Public Works Department Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 12,09,160Document Cost
₹ 5,200Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_13886_1Bid Award Id
ViewTender No
104 CDL of Leh of 2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
All kinds of soil( For 4.5 to 6m)
419.49
-
207.58
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
624.51
-
168.39
CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
46.96
-
4494.76
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
10.82
-
7670.24
REINFORCED CEMENT CONCRETE : Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.
35.51
-
288.97
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1638.63
-
632.2
Suspended floors, roofs, landings, balconies and access platform.
227.83
-
700.24
Shelves (Cast in situ)
20
-
700.24
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
204.51
-
553.98
Columns, Pillars, Piers, Abutments, Posts and Struts
50
-
749.31
Stairs, (excluding landings) except spiral-staircases
10.51
-
889.62
Small lintels not exceeding 1.5 m clear span, mouldings as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
25
-
288.97
Edges of slabs and breaks in floors and walls Under 20 cm wide
123.08
-
266.94
Weather shades, chajjas, corbels etc. including edges.
10
-
995.64
Steel Reinforcement for R.C.C. work including straightening ,cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe 500D or more
62046.88
-
94.03
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe 500D or more
12256.08
-
93.03
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
10
-
57.31
DESIGN MIX CONCRETE: Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level
344.7
-
7313.95
All works above plinth level upto floor V level
76.6
-
8600.59
MASONRY WORK:- Providing and laying autoclaved aerated cement blocks masonry with150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).
15.14
-
6219.53
FAÇADE WORK: Providing and applying exterior/interior grade texture coating made from Acrylic Copolymer resins combined with quartz, silica, mineral aggregates, synthetic inorganic pigments, bactericide, fungicides and various other additives in .5 to 1mm thickness having speading rate of 5 to 6 sqft per kg. Base Coat applied with brush or wool roller after diluting, Base Coat material with sufficient water. Final coat applied undiluted with trowel and then finished with acrylic trowel to obtain the specified groves complete in all respect to the entire satisfaction of Engineer Incharge.
320.87
-
593.22
FLOORING WORK: Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate
129.54
-
513.56
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
10.25
-
1338.24
WALL LINING/DADO: Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
21.93
-
1337.6
WOOD & PVC WORK: Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)
3.6
-
9238.53
Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete
12
-
168.67
Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete.
12
-
96.45
Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete
12
-
183.43
Filling the gap in between aluminum frame and adjacent
RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5mm width
10
-
94.97
Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of Engineer-in-charge complete
2.83
-
4243.95
STEEL WORK: Providing and fixing circular/hexagonal cast iron box for ceiling fan clamp, of internal dia 140 mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamps shall be made of 12mm dia M.S. bar bent to
shape as per standard drawing.
2
-
239.19
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab
with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
497.1
-
661.47
ROOFING WORKS: 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0.
197.5
-
934.02
Extra for every additional 1cm thickness of mud phaska.
197.5
-
20.71
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.
80.52
-
240.11
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete
10
-
251.49
RAIN WATER SPOUT AND PIPE: Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre
30
-
390.88
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee with door : 110x110x110 mm
10
-
314.81
Single tee without door : Shoe (plain), 110 mm shoe
10
-
138.09
Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
30
-
336.02
FINISHING: 12 mm cement plaster of mix : 1 : 4 ( 1 cement : 4 fine sand)
1610.26
-
286.49
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
491.86
-
164.2
ROAD WORKS: Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).
Note: Cement content considered in this item is 303 kg/ cum
Excess/less cement used as per design mix is payable/recoverable separately
45
-
8027.24
WATERPROOFING WORKS: Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures as directed by Engineer-in-Charge and consisting of :
i) 1st layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the levelling course (levelling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with waterproofing compound in recommended proportions.
iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
23.1.1 Using rough kota stone
401.2
-
1786.18
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar
1:3 (1 cement : 3 coarse sand) 20mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-Charge:
23.2.1 Using rough kota stone.
388.38
-
2284.86
PHE- Providing and fixing water closet squting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixture complete, including cutting and making good the walls and floors wherever required: White vitreous china Orissa pattern W.C pan of size 580x440 mm with integral type foot rest.
1
-
4899.45
Providing and fixing wash basin with CI brackets,15mm C.P. brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings & brackets,cutting and making good the walls wherever required. White Vitreous china wash basin size 630x450 mm with a single 15mm CP brass pillar tap.
1
-
1621.82
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete - Flexible pipe 40mm dia
1
-
88.43
Providing and fixing mirror of superior glass (of approved quality) and of required shape & size with plastic moulded frame of approved make & shade with 6mm thick hard board backing. Rectangular shape 453 X 357 mm
1
-
982.16
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality & colour. 750x20mm size. 600mm long towel rail with total length of 645mm,width 78mm & effective height of 88mm,weighing not less than 190gms.
1
-
508.77
Providing and fixing brass bib cock of approved quality conforming to IS 8931.
1
-
554.87
Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931
1
-
835.55
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
2
-
681.48
Providing and fixing C.P.brass extension nipple(size 15mmx50mm) of approved make and quality as per direction of Engineer-in -charge.
2
-
79.19
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 75mm outer dia
15
-
394.07
110 mm outer dia
15
-
538.98
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required.- 40mm outer dia
10
-
280.51
50 mm outer dia
10
-
392
63 mm outer dia
10
-
503.39
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. 100 mm inlet and 100 mm outlet. ( with 127dia Glossy CP Grating
1
-
413.56
100 mm inlet and 75 mm outlet. (with 102 mm dia CP Glossy Grating Jayna model no. RRB 102).
1
-
454.24
Providing & fixing 110mm x 50mm waste with PVC reducer including cutting chases in floor, cutting RCC slab complete as required.
1
-
327.97
WATER SUPPLY: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. Internal work-exposed on wall, including fixing the pipe
with clamps at 1.00 meter spacing. 20 mm nominal outer dia pipes.
20
-
319.65
25 mm nominal outer dia pipes.
10
-
390.55
Making connection of GI distribution branch with GI main of following sizes by providing and fixing tee,including cutting and threading the pipes etc, complete. 25 to 40mm nominal bore
1
-
734
Fixing water meter and stop cock in GI pipe line including cutting and threading the pipe and making long screws etc. Complete (cost of water meter and stop cock to be paid separately).
1
-
641.13
Providing and fixing gunmetal gate valve with CI wheel of approved quality(screwed end). 25 mm dia nominal bore
1
-
599.15
20 mm dia nominal bore
1
-
510.8
Providing and fixing P.V.C connection with brass union. 45cm length. 15mm nominal bore
2
-
96.84
Providing and placing on terrace (at all floor levels) Polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement amd making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
500
-
15.25
Providing & fixing 6mm thick nitryl rubber insulation on water pipes-15 to 32 mm dia pipes burried inside walls
30
-
296.61
Providing & fixing 12mm thick nitryl rubber insulation on water pipes-15 to 65 mm dia pipes
30
-
466.1
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth,including consolidating each deposited layer by ramming,watering,etc. and disposing of surplus excavated soil as directed ,within a lead of 50m. Pipes. cables exceeding 80mm dia but not exceeding 600mm dia.
2500
-
490.34
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
600
-
168.39
Providing and laying light duty non-pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 150 mm dia. R.C.C. pipe
800
-
496.97
250 mm dia. R.C.C. pipe
800
-
805.12
300 mm dia. R.C.C. pipe
400
-
712.08
450 mm dia. R.C.C. pipe
300
-
925.69
600 mm dia. R.C.C. pipe
200
-
2094.43
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 20.7.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 20.7.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 75. Withcommon burnt clay FPS (non modular)bricks of class designation 7.5.
30
-
20230.68
Extra for depth for manholes Size 120x90cm With common burnt clay FPS (non modular)bricks of class designation 7.5 Size 120x90cm
5
-
8497.17
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 20.9.10 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay FPS (non modular)bricks of class designation 7.5
60
-
9443.08
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 19.9A.1 1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
20
-
18277.19
Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :
19.9B.1 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
39784.39
Extra depth for circular type manholes: Manhole 0.91m internal dia (at bottom) beyond 0.91 m to1.67 m With common burnt clay FPS (non modular)bricks of class designation 7.5
15
-
6078.29
Manhole 1.22 m internal dia (at bottom) beyond1.68m to2.29 m With common burnt clay FPS (non modular)bricks of class designation 7.5
15
-
7902.01
Manhole 1.52 m internal dia (at bottom) beyond 2.30 m. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
15
-
18488.67
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistant test as per specification and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manhole with 30x20x15 cm cement concrete block 1:3:6 (1cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
400
-
408.4
Providing and fixing in position pre-cast RCC manhole cover and frame of required shape & approved quality MD-10Circular shape 500mm internal diameter
90
-
928.66
Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design: 20.23.1 Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating.
30
-
4650.71
20.23.2 Chamber size 45x45x77.50 cm including precast R.C.C grating with frame 450x100 mm vertical grating.
30
-
5249.56
ELECT- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.. Group C
16
-
911.44
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group- C
16
-
727.12
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
6
-
1522.88
Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :- Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required
10
-
254.24
Circuit / Sub main wiring in PVC Conduit :- Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm Earth wire.
200
-
212.29
2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire. (AC & gyser points)
50
-
316.53
2 x 10 sq.mm. + 1 x 6 sq.mm. Earth wire
100
-
416.95
4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire. (Type C & D Flats Submains)
200
-
436.02
S/F light plug point Modular Type Accessories :- Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
20
-
509.75
S/F power plug point modular Type Accessories :- Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
5
-
629.24
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
5
-
1373.73
DISTRIBUTION BOARDS & MCB's:- Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as Required. Single pole
5
-
379.45
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
2
-
11.02
Supplying and Fixing Following way, Horizontal Type Three Pole and Neutral, Sheet Steel, MCB Distribution Board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 Way (4 + 18), Double Door
1
-
4694.49
8 Way (4 + 24), Double Door
1
-
5848.73
Supplying and fixing following way, Single Pole and Neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 Way Double door.
1
-
2237.29
12 Way Double door.
1
-
2609.75
S/F DP MCB Isolator- Supplying and fixing following Rating, Double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 40 Amps
2
-
368.64
S/F 4P MCB Isolator- Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 63 Amps
2
-
1864.41
S/F DP (RCCB)- Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 40 Amps
5
-
2663.14
INTERNAL LIGHTING FIXTURES & FANS- Supply of Recessed Mounted Energy Efficient, LED Luminaires 18W LED Down Light Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc.as required.
10
-
2043.22
Supply, of Linear & Compact 10W Mirror Light with Decorative Grey Caps, Polycarbonate Body & Ribbed Opal Diffuser.
1
-
466.1
Supply of LED Luminaires BATTEN 20W LED Tube Light of Box Type Prewired Indoor Luminaire with Energy Efficient Electronic Ballast, with End Caps Complete as Required.(Technical Data - System power 20W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥100)
5
-
531.36
Supply of LED Luminaires BATTEN 40W LED Tube Light of Box Type Prewired Indoor Luminaire with Energy Efficient Electronic Ballast, with End Caps Complete as Required.(Technical Data - System power 20W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥100)
5
-
972.88
Supply of Bulk Head Luminaire, heat resistant Glass cover . suitable for 10W to 15W LED or Equivalent. (Technical Data - System power 10W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥80)
5
-
1062.71
SUPPLY OF EXHAUST FANS: Supply of AC 230/250 volts, 50 HZ - 300mm Exhaust Fans Including Providing Nuts, Bolts, Mounting Frame and Other Accessories etc. Complete as Required. 300 mm sweep 900 rpm
12
-
1830.51
ERECTION OF LIGHTING FIXTURES AND FANS: Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
38
-
2313.56
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as Required.
201
-
174.58
Installation of Exhaust fan in the existing opening, including making good the damage, Connection, Testing, Commissioning etc. as Required. Upto 450 mm sweep
6
-
381.36
Fixing Louvers / Shutters for Exhaust Fan: : Extra for Fixing the Louvers/ Shutters Complete with Frame for a Exhaust Fan of all sizes.
6
-
175.42
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
6
-
145.97
EARTHING : - Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
4
-
6332.2
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
160
-
206.78
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
50
-
59.32
SEWAGE TREATMENT PLANT (MBR TECHNOLOGY ): Supplying, installing, testing & commissioning of Sewage Treatment Plant of 360 KLD based on MBR technology (excluding excavation, back filling & disposal of surplus earth MS / Civil construction work) for the following duty:- BS Enviro
Nature of Sewage - Domestic Sewage waste water shall be discharged into the STP. Design to take consideration of same. Nature of Waste - Domestic Sewage from toilets, wash rooms & kitchen waste water, discharged into the STP. INLET SEWAGE CHARACTERSTICS pH - 6.0 – 8.5, BOD - 250 - 300 mg/l, S. Solids - 200-400 mg/l, COD - 400-600 mg/l, Oil & Grease - 25-50 mg/l ,OUTLET EFFLUENT CHARACTERSTICS, pH - 6.0 – 8.0, BOD - Less than 10 Mg/L, S. Solids - Less than 5 Mg/L, COD - Less than 20 Mg/L, Oil & Grease - below detectable level , Turbidity - Less than 1 NTU Electro-Mechanical Equipment: Bar Screen : Supply, installation, testing & commissioning of 1 Nos. Stainless Steel-304 Peforated Manual Coarse Bar Screen of size 600 mm wide x 800 mm Height fabricated through suitable thick SS plate. The perforation should be 20 mm Screen to be placed in RCC Screen Chamber. Make-BS ENVIRO/Fabricated
1
-
40932.2
Supply, installation, testing & commissioning of 1 Nos. Stainless Steel-304 Peforated Manual Fine Bar Screen of size 600 mm wide x 800 mm Height fabricated through suitable thick SS plate. The perforation should be 10 mm Screen to be placed in RCC Screen Chamber. Make-BS ENVIRO/Fabricated
1
-
40932.2
Supply, installation, testing & commissioning of Stainless Steel 304 Mechanical Rotary Drum type punched hole Fine Screen with automatic self cleaning system Size: 2-3 mm. the screen shall be interlocked with Sewage transfer pump. Design Flow Rate - 19 m3/hr.
Type : Rotary Drum Screen with 2-3 mm opening. Make-BS ENVIRO/Fabricated
1
-
716313.56
Supply and fixing of meachenical belt type Oil Skimmer basin MS housing with Belt for 1/2 Lph flow rate capacity complete in all respect. . Make-BS ENVIRO
1
-
71631.36
Supplying and fixing of fully Submersible, centrifugal non-clog sewage handling type pump for raw sewage transfer from equalization tank to Anoxic Tanks. The pump shall have CI casing, CI impeller and SS shaft, TEFC induction motor suitable for 415+10%Volt, 3 Phase, 50 Cycles AC Power supply, Mechanical seal, Pump lifting arrangement/lifting device of pull chain/guide rail for the pump, sequence running controller, dry running protection, level controller complete with probe complete in all respect including delivery header & Isolation Valves to make system Complete. Make: Kirlosker/Wilo/CRI, Equlisation Transfer Pump, Capacity/Flow rate - 18 m3/h, Pumping Head - 10 Mtr, Solid Handling: 20-30 mm, Set of 2 Nos. Pumps (1 Working +1 Standby)
1
-
155542.37
Aeration System: Air diffusion system shall include the following: Air Blower for Equalization , sludge tank & aeration tank : Air blowers of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. Numbers & capacity as per requirement with standby to be specified by vendor. Capacity: 380 m3/h x 4.5 m head, Qty (1W+1S)
1
-
589423.73
Air Blower for Air scouring for MBR Module : Air blowers of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply. Numbers & capacity as per requirement with standby to be specified by vendor. Capacity: 150 m3/hr @ 4.5 m (As per MBR supplier recommendation) Qty (1W+1S) Make: Everest/Akash
1
-
352016.95
Supply and fixing Disc type, EPDM Membrane based, Coarse Bubble Diffuser capable of handling 2-3 cfm of air Air dispersion grid shall be assembled on fixed grid for equalisation tank & sludge holding tank. Make: Rehau/Mmaqu/Airfin/Scogen
1
-
40932.2
Supply and fixing Tube type, EPDM Membrane based, non clog type air dispersion system capable of handling 3-5 cfm of air with oxygen transfer efficiency of 3-4% per/meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired easily from plat form at the top. (Imported fine bubble membrane diffusers for Aeration tank) . Make: Rehau/Mmaqu/Airfin/Scogen. Note : Air dispersion system shall be provided for Equalisation tank, Aeration tank and Sludge holding tank.
1
-
163728.81
Supply, installation, testing and commissioning of Agitator in the Anoxic Tank to keep the sewage in mixed regime. The MOC of mixer shall be Body- CI : Propellar- SS with suitable guide rail. Drive - Motor- (Kw Rating as per design) with all accessories.
Quantity - 1 Working . Make- Bsenviro
1
-
112563.56
Supplying, installing, testing & commissioning of All Piping (as described below) and isolation control valves for making the system complete. Providing, fixing, jointing and testing in position the following MS. pipes conforming to IS:1239 cut to required lengths including all necessary fittings (conforming to IS:1879)and specials such as bends, tees, unions, reducers, flanges & plugs etc. for-Raw Sewage, Permeate & Sludge Raiser pipe & Air NonSubmerged 80 MM DIA
60
-
1940.68
100 MM DIA
10
-
2620.34
Providing, fixing, jointing and testing in position the following UPVC to required lengths including all necessary fittings and specials such as bends, tees, unions, reducers, flanges & plugs etc.For-Submerged air dispersion grid & pumped effluent submerged & tank over flow 40 MM DIA
110
-
655.08
80 MM DIA
140
-
1473.73
100 MM DIA
30
-
2387.29
Providing and fixing Butterfly Valve (WaferType), PN-1.6 pressure rating with S.G Iron Disc including rubber gasket, flanges, nuts, bolts, washers & painting complete as required. 80 MM DIA
22
-
3929.66
100 MM DIA
5
-
4366.95
Providing & fixing Cast Iron Non-Return Valve PN-1.0 (Flanged). Including rubber gasket, flanges, union, nuts, bolts, washers & painting complete as required. 80 MM DIA
23
-
7859.32
100 MM DIA
5
-
10642.37
Supply, installation, testing & commissioning of MBR Modules of hollow fibre/Flatsheet reinforced filteration membranes with SS skid for housing the membrains & air grid for sccouring the sludge etc. complete in all respect as required. Capacity- 360 KLD Supply, installation, testing & commissioning of MBR modules of hollow fibre/Flat Sheet reinforced filteration membranes. Membrane shall have max pore size of 0.04-0.08 micron. Membrane Type- Hollow Fibre/Flatsheet. MOC : PVDF, Type- Outside in, maximum Design Flux - 26-30 LMH, Make- Toray/Mitsubishi
1
-
6775169.49
Supply and fixing of horizontal centrifugal pumps. The pumps shall have CI body & CI impeller & shaft & sleeve, Mechanical Seal are connected to a TEFC induction motor Motor to be suitable for 400/440 V, 3 Phase, 50 cycles AC power supply, including all necessary piping, valves, accessories, level controller complete complete as required with VFD. MBR Permeate cum backpulse pump. Capacity/Flow rate - 18 m3/h, Pumping Head - 10-12 Mtr , Nos. of Pump = 1 Set (1Working +1 standby), Make- Kirloskar/wilo/eq
1
-
184194.92
Membrane CIP system: Make- E Dose/Minidose
1
-
317224.58
The UV unit shall have with reactor, cabinet housing, cabinet cooling, treatment chamber, electrical panel, temperature safety control, lampout alert, UV radiometer along with all requirement. Flow Rate:- 18 M3/hr, Make: Alfa/Creative/ Sukrut, Purpose : For Disinfection of water
1
-
308014.83
Supply and fixing of horizontal monobloc centrifugal Sludge disposal pump for the disposal of sludge from MBR to sludge holding tank. The pumps shall have CI casing, CI Impeller & CS shaft & sleeve with mechanical rotary shaft seal connected by a flexible tire type coupling to TEFC induction motor suitable for 415+10% Volts, 3 Phase, 50Hz, AC Power Supply mounted on a common channel base-plate with coupling guard, 150 mm dia pressure gauge with GM isolation cock, suitable vibration eliminator pads under foundation of approved design, dry running protection including all necessary piping, valves, level controller complete with probs and other accessories complete as required. Make- Kirloskar/wilo/eq, Sludge Recycling Pump , Capacity/Flow rate - 36 m3/hr, Pumping Head - 10-12 mtr, (Solid handling size for this pump shall be 7-10 mm), Set of 2 Nos. Pumps (1 Working +1 Standby)
1
-
221033.9
Supply, installation, testing and commissioning of Filter press suitable with interconnecting piping of required capacity complete in all respect . Size : 18 x 18 + 17 plate. Make -Pharmatech/Universal
1
-
194427.97
Supply and fixing of Screw type Filter press feed pump of suitable capacity 2 m3/hr with all required accesary (1w+1s), Make- UT/roto
1
-
157794.97
Supply, installation, testing & commissioning of Poly dosing system comprising of 100 ltrs HDPE tank with 0-6 LPH electronic metering type pump and SS agitator complete with motor. Make : E-Dose/minidose Purpose : For Thickening of Sludge
1
-
55258.47
Supply, installation, testing & commissioning of Chlorine dosing system comprising of 100 ltrs HDPE tank with 0-6 LPH Hypochlorite Dosing electronic metering type pump. Make: E-Dose/minidose. Purpose : For Disinfection of water
1
-
30699.15
Sump Pump: Capacity/Flow rate - 18 m3/h, Pumping Head - 10 Mtr, Solid Handling: 15 mm, Set of 2 Nos. Pumps (1 Working +1 Standby)
1
-
155542.37
Supply, installation, testing & commissioning of Heating system of required capacity to maintain the temperature of sewage between 25 to 35 0C for bacterial growth OutflowHeaters/SSSheathed/TubeDia1.5” /Rewireable type / Brazed with MS Flange / as per requirementControl Panel Enclosure Consisting following : 1. MCB 2. Contactors 3. Indicators 4. On / Off Switch 5. Digital Temp. Controllers with 3 Mtr Sensors 6. Factory Internal Wiring with Best Quality CopperConductor with Lugs . 7. Glanding / Earthing
1
-
1388135.59
ELECTRICAL AND INSTRUMENTATION FOR INSTALLATION FOR SEWAGE TREATMENT PLANT: Design, supply, installation, testing and commissioning of STP Main Electrical Panel (MCC) housing with individual DOL starter of suitable capcity upto 10 HP motor and Star delta starter above 10 HP motor panels for various loads complete in all respects with suitable switchgear. It shall be provided with metering, MCCB Units, lamps, bus bars etc. The accessories used shall conform to the latest IS codes. Panel shall have proovision of PLC and HMI for the automation. MCC -1 (Sewage Treatment Plant) , Make : CPRI Approved
1
-
936991.53
Suppy, installation, testing & commissioning of electro-mangnetic type flow meter at inlet of reactor tanks. Make: Aster/Electronet/Eqvt. Purpose : For Measure flow quantity with time
2
-
79871.19
Supply, Installation, Testing & Commissioning of Water level controller for operation of the system connected to control panel for automatic switching ON / OFF of each pump. Make: aster, Purpose : For control Amount of Influent in tank
1
-
49919.49
Supply, Installation, Testing & Commissioning of pressure gauges with in all respect Make: H Guru/Inflow/Waree/Eqvt. Purpose : For Measure & Indicate the pressure into vessel
1
-
30534.18
Supply, Installation, Testing & Commisioning of PH Indicator with in all respect. Make: Aster/Hanna/Eqvt. Purpose : For measure acidic & alkaline nature of water
1
-
35942.03
Supply, Installation, Testing & Commisioning of online monitoring system with in all respect. Make- Tethys/ Forbes Marshall / Xylem
1
-
2336232.2
MEDICAL WASTE PROCESSING EQUIPMENT : FOR 300 BED HOSPITAL, BIOMEDICAL WASTE STERILIZER RECTANGULAR MODEL: High Pressure Triple Walled for Dry Sterilization (1340C at 30psi) complete with Steam Jacket & Separate Boiler with Radial Locking System, Inner Chamber made of SS (304 Grade) self-locking safety door, insulated, steam boiler, Pressure Gauge, Safety valve, Vacuum Breaker, Drain valve, Low water Cut off Device, Pressure Control Switch. Discharge line Sterilization cycle controlled by PID based digital automatic controller With inbuilt data logger to monitor temperature & pressure at different time intervals with memory card reader & Printer. Horizontally mounted on a sturdy, heavy M.S. duly painted or SS tubular stand (202 Grade). Workable on Three Phase 440 volts A.C. supply. Item No.- RS-9, Size- 750 x 750 x 1500 mm, Load-36, Cap:- 800 ltr
1
-
3186440.68
Optional at an Extra Cost: PLC based HMI Touch Colored Screen Panel with pen drive port communication.
1
-
294915.25
Vacuum Pump at extra Cost
1
-
122033.9
BIO-MEDICAL SHREDDER : Sturdy Fully Automatic, Electrically Controlled. Fully enclosed with no chances of Aerosol. Automatic Reverse Rotation under Load. Shredder having Low RPM, High Torque with Gear Box and Electrical Motor. Mesh Size– appropriately provided to shred small or big medical waste. Having Low Power Consumption. Fitted with 2 HP Motor. The Capability of shredder is to shred 5-8 Kg per Hour of Non-Infectious Waste only (Depending Upon Waste Quality). The operator can charge material in the shredder safely without any hindrance into the shredder without stopping the rotor of the shredder. The hopper of the shredder is such designed so that it can be easily opened to remove any oversize scrap or any material which is stuck and cleaning of the shredding chamber. Rotor & Blades of shredder made of high quality steel, hardened and grounded with very high service life. Fitted with control panel having over load relay & MCB, Emergency switch to stop shredder, Stop Starter for reverse rotation of motor & limit switch to ensure shredder operates only when the hopper is closed. Workable on 220 volts single phase AC Supply. Capacity : 80 Kg/Hr
1
-
705084.75
INCINERATOR PORTABLE : Useful for Medical Waste Treatment in Nursing Home, Blood Banks having Dual Chambers with 2 heating chambers (8500C & 10000C) with stack complete digitally controlled. ON WHEELS Workable on 220 / 440 volts A.C. Chamber Capacity 10 K
1
-
972881.36
Additional Facilities at an extra cost: (a) Dilution Process System
1
-
44067.8
Data Logger with Printing Facility .
1
-
33050.85
Complete Smoke Emission System with Chimney (For INCI-3 & INCI-4)
1
-
487288.14
Complete Smoke Emission System with Chimney (For INCI-5 & INCI-6)
1
-
563559.32
PLC Based HMI touch colored screen Panel .
1
-
135593.22
Thermal/ Dot-Matrix Printer can be attached with PLC based system .
1
-
29661.02
FOR 150 BED HOSPITAL, BIOMEDICAL WASTE STERILIZER RECTANGULAR :High Pressure Triple Walled for Dry Sterilization (1340C at 30psi) complete with Steam Jacket & Separate Boiler with Radial Locking System, Inner Chamber made of SS (304 Grade) self-locking safety door, insulated, steam boiler, Pressure Gauge, Safety valve, Vacuum Breaker, Drain valve, Low water Cut off Device, Pressure Control Switch. Discharge line Sterilization cycle controlled by PID based digital automatic controller With inbuilt data logger to monitor temperature & pressure at different time intervals with memory card reader & Printer. Horizontally mounted on a sturdy, heavy M.S. duly painted or SS tubular stand (202 Grade). Workable on Three Phase 440 volts A.C. supply. Size- 600 x 600 x 1200 mm, Load-18, Cap:- 450 ltr, Double Door
1
-
2324152.54
Optional at an Extra Cost: PLC based HMI Touch Colored Screen Panel with pen drive port communication.
1
-
289830.51
Vacuum Pump at extra Cost
1
-
125423.73
BIO-MEDICAL SHREDDER : Sturdy Fully Automatic, Electrically Controlled. Fully enclosed with no chances of Aerosol. Automatic Reverse Rotation under Load. Shredder having Low RPM, High Torque with Gear Box and Electrical Motor. Mesh Size– appropriately provided to shred small or big medical waste. Having Low Power Consumption. Fitted with 2 HP Motor. The Capability of shredder is to shred 5-8 Kg per Hour of Non-Infectious Waste only (Depending Upon Waste Quality). The operator can charge material in the shredder safely without any hindrance into the shredder without stopping the rotor of the shredder. The hopper of the shredder is such designed so that it can be easily opened to remove any oversize scrap or any material which is stuck and cleaning of the shredding chamber. Rotor & Blades of shredder made of high quality steel, hardened and grounded with very high service life.
Fitted with control panel having over load relay & MCB, Emergency switch to stop shredder, Stop Starter for reverse rotation of motor & limit switch to ensure shredder operates only when the hopper is closed. Workable on 220 volts single phase AC Supply.- Capacity : 50 Kg/Hr
1
-
550847.46
INCINERATOR PORTABLE : Useful for Medical Waste Treatment in Nursing Home, Blood Banks having Dual Chambers with 2 heating chambers (8500C & 10000C) with stack complete digitally controlled. ON WHEELS Workable on 220 / 440 volts A.C. Chamber Capacity 5 K
1
-
563559.32
Additional Facilities at an extra cost: (a) Dilution Process System
1
-
40677.97
Data Logger with Printing Facility .
1
-
32203.39
Complete Smoke Emission System with Chimney (For INCI-3 & INCI-4)
1
-
466101.69
Complete Smoke Emission System with Chimney (For INCI-5 & INCI-6)
1
-
555084.75
PLC Based HMI touch colored screen Panel .
1
-
210169.49
Thermal/ Dot-Matrix Printer can be attached with PLC based system. .
1
-
27118.64
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements