Public Works Department Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 9,55,000Document Cost
₹ 4,000Tender Fee
Refer Documents
Summary
Construction Of Revenue Staff Quarter At Sumoor (12 Set)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_13002_6Bid Award Id
ViewTender No
12 of PWD RnB Nobra 2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
89.45
-
4869.32
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,
string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1.25
-
8309.42
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
36.34
-
410.76
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete.
116.64
-
288.97
Suspended floors, roofs, landings, balconies and access platform.
796.06
-
700.23
Shelves (cast-in-situ)
27.14
-
700.23
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
908.15
-
553.98
Columns, Pillars, Piers, Abutments, Posts and Struts
688.26
-
749.31
Stairs, (excluding landings) except spiral-staircases
89.1
-
889.61
Small lintels not exceeding 1.5 m clear span, mouldings as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
37.93
-
288.97
Edges of slabs and breaks in floors and walls under 20 cm wide
73.62
-
266.94
Steel Reinforcement for R.C.C. work including straightening ,cutting, bending, placing in position and binding all complete up to plinth level.Thermo-Mechanically Treated bars of grade Fe 500D or more
17575
-
94.02
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe 500D or more
52725
-
94.02
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
100
-
62.08
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge.Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level
95
-
7923.44
All works above plinth level upto floor V level
285
-
9317.3
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 ( 1 cement : 6 coarse sand)
27.08
-
4510.42
Providing and Constructing cement stabilized mud block masonry (mud block made out of soil containing 60% to 70% of sand and 10% of clay and 5% of cement pressed using manual machine) in cement mortar 1:4 in walls. The size of the block is 305x143x100 mm. laid in course cement mortar as per the direction of Engineer in-charge
305.82
-
7627.11
Providing and fixing solid wood designer cornice made out of wooden block of 600mmx200mm in desired profile as per detailed drawing including the cost of scaffolding, fixing arrangement like appropriate fastener and finishing the same with exterior grade transparent coating to the entire satisfaction of engineer incharge.
50
-
7627.11
Providing and fixing aluminium work for fixing aluminium louvers/ bands as per detail drawings with extruded built up standard tubular sections/ appropriate Z/T/C sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
1250
-
550
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour or shade(Area of slab over 0.5 sqm) 18mm
62.69
-
5055.88
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work
412.12
-
549.53
Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.
412.12
-
542.28
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
12
-
599.15
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
165.08
-
1338.24
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm
588.49
-
1883.89
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
588.49
-
291.54
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
6.2
-
10018.02
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
180.9
-
4546.58
Providing and laying matt finished heavy duty vitrified tile of size 300x300x9.8mm or more having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
148.5
-
1338.24
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
627.52
-
1337.6
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.Size of tile 600x600 mm
73.92
-
1947.26
Providing and laying Polished Granite stone dado in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 12 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
51.56
-
3813.56
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood.
5.09
-
93625.77
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35mm With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
164.64
-
2438.22
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:2nd class teak wood. 50 x 20 mm
199.95
-
268.72
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm
89
-
421.83
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 300x10 mm
89
-
195.84
150x10 mm
89
-
136.18
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm
89
-
112.45
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.Single rubber stopper
89
-
92.54
Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality.1mm thick
329.28
-
1149.87
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)
226.62
-
9238.53
Filling the gap in between aluminum frame and adjacent
RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5mm width
603.2
-
66.67
Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of Engineer-in-charge complete
226.62
-
5549.77
Providing and fixing circular/hexagonal cast iron box for ceiling fan clamp, of internal dia 140 mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamps shall be made of 12mm dia M.S. bar bent to
shape as per standard drawing.
48
-
199.32
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab
with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1684
-
826.84
10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat.With common burnt clay (non modular) brick tiles of class designation 10.0
196.69
-
718.05
Extra for every additional 1cm thickness of mud phaska.
196.69
-
15.93
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.
131.44
-
240.11
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
8
-
272.44
12 mm cement plaster of mix :1 : 4 ( 1 cement : 4 fine sand)
1630.43
-
286.49
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)
1630.43
-
331
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
1993.07
-
244.2
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
3623.5
-
164.2
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
250
-
182.6
Melamine polishing on wood work (one or more coats)
300.3
-
154.12
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
148.5
-
2430.88
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
9.45
-
9175.24
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).
Note: Cement content considered in this item is 303 kg/ cum
Excess/less cement used as per design mix is payable/recoverable separately
50.2
-
8696.17
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid,10 litre low level white vitreous china flushing cistern & CP flush bend with fittings & CI brackets,40mm flush bend,overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.W.C. pan with ISI Marked white solid plastic seat and lid.
24
-
5190.67
Providing and fixing wash basin with CI brackets,15mm C.P. brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings & brackets,cutting and making good the walls wherever required.White Vitreous china wash basin size 630x450 mm with a single 15mm CP brass pillar tap.
24
-
3174
Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.Kitchen sink with drain board. 510 X 1040 mm bowl depth 250mm
12
-
5091.9
Providing and fixing C.P.brass Single lever telephonic wall mixer of approved quality & make as approved by Engineer-in-charge.15 mm nominal bore.
24
-
5185.72
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete.Flexible pipe 40mm dia.
12
-
88.43
Providing and fixing mirror of superior glass (of approved quality) and of required shape & size with plastic moulded frame of approved make & shade with 6mm thick hard board backing. Rectangular shape 453 X 357 mm
24
-
982.16
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality & colour. 750x20mm size. 600mm long towel rail with total length of 645mm,width 78mm & effective height of 88mm,weighing not less than 190gms.
24
-
508.77
Providing and fixing brass bib cock of approved quality conforming to IS 8931.
12
-
554.87
Providing and fixing C.P.brass long body bib cock of approved quality conforming to IS standard and Weighing not less than 810 gms.
12
-
794.04
Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931
10
-
835.55
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
160
-
681.48
Providing and fixing C.P.brass extension nipple(size 15mmx50mm) of approved make and quality as per direction of Engineer-in -charge.
170
-
79.19
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
24
-
2806.27
Providing and fixing C.P.brass bottle trap 32mm size bottle trap of approved quality & make as approved by Engineer-in-charge.
24
-
751.06
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-charge at site.75mm outer dia
80
-
508.47
110mm outer dia
400
-
550.84
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required.40mm outer dia
90
-
280.5
50mm outer dia
90
-
332.2
63mm outer dia
60
-
503.38
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince).100 mm inlet and 100 mm outlet.( with 127dia Glossy CP Grating Jayna model no.RRB 127)
80
-
413.55
100 mm inlet and 75 mm outlet. (with 102 mm dia CP Glossy Grating Jayna model no. RRB 102)
4
-
454.24
Providing & fixing 110m x 50mm waste with PVC reducer including cutting chases in floor, cutting RCC slab complete as required.
78
-
327.97
Providing in position storage type hot water electrical geyser 25 litre ( vertical or horizontal-2.0 kw) including making connection in all respects.-Venus/Racold make.
36
-
12288.14
Providing & fixing Sink Mixer with Swinging Casted Spout (Wall Mounted Jaquar model CON-309 KN/approved equal) with 450mm long copper pipes & brass nuts.
12
-
4067.8
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal Work - exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 25 mm nominal outer dia pipes.
420
-
390.55
32 mm nominal outer dia pipes.
90
-
549.01
40 mm nominal outer dia pipes.
80
-
711.53
50 mm nominal outer dia pipes.
50
-
981.72
Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes.
800
-
585.38
External Work including trenching,refilling 25 mm nominal outer dia pipes.
35
-
338.22
32 mm nominal outer dia pipes.
40
-
443.65
40 mm nominal outer dia pipes.
40
-
588.02
Making connection of GI distribution branch with GI main of following sizes by providing and fixing tee,including cutting and threading the pipes etc, complete. 25 to 40mm nominal bore
2
-
734
Providing and fixing gunmetal gate valve with CI wheel of approved quality(screwed end). 25 mm dia nominal bore
95
-
691.33
32 mm dia nominal bore
18
-
785.34
40 mm dia nominal bore
12
-
895.8
Providing and fixing non return valve of approved quality(screwed end).25 mm dia nominal bore-vertical
2
-
647.47
32 mm dia nominal bore-vertical
4
-
1077.64
Providing and fixing P.V.C connection with brass union. 45cm length.15mm nominal bore
160
-
111.74
Providing and placing on terrace (at all floor levels) Polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement amd making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.and insulation of sintex with k flex ,nitryl rubber sheet,chicken mesh ,glass wool and aluminium sheet.
4500
-
33.9
Providing & fixing 6mm thick nitryl rubber,heat trap,K flex,chicken mesh,glass wool and aluminium sheet insulation on hot and cold water pipes-15 to 32 mm dia pipes burried inside walls a)
300
-
2288.13
Providing & fixing 12mm thick nitryl rubber,heat trap,K flex,chicken mesh,glass wool and aluminium sheet insulation on hot and cold water pipes-15 to 65 mm dia pipes burried inside walls a)
320
-
2542.37
Providing & fixing on wall face unplasticised -Ragid PVC rain water pipes conforming to IS ; 13592 Tyape A included jointing with seal ring conforning to IS ; 5382 leaving 10 mm gap for thermal expansion .a)110 mm diameter
100
-
451.02
Providing, fixing on wall face unplasticised - PVC moulded fittings /accessories for unplasticised - Rigid PVC rain water pipes conforming to IS ; 13592 Type A including jointing with seal ring conforming to IS ; 5382 leaving 10 mm gap for thermal expansion. a)Coupler-110mm diameter
24
-
215.47
b)Bend-87.5deg-110mm bend
8
-
226.27
c)Shoe-110mm shoe
8
-
159.34
Providing & fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1cement : 4 coarse sand) and making good the wall etc. complete. 110mm dia
50
-
387.71
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighting not less than 440 grams.
8
-
85.8
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 100mm diameter pipe
10
-
466.14
150 mm diameter pipe
5
-
830.53
200 mm diameter pipe
130
-
1051.78
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100mm diameter pipe
10
-
758
150 mm diameter pipe
15
-
927.07
200 mm diameter pipe
130
-
1080.7
250 mm diameter pipe
180
-
1249.7
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed ,within a lead of 50m. All kinds of soila.
400
-
243.09
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth,including consolidating each deposited layer by ramming,watering,etc. and disposing of surplus excavated soil as directed ,within a lead of 50m. Pipes. cables exceeding 80mm dia but not exceeding 300mm dia.
335
-
353.59
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
100
-
215.21
Providing and fixing square mouth SW gully trap class SP-1 complete with CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg. as per standard design.150x100mm size P type with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
1
-
2947.75
with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
10
-
2943.69
Providing and laying light duty non-pressure NP2 class R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 150 mm dia. R.C.C. pipe
10
-
573.43
250 mm dia. R.C.C. pipe
180
-
928.98
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :Withcommon burnt clay FPS (non modular)bricks of class designation 7.5.
16
-
27587.35
Extra for depth for manholes Size 120x90cm With common burnt clay FPS (non modular)bricks of class designation 7.5
9
-
11587.05
Providing and fixing in position pre-cast RCC manhole cover and frame of required shape & approved quality .MD-10Circular shape 500mm internal diameter
2
-
1266.36
Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design: Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating.
2
-
6341.89
Chamber size 45x45x77.50 cm including precast R.C.C grating with frame 450x100 mm vertical grating.
5
-
7158.5
Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design.
2
-
26306.94
Constructing R.C.C septic tank including associated works. a) Excavation ( in all types of soil ), back filling & disposal of surplus excavated earth as directed at site. b) 2nos. SFRC heavy duty manhole cover 600 mm dia with lifting lugs & frame. c) 150mm thick Foundation conc.1:2:4d) 12 mm thick 1:3 plastering on inside & rough plaster on outside.e) R.C.C top slab ( 1:2:4 ) Size 4x1.5x3.0m depth. Septic tank as described above
1
-
313559.32
Constructing soak pit(size-4.0m dia & 4.0m depth) as per detail drawing including following associated works. a) Brick chamber 600 x 600mm with dry joints. b) Brick aggregate filling inside soak pit. c) Excavation ( in all types of soil ), back filling & disposal of surplus earth as directed at site.d) 1no. SFRC heavy duty manhole cover 600mm dia with lifting lugs & frame. Cost include all associated civil works like excavation , back filling & disposal of surplus excavated earth as directed at site. Soak Pit as described above
1
-
127118.64
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A
284
-
860.17
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
40
-
1323.7
Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :-Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
2320
-
283.05
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.
1096
-
233.05
2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire.
980
-
372.03
2 x 10 sq.mm. + 1 x 6 sq.mm. Earth wire.
480
-
483.05
S/F light plug point Modular Type Accessories :-Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
84
-
404.23
S/F power plug point modular Type Accessories :-Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
116
-
496.6
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (AC)
36
-
616.1
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
12
-
83.89
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as Required. Single pole
208
-
216.94
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
2
-
11.02
Supplying and fixing following way, Single Pole and Neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 Way Double door.
2
-
2180.5
16 Way Double door.
12
-
2661.86
Supplying and fixing following Rating, Double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 40 Amps
14
-
368.64
Supplying and Fixing Following Size/ Modules, GI Box Alongwith Modular Base & Cover Plate for Modular Switches in Recess etc. as Required. 1 or 2 Module (75 mm x 75 mm)
72
-
252.54
Supplying and Fixing Following Modular Switch/ Socket on The Existing Modular plate & Switch Box including connections But Excluding Modular Plate etc. as required. Telephone Socket outlet.
30
-
125.43
TV Antenna socket outlet.
30
-
125.43
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm.
840
-
122.88
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, Unarmored Telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair.
600
-
32.2
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
450
-
39.83
Supply, Installing, Testing and commissioning Surface Mounted Energy Efficient, LED Luminaires 18W/ 20W LED DOWN LIGHT (Round), 6500k Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc.as required
20
-
1022.03
Supply, Installing, Testing and commissioning LED Luminaires Batten 20W LED Tube Light 6500k of surface mounting Aluminium housing and integrated electronic driver Complete as Required.
60
-
764.4
Supply Installation, Testing and commissioning of 9W LED BULB Suitable for B22 Base accessories Complete as required.
72
-
122.88
Supply, Installing, Testing and commissioning Surface Mounted Energy Efficient, LED Luminaires 12W LED Down Light (Round), 6500k Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc.as required.
52
-
776.27
Supply, Installing, Testing and commissioning LED Luminaires Batten 10W LED Tube Light 6500k of surface mounting Aluminium housing and integrated electronic driver Complete as Required. (Mirror Light)
24
-
511.02
Supply, Installing, Testing and commissioning Following sweep Exhaust fan with guard suitable operation on single phase 230 V, 50Hz. AC Supply, with louvers/shutters in the existing opening etc. Complete as required . 250 mm sweep 900 rpm (Make of ORIENT ELECTRIC 250mm Ventilator Ivory/ Similar to Crompton Ventilus 10" White/ Similar to Havells Ventil Air DX/ DX-HS/ Similar to USHA)
36
-
1830.5
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
72
-
76.27
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
48
-
2313.55
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.
48
-
245.97
SITC of cubicle type compartmentalized meter panel board directly on wall cum Floor mounted made out of 2 mm thick CRCA sheet duly powder painted and suitable for fixing following energy meters and following MCB having 20 mm thick wooden plate in the bottom of energy meter and glass in front, of 100mm x 100mm for meter reading in each compartment 4 strip vertical Al. Busbar of 500 amp capacity , din rail for MCB i/c connections interconnections using Copper conductor wire of adequate size, earthing and LWB on the top , numbering and locking arrangement of each compartment separately etc. as reqd. INCOMER : 125 AMP FP MCCB BUS BAR : 160 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.8 sq mm / amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 4 No 40 AMP DP MCB Including Indication Lights With 4 Nos Space for Single Phase KWH Meters (For Flats DB) 1 No 40 AMP DP MCB Including Indication Lights (Common Area DB's) 1 No 40 AMP DP MCB Including Indication Lights (Pump) 1 No 40 AMP DP MCB (Spare) 1 No 63 AMP 4P MCB (Spare) complete panel as above
1
-
146408.47
SITC of cubicle type compartmentalized meter panel board directly on wall cum Floor mounted made out of 2 mm thick CRCA sheet duly powder painted and suitable for fixing following energy meters and following MCB having 20 mm thick wooden plate in the bottom of energy meter and glass in front, of 100mm x 100mm for meter reading in each compartment 4 strip vertical Al. Busbar of 500 amp capacity , din rail for MCB i/c connections interconnections using Copper conductor wire of adequate size, earthing and LWB on the top , numbering and locking arrangement of each compartment separately etc. as reqd. INCOMER : 200 AMP FP MCCB BUS BAR : 250 AMP, 500 Volts, 3 phase 50 HZ 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.8 sq mm/amp. The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. OUT GOINGS : 8 No 40 AMP DP MCB Including Indication Lights With 8 Nos Space for Single Phase KWH Meters (For Flats DB) 1 No 40 AMP DP MCB Including Indication Lights (Common Area DB's) 1 No 40 AMP DP MCB Including Indication Lights (Pump) 1 No 40 AMP DP MCB (Spare) 1 No 63 AMP 4P MCB (Spare) complete panel as above
1
-
137008.47
Design, Manufacture, Supply, Installation, Testing and Commissioning of Panel Fabricated out of 16 SWG CRCA sheet steel, IP 54, wall / floor mounting type with rain canopy The sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes 415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands, including connection with outgoing feeders complete in all respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid. INCOMER: 1 no. 100A, 50KA 4P MCCB with microprocessor based releases, ON indication, 1 no. multifunction meter (showing all power parameters), with Selector Switch, Matching Cast Resin CT's. + 3 Nos 63A DP MCB For each Phase.with 3 Nos Astronomical Weekly programmable time switch (SST- 1min) ON Phase for automaitc switching of landscape light fixtures at sun set and sun rise or twilight (auto on/ auto off and auto mode) with manual override faiclity with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site.BUS BARTPN Aluminium bus bar with heat Shrink Sleeve rated for 125A.
1
-
106536.44
Supplying of Following Sizes of 1.1 KV Grade Multicore Aluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etc and should be NABL certified as required. 3.5 C X 150 Sq.mm Al. XLPE arm.
80
-
1460.16
3.5 C X 95 Sq.mm Al. XLPE arm.
80
-
1012.71
3.5 C X 25 Sq.mm Al. XLPE arm.
80
-
361.86
Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground Including Excavation, Sand Cushioning, Protective Covering and Refilling the Trench etc. as required.Upto 35 sq. mm
80
-
327.96
Above 35 sq. mm and upto 95 sq. mm
80
-
343.22
Above 95 sq. mm and upto 185 sq. mm
80
-
357.62
Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required.3½ X 25 sq. mm (28mm)
2
-
265.25
3½ X 95 sq. mm (45mm)
2
-
498.3
3½ X 150 sq. mm (50mm)
2
-
590.68
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.. (BODY EARTHING)
6
-
6332.2
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
180
-
206.77
Supplying and laying 25 mm x 5 mm. G.I. strip in 40 mm dia. G.I. Pipe from earth electrode, including connection with GI nut, bolt, spring, washer excavation and re-filling etc as required.
60
-
598.3
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
80
-
59.32
Providing and laying non pressure NP2 class (light duty) RCC pipes with collars jointed with stiff mixtures of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 100 mm dia
30
-
561.01
250 mm dia
20
-
826.27
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 200 mm dia (OD-200 mm & ID-175 mm nominal)
30
-
566.1
Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre
14
-
92.54
Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape, Hole Seeling to be done complete as required. 32 mm dia
140
-
1149.87
Supply , Installation, Testing & Commissioning of new generation IP 65 LED 5700k post-top, energy saving, enviornmental freindly, long life aesthetically designed with symetrical light distribution, spun aluminium landsacpe luminiaries with high power LEDs as light sourche. Clear Cover offers bright illumination for different appliaction complete as required. (Make of BAJAJ CAT.NO. BGCL40WLEDWH / Similar to Havells UBYPT40WLED757PSYMTOPC/ Similar to Philips/ Simiar to WIPRO)
4
-
7076.27
Supply, Installation, Testing and Commissioning of Hybrid 50 Watt/ 45 Watt Solar Street Light luminaire with 6 Mtr Octagonal Pole & inbuilt SCC made IP65 & with MPPT (Maximum Power Point Tracking) which provides about 25% more charging efficiency by utilizing maximum energy harvested by solar PV modules. System should designed to withstand highly corrosive atmosphere and heavy wind loads. The modules are certified for industry standards IEC61215, IEC61730 (safety class 1 & 11), IEC61701 along with 6 Mtr. octagonal pole with 100 AH lead acid battery & 125 Wp solar panel Total lumen output should not less than 3100 lumen Complete with all Accessories & Control Gears etc. (Make of PHILIPS CAT NO. BRP111LED50/757/ Similar to Havells SOLAR AIO 40W/ Similar to BAJAJ BSZSL50WALL-IN-ONE WITH HYBRID)
14
-
25423.73
Supply Installation, Testing & Commisioning of 8W - 10w LED BOLLARD Light made of aluminum pipe powder coated black after phosphochromate treatment with aluminum heat sink for effective thermal management, sturdiness & excellent corrosion resistant. Mounting flange of MS sand casting is used at the bottom.PC diffuser cover in opal finish is used for glare free uniform light distribution.High efficiency long life LED module with SMD LED package mounted on MCPCB with lumen efficacy of 130 lm/W with system lumen 470Lm. Powered by built-in, isolated electronic LED driver in ABS housing with APFC (SMPS based constant current supply) with lower THD, Output Short / Open Circuit protection, Over Voltage protection, Surge Voltage protection. CCT 5700, CRI80, THD15%, PF.95, IP65,IK 07 ,Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input rated voltage:240VAC/50HZ. (Make of BAJAJ CAT NO. BGBOM6059WLEDWH/ Similar to Havells CONEBLS8WLED857PSYMTOPC/ Similar to PHILIPS BCP400LEDUCWPSUGRS1)
10
-
3133.05
Supplying of Following sizes 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing laid in ground including cost of digging upto required depth, 150 mm sand all around the cable, brick protection and back filling, clamped to wall with suitable clamps including saddles fixing bolts, Connection Testing and commissioning as Required. 2x6 sqmm
300
-
167.79
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
300
-
168
Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required.2x6 sqmm (19mm)
28
-
203.38
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
20
-
209.32
Supplying of 6 mtr long hot dip Galvanized octagonal Pole with SIingle arm bracket 1 mtr. long, top of the pole 70 mm dia (A/F) and bottom of the pole 135 mm dia (A/F) made out of 3mm sheet with MS base plate of size 225mm (NS) x 225mm (NS) x 16mm (NS) on precast RCC foundation complete with suitable size opening inside the pole with flush weather proof door with locking facility preferably with LN key having proper arrangement with Accommodating of 1 Nos. 6 Amp.,10 KA MCB & neutral link 4 way connector suitable for 25 sqmm cable complete with electrically safe including inside cable teMeterination with thimbles i/c wiring from pole box to fitting with 3x1.5 sq.mm. FRLS PVC insulated copper conductor wire, earth connection, din channel, earth stud and other accessories pertaining to this pole (But without street light fitting) etc as reqd. including providing & laying in position suitable RCC foundation of size 40 x 40 x 100 cm as required for 6 mtr. octagonal hot dip Galvanized Pole as per Manufacturers drawing with 1:2:4 concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) including excavation of all kind of earth such as all type of soil/soft rock or hard rock etc. as per existing site condition i/c providing, cutting, bending and placing reinforcement & J type foundation bolts , anchor plate and templates in position as per manufacturer standard and providing PVC pipe for cable entry and exits including disposal of surplus malba / softrock / hardrock stone etc.as required
14
-
9756.78
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements