Public Works Department Tender

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS : 12823 Grade -I type -II )in panelling fixed in aluminium doors , windows shutters and partition frames with C.P brass /stainless steel screws etc, complete as per architectural drawings and directions of Engineer -in -charge. Pre -laminated particle board with decorative lamination on one side and balancing lamination on other side Venue preparation room.

Providing and fixing wall panelling Tongue and Groove wooden.

Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit

French spirit polishing, Two or more coats on new works including a coat of wood filler

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On concrete work

Providing and fixing green shade net , Hassain cloth (first class quality ) Including fixing of net , fixing of posts , carriage

Providing and fixing of different colour fine decorated cloth for entire area decoration :1500 mtr Including labour charge for fixing , stitching ,carriage complete job (Minimum 1.0 m width cloth )

Providing and fixing of carpet for VIP area , VIP lounge .

Providing and fixing of carpet for Players changing room player Lounge.

Providing and fixing of red carpet for Entrance area , cooridor stairs ,VIP sitting Area.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and laying factory made Precast concrete solid blocks of 200mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Material required for setting of venue from tent house a) Shaminya 10 set for 10 days

Material required for setting of venue from tent house a) kanat 100 set for 10 days

Ballies required for setting of kanat

Material required for setting of venue from Tent house a) Tarpal 20 Nos for 10 days

Providing and fixing of white cloth for VIP Lounge . Including stitching carriage complete job

Structural steel work in built up sections , trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of approved steel primer all complete

Providing and fixing of Indian Flag of size (6'-0" x 4'-0"), including labour charge for fixing , stitching , carriage and complete job.

Engagement of 20 labour for cleaning .

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Thickness above 10 mm upto 25 mm

Engagement of 4 first class carpenter for Re-Fixing of paneling

Providing wood work in frames of doors , windows , clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners shall be paid for separately) Second class kail wood

Mirror of superior make glass 60 x 45 cm Frameless mirror

Carriage of materials Earth avg lead 20 km

Earth avg lead 30 km