Public Works Department Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 4,79,560Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_12636_4Tender No
56 of R and B Nyoma 2023-24Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Along external wall where the apron is not provided using chemical emulsion (Chlorophriphos/ Lindane E.C. 20% with 1% concentration) @ 7.5 litres/sqm of the vertical surface of the sub-structure to a depth of 300 mm including excavation of channel along the wall & rodding etc. complete:
107.55
3535
32.87
... More
Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match existing floor:
874.76
230875
263.93
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50
m : All Kinds of soil. (a) Pipes, cables etc, not exceeding 80 mm dia.
25
5575
223
... More
(b) Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
25
9105
364.2
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
93.65
517397
5524.8
... More
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
50
19409
388.18
... More
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
16
1157
72.37
... More
Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square meter on damp proof courses after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
50
8551
171.03
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete
96.8
60094
620.81
... More
Centering & shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases of columns etc. for mass concrete
.
22.56
7396
327.87
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
10
7173
717.31
... More
Suspended floors, roofs, landings, balconies and access platforms.
3.24
2574
794.5
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
255.82
160798
628.56
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
5.4
1635
302.87
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above:- Thermo-Mechanically Treated bars of grade Fe-500D or
more.
8065
798918
99.06
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
48
4754
99.06
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
500
35215
70.43
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level
35.64
320405
8990.06
... More
All works above plinth level upto floor V level
0.32
3382
10571.56
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverableseparately. Providing M-35 grade concrete instead of M-25 grade RMC/RMC.(Note : Cement content considered in M-35 is @ 350 kg/cum).
35.96
380153
10571.56
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein
2.52
2375
942.62
... More
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:6 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)
22.38
252580
11286
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. a)Granite of any colour or shade (Area of slab upto 0.5 sqm)
0.1
540
5406.56
... More
b)Granite of any colour or shade (Area of slab over 0.5 sqm)
3.24
15539
4796.06
... More
Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc.complete.
3.16
1685
533.25
... More
Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
5
4424
884.93
... More
Providing and fixing in wall lining of specified medium density board, pre-laminated one side decorative lamination other side balancing lamination Grade I, exterior grade, with necessary fixing arrangement and screws etc. complete. 12 mm thick
10
15093
1509.31
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood.
0.18
24051
133617.68
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required
size with necessary screws
5
18301
3660.37
... More
Providing and fixing fiber glass reinforced plastic (FRP) door frames of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminates shall be 2 mm thick and shall be filled with suitable wooden block in all three legs. The frame shall be covered with fiber glass from all sides. MS stay shall be provided at the bottom to steady
the frame
125.35
106210
847.31
... More
Providing and fixing 30 mm thick door shutters to existing door frames. Fiberglass reinforced plastic (FRP) Flush door shutter in different plain and wood finished made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of FRP laminate confirming to table- 3 of IS : 14856-2000, complete as per directions of engineer-in-charge
45.83
224475
4898
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of doorshutter to be measured).
25
15887
635.5
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
25
2926
117.06
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
224
45653
203.81
... More
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :
17
31502
1853.06
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: a)second class kail wood 50 x 20 mm
50
10046
200.93
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm
17
2173
127.87
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300X16 mm
16
5856
366
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm
34
4003
117.75
... More
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
Twin rubber stopper
16
1252
78.25
... More
Providing and fixing aluminum tee channels (heavy duty) with rollers, stop end in pelmets as curtain rods.
43.99
7923
180.12
... More
Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge.
241.74
158973
657.62
... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising ofuPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
72.04
614838
8534.68
... More
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi- hambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.
(Area of door upto 2.00 sqm).
4
46676
11669.06
... More
Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and
directions of Engineer-in-charge complete.
97.56
469775
4815.25
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
a)Hot finished welded type tubes
10705.19
2070704
193.43
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
304.5
50735
166.62
... More
Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875-1987, ISO 800- 1984 and IS:801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/ STAAD PRO-V8i/ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings design subject to minimum 12mm diameter and 121mm
4625.88
1408580
304.5
... More
Providing and fixing of external wall system on Light gauge steel frame work with . Outer face having 6mm thick heavy duty fiber cement board fixed on 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category IV type A (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be maintained and groves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern.Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm and internal face 12.5mm thick gypsum plaster board fixed on 8mm thick fiber cement board confirming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately).
819.83
3924140
4786.53
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
8.64
38627
4470.81
... More
Extra for pre finished nosing to treads of steps of marble stone
8.64
5440
629.68
... More
62mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 liter per 50kg of cement or as per manufacturer’s specifications, including cost of cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete
210
209187
996.13
... More
Cement plaster skirting upto 30cm height with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement and curing complete. 18 mm thick.
8
5095
636.93
... More
Providing and laying rectified Glazed Ceramic floor tiles of size
300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
In colour such as White, Ivory, Grey, Fume Red Brown
55.85
84895
1520.06
... More
Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 18 mm thick. Second class deodar wood
530.06
2034237
3837.75
... More
Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183. Density 16 kg/m³, 50 mm thick, wrapped in 200G Virgin Polythene bags placed over existing galvanum sheet/ false ceiling and held in position by criss-crossing GI wire.
695.67
241341
346.92
... More
Supply and installtion of double layered polycarbonate sheet as per architecture design and drawing.
70.11
105165
1500
... More
Kansal roof puff insulated panel 40kg/m3 dencity. Insulated Roof Panels: The roof shall be constructed of 60 +30mm thick PUF insulation & density of 40+ 2 kg/m3laminated with Pre-coated GI outside and inside of Skin. The top sheet shall be0.50mm high ribbed in trapezoidal shape top and bottom sheet shall be .50mm Micro Ribbed Pre-Coated PPGI sheet. The top side of the roof panels shall have 30 mm crest at 250 mm center to center pitch with a flute for capillary action in full length on one side of the crest portion, so as to prevent the water leakages in the event of valley filled with water. The top edge of the panels shall have overlap joinery systems. The bottom edges of the panels shall have tongue and groove systems for a continuous engagement for the full length of the roof panels. The color of the top side sheet will preferably be off White of 18-20 microns Pure Polyester coating over 4-7 microns Primer on the top side and 5 microns of backer coat over the primer on the bottom side of the sheet. Make: JSW & Synergy
Colour – Off White
903.41
2513286
2782
... More
12 mm cement plaster mix : 1:6 (1 cement : 46 fine sand)
50
15109
302.18
... More
15mm Cement plaster on the rough side of single or half brick
wall of mix: 1:6 (1 cement : 46 fine sand)
22.87
7964
348.25
... More
18mm Cement plaster in two coats under layer 12mm thick cement plaster 1 : 5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1 : 6 (1 cement : 6 fine sand)
10
4678
467.87
... More
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm
301.64
62493
207.18
... More
Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
585.37
60439
103.25
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
1
152
152.43
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1mm thick
887.01
143580
161.87
... More
Providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per National Building Code 2009 complete as per direction of Engineer-in-charge.
301.64
110080
364.94
... More
Design, manufacture, supply, Loading/ Un-Loading, installation, testing and commissioning of Main LT Panel Cum Synchronizing Panel fabricated out of 2mm thick for structural members (Load bearing members) and 1.6mm thick for door and covers (Non load bearing members) CRCA sheet in cubicle compartmentalize free standing floor mounted, dust and vermin proof with reinforcement of suitable size angle iron, channel 'T' irons and/ or flats wherever necessary, 16 gauge CRCA sheet steel shall be used for final distribution panels. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be (form-3b Construction) treated with all anticorrosive process before painting as per specifications with 2 coats of zinc chromate primer and final approved shade of enamelled paint. 2 Nos. earthing terminals shall be provided for all distribution panels. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system and with 15% spare space, lifting hooks shall also be provided in case of large panels.
Approval shall be taken for each panel before fabrication. Galvanized hardwares with zinc
passivation shall be used in fabrication of panels. Breaking capacity mentioned is Ics value. This BOQ to be read in conjunction with technical specifications and Single Line Diagram (attached for reference). If any discrepancy occurs that should be brought to the notice of Client/Consultant before quoting the price otherwise stringent condition will be deemed to
have been considered. All MCCBs shall be provided with rotary operating handle and ON/OFF lamps backed by
2Amp control MCB. All meters shall be digital type (unless otherwise specified) Multi-function meter to be provided as required to cover all the parameters as mentioned. All current/voltage transformer shall be cast resin type. All indicating lamps shall be LED type. Current density for bus bar shall not be more than 0.8A/Sqmm. Rating of Bus bar is after considering all derating factors. (Bus bar sizing calculation to be submitted for approval.) All internal control wiring shall be heat resistant type. All incoming breakers in Main LT panel shall be electrically interlocked.Bus bar chamber shall be provided at top only. Incoming and outgoing cable entry shall
be from top/bottom as required. All feeders shall be provided with door interlocked with door defeat, pad lock facility. Live parts shall not be accessible after opening the door, Transparent acrylic sheet to be
provided to cover the same. Spare contacts of MCCBs/ MCBs/ Relay/ Contactor shall be wired upto terminal block. 20% spare control terminal to be provided. All MCCBs shall be provided with variable O/L & S/C releases. Incoming MCCB shall be
provided with E/F releases also All incoming/outgoing cables shall be terminated on links/terminals. INCOMING : 1 No. Incoming from SEB. 1 No. Incoming from DG set 1 No. Incoming from Solar System 1 No. 160A, 4P, ATS (25KA) 1 No. 160A, 4P, MCCB (25KA) with inbuilt Thermal Magnatic based release for Over
load, Short circuit & Earth Fault protection. Metering:
One (1) Nos. (0-500V) Digital voltmeter with selector switch & control MCB's One (1) Nos. (0-150A) Digital ammeter with Selector Switch and suitable ratio, CL-1,
10VA CT's . Phase indication lamps each backed up with 2 Amps MCB and ON/OFF switch.
One (1) Nos.Multifunction Digital meter (consisting of Voltage, Amps, kWh, kW, P.F.
parameter) with RS 485 Port. Sets of RYB phase indicating lamps with control MCBs. Protection:
Undervoltage Relay (Inside Breaker).
Overvoltage Relay (Inside Breaker).
Under Frequency (Inside Breaker).
Over Frequency (Inside Breaker).
Maximum Demand (Inside Breaker).
Leading & Lagging Power Factor (Inside Breaker).MAIN BUS BAR One sets of 200A, TPN, 25kA, TPN AL. Bus Bar with PVC Sleeve in sealed Bus
Chamber. OUTGOINGS : Four (4) Nos. 100 A, 4P MCCB.(15KA)
Four (5) Nos. 63 A, 4P MCCB .(15KA)
Two (2) Nos. 63 A, 4P MCCB .(15KA) Main LT Panel described above.
1
331994
331994
... More
UPS Panel : (VTPN DB) INCOMING : 1 No. 63 A,4P MCCB (15KA) with inbuilt Thermal Magnatic based release for Over load,
Short circuit & Earth Fault protection. OUTGOING : 3 Nos. 63A DP RCCB (10KA) UPS Panel described above.
1
40357
40357
... More
DP MCB IN INSULATED ENCLOSURE FOR UPS
63 Amp 4P MCB with MS Enclosure
2
10000
5000
... More
PLUMBING PANEL INCOMING : 1 No. 100A, TP+N MCCB (15KA) with inbuilt Thermal Magnatic based release for Over
load, Short circuit & Earth Fault protection as approved by architect and complete in all respect. BUS BAR : One set of 150 A TPN Alu. Bus Bar, 15kA with PVC Sleeve in sealed Powder Coated Bus
Chamberas approved by architect and complete in all respect. METERING AND INDICATION : 1 No. digital Multi Function Meter ( A,V, KWH) and CT's & control MCB's (Eqv. To
EM6436) One set of R/Y/B phase indication Lamp with control MCBs.
1 Set of ON/OFF Indicating lamps . OUTGOING : 2 Nos. 32A TP MCCB with DOL Starter for 1.5 K.W 6 Nos. 25A TP MCCB with DOL Starter for 0.7 &0.4 K.W 2 Nos. 63A TP MCCB with Star Delta Starter for 7.5 K.W 1 Nos. 63A TP MCCB 1 Nos. 32A TP MCCB PLUMBING PANEL described above.
1
237574
237574
... More
WIRING IN MS CONDUIT Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C
131
222464
1698.2
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit,and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
70
69286
989.8
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC
insulated copper conductor single core cable for loop earthing as required.
880
326480
371
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
FOR LIGHTING CIRCUIT/ SUB MAIN WIRING 2x1.5 sq mm + 1x1.5 sq mm earth wire
1370
398944
291.2
... More
2x2.5 sq mm + 1x2.5 sq mm earth wire
120
38472
320.6
... More
2x6 sq mm + 1x6 sq mm earth wire
30
14952
498.4
... More
2x10 sq mm + 1x10 sq mm earth wire
50
29820
596.4
... More
4 X 10sq.mm + 2 X 6 sq.mm earth wire
50
46900
938
... More
4 X 16sq.mm + 2 X 6 sq.mm earth wire.
90
119196
1324.4
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20mm dia
40
8176
204.4
... More
25mm dia
2100
485100
231
... More
32mm dia
100
28420
284.2
... More
40mm dia
100
40880
408.8
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non
residential buildings
24
13473
561.4
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
51
35343
693
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box
excluding modular plate as required.
15
672
44.8
... More
Supply and fixing following size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 module (75mmX75mm)
20
6804
340.2
... More
3 Module (100mmX75mm)
90
33642
373.8
... More
6 Module (200mmX75mm)
15
6993
466.2
... More
8 Module (125mmX125mm)
6
3217
536.2
... More
12 Module (200mmX150mm)
2
1215
607.6
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as
required.
2
257
128.8
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
6 way, Double door
1
2325
2325.4
... More
12 way, Double door
1
2874
2874.2
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way (4 + 36), Double door
2
19132
9566.2
... More
Supplying and finishing 5 amps to 32 amps rating, 240 volts 'C' series, miniature circuit breaker suitable for inductive and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
74
20616
278.6
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as
required.
15
168
11.2
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 A
1
2095
2095
... More
63A
7
18480
2640
... More
Supplying and fixing following rating, 'C' series, four pole, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63amps
2
5554
2777
... More
Supplying and fixing following rating, 'C' series, Double pole, 240 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
1
1389
1389
... More
63 amps
1
1500
1500
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as
required.
12
134
11.2
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required. 6 way, Double door
1
1052
1052.8
... More
12 way, Double door
1
1271
1271.2
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
12 way (4 + 36), Double door
2
3808
1904
... More
MV CABLES, FIRE SURVIVAL CABLE & CABLE TRAY With Sand & Protective Covering Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
Upto 35 sq. mm
50
22610
452.2
... More
Above 35 sq. mm and upto 95 sq. mm
60
28392
473.2
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of
1.1 KV grade of following size on cable tray as required.
Upto 35 sq. mm (clamped with 1mm thick saddle)
194
45357
233.8
... More
Above 35 sq. mm and up to 95 sq.mm (clamped with 25x3 mm MS Flat clamp)
74
18751
253.4
... More
Supplying and making end termination with brass compression gland and aluminium lugs
for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 70 sq. mm (32mm)
2
1030
515.2
... More
3½ X 35sq. mm (35 mm)
2
840
420
... More
4 X 16 sq. mm (28mm)
2
700
350
... More
3C x 16 Sqmm
6
2100
350
... More
3C x 10 Sqmm
4
1220
305.2
... More
3C x 6 Sqmm
4
680
170
... More
Supply, loading, transportation unloading at site, storages at site, shifting from storage place to site of following sizes of XLPE insulated PVC sheathed, FRLS, Aluminium/Copper conductor armoured power cable of 1.1 KV grade conforming to IS amended upto date and as per specifications.
Aluminium conductor 3½ X 70 sq. mm (32mm)
80
25440
318
... More
3.5 C x 35 Sq.mm
60
14700
245
... More
Copper conductor:-
4C X 16 Sq.mm
40
6520
163
... More
3C x 16 Sqmm
180
24480
136
... More
3C x 10 Sqmm
60
7680
128
... More
3C x 6 Sqmm
70
7070
101
... More
Supplying and laying of following 1100 volts grade PVC insulated sheathed copper conductor armoured control cables in existing trenches cables trays, clamped on wall with suitable saddles, fixing bolts, including testing and commissioning.
2 core 2.5 Sq.mm PVC insulated copper conductor armoured control cables
15
1635
109
... More
4 core 2.5 Sq.mm PVC insulated copper conductor armoured control cables
15
2580
172
... More
7 core 2.5 Sq.mm PVC insulated copper conductor armoured control cables
15
4065
271
... More
10 core 2.5 Sq.mm PVC insulated copper conductor armoured control cables
15
5355
357
... More
Supplying of all materials and making terminations of control cable terminations for control cables above item complete with single brass compression glands, copper lugs etc. as required.
2 Core x 2.5 Sq.mm Cable
3
1050
350
... More
4 Core x 2.5 Sq.mm Cable
3
1275
425
... More
7 Core x 2.5 Sq.mm Cable
3
1575
525
... More
10 Core x 2.5 Sq.mm Cable
3
1872
624
... More
CABLE TRAY
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
150 mm width x 50 mm depth x 1.6 mm thickness
250
185850
743.4
... More
300 mm width X 50 mm depth X 1.6 mm thickness
160
133728
835.8
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
150 mm width x 50 mm depth x 1.6 mm thickness
12
15909
1325.8
... More
300 mm width X 50 mm depth X 1.6 mm thickness
5
9380
1876
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
150 mm width x 50 mm depth x 1.6 mm thickness
7
10505
1500.8
... More
300 mm width X 50 mm depth X 1.6 mm thickness
5
10843
2168.6
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with
G.I. suspenders including G.I. bolts & nuts, etc as required. 150 mm width x 50 mm depth x 1.6 mm thickness
5
8918
1783.6
... More
300 mm width X 50 mm depth X 1.6 mm thickness
4
12286
3071.6
... More
Earthing with G.I. earth plate 600mm x 600mm x 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering
pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
12
104428
8702.4
... More
Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering
pipe of 2.7 meter long etc. with charcoal / coke and salt as required.
4
66046
16511.6
... More
Providing and fixing earth bus of 25 mm X 5 mm GI strip on surface for connections etc.
as required.
200
57680
288.4
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required
150
211890
1412.6
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as
required.
100
5180
51.8
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including
holes etc. complete as required
18
11289
627.2
... More
Jointing copper/ G.I. tape (with another copper/ G I tape, base of the finial or any other
metallic object) by riveting/ nut bolting/ sweating and soldering etc. as required.
18
2343
130.2
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for
lightning conductor complete as required. (For horizontal run)
390
56784
145.6
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run).
180
41076
228.2
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as
required.
120
29568
246.4
... More
Pendant luminaire Ring with HPE (High Performance Efficiency) LED (Light Emitting Diode) system power: 60 W, Luminous flux of luminaire 5400 lm, Colour temperature of 4000 K, Warm white, CRI 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire profile in aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment, Opal diffuser for a homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE
) internal wiring, Electronic control gear
Protection class I, IP20 Ø = 1200 mm, W = 100 mm, H = 105 mm, PL = 1500 mm
1
56655
56655
... More
Surface Mounted luminaire Zing with LED (Light Emitting Diode) system power: 15 W, Luminous flux of luminaire 1650 lm, Colour temperature of 4000 K, neutral white, CRI 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire housing in die-cast aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment, Opal protruded diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear
Protection class II, IP 20 Ø = 170 mm, H = 43 mm
67
137685
2055
... More
COB based pendant downlight luminaire Rea 100 with system power: 15 W, Luminous flux of luminaire 1350 lm, Colour temperature of 4000 K, neutral white, CRI 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours; Energy efficient LEDs, Direct light emission, Luminaire housing in aluminium, Polyester powder black coloured coat applied over a 5- stage pre- treatment, Clear acrylic with reflector and a elliptical beam angle of 50x80°, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear Protection class I, IP 20 Ø = 100 mm, H = 185 mm, PL (max) = 1000 mm
2
13884
6942
... More
Ceiling Mounted luminaire Vela S with HPE (High-Performance Efficiency) LED (Light Emitting Diode) maximum system power: 36 W, minimum Luminous flux of luminaire 4500 lm, Colour temperature of 5700 K, Cool white, CRI 80, THD
10% , SDCM 3 , R90 230 V constant current driver, 70 % of luminous flux after 50,000 operating hours, Energy-efficient LEDs, Direct light emission, Luminaire profile in aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment, opal diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Protection class I, IP 20, L = 1152 mm, B = 28 mm, H = 43 mm.
105
333375
3175
... More
Building Outer Light (45W LED) :- Supply, fitting, fixing and testing of building outer lighting luminaire aerodynamically shaped single piece pressure die-cast Aluminum luminaire with high power LEDs as light source and electronic driver (IP66), along with 45W LED Lamp as Energy saving as per drawing prescribed reflector and heat resistant toughened flat glass cover, with 5ft long 40mm dia G.I. pipe with 3 Nos. of iron clamps , anchor nut bolts with double washers as per direction of E/I or consultant as per drawing prescribed reflector and heat resistant toughened flat glass cover. (Make:- Philips/Trilux/Hevells-Endura Pearl Neo/Wipro.
6
112062
18677
... More
1x20W LED WALL MOUNTED TUBE LIGHT
3
2616
872
... More
SUPPLY OF CEILING/PROPELLER TYPE EXHAUST FANS (WITH GRAVITY
LOUVERS) / CABIN FAN.
450 mm dia 960 RPM exhaust fan
4
18000
4500
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC
Supply, earthing etc. complete as required.
1
3822
3822
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as
required.
1
478
478.8
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy
gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
1
56
56
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
One Loop Panel.
1
180000
180000
... More
Supply, installation, testing and commissioning of Hooter Cum Strobe with all required
accessories for mounting complete as required.
7
34241
4891.6
... More
Supply, installation, testing and commissioning of Manual Call Point complete as
required.
7
37818
5402.6
... More
Consider all plumbing fixtures with following flow-rates at 3.1 bar or 45 psi pressure. Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
1
7365
7365.33
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including
providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
5
96967
19393.43
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre &
post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable
brackets all as per manufacturers specification and direction of Engineer-in-charge.
4
38717
9679.46
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
6
36991
6165.32
... More
Providing, Fixing,testing and commissioning of 15 mm dia CP brass two way bib cock with flow 6 LPM (Litre per Minute) at 3.1 bar or 45 psi test pressure with C.P. wall flange of approved quality as approved by architect and complete in all respect.
5
6080
1216
... More
Providing & fixing S.S. health faucet for ablution with 1.2 meter long PVC tube, hand shower, couplings, wall hook and other accessories of quality and make as approved by architect.
5
8445
1689
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
6
7417
1236.27
... More
Providing and fixing toilet paper holder : C.P. brass
5
4086
817.25
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore
32
3263
101.99
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
32
23833
744.8
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm dia
4
566
141.54
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
6
10777
1796.27
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
3
665
221.97
... More
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
3
2501
833.7
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes
75
50205
669.41
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 20 mm nominal outer dia Pipes
55
23635
429.73
... More
25 mm nominal outer dia Pipes
12
6202
516.88
... More
32 mm nominal outer dia Pipes
58
39020
672.77
... More
40 mm nominal outer dia Pipes
80
72643
908.04
... More
50 mm nominal outer dia Pipes
15
18973
1264.9
... More
65 mm nominal outer dia Pipes
15
32592
2172.8
... More
Providing and fixing insulation to Pipes with 50mm thick resin bonded preformed mineral wool pipe sections of density not less than 144 kg/cum. as per IS:9842 and applying 26g Aluminium sheet as cladding, properly rolled and grooved with joints sealed with a strap of roofing felt (type-III Grade-I conforming to IS:1322) complete with self tapping screws centre to centre distance of 150mm to close cladding joints. The pipes shall be painted with zinc chromate primer before applying insulation.25mm nominal bore
142
52185
367.5
... More
32mm nominal bore
58
24360
420
... More
40mm nominal bore
80
37800
472.5
... More
50mm nominal bore
15
8662
577.5
... More
65mm nominal bore
15
9450
630
... More
roviding and fixing of gun metal gate valve with CI wheel of approved quality (screwed ends) 32 mm dia, nominal bore
2
1627
813.75
... More
40 mm dia, nominal bore
2
1899
949.76
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore
1
540
540.96
... More
25 mm nominal bore
2
1103
551.6
... More
BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified 80 nominal bore
1
4221
4221
... More
65 nominal bore
1
3971
3971.8
... More
50 nominal bore
2
7123
3561.6
... More
40 nominal bore
2
6678
3339
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
External work 25mm dia
20
10207
510.37
... More
32mm dia
20
11891
594.58
... More
40mm dia
20
13528
676.41
... More
50mm dia
20
15827
791.35
... More
65mm dia
20
20048
1002.4
... More
Providing and fixing gun metal non- return valve of approved quality
(screwed end) 32 mm nominal bore
2
1796
898.45
... More
40 mm nominal bore
1
1109
1109.36
... More
50 mm nominal bore
1
1601
1601.67
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with
C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
2
4430
2215.43
... More
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
2
847
423.57
... More
Providing and fixing brass stop cock of approved quality 15mm nominal bore
4
1694
423.57
... More
Providing, Fixing,testing and commissioning of Vertical Storage Water Heater (Geyser) with Flexi Pipe, 5 Star 6 Litre capacity
3
29238
9746
... More
Supply & Installation of SOVISY - SMC Panel Tank confirming to: IS 14399 (Part 1& 2): 1996 & IS 4249 :1967 (50mm Insulated ) (Capacity -? )
3000
135000
45
... More
Providing, jointing, testing and fixing UPVC Soil, Waste & Vent system Class Bconforming to IS : 13592 and UPVC fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offset and other specials. Jointing shall be done with pushfit EPDM ring jointing technique in general. Solvent cement joints may be provided for fittings and specials which are not manufactured with pushfit rubber joints.Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection and also pipes may be laid / fixed in sunken floors, under slung from ceiling. The pipes laid in sunken floor shall be encased with not less than 75 mm thick cement concrete (1:2:4) all around.The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications. (All major MS structure to hold the stack is included in this item) as approved by architect and complete in all respect. 110 OD Type B
65
53761
827.1
... More
Providing, fixing, jointing and testing UPVC soil, waste, vent pipework comprising UPVC pipe conforming to IS :4985-1983 of class 3 ( 6kg/cm2) as specified below and fittings (moulded as well as fabricated) like elbows, bends, reducers, threaded tail pieces, caps, suitable elbow with suitable extension piece for drain point and other specials jointing with cement solvent, chasing, cutting and making good the walls & floors pipes laid in floors shall be encased with 40 mm thick concrete all around, complete in all respects including testing of complete installation.(All major MS structure to hold the stack with fixing including anchor fasteners, sand, cement etc is included in this item) as approved by architect and complete in all respect. 40 mm dia 6 kg/cm2 (Class III )
7
3243
463.3
... More
50 mm dia 6 kg/cm2 (Class III )
15
8227
548.5
... More
Providing and fixing UPVC/SWR trap (P trap) of self cleaning design as per IS:13592 : 1992 complete including cost of cutting and making good the cutouts in walls and floors etc.including cutting and making good the walls and floors wherever required complete as approved by architect and complete in all respect. as approved by architect and complete in all respect.110 mm inlet and 110 mm outlet
7
4492
641.8
... More
Providing and fixing floor drain made out of 110x63 mm OD uPVC. elbow connected to uPVC pipe complete as per direction of Project Manager as approved by architect and complete in all respect as approved by architect and complete in all respect.
3
392
130.7
... More
Providing and fixing Inlet Fitting for Urinal trap, formed out of 110 mm PVC pipe with multiple side inlets formed with saddle pieces, suitable for 40, 50 and 63 mm dia side connections as per standard detail and support through galvanized steel support from slab or set in cement concrete mix 1:2:4 including cutting and making good the walls and floors wherever required as approved by architect and complete in all respect..
2
1304
652.3
... More
Providing and fixing Heavy Class SS grating of approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and FT, UT & FD as approved by architect and complete in all respect..Size 100 mm X 100 mm
6
3154
525.8
... More
Providing and fixing P.V.C. WC connector (straight or bend type) with rubber lip ring. Including 110 mm dia PVC pipe / bend of required length and proper connection with M seal to C.I. pipe complete as required as approved by architect and complete in all respect..
5
1242
248.4
... More
Providing and fixing cleaning eye 110mm dia on horizontal UPVC soil & waste pipes of 300 mm long UPVC pipe with one plain end lead caulked in to the collar of UPVC pipe and the other end with flange which in covered by neoprene rubber gasket and blank flange, complete with nuts, bolts etc and hot dip galvanization after fabrication to the satisfaction of Project Manager as approved by architect and complete in all respect.. 100 mm dia
1
203
203.9
... More
DWC ID SN-8 & SN-4 Pipe(HDPE Black Pipe) with Coupler & Rubber Ring as per IS:16098(PART 2) 150 mm Dia
5.75
3826
665.5
... More
200 mm Dia
11.5
10255
891.8
... More
250 mm Dia
28.75
37855
1316.7
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.150 mm Dia pipe sand filling
1.62
4901
3025.68
... More
200 mm Dia pipe sand filling
3.25
9833
3025.68
... More
250 mm Dia pipe sand filling
8.12
24568
3025.68
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
9689
3229.8
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
61068
15267.07
... More
Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
0.5
5252
10504.2
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, outside plastering with cement mortar 1:3(1 cement : 3 coarse sand), foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :0.91 m deep with SFRC cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering ,excavation,refilling ,disposal of surplus earth in all kinds of soil,footrest etc. all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be including in this item.) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
15453
15453.2
... More
.Supplying & laying of 2X1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer
sheath complete as required
320
146944
459.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements