providing and fixing Heavy Class SS grating of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and FT, UT & FD as approved by architect and complete in all respect..Size 100 mm X 100 mm
36
-
19800
... More
Providing and fixing P.V.C. WC connector (straight or bend type) with rubber lip ring. Including 110 mm dia PVC pipe / bend of required length and proper connection with M seal to C.I. pipe complete as required as approved by architect and complete in all respect..
12
-
2700
... More
Providing and fixing cleaning eye 110mm dia on horizontal UPVC soil & waste pipes of 300 mm long UPVC pipe with one plain end lead caulked in to the collar of UPVC pipe and the other end with flange which in covered by neoprene rubber gasket and blank flange, complete with nuts, bolts etc and hot dip galvanization after fabrication to the satisfaction of Project Manager as approved by architect and complete in all respect..100 mm dia
4
-
720
... More
DWC ID SN-8 Pipe(HDPE Black Pipe) with Coupler & Rubber Ring as per IS:16098(PART 2) 150 mm Dia
100
-
55000
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 150 mm Dia pipe sand filling-including all carraige complete
100
-
180000
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5-100x100 mm size P type
4
-
10000
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
-
45800
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, outside plastering with cement mortar 1:3(1 cement : 3 coarse sand), foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
11990
... More
Providing / fixing HVAC system Specification and items deatiails enclosed with NIT .(PDF A)
1
-
8042374
... More
Electrification work of indoor Stadium :- specification and items details are enclosed with NIT (PDF B)-
1
-
12132696
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements