Public Works Department Tender

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

All kinds of soil : @90%

Soft Rock @10%

Random Rubble masonry with and stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand)

Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bound stone.

Reinforced cement concrete work in beams, suspended floors ,roofs having slope up to( 15 degree)landings ,balconies ,shelves ,chajjas,lintals bands ,plain windows sills ,stair cases and spiral stair cases up to floor five level excluding the cost of centering ,shuttering ,finishing and reinforcement with 1:2:4(1cement:2coarse sand :4graded stone agg.20mm nominal size.) crushed

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Including all sort of carriage complete

Centering and shuttering including strutting, propping etc. and removal of form for :

Dumping stone filling in horizontal on level incld. Cost of stone.

Dumping/Filling of stone into wire crate hand packed including earth work in back cutting, trench as required and supply and carriage of stone and including cost of crate.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). Including all sort of carriage complete

Providing and Fixing Crush Barier Single type at varanuable spot in 1:2:4 PCC, all Complete Job

Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. Including all sort of carriage complete