Public Works Department Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 35,17,060Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_13520_1Tender No
78 CDL of Leh of 2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
110.16
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
72.49
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
225.75
-
-
... More
Random Rubble masonry with hard stone in foundation and plinth
including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand)
1367.12
-
-
... More
Dry random rubble masonry with hard stone in foundation and plinth:
With bond stone.
988.9
-
-
... More
Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.
18169.3
-
-
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. 16.82.1 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
2725.4
-
-
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge
1816.93
-
-
... More
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 16.63.1 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
908.47
-
-
... More
Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M. @ 0.75 Kg/sqm.
On bitumen surface @ 0.50 Kg/sqm.
18169.32
-
-
... More
On bitumen surface @ 0.50 Kg/sqm.
18169.32
-
-
... More
2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt.
18169.32
-
-
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per
specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).
Note: Cement content considered in this item is 303 kg/ cum Excess/less cement used as per design mix is payable/recoverable separately
975
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
282.19
-
-
... More
Providing and fixing Glow studs of size 100x20mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact Polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The Glow stud shall support a load of 13635 kg tested in accordance with
ASTM D4280. The slope of retro-reflective surface shall be 35 +/- 5 degrees to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as
recommended in BS : 873 part 4 : 1973. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
1250
-
-
... More
Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign
656.04
-
-
... More
Providing, laying and making kerb channel 30cm wide and 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth etc. complete as per direction of Engineer-incharge.
1968.13
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 16.94.1 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
4295.37
-
-
... More
Providing and laying tactile Type 1- 300x300x60 Y in W Top IIII :Supply of Tactile Liner (Type - )1 of Size 300 x 300 x 60 mm thckness mm (Top Yellow Colour finish & rest of grey colour) manufactured with M 30 grade of concate of approved make in all colours and shades in for outdoor floor such as footpath,court yard,multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
786
-
-
... More
Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in charge.
1913.5
-
-
... More
Providing and laying Jersey Barrier - Flower Pot of overall size 1500 mm Length X 830 mm Height X Bottom width 610 mm. Manufactured by M-40 grade of high performance self compacting concrete in steel moulds. Reinforced with 8 mm dia. Tor steel at 150 mm centre to centre both ways.
54
-
-
... More
Supply and fixing of RCC Bollard with light fixture of size 600 mm Height & cross section 150 mm x 160 mm. Bollard is fitted with a 10 watt LED light and suitable conduit for carrying an electrical cable. Manufactured with M-40 grade of high performance self compacting concrete in jointless FRP mould. Suitably reinforced so as to prevent damage during transportation and handling. Bollard is installed by digging a pit of 150mm depth and 200mm x 200mm crossection, levelling the bottom surface, inserting the bollard in the pit and filling the gap with lean concrete (1:3:6).
78
-
-
... More
Supply and fixing of Exposed Aggregate Cylindrical Bollard Cum Stool (Model: Type 5) of size 400 mm (Top Dia) x 300 mm (Bottom Dia) x 475 mm (Overall Height ) x 150 mm Stem Height. Surface of the bollard is of exposed aggregate finish of black and white marble chips. Manufactured by using M - 30 grade of concrete using vibor compaction process using FRP moulds. Fixing of the bollard is done by digging a pit of 150mm depth x 300mm diameter. The gap is filled with lean concrete.
55
-
-
... More
Supply and laying of Saucer Drain (Model: SD-04) of size 315 mm Length X 310 mm width x 75/100 mm Thickness, without holes. Manufactured with M 30 grade of concrete using vibro compacting process in jointless FRP moulds. Saucer drain is installed on a properly compacted base.
246
-
-
... More
Supply and fixing of Stool with Platform. Overall Dimensions: Stool of 400 mm diameter X 400 mm Height X 100 mm Seat Thickness X 300 mm Stem Length with platform of size 600 mm x 600 mm x 50 mm thickness. Manufactured by using M 30 grade of Concrete using vibro compaction process using FRP moulds. The bottom of the stool has an embedded electroplated nut of 12mm dia x 40mm length which is welded to a 100mm long 8mm rebar. The platform is attached ot the botoom of the stool using a hot dip galvanized bolt. The stool with plaform is kept on a level properly compacted surface.
81
-
-
... More
Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charg .1 Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm.
86
-
-
... More
Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm.
73
-
-
... More
Providing and fixing post delineators made of ABS round body fitted with 2nos. 100mm dia high reflective and reflectors and mounted on M.S. pipe of 65mm dia duly powder coated with anti-rust and anti-theft steel to be installed as per direction of Engineer-in-charge.
125.33
-
-
... More
Supply and fixing of Road Indicator (Model: IND - 01) of overall size 1950 mm Height x 1350 mm Width x 65 mm thickness. Manufactured with M - 40 grade of high performance self compacting concrete in jointless FRP moulds. Suitably reinforced with a mix of 12mm and 6mm mild steel with steel weight of at least 16 kgs. The road indicator is fixed to the ground by digging a pit of 600mm depth, aligning the road indicator inside the pit and filling the gap with lean concrete (1:3:6).
24
-
-
... More
Supply and fixing of Road Indicator (Model: IND-03) of size width at the top of 510 mm x 2000 mm height x thickness 80 mm x Width at base 720 mm and base thickness 180 mm. Manufactured with M - 40 grade of high performace self compacting concrete in jointless FRP/Steel moulds. Suitably reinforced with a mix of 10mm, 8mm and 6mm mild steel with steel weight of at least 10 kgs. The road indicator is fixed to the ground by digging a pit of 450mm depth, aligning the road indicator inside the pit and filling the gap with lean concrete (1:3:6).
33
-
-
... More
Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. New work (Two or more coats)
656.04
-
-
... More
Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
243.94
-
-
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.
All kinds of soil :
198.45
-
-
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 50 meter beyond 1 m from cutting edge All kinds of soil :
2105.72
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
532.78
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
56.99
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: :5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
154.93
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns
295.04
-
-
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
208.09
-
-
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
1856
-
-
... More
12mm Cement plaster finished with a floating coat of neat cement of mix: ( 1 cement : 3 fine sand)
1940.03
-
-
... More
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
692.28
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
156
-
-
... More
Providing and laying non-pressure NP2 class (light duty)R.C.c pipes with collars jointed with stiff mixture of cement mortar in the protection of 1:2 (1 cement:2 fine sand )including testing of joints etc completye 150 mm dia
955.54
-
-
... More
Providing and laying non-pressure NP2 class (light duty)R.C.c pipes with collars jointed with stiff mixture of cement mortar in the protection of 1:2 (1 cement:2 fine sand )including testing of joints etc completye 250 mm dia R.C.c pipe
610.69
-
-
... More
Providing and laying non-pressure NP2 class (light duty)R.C.c pipes with collars jointed with stiff mixture of cement mortar in the protection of 1:2 (1 cement:2 fine sand )including testing of joints etc completye 300 mm dia R.C.c pipe
41.95
-
-
... More
Providing and laying non-pressure NP2 class (light duty)R.C.c pipes with collars jointed with stiff mixture of cement mortar in the protection of 1:2 (1 cement:2 fine sand )including testing of joints etc completye 450 mm dia R.C.c pipe
304.8
-
-
... More
Providing and laying non-pressure NP2 class (light duty)R.C.c pipes with collars jointed with stiff mixture of cement mortar in the protection of 1:2 (1 cement:2 fine sand )including testing of joints etc completye 500 mm dia R.C.c pipe
25.2
-
-
... More
Providing and laying non-pressure NP2 class (light duty)R.C.c pipes with collars jointed with stiff mixture of cement mortar in the protection of 1:2 (1 cement:2 fine sand )including testing of joints etc completye 600 mm dia R.C.c pipe
12.6
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design 20.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
40
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design 20.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
13
-
-
... More
Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 100 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
82
-
-
... More
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 19.9A.1 1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592,
total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : 20.9A.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
23
-
-
... More
Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 19.9B.1 2.30 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :
With Sewer bricks conforming to IS : 4885
4
-
-
... More
Extra depth for circular type manholes 20.10.1 Manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With Sewer bricks conforming to IS : 4885
12.25
-
-
... More
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25 mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing. including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
175
-
-
... More
Constructing brick masonry road gully chamber of specified size withcommon burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design:20.23.1 Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating.
23
-
-
... More
Chamber size 45x45x77.50 cm including precast R.C.C grating with frame 450x100 mm vertical grating.
5
-
-
... More
Chamber size 110x50x77.50cm including precast R.C.C grating with frame 500x450 mm horizontal and 450x100 mm vertical grating.
2
-
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
20.24.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line-
7
-
-
... More
Extra for depth beyond 45 cm of brick masonry chamber with common burnt clay (non modular) bricks of class designation 7.5
For 455x610 mm size
4
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 25 mm dia. nominal bore
10
-
-
... More
32 mm dia. nominal bore
105
-
-
... More
80 mm dia. nominal bore
235
-
-
... More
100 mm dia. nominal bore
165
-
-
... More
Painting G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. 25 mm diameter pipe.
90
-
-
... More
32 mm diameter pipe.
180
-
-
... More
80 mm diameter pipe.
295
-
-
... More
Constructing masonry Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3
mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. 19.27.1 For sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid.
19.27.1.1 Chamber 60x60x75 cm
8
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm dia. nominal bore
3
-
-
... More
32 mm dia. nominal bore
2
-
-
... More
80 mm dia. nominal bore
2
-
-
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end) 80 mm dia. nominal bore
1
-
-
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by
Engineer-in-Charge. All kinds of soil :
111.75
-
-
... More
Ordinary Rock
335.25
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation/banking
excavated or stacked material :
Ordinary Rock
356
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
301.22
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
4
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
12
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
97.19
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete above plinth level
19437
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
15.33
-
-
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
344.7
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
105.54
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
8.4
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
8.93
-
-
... More
Providing and laying autoclaved aerated cement blocks masonry with150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).
2.5
-
-
... More
Steel work welded in built up sections / framed work , including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer using structural steel etc . as required. In gratings , frames , guard bar, ladder, railings , brackets , gates and similar works.
38.49
-
-
... More
12 mm cement plaster of mix : :6 (1 cement: 6 coarse sand)
9.43
-
-
... More
12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand)
9.46
-
-
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
43.61
-
-
... More
6 mm cement plaster 1 : 3 (1 cement : 3 fine sand) finished with a floating coat of neat cement on top of walls when dry for bearing of R.C.C. slabs and beams
205.8
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
11.1
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage.
236.74
-
-
... More
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25 mm and over all minimum length 263mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing. including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
7
-
-
... More
Supplying and fixing C.I. cover without frame for manholes: 560 mm diameter C.I. cover ( heavy duty) the weight of the cover to be not less than 108 kg
1
-
-
... More
Supply, Installation, Testing & Commissioning of Single Stage/Multi stage Horizontal / Vertical centrifugal monobloc pumping set with delivery SS 304 body and SS 304 impeller, shaft of stainless steel SS 316 and SS shaft sleeve C.I. Base & head, mechanical seal, connected to a TEFC induction motor suitable for 400/440 volts, 3 phase 50 cycles A.C. supply with suitable starter panel, 150 mm dia pressure gauge with gunmetal isolation cock, level controlled, Suitable priming tank, vibration eliminating pads as required, M.S fabricated base plate bolted to cement concrete foundations complete (Excluding Civil works, base foundation requirement shall be given by manufecturer). Requirements: Capacity /Flow rate : 30.0 M3/ Hr
Pumping Head : 30 m
Power Requirement (kw) : 10HP/8.5KW
2 Nos. Pump (1 Working +1 Standby)
2
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m ,as directed by Engineer - in - Charge All Kind of soil
877
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials. Ordinary or hard rock.
423.09
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
33.9
-
-
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
33
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more
4125
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete
148.53
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
148.53
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
237.8
-
-
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge,upto 90 metre depth below ground level. Rocky strata including boulders 400 mm dia
168
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.200 mm nominal size dia
84
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well screen (RMS) pipe with ribs, conforming to IS: 12818, including hire and labour charges, fittings and accessories etc all complete for all depths as per direction of Engineerin- charge. 200mm nominal size dia
84
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3.87
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3.87
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge
3.87
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
3.02
-
-
... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin-charge.
4
-
-
... More
Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing off by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or /and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)
3356.57
-
-
... More
Excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material lead upto 50 m and lift upto 1.5 m, disposed material to be neatly dressed
376
-
-
... More
Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)
2760.45
-
-
... More
Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 20 mm
1533.58
-
-
... More
Fine dressing of the ground
61.34
-
-
... More
Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately)
3987.31
-
-
... More
Mixing earth and sludge or manure in proportion specified or directed by officer in charge.
3987.31
-
-
... More
Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) a)In rows 5 cm apart in either direction
4280.29
-
-
... More
b)with grass turf
1854.04
-
-
... More
Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing & disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid
separately.)
1286
-
-
... More
Providing and fixing M.S tree guard 50 cm square in plan, height 1.40 meter above ground level and 0.50 meter below ground level. The vertical members shall consist of four nos. angle iron of size 25x25x5 mm, 1.9 m long, one at each corner and 8 nos flat iron of size 25x5 mm, 1.4 m long. The vertical members shall be welded to 4 nos. 25x6 mm M.S flats placed horizontally around the vertical members of the cage. One name plate of 1 mm thick M.S sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD/PWD/any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer complete in all respect.
136
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 part of stacked volume of earth after reduction
by 20% :1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish & surplus earth, if any with all leads & lifts ( cost of sludge, manure or extra good earth, if needed, to be paid for separately) Holes 1.2 mtr dia & 1.2 mtr deep
24
-
-
... More
Holes 90 em dia & 90 em deep
31
-
-
... More
Holes 60 cm dia & 60 cm deep
33
-
-
... More
Holes 45 cm dia & 45 cm deep
48
-
-
... More
Edging with bricks laid dry length wise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth within a lead of 50 m: Common burnt clay (non modular) bricks of class designation 7.5.
486.2
-
-
... More
Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded)
69.85
-
-
... More
Providing and displaying of Speciman Croton petra Banglore variety plant, in 30 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge.
85
-
-
... More
Providing and displaying of Diffenbachia Tropic-snow plant, having ht. 60 cm
126
-
-
... More
Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm
95
-
-
... More
Providing and displaying of Livistona palm plant, having ht. 30 cm to 45 cm,
110
-
-
... More
Providing and displaying of Money Plant Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 plants in each pot,
24
-
-
... More
Providing and displaying of Philodendron sellum plant, having ht. 45 cm to 60 cm with 12 to 16 leaves,
35
-
-
... More
Providing and Displaying Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm
83
-
-
... More
Supply and stacking of Jasminum grandiflorum (chameli) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. .
335
-
-
... More
Provising and fixing natural sand stone Stepping stone unpolished of size not less than 600x600x35 mm on 50 mm thick sand bed
115
-
-
... More
Supply and stacking of UREA at Site
65
-
-
... More
Supply and stacking of DAP fertilizer at Site
45
-
-
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking the clods and mixing with sludge or manure in the ration of 8:1 (8 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8 %), flooding with water, filling with the earth if necessary, watering and finally fine dressing, leveling etc. including stacking & disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 mtr. and lift upto 1.5 mtr. complete ( cost of sludge, manure or extra earth to be paid for separately)
1470
-
-
... More
Supplying & Fixing of RCC Tree Guard (Model TG 04 ) consisting of four panels, each panel of height 1800 mm, 600 mm width at bottom, 300 mm width at top and 35 mm thickness with eight slots of 75 mm height and one slot of 450 mm height. All precast components are manufactured using M 30 grade grey cement concrete using vibro compaction process using jointless FRP moulds so as to achieve shuttering finish on five faces and trowel finish on one face. Reinforced with 8mm and 6mm mild steel so as to make weight of steel in each panel to be 2.55 kg. Tree guard is installed by digging a pit of 600mmx600mmx300mm depth, levelling the bottom surface, erecting the four panels and filling the pit with lean concrete (1 cement:3 sand:6 coarse aggregare mix design). After erection the four panels are tied together with nylon ties.
120
-
-
... More
Supplying & Fixing of tree surround of overall size 1500mm width x1500mm length x40mm/75mm thickness. Each Tree Surround consists of 4 Nos panels of 750 mm Length X 750 mm Width X 40 mm/75mm thickness. All precast components are manufactured using M 30 grade grey cement concrete using vibro compaction process using jointless FRP moulds so as to achieve shuttering finish on five faces and trowel finish on one face. Reinforced with 8mm mild steel so as to make weight of steel in each panel to be not less than 3.9 kg. Tree surround is installed around a tree after tilling and levelling the surrounding area.
78
-
-
... More
Supply and fixing of V shaped Fence of overall dimensions: 1035 mm overall Height x 1000 mm Length x 50 mm (thickness). Precast Fence is manufactured using M 30 grade grey cement concrete using vibro compaction process using jointless FRP moulds so as to achieve shuttering finish on five faces and trowel finish on one face. Reinforced with 8mm mild steel so as to make weight of steel in each fence to be not less than 3.3 kg. Fixing to be done by digging a trench of 300mm width x 300mm depth, building a 9" thickness brick wall of above ground height of 300mm, incorporating the v shaped fence in the wall using mortar so as to achieve an above ground height of at least 1135mm. The exterior surface of the bricks is finished with mortar.
86
-
-
... More
Supply and Fixing of Square Table with 4 Benches consisting of 2 Nos. base support of size 1200mm width x 715mm height x 100mm thickness in grey cement, 1 Nos. Table top of size 1000mm X 1000mm X 50mm thickness in red color finish, and 4 Nos. benches of size 1000mm length X 350mm width X 50mm thickness in red color finish. Overall Dimensions after assembly shall be height of table 780 mm; and Height of benches 450 mm. Each bench to have 12mm and 8mm dia tor mild steel with weight not less than 4.45kg. Each Bench WILL HAVE 4 MILD STEEL GALVANISED COUPLING NUTS OF SIZE 12MM DIA X 40MM LENGTH ON EACH SIDE EMBEDDED IN CONCRETE AT THE TIME OF CASTING AND SUITABLY WELDED TO THE MAIN REINFORCEMENT. Table top and benches have red colored synthetic iron oxide pigment integrally mixed in concrete to give the manufactured products a terracota finish. Total weight of steel in all precast components to be not less than 38.5 kg. All precast components are manufactured using M 30 grade cement concrete using vibro compaction process using FRP/Steel moulds so as to achieve shuttering finish on five faces and trowel finish on one face. The table top, benches and legs are assembled using m.s angle (total weight 13 kg) so as to make the entire assembly rigid.
AFTER ASSEMBLY OF LEGS, TABLE TOP and BENCHES AT SITE THE TOP OF THE TABLE and BENCHES WILL BE PAINTED WITH RED COLOR ACRYLIC BASED PAINT
24
-
-
... More
SUPPLY AND FIXING OF (CHAIR BENCH WITH BACK REST AND HAND REST CONSISTING OF TWO LEGS MANUFACTURED USING M-30 GRADE GREY CEMENT CONCRETE OF BACK HEIGHT 890MM AND FRONT HEIGHT 460MM AND BOTTOM WIDTH 690MM AND 80/90MM THICKNESS. EACH LEG TO BE REINFORCED WITH 4 NOS. OF 6 MM DIA. MILD STEEL BARS DISTRIBUTED UNIFORMLY ALONG THE SECTION AND PERIPHERY OF THE LEG WITH SUFFICIENT NOS. OF 4MM DIA. STEEL STIRRUPS SO AS TO MAKE WEIGHT OF STEEL IN EACH LEG TO BE 3.1KG. EACH LEG WILL HAVE 4 HOLES FOR RECEIVING 12MM DIA. ELECTROPLATED FULL THREADED 12MM DIA (2NOS 90MM AND 2 NOS. 100MM LENGTH) FOR FIXING SITTING AND BACKREST RCC SLABS. (2 NOS. 12 MM DIA SOCKET IN EACH LEG TO ACCOMMODATE ANGLES ARE PROVIDED IN EACH LEG). AND
1 NOS. RCC CURVED AND FLUTED SITTING SLAB (AS SHOWN IN PHOTOGRAPH AND SAMPLE) OF SIZE 1500 X 420 MM X ABOUT 50MM THICKNESS MANUFACTURED USING M-30 GRADE GREY CEMENT MIXED WITH 3 % RED PIGMENT OF LANXESS OR EQUIVALENT MAKE AND EACH SLAB WILL BE REINFORCED WITH 12MM AND 8MM DIA TOR STEEL ( WEIGHT OF STEEL WILL BE 5.5 KG). THE SLAB WILL HAVE 4 MILD STEEL ELECTROPLATED COUPLING NUTS OF SIZE 12MM DIA X 40MM LENGTH ON EACH SIDE EMBEDDED IN CONCRETE AT THE TIME OF CASTING AND SUITABLY WELDED TO THE MAIN REINFORCEENT
AND
1 NOS. RCC CURVED AND FLUTED BACKREST SLAB (AS SHOWN IN PHOTOGRAPH AND SAMPLE) OF SIZE 1500 X 450 MM X ABOUT 50MM THICKNESS MANUFACTURED USING M-30 GRADE GREY CEMENT MIXED WITH 3 % RED PIGMENT OF LANXESS OR EQUIVALENT MAKE AND EACH SLAB WILL BE REINFORCED WITH 8MM DIA. TOR STEEL ( WEIGHT OF STEEL WILL BE 4.0 KG). THE SLAB WILL HAVE 4 MILD STEEL GALVANISED COUPLING NUTS OF SIZE 12MM DIA X 40MM LENGTH ON EACH SIDE EMBEDDED IN CONCRETE AT THE TIME OF CASTING AND SUITABLY WELDED TO THE MAIN REINFORCEENT
AND
IN EACH BENCH BOTTOM SLAB WILL BE BOLTED WITH THE LEGS FROM THE SIDE WITH THE HELP OF 4 NOS. HALF THREADED 12MM DIA. 100MM LENGTH ELECTORPLATED STEEL HEX BOLTS AND BACK REST SLAB WILL BE BOLTED FROM SIDES WITH 4 NOS. 12MM DIA HALF THREADED BOLTS (2 NOS.90MM AND 2 NOS. 100MM LENGTH). 2 NOS. ANGLE OF SIZE 50X50X5 AND 360MM LENGTH ARE FITTED TO THE LEGS TO GIVE ADDITIONAL SUPPORT TO THE SITTING PLANKS. THE ANGLES WEIGH 1.3 KG EACH AND ARE FIXED WITH 12X25MM HEX BOLTS.
AND
AFTER ASSEMBLY OF LEGS AND SLABS AT SITE AND TOP OF THE SLABS WILL BE PAINTED WITH RED COLOR ACRYLIC BASED PAINT
25
-
-
... More
Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix. 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 6 mm nominal size) reinforced with 7 nos. ( 3 nos horizontal and 4 nos vertical ‘U” shape ) M.s wires of 3.5 mm dia as per design, including required form work finishing with cement punning on exposed surface curing for specified period and stacking in required rows and height, all complete as per direction of officer-in-charge. Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm
146
-
-
... More
Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm
274
-
-
... More
Providing Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix. 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 6 mm nominal size) reinforced with 7 nos. ( 3 nos horizontal and 4 nos vertical ‘U” shape ) M.s wires of 3.5 mm dia
as per design, including required form work finishing with cement punning on exposed surface curing for specified period and stacking in required rows and height, all complete as per direction of officer-incharge. Top inner width 35 cm, outer bottom width 25 cm, total height 35 cm with wall thickness of 25.4 mm
183
-
-
... More
System Head - Supply & installation, Jointing, testing of 2.5" Twin Disk Filter (Make - Jain 0r equivalent)
3
-
-
... More
System Head - Supply & installation of 1" ARI Vac release valve (Make Jain or equivalent)
3
-
-
... More
System Head - Supply & installation of Pressure Gauge (Make Jain or equivalent)
8
-
-
... More
System Head - Supply & installation of By Pass Assembly (Make Jain or equivalent)
4
-
-
... More
System Head - Supply & installation of 2" Pressure Relief Valve (Make Jain or equivalent)
8
-
-
... More
Network - Supply & installation, Jointing, testing of 20mm UPVC Self fit pipe of 6 Kg Pressure minimum confirming to IS 13592 (Make Finolex, Supreme, Jain or equivalent)
200
-
-
... More
Network - Supply & installation, Jointing, testing of 50mm UPVC Self fit pipe of 6 Kg Pressure minimum confirming to IS 13592 (Make Finolex, Supreme, Jain or equivalent)
400
-
-
... More
Network - Supply & installation, Jointing, testing of 63mm UPVC Self fit pipe of 6 Kg Pressure minimum confirming to IS 13592 (Make Finolex, Supreme, Jain or equivalent)
400
-
-
... More
Network - Supply & installation, Jointing, testing of 75mm UPVC Self fit pipe of 6 Kg Pressure minimum confirming to IS 13592 (Make Finolex, Supreme, Jain or equivalent)
250
-
-
... More
Emitting System - Supply & installation of Professional Gear driver Rotor (Make Jain or equivalent)
100
-
-
... More
Emitting System - Supply & installation of 3/4" Swing Joint Assembly Make Jain or equivalent)
100
-
-
... More
Emitting System - Supply & installation, testing of approved make Sprinkler spout-part circle-TE2 type for shrubs (Make Jain or equivalent).
60
-
-
... More
Emitting System - Supply, Installation & testing commissioning of approved make Impact Popup sprinkler Micro and spray jet with 360 & 180 adjustable angles (Make Jain or equivalent)
60
-
-
... More
Emitting System - Supply & installation of 1/2" Swing Joint Assembly Make Jain or equivalent)
25
-
-
... More
Emitting System - Supply & installation of 63mm Automated ball valve (Make Jain or equivalent)
20
-
-
... More
Emitting System - Supply & installation of 6" Round valve box with cover (Make Jain or equivalent)
12
-
-
... More
Emitting System - Supply & installation of Quick coupling valve with key (Make Jain or equivalent)
14
-
-
... More
Supply and installation of all fittings and accessories like drip caps, Tees, Bends, Offsets etc. including MS angle with G.I. clamps complete required for completion of System Head, Network and Emitting System
1
-
-
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :
110.35
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
70.13
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
2.62
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : . 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size )
58.65
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)
0.53
-
-
... More
Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete
15.3
-
-
... More
4.20 Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square meter on damp proof courses after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
15.3
-
-
... More
5.33A Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources and using recycled concrete aggregate (RCA) as coarse aggregate and fine aggregate within permissible utilization of 20% each, Portland Pozzolana /Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level
26.86
-
-
... More
All works above plinth level upto floor V level
149.95
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
4627
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
24562
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns,raft etc. for mass concrete.
67
-
-
... More
Suspended floors, roofs, landings, balconies and access platform.
398
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
337.04
-
-
... More
Columns , Pillars , Piers, Abutments, Posts and Struts.
179
-
-
... More
Small lintels not exceeding 1.5 m clear span, mouldings as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
8
-
-
... More
Weather shades, chajjas, corbels etc. including edges.
11.4
-
-
... More
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)
10.74
-
-
... More
Providing & fixing upto floor five level precast cement concrete hollow blocks, including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete. 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size)
61.78
-
-
... More
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing , curing , molding and polishing to edge to give high gloss finish etc. complete at all levels Granite of any colour and shade Area of slab over 0.50 sqm
19.48
-
-
... More
Providing and fixing lSl marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35mm thick including lSl marked Stainless Steel butt hinges with necessary screws.
8.82
-
-
... More
25 mm thick (for cupboard) including ISI marked nickel plated bright
finished M.S. Piano hinges IS: 3818 marked with necessary screws.
3.15
-
-
... More
Providing and fixing factory made u PVC white colour sliding glazed window upto 1.50 m in height dimension comprising of u PVC multi - chambered frame with in - built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length ( shape & size according to u PVC profile) , appropriate dimension of u PVC extruded glazing beads and u PVC extruded inter locks , EPDM gasket , wool pile , zinc alloy ( white powder coated ) touch locks with hook , zinc alloy body with single nylon rollers ( weight bearing capacity to be 40 kg ) , G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners , including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer - in - Charge. ( Single / double glass panes , wire mesh and silicon sealent shall be paid separately ) Note : For u PVC frame and sash extruded profiles minus 5 % tolerance in dimension i.e . in depth & width of profile shall be acceptable . Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made . Make NCL Veka , Mozart , Prominance .Two track two panels sliding window made of ( big series ) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. ( Area of window above 1.75 sqm upto 2.50 sqm).
9.12
-
-
... More
Providing and fixing glazing in PVC / aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
9.12
-
-
... More
Providing and fixing bright finished brass tower bolts ( barrel type ) with necessary screws etc complete.250 x 10mm
7
-
-
... More
Providing and fixing bright finished SS-316 Grade 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). Make (DLine,Kich ,Becker Make)
12
-
-
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete
7
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood
0.29
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
2902.64
-
-
... More
Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :
12
-
-
... More
Kota stone slabs 20 mm thick in risers of steps ,skirting,dado and pillars laid on 12 mm (average) thick cement morter 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
3.5
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufactures) with water absorption's less than 0.08% and confirming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.Size of tile 60x60 cm
98.28
-
-
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting , risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
6
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
8.5
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In colour such as White , Ivory, Grey , Fume Red Brown
25.53
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75 mm deep chase
110
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
12
-
-
... More
Providing and fixing on wall face un - plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes . 110 mm diametre
72
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single tee with door 110 mm
12
-
-
... More
Shoe (Plain) 110 mm
12
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
72
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
12
-
-
... More
12 mm cement plaster of mix :1:6 ( 1 cement : 6 coarse sand )
517.2
-
-
... More
6 mm cement plaster to ceiling of mix :
399.74
-
-
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick
916.94
-
-
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004 , Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot Tinted) with silicon additives. New work ( Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre /10 sqm.
163.13
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
94.67
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
658.34
-
-
... More
Providing & applying PU based high performance waterproofing treatment over terrace having pure polyurethane based, single component, low VOC, elastomeric, seamless, moisture curing, waterproof membrane, Dr. Fixit FlexiPU 270(I), applied in 2 coats over After carrying the necessary preparation with roller at a total consumption of 1.5 Kgs/Sqmt, having specific gravity of minimum 1.30, having an elongation capacity of over 400%, with tensile strength of 2.00Mpa, Adhesion to concrete surface over 2.00N/mm2, Shore A Hardness of 75, Fire resistance EURO Class-F, with Anti-root propertise, with a service temperature range of -40deg C to 80deg C, with solids content of around 90%, to be applied by brush/roller over the RCC slab and on the vertical surfaces upto 300mm above FFL, thereafter ponding with water for 3 days etc. complete.The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guaranteed for 10 years against any leakage and by authorised by company with due tto certified .make pd lite dr fix it
395
-
-
... More
Providing and fixing aluminum work with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1300
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shad c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanized with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bimetallic contacts all complete required to perform as per specification and drawing The item includes cost of all material &labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per theArchitectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Claddingshall be measured in sqm. up to two decimal places. . Make Alstrong, Virgo, Alutech
130
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape , made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
120
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
11
-
-
... More
Providing and fixing white vitreous china water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever)conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied:W.C. pan with lSI marked white solid plastic seat and lid.
2
-
-
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm (Model no AQV 43110A Acquaviva make)having sensor operated pre & post flushing (Model no AV 9099 ,Acquaviva make), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (Make: Acquaviva/Toto/Grohe)
2
-
-
... More
Providing and fixing wash basin with fixing arrangement, including C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (Make: Acquaviva/Toto/Grohe) Under the Counter Wash basin of size 440 x 440 x 100,Model.No. ( AQV 87821D) of Acquaviva or equivalent Toto/Grohe
2
-
-
... More
Kitchen Sink 600x510x200mm , Incl all fitting CP waste. PVC waste pipe . making PVC connections.
1
-
-
... More
P/F 8mm dia C.P/S.S jet with flexible tube up to 1mter long with S.S triangular plate to eurepean type W.C of approved qaulity and make.
2
-
-
... More
Providing and fixing SS AISI-316 Grade Toilet Paper Holder with Flap complete with brackets fixed with CP brass screws PVC sleeves etc. Complete: 155 mm long .Model No- RDA-009 , of Acquaviva, or equivalent.(Make: Kich / Jaquar / Roca / Cera/ Arch / D-Line)
2
-
-
... More
Providing & fixing cockcroch trap S.S. grating of approved design for floor traps etc. including setting in floor with cement mortar. 100 mm dia
3
-
-
... More
Providing material and labour for fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810gms. 15 mm nominal bore.
3
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
3
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.
2
-
-
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
2
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm
2
-
-
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 25mm OD(SDR-7.4)
7.5
-
-
... More
PN-16 pipe , 32mm OD(SDR-7.4)
12.5
-
-
... More
PN-16 pipe , 40mm OD(SDR-7.4)
30
-
-
... More
Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD(SDR-7.4)
35
-
-
... More
External work including trenching, refilling etc PN-10 pipe , 50mm OD (SDR-11).
20
-
-
... More
Providing material and labour for fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
2
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore
1
-
-
... More
Providing material and labour for placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
2000
-
-
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sewerage waste discharge system (IS:13592 : 1992 Marked) of approved quality /make supreme, jain pipes, sudhakar, prince or equivalent 100 mm dia
12.5
-
-
... More
75mm diameter :
12.5
-
-
... More
Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sewarage waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Bend of required degree with access door, 100 mm dia
2
-
-
... More
75 mm dia
3
-
-
... More
Plain bend of required degree. 100 mm dia
2
-
-
... More
75 mm dia
3
-
-
... More
Heel rest sanitary bend 100 mm dia
2
-
-
... More
Single equal plain junction of required degree : 75x75x75 mm
3
-
-
... More
Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design.20.3.3 180 x 150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Providing material and labour for laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150mm dia R.C.C pipe
10
-
-
... More
250mm dia R.C.C pipe
15
-
-
... More
20.17 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of For pipes 250 to 300 mm diameter
1
-
-
... More
Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design: Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating.
5
-
-
... More
Supplying of following Size 3.5 core, / XLPE Aluminium Armoured Power Cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 150 Sq mm
580
-
-
... More
240 sq. mm
500
-
-
... More
300 sq. mm
520
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 95 sq. mm and upto 185 sq. mm
140
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
460
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required. Above 95 sq. mm and upto 185 sq. mm
140
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
140
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 150 sq. mm (50 mm)
27.4
-
-
... More
3½ X 240 sq. mm (62mm)
5428
-
-
... More
3½ X 300 sq. mm (70mm)
84
-
-
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required. (for road crossing) 150 mm dia
140
-
-
... More
250 mm dia
180
-
-
... More
300 mm dia
280
-
-
... More
EARTHING FOR SUB-STATION, LT PANELS Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
10
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
5
-
-
... More
Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/termination with GI thimble etc. as required.
220
-
-
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)
135
-
-
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm)
91
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
55
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
44
-
-
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
65
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
30
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
35
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
30
-
-
... More
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
40
-
-
... More
EXTERNAL LIGHTING WORK Supply, Installation, assembling, connection, testing & commissioning of Supply of 5W 5W 3in1 2700-6500K CCT tunable Solar bollard IP65,3000K,IP65,Size:200x637mm,changing timing 6-8 hours,lighting time 8-10 hours
15
-
-
... More
Supply of 5W 5W 3in1 2700-6500K CCT tunable Solar bollard IP65,3000K,IP65,Size:200x637mm,changing timing 6-8 hours,lighting time 8-10 hours
300
-
-
... More
Supply, Installation, assembling, connection, testing & commissioning of decorative post top light made up Spun 30W LED solar street Light,CCT:5700K, Tope of Pole OD:40mm-95mm, battery type:LiFePO4,in built PIR Sensor,Battery Capacity:30Ah, Mounted on existing 6 mtr. Single arm Pole Make Legero, K-Lite, Philips, Wipro
151
-
-
... More
Supply, Installation, assembling, connection, testing & commissioning of 30W Astra flood light with pressure Die-cast housing Better Heat Dissipation,IP66 High Ingress Protection against Dust and Moisture Rated input voltage 240Vac,Beam angle 60 degree,CCT:3000K
4
-
-
... More
Supply, Installation, assembling, connection, testing & commissioning of 30W Ring mini post top,. Aluminium housing with corrosion resistant powder coat and UV stabilised vandal proof milky diffuser. IP65,3000K,Diameter Ø407mm,H:210mm
69
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
350
-
-
... More
90 mm dia (OD-90 mm & ID-76 mm nominal
320
-
-
... More
120 mm dia (OD-120 mm & ID-103 mm nominal)
280
-
-
... More
DG & TRANSFORMER CHANGEOVER CUM MIAN LT PANEL. DG Incoming Air Circuit Breaker from 250 kVA DG set 300 amps 4 pole electrically operated manually draw out type MOULDED CASE CIRCUIT BREAKER (MCCB) with microprocessor release unit , for short circuit, over current and earth fault protection with adjustable setting as per specification and with following accessories :Digital energy meter with Maximum demand indicator (conzerve – EM 6400 or equivalent) of accuracy class-I, with 3 Nos. 1200/5 amps 15VA CTs. DG Incoming Air Circuit Breaker from 250 kVA DG set 300 amps 4 pole electrically operated manually draw out type MOULDED CASE CIRCUIT BREAKER (MCCB) with microprocessor release unit , for short circuit, over current and earth fault protection with adjustable setting as per specification and with following accessories :Digital energy meter with Maximum demand indicator (conzerve – EM 6400 or equivalent) of accuracy class-I, with 3 Nos. 1200/5 amps 15VA CTs. Phase sequence relay shall be protected by 2 Amps TP MCB - 1 Set Phase indicating light shall be protected by 2 Amps MCB’s. - 3 Sets Battery charger with voltmeter of range 0-50 volts and ammeter of range 0-50 amps for trickle and boost charging. Breaker ON / OFF / TRIP indicating lights with control MCB’s. - 1 Set 24 V DC Shunt trip coil. - 1 Set240 V under voltage release. - 1 Set Breaker control switch - 1 Set Excitor field DC voltmeter and ammeter. Selector switch for Auto / Manual / Test Selector switch for engine control OFF/ON. Five push buttons – start, stop, reset, test and accept. Three indicating lamps “load on set’, ‘Load on Mains’ and “ Set fail to start’. 12 Window alarm annunciators panel with hooter, push buttons, aux. Contactors etc as required as per specification. Suitable rating battery charger as per specifications Temperature scanner (Messi Bus/Procon) Auxiliary contacts required for necessary interlocking of breakers. Incoming Air Circuit Breaker from 500 KVA Transformer 400 amps 4 pole electrically operated manually draw out type air circuit breaker with microprocessor release unit, for short circuit, over current and earth fault protection with adjustable setting as per specification and with following accessories : Digital load manager (conzerve – EM 6400 with RS-485 or equivalent) of accuracy class-I with 2 No. 1600/5 amps 15VA CTs. Phase indicating light shall be protected by 2 amps MCB’s- 3 Set Three Phase Over voltage relay (59) - 1 Set Breaker ON/ OFF/ TRIP indicating lights with control MCB’s- 1 Set 24 V DC Shunt trip coil. - 1 Set 240 V AC under voltage release. - 1 Set Auto-manual / test selector / switch - 1 Set Breaker control switch - 1 Set Breaker control switch - 1 Set Auxiliary contacts required for necessary interlocking of breakers. Three phase Voltage sensor relay shall be protected by 2 amps TP MCB’s, 1 Set Transient voltage surge supressor with suitable contactor shall be protected by 2 amps TP MCB’s. - 1 Set Digital voltmeter with inbuilt selector switch- 1 set Bus Bar : 400 A TPN electrolytic Al bus bar with heat shrinkable insulation sleeve Outgoings 200 Amps 4 Pole MCCB - 1 No. For AC Panel 200 Amps 4 Pole MCCB - 3 No. For Floor Panel 100 Amps 4 Pole MCCB - 5 No. 63 Amps 4 Pole MCCB - 3 No. Spare 200 Amps FP MCCB - 3 No. Bus Coupler 400 microprocessor release unit, etc complete as per specs. All outgoing feeders shall have suitable range of followings: All breakers shall be electrically interlocked as per schematic diagram. All ACB’s/ MCCB’s shall be suitable for 35 KA breaking capacity. All ACB’s/ MCCB’s shall be suitable for 35 KA breaking capacity. Three phase indicating lamps shall be protected by 6 amps SP MCBs. 1 No. 1000/800/ 5, 15 VA dual ratio CT’s shall be provided for APFCR on transformer's incomer. All outgoing shall have dual Electronic energy meter (EM-6438 with RS-485 or equivalent) with required number of CT's. Wiring and supply, installation of space heater, humidistat and control MCB’s shall be provided for all vertical sections. Suitable danger board shall be provided. All bus bar section/ backside panels shall have pad locking facility and hinged type door. 9 W fitting with CFL lamp, switch shall be provided in each vertical section. All Electronic Energy meter shall be pre wired for BMS connection upto central point within the panel with sheilded cable. DG & Transformer Changeover Panel as described above.
2
-
-
... More
FEEDER PILLAR PANEL FOR EXTERNAL LIGHTING. Supply, installation, testing and commissioning of cubicle type totally enclosed free standing, dust free, damp and vermin proof and water proof outdoor (IP 55) Feeder pillar fabricated out of 2mm thick CRCA sheet duly powder coated and including supply & fixing the following items and interconnections, wiring with suitable size wires/ cables and including all civil works like excavation, PCC, brick work pedestal, plastering, refilling etc. and as per specifications as required. 1 No. 100 Amp four pole Moulded Case Circuit Breaker (Ics value 25 KA) 150 Amp TPN busbars of high conductivity electrolytic quality aluminium alloy. INSTRUMENTS & ACCESSORIES 1 No. 96x96 analogue type Voltmeter suitable range for 3 phase, 4 wire operation with LED display and selector switch withcontrolled by 3 sets of 2Amp MCB . 1 No.96x96 analogue typeAmmeter of suitable range ( 0 to 63Amp), for 3 phase 4 wire operation with LED display and selector switch 3 Nos of LED type phase indicating lamps (RYB) with controlled by 2Amp MCB . 1 No.6A, 2 pole Auto/OFF/Manual (2 way with OFF) se lector switch. 2 Nos. of push button actuator Outgoing 1 (6 PM - 6 AM ) TPN DB 6 No. 10 amps SP MCB per phase as outgoing with 3 No. 40 amps DP RCCB of 30 mA leakage current plus 1 No. 40 amps TP Contactor, push button etc controlled through 0-24 hour timer, photo sensor and 1 No. 40 amps 4 pole MCB as incomer). TPN DB 6 No. 10 amps SP MCB per phase as outgoing with 3 No. 40 amps DP RCCB of 30 mA leakage current plus 1 No. 40 amps TP Contactor, push button etc controlled through 0-24 hour timer, photo sensor and 1 No. 40 amps 4 pole MCB as incomer).
2
-
-
... More
Fidder pillar as discribed above UPS PANEL 1 No. 200 Amps FP MCCB with following accessories: VAF digital electronic meter with inbuilt selector switch and 200/5 Amps suitable VA, CL 1 CTs . -1 Se Phase indicating light shall be protected by 2 Amps SP MCB's -3 Set 200 Amps FP MCCB - 1 No. 300 Amps TPN Aluminium bars with heat coloured shrinkable insulation sleeve - 1 Set. 63 Amps FP MCB - 6 Nos. 63 Amps FP MCB - 5 Nos. Spare All MCCB's shall be of 25 KA (Ics) breaking capacity. All MCB's shall be of 10 KA breaking capacity.
2
-
-
... More
UPS Panel described as above AC / HVAC PANEL 1 No. 800 Amps TPN MCCB with following accessories: VAF digital electronic meter with inbuilt selector switch and 800/5 Amps suitable VA, CL 1 CTs . -1 Set Phase indicating light shall be protected by 2 Amps SP MCB's -3 Set 800 Amps TPN - 1 No. 1200 Amps TPN Aluminium bars with heat coloured shrinkable insulation sleeve - 1 Set. 400 Amps TPN MCCB - 4 Nos. 200 Amps TPN MCCB - 10 Nos.63 Amps TPN MCB - 8 Nos. 32 Amps DP MCB - 1 Nos. Spare 63 Amps TPN MCB - 1 Nos. Spare All MCCB's shall be of 25 KA (Ics) breaking capacity All MCB's shall be of 10 KA breaking capacity..
1
-
-
... More
AC / HVAC Panel described as abov Supply, Receiving, Unloading, Shifting, Installation Testing & Commissioning of outdoor type Transformer ONAN type with copper winding having following continuous 1010 KVA rating, 11 /0.415 KV 3 Phase 50 Hz, Vector group Dyn-11, Off load Tap Changer with tapings in steps of ± 2.5%, ± 5%, 7.5% with oil conservator, silica gel breather having connecting terminals on HV side suitable for connecting 3Cx 240 Sqmm HT cable, having cable termination box on secondary voltage side suitable for terminating 4 No 240mm2 XLPE Armoured cable. Transformer shall be confirming to Energy Efficiency Level 2 as per Latest IS 1180( Part 1 & 2), IS:2026, on Brick /CC/RCC platform with all fittings, accessories, filled with filtered transformer oil including testing and commissioning etc.. Including foundation of Transformer, etc. complete as per technical specifications.
2
-
-
... More
Supply, installation, testing and commissioning of 180 AH capacity 24 volts DC hermetically sealed maintenance free lead acid batteries duly charged including battery charger unit with provisions of Boost Charing, and Float charging. Suitable for 240 V, including DC DB single phase + 10% AC, 50 Hz supply as per specifications .
2
-
-
... More
Supply and fixing in position the approved “Shock Treatment Charts” written in English and Local Language. These charts shall be framed in teak wood frame and covered with glas
4
-
-
... More
Fencing of sub-station by wire woven net, height 1.8 mts. And 50 X 50 mm 2.5 meter G.I.angle with transformer pad.
200
-
-
... More
Supply and fixing of in position the fire extinguishers dry chemical powder (ABC) 5 kg capacity.
2
-
-
... More
Supply and fixing of in-position the fire extinguishers dry chemical powder (ABC) 2 kg capacity.
2
-
-
... More
Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
4
-
-
... More
Supply and fixing in position 1000 mm wide rubber matting of 11 kV grade as per electricity rules. Thickness of rubber mat shall be not less than 12 mm.
8
-
-
... More
Supply of fire buckets 5 nos. in each set duly filled with fine sand and fixed on an angle iron frame as per requirement of local authorities. Fire buckets shall be painted red from outside and white from inside with additional handle at the bottom.
2
-
-
... More
Supply and fixing position the approved single line diagram framed in 1000 x 800 mm size glass frame and installed in main switch room.
2
-
-
... More
Supply of First Aid box of approved make
2
-
-
... More
Supply of tool kit with 1 pair 11 kV rubber hand gloves of approved make.
2
-
-
... More
60 KVA Transformer 750 V/415 V, 3-Phase, 4 wire vector configuration Star-Star to RDSO Specification No. RDSO/PE/SPEC/AC/0080 ( REV 1) 2007.
8
-
-
... More
Relocation OF 500KVA TRANSFORMER(EXISTING)
1
-
-
... More
SUPPLY AND INSTALLATION OF DG SET WITH ACCESSORIES Supply Installation, testing & Commissioning of Diesel Generating Set Three phase, water cooled with AMF control panel 250 KVA 415V.
2
-
-
... More
Exhaust Piping Providing, fixing & installing MS exhaust pipe 6 mm thk and all fixing accessories and hardwares. The exhaust pipes shall be Painted with high temperature paint & insulated with 75 mm thick mineral wool (density 150 kg/m3) insulation wrapped in chicken mesh and clad with 26 gauge aluminium sheet including all MS epoxy painted support structural as required. 200 mm dia
80
-
-
... More
SUBHEAD-VII TELEPHONE & ETHERNET (DATA CABLE ) Supplying and laying 5 Pair Telephone Cable External Duct PE Unarmoured CW 1128 Conductor Dia. Nom 0.5 mm, No. of Pairs 5, Solid bare copper conductors Petroleum jelly water blocking compound Capacitance unbalanced (Max) 275pF/500m code:-CA EXGPO5/500 etc. as required.
750
-
-
... More
Supplying and laying CAT6 Direct Burial Outdoor Cable | Double Jackets 23AWG Copper Waterproof Exterior Network Cable Black External Cable 550MHz Solid Copper etc. as required.
650
-
-
... More
Supplying, installation, testing & commissioning of approved make horizontally mounted coupled motor (Eff-1) 60hp, 2900 RPM, 3 Ph 415 V with mechanical seal pump delivery of 2280 litres per minute against total head of 70 meter so as to ensure a minimum pressure of 3.5 Kg/Cm2 at the highest. The impeller shall be closed type and accurately balanced dynamically. The pump shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel, automatic air release valve, pressure gauges (combination suction gauge, 3½” dial type with ¼” cock and lever handle - 1 no, discharge gauge, 3½” dial type with ¼” cock and lever handle - 1 no.) i/c coupling, coupling guard, base channel foundation &matching flanges etc. as required as per specifications. The fire pump set as per NFPA –20 specifications.
2
-
-
... More
Supplying &installation of approved make diesel engine driven firefighting pump water cooled 65 BHP 2150 RPM engine, fuel tank 200 Ltr (empty), accessories, matching flanges, base frame, ARV , fuel gauge, exide12 Volt battery & charger, lugs & cable between battery & charger. The pump capacity of 2280 litres per minute at total head 70 meters, automatic air release valve, pressure gauges (combination suction gauge, 3½” dial type with ¼” cock and lever handle - 1 no, discharge gauge, 3½” dial type with ¼” cock and lever handle - 1 no.) as required. All above equipment's are mounted on common base plate. The fire pump set as per NFPA –20 specifications
1
-
-
... More
Supplying, installation, testing & commissioning of approved make jockey pump horizontally mounted coupled motor (Eff-2) 5.5hp, 2900 RPM, 3 Ph 415 V with mechanical seal pump, delivery of 180 litres per minute against total head of 70 / 88 meter so as to ensure a minimum pressure of 3.5 Kg/Cm2 at the highest. The impeller shall be closed type and accurately balanced dynamically. The pump shall be of cast iron, impeller shall be of bronze and shaft shall be of stainless steel. i/c coupling, coupling guard, base channel foundation & matching flanges etc. as required as per specifications.
2
-
-
... More
Providing laying, testing and commissioning of 'C' class heavy duty MS pipe confirming to IS 1239/3589 i/c fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gaskets and welding etc. and fixing the pipe on wall/ceiling with suitable hangers, clamps, supports, as required and painting with two or more coats of synthetic. Enamel paint of required shade complete as directed by Engineering-in-Charge. 200 mm dia
25
-
-
... More
150 mm dia
15
-
-
... More
100 mm dia
26
-
-
... More
80 mm dia
135
-
-
... More
50 mm dia
3
-
-
... More
Providing, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 200 mm dia
2
-
-
... More
150 mm dia
7
-
-
... More
100 mm dia
1
-
-
... More
80 mm dia
1
-
-
... More
Providing, installation, testing and commissioning of dual plate nonreturn valve of following sizes confirming to IS 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required 200 mm dia
1
-
-
... More
150 mm dia
2
-
-
... More
100 mm dia
2
-
-
... More
80 mm dia
1
-
-
... More
Providing & fixing 100mm dia bourden type, Stainless steel dial type pressure Gauge (0 - 16 Kg ) range, 3 / 8 " BSP bottom entry on Pump Delivery Line complete with Ball valve
8
-
-
... More
Providing and fixing air vessel made of 250mm dia, 8mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gunmetal wheel valve, with required accessories, pressure guage and painting with synthetic enamel paint of approved shade as required
1
-
-
... More
Providing and fixing Pressure switch in the MS pipe Line including connection etc. as required. Capacity 4.5 kg.
4
-
-
... More
Providing, fixing, testing and commissioning of installation control valve of Cast iron body and brass/bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical going bell to sound continuous alarm when the Wet riser/Sprinkler system activates, pressure gauges, emergency, releases, strainer, pressure switch cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size flanges, orifice plate, gasket etc. of size 150 mm dia and obtaining NOC from local bodies etc required.
1
-
-
... More
Providing, installation, testing and commissioning stainless steel strainer
fabricated out of 1.6 mm thick stainless steel sheet with 3 mm dia holes with stainless steel flange. 80 mm dia
2
-
-
... More
100 mm dia
2
-
-
... More
Providing, fixing, testing and commissioning of Electronic type water level indicator with LED Panel & all control wiring.("Make-Technica / Waaree")
2
-
-
... More
Providing, fixing, testing and commissioning of dual plate C.I. wafer type check valve of pressure 16 Kg/sq.cm with flanges, Nut,bolts & washers, painting etc. complete as required 150 mm dia
4
-
-
... More
Providing, fixing, testing and commissioning of CI Sluice valve PN 16 rating with flanges, Nut, bolts & washers, painting etc. complete as required 150 mm dia
2
-
-
... More
SITC of floor mounted dust and vermin proof compartmentalised cubical type main fire pump house panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear . Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors and having accessories ( Group -I ) as below: Incomer 320 Amp. TPN MCCB (adj.O/L) with Extended ROM, 35 kA, with Thermal magnetic release, Digital Ammeter, Voltmeter, Selector switches,CT, Indicating Lamps, 400 Amps Alum. Bus bar with with heat shrinkable sleeves. Out going (a) 200 Amp. TPN MCCB(adj.O/L) with Extended ROM, 35 kA, with Thermal magnetic release, Digital Ammeter, Voltmeter, Selector switches,CT, Indicating Lamps for 'ON', 'OFF', 'TRIP' 1 no. star Delta Starter of 75 HP with thermal over load relay, timer, push buttons, Auto / Manual selector switch, Single phase preventor - 2 Sets (b) 63 Amp. TPN MCCB (adj.O/L) with Extended ROM, 25 kA, with Thermal magnetic release, Digital Ammeter, Voltmeter, Selector switches, CT, Indicating Lamps for 'ON', 'OFF', 'TRIP' 1 no. Star Delta / DOL Starter of 5 - 15 HP with thermal over load relay, timer, push buttons, Auto / Manual selector switch, Single phase preventor - 1 Set (c) One no. Diesel Engine Auto Starting kit with Auto . Manual selector switch & 3 attempt starting device, timers, relays, Indicating lamp for High / Low Lub. Oil pressure, High water temperature and engine ON indication, Battery charger, suitable for 12 V / 24 V DC with trickle / boost selector switch, DC ammeter & voltmeter (d) System controller to control Operation Main Electric pumps, Diesel pump, jockey pump in sequence as per specs. Consisting of relays, timers, sensors, annuciation window for fault indication.
1
-
-
... More
FIRE EXTINGUISHERS. Providing and fixing of carbon-dioxide type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube 30 cm long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge Capacity 4.5 kg
5
-
-
... More
Providing and fixing of ABC Power type fire extinguishers consisting of
welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube 30 cm long high pressure discharge hose, discharge nozzle, suspension bracket. Conforming to IS: 15683 finished externally with red enamel paint fixed to wall with brackets complete with internal charge Capacity 6.0 kg
5
-
-
... More
Supplying and installing at approved location approved make fire buckets of 24 gauge galvanized steel sheet confoming to IS: 2546, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters “FIRE” in black and gold. Cost shall be inclusive of providing MS stand duly painted over a coat of primer. (Set of 4 Buckets)
2
-
-
... More
Providing and fixing of Mechanical Foam Type 50 Litres.
1
-
-
... More
EXTERNAL HYDRANTS , PIPING & ACCESSORIES Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal
55
-
-
... More
Providing and fixing hose cabinet of size 600x600x450mm made of 2 mm thick MS sheet with 3 mm thick float glass doors in front painted "FIRE" in red paint i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2NoS. 63∅x15m HOSE , 1 no branch pipe mounted on wall or raised brick platform& duly painted with post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant, as directed by Engineer-in- charge
55
-
-
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for uitable dia MS pipe connection conforming to IS 904 as required 2 way-100 mm dia M.S. Pipe
2
-
-
... More
4 way - 150 mm dia M.S. Pipe
4
-
-
... More
Providing laying, testing and commissioning of class 'C' heavy duty MS pipe confirming to IS 3589/1239 including fittings like elbows, tees, flanges, reducer, jointing with nuts bolts, gasket and welding etc. and supports, as required and painting with tow or more coats of synthetic enamel paiing of required shade complet as directed by Engineer-iin-charge. 200 mm dia
225
-
-
... More
150 mm dia
1350
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required. 200 mm dia
10
-
-
... More
150 mm dia
10
-
-
... More
Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 200 mm dia
2
-
-
... More
SECURITY SYSTEM Supply, Installation, Testing & Commissioning of 3D UVSS. The UVSS should have dual imaging feature (3D footprint) from left and right view (high resolution color images) of the complete underbody of any vehicle passing over it using dual Area-scan camera based technology. The system should give high resolution Color left and right composite images of the vehicle’s underside. The UVSS must also provide Morph creation feature to see real life 3D footprint of the underside. System should produce undistorted composite stiched image of vehicle; UVSS should be an area scan based system with minimum 20,000 transactions storing capacity with suitable i7 or higher CPU computer; System should allow to view previous transactions. Main camera Resolution: Minimum 1900X1200 pixels or better; ANPR camera to be provided, License plate camera Resolution: 1MP minimum; Driver camera Resolution: 1MP or higher; LED lights with UVSS are required to produce high quality clear image, LED shall be rated for minimum 1,00,000 operating hours, IP67 rated housing for camera & LEDs; Processor: The system should be supplied with PC with minimum required hardware and software configuration of Intel Processor i7-h Genertion or higher, 3.2GHz or better,Operating System : Linux , Monitors minimum 22"or better monitor/dislay. It shall be complete with all required accessories. CE, FCC, ROHS, CMMI Level 5 certificate to be provided. Make (Gatekeeper,Vehant,Tescon,Kritikal)
1
-
-
... More
Security Room - Supply, Installation, Testing & Commissioning of XRC 60-40P SMALL PARCEL & BAGGAGE X-RAY IMAGING SYSTEMTunnel Size : 610 mm x 420 mm Dimensions : 1472 mm x 1270 mm x 870 mm (L x H x W) Approx. Weight Unpacked : ~455 kg (1003 lbs.) Conveyor Height : 730 mm from the floor Conveyor Load Capacity : 165 kg (364 lbs.) Evenly Distributed System Power : 110/220V AC ± 10% 50/60 Hz, 5amp max. Conveyor Speed : 0.20 m/sec. Forward or Reverse Machine length (excluding rollers) not be more than 1500 mm Operating System should be Linux or any open source only Real-time Zoom facility available: To zoom upto 2X on a real time scan without stopping the belt Operator keyboard have IP 43 Safety Certificate X-ray Scanning machine have IP 20 Certificate Machine have both 4 and 6 Color Imaging option MAKE-(smiths detection, XRC, Astro physics )
1
-
-
... More
DFMD
1
-
-
... More
HHMD
1
-
-
... More
Gate Security - SITC of Motorised Vehicle Barrier complete with Control Unit and integrated Two channel Loop Detector and Vario Boom of 3.5Mtr max 1.3 sec opening / closing time. Quoted price shall be inclusive of cabling between the Boom Barriers and the motor control center, PE Sensor, card reader, push button, loop detector, controller & all necessary accessories Approved Makes Elka/Magnetic/Skidata
2
-
-
... More
ANPR Camera with license & controller having accuracy up to 95% @60Kmp with IR Illuminator for night vision, Image Sensor-1/2.8” 2 Megapixel progressive CMOS (0.9070 cm),IR-IR Range of 60 mtr., Smart IR,Lens-2.7mm~13.5 mm Motorized,Motion Detection-OFF/ON (4 areas, rectangular),Power Consum ption-Basic: 2.3W (12V DC); 2.9W (PoE) Max. (WDR + IR intensity +Intelligence); 6.6W (12V DC); 7.7W (PoE),Weatherproof St andard-IP-67, IK-10 (Optional) with mouting pole
1
-
-
... More
Supply, installation, testing and commissioning of hydraulic K-4 Rated Crash Bollard or better ,Height -900 mm, Dia-273 mm to prevent unauthorized access , IP67 Certified. Suitable pit along with control panel to be the part of the supply. Push button Included. Reflective stips colour Red/Orange, Designed for Intensive usage. Emergency manual lowering feature in case of Power failure. Certifications- K4 Standard Compliant or better in accordance with IWA 14:2013. Certifications- IP 67 Certified, Environmental test certified, CE Certified Make (Speedgatz, Deltascintific, synergyacess, kaba)
4
-
-
... More
CCTV Camera & Storage, Video Management Software Supply of 1080p IR Indoor camera with 1/2.8‑inch CMOS, Total sensor pixels 1920 (H) x 1080 (V); 30fps Sensitivity – Measured according to IEC 62676 Part 5 (1/30, F1.6), Color 0.06 lx, Mono 0.02 lx, With IR 30 Meter 0.0 lx, 128dB WDR, H.265; H.264; M- JPEG, Automatic Electronic Shutter CCTV Camera & Storage, Video Management Software(AES);
Intelligent Dynamic Noise Reduction, Intelligent Defog, Rule based alarms and tracking, Line crossing, Enter / leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Speed, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks) Privacy Masking, Pixel counter, Memory card slot, IR Range 30mtr, Automatic Varifocal 3.2 to 10 mm, Alarm Input 1/1, Audio Input/output, RJ45, G.711, Audio Streaming Full-duplex / half duplex, ONVIF Profile S, G & T, PoE, CE, FCC, UL certified. SD
card support up to 2TB. FTP, Dropbox and e-mail applications MAKE LIST- (Bosch / Mobotix / Geutebruck / Avigilon)
14
-
-
... More
Supply of 1080p IR Outdoor camera with 1/2.8‑inch CMOS, Total sensor pixels 1920 (H) x 1080 (V); 30fps Sensitivity – Measured according to IEC 62676 Part 5 (1/30, F1.6), Color 0.06 lx, Mono 0.02 lx, With IR 30 Meter 0.0 lx, 128dB WDR, H.265; H.264; M- JPEG, Automatic Electronic Shutter (AES);
Intelligent Dynamic Noise Reduction, Intelligent Defog, Rule based alarms and tracking, Line crossing, Enter / leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Speed, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks) Privacy Masking, Pixel counter, Memory card slot, IR Range 30mtr, Automatic Varifocal 3.2 to 10 mm, Alarm Input 1/1, Audio Input/output, RJ45, G.711, Audio Streaming Full-duplex / half duplex, ONVIF Profile S, G & T, IP66, IK10, PoE, CE, FCC, UL
certified. SD card support up to 2TB. FTP, Dropbox and e-mail applications MAKE LIST- (Bosch / Mobotix / Geutebruck /Avigilon)
14
-
-
... More
Supply of all-in-one recording, viewing and management solution for network surveillance systems with included 150 camera license & expandable upto 254 Camera, 5 WS Licensed Pre-installed, preconfi gured IP storage solution, with RAID-5/RAID-6 protected, Dedicated storage operating system delivers robust , secure operation, Hot-swappable hard drives, Advanced user and alarm management,Intel® Xeon® E-2226GE (12 MB Intel Smart Cache, 3.4GHz) Processor, 16 GB DDR4- 2666 2Rx8 ECC UDIMM memory installed, 2U rack mount, : 3.5-inch SATA 3; should Supported
18TBx8 (144TB) per HDD slot maximum supported, 12Gb /s SAS RAID Card, 6 USB ports; Intel onboard graphics (Three digital outputs), 16 Type of Video analytics included for each Cam, Windows Server IOT 2019 for storage standard (64-bit),UL, CE Certified. 2 x RJ45 Gigabit Ethernet LAN ports (teamed); 1 IPMI BMC port. Operating temperature (°C) 10 - 35°C; Operating relative humidity, noncondensing (%) 8 - 90%. MAKE LIST- (Bosch/Mobotix/Geutebruck/Avigilon)
1
-
-
... More
Supply of Enterprises 12TB , 24x7 operation HDD for data storage etc as per requirement. MAKE- (Seagate)
4
-
-
... More
Supply of 24 port Layer-2 Managable Giga POE budget 320 Watt or more switch 4 sfp port Loaded MAKE- (Dlink)
6
-
-
... More
Suppy of 42U Server Rack with all accessories MAKE-(Perfect)
1
-
-
... More
Supply of 9u switch encloser with all required accessories ie, cable manager, MCB, FAN Hardware etc as per req. MAKE- ( Perfect)
4
-
-
... More
Suppy of 24 port patch pannel with all accessories MAKE- (Dlink)
8
-
-
... More
Supply of 12/24 port single mode Rack Mount LIU etc as per req . MAKE- (Dlink)
8
-
-
... More
Supply of LS TO SC 3 meter Fiber Patch cords as per req. MAKE-(Dlink)
15
-
-
... More
Supply of Work Station with Up to 12th Gen Intel® Core™ i9-12900K 16 Core (8P+8E) Processor (125W), up to RTX A6000 or 350W GPU support WITH DUAL DIP, HDMI OUT (NVIDIA and AMD Cards)
storage HDD 1 TB, RAID support 0, 1, up to 128GB or up to 4400MHz ECC and non-ECC DDR5 memory
MAKE- ( H P)
1
-
-
... More
Supply of of 55 inch commercial LED with 24/7 operation supported Display with Complete Accessories MAKE- (Samsung)
1
-
-
... More
Supply of Cat6 patch Cord 1 meter as per required MAKE- (Dlink)
40
-
-
... More
Supply of of Cat 6 UTP Cable MAKE - (Dlink)
12
-
-
... More
Supply of of Armoud 6 core sinngle mode optical fiber Cable MAKE- (Dlink)
32
-
-
... More
Supply of 3 core 1.5 smm power cable MAKE-(Polycab)
55
-
-
... More
Supply of 1 inch PVC Conduilt/batten etc as per req MAKE- (AKG)
32
-
-
... More
SITC of Electric Vehicle Supply Equipment(EVSEs) is a wall mounted box that supplies electric energy for recharging of electric vehicle batterie. Also EVSEs have a safety lockoul feature that does not allow current to flow from the device until the plug is physically inserted into the car EVSEs can be customized with added features like: Authenlication. Integrated payment gateways, Software for remote monitoring. MAKE-(E-FUEl ,ABB ,SCHNIEDER) AC "Slow" Charging: The home private chargers are generally used with 230V/15A single phase plug which can deliver a maximum of up to about 2.5KW of power. The EVSE supplies AC current to the vehicle's onboard charger which in turn converts the AC power to DC allowing the battery to be charged.MAKE-(E-FUEl ,ABB ,SCHNIEDER)
2
-
-
... More
DC "Fast" Charging: DC current is sent to the electric car's battery directly via the charge port. FC chargers (usually 24 KW or more) can supply 50 or more kilometers of range per hour of charging. The fast chargers would generally be used as a top-up, rather than fully charging vehicles. These are important for: cab companies and corporate users who have a fleet of electric vehicle.AS per given specification & features like: (a) Terra DC Wallbox 24Kw DC Fast Charger with 1 no. CCS2 (b)Charger Connect + OCPP 1.6 ( in case of DC Chargers ) (c)White labelled CMS Solution with year subscription
1
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m ,as directed by Engineer - in - Charge All kinds of soil :
101.66
-
-
... More
Ordinary Rock
39.58
-
-
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed50 meter beyond 1 m from cutting edgeOrdinary RockAll kinds of soil :
428.4
-
-
... More
Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and
compacting, etc. complete. (Bd-A-12/264)
108.84
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
31.78
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5.1.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
26.6
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
4389
-
-
... More
Providing and fixing mild steel grill work for windows/ ventilators of 20 Kg/Sqm. As per drawings including necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting, etc. complete.
(Bd-U- 1/537)
9.08
-
-
... More
Steel work welded in built up sections / framed work , including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer using structural steel etc . as required. In gratings , frames , guard bar, ladder, railings , brackets , gates and similar works.
2980
-
-
... More
Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete. (Weight of 5.5
kg/sq.m.).
301.6
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
59.48
-
-
... More
12 mm cement plaster of mix : :6 (1 cement: 6 coarse sand)
326.6
-
-
... More
12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand)
190
-
-
... More
Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down
etc. complete.
190
-
-
... More
Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding
base coats of white wash) etc. complete.
190
-
-
... More
Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including
consolidation, surcharging, etc. complete.
328
-
-
... More
Transportation as per STATEMENT VI Including loading, unloading and stacking Earth (4.8 Cum) lead 15 Km
348
-
-
... More
Electromechnical Items Screen (Manual) of size 1.65 m length x
0.5 m width of SS 304 MOC and Manual hand rake for cleaning screen of SS handle 1 m in length and cleaning area of 6 nos 5 mm SS rod of total length 200
mm straight and 50 mm of 90 degree
1.66
-
-
... More
Grit pump Supplying Non-clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and given duty points as below 1 HP (Up to 9000 LPH)
2
-
-
... More
Raw Sewage Pumps Supplying Non-clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and
given duty points as below 1 HP (Up to 9000 LPH)
4
-
-
... More
TTU Feed pumps Supplying Non-clog Submersible Pump suitable for sewage/ Liquid waste application with standard MOC and given duty points as below 1 HP (Up to 9000 LPH)
4
-
-
... More
Pressure Sand Filter of FRP / MSEP vessel with suitable thickness to withstand a water pressure including MPV or 5 Valve system and PVC / UPVC / MSEP interconnecting and underdrain piping including fittings, with standard filter media layer with minimum depth of filter sand 1.0 m supported by gravels. The piping arrangement should provide sufficient pressure for backwash operations and avoid loss of sand during backwash operation. Suitable openings to be provided to ease addition and Dia 0.9 m x 2 m minimum height
2
-
-
... More
Activated Carbon Filter of FRP / MSEP vessel with suitable thickness to withstand a water pressure including MPV or 5 Valve system and PVC / UPVC / MSEP interconnecting and underdrain piping including fittings, with standard filter media layer with minimum depth of Activated Carbon 1.0 m supported by gravels. The piping arrangement should provide sufficient pressure for backwash operations and avoid loss of Activated carbon during backwash operation. Suitable openings to be provided to ease n Dia 0.9 m x 2 m minimum height
2
-
-
... More
NaOCl Chlorinator Pump Diaphragm Type / peristaltic type / Solenoid Max Flow Rate Upto 10LPH Power Source Electric Phase Single Material PP / PTFE(Teflon) Voltage 230 Volt Frequency Mixing Tank of 100 Ltrs capacity
200
-
-
... More
Dosing Pump
4
-
-
... More
Control Panel Designing, Supplying, Installing, commissioning
& testing of PLC Panel. Including PLC with CPU & Power supply unit, power supplyb cables interfacing cards, interfacing cables, wireless modules with 25% extra
2
-
-
... More
Supplying and erecting Fully Automatic Star Delta starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element, and ON - OFF push buttons, with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. 7.5 HP & Up to 12.5 HP
12
-
-
... More
[L.T. SWITCHGEAR AND PROTECTION] Main power supply cable 3 core PVC insulated, PVC sheathed copper conductor flat submersible cable Supplying and erecting, Flat flexible
submersible cable with, Copper Conductor, PVC insulated, and PVC 3 core 16 sq mm
50
-
-
... More
Power cables Aluminium conductor 4 Core, XLPE /
PVC insulated & armoured cable Supplying and erecting, XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Four core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete erected on wall
/ on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved 4 Core 6 sq mm MJP MECH/ ELECT/ SSR/ 2021-22 SECTION 12 - CB [ L.T. CABLE ] Item no. CB 6
150
-
-
... More
Control Cables Copper conductor PVC insulated, Unarmoured control cable Supplying and erecting Un-armoured control cable with ISI mark stranded / solid copper conductor 1.1 kV grade complete erected on wall / panel or in provided trench in an approved manner. 4 core 2.5 sq mm MJP MECH/ ELECT/ SSR/ 2021-22 SECTION 12 - CB [ L.T. CABLE ] Item no. CB 8
150
-
-
... More
Plumbing Items Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit 1) 10% of cost of pipes shall be considered for cost of PVC specials for estimate purpose only.
One coupler and required cement solvent shall be provided with each full length pipe cost of which is included in rates below. MJP/ SSR/ 2021-22 / SECTION – I(II) P.V.C.
PIPES, Page no.77 Raw Sewage pump to TBF Distribution Main header 63 mm. PVC Specials- 10%
60
-
-
... More
Distribution 63 mm. PVC Specials- 10%
30
-
-
... More
TBF collection to FFT (gravity) Main header 75 mm. PVC Specials- 10%
90
-
-
... More
collection tributory 63 mm. PVC Specials- 10%
20
-
-
... More
TTU Plumbing 63 mm. PVC Specials- 10%
40
-
-
... More
TBF distrinution 63 mm. PVC Specials- 10%
20
-
-
... More
Labou r Plumber
12
-
-
... More
Helper
24
-
-
... More
LABOUR & MACHINERY , Page no. 14 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Sluice valves - PN -1 (Without by pass) Raw Sewage pump 65 mm.
4
-
-
... More
Filter Feed Pump 65 mm
4
-
-
... More
PIPES APPURTENANCES , Page no. 132 Providing and supplying ISI mark CI D/F reflux valves (non-return valves) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) Without by pass arrangement -PN -1 Raw Sewage pump 65 mm
4
-
-
... More
Filter Feed Pump 65 mm MJP/ SSR/ 2021-22 / SECTION - I(XII) :
PIPES APPURTENANCES , Page no. 131
4
-
-
... More
Bio media Items Supplying of Specially designed container for holding Filter media including Lightweight Expanded Clay Aggregates size ( 8-30 mm) and Bio media including mixture of woodchips Vermicompost, cocopeat and bacterial culture with special worms per designed quantity including transportation & fixing in position as Market rate
288
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements