Public Works Department Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 8,02,720Document Cost
₹ 4,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_13547_1Tender No
80 CDL of Leh of 2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
57.57
-
4494.76
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
300.33
-
168.38
Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,Plinth Beam, footing bases of column for mass concrete.
203.92
-
288.97
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
811.2
-
511.37
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.
597.35
-
691.67
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.
594.2
-
646.37
Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls Under 20 cm wide
280
-
246.4
Centering and shuttering including strutting, propping etc. and removal of form for: Stairs (excluding landings) except spiral staircases.
58.35
-
821.86
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)
180.02
-
4886.29
Dry random rubble masonry with hard stone in foundation and plinth: 7.3.1 With bond stone.
8.96
-
2751.48
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
141.71
-
9060.22
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size
297.02
-
9485.11
Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically Treated bars of grade Fe-500D or more
61422.2
-
94.02
Providing and laying stabilized block (CSEB ) wall having two leaves interlocked with ties at every 3' , leaving air cavity of 3" between two wall leaves.
209.72
-
7627.11
Providing & fixing upto floor five level precast cement concrete solid blocks including
hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of
required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal
size)
82.83
-
9699.06
WALL PLASTER - EXTERIOR
CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)
2605.14
-
286.49
CEMENT PLASTER (IN FINE SAND) 6mm Cement plaster of mix:1 : 3 ( 1 cement : 3 fine sand)
560
-
244.02
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick
3165.14
-
142.66
Providing and applying cement primer of specified thickness, of approved brand and manufacturer, over the putty wall surface to prepare the surface even and smooth complete.All Complete
681.18
-
253.38
Finishing walls with water proofing cement paint of required shade on
New work (two or more coats applied @ 3.84 kg/10sqm)
681.18
-
93.35
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
2483.96
-
151.57
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Shade and Design as approved by Architect/Engineer in charge.
247.15
-
1721.89
Providing and fixing panelling / Nordic Panelling including the cost of panellling,jamb work all complete including the cost of joist and 12mm ply frame work of Budloo wood 2.5"x 1.5" , polishing . Polish shade and texture as approved by Architect/Engineer in charge. All complete job.
379.42
-
1355.93
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube - 1" Outer Dia @4kg/m .Design of railing as approved by Architect/ engineer in charge.
430
-
177.42
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete. 50mm thick with 20 mm nominal size stone aggregate.
468
-
470.76
20mm cement plaster finished with a floating coat of neat cement of mix :
1 : 3 ( 1 cement : 3 fine sand)
13.02
-
497.52
VITRIFIED FLOOR TILES
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
138.2
-
1821.1
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm
13.82
-
2124.18
Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :
37.5
-
2109.91
LAMINATED FLOORING
Providing and fixing Interlock Laminate (AC-4) on floors along with 4 inch skirting on walls including necessary fittings and accessories.All Job Complete
234.93
-
161.01
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
263.12
-
8014.42
Extra for pre finished nosing to treads of steps of marble stone
101
-
490.94
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood
2.16
-
93625.77
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (a) 35
mm thick including ISI marked Stainless Steel butt hinges with necessary screws
75.51
-
3751.26
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame,DGU ( Double Glazed Unit ) sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles with locks, G.I
fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. All Complete job.
Make Encraft , Kommerling or equivalent
1900.25
-
983.05
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
222
-
207.26
Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :
74
-
51.73
Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.
74
-
104.68
Providing and fixing ISI marked 100mm -mortise door lock- silver satin finish with 3 keys with 6 lever double stage lock set, with necessary screws etc complete. Of make Godrej, Harrison or equivalent
37
-
1694.91
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (a) Twin rubber stopper
37
-
381.35
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.Of make Godrej, Dorma or equivalent
37
-
2711.86
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
111
-
60.5
French spirit polishing, Two or more coats on new works including a coat of wood filler
111
-
356.38
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 5x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction Perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to all/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board /calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks)
64.7
-
1572.83
Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part-I, of size
595x595 mm, having perforation of9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
148.15
-
1941.03
Providing and fixing Ornamnetal Wooden ShingstakCost includes applying of Wooden grey sealer and polish. All Job Complete.(All Floors included)
145
-
2966.1
Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS: 702 applied hot @ 1.45 kg/sqm of area for each course, second course of roofing felt type 3 grade-I (Hessian based self finished bitumen felt) and fourth & final course of stone grit 6mm & down size or pea-sized gravel spread at 6 cubic decimeters per square metre including preparation of surface but excluding grading complete with: Bitumen felt (Hessian based) type 3grade I conforming to Is : 1322
265
-
422.93
Providing and applying polyurethane insulation foam in the exterior cavity walls of thickness 3 inches.All work complete
1600
-
322.03
SITC OF Hot and Cold AC Capacity : 1.5 Ton ISEER Rank / ISEER : Inverter 5 Star / 5.2 Cooling Capacity (Btu/h) : 17,100 / 8,550 (5,120 ~ 19,619) Power consumption (Cool) (W) : 1,270 / 431 (310 ~ 1,620) Heating Capacity (Btu/h) : 18,770 (4,400 ~ 22,520) Power consumption (Heating) (W) : 1,300 (260 ~ 1,800) Annual Power consumption (kWh) : 743.95 Make Daikin, HierAll work complete
17
-
110169.49
Providing and fixing in position 12mm clear toughened Glass door "of Make Saint Gobain, Asahi , TATA or equivalent" (Door opening size:- 3'-6" x 7'-0" ) for naked glass door. The work to include making necessary template for all the glasses and then cutting the clear float glass to correct size, making all the necessary holes, cuts etc., and then toughening the same. The cost to include all hardware required viz., Ozone/ebco/godrej or approved equivalent make floor spring with its accessories, top pivot, center lock, 450mm glass door handles etc., along with etching with sand blasting as per design and drawing. The maximum size of each glass shall be as per the drawing or the direction of the Engineer-in-charge. The rate is for a finished item of work etc., complete as directed.
32
-
508.47
12mm clear toughened Glass partition :-
Providing and fixing in position 12mm clear toughened Glass partition "of Make Modifloat, Saint Gobain, Asahi or equivalent" with patch fittings for the full height glass partitions as per the direction of the engineer-in-charge. The work to include making necessary template for all the glasses and then cutting the clear float glass to correct size, making all the necessary holes, cuts etc., then toughen the same. The cost to include all hardware (PATCH FITTINGS etc) required of Ozone/EBCO/GODREJ or approved equivalent make viz., single corner patch, top and bottom corner patch etc. or as per the direction of the engineer-in-charge, along with etching with sand blasting as per design and drawing. The rate is for a finished item of work etc., complete as directed.The cost to include the cost of bevelling and smoothening of the exposed edges of the glass.
90
-
338.98
Providing and Fixing Vertical Blinds ( Colour and Fabric as selected by architect in charge).All work complete
1200
-
211.86
Providing and Fixing of Acrylic sign board with lettering)The height ,written text, colour,font and size of board to be decided as per architect in charge . To be installed with necessary signage lighting and wiring.All work complete
1
-
67796.61
Providing and Fixing of Acrylic sign board with lettering)The height ,written text, colour,font and size of board to be decided as per architect in charge . To be installed with necessary signage lighting and wiring.All work complete
1
-
67796.61
Providing and fixing float glass panes in glazed doors, windows and clerestory window shutters.Cost including necssary hardware for installation
5.0mm thick
7
-
241.52
Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Medium shade using 50% white cement and 50% ordinary cement.
54.9
-
508.47
Providing and fixing Precast Concrete Kerb Stone blocks of size 300x300x100mm as per sample approved
90
-
508.47
Carriage of material by MT from source to site of work including loading, unloading complete job Cement & Steel ----------------5Km
283.57
-
175.65
sand ---------------10 km
364.9
-
269.05
Stone Aggregate-----------10 km
867.87
-
269.05
Stone -----------10 km
188.98
-
316.53
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
8
-
7035.82
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
3
-
9554.74
Providing and fixing counter top wash basin , 15 mm dia CP Brass single hole extended body basin mixer of approved quality and make, including cutting of Concrete Slab/Granite top and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
11
-
5918.26
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable
brackets all as per manufacturers specification and direction of
Engineer-in-charge.
6
-
8704.51
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
Kitchen sink without drain board
510x1040 mm bowl depth 200 mm
2
-
7410.25
Providing and fixing C.P. Sink Mixer with Sewel Spout of approved quality conforming to IS:8931
2
-
3220.33
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
11
-
1834.51
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
450 mm long towel rail with total length of 495 mm,
78 mm wide and effective height of 88 mm, weighing not
less than 170 gms
2
-
872.22
Providing and fixing toilet paper holder :
C.P. brass
11
-
1597.3
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.
Waste coupling 38 mm dia of 83 mm length and 77mm
breadth, weighing not less than 60 gms
11
-
231.35
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
17
-
1097.66
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore
10
-
554.87
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15mm nominal bore
35
-
681.48
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
15 mm nominal bore
2
-
794.04
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
3
-
417.39
Providing and fixing CP Brass Grab bar complete including fixing on wall with CP brass screw complete.
2
-
1059.32
Providing and fixing Polypropylene trap of self cleaning design complete including cost of cutting and making good the cut-outs in walls and floors etc. complete (P trap). (Make:Astral/Poloplast/Rehau)
a) 110mm outer dia inlet and 110 mm outer dia outlet
15
-
1440.67
Providing and fixing 100% stainless steel grating with frame of approved make and quality grade 304 on top of floor trap WITH COCKROACH JALI. The rate includes the cost of all ancillary works and material as required to complete the works.
Make: CAMERY OR EQUIVALENT MAKE CHILLY
125 x 125 x 1mm Camery Cat : CCR-KFCH-125 MATTE
15
-
593.22
101 x 101 x 1 mm Camery Cat : CCR -SFCH -101
6
-
423.72
Providing and fixing 110mm outer Dia PP inlet fitting approximately 450/600 mm long with one or more 40/63mm outer dia. PP sockets solvent welded complete.(Pipe class same as soil and waste pipe) (Make:Astral/Poloplast/Rehau) Rubber ring Joints
15
-
1610.16
Providing and fixing PolyPropylene Pipes with all injection moulded fittings complete including cutting and making good the walls wherever required. (For soil & waste pipes). Nothing extra will be paid for supports.(Inside Toilets & Kitchen) 40mm outer dia
11
-
391.35
63 mm outer dia
12
-
508.47
Providing and fixing PP Pipes with all injection moulded fittings complete including cutting and making good the walls wherever required. (For soil, waste & vent pipes). Nothing extra will be paid for supports.) For Vertical Pipes (Make:Astral/Poloplast/Rehau) rubber ring joints
110 mm outer dia
156
-
1059.32
Providing and fixing PP Pipes with all injection moulded fittings complete including cutting and making good the walls wherever required. (For soil & waste pipes). Nothing extra will be paid for supports.(Inside Toilets & Kitchen) (Make:Astral/Poloplast/Rehau) Rubber ring joints
110 mm outer dia
94
-
1059.32
Cutting holes in RCC beam/Slab by diamond cutting technique.(Nothing extra payable for electrical and water supply required for the cutting operations)
102mm dia Hole in 125mm thick slab
15
-
847.45
152mm dia Hole in 125mm thick slab
6
-
1271.18
Providing and fixing 110mm dia PP approximately 450 mm long with one reducer elbow 110x63 mm(All class-V, IS:4985) complete in all respects.(Make:Supreme/Finolax)
6
-
847.45
Providing and fixing SS Floor clean out/clean out plug with SS cover and EPDM seal complete in all respects including fixing of SS cleanout plug with CP brass screws. (Make:Chilly)
100mm dia
9
-
1271.18
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.
PN - 16 Pipe, 25mm OD (SDR-7.4)
28
-
310.07
PN - 16 Pipe, 32mm OD (SDR-7.4)
18
-
402.22
PN - 16 Pipe, 40mm OD (SDR-7.4)
27
-
581.86
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.
Concealed work,including cutting chases and making good the wall etc.
PN - 16 Pipe, 20mm OD (SDR-7.4)
90
-
420.29
PN - 16 Pipe, 25mm OD (SDR-7.4)
54
-
477.03
Providing and fixing inslulation of pipes with self regulating heat tape wire of make Denfoss or Equivalent along with layer of foam insulation (50mm thick) of make K- Flex or equivaluent with protective outer layer, timer switch of make L&T, Havells or equivalent. All job complete
200
-
1525.42
Providing and fixing insulation of water tank with layer of glasswool (50mm thick) along with an outer covering of aluminium sheet, with all necessary fittings.
5000
-
29.66
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
15000
-
15.25
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All Kind of Soil
Pipes, cables etc, not exceeding 80 mm dia.
150
-
216.56
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
315
-
353.68
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
210
-
168.38
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
150 mm diameter
100
-
636.73
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
150 mm diameter S.W. pipe
100
-
710.75
Providing and fixing square-mouth S.W. gully trap class SP-1
complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
150 x 100 mm size P type
With Solid Block
3
-
3389.83
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
150 mm dia. R.C.C. pipe
215
-
382.28
Constructing brick masonry manhole in cement mortar 1:4 ( 1
cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg
(weight of cover 23 kg and weight of frame 15 kg) :
10
-
14830.5
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :
With Solid Block
6
-
6440.67
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. for sump riser pipe
80 mm dia nominal bore
40
-
778.81
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
25 mm
25
-
470.33
50 mm
60
-
727.96
65 mm
65
-
911.86
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
25 mm nominal bore
1
-
530.02
50 mm nominal bore
2
-
918.78
65 mm nominal bore
1
-
1528.96
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group A
87
-
1043.64
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required
Group A
33
-
695.33
wiring of following light point with 1.5 sq.mm FRLS PVC insulated copper conductor cable in PVC conduit recessed including chasing of wall, filling of chases with cement mortar 1:3 mix and /or fixing conduit on surface of wall/ceiling including fixing of saddles etc. including modular range of plate switches, modular cover plate, ceiling rose, surface or deep tee, circuit wiring (2x2.5+1x2.5), 1.5 sq.mm FRLS PVC insulated copper earth wire, etc. complete as required.
One point controlled by one number 10 Amp MCB (First point)
10
-
508.47
Looping Point above
31
-
677.96
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
500
-
291.1
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
400
-
334.32
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
200
-
672.45
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
200
-
1202.54
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
25 mm
400
-
114.4
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings)
33
-
739.83
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
15
-
509.74
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
27
-
629.23
Supply & fixing of Universal Socket with 4.0 sq.mm PVC insulated multistranded copper conductor cable (FRLS Type) in surface / recess 1.8 mm thick PVC conduit including cutting the chases in wall & making good the same including providing & fixing of M.S. Switch & outlet box, modular range 13Amp switch with 3 pin 13Amp socket, modular cover plate, earthing with 4.0sq.mm PVC insulated copper conductor cable / wire (FRLS Type) etc. complete as required & as per specifications.
25
-
9322.03
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
6 way (4+ 18 ), Double door.
6
-
4694.49
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63 Amps
6
-
1066.52
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 amps
24
-
2663.13
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"
curve, miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
Single pole
98
-
252.96
Supplying and fixing single pole blanking plate in the existing
MCB DB complete etc. as required.
10
-
10.16
Supplying and fixing call bell/ buzzer suitable for single phase,
230 V, complete as required.
15
-
116.94
Main Panel: incoming 1no of 250 Amp fp MCCB Of 25kA breaking capacity Metering for incoming: Digital Multifunction meter with RS-485 communication port for measurement of FP,V,A &Hz, equinlent to EM6459, with CT as required. Phase indicating lamps RYB with 2 Amps SP MCB back up. ON/OFF indicating lamps Bus Bars: Electrolytic high conductivity aluminium three phase and neutral busbars rated at 315 Amps, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. Current density of Bus Bar to be 1.3 sq.mm / amp.
4 no. of 100 Amp 4P MCCB of 25KA breaking capacity.
4 no. of 63 Amp FP MCB of 25KA breaking capacity. FLOOR PANEL-1 as described above .
1
-
211864.4
SITC OF 9 W LED 6500 K Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and
separate electronic driver. MAKE :- Havells
65
-
635.59
Supply installation testing commissioning of TRIM CLIPON LED PANEL SQUARE 36 W LED 6500 K Make:- Havells Model:-LHEAABP7IN1W024
63
-
2118.64
SITC of 5 W WH LED Mirror Light
10
-
338.98
SITC of 10W UP/DOWN Light .Make:- Havells
10
-
2118.64
SITC of 5W RGB LED Strip Light .Make:- Havells
30
-
635.59
Supply, installation, testing and commissioning of 48-Port Gigabit Smart Managed Switch having 48 x 10/100/1000BASE-T ports, 4 x Combo 10/100/1000BASE-T/SFP ports , 104 Gbps Gbps Switch Capacity, 77.4 Mpps Max. Packet Forwarding Rate , 992,594 hours MTBF, etc complete as required.(Make:- D-LINK/CISCO/HP)
1
-
63559.32
Supply, installation, testing and commissioning of 24 Port cat-6 Patch panel available with Identification: ID plate, PVC, Transparent color with paper,Six Port RJ45 modules applied ,Compatible with both 110& Krone punch down tools, Improved Cable Management with optional cable management bar, Insertion force: 20N max.etc as required.(AMP/D-LINK/MOLEX)
2
-
6355.93
Supply, installation, testing and commissioning of 1meter cat-6 patch cord for connecting socket module/modular wall face plate outlet and work stations in the premises etc complete as required..(AMP/D-LINK/MOLEX)
68
-
254.23
Supply, installation, testing and commissioning of 2meter cat-6 patch cord for connecting socket module/modular wall face plate outlet and work stations in the premises etc complete as required..(AMP/D-LINK/MOLEX)
20
-
406.77
Supply, installation, testing and commissioning of 12 U Floor mounting rack with Front Door with Toughened Glass quality. Adjustable Mounting rails - Front and Back, Fan Mounting provision, bottom cable entry provides Optimal flexibility for cable management, power poins, Frame structure with max loading capacity, etc complete as required.(NETRACK / VALRACK / D-LINK)
1
-
22033.89
Supply, Installation, Testing & Commissioning of Network WDR 2MP IR Rugged Mini Dome Camera having 12.8” 2 Megapixel progressive CMOS image sensor, Min. Illumination required 0.002ux/F1.5(color,30IRE) 0Lux/F1.5(IR on), 120dB True WDR, H.265/H.264B/Smart Codec / MJPEG (Sub Stream), 2.7mm~13.5mm, Motorized, F1.5 lens, Smart IR with upto 40m IR distance, Up to 128 GB microSDHC card, Class 10 (not included), DC12V, PoE (802.3af) (Class 0), ingress protection IP67, vandal resistance IK10, ONVIF Profile S/G/Q, FCC Part 15B, EN 55032,EN 50130-4,UL 60950-1, EN 62368-1,EN 50581,etc as required. (HONEYWELL/BOSCH/AXIS)
8
-
3389.83
Supply, Installation, Testing & Commissioning of Network WDR 2MP IR Bullet Camera having 1/2.8” 2 Megapixel progressive CMOS,
2.7 mm – 13.5 mm MFZ Lens,True day/night (IR-cut filter),Wide dynamic range up to 120 dB,Low-light performance down to 0.002 Lux / F1.5 (color, 30IRE), 0 Lux (IR ON),Up to 197 ft (60 m) IR lumination, H.264/H.264B/H.265/Smart Codec/MJPEG (Sub Stream) , Support up to Up to 128 GB micro SDHC card, Class 10 (not included), DC12V or PoE (802.3af)(Class 0), IP67 INGRESS PROTECTION ,ONVIF Profile S/G/Q, FCC Part 15B, EN 55032, EN 50130-4, UL 60950-1, ROHS- EN 62368-1, certifications, etc as required.(HONEYWELL/BOSCH/AXIS)
4
-
6779.66
Supply Installation Testing and Commissioning of 16 Channel NVR (Network Vedio Recorder) having Quad-core embedded processor , Embedded LINUX ,1 HDMI (up to 3840 × 2160);
1 VGA , H.265/H.264/MJPEG/MPEG4 compression, 2 SATA ports, up to 16 TB, Input 320 Mbps; Output 320 Mbps network throughput , 8 ports (802.3af/at) POE, FCC , ROHS , UL Certifications,etc as required. (HONEYWELL/BOSCH/AXIS)
1
-
21186.44
Supply, installation, testing and commissioning of 4TB Surveillance Hard Disk S V SERIES-offer high capacities, durable reliability and performance tuned to the high-write workloads of today’s 24×7 video surveillance systems as required. ( SEAGATE/WD/HITACHI)
4
-
27118.64
Suppling,Laying & fixing of 15 MTR HDMI cable on surface as reqd .(Stackfine/Extron/Kramer)
1
-
3559.32
Supply, installation, testing and commissioning of 2 KVA UPS with 30 minutes back-up with inbuilt battery complete etc as required. (APC/MICTOTEK/VGUARD)
1
-
21186.44
Supplying and commissioning of 9 U rack with 1 no extra tray , Power Distribution Unit of 05Amps of 05 nos.Socket in a Single Pole / Screw,Mountable,etc as required.(WQ/VALRACK/D LINK)
1
-
6355.93
Supply, installation, testing and commissioning of 24 Port Managed POE Switch having 8 nos 10/100/1000 PoE ports with 62W power budget and 2 Combo mini-GBIC ports , Static routing, QoS, Voice/Guest VLAN, GVRP, MSTP, IGMP Snooping, Time-based Access Control Lists , 802.1x including DVA, Web-based Authentication, IP/MAC Binding, Private VLAN Edge, IPv6 First Hop Security, IP Source Guard as requird.(Make – CISCO – Model - SG – 350/ 10 /HP/JUNIPER)
2
-
29661.01
Supply, installation, testing and commissioning of 43" LED monitor includes Screen size :43" Diagonal Size, LED BLU type technology, resolution- 3840 X 2160 ,250 nits brightness, 4700:1 contrast ratio, stereo mini jack, HDMI I/p-2 , USB-1, compatability for wifi, bluetooth suitable for operation on AC Power supply AC 240 V~ (+/- 10 %), 50/60 Hz,etc required.(SAMSUNG, Model – BE 43TH/SONY/LG)
1
-
46610.16
S.I.T & C of flange mounted Pole of 6.0 Mtr height made from 3.5 mm thick HT Steel plate, having complete with window with flash cover at a height of 300mm from the base for cable termination block etc and base plate of size 300 mm x 300mm x 16 mm thick on existing cement concrete pedestal as required including supplying and fixing the following in the window box provided for cable termination as per direction of engineer incharge:-
a) Supplying and fixing 6mm thick laminated mounted sheet inside the window mounted on and including providing and welding 02 nos G.I. strips 4mm thick of suitable length and having suitable size tapped holes as reqd.
b) Supplying and fixing 32 Amps terminal block, suitable for 6 sq.mm conductor- 04 nos & shorting links- 05 nos. on DIN Channel including providing. And fixing DIN Channel of suitable length- 01 nos on the existing laminated sheet.
c) Supplying and fixing 6 Amps, SPMCB, “C” characteristics curve- 02 nos, Earth stud 02 nos, welded at suitable height, washers, springs washers & nuts. rating IK 08 (Make:
6
-
14903.38
Suppplying and laying of following sizes XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 1.1 KV grade of following size in the existing Metal/Hume/HDPE DWC pipe in ground complete as required. 2 x 6 sq mm
200
-
150.84
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
50
-
31.35
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
2 x 6 sq.mm (19 mm)
8
-
167.79
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (Make:- REX/DURALINE, duly ISI marked).
63 mm dia (OD-63 mm & ID-51 mm nominal)
200
-
177.11
Providing and laying in position M - 20 reinforced cement concrete foundation of size 550mm x 550mm wide and 1200 mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia- 1200 mm long (approx)- 08 nos and reinforcement ring of cold twisted bar of 8 mm dia-190 spacing centre to centre (approx)- as required with positioning of foundation bolts as shown in the item given below and providing 63 mm (O.D.) PVC Pipe of suitable length for cable entry & exit as required.
6
-
6355.93
Supplying and fixing set of 04 nos, M20X470mm j-type (EN8 grade) foundation bolt (total length 600mm) with nuts, washer including 01 nos template of 3 mm thick size 220x220mm with 4 nos 24mm dia holes, to match with PCD of pole base plate as reqd.
6
-
297.45
Supplying & Fixing of 1.5 meter long Galvanized single arm bracket for mounting on pole and fixing of fixture including with tightening bolts etc as approved by
6
-
1860.16
Installation Testing & Commisioning of LED LIGHT Fitting of 90 watt LED Lamp, control gears such as choke condenser and igniter etc. on the street pole
6
-
5932.2
Supply Installation, Testing and Commissioning of TEC approved as IP Enabled PBX- Voice Server expandable upto 100 extensions & configured, Personal Assistant, UCaaS Hybrid Cloud Solution for Business Collaboration and Communications, Pimphony Basic 100 license CTI Integration, Voice mail 1 Hr/2ports default, Distribution list and online recording feature license, 6 party meet me conference license, Automatic Route Selection (ARS), Hot desking 2 user license, 16 inbuilt Voice compression DSP resource, IP ready from day1, SIP Openess, Inbuilt PMS/HMS Link. Presently Configuration as Below . CO Line 1Nos. PRI 1Nos. Digital Extensionss 1Nos Analogue Extensions 38Nos.
1
-
152542.37
Supply Installation, Testing and Commissioning of Operator Phone : INT Premium Deskphone Moon Grey, 4 grey level display, white backlight, Handsfree, Comfort handset, Magnetic alphabetic keyboard, Jack 3,5 mm 4 pole. Make: Avaya, Alcatel, Unify, Cisco
1
-
21186.44
Supply Installation Testing and Commissioning of Analogue phone with CLI & speaker. Make: Avaya, Alcatel, Beetel .
25
-
1694.91
Supplying & Fixing of Non- PCB based Information Outlet (I/O) RJ45, Termination TIA-568C Category-6, Termination of Catergory-6 UTP Cable, UL listed ,Shall conform to Category-6 as per the EIA/TIA-568C.2,Shall support network line speeds up to 1 Gbps, Shall have RJ-45 type connector with bend limiting and strain relief boot for securing IDC contacts from external forces and for maintaining the bend radius of the cable, Shall have minimum duraility of 950 or Above mating cycles and 200 termination cycles. Certified by independent labs like ETL/GHMT/3P for compliance to EIA/TIA-568C.2 complete in all respect.( For Data, EPBAX and CCTV) . Make- Legrand, Molex, Panduit.
78
-
254.23
Supplying & Fixing of Single Faceplate dimension as per commercially available modular office furniture.Shall have spring shuttered front access for preventing ingress of dust,Shall be supplied with Gang Box of the same size by System Integrator complete in all respect. .Make- Legrand, Molex, Panduit.
50
-
118.64
Supplying & Fixing of Floor Standing Network Rack - 15U /600d, with Heavy Duty Extruded. PDU 5/15Amps with MCB, Mounting Hardware (Pkt. Of 3) Cable manager 3Nos -1U with Loops complete in all respect. Make- Rittal, Valrack, APC.
1
-
15254.23
Supply Laying Testing and Commissioning of 2 Pair Solid Annealed Bare Copper, Armoured Jelly Filled Cables, Nominal Diameter of each strand No./mm 1/0.5, Solid polythene confirming to ASTMD-1248 Type-II or III, Class-A Cat. 4 or 5 (cl.4.0 of TEC GR/CUG-01/03 Aug.03), Screening- Material Polyal Tape ( as per Cl.No. 9.0), Thickness mm 0.3 +/- 15%,. Make- Delton, Finolex, Polycab.
100
-
296.61
Supplying of 4-pair Unshielded twisted pair with a cross filler (+), meeting Category 6 standards as per TIA-568C.2, The cable should be tested till 250 MHz , Shall be Fire-Retardant, Low-Smoke & Zero-Halogen as per IEC 60332-1, IEC 61034-2 & IEC 60754-1 respectively.. conisidered for DATA, CCTV+ Voice) Make- Legrand, Molex, Panduit.
350
-
57.62
Supply, Laying, testing and commissioning of 50 lines Floors MDF Box complete as required.
2
-
2118.64
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system
with open protocol BACnet/ Modbus over IP complete as per specifications.
2 loop panel.
1
-
303695.33
Supplying, installation, testing & commissioning of fault isolator complete with base as required
4
-
4140.25
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. (If the device does not have inbuilt isolator module then the bidder has to provide isolator module after every 15 devices within the cost of the detector and for this nothing extra shall be paid.)
25
-
3617.79
Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required
4
-
3448.72
Supplying, installation, testing & commissioning of addressable manual call point complete as requiredApproved by EN54/VDS/LPCB/UL.
4
-
4905.5
SITC of contact dual input module used for monitoring contacts and signals to the Fire Controller, status of monitored contacts and wiring to the contacts can monitor a single normally closed contact. Approved by EN54/VDS/LPCB/UL.
1
-
12076.27
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required
4
-
4441.52
Supplying & laying of 2 x 1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
300
-
416.94
SITC of Digital 250 W (mini.) Class D, high efficiency amplifier shall be an EN54-16 compliant and certified system device in a 2 RU, 19”cabinet
. The amplifier shall be permanently monitored by the system controller.
A special standby mode shall be provided for saving energy during the time the amplifier is not is use with respect to all economical and supervision aspects.
• 480 Watt Class D amplifier
• 4 channel input on RJ45 connector, amp link in and out
(4 channel dynamic input channel switching for each amplifier
• Amplifier efficiency = 78%
• Limiter prevents audible distortion
Signal to noise ratio, A-weighted: 104 dB
1
-
93220.33
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
40
-
2262.71
Supplying, installation, testing & commissioning talk back slave station in surface/
recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/
microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc.
complete as required
3
-
1133.89
Supplying, installation, testing & commissioning of fire fighter telephone handset
complete as required.
3
-
7280.08
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges ,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
25 mm dia.
4
-
399.15
100 m dia .
23
-
1270.33
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :
100 mm dia
1
-
9183.05
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
50 mm nominal bore
1
-
798.94
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
100 mm dia.
1
-
5469.49
Providing and fixing dial type pressure gauge with isolation cock and copper pipe at hydrant station.
Dial diameter 100 mm calibration 0-15 kg/ sq.cm.
3
-
824.57
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
100 mm dia
1
-
5466.1
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
2
-
1277.96
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
Single headed Gunmetal
3
-
6350.84
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve &
nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
30m
3
-
7129.66
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
Gun Metal
6
-
4396.61
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as
required :
Gun Metal
3
-
2035.59
Providing and fixing door with frame for all internal fire hydrants fabricated from 20x20x3 mm and 40x20x3 mm aluminium hollow box sections mounted with 3 no. of 100 mm Aluminium butt hinge on Aluminium angle frame of 45x45x5 mm size with hold fasts fixed to wall with P.C.C. (1:2:4) blocks 100x100x100 mm including 2 nos allen key lock for locking along with padlock arrangement & fully glazed with 4 mm thick float glass approved by local Fire Authority, powder coated fire red finish with " fire hose' written on front suitable to house 15 mm long two length of canvas hose with couplings, one no of branch pipe, one fire mans axe and two numbers of portable extinguishers, first aid fire hose and supports for hoses, branch pipes, Axe and hose reel. Size 1200x 600 mm complete as per approved design including necessary fixing arrangement for hoses & axe and branch pipe.)
3
-
2415.25
Supplying and fixing of Fire Man's Axe with heavy insulated rubber tested upto 20 KV and confirming to IS :926.
3
-
534.74
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
3
-
1094.06
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904
as required :
2 way-100 mm dia M.S. Pipe
1
-
5584.74
3 way - 150 mm dia M.S. Pipe
1
-
7883.05
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
-
15261.86
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5 kg. ISI Marked.( Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.)
2
-
7563.55
Providing and fixing water Co2(ISI marked) extinguishers including all accessories as per IS specification with wall bracket with rawl plug
Capacity 9 liters.(IS:15683)
2
-
3263.55
Providing and fixing of self illuminated / auto glow "EXIT" signs printed on photoluminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site.
4
-
1077.11
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in allrespects, as required: (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
450 lpm at 35 m Head
1
-
72280.5
Providing and fixing liquid level controller for fire pump to stop fire pump in case of low level of water in tank , cost of conduit, cable and panel including making connection to pump panel and commissioning complete.
Float type Sensor with panel and installation
2
-
12969.49
Providing and fixing rubber expansion joint (to provide relief from stresses at pipe flanges) as per specification of the manufacturers and direction of Engineer in chief PN-16 rating
100 mm dia
2
-
483.05
150 mm dia
4
-
554.23
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements