Public Works Department Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 53,94,500Document Cost
₹ 20,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_PWD_12174_1Bid Award Id
ViewTender No
E TENDER 85 OF PW RnB DIVISION SANKOO 2023-24Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
supply and filling in plinth with local sand under floors, incld. watering ramming consolidating and dressing complete
240
216000
900
... More
Extra for every additional lift of 1.5 m or part thereof in excavtion /banking excavated of stacked materails All kinds of soil (depth 1.50-3.00)
206
22866
111
... More
ORDINARY ROCK (1.50-3.00)
10
2000
200
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorophriphos/Lindane emulsifiable concentrate of 20%
298
65560
220
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitermite treatment.Along external wall where the apron is not provided using chemical emulsion (Chlorophriphos/ Lindane E.C. 20% with 1% concentration) @ 7.5 litres/sqm of the vertical surface of the sub-structure to a depth of 300 mm including excavation of channel along the wall & rodding etc. complete:
287
8610
30
... More
Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor:
1714
395934
231
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil pipes cables, etc not exceeding 80 mm dia
25
6100
244
... More
Pipe , cables etc. exceeding 80 mm dia , but not exceeding 300 mm dia
25
9975
399
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incld. all carraige complete
495
2762100
5580
... More
Providing and laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
67
30150
450
... More
Providing and mixing water proffing materail in cement concrete work doses by weight of cement as per manufactures specification (1 kg of water proffing materails in 50 kg of cement
21
1428
68
... More
Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square meter on damp proof courses after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
67
10787
161
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete incld. all carraige complete
259
150220
580
... More
Centering & shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns etc. for mass concrete.
523
143825
275
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
275
138366
503.15
... More
Suspended floors, roofs, landings, balconies and access platforms.
6548
3647236
557
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
5364
2360160
440
... More
Columns, pillars, piers, abutments, posts and struts.
2292
1366032
596
... More
Edges of slabs and breaks in floors and walls
43
9116
212
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above:- Thermo-Mechanically Treated bars of grade Fe-500D or more.
455031
42772914
94
... More
Add for plaster drip course/groove in plastered surface or molding ot RCC projections
613
34328
56
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All work up to plinth level incld. all carraige complete
693
6167700
8900
... More
All work s above plinthlevel up to floor V level incld all carriage complete
1742
18116800
10400
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately.5.35.2 Providing M-30 grade concrete instead of M-25 grade RMC/RMC.
(Note : Cement content considered in M-30 is @ 340 kg/cum). incl. all carriage complete
22
2860
130
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately.5.35.2 Providing M-35 grade concrete instead of M-25 grade RMC/RMC.
(Note : Cement content considered in M-35 is @ 350 kg/cum). incl. all carriage complete
2182
589140
270
... More
Add or deduct ofr using more or less cement in the items of design mix over and above the specified cement content therein
153
122400
800
... More
Providing and fixing Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortor 1:4(1 cement :4 course sand) all carraige complete
38
456000
12000
... More
Extra brick work with common bunt slay bricks/cement concete bricks in superstructure abvoe plinth level up to floor five level
37
46250
1250
... More
Half Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortor 1:4(1 cement :4 course sand) all carraige complete
5
3750
750
... More
Extra half brick work with common bunt slay bricks/cement concete bricks in superstructure abvoe plinth level up to floor five level
5
650
130
... More
Extra f providing and laying in position 02 No 6 mm dia MS bars at every third course of half brick masonary
5
350
70
... More
Providing and laying autoclaved aerated cement blocks masonry with150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge.incld. all carraige complete and laying mix 1:6
1051
12612000
12000
... More
Extra for forming cavity 5 cm to 7.5 cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M.S. ties 300 mm long of 25mmx3 mm section at not less than 3 ties per sqm as per approved design.
2013
400587
199
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)all carriage complete
429
2571426
5994
... More
b) Granite of any colour or shade (Area of slab over 0.5 sqm)
20
80720
4036
... More
Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc.complete.
30
12900
430
... More
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
16
11408
713
... More
Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3kg/sqm including pointing in white cement with curing complete.18 mm thick Doongri Adanaga marble
25
62500
2500
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth.Granite Stone of approved shade
11
35200
3200
... More
Providing and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete.12 mm thick
10
14080
1408
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately):Red Sand Stone - Exposed face machine cut and table rubbed with rough backing 30 mm thick
1533
5748750
3750
... More
Providing and fixing cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement: 2 coarse sand) including making the necessary chases in stone and holes in walls wherever required.Gunmetal Cramps 25 x 6 mm - 30 cm long
4258
562056
132
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood
16
1649552
103097
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.First class kail wood
5
19500
3900
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.float glass panes 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm)
5
11500
2300
... More
Providing and fixing fiber glass reinforced plastic (FRP) door frames of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminates shall be 2 mm thick and shall be filled with suitable wooden block in all three legs. The frame shall be covered with fiber glass from all sides. MS stay shall be provided at the bottom to steady the frame
49
28910
590
... More
Providing and fixing 30 mm thick door shutters to existing door frames.Glass fiber reinforced plastic (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frames and suitable blocks of seasoned wood inside at required places for fixing or fittings, cast monolithically with 5mm thick FRP laminate for panels confirming to TADS 6 : 1993 and /or IS :14856-2000 including fixing to frames
16
48416
3026
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws
352
1161600
3300
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of doorshutter to be measured).
25
10000
400
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
25
2050
82
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
1572
223224
142
... More
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :
second class kail wood 50x20 mm
164
229600
1400
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: second class kail wood 50 x 20 mm
50
7000
140
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 250x10 mm :
164
32800
200
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300X16 mm
252
113400
450
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
328
65600
200
... More
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Twin rubber stopper
252
20160
80
... More
Providing and fixing aluminum tee channels (heavy duty) with rollers, stop end in pelmets as curtain rods.
190
26600
140
... More
Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge.
11841
5446860
460
... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimen ion in higher side shall be accepted but no extra payment on this account shall be made.
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
913
7851800
8600
... More
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
108
1231200
11400
... More
Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of Engineer-in-charge complete.
939
3756000
4000
... More
Supplying and fixing new wooden fillets wherever necessary : 2nd class teak wood filets
842
42100
50
... More
Providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete.1st class kail wood.
2146
257520
120
... More
Supply and fixing ornamental Ladaki SHINGTSAK upto 300mm width over door, window, etc. made by 2nd class silver kail wood or equivalent of size 100x75mm batterns fixing with screws Revit on base wall/ columns/ slab. Including polishing/ varnishing. Design of Shingtsak will be as per drawing issued by consultant/ sample approved by site-in-charge.standard size
1205
10242500
8500
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
85440
12388800
145
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and
similar works
527
73780
140
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube
520
88400
170
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
515
1648000
3200
... More
Extra for pre finished nosing to treads of steps of marble stone
438
212430
485
... More
Providing and fixing Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :
261
495900
1900
... More
Providing and fixing Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.
25
55000
2200
... More
Providing and fixing Wooden planking, tongued and grooved in flooring including fixing with
iron screws complete:Second class deodar wood 25 mm thick
2612
8358400
3200
... More
Providing and laying rectified Glazed Ceramic floor tiles of size300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown size of tile 800x800 mm
326
423800
1300
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size of tile 800x800 mm
1037
1296250
1250
... More
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of tile 800x800 mm
2657
5048300
1900
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.Size of tile 800x800 mm
216
399600
1850
... More
Providing and fixing thermal insulation with Resin Bonded Fibre glasswool conforming to IS: 8183. Density 16 kg/m³, 50 mm thick, wrappedin 200G Virgin Polythene bags placed over existing galvanum sheet/ false ceiling and held in position by criss-crossing GI wire.
5112
1278000
250
... More
Kansal roof puff insulated panel 40kg/m3 dencity.
Insulated Roof Panels: The roof shall be constructed of 60 +30mm thick PUF insulation & density of 40+ 2 kg/m3laminated with Pre-coated GI outside and inside of Skin. The top sheet shall be0.50mm high ribbed in trapezoidal shape top and bottom sheet shall be .50mm Micro Ribbed Pre-Coated PPGI sheet. The top side of the roof panels shall have 30 mm crest at 250 mm center to center pitch with a flute for capillary action in full length on one side of the crest portion, so as to prevent the water leakages in the event of valley filled with water. The top edge of the panels shall have overlap joinery systems. The bottom edges of the panels shall have tongue and groove systems for a continuous engagement for the full length of the roof panels. The color of the top side sheet will preferably be off White of 18-20 microns Pure Polyester coating over 4-7 microns Primer on the top side and 5 microns of backer coat over the primer on the bottom side of the sheet. Make: JSW & Synergy
Colour – Off White
1045
2299000
2200
... More
Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineerin-charge.With Type N-Normal 50 mm thick
1507
452100
300
... More
CIELING
Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws Budloo/fir wood
4733
6862850
1450
... More
Providing and Fixing 15 mm thick densified tegular edged eco-friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main ’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on Perimetre wall angle pre-coated steel size (24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws@ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (Spin tone / Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanized steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’ , bottom exposed with 24 mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/m 0 KC
453
679500
1500
... More
Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per liter, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in- Charge.
1658
2404100
1450
... More
12 mm cement plaster mix : 1:6 (1 cement : 46 fine sand)
6329
1873384
296
... More
15mm Cement plaster on the rough side of single or half brick
wall of mix: 1:6 (1 cement : 46 fine sand)
6039
2053260
340
... More
18mm Cement plaster in two coats under layer 12mm thick cement plaster 1 : 5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1 : 6 (1 cement : 6 fine sand)
50
21500
430
... More
Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm
1022
183960
180
... More
Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
13266
1591920
120
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
717
179250
250
... More
Providing and applying Plaster of Paris putty of 2mm thickness overplastered surface to prepare the surface even and smooth complete.
14288
2571840
180
... More
Providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per National Building Code 2009 complete as per direction of Engineer-in-charge.
1022
245280
240
... More
Providing and fixing at all height wall panelling with phenolbonded Bamboo Mat board conforming to IS: 13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws all complete as per direction of Engineer-in-Charge.9mm thickness
3066
11644668
3798
... More
Providing and fixing chicken mesh over AAC blocks with fixing screws completein all respec in the direction of engineer-in-charge.
14288
571520
40
... More
Providing and laying water proofing treatment in sunken portion/flat roofs of WCs, bathroom, terrace etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
305
132675
435
... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incld. carriage complete
251
1882500
7500
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of selfhealing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm
1673
592242
354
... More
Neat Cement punning
248
17360
70
... More
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures as directed by Engineer-in-Charge and consisting of :
i) 1st layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the levelling course (levelling course to be paid separately). Joints sealed and grouted with
cement slurry mixed with water proofing compound.
ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with waterproofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
46
75900
1650
... More
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-Charge: Using rough kota stone.
69
113850
1650
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS : 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
108
45576
422
... More
Supplying and fixing C.I. cover without frame for manholes:560 mm diameter C.I. cover ( heavy duty) the weight of the cover to be not less than 108 kg
4
12000
3000
... More
Providing and fixing soil, waste and vent pipes :100 mm dia. Centrifugally cast (spun) iron S&S pipe as per IS:3989
2
1864
932
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw(35mm)
8
26832
3354
... More
Extra for providing and fixing flush doors with decorative veneering instead of non-decorative ISI marked flush door shutters conforming to ISI: 2202 (Part-I)
8
3600
450
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
8
656
82
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
12
1704
142
... More
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :
3
4200
1400
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:second class kail wood 50 x 12 mm
10
1400
140
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :250x10 mm
6
1080
180
... More
150x10 mm
2
320
160
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized transparent or dyed to required colour or shade with nuts and screws etc. complete :300X16 mm
3
1350
450
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm
1
200
200
... More
Providing and fixing brass ISI Marked anodized transparent of dyed to required colour and shade with necessary screw etc complete 125 mm
4
1000
250
... More
Providing and fixing brass ISI Marked anodized transparent of dyed to required colour and shade with necessary screw etc complete 100 mm
4
800
200
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
14
42000
3000
... More
Providing and fixing ball bearing for rolling shutter
4
1860
465
... More
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).
14
5404
386
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
6
22800
3800
... More
Poviding and fixing Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :
108
205200
1900
... More
Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
100
12000
120
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick
88
15840
180
... More
6MM CEMENT PLASTER
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
12
3240
270
... More
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
1382
193480
140
... More
Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x 60 cm of mix 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size), every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50 cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded steel wire fabric, painting, earth work in excavation and concrete to be paid for separately).
92
5520
60
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm
92
69000
750
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
1800
1800000
1000
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
54
473148
8762
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)For fixed portionPowder coated aluminum (minimum thickness of powder coated 50 microns)
28
14000
500
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)Powder coated aluminum (minimum thickness of powder coated 50 microns)
50
29000
580
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
6
8010
1335
... More
Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5mm width
19
1425
75
... More
Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations.
a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and
approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645
and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water
proofing compound conforming to IS 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs)
c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge.
113
153680
1360
... More
Providing and laying water proofing treatment in sunken portion/flat roofs of WCs, bathroom, terrace etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
113
58082
514
... More
COMPACT SUB-STATION (USS) (11/0.415KV) :
Design, fabrication, testing at works, delivery at site, installation and successful commissioning of 11KV, 18.4kA Compact Substation, outdoor mounted type, comprising following components including required interconnection with cable/ busbar and internal earthing connections complete as required and as per specifications.( enclosed with NIT Sr. 138 to 185)
1
2159136
2159136
... More
Constructing water tight brick masonry manhole with first class bricks in cement mortar 1:6 (1 cement :6 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
8
106144
13268
... More
Heavy duty of 600 mm internal diameter.
8
23736
2967
... More
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, Storing, Installation, Testing and Commissioning of Radiator Cooled DG sets of following capacity (250 KVA) compact packaged silent type, with Outdoor type Acoustic Enclosure to reduce the noise level as per requirements of central pollution control board, (72 db from 3 mtrs.) 415Volts, 3 phase, 50 Hz AC alternator coupled to diesel engine with Electronic Governer Suitable for Auto Load Sharing and Auto Synchronizing System (In Future) complete with all accessories, standard specifications tool kits, service manual, self starting device, fly wheel, coupling with guard, V velt, radiator, instrument panel (starting switch with key, Water Temperature indicator gauge, Lub OIl Pressure gauge, Lube oil temperature gauge, Battery Charging Ammeter, indicating lamp, hour counter etc.), hospital silencer, common bed plate, anti vibration isolation pads, extended cable termination box, grouting bolts, first charge of engine oil, gear oil, high speed diesel oil, 24 volt maintenance free chargeable battery set with Trickle/Boost Battery charger, interface card for BMS connectivity complete as required of rating 415 Volts, 3 phase, 50 Hz. AC alternator coupled to Diesel Engine complete with all accessories. NOC from concerned goverment authority for installation and operation of D.G. set shall be taken by contractor. As per the new CPCB standard.250 KVA D.G. Set with suitable capacity of day oil fuel Tank with following items
2
6099600
3049800
... More
Above 120 sqm mm and up to 400 sqm
60
28920
482
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCc /Hume /METAL pipe as required above 120 sqm mm and up to 40 sq mm
60
8040
134
... More
Supplying of 11 KV grade aluminium conductor, cross linked polyethylene (XLPE) insulated individual core screened, flat steel/strip armoured PVC sheathed cable complete as required.3 C x 185 Sq.mm, XLPE HT cable (Earthed)
120
102120
851
... More
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :185 sq. mm
4
46724
11681
... More
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 185 sq. mm
2
34332
17166
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching(75 cm deep) and refilling etc as required as approved by architect and complete in all respect.150 mm dia (FOR L.T.CABLE & COMMUNICATION CABLE)
1
598
598
... More
250 mm dia at 1000 mm depth(H.T..CABLE)
120
84120
701
... More
300 mm dia at 900 mm depth(L.T.CABLE)
80
68320
854
... More
Design, manufacture, supply, Loading/ Un-Loading, installation, testing and commissioning of Main LT Panel Cum Synchronizing Panel fabricated out of 2mm thick for structural members (Load bearing members) and 1.6mm thick for door and covers (Non load bearing members) CRCA sheet in cubicle compartmentalize free standing floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel 'T' irons and/ or flats wherever necessary, 16 gauge CRCA sheet steel shall be used for final distribution panels. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be (form-3b Construction) treated with all anticorrosive process before painting as per specifications with 2 coats of zinc chromate primer and final approved shade of enamelled paint. 2 Nos. earthing terminals shall be provided for all distribution panels. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system and with 15% spare space, lifting hooks shall also be provided in case of large panels. MV Panel described above ( Sr.No 276 to 337)
1
1092546
1092546
... More
CAPACTOR PANEL DESCRIBED ABOVE Sr. No 339.356
1
389298
389298
... More
1 No. 400A, TP+N MCCB (35KA) with inbuilt Thermal Magnatic based release for Over load, Short circuit & Earth Fault protection. One (1) Nos. 200 A 4P,MCCB 35KA (Micro-Controller based with all releases). (Slar System Incomer) with 200A 4P Contactor Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. MAIN LIGHTING & POWER FLOOR PANEL described above.(Sr.359 to 379). 1 Nos. B+C Type (SDP) with 125A 4P Fuse1 Nos. 18A TP MPCB (50KA)
1
351624
351624
... More
1 No. 63A, TP+N MCCB (25KA) with inbuilt Thermal Magnatic based release for Over load, Short circuit & Earth Fault protection. UPS Panel described above.(Sr.No 380 to 393).
1
182091
182091
... More
Two (2)63A TP+2N MCCB ISOLATOR Enclosure , connected as per SLD, to form a By-pass arrangement.
2
23120
11560
... More
PLUMBING PANEL described above.(SrNo. 395 to 411).
1
327765
327765
... More
MAIN ELEVATOR PANEL described above.(413 to 441).
1
169533
169533
... More
Supplying, receiving, storing, handling erecting, testing and commissioning of Outdoor feeder pillar type factory fabricated Double door distribution board 14 guage rust inhibited and backed enamel painted sheet steel and comprising of incoming MCB, outgoing MCBs', bus bar (copper),neutral bus bar , top & bottom detachable conduit entry plates, earthing terminals with bolts, grounting etc. complete as per specifications (Class of Protection IP- 55) as approved by architect and complete in all respect.
1
174556
174556
... More
MCB BEFORE CONTACTOR / WITHOUT TIMER -Feeder Pillar Panel described as above
2
655698
327849
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C
422
411450
975
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit,and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
634
529390
835
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
880
132000
150
... More
FOR LIGHTING CIRCUIT/ SUB MAIN WIRING 2x1.5 sq mm + 1x1.5 sq mm earth wire
2450
367500
150
... More
2x2.5 sq mm + 1x2.5 sq mm earth wire
1701
323190
190
... More
2x6 sq mm + 1x6 sq mm earth wire
200
60000
300
... More
2x10 sq mm + 1x10 sq mm earth wire
100
35000
350
... More
4 X 10sq.mm + 2 X 6 sq.mm earth wire
150
52500
350
... More
4 X 16sq.mm + 2 X 6 sq.mm earth wire.
200
162000
810
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.20mm dia
250
28750
115
... More
25mm dia
1020
132600
130
... More
32mm dia
380
60800
160
... More
40mm dia
100
24500
245
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
189
65205
345
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
306
130050
425
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing of 3 nos.20A 3PIN SP MOULDED SOCKET FOR WATER COOLER modular socket outlet and 20A amps modular switch, connection etc. as required.
9
4950
550
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
500
25
... More
Supply and fixing following size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 module (75mmX75mm)
10
2000
200
... More
3 Module (100mmX75mm)
320
70400
220
... More
6 Module (200mmX75mm)
36
9720
270
... More
8 Module (125mmX125mm)
22
7150
325
... More
12 Module (200mmX150mm)
6
2070
345
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
15
1125
75
... More
SUPPLYING AND FXING OF FOLLWONG WAY , SINGLE POLE AND NEUTRAL, SHEET STEEL MCB DISTRUBUTION BOARD 240 VOLT, ON SUURFACE RECESS COMPLETRE WITH TINNED COPPER US BAR, NEAUTRAL US BAR. EARTYH BAR, INTERCONNECTION , POWDER PAINTED INCLUDING ETTC COMPLETE. 8 way, Double door
1
1450
1450
... More
12 way, Double door
3
5070
1690
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door
4
15160
3790
... More
12 way (4 + 36), Double door
12
67620
5635
... More
Supplying and finishing 5 amps to 32 amps rating, 240 volts 'C' series, miniature circuit breaker suitable for inductive and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
526
86264
164
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
15
105
7
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A
15
18375
1225
... More
63 A
39
84903
2177
... More
Supplying and fixing following rating, 'C' series, four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
4
8660
2165
... More
63 amps
15
34290
2286
... More
Supplying and fixing following rating, 'C' series, Double pole, 240 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
3
3435
1145
... More
63 amps
3
3705
1235
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
16
176
11
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required. 8 way, Double door
1
603
603
... More
12 way, Double door
3
2235
745
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required. 8 way Double door
4
4080
1020
... More
12 way Double door
3
3360
1120
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Above 185 sq. mm and upto 400 sq. mm
302
52850
175
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm
434
13020
30
... More
Above 35 sq. mm and upto 95 sq. mm
160
7520
47
... More
Above 95 sq. mm and upto 185 sq. mm
105
6720
64
... More
Above 185 sq. mm and upto 400 sq. mm
454
49940
110
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
10
570
57
... More
Above 35 sq. mm and up to 95 sq.mm (clamped with 25x3 mm MS Flat clamp)
70
5250
75
... More
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
164
15580
95
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
50
7500
150
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 4 X 35 sq. mm (32mm)
8
2432
304
... More
3½ X 95 sq. mm (45 mm)
2
970
485
... More
3½ X 120 sq. mm (45 mm)
4
2020
505
... More
3½ X 240 sq. mm (62mm)
4
3380
845
... More
3½ X 300 sq. mm (70 mm)
22
21670
985
... More
4 X 10 sq. mm (25 mm)
24
5280
220
... More
4 X 16 sq. mm (28mm)
10
2550
255
... More
4 X 25 sq. mm (28mm)
6
1560
260
... More
4C X 6 Sq.mm
20
4400
220
... More
4C X 4 Sq.mm
4
592
148
... More
4C X 2.5 Sq.mm
2
148
74
... More
3C x 10 Sqmm
8
1696
212
... More
3C x 6 Sqmm
2
340
170
... More
3C x 4 Sqmm
18
2430
135
... More
3C x 2.5 Sqmm
4
440
110
... More
Supply, loading, transportation unloading at site, storages at site, shifting from storage place to site of following sizes of XLPE insulated PVC sheathed, FRLS, Aluminium/Copper conductor armoured power cable of 1.1 KV grade conforming to IS amended upto date and as per specifications. 3.5C x 300 Sq.mm. Aluminium conductor
609
971355
1595
... More
3.5C x 240 Sq.mm
147
191835
1305
... More
3.5 C x 120 Sq.mm
63
43092
684
... More
3.5 C x 95 Sq.mm
42
23310
555
... More
4 C x 35 Sq.mm
200
55400
277
... More
4C X 25 Sq.mm
217
45570
210
... More
4C X 10 Sq.mm
326
38794
119
... More
4C X 16 Sq.mm
473
415294
878
... More
4C X 10 Sq.mm
175
105000
600
... More
4C X 6 Sq.mm
398
145270
365
... More
4C X 4 Sq.mm
105
26775
255
... More
4C X 2.5 Sq.mm
32
5824
182
... More
3C x 10 Sqmm
63
28665
455
... More
3C x 6 Sqmm
42
11760
280
... More
3C x 4 Sqmm
215
44075
205
... More
3C x 2.5 Sqmm
32
4640
145
... More
Supplying and laying of following 1100 volts grade PVC insulated sheathed copper conductor armoured control cables in existing trenches cables trays, clamped on wall with suitable saddles, fixing bolts, including testing and commissioning. 2 core 2.5 Sq.mm PVC insulated copper conductor armoured control cables
60
6780
113
... More
4 core 2.5 Sq.mm PVC insulated copper conductor armoured control cables
215
38700
180
... More
4 core 1.5 Sq.mm PVC insulated copper conductor armoured control cables
84
12432
148
... More
10 core 2.5 Sq.mm PVC insulated copper conductor armoured control cables
65
27430
422
... More
12 core 2.5 Sq.mm PVC insulated copper conductor armoured control cables
130
63310
487
... More
Supplying of all materials and making terminations of control cable terminations for control cables above item complete with single brass compression glands, copper lugs etc. as required. 2 Core x 2.5 Sq.mm Cable
4
1140
285
... More
4 Core x 2.5 Sq.mm Cable
10
3500
350
... More
4 Core x 1.5 Sq.mm Cable
4
1264
316
... More
10 Core x 2.5 Sq.mm Cable
4
1660
415
... More
12 Core x 2.5 Sq.mm Cable
8
4800
600
... More
COPPER FLEXIBLE CABLES FOR UPS & EARTH 1CX16 sq mm PVC cu flexible cable
221
20995
95
... More
1CX6 sq mm PVC cu flexible cable
819
38493
47
... More
1CX4 sq mm PVC cu flexible cable
254
7620
30
... More
1CX2.5 sq mm PVC cu flexible cable
32
704
22
... More
1CX1.5 sq mm PVC cu flexible cable
32
416
13
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width x 50 mm depth x 1.6 mm thickness
70
30450
435
... More
300 mm width X 50 mm depth X 1.6 mm thickness
150
73500
490
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width x 50 mm depth x 1.6 mm thickness
7
5460
780
... More
300 mm width X 50 mm depth X 1.6 mm thickness
15
16575
1105
... More
150 mm width x 50 mm depth x 1.6 mm thickness
7
6160
880
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness
15
19050
1270
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 150 mm width x 50 mm depth x 1.6 mm thickness
7
7350
1050
... More
300 mm width X 50 mm depth X 1.6 mm thickness
10
18050
1805
... More
EARTHING SYSTEM Earthing with G.I. earth plate 600mm x 600mm x 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
34
174250
5125
... More
Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required.
14
136150
9725
... More
50 x 6 mm GI Strip
74
18130
245
... More
40 x 6 mm GI Strip
200
39200
196
... More
40 x 6 mm CU Strip
74
142450
1925
... More
Providing and fixing earth bus of 25 mm X 5 mm GI strip on surface for connections etc. as required.
120
20400
170
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
180
151200
840
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
200
6000
30
... More
SITC of Roof Conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi & Complied as per Standard EN 62561-2.
460
68080
148
... More
SITC of Conductor holder for Parapet wall/Side wall of Material- StSt, for Rd 8-10 mm Fl 20 mm, Height- 20 mm & Complied as per Standard EN 62561-4. With accessories Screw and Gitty, Material SS (M5 x 50mm)
460
185840
404
... More
SITC of Glue Adhesive to fix the clamp without puncturing the shade
5
30900
6180
... More
Expansion piece for temperature related length compensation of longer conductors at every 20-meter distance. Material- Al & Complied as per Standard EN 62561.
23
6647
289
... More
Clamp for Expansion Pieces, Material- Al, with clamping range- 8-10mm & Complied as per Standard EN 62561.
46
6808
148
... More
SITC of Down Conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi & Complied as per Standard EN 62561-2,
250
37000
148
... More
SITC of Conductor holder for Parapet wall/Side wall of Material- StSt, for Rd 8-10 mm Fl 20 mm, Height- 20 mm & Complied as per Standard EN 62561-4. With accessories Screw and Gitty, Material SS (M5 x 50mm)
250
101000
404
... More
SITC of Lightning strike counter for digitally recording impulse currents The counter is preferably installed on the down conductors of the lightning protection system or between the equipotential bonding bar and the earth-termination system. Operating current (8/20 µs): 1 kA Max. discharge current (10/350 µs): 100 kA
Clamping range Rd: 8-10 mm Clamping range Fl: max. 30 mm Degree of protection: IP 65
1
37100
37100
... More
SITC of UNI Disconnecting Clamps with intermediate plate for round and flat conductor of Material- StSt, Material thickness- 2.5 mm, with clamping range- Rd / Fl 8-10 / 30 mm, & Complied as per Standard EN 62561-1.,
18
7578
421
... More
SITC of GI flat (25x6mm) Strip. Having width- 25mm, Thickness- 6mm, Material- Hot dipped Galvanized Iron, Cross Section- 150mm2, & Complied as per IEC 62561-2.,
60
18720
312
... More
GI strip holder of material- Dow moulded compound, having height- 19mm, Slot Size- 25x6 mm.
36
5580
155
... More
SITC of Copper bonded rod with Low carbon steel, high tensile strength copper bonded rod with min 254 microns of copper plating, UL listed with company name marked on rod. Diameter- 17.2 mm, Length- 3 meters, Material- Copper Bonded, Coating thickness- 250 microns, min, Approvals- Tested acc. IEC / EN 62561-2, UL 467.,
18
234
13
... More
SITC of 20 kg backfilled compound, - Material Carbon based backfill/earthing compound, Fulgurite formation test at direct lightning (10/350 μs), lightning long duration test at- 100C No fulgurites/Pass, Environmentally Friendly ROHS certified, Resistivity- 0.12 ΩM, Complying Standard- IEC 62561-7 , Testing Approvals Certified from- NABL accredited Laboratories.
18
270
15
... More
SITC of GI flat (25x6mm) Strip. Having width- 25mm, Thickness- 6mm, Material- Hot dipped Galvanized Iron, Cross Section- 150mm2, & Complied as per IEC 62561-2.,
310
96720
312
... More
LED recessed luminaire Zen22 SM with LED(Light Emitting Diode) maximum system power: 25W, Luminous flux of luminaire 3500 lm, 140 Lm/w, colour temperature of 4000K, neutral white, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, CRI80, R90, THD5%, P.F0.95, Driver Efficiency88%, SDCM3, electronic control gear, direct light emission, sheet metal CRCA housing, polyester white powder coat applied over a 5-stage pre-treatment, Prismatic diffuser for glare-free uniform light distribution, UGR19, Protection class I, IP40, surge protection of 2.5kV, L = 595mm, B = 595mm, H = 70mm
370
1465200
3960
... More
Deep Recessed downlight luminaire Blaire with HPE (High-Performance Efficiency) LED (Light Emitting Diode) maximum system power: 15 W, minimum Luminous flux of luminaire 1650 lm, 110 Lm/w, Colour temperature of 4000 K, Neutral white, CRI 80, R90, THD5%, P.F0.95, Driver Efficiency88%, SDCM3, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire housing in aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment, deep recessed Prismatic diffuser for homogenous light distribution, UGR19, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, Electronic control gear, Protection class II, IP 20 Ø = 175 mm, DA(Ø) = 160 mm, H = 59 mm.
531
1031202
1942
... More
Pendant luminaire Slash S with HE-High Efficiency LED (Light Emitting Diode), maximum system power: 25W, minimum luminous flux of luminaire 2750 lm, 110 Lm/W, colour temperature of 4000K, CRI80, R90, THD5%, P.F0.95, Driver Efficiency88%, SDCM3, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, direct light emission, luminaire profile powder coated white, Prismatic diffuser for homogenous light distribution, Driver replacement from the top without opening the optical part, UGR19, ZHLS(ZERO HALOGEN LOW SMOKE) internal wiring, integral electronic control gear, Protection class I, IP40, L = 1175 mm, B = 52 mm, H = 64 mm, PH=1500mm.
40
197600
4940
... More
Pendant luminaire Ring with HPE (High Performance Efficiency) LED (Light Emitting Diode) maximum system power: 60 W, minimum Luminous flux of luminaire 6000 lm, Colour temperature of 4000 K, Neutral white, CRI 80, SDCM3 , R90 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire profile in aluminium, Polyester powder black coloured coat applied over a 5- stage pre-treatment, Prismatic diffuser for a homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Protection class I, IP20, Ø = 980 mm, W = 100 mm, H =67 mm, PL = 1500 mm
9
499770
55530
... More
Surface Mounted luminaire Tube with HPE (High-Performance Efficiency) LED (Light Emitting Diode) maximum systempower: 9 W,minimum Luminous flux of luminaire 900 lm, Colour temperature of 4000 K, Neutral white, CRI 80, R90 230 Vconstant current driver, 70 % of luminous flux after 50,000 operating hours, Energy-efficient LEDs, Direct light emission,Luminaire profile in aluminium, Polyester powder whitecoloured coat applied over a 5- stage pre-treatment, snap-fitsatin diffuser for homogenous light distribution, ZHLS (ZEROHALOGEN LOW SMOKE) internal wiring, Electronic controlgear,Protection class I, IP 40, MacAdam 3, T.H.D ≤ 10%, driverefficiency ≥ 88%, surge protection of 2.5 kV, PF = 0.95
53
34291
647
... More
Wall Mounted luminaire Bulkhead with HPE (High-Performance Efficiency) LED (Light Emitting Diode) system power: 10W, Luminous flux of luminaire 800 lm, Colour temperature of 4000 K, Neutral white, CRI 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire housing in aluminium, Polyester powder grey coloured coat applied over a 5- stage pre-treatment, Opal diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Protection class II, IP 65, L = 215 mm, B = 132 mm, H = 55 mm.
8
9960
1245
... More
Pendant luminaire Alcove Up Dn with LED (Light Emitting Diode), maximum system power 28 W ( 14 W Up, 14 W Dn), minimum luminous flux of luminaire 3360 lm, 120 Lm/w, CRI80, R90, THD5%, P.F0.95, Driver Efficiency88%, SDCM3, colour temperature of 4000 K, Neutral white, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy-efficient LEDs, luminaire profile in aluminium, Plastic moulded end caps, Polyester powder Aluminium white coloured coat applied over a 5- stage pre-treatment, Deep recessed high-efficiency glare-free snap-fit micro-prismatic diffuser for homogeneous light distribution, UGR19, ZHLS (Zero Halogen Low Smoke) internal wiring, integral electronic control gear, adjustable suspender, Protection class I, IP20, L = 1199 mm, B = 75 mm, H = 90 mm, PL max = 1500 mm.
18
142830
7935
... More
Supply of 60W LED Street Light delivering minimum system lumen of 7200 lm & the luminaire shall be with system efficacy ≥ 120 lm/W. Aluminium die cast powder coated & High purity PC lenses. The operating CCT shall be 5700K with CRI of ≥70. The luminaire shall be BIS Registered with electronic driver with input voltage range of 150-300V, IP 66, IK 10, 50000 Hrs LED life with L70 Criteria. The LED driver shall be easily available in India for repair and service. The LED shall be SMD type. The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacturer along with Photo Biological Safety Standard. 4KV internal surge protection in both Common Mode and Differential Mode.
25
168125
6725
... More
Supply of 45W LED Post Top Light delivering minimum system lumen of 4500 lm & the luminaire shall be with system efficacy ≥ 100 lm/W. Aluminium die cast powder coated & High purity PC lenses. The operating CCT shall be 5700K with CRI of ≥70. The luminaire shall be BIS Registered with electronic driver with input voltage range of 150-300V,IP 66,IK 07, 50000 Hrs LED life with L70 Criteria. The LED driver shall be easily available in India for repair and service. The LED shall be SMD type. The luminaire shall be with following certifiactions: LM79 & LM80 issued by LED manufacturer along with Photo Biological Safety Standard.
15
289650
19310
... More
Supply of 45W LED Gate Light delivering minimum system lumen of 4275 lm & the luminaire shall be with system efficacy ≥ 90 lm/W. Aluminium die cast powder coated housing with Acrylic diffuser. The operating CCT shall be 5700K with CRI of ≥70. The luminaire shall be BIS Registered with electronic driver with input voltage range of 150-270V,IP 65,IK 05, 50000 Hrs LED life with L70 Criteria. The LED driver shall be easily available in India for repair and service. The LED shall be SMD type. The luminaire shall be with following certifiactions: LM79 & LM80 issued by LED manufacturer along with Photo Biological Safety Standard.
4
53560
13390
... More
Supply of LED surface mounted tube light
12
5448
454
... More
300MM Dia Plastic Body Exhaust Fan
35
100975
2885
... More
1x20W LED WALL MOUNTED TUBE LIGHT
3
1779
593
... More
SUPPLY OF CEILING/PROPELLER TYPE EXHAUST FANS (WITH GRAVITY LOUVERS) / CABIN FAN. 450 mm dia 960 RPM exhaust fan
4
14840
3710
... More
ALARM SYSTEM (CONVENTIONAL) Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 4 Zone
1
21973
21973
... More
Supply, installation, testing and commissioning of Hooter Cum Strobe with all required accessories for mounting complete as required.
8
27952
3494
... More
Supply, installation, testing and commissioning of Manual Call Point complete as required.
8
30872
3859
... More
Supplying & laying of 2X1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required
144
20880
145
... More
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
100
5000
50
... More
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
144
20880
145
... More
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
20
1221200
61060
... More
Supplying, Installation , testing and commissioning of outdoor lighting with fabricated pole made of MS pipe ( medium class) complete with base plate, luminaire bracket arm bed concrete foundation in 1:3: 6 ratio (1cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) including excavation and refiling , painting of Poles with one coat of primer and two coats of approved synthetics enamel paint etc. as required as approved by architect and complete in all respect. Double arm decorative Pole (Apprx. Weight 85kg)
25
400000
16000
... More
4.0 meter, Mild steel decorative Pole for post top lantern (ISI marked) with 76.1mm O/D and 3.65 mm thickness and with 300 x 300 x6 mm thick base plate.
15
120000
8000
... More
Supplying and embedding following dia G.I.pipe (meduim class) inpole collar / foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 32 mm dia (for Cable entry to pole box.)
80
25920
324
... More
40 mm dia (for Gate light )
25
9200
368
... More
Supply and fixing of Thermoplastic type water proof pole mounting boxes of size 205 x 255 mm x 112 mm , with cover and Gasket with cablel entry knock outs, 4 way 20A connectors mounted inside box etc.as per design including mounting arrangements. (Box depth 112mm)
25
100000
4000
... More
15 KVA UPS.
1
472916
472916
... More
Providing, Fixing,testing and commissioning of Sanitary fixtures & CP fittings including all accessories (ISI- marked , sample to be approved from client). The contractor rates to include for supply all Sanitary fixtures & CP fittings including fixing/supporting accessories like WC pan connectors, nuts, bolts, screws, hangers,bottle traps, rubber buffers, CI or MS brackets, anchor fastners, sealents, washers, adhesives,Flanges, plumber's tape, white cement, masking tape (if required for protection),clamps,m.s angles for support etc which are required for the successful installation of the fixtures/fittings including the steel shuttering in a neat workman like manner to the satisfaction of Project Manager. Rates are inclusive of Providing ,fixing ,testing and commissioning of Sanitary fixtures & CP fittings with all accessories at all the heights, depths and locations within the project premises.Rates are inclusive of Providing ,fixing ,testing and commissioning for underslung plumbing system or embeded piping, including all clamps & hooks including their painting to complete the work.Mostly, all the toilets in the residencial units have been designed for under slung piping. W.C. pan with ISI marked white solid plastic seat and lid
44
243784
5540.55
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre &
post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable
brackets all as per manufacturers specification and direction of Engineer-in-charge.
20
140089
7004.45
... More
White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
48
218035
4542.4
... More
Providing, Fixing,testing and commissioning of 15 mm dia CP brass two way bib cock with flow 6 LPM (Litre per Minute) at 3.1 bar or 45 psi test pressure with C.P. wall flange of approved quality as approved by architect and complete in all respect.
44
43956
999
... More
Providing & fixing S.S. health faucet for ablution with 1.2 meter long PVC tube, hand shower, couplings, wall hook and other accessories of quality and make as approved by architect.
44
122672
2788
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
68
60265
886.25
... More
C.P. brass
32
21760
680
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore
272
20345
74.8
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
272
136095
500.35
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
12
1252
104.35
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
48
67735
1411.15
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
32
4681
146.3
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
32
19211
600.35
... More
Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes
782
401752
513.75
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge Internal work - Exposed on wall 20 mm nominal outer dia Pipes
855.6
278155
325.1
... More
(ii) 25 mm nominal outer dia Pipes
347.3
141889
408.55
... More
(III) 32 mm nominal outer dia Pipes
192.28
96322
500.95
... More
(IV)40 mm nominal outer dia Pipes
111.78
75378
674.35
... More
50 mm nominal outer dia Pipes
210.22
194873
927
... More
65 mm nominal outer dia Pipes
64.4
101552
1576.9
... More
80 mm nominal outer dia Pipes
11.5
22889
1990.4
... More
Providing and fixing insulation to Pipes with 50mm thick resin bonded preformed mineral wool pipe sections of density not less than 144 kg/cum. as per IS:9842 and applying 26g Aluminium sheet as cladding, properly rolled and grooved with joints sealed with a strap of roofing felt (type-III Grade-I conforming to IS:1322) complete with self tapping screws centre to centre distance of 150mm to close cladding joints. The pipes shall be painted with zinc chromate primer before applying insulation. 25mm nominal bore
1984.9
729450
367.5
... More
(ii)32mm nominal bore
192.28
80757
420
... More
(iii)40 mm nominal bore.
111.78
52827
472.6
... More
(iii)50 mm nominal bore
210.22
121402
577.5
... More
(IV) mm nominal bore
75.9
47817
630
... More
Providing and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) v32 mm dia, nominal bore
6
3539
589.9
... More
40 mm dia, nominal bore
12
8487
707.3
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore
14
5564
397.45
... More
25 mm nominal bore
19
7583
399.15
... More
BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified 80 nominal bore (ii)65 nominal bore
4
15284
3821
... More
(ii) nominal bore
8
27144
3393
... More
(IV)40 nominal bore
5
14175
2835
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
External wor 25mm dia
10
4179
417.95
... More
ii) 32 mm dia
10
4577
457.7
... More
(iii)40 mm dia
40
22334
558.35
... More
(iv) 50 mm dia
70
45794
654.2
... More
(v) 65 mm dia
220
169092
768.6
... More
Providing and fixing gun metal non- return valve of approved quality
(screwed end) : 32 mm nominal bore
2
1355
677.65
... More
(ii)40 mm nominal bore
1
805
805.05
... More
50 mm nominal bore
3
3520
1173.65
... More
65 mm nominal bore
3
6281
2093.8
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with
C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
3424
1712.15
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
40
30284
757.1
... More
50 to 80 mm nominal bore
50
75685
1513.7
... More
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
18
5469
303.85
... More
Providing and fixing brass stop cock of approved quality 15mm nominal bore
20
6077
303.85
... More
Providing, Fixing,testing and commissioning of Vertical Storage Water Heater (Geyser) with Flexi Pipe, 5 Star 6 Litre capacity
36
356004
9889
... More
Supply & Installation of SOVISY - SMC Panel Tank confirming to: IS 14399 (Part 1& 2): 1996 & IS 4249 :1967 (50mm Insulated )
3
1268700
422900
... More
Providing, fixing, jointing, testing and commissioning UPVC (Class B) Rain water downtake pipe conforming to IS:13592 cut to required lengths including all necessary fittings and specials.UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offsets and other specials. Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with cement solvent joint as per BIS / manufacturer. Cutting, chases / holes in floors / walls / slab and making good wherever required. (All major MS structure to hold the stack with fixing including anchor fasteners,sand, cement etc is included in this item). 110 mm dia
189
84407
446.6
... More
Providing, jointing, testing and fixing UPVC Soil, Waste & Vent system Class Bconforming to IS : 13592 and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials. Jointing shall be done with pushfit EPDM ring jointing technique in general. Solvent cement joints may be provided for fittings and specials which are not manufactured with pushfit rubber joints.Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection and also pipes may be laid / fixed in sunken floors, under slung from ceiling. The pipes laid in sunken floor shall be encased with not less than 75 mm thick cement concrete (1:2:4) all around.The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All major MS structure to hold the stack is included in this item) as approved by architect and complete in all respect. 110 OD Type B
657
304466
463.42
... More
Providing, fixing, jointing and testing UPVC soil, waste, vent pipework comprising UPVC pipe conforming to IS :4985-1983 of class 3 ( 6kg/cm2) as specified below and fittings (moulded as well as fabricated) like elbows, bends, reducers, threaded tail pieces, caps, suitable elbow with suitable extension piece for drain point and other specials jointing with cement solvent, chasing, cutting and making good the walls & floors pipes laid in floors shall be encased with 40 mm thick concrete all around, complete in all respects including testing of complete installation.(All major MS structure to hold the stack with fixing including anchor fasteners, sand, cement etc is included in this item) as approved by architect and complete in all respect. 40 mm dia 6 kg/cm2 (Class III )
69
15671
227.13
... More
50 mm dia 6 kg/cm2 (Class III )
52
12914
248.35
... More
Providing and fixing UPVC/SWR trap (P trap) of self cleaning design as per IS:13592 : 1992 complete including cost of cutting and making good the cutouts in walls and floors etc.including cutting and making good the walls and floors wherever required complete as approved by architect and complete in all respect. as approved by architect and complete in all respect. 110 mm inlet and 110 mm outlet
64
26042
406.91
... More
Providing and fixing floor drain made out of 110x63 mm OD uPVC. elbow connected to uPVC pipe complete as per direction of Project Manager as approved by architect and complete in all respect as approved by architect and complete in all respect.
22
2066
93.91
... More
Providing and fixing Inlet Fitting for Urinal trap, formed out of 110 mm PVC pipe with multiple side inlets formed with saddle pieces, suitable for 40, 50 and 63 mm dia side connections as per standard detail and support through galvanized steel support from slab or set in cement concrete mix 1:2:4 including cutting and making good the walls and floors wherever required as approved by architect and complete in all respect..
8
2362
295.35
... More
Size 100 mm X 100 mm
22
10313
468.8
... More
Providing and fixing P.V.C. WC connector (straight or bend type) with rubber lip ring. Including 110 mm dia PVC pipe / bend of required length and proper connection with M seal to C.I. pipe complete as required as approved by architect and complete in all respect..
44
8194
186.24
... More
Providing and fixing cleaning eye 110mm dia on horizontal UPVC soil & waste pipes of 300 mm long UPVC pipe with one plain end lead caulked in to the collar of UPVC pipe and the other end with flange which in covered by neoprene rubber gasket and blank flange, complete with nuts, bolts etc and hot dip galvanization after fabrication to the satisfaction of Project Manager as approved by architect and complete in all respect.. 100 mm dia
36
5325
147.93
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
4
1066
266.6
... More
DWC ID SN-8 & SN-4 Pipe(HDPE Black Pipe) with Coupler & Rubber Ring as per IS:16098(PART 2) 150 mm Dia
58
27671
477.1
... More
200 mm Dia
115
71058
617.9
... More
250 mm Dia
81
71466
882.3
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 150 mm Dia pipe sand fillin 200 mm Dia pipe sand filling
71
153445
2161.2
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. 100x100 mm size P type
11
26989
2453.55
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
116871
11687.1
... More
Extra for depth for manholes : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5-Size 90x80 cm
1
9744
9744.25
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, outside plastering with cement mortar 1:3(1 cement : 3 coarse sand), foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
7
83205
11886.45
... More
Domestic Transfer Pump Capacity : 121 LPM Each Pump (1 Working + 1 Standby) @ 45 M head. (location at UGT Plant room)
1
520351
520351
... More
Dom.Water Return Pump Capacity : 200LPM Each Pump (1 Working + 1 Standby) @ 45 M head. (location at Terrace)
2
69074
34537
... More
Supply, assembly, erection, testing and commissioning of pumping system comprising the following: as approved by architect and complete in all respect. Vertical/Horizontal centrifugal pumps (1 Working + 1 Stand-by) with mechanical seal, SS Volute casing and SS impeller connected to suitable capacity TEFC induction motor suitable for 415 ± 10 % volts, 3 phase, 50 cycles A.C. supply with 100 mm dia. pressure gauges including MS skid and mounting of the pumps on the skid. (Motor to be of the same make as the pump) Raw Water Filter Feed Pump : Capacity : 217 Each Pump (1 Working + 1 Standby) @ 30 M head. (location at UGT Plant room)
1
33838
33838
... More
Supply, installation, testing and commissioning of free standing vertical type electrical submersible pump sets of following capacity capable of domestic water supply in tube well, with water cooled electric motor for effective cooling, the wearing parts such as Impeller, shaft sleeve, pump casing etc. shall be C.I & Impeller bolt shall be AISI 316 and of adequate power for operation on 415+ 1 volts, 3 phase, 50 Hz AC electric supply including fixing of delivery pipe with a flanged outlet. The cost will include providing and fixing suitable standard electrical panel from the same manufacturer as the pump, including float type level controller for level control and for cyclic operation of pumps, all electrical cables including submersible cables of required length and making all necessary electrical connections, terminations etc complete in all respects. For tube well water supply Capacity : 242LPM Each Pump (1 Working) @ 195 M head (location in tube well).
1
428710
428710
... More
Pressure Tank
1
41897
41897
... More
Supply, assembly, erection, testing and commissioning of SS/CI submersible grinder type pumps, suitable to handle basement drainage having the following capacities, complete with 3 phase squirrel cage submersible motor of required HP for 415 ± 10% volts, 3 phase, 50 Hz. A.C. supply cooled by surrounding liquid, submersible cable upto main panel within the plant room, dry running preventor, G.I. guide pulling chain, all the necessary piping and accessories, valves, delivery header etc. as required complete in all respects. The rate will include electrical panel with cyclic operation as supplied by the manufacturers. The rate will also include a three level sensor, controller and level indication (low, mid and high) system with a sounder for high level. The pumps will start as follows: (a) At mid level pump 1 will start. (b) At high level pump2 will start and there will be a sounder alarm as approved by architect and complete in all respect. Capacity of 216 lpm against a total head of 20m (solid handling 20 mm) (Pump room drainage) (1 Working + 1 Stand by) (SS Body and SS Impeller and shaft)
1
201307
201307
... More
Supply, installation, testing & commissioning of vertical self supporting Dual Media Filter (DMF) fabricated from FRP as per IS : 2825, ASMI code, complete with pressure gauges at inlet & outlet, sample cock, PVC face piping with ABS multiport valves and all accessories, with initial charge of filter media for Dual media filter with multi grade quartz sand & anthracite, lining inside with PP and FRP wounded outside, testing and commissioning complete as approved by architect and complete in all respect.. Test pressure : 5.5 Kg/Sq.cm
2
899192
449596
... More
Supply, assembly, erection, testing & commissioning of vertical M.S. Activated Carbon filter fabricated from 6mm thick M.S plate shell and 8mm thick M.S. plate dished ends with 3mm non-toxic, non-leaching rubber lining (rubber lining to be tested for pin-holes by spark tester) inside complete with initial charge of filter media activated carbon, face piping (GI, C Class), diaphragm/ball/non-return valves, accessories, painting, testing and commissioning of any under drainage system as required, complete. (Tested to 10 kg/sq cm) as approved by architect and complete in all respect. test pressure 5.5 kg /sqm
2
973098
486549
... More
Supplying, installing, testing and commissioning electronic chlorine solution dosing system comprising of F.R.P/ chemical grade HDPE solution tank of 200 litres capacity electronic dosing pump of capacity 0-4 LPH against 4.5 Kg/Sq.cm dosing valves, flexible teflon tube pipes etc. complete for dosing of chlorine solution into water on line.
2
776016
388008
... More
Supplying, assembly, erection, testing and commissioning of magnetic level sensors and controllers, CPVC probe tube, PP actuating float and all other equipment required for the performance of the system to the satisfaction of the engineer in charge complete including providing and fixing wiring from control junction box near the UG tank to probes of required length, interconnection wiring between level controller and the concerned contactor in the starter panel as required. The level controller will perform the following functions as approved by architect and complete in all respect..
2
44344
22172
... More
Providing & fixing Electric control panel to open / close the solenoid valve at low / high water level through level controller in OH water tanks including wiring, level controller probes & other accessories as required to operate the system automatically, including providing motorized butterfly valves with weather proof enclosure valves of suitable size as approved by architect and complete in all respect..
1
12551
12551
... More
Painting with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and
manufacture
14.52
2779
191.4
... More
Supply, installation, testing and commissioning of tanker inlet connection complete with 80 mm dia GI inlet piping, hose inlet connection, MS cabinet enclosure (epoxy painted after fabrication), pad locking arrangement, inlet flexible hose complete with all necessary arrangementas approved by architect and complete in all respect..
1
34865
34865
... More
Providing & fixing C.I. 'Y' Strainer (screwed / flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flanges / union nuts, bolts & washers complete as required (on pump suction)as approved by architect and complete in all respect. 80 mm dia
2
8474
4237
... More
Providing and fixing M.S. puddle flanges (fabricated of 750 mm long pipe pieces) to R.C.C. water tanks wall / slab. The entire fitting shall be hot dipped galvanized (Flanges shall confirm to BS10 Table E) as approved by architect and complete in all respect.25 mm dia (Screwed ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe). .
5
4005
801
... More
40 mm dia (Screwed ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe).
4
4828
1207
... More
50 mm dia (Flanged ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe).
6
8502
1417
... More
65 mm dia (Flanged ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe).
5
8375
1675
... More
80 mm dia (Flanged ends MS plate 6 mm thick; 100 mm x 100 mm plus dia of pipe).
5
9545
1909
... More
Providing and fixing Expansion flexible bellows between existing puddle flange in water tank retaining wall and proposed puddle flanges as mentioned under item No. 3 above. The bellow flanges shall match with exiting puddle flanges at site as approved by architect and complete in all respect.50 mm dia
2
14644
7322
... More
65mm dia
2
17432
8716
... More
100 mm dia
4
14084
3521
... More
Providing, testing & commissioning of dial type pressure gauge with pressure scale of 0 to 15 kg / cm2. Provision of isolation cock suitable for pressure of 15 kg / cum2 shall be included in cost.
4
5580
1395
... More
Supply complete testing kit with all chemicals complete suitable for conducting test on water quality. The test kit shall be suitable to measure TDS, pH, Hardness, Iron content and other parameters (Make : Ion Exchange)as approved by architect and complete in all respect..
1
15341
15341
... More
Providing, fixing, testing and commissioning of Air Release Valves screwed ends with ball valve of approved brand of manufacture, with accessories etc., complete.25mm dia
1
1133
1133
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. Boulder
50
29602
592.05
... More
300mm dia
40
56652
1416.3
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.Rocky strata including Boulders
30
46851
1561.7
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.100 mm nominal size dia
100
55320
553.2
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.100 mm nominal size dia
20
11599
579.95
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
8.18
12100
1479.25
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc.,all as per requirement and direction of Engineer-in-charge.
12
11001
916.8
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm clamp
1
280
280.95
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp
1
1827
1827
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all
respects, as required: (Terrace Pump)
(a) Horizontal type, multistage, centrifugal, split casing
pump of cast iron body & bronze impeller with stainless
steel shaft, mechanical confirming to IS : 1520
b) Suitable HP squirell cage induction motor TEFC type
suitable for operation on 415 volts, 3 phase, 50 Hz, AC
supply with IP55 class of protection for enclosure,
horiziontal foot mounted type with Class-'F' insulation,
conforming to IS-325.
(c) M.S.fabricated common base plate, coupling, coupling
guard, foundation bolts etc.as required.
(d) Suitable cement concrete foundation duly plastered
and with anti vibration pads.
1
86203
86203
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
2
36488
18244
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel
8
49112
6139
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforminq to IS 636 (type-A) as required :Stainless Steel (Grade 304)
16
71168
4448
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.30 mm
8
69400
8675
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304)
1
6742
6742
... More
Supplying, installation, testing and commissioning of weather proof M.S cabinet size 700 mm x 600 mm x 300mm deep fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the followingas approved by architect and complete in all respect.The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade.
8
303576
37947
... More
MS Fire Hose Cabinet (750 X 600 X 300)mm, Fabricated from 16 Gauge MS Sheet, 5mm Thick Glass , Double Door with Locking Arrangement , powder coated (Make- Exflame) Rates are only for hose box
8
41424
5178
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25 mm dia
9.2
6844
744
... More
Providing and fixing in position G.I. vent with brass mosquito proof coupling and air filter including return bend, complete as required. The entire fitting shall be hot dip galvanizedas approved by architect and complete in all respect. 25 mm dia .
12
22620
1885
... More
100 mm dia
118
301490
2555
... More
150 mm dia
12
42888
3574
... More
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :50 mm dia
25
23175
927
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gasket conforming to IS 13095 of following sizes as required :50 mm dia
2
7568
3784
... More
80 mm dia
8
39856
4982
... More
100 mm dia
3
20001
6667
... More
150 mm dia
3
26880
8960
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia
1
11050
11050
... More
150 mm dia
1
17786
17786
... More
Supply, Installation, Testing and Commissioning of 100 mm dia Bourden type, Stainless Steel dial type Pressure Gauge including brass isolation valve and siphon pipe having calibration of 0-16 Kg / cm2 .as approved by architect and complete in all respect.. (MAKE:H-GURU / EQV.)
8
17160
2145
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 150 mm dia
2
22288
11144
... More
Supplying and fixing of Fire Man's axe with heavy insulated rubber as per standard conforming to IS 926as approved by architect and complete in all respect.(MAKE - ZOLOTO , SANT)
8
10128
1266
... More
Providing & fixing double flanged Metallic expansion with M.S. fixed flanges (PN-1.6) joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete as required as per specificationsas approved by architect and complete in all respect. (Make :- Electroflex / Eqv.)150 mm dia
2
20000
10000
... More
Supply, installation, testing and commissioning of ISI marked (IS:15683:2006) portable chemical fire extinguisher, water (gas pressure) type capacity 9 litres with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets as required as per specificationsas approved by architect and complete in all respect.(Make - Exflame)
16
107536
6721
... More
Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives nagpur 4.5 kg capacity cylinder all complete as per direction of site engineer incharge
16
79312
4957
... More
Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed conforming IS : 15683:2006as approved by architect and complete in all respect.(Make - Exflame) 4.5 kg capacity cylinder
8
10128
1266
... More
Supply,Installation, Testing and Commissioning of Air Cooled Modular type Reversible Heat pump of 100 KW Actual Heating capacity , comprsing of hermetic scroll compressor driven by suitable KW Sq.Cage induction motor complete with Shell and Tube Flooded type Evaporator duly insulated with one inch thick closed cell Nitrile rubber insulation material, Air cooled condenser made of copper tubes and aluminium fins, refrigerant piping, Refrigerant R134a and Oil (First Charge), Condenser fan with Fan motor, inter connecting copper piping with insulation on all mounted in heavy guage galvanized steel casing, duly poweder coated baked finishing suitable for outdoor installation.The microprocessor based control pannel completely factory wired comprising of all necessary operative and safety controls and sensors with LCD display panel. The motor shall be suitable for 415 +/- 10% volts, 3 phase , 50 Hz AC power supply with DOL Starter. The package chiller shall be BMS compatible including necessary interface card suitable for transferring data to BMS. Chiller shall be provided with victaulic coupling for water connection, complete as per detailed technical specifications ., Expansion Valve, Microprocessor based automatic and safety controls all mounted on a M.S. frame duly epoxy coated. The Unit shall be included with factory supplied Spring mounting vibrartion isolator arrangement.
3
418380
139460
... More
Supply, Installation, Testing & Commissioning of Chilled Water duty (Variable Speed) centrifugal Vertical inline split coupled (close coupled) pumps / EndSuction Back pull out type closed coupled with outside type mechnical seal, complete with motor, drain valves and other accessories (except suction and discharge shut off valves, suction strainer, discharge check valves and drain piping which are covered under separate item). Pumps shall have mechanical seal and CI casing & Leed free Bronze Impeller, SS Shaft. The pump motor shall be of IE-3(as per IEC 60034) class efficiency, TEFC Squirrel cage class -F insulation, suitable for 415 Volts ± 10%, 50 cycles, 3 phase power supply. The quoted price shall include cost of M.S supports for mounting both pump with motor & coupling guard etc.All external and exposed cast iron parts of pumps should have an epoxy-based coating made in a cathodic electro-deposition (CED) process or equivalent. Pump set shall be complete with thermal insulation same as chilled water pipes, aluminium cladding at suction and discharge Pumps shall be complete as per specifications and shall have operating parameters as given below. The internal components of pumps including mechanical seal shall be suitable to sustain a temperature of 122°F.The Pump sets shall be with antivibration arrangement for pumps as per specification.
2
672400
336200
... More
Supplying, installation, testing and commissioning of 100 KW electrical hot water generator complete with electrical panel, controls, immersion heaters and insulation etc. as per specification and requirements.Required RCC Foundation for positioning of Hot Water Generator (size shall be as per Manufacturer recommendation)
2
294000
147000
... More
Supply, Installation, Testing & Commissioning of factory fabricated Indoor Type Double Skinned air-handling unit horizontal type with fabricated out of extruded aluminium (1.6 mm thickness min.)section with 0.8 mm thick precoated galvanised sheet outside & 0.8 mm thick 180 GSM Galvanised Steel sheet inside with forward curved belt driven DIDW type Metallic construction in supply with fan section with fan motor with IE3 rating & suitable for 415+10%, 3 Phase, 50 Hz along, 4 RD cooling coil with coil section, prefilter (EU-4) section with non woven synthetic washable media of 10µ (micron) particle size with an efficiency -100 CFM/2.5 TR/8.75 Kw
6
664200
110700
... More
1200 CFM /3.0 TR /10.5 Kw
6
757200
126200
... More
600 CFM /1.5 TR /5.25 Kw
40
198280
4957
... More
Supply, Installation, Testing & commissioning of IAQ Monitor to remotely measure the levels of PM 2.5, VOCs, CO2, Temperature(In / Out), Humidity on a real time basis. The IAQ Monitor shall be capable of getting connected with Wi-Fi. The Monitor should be capable of sending the indoor air quality information on display Screen/Mobile/Browser as per Client's requirement. The Monitor should indicate the quality of air through changing the colours on the display screen as per the NAAQS standards and should meet the WELL building standards. This monitor should be a 3 tier architecture including sensor Hardware, secure cloud infrastructure, monitoring apps including dashboard, android/IOS. Quoted price shall be inclusive of all necessary arrangement as required to make the unit proper functional.
1
53300
53300
... More
Supply,installation,testing and commissining of direct driven Tube axial flow fans suitable for installing in any position in Horizontal or vertical with adjustable pitch blade, MS with powder double coated / High duty GSS long Casing, cast aluminium alloy impeller complete with TEFC Sq. Cage Induction type IE-3 motor suitable for 415 volts ± 10%, 50Hz ± 3 %, 4 Pole, three phase A.C supply of class "H" insulation motor's winding with support, mountings, vibration isolators, fire retardant flexible canvass connector 150 mm deep with 25 mm slack at Outlet etc..Motor shall be suitable for 250 °C temperature rated for 2 hours & shall be completely be accommodated inside the fan casing.The fans shall be as per specifications & tender drawing of following capacity: 4000 CFM / 15 mm Wg / 4 Pole / 1440 RPM - For Common corridor smoke extraction
8
39656
4957
... More
Manufacturer shall furnish AMCA Test Certificate for air performance along with fire test certificate (Latest) for each fan sourced from that particular factory. 7500 CFM/015 mm wg /4 pole/1440 RPM - for lift well presuirzation
2
132840
66420
... More
Supply, installation, testing and commissioning of Rectangular type Ducted Inline fans with motor complete with TEFC Sq. Cage Induction motor suitable for 220 volts ± 10%, 50Hz ± 3 %, single phase A.C supply of class "F" insulation with , mountings accessories in all respect with wiring upto power supply point & of following capacities:500 CFM / 15 mm WG St. Press. - For (Male & Female)Toilet exhaust
2
132840
66420
... More
Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 100 mm dia (32 mm thick inculation )
90
2199240
24436
... More
80 mm dia. (32 mm thick insulation)
15
27375
1825
... More
65 mm dia(32 mm thick insulation)
36
52956
1471
... More
50 mm dia(32 mm thick insulation)
130
165490
1273
... More
40 mm dia. (32 mm thick insulation)
90
92790
1031
... More
32 mm dia(19 mm thick insulation)
180
154440
858
... More
25 mm dia(19 mm thick insulation)
440
313280
712
... More
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. 100 mm
1
5444
5444
... More
80mm
4
15896
3974
... More
65 mm
6
22290
3715
... More
50 mm
8
27088
3386
... More
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. 100 mm
3
48918
16306
... More
NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified. 100 mm
2
10102
5051
... More
Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified. 100 mm
2
24086
12043
... More
Supply, Installation, Testing and Commissioning of following sizes electronic, self- alancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valve (PIDB) in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar Minimum. The modulating valves cost included with Digital Thermostat alongwith necessary wiring. 20 mm - For AHU
6
57774
9629
... More
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
10
9810
981
... More
Providing & fixing in position the mercury in glass industrial type thermometers.
10
8550
855
... More
Supply, Installation,testing & commissioning of Ball valves(full open port type) threaded type BSPT internal complete with heavy duty PN16 brass body, chrome plated brass ball etc.& as specified in standard specification 25 mm
13
19188
1476
... More
32 mm
8
14432
1804
... More
Supply, Installation,testing & commissioning of Ball valves(full open port type) threaded type BSPT internal complete with heavy duty PN16 forged brass body with strainer 3 mm perforation, chrome plated brass ball etc.& as specified in standard specification 25 mm
6
17712
2952
... More
32 mm
6
20664
3444
... More
Supply, installation, testing and commissioning of following items the above items shall be included with interlinked to each other as pe necessary wiring and controls GA drawing & technical Data sheets should be get approval before dispatch 400 Ltr Closed type EXPANSION TANK along with necessary accessories such as air vents,Safety Valves, with required Support etc. The tank shall be made out of MS-2062 with replaceable heavy duty butyl rubber bladder.
1
36900
36900
... More
Supply, instalation testing and commissioner of the auto air vent calve with cock or ball valve of follwong size 15 mm dia auto air vent valve
4
4756
1189
... More
25 mm dia auto air vent valve
2
2952
1476
... More
Supply & installation of Rigid UPVC piping complete with U trap, fittings, elbows, bends & supports on finish floor level and duly insulated with 6 mm thick closed cell Nitril rubber with factory laminated 7 mil glass cloth for as per given below pipe size. The joints shall be sealed with 50 mm x 1 mm thick self adhesive tape at the joints etc.as per specifications. 50 mm dia (Working pressure - 6Kg/cm2)
45
22500
500
... More
40 mm dia (Working pressure - 6Kg/cm2)
80
35360
442
... More
32 mm dia (Working pressure - 6Kg/cm2)
90
32400
360
... More
25 mm dia (Working pressure - 6Kg/cm2)
140
43540
311
... More
Supply, installation, balancing and commissioning of factory fabricated 120 GSM GSS sheet metal ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes,steel wire hangers etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 0.63 mm sheet
500
442500
885
... More
Thickness 0.80 mm sheet
40
41400
1035
... More
Supply, installation, balancing and commissioning of fabricated at site 120 GSM GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports/ steel wire rope hangers etc. as per approved drawings and specifications of following sheet thickness complete as required.Thickness 0.63 mm sheet
20
17340
867
... More
Thickness 0.80 mm sheet
20
20140
1007
... More
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.
6
34662
5777
... More
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
12
89592
7466
... More
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
15
72690
4846
... More
Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.
2
19980
9990
... More
Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.
2
13318
6659
... More
Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. Fire damper
7
61180
8740
... More
b) Actuator 10 Nm Torque with Control Panel
1
8157
8157
... More
Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. or anti-microbial Chemically cross linked polyethlyne foam of class"O"(XLPE)complete as required and as per specifications.
300
174000
580
... More
Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation or anti-microbial Chemically cross linked polyethlyne foam of class"O"(XLPE) with Aluminium PE foil complete as per specifications and as required. Joints shall be sealed with self adhesive tape. 19 mm
400
181600
454
... More
Supplying & fixing of Underdeck insulation on RCC slab ceiling with approved sample of Class "O" closed cell Nitrile Rubber Insulation with 25 mm Thickness & density 40-55 Kg/Cum .Thermal Conductivity not exceeding 0.035 W/mK at an average Temperature of 0°C. Material shall have fire performance acc. to BS 476 Part 7 & Part 6, water vapour diffusion resistance ( μ factor ) shall be greater than 7000 & tested from third party for the parameteres.Insulation material shall be factory laminated with Aluminium Foil.
1200
639600
533
... More
Supplying & fixing of 18 G thick Aluminium extruded powder coated Fresh / Exhaust air weather protected louvers with bird screen type i.e. louvers blade shall be at 45° inclination with blade pitch 40 mm (with Aluminium frames if required) for ventilation. as per specification and sizes will be as per tender drawing mentioned.
6
44880
7480
... More
Supply, Installation and Testing of of extruded aluminium powder coated Air Transfer Grilles to be provided at the door of toilets/pantry.
4
20008
5002
... More
Supply, Installation, testing & commissioning of Cubical type main MV panel board suitable for 3 phase, 415 volts, 50 Hz and of 50 KA rupturing capacity at 415 volts, fabricated from minimum 2 mm thick and doors of 1.6 mm thick CRCA sheet powder coated through seven tank process facility for prickling and degreasing complete with mountings, interconnections, earthing etc including mechanical and Electrical Inter locking as required.
1
18000
18000
... More
Supply, Installation, testing & commissioning of Cubical type main MV panel board suitable for 3 phase, 415 volts, 50 Hz and of 50 KA rupturing capacity at 415 volts, fabricated from minimum 2 mm thick and doors of 1.6 mm thick CRCA sheet powder coated through seven tank process facility for prickling and degreasing complete with mountings, interconnections, earthing etc including mechanical and Electrical Inter locking as required.
1
1110000
1110000
... More
Supply, Installation, testing & commissioning of Cubical type main MV panel board suitable for 3 phase, 415 volts, 50 Hz and of 50 KA rupturing capacity at 415 volts, fabricated from minimum 2 mm thick and doors of 1.6 mm thick CRCA sheet powder coated through seven tank process facility for prickling and degreasing complete with mountings, interconnections, earthing etc including mechanical and Electrical Inter locking as required.
12
300000
25000
... More
Supplying, laying, effecting proper termination, testing & commissioning of the following POWER CABLE sizes of 1.1 KV -PVC inner sheated,extruded PVC type ST2 sheathed & Galvanised steel strips/wire as per IS 7908 (Part-I) armoured aluminium conductor cables conforming to relevant latest amended Indian Standards with both side double compressed brass gland termination & aluminium lugs as per specification standard.3.5(3½) X 120 sq. mm
40
23600
590
... More
3.5(3½) x 70 Sq. mm
90
40590
451
... More
3C x 10 Sq. mm
25
4500
180
... More
3C x 6 Sq. mm -
90
13230
147
... More
3C x 4 Sq. mm
180
22140
123
... More
CONTROL CABLE ( PVC insulated & PVC sheathed, flexible, Copper Conductor of 1.1 KV grade on existing cable trays) with both side pvc end termination and aluminium lugs as per specification standard. . 4C X 1.5 Sq.mm
250
43000
172
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5(3½) X 120 sq. mm
12
6024
502
... More
3.5(3½) x 70 Sq. mm
8
3064
383
... More
3C x 10 Sq. mm
2
420
210
... More
3C x 6 Sq. mm
4
784
196
... More
3C x 4 Sq. mm
48
9408
196
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
110
22000
200
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
440
25080
57
... More
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width x 50 mm depth x 1.6 mm thickness
220
97900
445
... More
150 mm width x 50 mm depth x 1.6 mm thickness
90
44550
495
... More
200 mm width x 50 mm depth x 1.6 mm thickness
50
28200
564
... More
300 mm width x 50 mm depth x 1.6 mm thickness
40
25480
637
... More
450 mm width x 50 mm depth x 2.0 mm thickness
15
13845
923
... More
600 mm width x 62.5 mm depth x 2.0 mm thickness
5
5600
1120
... More
Providing and fixing of solar panel(250kWp) Grid-cpmsmect system solar PV System size -250 kWP High quality solar panel s mounted detatit of 5 degree and 18 degree horizontal lon life structure with galvanization coating module connector (MC4 compatible) male and female pairs-4In 1Out ACDB with following (metal body) -I/C-4 Nos(4P,125Amp, 415VMCCB)
-O/G-1Nos (4P, 500Amp, 415 VMCCB)
-multifunction display All as approved byarchitect and complete in all respect all other specifications and features are enclosed with NIT
1
14145000
14145000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements