Public Works Department Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 3,18,000Document Cost
₹ 1,590Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_13322_12Tender No
E-Tender 19 of PW(RnB) Div Kargil 2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :Ordinary & Hard Rock
14.3
2073
145
... More
Lime, moorum, building
rubbish Up to 5 km
5
735
147
... More
Earth
5
955
191
... More
Manure or sludge
5
805
161
... More
Excavated rock
5
1615
323
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m
368.19
70692
192
... More
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
Code No. 2.23
173.25
117810
680
... More
Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
252.26
82993
329
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
12.61
68094
5400
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
38.6
250900
6500
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
121.96
1162522
9532
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
33.05
361236
10930
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,
finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
39.91
446992
11200
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level
26988.6
2563917
95
... More
Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. Footing
136
29512
217
... More
Centering and shuttering including strutting, propping etc. and removal of form work for
5.9.5 Lintel, beams, plinth beams, girders, bressumers and cantilevers.
742.03
339107
457
... More
Centering and shuttering including strutting, propping etc. and removal of form work for 5.9.6 Columns, pillars, piers, abutments, posts and struts.
462.06
277236
600
... More
Centering and shuttering including strutting, propping etc. and removal of form work for 5.9.3 Suspended floors, roofs, landings, balconies and access platforms.
234.41
137598
587
... More
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)
239.51
2645627
11046
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation
7.5 in foundations and plinth including curing in :
68.45
9993
146
... More
6MM CEMENT PLASTER
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
Code No. 13.17
290.98
72163
248
... More
CEMENT PLASTER (IN COARSE SAND)
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand)
1148.27
343332
299
... More
18mm Cement plaster in two coats under layer 12mm thick cement plaster
1 : 5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick
cement plaster 1 : 3 (1 cement : 3 coarse sand) finished rough with sponge
706.82
255868
362
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,
laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.
Size of tile 600x600 mm
152.21
266367
1750
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,
in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm
7.41
13338
1800
... More
WOODEN FLOORING
Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 12 mm thick Second class teak wood
59.5
167076
2808
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
11.68.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
248.93
1187645
4771
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick
stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade
including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
11.66.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
77.3
242644
3139
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
23.93
13161
550
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 18 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels
8.2.2 Granite of any colour or shade
(Area of slab over 0.5 sqm)
51.16
271608
5309
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):(teak wood)
1.13
215302
190533
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). (teak wood)
140.4
810950
5776
... More
Providing and fixing IS : 1341 marked M.S. heavy weight - Butt Hinges with necessary screws etc., complete :
9.55.1 125x90x4.00 mm
30
360
12
... More
Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.
9.61.1 250x10 mm
33
1551
47
... More
Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :
9.64.1 125 mm
46
2254
49
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete
Code no: 9.83
23
2921
127
... More
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :
13
25142
1934
... More
Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of :
(Note:- Butt hinges and necessary screws shall be paid separately)
9.7.3 12 mm thick pre-laminated particle board (decorative lamination on one side and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-
laminated conforming to IS: 12823, Grade-I, Type-II marked :
35.46
120244
3391
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
13.70.1 Two or more coats on new work
44.28
9210
208
... More
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 13.93.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter
44.28
2346
53
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. 9.48.1 Fixed to steel windows by welding Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings / wooden frames with rawl plugs screws etc.
885.6
96530
109
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.13.88.2 2 mm thick
1148.27
114827
100
... More
Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade
Code No. 13.49
1439.26
60448
42
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. 13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @
0.90 litre/10 sqm
706.82
53011
75
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Code No: 1028
763.2
438840
575
... More
Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc consisting of following operations.
a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645
and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineerin-
charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs)
c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge.
d) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound
conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and
making pattern of 300x300mm/sq 3mm deep.
e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineerin- charge.
23.7.1 With average thickness of 120mm and minimum thickness at khurra as 65 mm
167.72
8889
53
... More
Providing and laying water proofing treatment on roofs of slabs byapplying cement slurry mixed with water proofing cement compound
consisting of applying :
(a) after surface preparation, first layer of slurry of cement @ 0.488
kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still
green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @
1.289 kg/sqm mixed with water proofing cement compound @ 0.670
kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air
cure for 4 hours followed by water curing for 48 hours.
The entire treatment will be taken upto 30cm on parapet wall and tucked
into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will
be paid for separately)
For the purpose of measurement the entire treated surface will be
measured.
167.72
73964
441
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of
approved steel primer all complete.
167.72
16268
97
... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
152.21
269563
1771
... More
Electrict Items
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed medium class PVC
conduit, with modular switch, modular plate, suitable GI box
and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
-
-
-
... More
Group C
110
152680
1388
... More
Wiring for Light /Power Plug with 2 x 4 sq.mm FRLS PVC Insulated Copper Conductor single core cable in surface/Recessed medium class PVC Conduit along with 1 No. 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required.
350
88900
254
... More
Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSPVC insulated copper conductor,single core Cable in surface/Recessed medium class PVC conduit as required.
-
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
500
96500
193
... More
4 X 10 sq. mm + 1 X 6 sq. mm earth wire
70
64540
922
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
40
14200
355
... More
Supply and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required
75
3375
45
... More
Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection,painting etc. as required.
20
10000
500
... More
Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providing and
fixing 3 pin 5/6 A modular socket
4
1996
499
... More
Supplying and fixing suitable size GI box with modular plate and
cover in front on surface or in recess, including providng and
fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A
modular switch, connections etc. as required.
6
3528
588
... More
Supplying and fixing two module stepped type electronic fan
regulator on the existing modular plate switch box including
connections but excluding modular plate etc. as required.
2
560
280
... More
Supply and fixing 5Amp, to 32Amp rating 240Watt C series manufacture circuit breaker of following coarse in the existing MCB, DB complete with connection testing and Commissioning etc.
-
-
-
... More
Single Pole
30
4950
165
... More
Supplying and fixing following way, horizontal type three pole
and neutral, sheet steel, MCB distribution board, 415 V, on
surface/ recess, complete with tinned copper bus bar, neutral
bus bar, earth bar, din bar, interconnections, powder painted
including earthing etc. as required. (But without
MCB/RCCB/Isolator)
-
-
-
... More
6 way (4 + 18), Double door
2
9762
4881
... More
Supplying and fixing following rating, Four pole, 415 V, 10 Ka M.C.B
in the existing MCB DB complete with connections, testing and
commissioning etc. as required.
-
-
-
... More
40 A F.P MCB 10 Ka "C" Curve
2
3488
1744
... More
Supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/ recess,
complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including
earthing etc. as required.
-
-
-
... More
12 way , Double door
2
4436
2218
... More
Supplying and Fixing of Following Ratings of D.P MCB 240 Volts "C" Series in the Existing MCB D.B complete with connections,Testing and Commissioning Etc. as Required.
-
-
-
... More
40 A D.P MCB 10 Ka "C" Curve
6
4824
804
... More
16 A D.P MCB 10 Ka "C" Curve
1
714
714
... More
32 A D.P MCB 10 Ka "C" Curve
1
713
713
... More
Supply and Fixing Single Pole Blanking Plate in the Existing MCB DB complete as Required.
15
1335
89
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick
including accessories, and providing masonry enclosure with
cover plate having locking arrangement and watering pipe of
2.7 metre long etc. with charcoal/ coke and salt as required.
2
14738
7369
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre
below ground as strip earth electrode, including connection/
terminating with G.I. nut, bolt, spring, washer etc. as required.
(Jointing shall be done by overlapping and with 2 sets of G.I. nut
bolt & spring washer spaced at 50mm)
10
400
40
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I.
pipe from earth electrode including connection with G.I. nut,
bolt, spring, washer excavation and re-filling etc. as required.
20
12020
601
... More
Supply & Fixing of 36W , 2x2 LED reccesse type Luminaire suitable for operating Voltage range of 150V-270V with inbuilt surge protection of 2KV and Color temprature 5700K ANSI BIN . Minimum system lumens 4320 and system efficacy 120 Lm/watt (Supported by in house NABL approved report of LM79 provided by OEM and duly signed by company manager not below rank of RM) . Luminaire should be suitable for armstrong /grid ceiling mounting with help of 4 Nos clips for suspension. Body made up of CRCA powder coated with Diffused Optics. Luminaire size should not be less than 595x595x60mm and power factor =0.95, CRI=80, THD10%, Max system wattage should be 36 Watt, IP-20 ingress protection. NABL certification and BIS (both luminaire and driver) requried to be provided at the time of sample approval.
50
97800
1956
... More
Supply installation testing and commissioning of IP20 led downlighter 18 W +/- 1 W LED Recess downlighter round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab .
32
30720
960
... More
Supply installation testing and commissioning of IP65 led Street Light 90 W +/- 5 W complete with M.S/G.I Pipe(Duly Bracket embedded along with Parapet/Wall including complete connections as required .The P.F.0.95 ,THD10% ,CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 265V. The Fixture should have In-built Surge Protection of 2.5kV Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab .
8
76400
9550
... More
Supply,Installation,Testing and Commissioning ofSingle Phase 600 mm ,1440 RPM Metal Body Wall Fan
18
271026
15057
... More
Supply installation testing and commissioning of Ceiling Fan 3 Star Rated with Voltage Range 90 V to 300 V,Min. Air Delivery 212 CMM,Service Value 5.3 Cu.m/min/watt,Aluminium Blades ,including wiring the down rods of standard length(Upto 45 cm)with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required.
2
4192
2096
... More
Supply installation testing and commissioning of 2.2 KVA Sine Wave Inverter , Input 1 Phase 3 wire and output 1 phase 3 wire with 2 Nos of 12 V 200 aH Battery.
1
64759
64759
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( Distribution Panel .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD
1
85084
85084
... More
INCOMER
-
-
-
... More
MCCB 100 A F.P 36 Ka with Adj.T.M.R With Icu=Ics=100%(02 Nos)
-
-
-
... More
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(200 Amps ) and MCB Strip of suitable size as Required.
-
-
-
... More
OUTGOINGS
-
-
-
... More
D.P M.C.B 32 A 10 Ka(02 Nos)
-
-
-
... More
D.P M.C.B 16 A 10 Ka(01 Nos)
-
-
-
... More
F.P M.C.B 40 A 10 Ka(02 Nos)
-
-
-
... More
F.P M.C.B 63 A 10 Ka(02 Nos)
-
-
-
... More
Size of wiring for CTS:- 2.5 sqmm
-
-
-
... More
Size of wiring for voltage sensing Metering :-4.0 Sq.mm
-
-
-
... More
Size of wiring of all push buttons, indicating lamps:-1.5 Sq.mm
-
-
-
... More
Types of wires:-PVC insulated 1100V grade ,Multistrand copper conductor Flexible FR-LSH
-
-
-
... More
Hinged Door Earthing:-Device mounted hinged doors connected to cubicles body by means of 2.5 sqmm.green copper flexible wire .
-
-
-
... More
The Complete Panel Shall be Made out of 2.0 mm CRCA sheet including Frame/Partitions/Doors etc.
-
-
-
... More
Gland Plates to be 3.0 mm Thick.
-
-
-
... More
Providing and fixing of lightning conductor finial, made of 25
mm dia 300 mm long, G.I. tube, having single prong at top, with
85 mm dia 6 mm thick G.I. base plate including holes etc.
complete as required.
2
780
390
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or
surface of wall for lightning conductor complete as
required.(For horizontal run)
90
270
3
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or
surface of wall for lightning conductor complete as
required.(For vertical run)
40
2680
67
... More
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
3.5 C X 70 Sq.mm A2XFY
100
68500
685
... More
Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required .
-
-
-
... More
3½ X 70 sq. mm (38mm)
2
668
334
... More
Supplying and laying of following size DWC HDPE pipe ISI marked
along with all accessories like socket, bend, couplers etc.
conforming to IS 14930, Part II complete with fitting and cutting,
jointing etc.direct in ground (75 cm below ground level) including
excavation and refilling the trench but excluding sand cushioning
and protective covering etc., complete as required.
-
-
-
... More
120 mm dia (OD-63 mm & ID-51 mm nominal)
100
23200
232
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
1 or 2 Module (75mmX75mm)
15
2400
160
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
Computer Socket RJ45 Modular type
15
4830
322
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the
existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
450
38250
85
... More
Supply & Erection of lockable 12 U rack with 5A strip and two fan for distribution, mounting of patch panels, hubs, switches etc,, complete as per specification and as desired by EIC.
2
18208
9104
... More
Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Dome Camera, 1/2.8" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.007 lux (color), 0 Lux IR On, 2 IR LEDs, Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265, H.264 & MJPEG , Fixed Lens 2.8mm, Field of View FoV H:90°, V:62°, BLC, HLC, WDR, 3DNR, White Balance - Auto/Manual, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2-Way Audio Full Duplex Line IN/Out, 256GB SD card support, Alarm: 1In/1out, PoE (802.3 af) and 12V DC, Max 5W, IP 66/67 & IK10 with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T Compliant, UL/CSA, CE, FCC, EN, RoHS & NDAA Section 889 compliant.
15
463020
30868
... More
Supply & Erection of CAT 6, 16 port Jack panel for termination of CAT6 cable,Testing & certification of the network with Omni/Penta Scanner of each Cable.
2
8224
4112
... More
Supply & Erection of Cat-6, 1Mtr Patch Cords complete as per specification and as desired by EIC.
15
1440
96
... More
Supply & Erection of Cat-6, 3Mtr Patch Cords complete as per specification and as desired by EIC.
1
230
230
... More
Supplying and drawing of 12 Pair Single Mode Optical Fibre Cables in the existing surface/ recessed Steel/ PVC conduit as required.
50
650
13
... More
Supply & Erection of Media Convertor complete as per specification and as desired by EIC.
2
10370
5185
... More
Supply & Erection of Termination Box complete as per specification and as desired by EIC.
2
6984
3492
... More
Supplying,Installation,Testing and Commissioning of 55 Inches Ultra H.D LED Display Monitor as per the Specifications attached.
1
63850
63850
... More
Supply , Installation , Testing and commissioning of 16 Channel NVR (Network Vedio Recorder) Embadded Linux based for recording upto 16CH @ D1 with 02 nos. SATA HDDs minimum 20TB storage or more (recording requirement all cameras recording at D1, 25fps for 30 days), H.265 HEVC/H.264/MJPEG codec decoding, Front Control Pannel with LEDs Indication, 2 nos. USB, ONVIF S, Time Sync with NTP, Encrypted Streaming & Control, 2-Way Audio Line & Out, PTZ Operation Pan, Tilt, Zoom, Support, Pre & Post Alarm Recording Support, Recording/Evidance Clip Export to USB, 16 Channel Syncronous Playback, Playback control i.e Play, Pause, Stop, Fast Forward, Backward, Timeline & Zoom; Snapshot, Web Client, Central Monitoring Softawre, iPhone; iPad; Android based Mobile clients, 01HDMI & 01VGA Output, 02 On Board HDDS each up to 10TB, Alarm Input (1 nos.), Alarm Output (01 nos.), NDAA Section 889 Compliant, Operating Temperature –10°C to 55°C, Certification : Certifications: ONVIF compliant, UL/CSA, CE, FCC, EN, NDAA & RoHS compliant.including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge.
1
45371
45371
... More
Supply, Installation, Testing and Commissioning of 10TB 7200 rpm SATA 6 Gb/s 3.5" Internal Enterprise Hard Drive
2
60866
30433
... More
Supply, Installation, Testing and Commissioning of 10/100/1000 Mbps Unmanaged Switches with Provision of 16 10/100/1000 Mbps ports as per specification and as desired by the Engineer Incharge.
2
38670
19335
... More
Supplying and installing following size of perforated Hot
Dipped Galvanised Iron cable tray (Galvanisation thickness not
less than 50 microns) with perforation not more than 17.5%, in
convenient sections, joined with connectors, suspended from
the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.
as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
30
15390
513
... More
300 mm width X 50 mm depth X 1.6 mm thickness
20
16120
806
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements