Public Works Department Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 29,04,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_12337_1Bid Award Id
ViewTender No
E-Tender 98 of PW(RnB) Div Kargil 2023-24Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
ALL KINDS OF SOIL 40%
6543.36
1205744
184.27
... More
Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr.
4907.52
952942
194.18
... More
Disposal of Excavated Material (Earth/unserviciable) including boulders by mechanical transport from site of work to disposal site outside the MC area through a lead of 10 kms including loading, unloading and stacking all complete.
9815.04
3326709
338.94
... More
STONE SOLLING Dumping of stone including cost of stone (in horizontal on level)
130.64
78957
604.39
... More
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) (crushed)
130.64
717430
5491.66
... More
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (crushed)
324.61
1979614
6098.44
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. (Use Of Portland Pozzolana Cement Is advised as Per Green Building Guidelines OR 25% replacement of Ordinary Portland cement with fly ash by weight of cement used in structural concrete.)
816.32
512208
627.46
... More
Reinforced cement concrete work in Footing , Pedestal ,Columns , beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with M25 (1:1:2) (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)
1313.77
14616059
11125.28
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
249615.61
24227691
97.06
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
514.04
5462661
10626.92
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
61684.8
5987126
97.06
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footing bases of column
1649.9
384080
232.79
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.
1482.69
894996
603.63
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.
2494.46
1113227
446.28
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
2750.9
1551782
564.1
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and
string courses etc.
1216.99
618888
508.54
... More
Providing and laying autoclaved aerated cement blocks masonry with 100mm/150mm/200mm /300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete including providing of 75mm Cavity in Walls as per architechtural drawing and as per direction of Engineer-in-Charge.
506.04
5932878
11724.13
... More
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal
size)
258.55
2625976
10156.55
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) First class teak wood
4.62
781483
169152.18
... More
Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class teak wood 35 mm thick shutter)
68.15
287708
4221.7
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Second Class teak wood
102.23
349391
3417.7
... More
Providing and fixing factory made uPVC AIS or FENISTA or KOEMMERLING make white/wood Finish colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with 0.25 and 0.35 VLT may be introduced.)
-
-
-
... More
Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).
391.33
4557155
11645.3
... More
Providing and fixing factory made uPVC of AIS or FENISTA or KOEMMERLING make white/Wood Finish colour fixed glazed windows/ventilators comprising ofuPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with 0.25 and 0.35 VLT may be introduced.
-
-
-
... More
Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
3.72
40575
10907.33
... More
Providing and fixing DGU ( with 0.25 SHGC and 0.35 VLT glazing in uPVC window, ventilator shutters and partitions etc. with proper sealing as per norms etc. complete as per the architectural drawings and the directions of engineerin- charge. ( Note : DGU with 0.25 SHGC and 0.35 VLT)
-
-
-
... More
TOUGHENED DGU glass panes filled with inert gas of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS / HNGIL make as approved by engineer in charge
817.75
834620
1020.63
... More
Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 Coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.
926.99
702417
757.74
... More
CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) (PPC or cement with 25% flyash is recommended.)
5477.81
1812169
330.82
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
3834.47
616966
160.9
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (Note: It Should have Low or No VOC as per Green Building guidelines)
3834.47
710105
185.19
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. (Note: It Should have Low or No VOC as per Green Building guidelines)
-
-
-
... More
New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
(Note: It Should have Low or No VOC as per Green Building guidelines)
926.99
172077
185.63
... More
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (Note: It Should have Low or No VOC as per Green Building guidelines)
212.97
15744
73.93
... More
Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete.
212.97
22681
106.5
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. (Note: It Should have Low or No VOC as per Green Building guidelines)
212.97
38724
181.83
... More
Providing & Fixing finished brass hanging type floor door stopper with necessary screws etc complete.
50
11094
221.88
... More
Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm (Kajaria/Somany/Cera or Any approved Brand as per Engineer In charge)
1338.5
2464700
1841.39
... More
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with:
111.67
345071
3090.1
... More
P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete.
470.45
652222
1386.38
... More
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
83.61
198649
2375.91
... More
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (Note : It should have flush rate of with Flush rate of 4/2 Litre per Flush or less ) (Dual flush 4/2L WC cistern with bottom inlet for compact back to wall Rimless toilet)
-
-
-
... More
Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. JAGUAR/CERA Make
21
102506
4881.25
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied:
-
-
-
... More
W.C. pan with lSI marked white solid plastic
seat and lid. JAGUAR/CERA Make
2
15087
7543.75
... More
Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:
-
-
-
... More
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps JAGUAR / CERA/HINDWARE Make
23
91856
3993.75
... More
P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm
23
30618
1331.25
... More
P/F Stainless steel 304 Grade Square Shaped Sink Vessel Sink (21 X 18 X 8) inches (Steel) of approved brand and manufacture Hindware/Jaguare/Imperio/ Kaff and any other approved brand as per Engineer Incharge
5
19968
3993.75
... More
Providing and fixing soil waste & vent pipe (Prince or any other appoved brand as per Engineer In Charge
-
-
-
... More
PVC Pipe. 110mm dia (10 feet unit Length)
50
64344
1286.88
... More
PVC Pipe. 75mm dia (10 feet unit Length)
50
48812
976.25
... More
PVC Bend 110mm dia
30
6656
221.88
... More
PVC Bend 75mm dia
30
6656
221.88
... More
PVC Tee 110mm dia
30
7987
266.25
... More
PVC Tee 75mm dia
30
7987
266.25
... More
PVC Collar 110mm dia
25
4437
177.5
... More
PVC Collar 75mm dia
25
3328
133.13
... More
PVC trap 110mm dia
25
9984
399.38
... More
PVC trap 75mm dia
25
8875
355
... More
PVC Socket 110mm dia
25
4437
177.5
... More
PVC Socket 75mm dia
25
4437
177.5
... More
PVC door junction 110mm dia
20
6212
310.63
... More
PVC door junction 75mm dia
20
6212
310.63
... More
Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
-
-
-
... More
PN-16 pipe , 25mm OD(SDR-7.4)
350
134501
384.29
... More
PN-16 pipe , 32mm OD(SDR-7.4)
300
132831
442.77
... More
Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required.
-
-
-
... More
A L-Drops for room door
160
120700
754.38
... More
T- Bolt for doors
160
39760
248.5
... More
Handles for door
420
223650
532.5
... More
P/F CP brass toilet paper holder including cost of wodden,PVC,play etc.
23
30618
1331.25
... More
Providing and fixing Wall mount Liquid Soap Dispenser of approved brand
23
13268
576.88
... More
15 mm C.P. brass tap with elbow operation lever of approved brand and manufacture
15
12646
843.13
... More
15 mm C.P. brass 2 in 1 tap of approved quality conforming to IS standards
10
10650
1065
... More
15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
22
23430
1065
... More
15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
30
31950
1065
... More
C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.
35
4659
133.13
... More
Providing and fixing Stainless steel SS-304 Grade L Shaped 90° Wall Mounted Grab bars Near EWC (European Water Closet) of approved brand for Disable-friendly Bathroom/Toilets as per standard and specification.
2
7987
3993.75
... More
Providing and fixing Stainless steel SS-304 Grade Foldable Grab bar For Disable-friendly Bathroom/toilets Make: Jaquar/ Equivalent per standard and specification.
2
11537
5768.75
... More
15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
20
97625
4881.25
... More
High water pressure S.S geyser connection pipe (2 feet long) of approved quality and make,
60
18637
310.63
... More
15 mm C.P. brass ABS Health Faucet Jet Spray with Hose and Holder of approved quality conforming to IS standards (KOHLER/JAGUAR/CERA)
2
3195
1597.5
... More
Supply installation testing and commissioning of Instant Geyser 15ltr Capacity of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete
2
35500
17750
... More
Providing and Fixing Handles with lock system of main doors LAPO Premium Rose Mortise Door Lock Handle Set/ Mortise Lock with Brass Lock Body and 70mm Brass Cylinder Set with 3 Brass Computer Keys / Zinc Alloy Weather Proof (Matt Finish) or Godrej Locking Solutions and Systems Gloria Antique Brass Door Handle with Lock Set 2C for Home and Office Entrance Door (200 mm, Gold) or any other approved brand as per engineer incharge
15
99843
6656.25
... More
Providing and installation of PUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per direction engineer incharge
6
250275
41712.5
... More
Design Supply and installation/Fixing staircase railling of stainless steel (Grade 304) railing(Top Handrail Dia 50mm , two number intermediate Horizontal tubes Dia 25mm and Rectangular Two Pair Balusters Dia 38mm @1000mm C/C) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) including fixing the railing with necessary accessories , newal post , balusters and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, necessary screws/fixtures complete job as approved by engineer incharge (Note : No additional payment shall be made to master pillar/Newal Post )
182.88
730377
3993.75
... More
Design Supply and installation/Fixing stainless steel SS-304 Grade wall mounted handrail 40-45mm in dia including wall brackets at a spacing of 1.2m-1.5 with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, along staircase wall , corridors with suitable arrangement as per drawings and approval of Engineer-in-charge
243.84
259689
1065
... More
Providing wood work in frames of walls,false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood (Note : False Celling Design should be as per engineer in charge which may be of different level celling )
35.15
1874919
53340.53
... More
Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood
2048.85
4727721
2307.5
... More
Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job
2048.85
1363776
665.63
... More
Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-incharge.
1321.71
762468
576.88
... More
Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per liter, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5
m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge.
908.93
1932794
2126.45
... More
Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 25 mm thick Second class teak wood
706.6
3605687
5102.87
... More
Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge)
-
-
-
... More
25MM/32MM WATER PIPE
280
447300
1597.5
... More
75MM/100MM WASTE PVC PIPE
70
111825
1597.5
... More
Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge
-
-
-
... More
25MM/32MM WATER PIPE
280
44730
159.75
... More
75MM/100MM WASTE PVC PIPE
70
17395
248.5
... More
Suppy and installation of 6 - 8 Inch Dia alumunium suction Duct Pipe (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM ) For HVAC Ducting for kitchen baths including stainless steel Clamps and all necessary fixtures all complete
13.94
14846
1065
... More
Supply and installation of Reflective Bubble Aluminum Foil Insulation / Aluminium Silver Bubble Sheet 210 GSM (7 mm) Thick Light Weight Reflective Insulation , Max Withstanding Temperature -40 degree To +110 Degree Waterproof insulation all complete
145.85
23947
164.19
... More
Supply and installation of electrical Underfloor heating mats for floor heating systems non-corrosive, flexible heating elements including cables, pre formed cable mats including smart thermostat and digital electrical control panel all complete (STIEBEL ELTRON / DANFOSS Or any other approved brand
145.85
776651
5325
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.
1166.17
641883
550.42
... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
816.32
1304071
1597.5
... More
Providing of fabricated steel roofing truss, purlins, rafters, posts, plates ISA.65x65x6mm ,ISA.50x50x6mm, 40x40x6mm, ISMC 75mm ,65mm,50mm,Plates 8mm,10mm thick, including cutting hoisting fixing in position and applying a priming two or more coat of approved steel priming/painting all work complete job. including launching of trusses
52722.6
7720697
146.44
... More
Supply & fixing of 12mm clear toughened/Heat strength (HS) laminated Glass +2.28mm PVB layer of + 12mm clear toughned/Heat strength (HS) laminaated glass for skylight approved band (SAINT GOBIN/ASHAI/MODI GUARD).
335.74
2443347
7277.5
... More
Glass fixing charge with silicon structure sealant (GE make or Dow corning 789 weather or structure seal will be used), double side DSP Tapes (Norton/Saint Gobin/3M will be used), aluminum angle and cleats and handling lifting from all respect. Including all transportation charges.
335.74
1281267
3816.25
... More
Provision for providing and fixing ornamental Shingstak (Ladakhi wood carving over exterior Windows and main entrance door) (Design as per the direction of Engineer-In-charge.) including polishing all complete
300
1198125
3993.75
... More
Providing and fixing wooden colour aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 2.5 Kg/m 10 Gauge Thickness
-
-
-
... More
Powder coated aluminum (minimum thickness of powder coated 50 microns)
728.66
290910
399.24
... More
Providing and fixing wooden colour aluminum work For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM (2.3 Kg/m 10 Gauge Thickness)
335.18
178483
532.5
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)
-
-
-
... More
TOUGHENED glass panes for ALUMINIUM FRAMES of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS / HNGIL make as approved by engineer in charge Qty vide window openings @80%
111.78
114086
1020.63
... More
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical location in load application areas that accommodates multi directional seismic movement without stress to its components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self centering arrangement that freely rotates / moves in all directions. The Self –centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer-in-Charge. (Material shall confirm to ASTM 6063.) Floor joint of 100 mm gap
182.93
1588425
8683.24
... More
Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02.
The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall conform to ASTM 6063.)
Wall Joint of 100 mm gap
109.76
690791
6293.65
... More
Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arrangement support plates as per ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s preengineered self-centering arrangement that freely rotates/ moves in all directions. The self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint system shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint system to have water tight joint is mandatory requirement. Material shall confirm to ASTM 6063.
Roof joint of 100 mm gap
41.46
359942
8681.68
... More
Providing and fixing plained weather board & eaves boarding. 2nd class Deodar wood & 300x40 mm (nominal size)
46.2
81385
1761.58
... More
MasterSeal HML 5000 Liquid cold-applied waterproofing membrane system
800
127800
159.75
... More
MasterSeal 551 Elastomeric acrylic reinforced cementitious, waterproofing coating for concrete and masonry retaining walls, basement walls, parking
800
142000
177.5
... More
PART 2: SEPTIC TANK OF OFFICE COMPLEX (2 No.)
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: as directed by Engineer-in-charge. Note :Stockpile the top layer of soil of 200 mm and cover it for reuse in landscape (If soild is fertile or capable to make it fertile), soil test to be performed from ICAR Lab as per green Building Guidelines
-
-
-
... More
ORDINARY ROCK=80%
155.95
74807
479.69
... More
ALL KIND OF SOIL=20%
38.99
9593
246.06
... More
Disposal of Mulba/Excavated Earth Beyond 50m (Lead upto 6Km) Outside Campus Area (CARRIAGE OF MATERIALS By Mechanical Transport including loading, unloading and stacking)
155.4
48271
310.63
... More
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (crushed) Mud Mate
(Use Of Portland Pozzolana Cement Is advised as Per Green Building Guidelines OR 25% replacement of Ordinary Portland cement with fly ash by weight of cement used in structural concrete.)
4.6
28052
6098.44
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 cement : 6 course sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with cement mortar 1:6 ( 1 cement : 6 course sand) and curing complete (Quarry Stone)
13.63
77794
5707.61
... More
Dry random rubble masonary with hard stone in foundation & plinth using quarry stone with bond stone
16.36
52580
3213.97
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) (Use Of Portland Pozzolana Cement Is advised as Per Green Building Guidelines OR 25% replacement of Ordinary Portland cement with fly ash by weight of cement used in structural concrete.)
34.42
382932
11125.28
... More
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal
size) (Use Of Portland Pozzolana Cement Is advised as Per Green Building Guidelines OR 25% replacement of Ordinary Portland cement with fly ash by weight of cement used in structural concrete.)
21.81
221514
10156.55
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
5163.12
501132
97.06
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platforms.
SEPTIC TANK/SOKAGE PIT
280.19
181762
648.71
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. (Use Of Portland Pozzolana Cement Is advised as Per Green Building Guidelines OR 25% replacement of Ordinary Portland cement with fly ash by weight of cement used in structural concrete.)
26.76
16790
627.46
... More
Supplying and fixing C.I. cover without frame for manholes:
-
-
-
... More
560 mm diameter C.I. cover ( heavy duty) the weight of the cover to be not less than 108 kg
4
24035
6008.77
... More
CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) (PPC or cement with 25% flyash is recommended as per green building guildelines)
84.72
27373
323.11
... More
PART 3: GUARD ROOM
-
-
-
... More
Earth work in bulk excavation by mechanical means over areas (Exceeding 30 m and upto 1.5 mtr in depth. I mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto I Intr from cutting edge. disposed ealth to be leveled and neatly dressed in :
-
-
-
... More
ORDINARY ROCK 50%
56.8
21933
386.15
... More
ALL KINDS OF SOIL 50%
56.8
10466
184.27
... More
Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr.
45.44
8823
194.18
... More
STONE SOLLING Dumping of stone including cost of stone (in horizontal on level)
3.3
1994
604.39
... More
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (crushed)
14.91
90927
6098.44
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. (Use Of Portland Pozzolana Cement Is advised as Per Green Building Guidelines OR 25% replacement of Ordinary Portland cement with fly ash by weight of cement used in structural concrete.)
25.75
16157
627.46
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
25.25
280913
11125.28
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
3534.5
343058
97.06
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footing bases of column
20.07
6541
325.91
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.
64.1
38692
603.63
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.
79.54
35497
446.28
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.
36.79
20753
564.1
... More
Providing and laying autoclaved aerated cement blocks masonry with 100mm/150mm/200mm /300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete including providing of 75mm Cavity in Walls as per architechtural drawing and as per direction of Engineer-in-Charge.
33.16
388772
11724.13
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) Second class teak wood
0.19
32138
169152.18
... More
Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class teak wood 35 mm thick shutter)
3.34
14100
4221.7
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Second Class teak wood
5.02
17156
3417.7
... More
Providing and fixing factory made uPVC AIS or FENISTA make white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent
finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).
5.11
59508
11645.46
... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising ofuPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
Fixed window / ventilator made of (small series) frame 47 x 50
mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
1.39
15161
10907.33
... More
Providing and fixing DGU ( with 0.25 SHGC and 0.35 VLT glazing in uPVC window, ventilator shutters and partitions etc. with proper sealing as per norms etc. complete as per the architectural drawings and the directions of engineerin- charge. ( Note : DGU with 0.25 SHGC and 0.35 VLT)
-
-
-
... More
TOUGHENED DGU glass panes filled with argon gas of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS / HNGIL make as approved by engineer in charge
9.2
9389
1020.63
... More
CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand)
124.96
41339
330.82
... More
Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 Coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.
75.93
57535
757.74
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
124.96
18670
149.41
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (Black Paint to be used for Trombe Wall)
49.98
8595
171.97
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
-
-
-
... More
New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
75.93
17030
224.29
... More
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
10.45
717
68.65
... More
Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete.
10.45
1112
106.5
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
10.45
1764
168.84
... More
Providing & Fixing finished brass hanging type floor door stopper with necessary screws etc complete.
1
177
177.5
... More
Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm (Kajaria/Somany/Cera or Any approved Brand as per Engineer In charge)
20.81
38319
1841.39
... More
P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. (Kajaria/Somany/Cera or Any approved Brand as per Engineer In charge)
28.98
41806
1442.6
... More
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
-
-
-
... More
Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. JAGUAR/CERA Make
1
4881
4881.25
... More
Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:
-
-
-
... More
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps JAGUAR / CERA/HINDWARE Make
1
3993
3993.75
... More
P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm
1
1331
1331.25
... More
Providing and fixing soil waste & vent pipe (Prince or any other appoved brand as per Engineer In Charge
-
-
-
... More
PVC Pipe. 110mm dia (10 feet unit Length)
4
5147
1286.88
... More
PVC Pipe. 75mm dia (10 feet unit Length)
4
3905
976.25
... More
PVC Bend 110mm dia
4
887
221.88
... More
PVC Bend 75mm dia
4
887
221.88
... More
PVC Tee 110mm dia
4
1065
266.25
... More
PVC Tee 75mm dia
4
1065
266.25
... More
PVC Collar 110mm dia
3
532
177.5
... More
PVC Collar 75mm dia
3
399
133.13
... More
PVC trap 110mm dia
3
1198
399.38
... More
PVC trap 75mm dia
3
1065
355
... More
PVC Socket 110mm dia
3
532
177.5
... More
PVC Socket 75mm dia
3
532
177.5
... More
PVC door junction 110mm dia
3
931
310.63
... More
PVC door junction 75mm dia
3
931
310.63
... More
Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
-
-
-
... More
PN-16 pipe , 25mm OD(SDR-7.4)
20
7685
384.29
... More
PN-16 pipe , 32mm OD(SDR-7.4)
20
8855
442.77
... More
Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required.
-
-
-
... More
AL Drop for room doors of approved brand or as per site engineer
4
3017
754.38
... More
T- Bolt for doors of approved brand or as per site engineer
8
1988
248.5
... More
Handles for door of approved brand or as per site engineer
8
4260
532.5
... More
P/F CP brass toilet paper holder including cost of wodden,PVC,play etc.
1
1331
1331.25
... More
Providing and fixing Wall mount Liquid Soap Dispenser of approved brand
1
576
576.88
... More
15 mm C.P. brass tap with elbow operation lever of approved brand and manufacture
1
843
843.13
... More
15 mm C.P. brass 2 in 1 tap of approved quality conforming to IS standards
1
1065
1065
... More
15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
6
6390
1065
... More
15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
2
2130
1065
... More
C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.
6
798
133.13
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
... More
450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
1
1065
1065
... More
Supply installation testing and commissioning of Exaust Fan of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures all complete
2
3195
1597.5
... More
Supply installation of Soap dish approved brand as per engineer incharge
1
177
177.5
... More
15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
1
4881
4881.25
... More
16 mm nominal bore of standard back type C.P. brass close hole wall mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
1
3993
3993.75
... More
High water pressure S.S geyser connection pipe (2 feet long) of approved quality and make,
4
1242
310.63
... More
16 mm nominal bore of standard back type C.P. brass sink mixer of approved quality and make, weighing not less than 1.970 kg.
1
4881
4881.25
... More
Providing and fixing SS locking grating (jali) anti-cockroach
3
1730
576.88
... More
Supply installation testing and commissioning of Geyser 15ltr Capacity horizontally mounted of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete
1
15975
15975
... More
Supply installation testing and commissioning of Geyser 50ltr Capacity horizontally mounted of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete
1
24850
24850
... More
Providing and installation of PUF (Puf Insulated Tanks) water tank capacity 500 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per direction engineer incharge including all necessary accessories
1
41712
41712.5
... More
Providing wood work in frames of walls,false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood
0.23
12268
53340.53
... More
Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood
43.85
101183
2307.5
... More
Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job
43.85
29187
665.63
... More
Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge. With resin bonded rock wool with density 48 kg/cum
32.7
18863
576.88
... More
Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per liter, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge..
11.15
16935
1518.89
... More
Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 25 mm thick Second class teak wood
11.15
56897
5102.87
... More
Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge)
-
-
-
... More
25MM/32MM WATER PIPE
20
31950
1597.5
... More
75MM/100MM WASTE PVC PIPE
20
31950
1597.5
... More
Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) including alumunium duct clading of approved quality and finish as per the direction of engineer in charge
-
-
-
... More
25MM/32MM WATER PIPE
20
3195
159.75
... More
75MM/100MM WASTE PVC PIPE
20
4970
248.5
... More
Supply and installation of Reflective Bubble Aluminum Foil Insulation / Aluminium Silver Bubble Sheet 210 GSM (7 mm) Thick Light Weight Reflective Insulation , Max Withstanding Temperature -40 degree To +110 Degree Waterproof insulation all complete
4.46
712
159.75
... More
Supply and installation of electrical Underfloor heating mats for floor heating systems non-corrosive, flexible heating elements including cables, pre formed cable mats including smart thermostat and digital electrical control panel all complete (STIEBEL ELTRON / DANFOSS Or any other approved brand
4.46
23749
5325
... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
42.31
67590
1597.5
... More
Providing of fabricated steel roofing truss, purlins, rafters, posts, plates ISA.65x65x6mm ,ISA.50x50x6mm, 40x40x6mm, ISMC 75mm ,65mm,50mm,Plates 8mm,10mm thick, including cutting hoisting fixing in position and applying a priming two or more coat of approved steel priming/painting all work complete job. including launching of trusses.
2049.3
300099
146.44
... More
Part4
-
-
-
... More
COMPOUND WALLING
-
-
-
... More
Excavation work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
-
-
-
... More
ORDINARY ROCK 20%
55.64
23209
417.13
... More
ALL KINDS OF SOIL 80%
222.54
49779
223.69
... More
Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr.
111.27
21606
194.18
... More
Dumping of stone including cost of stone (on horizontal)
17.98
10866
604.39
... More
Coursed Rubble Masonry with hard stone in foundation and plinth and curing complete with:
Cement mortar 1:6 (1 Cement : 6 coarse Sand) 2nd Sort
60.79
408467
6719.32
... More
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (crushed)
17.98
98740
5491.66
... More
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) (crushed)
15.14
92342
6099.25
... More
Providing and laying in position specified grade of reinforced cement concrete including curing in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, excluding the cost of centering, shuttering and finishing :water trough type wash basin in Bath/Toilets 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
87.2
927955
10641.69
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically treated bars.)
7063.03
685537
97.06
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footing bases of column
685.95
284820
415.22
... More
Providing and fixing upto floor five level precast cement concrete solid block including hoisting and setting in position with cement mortor 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete: 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size
121.58
1234833
10156.55
... More
12 mm thick cement plaster of mix in cement mortar 1:6 (1 cement:6 fine sand)
1055.84
341152
323.11
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
257.64
41454
160.9
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
257.64
47825
185.63
... More
Providing and fixing Y Shape Angle Iron posts in in Pillars 50 x 50 x 6mm angles (4.5Kg/m)
1143.22
167413
146.44
... More
Providing and fixing barbed wire fencing three on each side of Y shaped Angle iron
1500
46590
31.06
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter openable length ( total length 90m), having 50 nos rounds per 6 meter length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile
strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ meter (cost of M.S. angle, C.C. blocks shall be paid separately)
250
68592
274.37
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required and including all other accessories. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
396.34
42210
106.5
... More
Square Pillar Light Antique Gate Lamp E27 Lantern Post E27 (Color : Bronze) outdoor pillar lantern lamp made of aluminum，anti-corrosion, anti-rust, long service life, preferred materials for outdoor lighting! modern minimalist pillar garden lights. outdoor waterproof IP55 rated, protected against splashing water , rainproof, windproof and snowproof. Decorative element to any property, suitable for courtyard gates, lawn pillars, entrances light source including E27 bulb, available bulb types include: LED / CFL / incandescent including all other necessary components.
70
279562
3993.75
... More
PART 5: GATE
-
-
-
... More
Excavation work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
-
-
-
... More
ORDINARY ROCK 20%
4.22
2024
479.69
... More
ALL KINDS OF SOIL 80%
16.87
4150
246.02
... More
Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr.
8.43
1488
176.52
... More
Stone soling including cost of stone & carriage (on horizontal)
1.13
682
604.39
... More
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) (crushed)
0.72
4390
6098.44
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
28.73
305311
10626.92
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically treated bars.)
3734.59
354599
94.95
... More
CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) (PPC or cement with 25% flyash is recommended.)
110.24
35619
323.11
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
110.24
17737
160.9
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer
110.24
20415
185.19
... More
Provision for providing and fixing ornamental Shingstak (Ladakhi wood carving over main Entrance Gate) (Design as per the direction of Engineer-In-charge.)
60.98
243538
3993.75
... More
Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job
20.9
12056
576.88
... More
Providing and laying pressed clay tiles (as per approved pattern 20mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) and finished neat complete
9.29
5482
590.12
... More
Providing and fixing angle iron frames /Tubular Section for Main Gate of mild steel including joints mitred and welded including fixing of necessary butt hinges , hoisting of gate and applying a priming coat of approved steel primer and two or more coat of synthetic enamel paint of approved brand , all complete as per the direction of Engineer-In-charge.
700
102508
146.44
... More
Supply and installation of 3D Stainless Steel 304 grade Letters highly attractive and quality fabricated construction finish with choice of backlit light source which makes the letter come out even more as well as add to the attraction value to the surroundings.
Height of Letters 18 Inch @Rs 200 Per Inch MUNICIPAL COMMITTEE OFFICE to be placed on L/R side of compound walling
24
63900
2662.5
... More
Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).Raj Nagar plain white marble/Udaipur green marble/zebra black marble.(Area of slab over 0.5 sqm) 16mm Thick
62.43
326994
5237.78
... More
Providing and fixing cramps of required size and shape in RCC/CC/brick masonry backing with cement mortar 1:2 (1 cement: 2 coarse sand) including curing & drilling necessary hole in stones and embedding the cramp in the whole (fastener to be paid separately). Gunmetal cramps
12.16
6920
569.11
... More
Finishing Gate with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and
including priming coat of exterior primer applied @ 2.20kg/10sqm) main gate and wicket gate
24.94
3668
147.1
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B
8
7810
976.25
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
75
9718
129.58
... More
Supply , installation, tesing and commissioning of Regent make LED 30 W , surface mounted 30 w luminlus flux of 5040 , lm, colour temperature of 5000k, Cri ˃80 THD ˂ 10% PF ˂ 90 IP 230V constant current LEDs Direct light emission, 230 v , electronic control gear, opal diffuser, L=1200mm , IP 20. Havells/syska
8
12780
1597.5
... More
Square Pillar Light Antique Gate Lamp E27 Lantern Post E27 (Color : Bronze) outdoor pillar lantern lamp made of aluminum，anti-corrosion, anti-rust, long service life, preferred materials for outdoor lighting! modern minimalist pillar garden lights. outdoor waterproof IP55 rated, protected against splashing water , rainproof, windproof and snowproof. Decorative element to any property, suitable for courtyard gates, lawn pillars, entrances light source including E27 bulb, available bulb types include: LED / CFL / incandescent.
1
4881
4881.25
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25MM
30
2396
79.88
... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
62.3
99524
1597.5
... More
Providing of fabricated steel roofing truss, purlins, rafters, posts, plates ISA.65x65x6mm ,ISA.50x50x6mm, 40x40x6mm, ISMC 75mm ,65mm,50mm,Plates 8mm,10mm thick, including cutting hoisting fixing in position and applying a priming two or more coat of approved steel priming/painting all work complete job. including launching of trusses
2346.98
270794
115.38
... More
PART 6: CONSTRUCTTION OF CUT & COVER TUNNEL
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: as directed by Engineer-in-charge.
-
-
-
... More
ORDINARY ROCK 30%
9.54
4576
479.69
... More
ALL KINDS OF SOIL 70%
22.27
5479
246.06
... More
Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr.
28.63
5559
194.18
... More
Dumping of stone including cost of stone & carriage (on horizontal)
1.98
1196
604.39
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1.98
12074
6098.44
... More
Reinforced cement concrete work in Footing , Pedestal, Columns, beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with M25 (1:1:2) (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)
157.91
1756792
11125.28
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
26845.38
2548968
94.95
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
623.36
317471
509.29
... More
CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) (PPC or cement with 25% flyash is recommended.)
301
97256
323.11
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements