Ladakh Autonomous Hill Development Council Tender
... More
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required in the given tender can be determined using the following formulas and values: For Road work:
- 33% of advertised cost for work valuing up to 40.00 Cr
- 40% of advertised cost for work valuing more than 40.00 Cr For Other similar nature of works:
- 33% of Advertised Cost For Road & Bridge:
- Should have either executed under separate contracts both Road & Bridge work up to the aggregate value of 33% of the total advertised cost for works valuing up to 40.00 Cr and 40% for works with advertised cost beyond 40.00 Cr
- OR Should have executed both road and bridge work under one single contract at least 33% of the advertised cost of work For Building:
- 33% of Advertised Cost For Other works:
- 25% of Advertised Cost Additionally, the bidder should have liquid assets and/or credit facilities of not less than 10% of the value of the contract/contracts applied for. The construction cash-flow may be taken as 10% of the estimated value of the contract/contracts. The bidder should also have an average financial turnover on the execution of Civil Engineering works, which is indexed at the rate of 8% per year to bring it to the current price level. However, for the specific work "Construction of museum at Lamayuru monastery", the bid capacity required can be calculated as 10% of the contract value. The value of work (with GST) is 55533043/- and (without GST) is 47061849/-. The bid capacity required would be 10% of 47061849/- which is 4706184.9. The bidder should have liquid assets and/or credit facilities to meet this requirement. The bidder should also be able to invest a minimum cash amount of up to 25% of the contract value of work during implementation/execution. For the specific work "Construction of museum at Lamayuru monastery", this would be 25% of 47061849/- which is 11765462.25. The bidder should have an average financial turnover as per the value given, during the last five financial years. The information supplied should be duly certified by a Chartered Accountant and be duly supported by TDs and Income Tax Returns. The base year shall be taken as 2020-2021, and the following enhancement factors will be used for determination of available bid capacity for the cost of works executed: - Year before one: 1.08
- Year before two: 1.17
- Year before three: 1.26
- Year before four: 1.36
- Year before five: 1.47 The applicant should indicate actual figures/amount for the works executed by them without accounting for the above-mentioned factors. In case the financial figures and value of completed works are in foreign currency, the above-enhanced multiplying factors will not be applied. Instead, the current market exchange rate will be applied for the purpose of conversion of amount from foreign currency into Indian rupees. The bidder should have access to lines of credit and other financial resources equivalent to a minimum of 10% of the proposed bid/estimated cost. The bidder should have a positive net worth, which shall be judged from the audited balance sheet of the latest financial year. The bidder should have a minimum amount of liquid assets or credit facilities to participate in the bidding process. The amount is usually equivalent to the estimated cash flow for three months in the peak construction period. However, the exact formula for calculating the bid capacity is not explicitly mentioned for all cases. But, the bid capacity required can be determined using the above formulas and values for the given tender. Therefore, the answer is: The bid capacity required is 10% of the contract value, and the bidder should have liquid assets and/or credit facilities to meet this requirement. For the specific work "Construction of museum at Lamayuru monastery", the bid capacity required would be 10% of 47061849/- which is 4706184.9. The bidder should also be able to invest a minimum cash amount of up to 25% of the contract value of work during implementation/execution. For the specific work "Construction of museum at Lamayuru monastery", this would be 25% of 47061849/- which is 11765462.25. The bidder should have an average financial turnover as per the value given, during the last five financial years. The information supplied should be duly certified by a Chartered Accountant and be duly supported by TDs and Income Tax Returns. The base year shall be taken as 2020-2021, and the following enhancement factors will be used for determination of available bid capacity for the cost of works executed: - Year before one: 1.08
Technical Capacity
... View More
The bidder should have prior work experience in civil works or similar nature of contracts. The experience should be supported with a certificate of experience/performance issued by a competent authority. For road work, the bidder should have completed or substantially completed works valuing up to 40.00 Cr with 33% of the advertised cost, or works valuing more than 40.00 Cr with 40% of the advertised cost. For other similar nature of works, the bidder should have completed or substantially completed works with 33% of the advertised cost. For road and bridge works, the bidder should have either executed under separate contracts both road and bridge works up to the aggregate value of 33% of the total advertised cost for works valuing up to 40.00 Cr, and 40% for works valuing more than 40.00 Cr. Alternatively, the bidder should have executed both road and bridge works under one single contract with at least 33% of the advertised cost of work. The substantially completed works mean those works which have been completed in full as on the date of submission of bid, with a gross value of work done up to the last date of submission of bid being 100% of the original contract price. The bidder should have completed similar works with a value of at least 5 Crores. The tables provide the following information:
- For road work: 33% of advertised cost for works valuing up to 40.00 Cr, and 40% of advertised cost for works valuing more than 40.00 Cr.
- For other similar nature of works: 33% of advertised cost.
- For road and bridge works: 33% of advertised cost for works valuing up to 40.00 Cr, and 40% of advertised cost for works valuing more than 40.00 Cr.
- For building works: 33% of advertised cost.
- For other works: 25% of advertised cost. The bidder should demonstrate prior work experience, specifically for personnel with adequate experience as required, the bidder should have a Project Engineer with B.E Civil + 3 Years Exp Or Diploma in Civil with 5 years experience. The bidder should also demonstrate availability of key and critical equipment for this work, as well as liquid assets and/or availability of credit facilities of no less than the amount indicated in the Appendix to ITB. The bidder should have completed similar works with a value of at least 5 Crores, and the percentage of similar works completed is not explicitly mentioned, but it is required that the bidder should have completed substantially (100%) of the original contract price. The bidder should also have experience in executing works of a certain value, with specific requirements for different value ranges: - Up to 5 Crores: Not specified - Up to 15 Crores: Not specified - Up to 30 Crores: Not specified - Above 30 Crores: Not specified The bidder should also have experience in executing works with specific equipment, such as tipper trucks, vibrators, concrete mixers, frontend loaders, water carrying tankers, excavators, scaffolding and ledger pipes, and concrete pumps, with specific quantities required for different value ranges. The value of similar works completed should be indexed at the rate of 8% per year to bring it to the current price level. The bidder should have completed or substantially completed during the last five years civil works or similar nature of contract(s)/work(s) of the value as reflected in the given tables. The bidder should have achieved an average financial turnover on execution of Civil Engineering works during the last five financial years. The bidder should provide a list of projects completed, including project name, name of the employer, description of work, contract number, value of contract, date of issue of work order, stipulated period of completion, actual date of completion, and remarks explaining reasons for delay and work completed. The bidder should provide information on work performed as a nominated sub-contractor, including an authority letter regarding approval of the sub-contract by the competent authority. The bidder should provide a certificate issued by the client, supported by IT returns and TDS certificates. The bidder should demonstrate access to financial resources, including liquid assets, working capital, and credit facilities, with a requirement of not less than 10% of the value of the contract. The bidder should submit audited balance sheets for the last five years, demonstrating sound financial position and long-term profitability. The bidder should have a positive net worth, which shall be judged from the audited balance sheet of the latest financial year ending on a date not prior to the base year as stated in the SBD from the date of submission of the Tender/Bid. The bidder should provide reports on financial standing, including profit and loss statements, balance sheets, and auditor's reports for at least five years, supported by TDS and ITR. The bidder should provide evidence of access to financial resources
Costs
EMD
₹ 16,65,991Document Cost
₹ 4,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_LAHD_15679_1Tender No
E tender 15 of LDA LEh of 2024-25Tender Authority
Ladakh Autonomous Hill Development Council ViewPurchaser Address
-Website
http://tenders.ladakh.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dumping of stone including cost of stone
122.74
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
91.94
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
718.81
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.
327.29
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.
980.45
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.
560.2
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.
880.5
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Slab Edge Shuttering
450
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Stairs (excluding landings) except spiral staircases.
65.78
-
-
... More
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)
191.13
-
-
... More
Random rubble masonry with hard stone laid dry in foundation, plinth & walls. Laid with bond stone
8.96
-
-
... More
Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand)
35.41
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
95.86
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
346.54
-
-
... More
Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically Treated bars of grade Fe-500D or more
66360
-
-
... More
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6(1 cement :3coarse sand :6graded stone aggregate 20 mm nominal size)
598
-
-
... More
CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)Exterior
1154.6
-
-
... More
CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)Interior
2199.21
-
-
... More
6mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
858
-
-
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick (exterior)
1154.6
-
-
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
1154.6
-
-
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1 mm thick (interior)
3057.21
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
3057.21
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
34.53
-
-
... More
Providing and fixing 100mm Pine wood plain lining tongue and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface. 10mm thick
67.32
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
- Fixed to openings /wooden frames with rawl plugs screws etc.
750
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate
898
-
-
... More
20mm cement plaster finished with a floating coat of neat cement of mix : 1 : 3 ( 1 cement : 3 fine sand)
13.02
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and onforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Shade and pattern design as per the choice of Architect. Size of tile 600x600 mm
80.9
-
-
... More
Providing and fixing 12mm thick pre Laminated flooring of approved brand as per direction of engineer in charge, complete job AC-4 including carriage.
590.45
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
296.63
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm
and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to
be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24
mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with
1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass
fiber acoustical fleece.
634.17
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood
9.16
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
51.62
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood
34.42
-
-
... More
Float glass panes
9.7.7.1 4 mm thick glass pane (weight not less than 10kg/sqm).
87.94
-
-
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :
9.40.1 2nd class teak wood
9.40.1.1 50x12 mm
335
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
104
-
-
... More
Providing and fixing bright finished brass handles with screws etc. complete: 100 mm
128
-
-
... More
Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 250x10 mm
116
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of leverhandles of approved quality with necessary screws etc. complete.
26
-
-
... More
Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm
174
-
-
... More
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence
as detailed below:
1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.
2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.
3.On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/ grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.
4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in- Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
235
-
-
... More
Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with; Budloo wood
36
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour,
design & pattern.
256.2
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)
11.13
-
-
... More
SITC of Passenger Lift with power operated centre opening doors and AC Variables voltage and variable frequencycontrols.
Speed = 1 m/sec
Travel Height G+4
1
-
-
... More
Carriage of material by MT from source to site of work including loading, unloading complete job Cement & Steel ---------------130 km
311.4
-
-
... More
Carriage of material by MT from source to site of work including loading, unloading complete job Sand --------20 Km
384.31
-
-
... More
Carriage of material by MT from source to site of work including loading, unloading complete job Stone Aggregate
495.63
-
-
... More
Carriage of material by MT from source to site of work including loading, unloading complete job Stone -------20 Km
4055.8
-
-
... More
Electric work:-Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A
18
-
-
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A
10
-
-
... More
wiring of following light point with 1.5 sq.mm FRLS PVC insulated copper conductor cable in PVC conduit recessed including chasing of wall, filling of chases with cement mortar 1:3 mix and /or fixing conduit on surface of wall/ceiling including fixing of saddles etc. including modular range of plate switches, modular cover plate, ceiling rose, surface or deep tee, circuit wiring (2x2.5+1x2.5), 1.5 sq.mm FRLS PVC insulated copper earth wire, etc. complete as required. One point controlled by one number 10 Amp MCB (First point)
76
-
-
... More
wiring of following light point with 1.5 sq.mm FRLS PVC insulated copper conductor cable in PVC conduit recessed including chasing of wall, filling of chases with cement mortar 1:3 mix and /or fixing conduit on surface of wall/ceiling including fixing of saddles etc. including modular range of plate switches, modular cover plate, ceiling rose, surface or deep tee, circuit wiring (2x2.5+1x2.5), 1.5 sq.mm FRLS PVC insulated copper earth wire, etc. complete as required. Looping Point above
286
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
600
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
550
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.4 X 6 sq. mm + 2 X 6 sq. mm earth wire
250
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.4 X 16 sq. mm + 2 X 6 sq. mm earth wire
200
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm
500
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
4
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
44
-
-
... More
Supply & fixing of Universal Socket with 4.0 sq.mm PVC insulated multistranded copper conductor cable (FRLS Type) in surface / recess 1.8 mm thick PVC conduit including cutting the chases in wall & making good the same including providing & fixing of M.S. Switch & outlet box, modular range 13Amp switch with 3 pin 13Amp socket, modular cover plate, earthing with 4.0sq.mm PVC insulated copper conductor cable / wire (FRLS Type) etc. complete as required & as per specifications.
4
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 8 way (4 + 24), Double door
6
-
-
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door
3
-
-
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps
6
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
21
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"
curve, miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
71
-
-
... More
Supplying and fixing single pole blanking plate in the existing
MCB DB complete etc. as required.
73
-
-
... More
MAIN PANEL
Incoming: 1 no. of 160 Amp FP MCCB of 25KA breaking capacity.
Metering for incoming:
Digital Multifunction meter with RS-485 communication port for measurement of PF, V, A & Hz , equivalent to EM6459,with CT as required.
Phase indicating lamps RYB with 2 Amps SP MCB back up.
ON / OFF indicating lamps Bus Bars
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 200 Amps, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. Current density of Bus Bar to be 1.3 sq.mm / amp.
Outgoings 6 no. of 63 Amp 4P MCB of 16KA breaking capacity. +3
3 no. of 40 Amp DB MCB of 16KA breaking capacity.+2 GROUND FLOOR PANEL-1 as described above .
1
-
-
... More
SITC OF 12 W LED 6500 K Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver.MAKE :- Philips ,Havells or equivalent
90
-
-
... More
SITC of Track Light (Decorative Item to be confirmed by interior).MAKE :- Philips ,Havells or equivalent
264
-
-
... More
SITC of Step light (Decorative Item to be confirmed by interior) MAKE :- Philips ,Havells or equivalent
4
-
-
... More
SITC of 20W Led ceiling mounted MAKE :- Philips ,Havells or equivalent
18
-
-
... More
SITC of 8w bulk head light MAKE :- Philips ,Havells or equivalent
12
-
-
... More
SITC OF Hot and Cold AC Capacity : 1.5 Ton ISEER Rank / ISEER : Inverter 5 Star / 5.2 Cooling Capacity (Btu/h) : 17,100 / 8,550 (5,120 ~ 19,619) Power consumption (Cool) (W) : 1,270 / 431 (310 ~ 1,620) Heating Capacity (Btu/h) : 18,770 (4,400 ~ 22,520) Power consumption (Heating) (W) : 1,300 (260 ~ 1,800) Annual Power consumption (kWh) : 743.95 Make Daikin, Haier.All work complete
5
-
-
... More
Supply 2 MP IP DOME UP TO 30 MTR CAMERA :- 1/2.8” Progressive Scan CMOS Up to 2 megapixel resolution ,Full HD1080p real-time video ,120dB Wide Dynamic Range 3D DNR ,EXIR high performance LEDs Up to 30/50 meters IR range 12V DC*259o & PoE(802.3af Class3) Support H.264+ IP67
27
-
-
... More
Supply ,Installation, Testing , Commissioning, Integeration of 32- Channel 4K NVRs:- Third-party network cameras supported Up to 5 Megapixels resolution recording With 2 SATA Port up to 12 TB Supported Support 1-ch HDMI, 1-ch VGA, HMDI at up to 4K(3840x2160) resolution 4-ch network cameras can be connected with 40M/60M/80M incoming bandwidth Support dual- os to ensure high reliablility of system running Support various VCA detection alarm and VCA search Support H.265/H.264/MPEG4 video formats
1
-
-
... More
Supply ,Installation, Testing , Commissioning, Integeration of SURVl LLANCE HDD 4 TB
2
-
-
... More
Supply ,Installation, Testing , Commissioning Integeration of 16+2 Giga uplink Port POE Switch 10/100/1000 MBPS (GIGABYTE)
2
-
-
... More
Supplying, lnstallation,Testing & Commissioning of 32 " LfiD Full HD TV \
1
-
-
... More
HDMI Cable 10 MTR.
2
-
-
... More
Supply of 5 port LAN Switch 10/100/1000 MBPS (GIGABYTE}
1
-
-
... More
Supply, installation, testing & commissioning of 9U Network Rack with Hood and FAN For Field Devices, cable manager. The Rack box shall be provided with external earthing lugs 5 socket Power terminaton with MCB or More Proper/Steady fixing through RCC base as per site requirements is under bidder's scope.
2
-
-
... More
P& F of Rj-45 Connectors DLINK
30
-
-
... More
Supplying & Laying of CAT 6 Cable should be unshielded twisted pair cabling system, TIA / ELA 568-C.2 Category 6 Cabling system.Network support should be ultra high speed data networks such as Gigabit Ethernet (1000 Base-T and 1000 Base-TX) and beyond.Cable should be ETL Verified, UL Listed and UL channel verified- all three certificates are mandatory. Conductors type should be 23 AWG solid bare copper. frequency tested should be up to 600 MHz minimum. Impedance should be 100 + 15 Ohms. Propagation delay should be 535ns/100m @250MHz.cable should be RoHS compliant.The LAN Structured cabling should be of CAT 6 U/FTP. All user nodes should be on 1G networks with 20 years wa rranty certificate.
500
-
-
... More
Supply and laying of Heavy duty 25MM PVC Conduit along with all accessories
500
-
-
... More
Supply, installation, testing and commissioning of 3 KVA UPS with 30 minutes back-up with inbuilt battery complete etc as required. (APC/MICTOTEK/VGUARD)
1
-
-
... More
Supply Installation, Testing and Commissioning of EPABX System SIP Compliant. Wall/Rack Mountable,Expandable upto 128 Ports.and configured as for below Ports
P & T(CO Trunk) Line 02 Nos.
Digital Extension Circuit 04 Nos Analog Extension Circuit 05 Nos
Approved Make-NEC/Avaya/Alacatel
1
-
-
... More
Supply Installation, Testing and Commissioning of Operator Phone : INT Premium Deskphone Moon Grey, 4 grey level display, white backlight, Handsfree, Comfort handset, Magnetic alphabetic keyboard, Jack 3,5 mm 4 pole. Make: Avaya, Alcatel, Unify, Cisco
1
-
-
... More
Supply Installation Testing and Commissioning of Analogue phone with CLI & speaker. Make: Avaya, Alcatel, Beetel .
3
-
-
... More
Supplying & Fixing of Non- PCB based Information Outlet (I/O) RJ45, Termination TIA-568C Category-6, Termination of Catergory-6 UTP Cable, UL listed ,Shall conform to Category-6 as per the EIA/TIA-568C.2,Shall support network line speeds up to 1 Gbps, Shall have RJ-45 type connector with bend limiting and strain relief boot for securing IDC contacts from external forces and for maintaining the bend radius of the cable, Shall have minimum duraility of 950 or Above mating cycles and 200 termination cycles. Certified by independent labs like ETL/GHMT/3P for compliance to EIA/TIA-568C.2 complete in all respect.( For Data, EPBAX and CCTV) . Make- Legrand, Molex, Panduit.
1
-
-
... More
Supplying & Fixing of Double Faceplate dimension as per commercially available modular office furniture.Shall have spring shuttered front access for preventing ingress of dust,Shall be supplied with Gang Box of the same size by System Integrator complete in all respect. .Make- Legrand, Molex, Panduit.
3
-
-
... More
Supplying & Fixing of Floor Standing Network Rack - 9U /600d, with Heavy Duty Extruded. PDU 5/15Amps with MCB, Mounting Hardware (Pkt. Of 3) Cable manager 3Nos -1U with Loops complete in all respect. Make- Rittal, Valrack, APC.
1
-
-
... More
Supply Laying Testing and Commissioning of 10 Pair Solid Annealed Bare Copper, Armoured Jelly Filled Cables, Nominal Diameter of each strand No./mm 1/0.5, Solid polythene confirming to ASTMD-1248 Type-II or III, Class-A Cat. 4 or 5 (cl.4.0 of TEC GR/CUG-01/03 Aug.03), Screening- Material Polyal Tape ( as per Cl.No. 9.0), Thickness mm 0.3 +/- 15%,. Make- Delton, Finolex, Polycab.
200
-
-
... More
Supplying of 4-pair Unshielded twisted pair with a cross filler (+), meeting Category 6 standards as per TIA-568C.2, The cable should be tested till 250 MHz , Shall be Fire-Retardant, Low-Smoke & Zero-Halogen as per IEC 60332-1, IEC 61034-2 & IEC 60754-1 respectively.. conisidered for DATA, CCTV+ Voice) Make- Legrand, Molex, Panduit.
100
-
-
... More
Supply, Laying, testing and commissioning of 5 lines Floors MDF Box complete as required.
1
-
-
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system
with open protocol BACnet/ Modbus over IP complete as per specifications. Two Loop Panel
1
-
-
... More
Supplying, installation, testing & commissioning of intelligent analog addressable Heat detector complete with mounting base complete as required. (If the device does not have inbuilt isolator module then the bidder has to provide isolator module after every 15 devices within the cost of the detector and for this nothing extra shall be paid.)
1
-
-
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. (If the device does not have inbuilt isolator module then the bidder has to provide isolator module after every 15 devices within the cost of the detector and for this nothing extra shall be paid.)
85
-
-
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as requiredApproved by EN54/VDS/LPCB/UL.
5
-
-
... More
Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required
5
-
-
... More
Supplying & laying of 2 x 1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
500
-
-
... More
Supplying, installation, testing & commissioning of addressable fire control module complete as required.
5
-
-
... More
SITC of Digital 250 W (mini.) Class D, high efficiency amplifier shall be an EN54-16 compliant and certified system device in a 2 RU, 19”cabinet
. The amplifier shall be permanently monitored by the system controller.
A special standby mode shall be provided for saving energy during the time the amplifier is not is use with respect to all economical and supervision aspects.
• 480 Watt Class D amplifier
• 4 channel input on RJ45 connector, amp link in and out
(4 channel dynamic input channel switching for each amplifier
• Amplifier efficiency = 78%
• Limiter prevents audible distortion
Signal to noise ratio, A-weighted: 104 dB
1
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
24
-
-
... More
Supplying, unloading, installation testing and commissioning of following UPS /Inverter system for a constant secondary voltage 230/415 at 50 Hz, single phase/ three phase, with batteries backup including, SMF batteries with VRLA, battery chargers, rectifiers, transformers, controls,isolator for battery, protection and instruments etc. complete as required. Cost to include battery stand/rack, interconnecting cables etc.
RS 485 BACnet/Modbus protocol with each UPS for BMS Connectivity. All information to be provided to the BMS vendor at one point.
In-built Static Switch for Bypass & Inverter in each UPS module.
In-built Manual Maintenace Bypass for each UPS. Interconnecting copper cabling (DC cabling) between UPS, Battery breaker & Batteries of required length and size for each UPS.
Each UPS shall have web-enabled Monitoring and Management through SNMP protocols for Multi-OS environments. SNMP card should have 1 gigabyte speed and having cyber security certification in accordance with IEC 62443-4-2 and UL 2900-1 cybersecurity. Environmental Monitoring probe kit should also be offered to monitor environmental parameters such as temperature and humidity, measuring temperatures from 0°C to 70°C with an accuracy of ±2°C and relative humidity from 10% to 90% with an accuracy of ±5%, UPS OEM shall provide a monitoring software which should be able to command certain protective actions such as migration of virtual machines, controlled shutdown, or disaster recovery related actions. The software shall be compatible with third party information technology solutions connector of VMWARE & CITRIX, Microsoft, CISCO, Nutanix, Open stack etc
UPS Warranty - 3 years, Battery Warranty - 3 years Supply ,installation , testing and commissioning of 5 kVA Pure Sine Wave Inverter system for a constant secondary voltage of 220 volts at 50 Hz, single phase, batteries backup of minimum 90 Minutes back up duration including, batteries, battery chargers, rectifiers, transformers, controls, protection and instruments , trolley etc complete as required.
1
-
-
... More
Delivery, Loading/Unloading, Storage at site and Shifting at work place, Installation & Commissioning, HOD of above mentioned UPS & Batteries
1
-
-
... More
PLUMBING:- Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
3
-
-
... More
Providing and fixing counter top wash basin , 15 mm dia CP Brass single hole extended body basin mixer of approved quality and make, including cutting of Concrete Slab/Granite top and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
4
-
-
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of
Engineer-in-charge.
2
-
-
... More
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
1
-
-
... More
Providing and fixing C.P. Sink Mixer with Sewel Spout of approved quality conforming to IS:8931
1
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15 mm nominal bore
7
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
4
-
-
... More
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length
7
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
6
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
3
-
-
... More
Providing and fixing toilet paper holder : C.P Brass
3
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia
1
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
4
-
-
... More
Providing and fixing 100% stainless steel grating with frame of approved make and quality grade 304 on top of floor trap WITH COCKROACH JALI. The rate includes the cost of all ancillary works and material as required to complete the works.Make: CAMERY OR EQUIVALENT MAKE CHILLY 125 x 125 x 1mm Camery Cat : CCR-KFCH-125 MATTE
8
-
-
... More
Providing and fixing 100% stainless steel grating with frame of approved make and quality grade 304 on top of floor trap WITH COCKROACH JALI. The rate includes the cost of all ancillary works and material as required to complete the works.Make: CAMERY OR EQUIVALENT MAKE CHILLY 101x101 x1 mm Camery Cat : CCR-SFCH-101
3
-
-
... More
Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design complete including cost of cutting and making good the cut-outs in walls and floors etc. complete (P or S trap).110 mm inlet and 110 mm out let
8
-
-
... More
Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III)-IS:4985 inlet fitting approximately upto 300mm long above the trap with one or more 40 OD/ 50OD/63 OD/75OD holes for jointing waste pipes from waste appliances jointed and sealed with epoxy based sealant complete.
8
-
-
... More
Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B., Sink, floor drains etc. 40mm outer dia
10
-
-
... More
Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil & waste pipes). Nothing extra will be paid for supports.(Inside Toilets & Kitchen). 110 mm outer dia
81
-
-
... More
Providing and fixing floor drain (FD) with 75mm outlet and 100 mm inlet with PTMT grating having 19mm seal for indirect floor drain (FD).
3
-
-
... More
Providing and fixing uPVC CLEANOUT PLUG for cleaning . 110 mm outer dia
4
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams.
1
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
-
-
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.. Internal work -Concealed work,including cutting chases and making good the wall etc.
PN - 16 Pipe, 20mm OD (SDR-7.4)
21
-
-
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal work - Concealed work,including cutting chases and making good the wall etc.
PN - 16 Pipe, 25mm OD (SDR-7.4)
32
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm dia nominal bore
3
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm dia nominal bore
1
-
-
... More
Providing and fixing inslulation of pipes with self regulating heat tape wire of make Denfoss or Equivalent along with layer of foam insulation (50mm thick) of make K- Flex or equivaluent with protective outer layer, timer switch of make L&T, Havells or equivalent. All job complete
60
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2500
-
-
... More
Providing and fixing insulation of water tank with layer of glasswool (50mm thick) along with an outer covering of aluminium sheet, with all necessary fittings.
2500
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All Kind of Soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
20
-
-
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter
20
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe
20
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type With Solid Block
2
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With Solid Block
2
-
-
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With Solid Block
3
-
-
... More
Providing, fixing, testing, and commissioning of a hydropneumatic pumping system, consisting of two CI horizontal centrifugal pumps with SS impeller/shaft, 2900 RPM, 415V (±10%) at 50 Hz, AC 3-phase supply TEFC motor, with control panel, and the following specifications: Pump discharge: 2 x 110 LPM, operating head: 30 m, with required pressure tank. Pumps mounted on horizontal pressure tanks, complete skid-mounted unit with GI (heavy class) suction and delivery headers, including ball valves, NRV, etc., complete with MCC (factory assembled) in ready-to-use condition.
Make: Grundfos / Kirloskar / Wilo
Supply, installation, testing, and commissioning of starter panel of suitable rating TP MCB with fully automatic DOL starter for hydropneumatic pumps. Each starter feeder panel shall have a 10A TP MCB with 16 kA breaking capacity, along with 9A TP contactors and 2.5-4A overload relay as per Type-I coordination.
Hydropneumatic pump panel along with DOL starter panel.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements