Military Engineer Services Tender

All as per Item No 2 above but for 5 Amps Switch Socket Combination on independent board with 1.5 Sqmm Cable

All as per item No 2 above but for power point 3/5 pin switch socket 15 Amp with PVC copper conductor cable FRLS multistranded unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand PVC copper conductor FRLS cable for earth continuity in and including PVC casing and capping fixed on wall incl including PVC box

Supply and fixing piano type switch single pole one way 6 Amps complete all as specified and directed

Supply and fixing switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

Supply and fixing switch socket combination 5 amp-2/3 pin complete all as specified and directed.

Supply and fixing socket outlet 5 amp -2/3 pin complete all as specified and directed.

Supply and fixing bell push single pole 230 volt complete all as directed.

Supply and fixing bell ding-dong single pole complete all as directed.

Supply and fixing in repair decorative durable LED batten fitting 18 Watt , decorative and caps, powder coated CRCA decorative for LED tube 1x18 W LED including LED retrofit , 4 feet long (white colour) tube of 18 watt having driver ,connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site or directed by Engr in Charge. Make: Crompton / Philips/ Bajaj/Wipro/Havells

Supply and fixing in repairs LED Mirror light fitting 9/10 watt 230 volts box type , with standard specification etc warm white colour complete confirming to Crompton cat part No- LCL-07-CDL or equivalent of Philips/Wipro/Bajaj/Havells.

Supply and fixing in repairs Lamp LED 7 Watt, 230 volts 50 Hz AC complete all as specified. Make: Bajaj/Crompton/Havells/Wipro

Supply and fixing in repairs LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified. Make: Bajaj/Crompton/Havells/Wipro

Supply and fixing ceiling rose surface bakelite 65x50 mm two to three terminals. Make: Anchor/Plaza/Cona

Supply and fixing lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified. Make: Anchor/Plaza/ cona.

Supply and fixind in repairs exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of 250 mm sweep all as specified and directed.

Supply and fixing in repairs sheet metal enclosure SPN for DBs with 200 Amps bus bar of 12 way 240 volts with blank plate double door all as directed by Engr-in-Charge. Make :Legrand or equivalent in L&T / Havells.

Supply and fixing in repairs sheet metal enclosure TPN for DBs with 200 Amps bus bar of 8 way 415 volts with blank plate double door all as directed by Engr-in-Charge. Make :Legrand or equivalent in L&T / Havells.

Supply and fixing in repairs MCB single phase (SP), 6 to 32 Amps 240 Volts, C Curve. Make : Iegrand /L&T/Havells

Supply and fixing in repairs MCB SPN,C- curve, 230 volt 40-63 amp 10KA Make : Iegrand /L&T/Havells

Supply & fixing in repairs MCB TPN,C- curve, 415 volt 40-100 amp 10KA Make : Iegrand /L&T/Havells

Material & labour in replacement sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 6 Sqmm along with one run of 6 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping. Make:Havells/Finolex/Anchor

Supply, laying, connecting and testing ISI marked XLPE insulated GI strip armoured heavy duty electric cable with multistranded aluminium conductor 1100 volt of size 300 sq mm 3.5 core laid in trenches/ducts/wall or through pipe or pole and marking both ends connection with suitable size of cable glands, crimping type cable lugs complete all as specified & directed by Engr-in-Charge.

Supply, laying, connecting and testing ISI marked XLPE insulated GI strip armoured heavy duty electric cable with multistranded aluminium conductor 1100 volt of size 240 sq mm 3.5 core laid in trenches/ducts/wall or through pipe or pole and marking both ends connection with suitable size of cable glands, crimping type cable lugs complete all as specified & directed by Engr-in-Charge.

Supply, laying, jointing & testing XLPE insulated, armoured, heavy duty electric cables with stranded aluminium conductor rating 1100 volts grade of size 95 Sqmm 3.5 core laid in trences or passing through pipes.ducts or fixed to walls/poles completer all as specified.

Supply and fixing XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 Core all as specified and directed.Make: Finlolex/Polycab/Havells.

Supply and fixing XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 4 Core all as specified and directed.Make: Finlolex/Polycab/Havells

Supply and fixing XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 Core all as specified and directed.Make: Finlolex/Polycab/Havells

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 meter in depth for foundation of poles, stays or for taking out/laying of cables and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Removing excavated materials (soil) to a distance n. exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

Material & labour for sand cushioning to underground cable with clean dry river sand complete all as specified and directed by Engr-in-Charge. Note:- Punned thickness 18 cm only shall be measured & Paid.

Supply and fixing in repairs factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-I flate size 250 x 150x40mm , complete all as specified and directed by Engr in Charge.

Supply & laying steel tubing, galvanized light grade, for passing LT/HT cable under road or PCC floor or fixed on wall/on pole or drain etc or wherever protection is required including necessary clamps and nut bolts with GI fitting complete all as specified of following bores:- (a) GI Pipe 40 mm dia.

(b) GI Pipe 50 mm dia.

(c) GI Pipe 80 mm dia.

Horizontal boring in soft/loose soil/under roads of any width by manual arrangements for inserting GI pipe up to 100mm bore for passing cables complete all as specified and directed by Engr-in-Charge. Note : GI pipe shall be measured and paid separately.

Supply and fixing of OFF Load Change Change over ( Surface type) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 200 Amps with connecting acessories complete all as specified and directedby Engr in Charge.

Supply and fixing cable route indicator embedded in PCC for LT cable on the plate of size 100 mm dia CI cable route marker with 25 x 25 x3 mm thick 600 mm long MS Support Angle, grouting luggs with PCC 1:2:4 in size of 100 x100 x 100 mm including excavation and making good surfaces complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repairs twin core flat or round sheathed stranded copper conductor cable 1.5 Sqmm all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs junction box made of mild steel 1.6 mm thick of size 250mmx200mmx105mm incl 4 Nos aluminium bus bar of 2 mm thick duly fitted on the suitable insulator with fixing with 35x6mm ms flate iron with nut bolt and washer and incl one MCB SP 6 amp with rail fitted in ms box incl suitable size cable hole, gland duly painted with two coats of aluminium paint over a coate of red oxide primer complete all as specified and directed by Engr-in-Charge. Make Sintex Industries Ltd. Cap Part No. GSMB - 2520 or equivalent approved make.

Supply and fixing in repairs LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. and all as specified and directed by Engr-In-Charge.

Supply and fixing in repairs LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. and all as specified and directed by Engr-In-Charge.

Supply and fixing in repairs switch fuse unit Triple Pole with Neutral Link, 415 Vac, 50 Hz, 63 Amps capacity complete all as specified and directed.

Supply & Fixing Street light bracket fabricated out of GI Tubing light grade 50 mm bore bend to the shape as directed and not less than length 1.0 Mtr complete with Mounting MS Clamp of Flat Iron size 40x5mm of suitable length of 02 Nos incl nut bolts etc of suitable size complete all as specified and directed by Engineer-In-Charge.

Dismantling cross-arms of M.S. channel or angle sections etc. complete

Dismantling insulators any type, any size

Dismantling of ACSR or AAC conductors service feeder or distributor span

Material & labour for wiring with 2 x 1.5 sqmm (Nominal Area) FRL-SH PVC insulated unsheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable size including continuous earth wire FRLS PVC insulated unsheathed 1x1 Sqmm (nominal area) copper multistranded conductor, 1100 Volts grade, connecting to common earth and earth dolly from street light juction box to street light fitting complete all as specified directed Engr-in-Charge .

Supply,install, test and commission, outdoor type ,LT panel box ,cubicle type, factory fabricated,CPRI approved , panel board made with 3 mm thick CRCA Sheet , weather and vermin proof ,floor mounted , IP-52 protection Class 7 tank process ,powder coated in siemens gray colour inside and outside, 3 phase, 4 wire system copper bus bar mounted on hygroscopic insulator housed in separate bus bar chamber covered with R-Y-B and black PVC heat shrinkable sleeve, with 50mmx50mmx6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrangement including necessry bus bar tappings, copper control wiring of required size, connecting cable with necessary cable glands, lugs etc, independent chamber to accomodate the MCCBs/MCBs,measuring instruments,Bus bar and cable gallary chamber ,proper arrangements for ventilation complete with provn for connecting earthing at both sides of panel board and comprises of following:- a) MCCB 250 A, 415 V, Ics = Icu = 25 kA, 50 Hz FP with adjustable overload settings (0.40- 1 X In), adjustable short-circuit settings (1.5- 10 X Ir) and microprocessor based trip unit 05 Nos. -02 No (Incoming) b) MCCB, 4 pole, 63 Amps ,36 KA,thermal magnetic release adjustable overload - 06 No. c) Digital ammeter 0- 1000 A with selector switch flush mounting square type with suitable CTs -03 No. d) Digital voltmeter 0-500 V with selector switch flush mounting square type - 03 No. e) LED phase indicators (Yellow, Blue, Red)- -05 set. f) Busbar,Aluminium , 315 Amps for phases and neutral duly colour coded sleeves mounted on hygroscopic pvc insulator-01 set

Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected using galvanised iron strip 25×4mm as earthing leadby means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed by Engineer-In-Charge. Note: Earth pit chamber and RCC pit cover shall be painted with two coats of red synthetic enamel paint over one coat of primer including preparing of surfaces.

Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected using galvanised earth lead wire 4.0mm dia as earthing leadby means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed by Engineer-In-Charge. Note: Earth pit chamber and RCC pit cover shall be painted with two coats of red synthetic enamel paint over one coat of primer including preparing of surfaces.