Public Works Department Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 9,60,000Document Cost
₹ 4,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_PWD_11643_10Bid Award Id
ViewTender No
50 of PWD RnB Nubra 2023-24Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
52.49
-
-
1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
27.79
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
4.86
-
-
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
34.34
-
-
Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square meter on damp proof courses after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
34.34
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.
103.95
-
-
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
18.22
-
-
Suspended floors, roofs, landings, balconies and access platform.
872.41
-
-
Shelves (Cast in situ)
6.48
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
886.68
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts
862.64
-
-
Stairs, (excluding landings) except spiral-staircases
53.46
-
-
Small lintels not exceeding 1.5 m clear span, mouldings as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
16.21
-
-
Edges of slabs and breaks in floors and walls Under 20 cm wide
48.28
-
-
Weather shades, chajjas, corbels etc. including edges.
34.91
-
-
Steel Reinforcement for R.C.C. work including straightening ,cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe 500D or more
55617.63
-
-
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
500
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level
78.45
-
-
All works ABOVE plinth level
292.34
-
-
providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)
48.77
-
-
Providing and Constructing cement stabilized mud block masonry (mud block made out of soil containing 60% to 70% of sand and 10% of clay and 5% of cement pressed using manual machine) in cement mortar 1:4 in walls. The size of the block is 305x143x100 mm. laid in course cement mortar as per the direction of Engineer in-charge Outer Wall Only including carriage complete job
289.27
-
-
Providing and applying exterior/interior grade texture coating made from Acrylic Copolymer resins combined with quartz, silica, mineral aggregates, synthetic inorganic pigments, bactericide, fungicides and various other additives in .5 to 1mm thickness having speading rate of 5 to 6 sqft per kg. Base Coat applied with brush or wool roller after diluting, Base Coat material with sufficient water. Final coat applied undiluted with trowel and then finished with acrylic trowel to obtain the specified groves complete in all respect to the entire satisfaction of Engineer Incharge.
1566.6
-
-
Designing , Providing and Fixing Mural in mix media with components and composition as follows at heights above 4mts & upto 20m from finished floor lvl. complete in all respect includung the cost of scaffolding etc. to the entire satisfaction of Engineer Incharge a) Fibre glass artwork in relief ,duly painted with exterior weather proof paints as per design fixed to wall with necessory required arrangement (50% to 60% of overall area) b) Glass Mosaic tile or ceramic tile in cutwork in cement sand mortar 1:2 or richer mix as required as per design (20% to 30% of overall area) c ) Texture coating rustic finish 2mm to 3mm Thick as per design (10% to 15% of overall area) d) Border of artwork with Stainless Steel 304 grade Steel tube of size approx. 150mmX 75mmX 4mm ** The contractor along with its specialized agency shall take instructions from client/architect, submit designs in 2D and 3D format for approval before execution of the work.
24
-
-
Providing and fixing solid wood designer cornice made out of wooden block of 600mmx200mm in desired profile as per detailed drawing including the cost of scaffolding, fixing arrangement like appropriate fastener and finishing the same with exterior grade transparent coating to the entire satisfaction of engineer incharge.(Shingstak)
12.5
-
-
Providing and fixing aluminium work for fixing aluminium louvers/ bands as per detail drawings with extruded built up standard tubular sections/ appropriate Z/T/C sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
250
-
-
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) 18mm
120.96
-
-
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
740.78
-
-
Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.
740.78
-
-
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
18
-
-
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate
110.88
-
-
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
107.41
-
-
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tile 600x600 mm
107.41
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
19.44
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
437.49
-
-
Providing and laying matt finished heavy duty vitrified tile of size 300x300x9.8mm or more having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
250
-
-
Providing and fixing thermally insulated laninated wooden flooring by fixing 12mm thk bwr grade plywood over ms tubular framework of 25mmx50mmx2mm tubular sections jointed together @ 600mm c/c in one direction and 300mm c/c in other direction fixed to concrete floor with 75mm deep rawl plugs @ 1200mm c/c , with the help of appropriate screws @ 600MM C/C followed by fixing AC-4 grade laminated wooden flooring strips in desired shade and texture on top of plywood with tounge and groove or any other screwless joints. Before fixing the plywood, a layer of 25mm thk 48kg/mcu. density thermocol shall be packed between framework for thermal insulation. The work shall be completed to the entire satisfaction of engineer incharge as per detail drawings issued
352.8
-
-
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
327.61
-
-
Providing and laying Polished Granite stone dado in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 12 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
2.88
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 2nd class kail wood
1.85
-
-
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35mm With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws
101.61
-
-
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :
26
-
-
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm
39
-
-
Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete
39
-
-
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete a) 300x10 mm
39
-
-
b) 150x10 mm
39
-
-
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete 125 mm
78
-
-
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Single rubber stopper
78
-
-
Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality 1mm thick
203.22
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm upto 2.50 sqm).
300.46
-
-
Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete
219
-
-
Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete.
438
-
-
Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete
219
-
-
Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5mm width
124.6
-
-
Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of Engineer-in-charge complete
243.38
-
-
Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete
14
-
-
Providing & fixing Factory manufactured Above counter cabinets (Overall depth=375mm-400mm, Overall height=upto1200mm) with All vertical and horizontal surfaces of box made in 18mm thk prelaminated particle board , All visible edges of covered with hot pressed and glued 2mm thk pvc edge binding tape of matching colour, Shutters made of 18mm thk prelaminated particle board, laminated with 1mm thk high gloss/textured laminate on front face and 1mm thk laminate matching with box on inside, All visible edges of shutter covered with hot pressed and glued 2mm thk pvc edge binding tape of matching. The shutters shall be fixed to frame with appropriate auto closing hinges of approved make and shall have 300mm high stainless steel handles.(Only front face of cabinets shall be measured for payment purpose)
6.48
-
-
Providing & fixing Factory manufactured Below counter cabinets (Overall depth=450-600mm, Overall height=upto 825mm) with All vertical and horizontal surfaces of box made in 18mm thk prelaminated particle board , All visible edges of covered with hot pressed and glued 2mm thk pvc edge binding tape of matching colour, Shutters made of 18mm thk prelaminated particle board. All visible edges of shutter covered with hot pressed and glued 2mm thk pvc edge binding tape of matching colour. The shutters shall be fixed to frame with appropriate auto closing hinges of approved make and shall have 300mm high stainless steel handles. Cabinets shall stand on floor with height adjustable pvc legs with appropriate high aluminium skirting fixed to pvc legs with clips.16mm-18mm thk. Granite stone top of approved shade shall be fixed to cabinets with Araldite with all edges half rounded and polished to mirror finish.(Only front face of cabinets shall be measured for payment purpose)
4.46
-
-
Providing and fixing Factory manufactured modular walldrobes made in 19mm thk both side prelaminated bwr grade ply and 25mm thk prelaminated flush door shutters as per following specifications: Overall depth=600mm, Overall height=upto 2700mm, All verticle and horizontal surfaces of box shall be made in 19mm thk bwr ply cladded with 1mm thk laminate. All visible edges of ply shall be covered with hot pressed and glued 2mm thk pvc edge binding tape of matching color , Back of cabinet shall be 12mm thk both side prelaminated particle board., Two number side by side Drawers made in 19 mm thk ply, laminated with 1mm laminate running on telescopic channels shall be provided., Two number side by side shoe rack Drawers made in 19 mm thk ply, laminated with 1mm laminate running on telescopic channels shall be provided. One number 25mm dia chrome plated rod for hanging clothes shall be provided, 2-4 number shutters made of 25mm thk flush door, laminated with 1mm thk high gloss/textured laminate on front face and 1mm thk laminate matching with box on inside. All visible edges of shutter shall be covered with hot pressed and glued 2mm thk pvc edge binding tape of matching color eith front face of cabinet. The shutters shall be fixed to frame with appropriate auto closing hinges of approved make., 2-4 number 600mm high stainless steel handles of approve shape/ make., Two/Four number 300mm high stainless steel handles of approve shape/ make., The work shall be carried out as per detail drg. including cost of horizontal shelves made in 19 mm thk ply, laminated with 1mm laminate on both sides and edges covered with 2mm thk pvc edge binding tape to the entire satisfaction of engineer incharge.(Only front face of cabinets shall be measured for payment purpose)
10
-
-
Providing and fixing circular/hexagonal cast iron box for ceiling fan clamp, of internal dia 140 mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamps shall be made of 12mm dia M.S. bar bent to
shape as per standard drawing.
30
-
-
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab
with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
583.2
-
-
10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0.
368.28
-
-
Extra for every additional 1cm thickness of mud phaska.
368.28
-
-
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.
137.64
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete
12
-
-
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre
144
-
-
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler
6
-
-
75 mm
6
-
-
Single push fit coupler- 75 mm
6
-
-
110 mm
6
-
-
Single tee with door- 75x75x75 mm
6
-
-
110x110x110 mm
6
-
-
Single tee without door- 75x75x75 mm
6
-
-
110x110x110 mm
6
-
-
Bend 87.5°- 75 mm bend
6
-
-
110 mm bend
6
-
-
Shoe (plain)- 75 mm shoe
6
-
-
110 mm shoe
6
-
-
Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
72
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process.
427.99
-
-
Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring ‘T’ with GI Metal Ceiling Clip in plain Beveled edge global white colour tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.
94.14
-
-
Providing and Fixing acoustical false ceiling panels made out of framework of appropriate section of kailwood as per span of panel. On one side of framework, 12mm thk soft board is fixed with nails/ screws. Top sideof the panel has to closed by 8mm thk bwr grade plywood after putting an infill of 50mm thk glasswool. Overall thickness of panels has to be 70mm. Visible bottom and sides of panels shall be cladded with fabric/leatherite of desired shade. The panels shall hang from ceiling with appropriate dia GI hooks upto a depth of 1500mm from true ceiling held by appropriate steel fasteners/hooks. The work has to be carried out as per drawing to the complete satisfaction of Engineer Incharge.
116.42
-
-
12 mm cement plaster of mix : 1 : 4 ( 1 cement : 4 fine sand)
2694.91
-
-
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)
1498.86
-
-
6MM CEMENT PLASTER
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
12.96
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
1939.56
-
-
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
250
-
-
Melamine polishing on wood work (one or more coats)
155.11
-
-
Providing and fixing GREEN GUARD CERTIFIED Restroom Cubicle with Standard dimension of 2003mm Height (including a gap of 150 mm from the ground) x 900mm Width x 1550mm (exact width and depth as per site), height remain fixed, including 600mm door size width COMPACT LAMINATE: 12mm thick Compact Laminate made as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard. The solid compact laminate (Phenolic Core Board) shall be based on thermostatic resin, homogeneously reinforced with cellulose fiber and laminate on both side with suede finish, scratch and impact resistant, to achieve the cubicles dimensions joint-less partitions. The cubicle system shall be equipped with heat and bacteria resistance. To supply and install Restroom System complete with SS Grade 316 Accessories, the modular shall possess 100% resistant properties towards: Water, chemical, impact. ACCESORIES: 1. SS Top Rail (Epoxy Powder Coated Aluminium in SS mill finish)
2. SS 316 Grade coat hook 3. SS Gravity Hinges (Stainless Steel Grade 316 with Satin Finish)
4. SS Latch cum Occupancy Indicator (Stainless Steel Grade 316 with Satin Finish)
5. 6063 micron Aluminium “U” Channel
6. SS Palm Design Adjustable Foot (Stainless Steel Grade 316 with Satin Finish)
7. SS Screws & Inserts (Stainless Steel Grade 316 with Satin Finish)
8. Epoxy powder coated Aluminium door stopper channel HARDWARE & FIXING: All screws shall be of 304 Grade in stainless steel with satin finish.The base diameter 65mm and neck diameter of 33mm anchored to the floor with grade 304 satin finish stainless steel screws with push fit capping at a clearance height of 150mm.Restroom cubicle shall be made in Heat and Bacteria Resistant material in which right angle bracket or aluminiums U-Channel shall be used for the fixing of intermediate panels to the wall.
18
-
-
Providing and fixing wall panelling with 12mm thk one side decorative laminated particle board panels over framework of 25mmx 50mm kailwood sections sections placed at max. 600mmc/c vertivally and max. 300mm c/c horizontally fixed to wall/rcc members @ 1200mm c/c with 75mm long rawl plugs. The panels shall be fixed to framework with necessory screws and exterior grade silicon which shall not be visible after fixing in desired shade as per detailed drawings complete in all respect to the entire satisfaction of engineer in charge.
391.3
-
-
Providing and fixing wall panelling with 12mm thk one side decorative laminated and perforated mdf board panels over framework of 25mmx 50mmx2mm kailwood sections placed at max. 600mmc/c vertivally and max. 300mm c/c horizontally fixed to wall/rcc members @ 1200mm c/c with 75mm long rawl plugs. The space between framework members shall be packed with a layer of 25mm thk 48kg/cum. density rockwool before fixing. There shall be a layer of 200 gsm cloth in desired shade between panels and framework/rockwool. The panels shall have desired design of perforation neatly cut by cnc machine.The panels shall be fixed to framework with necessory screws and exterior grade silicon which shall not be visible after fixing in desired shade as per detailed drawings complete in all respect to the entire satisfaction of engineer in charge..
136.08
-
-
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
40
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
2.25
-
-
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).
Note: Cement content considered in this item is 303 kg/ cum
Excess/less cement used as per design mix is payable/recoverable separately
30
-
-
PHE- Providing and fixing water closet squting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixture complete, including cutting and making good the walls and floors wherever required: White vitreous china Orissa pattern W.C pan of size 580x440 mm with integral type foot rest.
3
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid,10 litre low level white vitreous china flushing cistern & CP flush bend with fittings & CI brackets,40mm flush bend,overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI Marked white solid plastic seat and lid.
9
-
-
Providing and fixing wash basin with CI brackets,15mm C.P. brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings & brackets,cutting and making good the walls wherever required. White Vitreous china wash basin size 630x450 mm with a single 15mm CP brass pillar tap.
4
-
-
Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board 510 X 1040 mm bowl depth 250mm
3
-
-
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete - Flexible pipe 40mm dia
16
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape & size with plastic moulded frame of approved make & shade with 6mm thick hard board backing. Rectangular shape 453 X 357 mm
12
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality & colour. 750x20mm size. 600mm long towel rail with total length of 645mm,width 78mm & effective height of 88mm,weighing not less than 190gms.
4
-
-
Providing and fixing brass bib cock of approved quality conforming to IS 8931.
8
-
-
Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standard and Weighing not less than 810 gms.
4
-
-
Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931
28
-
-
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
56
-
-
Providing and fixing C.P.brass extension nipple(size 15mmx50mm) of approved make and quality as per direction of Engineer-in -charge.
28
-
-
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
12
-
-
Providing and fixing C.P.brass bottle trap 32mm size bottle trap of approved quality & make as approved by Engineer-in-charge.
28
-
-
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610x390x370mm having pre & post flushing with water(250ml & 500 ml consumption),having water inlet from back side,including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in -charge.
12
-
-
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site. 75mm outer dia
100
-
-
110 mm outer dia
100
-
-
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required.- 40mm outer dia
50
-
-
50 mm outer dia
50
-
-
63 mm outer dia
50
-
-
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. 100 mm inlet and 100 mm outlet. ( with 127dia Glossy CP Grating Jayna model no.RRB 127)
12
-
-
100 mm inlet and 75 mm outlet. (with 102 mm dia CP Glossy Grating Jayna model no. RRB 102).
12
-
-
Providing & fixing 110mm x 50mm waste with PVC reducer including cutting chases in floor, cutting RCC slab complete as required.
12
-
-
Providing & fixing Health Faucet with 8mm dia, 1M long PVC tube and wall hook.
12
-
-
Providing & fixing wall mounted 35 mm dia.,600mm long grab bar including cutting & making good the walls.Make: Jaquar; Cat No. AHS-1507/approved equal make.
8
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge. Internal Work - Exposed on Wall 20 mm nominal outer dia pipes.
50
-
-
25 mm nominal outer dia pipes.
100
-
-
32 mm nominal outer dia pipes.
100
-
-
40 mm nominal outer dia pipes.
50
-
-
50 mm nominal outer dia pipes.
50
-
-
Internal work Concealed work including cutting chases and making good the walls etc.- 20 mm nominal outer dia pipes.
200
-
-
25 mm nominal outer dia pipes.
100
-
-
32 mm nominal outer dia pipes.
50
-
-
External Work including trenching,refilling - 20 mm nominal outer dia pipes.
50
-
-
25 mm nominal outer dia pipes.
50
-
-
32 mm nominal outer dia pipes.
50
-
-
40 mm nominal outer dia pipes.
50
-
-
50 mm nominal outer dia pipes.
50
-
-
Making connection of GI distribution branch with GI main of following sizes by providing and fixing tee,including cutting and threading the pipes etc, complete. 25 to 40mm nominal bore
2
-
-
Fixing water meter and stop cock in GI pipe line including cutting and threading the pipe and making long screws etc. Complete (cost of water meter and stop cock to be paid separately).
2
-
-
Providing and fixing gunmetal gate valve with CI wheel of approved quality(screwed end). 25 mm dia nominal bore
4
-
-
20 mm dia nominal bore
4
-
-
32 mm dia nominal bore
4
-
-
40 mm dia nominal bore
4
-
-
50 mm dia nominal bore
4
-
-
Providing and fixing non return valve of approved quality(screwed end). - 32 mm dia nominal bore-vertical
4
-
-
Providing and fixing P.V.C connection with brass union. 45cm length. 15mm nominal bore
24
-
-
Providing and placing on terrace (at all floor levels) Polyethylene water storage tank with 75mm thk puff insulation marked with cover and suitable locking arrangement amd making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
10000
-
-
Supplying, installing, testing & commissioning horizontal centrifugal pump set with C.I. casing,bronze impller suitable for operation on 440 volts, 3 phase 2900 RPM electric motor,100 mm dia pressure guage, G.M. isolation cock complete as required. a) Domestic Water Recirculation Pumps with electrical panel & all controls, wiring/ cabelling Location - Near overhead domestic water tank 'Capacity 1 LPS each(2 nos.- 1 working,1 standby) Head 20 Mts RPM 2900 Pumping system as described above
1
-
-
Providing & fixing 6mm thick nitryl rubber insulation on water pipes-15 to 32 mm dia pipes burried inside walls
500
-
-
Providing & fixing 12mm thick nitryl rubber insulation on water pipes-15 to 65 mm dia pipes
500
-
-
Providing & fixing on wall face unplasticised -Ragid PVC rain water pipes conforming to IS ; 13592 Tyape A included jointing with seal ring conforning to IS ; 5382 leaving 10 mm gap for thermal expansion. a)110 mm diameter
60
-
-
Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes conforming to IS ; 13592 Type A including jointing with seal ring conforming to IS ; 5382 leaving 10 mm gap for thermal expansion. a)Coupler-110mm diameter
12
-
-
b) Bend-87.5deg-110mm diameter
12
-
-
c) Shoe-110mm shoe
12
-
-
Providing & fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1cement : 4 coarse sand) and making good the wall etc. complete. 110mm dia
180
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighting not less than 440 grams.
12
-
-
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 100mm diameter pipe
50
-
-
150 mm diameter pipe
50
-
-
200 mm diameter pipe
50
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100mm diameter pipe
50
-
-
150 mm diameter pipe
50
-
-
200 mm diameter pipe
50
-
-
250 mm diameter pipe
50
-
-
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil.
25
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth,including consolidating each deposited layer by ramming,watering,etc. and disposing of surplus excavated soil as directed ,within a lead of 50m. Pipes. cables exceeding 80mm dia but not exceeding 300mm dia.
150
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
15
-
-
Providing and fixing square mouth SW gully trap class SP-1 complete with CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg. as per standard design. 150x100mm size P type with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
4
-
-
180x150mm size P type with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
4
-
-
Providing and laying light duty non-pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 150 mm dia. R.C.C. pipe
50
-
-
250 mm dia. R.C.C. pipe
50
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : 20.7.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 20.7.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 75. Withcommon burnt clay FPS (non modular)bricks of class designation 7.5.
4
-
-
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete 20.17.1 For pipes 100 to 250 mm diameter
1
-
-
Constructing Oil & Grease Chamber size 1500x 750mm internal size of 1000mm depth in brick work of class 75 with cement mortar (1:5) Inside 12mm thick with cement mortar 1:3 with floating coat of neat cement and rough plaster on outside, RCC top slab with 500mm dia medium duty manhole cover with frame (weight of cover 58 kg. & weight of frame 58 kg.), 150mm thick foundation concrete (1 :4 : 8), necessary excavation, dewatering, refilling, watering, ramming and removing the surplus excavated material and making good the same complete as required.
1
-
-
ELECT- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
122
-
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
81
-
-
Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :- Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required
1060
-
-
Circuit / Sub main wiring in PVC Conduit :- Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm Earth wire.
688
-
-
2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire. (AC & gyser points)
40
-
-
4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire. (Type C & D Flats Submains)
240
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
47
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
53
-
-
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
1
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as Required. Single pole
96
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
2
-
-
Supplying and Fixing Following way, Horizontal Type Three Pole and Neutral, Sheet Steel, MCB Distribution Board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 Way (4 + 18), Double Door
3
-
-
8 Way (4 + 24), Double Door
3
-
-
Supplying and fixing following way, Single Pole and Neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 Way Double door.
1
-
-
S/F DP MCB Isolator- Supplying and fixing following Rating, Double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 40 Amps
1
-
-
S/F 4P MCB Isolator- Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 63 Amps
6
-
-
S/F DP (RCCB)- Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 40 Amps
18
-
-
TELEPHONE, TELEVISION & DATA SYSTEM- S/F MODULAR BOXES, BASE & COVER PLATE :- Supplying and Fixing Following Size/ Modules, GI Box Alongwith Modular Base & Cover Plate for Modular Switches in Recess etc. as required. 1 or 2 Module (75 mm x 75 mm)
2
-
-
S/F MODULAR TYPE SWITCH / SOCKET :- Supplying and Fixing Following Modular Switch/ Socket on The Existing Modular plate & Switch Box including connections But Excluding Modular Plate etc. as required. Telephone Socket outlet.
1
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25 mm.
40
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, Unarmored Telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
20
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
30
-
-
SITC Modular Type Computer jack RJ 45 ISI mark 1 Module on existing Mounting plate and box Complete.
1
-
-
INTERNAL LIGHTING FIXTURES & FANS- Supply of Surface Mounted Energy Efficient, LED Luminaires 12W LED Down Light (Round) Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc.as required.
52
-
-
Supply of Surface Mounted Energy Efficient, LED Luminaires 18W LED Down Light Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc.as required.
53
-
-
Supply, of Linear & Compact 10W Mirror Light with Decorative Grey Caps, Polycarbonate Body & Ribbed Opal Diffuser.
18
-
-
Supply of LED Luminaires BATTEN 20W LED Tube Light of Box Type Prewired Indoor Luminaire with Energy Efficient Electronic Ballast, with End Caps Complete as Required.(Technical Data - System power 20W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥100)
3
-
-
Supply of LED Luminaires BATTEN 40W LED Tube Light of Box Type Prewired Indoor Luminaire with Energy Efficient Electronic Ballast, with End Caps Complete as Required.(Technical Data - System power 20W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥100)
56
-
-
Supply of Bulk Head Luminaire, heat resistant Glass cover . suitable for 10W to 15W LED or Equivalent. (Technical Data - System power 10W, CRI ≥80, Power Factor ≥0.95, System Luminous Efficacy ≥80)
3
-
-
Supply of AC 230/250 volts, 50 HZ - 300mm Exhaust Fans Including Providing Nuts, Bolts, Mounting Frame and Other Accessories etc. Complete as Required 250 mm sweep 900 rpm (Dometic Exhaust for flats)
18
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
1
-
-
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as Required.
185
-
-
Installation of Exhaust fan in the existing opening, including making good the damage, Connection, Testing, Commissioning etc. as Required. Upto 450 mm sweep
18
-
-
Extra for Fixing the Louvers/ Shutters Complete with Frame for a Exhaust Fan of all sizes.
18
-
-
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
1
-
-
MAIN DISTRIBUTION PANEL - Design, manufacture, supply, installation, testing and commissioning of Floor/Wall Mounting Distribution Panel cubicle type panel fabricated out of CRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ complete with aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. INCOMER : 125 AMP FP MCCB BUS BAR : 125 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.8 sq mm/amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 6 No 63 AMP 4P MCB (DB's) 1 No 63 AMP 4P MCB (LIFT) 1 No 40 AMP DP MCB (M/C Room DB) 1 No 40 AMP DP MCB (Spare) 3 No 63 AMP 4P MCB (Spare) complete panel as above and complete
1
-
-
Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required. 3.5 C X 50 Sq.mm Al. XLPE arm.
100
-
-
Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground Including Excavation, Sand Cushioning, Protective Covering and Refilling the Trench etc. as required. Above 35 sq. mm and upto 95 sq. mm
100
-
-
Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. 3½ X 50 sq. mm (35mm)
4
-
-
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
-
-
SITC of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board with supply of all material labour T & P etc for proper completion of work. (Approx front area = 1.20 sq M)
1
-
-
SITC of First aid box as approved by Indian red cross conforming to IS : 2217.
1
-
-
SITC of CO2 Fire Extinguishers 4.5 kg capacity complete in all respect ISI : 15683 marked.
1
-
-
SITC of ABC FIRE EXTINGUISHER 4 KG capacity complete in all respect ISI : 15683 marked.
1
-
-
SITC of Fire Bucket stand made of M S angle suitable for and with 4 Nos Fire Buckets of 9.5 Ltrs capacity.
1
-
-
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
2
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
80
-
-
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
20
-
-
HEAT PUMP SYSTEM: Supply of Side Throw Type outdoor units with Low power consumption. Highly efficient Inverter scroll compressors along with motor and drive arrangement, initial charge of refrigerant (R- 410A) and oil. Considering the low ambient, ODU Shall be capable of operating up to -25° C ambient temperature for Heating Mode without tripping. Compressor & ODU shall be of the same make to have better after sales service support. To achieve better energy effciency and lower electricity bills, Heat Mode COP of the units at 100% load shall not be less than 4.70 & COP data shall be printed in the catalog of the OEM. Heat Pump ODUs shall be capable of operating in following range: i. For Heating Mode: (-)25degC to 24degC 60 HP - SIDE Discharge Heat Pump
30
-
-
Supply of Indoor units, capacity as mentioned below. Multi-speed motor, coil section with DX coil, outer cabinet, drain pan mechanism insulation, pipe connections, etc. of various capacities. One-Way Cassette Indoor Units One-Way Cassette 1.0TR
3
-
-
One-Way Cassette 1.56TR
3
-
-
One-Way Cassette 2.02TR
14
-
-
Two-Way Cassette Indoor Units Supply of Wire Free Remotes Wire Free Remotes for Cassette indoors
20
-
-
Supply of Joints for Heat Pump system
30
-
-
Central Remote Controller for connection up to 256 indoor units, 1-year power distribution data storage, File save in Microsoft Excel format, Data query for watt-hour, use time and use ratio Current, actual power consumption monitoring, Current-type electricity meter support (CT ratio input), Based on web browser, Editable Control Logic
1
-
-
Installation , Testing and commissioning (duly certified through OEM) of Modular type outdoor units equipped with highly efficient scroll compressors along with motor and drive arrangement, initial charge of refrigerant (R-410A) and oil, piping expansion valve (if any), sight glass, high-low pressure cut-out, thermostatic control, supports for condenser unit etc. Air cooled condenser & its controller as described below of following actual capacities.Installation, Testing and Commissioning Indoor, Outdoor Unit, Loading and Unloading of Outdoors on Terrace. 30 HP - SIDE Discharge Heat Pump
30
-
-
INDOOR UNIT:- Installation, Testing and commissioning of Indoor units, capacity as mentioned below. Multi-speed motor, coil section with DX coil, outer cabinet, drain pan mechanism insulation, pipe connections, etc. of various capacities. One-Way Cassette Indoor Units One-Way Cassette 1.0TR
3
-
-
One-Way Cassette 1.56TR
3
-
-
One-Way Cassette 2.02TR
14
-
-
Installation, Testing and commissioning of Wire Free Remotes Wire Free Remotes - Cassette indoors
20
-
-
Installation, Testing and commissioning of Joints for Heat Pump system
20
-
-
Installation, Testing and commissioning of Central Remote Controller for connection up to 256 indoor units, 1-year power distribution data storage, File save in Microsoft Excel format, Data query for watt-hour, use time and use ratio Current, actual power consumption monitoring, Current-type electricity meter support (CT ratio input), Based on web browser, Editable Control Logic
1
-
-
Refrigerant Piping:- Supply, Installation, Testing and commissioning of interconnecting copper pipe work, duly insulated with class O elastomeric nitrile rubber type tubular insulation with star bond (as per below specified detail) between indoor & outdoor units as per specifications. All piping inside the room shall be properly supported & piping outside the building shalll be laid in raceways. 34.9 mm O.D. (insulation – 19 mm thick)
55
-
-
28.6 mm O.D. (insulation – 19 mm thick)
25
-
-
22.2 mm O.D. (insulation – 19 mm thick)
40
-
-
19.1 mm O.D. (insulation – 13 mm thick)
40
-
-
15.9 mm O.D. (insulation – 13 mm thick)
35
-
-
12.7mm O.D. (insulation – 13 mm thick)
95
-
-
6.4 mm O.D. (insulation – 13 mm thick)
95
-
-
Cable Tray:- Providing and fixing of GI cable tray with properly support complete with GI threaded. Cable Tray for copper piping (300 mm) without cover
50
-
-
Cable Tray for copper piping (150 mm) without cover
75
-
-
Providing and fixing rigid CPVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm thick closed cell nitrile rubber insulation 25 mm dia
70
-
-
32 mm dia
50
-
-
Supply & fixing of control cum transmission wiring of Copper Conductor Cable along with MS Conduit for looping between indoor & outdoor Heat Pump System & to main Central remote controller system 2 C X 1.5 Sq mm
310
-
-
MS Stand for Outdoor Unit Mounting
3
-
-
CCTV- Supply, Installation, Testing & Commissioning of 3MP IP Network TDN Low-Light IR Dome Camera, 1/2.8" CMOS or better, 3MP (2304 x 1296) @ 25fps or better, triple stream at various resolution up to 25fps, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 2 IR LEDs, Smart IR with upto 40m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265, H.264 & MJPEG ,Lens 2.8mm, Field of View FoV H:85°, V:45°, BLC, HLC, WDR, 3DNR, White Balance - Auto/Manual, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, 4 Privacy Mask, 8 Region Of Intreset, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 4W, IP 66/67 & IK10, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000) compliant.
8
-
-
Supply, Installation, Testing & Commissioning of 3MP IP Network TDN Low-Light IR Bullet Camera, 1/2.8" CMOS or better, 3MP (2304 x 1296) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 40m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, Lens 2.8mm, Field of View FoV H:85°, V:45°, BLC, HLC, 3DNR White Balance, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, 4 Privacy Mask, 8 Region Of Intreset, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 66/67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000) compliant.
2
-
-
Supply , Installation , Testing and commissioning of 32 Channel NVR (Network Video Recorder) Embedded Linux based for recording upto 32CH at D1 960fps with 04 nos. SATA HDDs minimum 40TB storage or more (recording requirement all cameras recording at D1, 25fps for 30 days), H.265 HEVC/H.264/MJPEG codec decoding, Front Panel with LEDs Indication for Power & HDDs Status, 3 nos. USB, ONVIF S, Time Sync with NTP, Encrypted Streaming & Control, 2-Way Audio Line & Out, PTZ Operation Pan, Tilt, Zoom, Support, Pre & Post Alarm Recording Support, Recording/Evidence Clip Export to USB, 16 Channel Synchronous Playback, Playback control i.e Play, Pause, Stop, Fast Forward, Backward, Speed Control, Timeline & Zoom; Snapshot, Web Client, Central Monitoring Software, iPhone; iPad; Android based Mobile clients, 02HDMI & 01VGA Output, 04 On Board HDDS each up to 10TB, Alarm Input (06 nos.), Alarm Output (02 nos.), 256 Mbps throughput, NDAA Section 889 Compliant, Operating Temperature –10°C to 55°C, Certification : Certifications: ONVIF compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032, NDAA & RoHS (EN63000) compliant. Including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge.
1
-
-
Supply, installation, testing and commissioning of Enterprise Class 8TB HDD.
1
-
-
Supply, installation, testing and commissioning of Video Management System (VMS) software shall be used to view live and recorded video from capture cards and IP devices connected to local and wide area networks. The VMS software shall have a client/server-based architecture that can be configured as a standalone VMS system with the client software running on the server hardware and/or the client running on any network-connected TCP/IP workstation. Multiple client workstations shall be capable of simultaneously viewing live and/or recorded video from one or more servers. Multiple servers shall also be able to simultaneously provide live and/or recorded video to one or more workstations. The VMS server software shall also have the ability to be installed on an IP edge device—such as an IP camera or encoder that allows for 3rd party applications—allowing the device to serve as both a server and IP video recording device.The VMS shall not charge for the number of concurrent clients (min. 50 thick clients and 16 mobile clients to be provided along with VMS).
8
-
-
Supplying Installation testing and Commissioning of 24 port 10/100/1000BASE-T ports and four GbE/10GbE SFP/SFP+ uplink ports, layer 3 from day1 having static & RIP ,stackable upto 10 switches, certified , each switch should be provided with stacking port/cable complete in all respect .
1
-
-
Supplying, Installation,Testing & Commissioning of 50 " LED Full HD TV Resolution 1920 x 1080 ,Contrast Ratio (Typical) 5000:1,Built-in Speaker (10W + 10W), Premium-Swith Mounting Brackets as per Technical Specification complete in all respect.
1
-
-
PAS- SITC of 6W Recessed Ceining speakers with following features:-Speaker Drive 6", Complete Aluminium grille and Metal baffle, line matching transformer 100/70V line. Variable wattage tappings of 6 / 3 / 1.5, Effective frequency range 110-15kHz (BS6840), SPL@1m/1W=91dB, Peak SPL 97dB complete with necessary mounting hardware & accesories.
20
-
-
Supply and fixing of Ceiling/Surface mount MS Enclosure for above speaker
20
-
-
Supply, Installation,Testing & Commissioning of Digital Voice Evacuation system for 6 Zones expandable to 96 Zones. The System shall meet the standards of BS EN54 - 32 & EN 60849. The System Shall have Built in 500W Class-D Amplifier and it should be capable for the EVAC, Paging, PA and BGM functions. The Controller shall have SD card option to store the EVAC and Alert Voice Message. The Controller shall have Speaker line supervision and amplifier auto changeover. The Controller shall have following features: Seperate Zone volume control at the front side of panel, Status indications on the Panel for EVAC,Fault ,AC,DC ,Fault,ALERT & Fireman mic, Zone capacity up to 96 Zones, 8 programmable Control Input and output, Fireman Microphone with High Priority, THD1%, Frequency response 80Hz - 20kHz, Up to 1000 Record files, 100V Class-AB Speaker Output.
1
-
-
SITC of Remote Paging microphone with minimum 12 buttons and Busy/Hole Indication. The Microphone Should be suitable for Desktop mounting.
1
-
-
Supply Installation testing and comisioning of Professional CD/DVD player with USB flash port & 19" Rack mount arrangement.
1
-
-
Supply Installation testing and comisioning Volume Controller .
13
-
-
Supply & Laying of 1.5 sq.mm. multistrand PVC sheathed Two Core Twin Twisted Speaker Cable in Exiting Conduit
200
-
-
LAN- Supplying & Fixing of Non- PCB based Information Outlet (I/O) RJ45, Tolless Termination TIA-568C Category-6, Termination of Catergory-6 UTP Cable, UL listed ,Shall conform to Category-6 as per the EIA/TIA-568C.2,Shall support network line speeds up to 1 Gbps, Shall have RJ-45 type connector with bend limiting and strain relief boot for securing IDC contacts from external forces and for maintaining the bend radius of the cable, Shall have minimum duraility of 950 or Above mating cycles and 200 termination cycles. Certified by independent labs like ETL/GHMT/3P for compliance to EIA/TIA-568C.2 complete in all respect.
20
-
-
Supplying & Fixing of Single Faceplate Shall be Dual Port (RJ45) square plate, dimension as per commercially available modular office furniture.Shall have spring shuttered front access for preventing ingress of dust,Shall be supplied with Gang Box of the same size by System Integrator complete in all respect.
20
-
-
Supplying & Fixing of UTP Jack Panel, loaded with 24 nos UTP ports for Non-PCB based IO Jacks (RJ45, TIA-568C Category-6, Shall have integrated bonding bar or other mechanism for grounding, Shall be loaded with individually replaceable 24 nos. Category-6 certification by Jacks complying with TIA-568.C.2 , Shall be having a 6 port module construction for better cable dressing at the rear, the jacks shall have RJ-45 type connector with bend limiting and strain relief boot for securing IDC contacts from external forces and for maintaining the bend radius of the cable complete in all respect.
2
-
-
Supplying of 4-pair Unshielded twisted pair with a cross filler (+), meeting Category 6 standards as per TIA-568C.2, The cable should be tested till 250 MHz , Shall be Fire-Retardant, Low-Smoke & Zero-Halogen as per IEC 60332-1, IEC 61034-2 & IEC 60754-1 respectively.
1100
-
-
Supplying & Fixing of Category 6, UTP patch cords shall be constructed of 24-27 AWG unshielded twisted pair stranded copper cable with an enhanced performance modular plug at each end. Patch cord cable shall be offered in multiple colored UTP cable for design flexibility with a clear strain relief boot on each modular plug. All patch cords shall be compatible with both T568A and T568B wiring schemes. UTP Cable will be 1.0 mtr. complete in all respect. Jacket - LSZH
20
-
-
Supplying & Fixing of Category 6 UTP patch cords shall be constructed of 24-27 AWG unshielded twisted pair stranded copper cable with an enhanced performance modular plug at each end. Patch cord cable shall be offered in multiple colored UTP cable for design flexibility with a clear strain relief boot on each modular plug. All patch cords shall be compatible with both T568A and T568B wiring schemes. Blue UTP Cable, 2 Meter complete in all respect. Jacket -LSZH .
12
-
-
Supplying & Fixing of Fiber Optic LC style fully loaded Patch Panel (FOPP), 19" Rack Mount ,Shall have all accessories including coupler plates pre loaded with 24 Nos of LC couplers (OM3) with all accessories complete in all respect. Pigtails Should Complie to ITU-G657.B-Bend insestive fiber.
1
-
-
Supplying & Fixing of Fiber Optic Patch Cable (LC-LC), 3 Mtrs. Long, ISO/IEC-11801-OM3 50μ Duplex, LSZH,All patch cords shall conform to EIA/TIA-568C.3 and ISO/IEC-11801,Shall be Duplex Multi Mode Fiber Optic Patch Cords OM3 50μ,Shall support network line speeds up to 10 Gbps.Shall have LC-LC Connector connectors at the ends complete in all respect.
1
-
-
Supply & Fixing of OM3 50/125μ Type Pigtails of ISO/IEC-11801-OM3 Pigtails with LC Type Connectors,pigtails for terminating fibers on the FOPP complete in all respect.
4
-
-
Supplying, Installation, Testing & Commissioning of 50μ, 6-core Multi mode OM3 metallic armored Fiber cable as per ISO/IEC-11801, Shall be able to meet Gigabit & 10 Gigabit Ethernet performance up to 300 meters requirement specified by IEEE 802.3z (1000 Base-X) & IEEE 802.3ae (10G Base-X) Tensile load should be 4000 Newton or higher and crush resistance should be 4000 Newton or higher ,The attenuation @ 850 nm should be ≤ 2.7 (Max) db/Km and @ 1300 nm should be ≤ 0.7 (Max) dB/Km, the fiber construction can be unitube or multitube, but tensile and crush resistance parameters should be matched, the jacket shall be FRLSZH complete in all respect.
10
-
-
Supplying Installation testing and Commissioning of 24 port 10/100/1000BASE-T ports and four GbE/10GbE SFP/SFP+ uplink ports, layer 3 from day1 having static & RIP ,stackable upto 10 switches, , each switch should be provided with stacking port/cable complete in all respect .
1
-
-
Supplying Installation testing and Commissioning of Small Form Factor Pluggable 1 Gigabit Ethernet (SFP+) SR Optics
1
-
-
Supplying & Fixing of Floor Standing Network Rack - 22U / 600w / 800d, with Heavy Duty Extruded Aluminium Frame for rigidity. Top cover with FHU provision. Top & Bottom cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs. With a Overall Weight Carrying Capicity of 500Kgs. Side Panels - 22U/800d Front MS Door perforated honeycomb 22U/600w Rear MS Door (Fully Perforated - Mesh) 22U/600w Fan 90CFM 230V AC, 4” dia Castors with Brake (set of 4) Cable manager 1U MS with Loops Shelf, Stationery 475mm N/W PDU 7Sockets 5Amps with MCB Mounting Hardware (Pkt. Of 20) Vertical Cable Channel 50mmW 22U complete in all respect.
1
-
-
SITC of 8 (554kg) passenger elevator (machine room less) as per specification shown below Designation of Lifts-Passenger Lift – Gearless, Type and Capacity- 8 Passenger , Speed- 1 M/Sec (min), Drive- V3F (Variable Voltage Variable Frequency), Travel- 7.2 Mtrs. (Approx.), Serving- Ground , First & Second, No. Of Stops- 3, Required Well Size- 1900mm x 1900mm, Power Supply- 415 V Three Phase 50 Cycles Ac, Auxiliary- Single Phase 220v 50 Cycles Ac, Car size- 1300mm X 1100mm, Pit Depth- 1500 mm, Head Room- 4500, CAR ENCLOSURE, Car Ceiling- SS Hairline Finish Ceiling with Fan, Car Panels- SS Hairline Finish Panels , Car Flooring- Granite Flooring or Flooring by Client (20mm Recess with extra weight of max 75 Kgs. will be provided), Car Illumination- LED Lights, No. Of Entrance- One Location Front, Car Entrance- Centre Opening Power Doors in SS Hairline Finish, Door Safety- Full Height Infra Red Curtain, Landing Entrance- Centre Opening Power Doors in SS Hairline Finish, Clear Opening- 1000mm (W) X 2100mm (H), Control- Full Collective Simplex, INDICATORS- Car-KDS300 COP-PH Seven Segment Red Display
with Round Surface Mounted Buttons, Landing-KDS300 LCI Seven Segment Red Display with Round Surface Mounted Buttons, Cost shall be inclusive of following features/ facilities in the lift, Emergency Light and Alarm, Emergency Stop Button,Fireman's Control SwitchAuto Circuit Light & Fan Door Open and Close Button Non-Stop Button Auto-Attendant switch Over Load Service Automatic Rescue Device with batteries, Provision for Intercom, COP and LOP, Full Height Infrared Curtain, Pit Ladder.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements