Ladakh Autonomous Hill Development Council Tender
... More
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 49,37,386Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_LAHD_12402_1Bid Award Id
ViewTender No
E tender 22 of LDA Leh of 2023-24Tender Authority
Ladakh Autonomous Hill Development Council ViewPurchaser Address
-Website
http://https://leh.nic.in/lahdcleh/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Tourist Facilities at Sand dune Hunder Nubra and view point /parking space
Construction of Tourist Facilities at Sand dune Hunder Nubra and view point /parking space
BOQ Items
... More
Providing and fixing up to floor five level precast cement concrete solid blocks including hoisting and seating in position with cement mortar 1:3 (1: cement 3: coarse sand), cost of centering, Shuttering and complete. Crushed 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mmm nominal size)
330.94
-
-
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
4470.56
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
245.4
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
37.12
-
-
... More
R.C.C. work in walls (any thickness) including attached pilasters, buttress plinth and string course, fillets, columns, pillars, piers abutments post and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) nominal size.)
5.43
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size5.3.1
0.52
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete.
562.78
-
-
... More
Suspended floors, roofs, landings, balconies and access platform.
898.39
-
-
... More
Lintles, beams, plinth beams, girders, bressumers and cantilevers.
1225.6
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
775.33
-
-
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide.
295.17
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars Mild steel and Medium Tensile steel bars
89296.52
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works upto plinth level
446.21
-
-
... More
All works above plinth level upto floor V level
323.2
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
4690.92
-
-
... More
Stone work plain ashlar in super structure upto floor five level in cement mortar 1:3 ( 1 cement :3 coarse sand) including centering, shuttering and pointing with cement mortar 1:2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete: In Plain Ashlar One face desssed locally available granite stone.
746.95
-
-
... More
Providing and laying Local Dressed Granite Stone 150MM Thick paving on 20 mm thick bed of cement mortar 1:4( 1 cement : 4 coarse sand) .
1500
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):
2nd class kail wood
12.93
-
-
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood
92.28
-
-
... More
Providing and fixing double glazed units(DGU) comprising 6 mm thick glass on either side with 12 mm thick inert gas gaping The DGUs shall be processed from reputed glass processors.First class kail wood
272.21
-
-
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm
13
-
-
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm
13
-
-
... More
Providing and fixing factory made PVC door frames of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and jointed with two numbers of 150mm long brackets of 15x15mm MS square tube, the vertical door profiles to be reinforced with 19x19mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the frame. The door frame to be fixed to the wall using MS screws of 65/100mm size complete as per manufacturers’ specifications and directions of engineer-in-charge
69.35
-
-
... More
Providing and fixing 30 mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.Pre-laminated PVC door shutters
16.9
-
-
... More
Providing and fixing of traditional Ladakhi Shingstag of height 2 feet in 2nd class kail wood as per drawing complete in all respects (including polishing, cement concrete coping , fasteners which to be paid separately) including cost of transportation, labour, wood, wastage, taxes, profits etc as per directions of Engineer- in-charge
Back side window
42.07
-
-
... More
Providing and fixing wooden joist/ bali as rafter for roofing including placing, centering fixing between the wall hoisting, cutting, lifting & carriage complete job.
12.88
-
-
... More
Providing and fixing local taloo for roofing with mud phuska including fixing upon the bali hoisting, cutting, lifting & carriage completejob.
359.05
-
-
... More
Providing wood work in pargola and tie around the platform(sket-shing) fixed in position with necessary srews and fixtures including finishing and polishing as per direction of engineer in charged:
206.63
-
-
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works.
Camel shed.
3888
-
-
... More
Insulation of wall Providingand fixing (PU) Polyurethane 50mm thick of density 28kg -38 kg/ CU .M in between cavity wall.
971.85
-
-
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate.
898.39
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete..Size of tile 800x800 mm
124.85
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab
over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite
Brown, Cat Eye or equivalent.
1331.52
-
-
... More
Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete. Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm
898.39
-
-
... More
Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineerin- charge.
898.39
-
-
... More
15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand)
1241.19
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
1 : 6 ( 1 cement : 6 fine sand)
1241.19
-
-
... More
Two or more coats applied @ 1.25 liter/10sqm over and
including one coat of special primer applied @ 0.75liter /10sqm
1241.19
-
-
... More
Polishing on wood work with ready mixed wax polish of approved brand and manufacture:
door.
1040.92
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1 : 6 ( 1 cement : 6 fine sand)
1241.19
-
-
... More
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.
7144.73
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge)
193.65
-
-
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25
2760
-
-
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
920
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory
compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge.
80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
9200
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will beallowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
99.17
-
-
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.
1088.41
-
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of selfhealing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage.
254.85
-
-
... More
For horizontal surface one coat @1.10 kg per sqm.
47.17
-
-
... More
Grassing with selection no. 1 grass including watering and maintained of the lawn 30 days or more till the grass from a thick lawn from weeds and for moving including supply good earth.
412.38
-
-
... More
Providing and laying MS pipe 300 mm dia of 1.5m length and fixing charges at site with complete job inculing carriage .
6
-
-
... More
PHE WORKS:-Providing, laying and jointing uPVC Pipes (I.S:4985-2000) 6kgf/cm2 including jointing with solvent cement, testing, excavation, refilling and disposal of surplus earth wherever required complete in all respect. 110 mm diameter
5
-
-
... More
160 mm diameter
10
-
-
... More
200 mm diameter
85
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :100mm diameter
5
-
-
... More
150mm diameter
10
-
-
... More
200mm diameter
85
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:150 x 100mm size P-type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5
-
-
... More
Extra for depth for manholes :Size 90 x 80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
6
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kind of soil.
10
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
2
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kind of soil.Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
100
-
-
... More
Providing, fixing, testing and commissioning of FRP Cover with frame size 600 X 600mm (MD 10Tons(B125)). (For Grease Trap)
2
-
-
... More
SOIL WASTE, VENT & RAIN WATER PIPES AND FITTINGS :- Providing and fixing uPVC pipes (Type-B) confirming to IS 13592 : 1992 including all fittings e.g. plain or door bends, junctions, cowls, offsets, access pieces etc. jointing with solvent cement including cutting holes in walls, floors excavation, refilling and disposal of surplus earth wherever required and making good. (The cost of cutting holes of all sizes in RCC walls, slabs & beams wherever required including making good the same with sealents as required by the engineer-in-charge shall be included in the rate). a) 75 mm diameter
20
-
-
... More
110 mm diameter
285
-
-
... More
Providing, fixing, testing, & commissioning of Centrifugally Cast (spun) Iron Pipes (IS:3989) including all fittings such as bends, junctions, inspection doors, offsets, cowls, access pieces/plugs, brass floor cleanouts plugs etc. clamps/ structural steel supports as required/directed at site, jointing with dripseal joints including cutting holes in RCC/ Masonry walls and floors wherever required and making good the same. (The cost of cutting holes of all sizes in RCC walls, slabs & beams wherever required including making good the same with sealents as required by the engineer-in-charge shall be included in the rate).a) 100 mm dia
20
-
-
... More
150 mm dia
25
-
-
... More
Providing and laying uPVC Pipes confirming to IS 4985 : 2000) pressure 8kg/cm2 including jointing with solvent cement, testing excavation, refilling and disposal of surplus earth wherever required complete in all respect. Including making connection with floor trap with necessary fittings.40 mm nominal bore.
30
-
-
... More
50 mm nominal bore.
25
-
-
... More
Providing and fixing sand PVC trap (P trap) of self cleaning design as complete including cost of cutting and making good the cutouts in walls and floors etc. complete.110 mm inlet and 110 mm outlet
28
-
-
... More
Providing, fixing, testing and commissioning of sand cast iron, Trap (P Trap) of self cleaning design as per IS:3989 complete including cost of cutting and making good the cutouts in walls and floors etc. complete.100 mm inlet and 100 mm outlet
5
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
10.8
-
-
... More
Providing, fixing, testing and commissioning 110mm dia UPVC Inlet Fitting for making connection of UPVC waste pipes 32/50/80mm (NB) from washbasins and bath areas. The rates shall include making holes in inlet fittings and sealing the joints with M-seal/Silicon. The rates also include fixing of inlet fittings with CI trpas with drip seal and concreating al-around the trap and inlet fittings after fixing of waste pipes with cement concreate 1:2:4 mixed with water proofing compound.
28
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. (For rain water pipe)
15
-
-
... More
WATER SUPPLY :-Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.Internal Exposed on walls PN - 16 Pipe, 25mm OD (SDR-7.4)
185
-
-
... More
PN - 16 Pipe, 32mm OD (SDR-7.4)
120
-
-
... More
PN - 16 Pipe, 40mm OD (SDR-7.4)
60
-
-
... More
PN - 10 Pipe, 50mm OD (SDR-11)
60
-
-
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.PN - 16 Pipe, 25mm OD (SDR-7.4)
200
-
-
... More
PN - 16 Pipe, 32mm OD (SDR-7.4)
50
-
-
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.External work PN - 16 Pipe, 25 mm OD (SDR-7.4)
55
-
-
... More
PN - 16 Pipe, 32 mm OD (SDR-7.4)
25
-
-
... More
PN - 16 Pipe, 40 mm OD (SDR-7.4)
5
-
-
... More
PN - 10 Pipe, 75 mm OD (SDR-11)
210
-
-
... More
Providing and fixing PPR Unions PPR Union 25mm
10
-
-
... More
PPR Union 32mm
8
-
-
... More
PPR Union 40mm
5
-
-
... More
PPR Union 50mm
5
-
-
... More
Providing, fixing, testing and commissioning of high pressure Float Valves of PN-6 rating for Overhead water tanks.25 mm nominal bore
2
-
-
... More
32 mm nominal bore
1
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3000
-
-
... More
Providing, fixing, testing and commissioning of insulation on HDPE/RCC water tank with layer of class O closed cell Elastomeric Nitrile insulation sheets 15mm thick followed by insulation of 50 mm thick fiberglass insulation (density 48 Kg/cum) all around the tank. the fiber glass insulation shall be protected by 24 gauge aluminium sheet cladding giving proper overlaps & sealing the joints with suitable adhesive compound.
100
-
-
... More
Providing, fixing, testing & commissioning of lever operated gun metal ball valve with SS ball. 25mm nominal bore
12
-
-
... More
32mm nominal bore
1
-
-
... More
40mm nominal bore
7
-
-
... More
40mm nominal bore
3
-
-
... More
Providing, fixing, testing and commissioning of Air Release Valves screwed ends with ball valve of approved brand of manufacture, with accessories etc., complete.15mm dia
5
-
-
... More
Providing, fixing, testing & commissioning of class-O Careflex NBR insulation (Elastomeric foam) 13mm thick to hot water pipe and fittings and valves as per manufacturer's recommendations complete to satisfaction of Engineer in charge. 25mm nominal bore (19 mm thick insulation)
200
-
-
... More
32mm nominal bore (19 mm thick insulation)
50
-
-
... More
Providing, fixing, testing and commissioning of 50 mm thick fiberglass insulation (density 48 Kg/cum) 500 gm polythene sheet & 24 gauge aluminium sheet cladding giving proper overlaps & sealing the joints with suitable adhesive compound. 25mm nominal bore
185
-
-
... More
32mm nominal bore
120
-
-
... More
40mm nominal bore
60
-
-
... More
50mm nominal bore
60
-
-
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
8
-
-
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
2
-
-
... More
Providing & fixing M.S. Puddle Flange fabricated of 600 mm long 'C' class pipe pieces with screwed ends with center of pipe welded with 6mm thick M.S. plate of size (100mm+D) X (100mm+D) for R.C.C. water tank walls / slabs. The entire fitting shall be hot dipped galvanised. (D indicated above nominal dia metre of pipe in mm). (for Fire overhead tanks).25mm dia
2
-
-
... More
50mm dia
2
-
-
... More
65mm dia
1
-
-
... More
80mm dia
1
-
-
... More
100mm dia
3
-
-
... More
150mm dia
2
-
-
... More
Providing, fixing, testing and commissioning of 50mm dia G.I. Vent Pipe on Under ground and over head tank inlcuding cost of 2 Nos. 900 bend and painting with enamel paint complete with in all respect 50mm Dia) (for Fire overhead tanks).
4
-
-
... More
Providing, fixing, testing & commissioning of 450x600mm rectangular C.I. Cover (IS : 1726-91) with frame light duty total weight 38 kg. (23 kg. cover and 15 kg. Frame (for Fire overhead tanks).
4
-
-
... More
SANITARY FIXTURES:- Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
13
-
-
... More
Providing, fixing, testing & commissioning of vitreous China Sanitary fixtures and CP fitting and other accessaries for Handicapped Toilet (Matrix Set-1) Hindware Cat. No.-70002. Each Matrix Set shall comprised (Wash Basin 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm) complete all respect.
2
-
-
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
5
-
-
... More
Providing and fixing stainless steel A ISI : 304 (18/8) kitchen sink as per IS : 13983 with CI brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls where required.Kitchen sink with drain board 510 x 1040mm bowl depth 250mm
6
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 40 mm dia (for sink)
6
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
12
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.(For wash basin & sink)
18
-
-
... More
Providing and fixing CP Brass long body bib cock of approved quality confirming to IS standards and weighing not less than 690 gms.15 mm nominal bore
19
-
-
... More
Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 15 mm nominal bore
68
-
-
... More
Providing and fixing toilet paper holder.C.P. brass
15
-
-
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
13
-
-
... More
Providing, fixing, testing & commissioning of CP brass Sink Mixer with Swinging Spout (Table Mounted Model) with 450mm Long Braided Hoses equivalent to (JAQUAR Cat. No. CON-309KNM.
6
-
-
... More
Providing, fixing, testing & commissioning of C.P. brass twin robe hooks equivalent to JAQUAR Cat. No. 1161.
15
-
-
... More
Providing, fixing, testing & commissioning of S.S. hinged grating, 1.5mm thick with frame equivalent to JAYNA NEW HEAVY GRATINGS Cat. No. NHG 140 including setting in floor with cement mortar 1:3.
29
-
-
... More
Providing, fixing, testing & commissioning of automatic high pressure electric water heaters equivalent to VENUS with glass lining thermostats with each element and high temperature cut off, necessary insulation, safety valve, etc. all complete. 25 litres
2
-
-
... More
50 litres
2
-
-
... More
Providing, fixing, testing & commissioning of Health Faucet equivalent to JAQUAR Cat. No. ALD-573 make with flexible pipe and wall hook with each European W.C. Pan.
15
-
-
... More
Providing, fixing, testing & commissioning Soap Dispenser equivalent to (JAQUAR Cat No. ACN-1137N).
8
-
-
... More
Providing, fixing, testing and commissioning of white vitreous china Janitor Sink of 53x43x18 with CI brackets, 40mm CP brass waste with CP brass union, complete including cutting and making good the walls wherever required.
2
-
-
... More
Providing, fixing, testing & commissioning of 15mm C.P. brass Connection Pipe Jaquar Cat No. ALD-805B (450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for WC, Geysers & Basin Mixers)) or equivalent make union nuts complete with C.P. brass flange including cutting and making good the walls wherever required. (For Angle Valve)
68
-
-
... More
STORM WATER DRAINAGE SYSTEM:- Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe
60
-
-
... More
250 mm dia. R.C.C. pipe
170
-
-
... More
300 mm dia. R.C.C. pipe
15
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150mm diameter S.W. / RCC pipe
60
-
-
... More
250mm diameter S.W. / RCC pipe
170
-
-
... More
300mm diameter S.W. / RCC pipe
15
-
-
... More
Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm precast RCC horizontal grating with frame complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
22
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kind of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
245
-
-
... More
TUBEWELL AND TUBEWELL PUMPS (1 No.)- Drilling with ODEX rig in all kind of strata with 5" dia MS/ERW plain pipe of Jindal
or equivalent Make
90
-
-
... More
Lowering of MS Pipe & welding
1
-
-
... More
Development of tubewell with DTH rig heavy duty air compressor
1
-
-
... More
Providing, fixing, testing and commissioning of KSB make submersible pumping set with 3 HP with motor 23 stage pump. Three Phase Model : Cora
4C/23
1
-
-
... More
Providing, installation, testing & commissioning DOL Panel board for submerible pump
set
1
-
-
... More
Providing, fixing, testing and commissioning 1 1/2" GI Pipe
60
-
-
... More
Tubewell fittings like casing shoe,well
cap & welding of pipes
1
-
-
... More
Providing, laying, jointing, testing, & commissioning 4 Sqmm 3 core submersible cable
Aerolex make
100
-
-
... More
Lowering of submersible pumpset
1
-
-
... More
Transportation of equipment & team
1
-
-
... More
PUMPING SYSTEM:-Providing, fixing, testing and commissioning of monoblock vertical in line type pump set with SS casing, SS impeller and SS shaft complete with suitable motor and cement concrete foundation. Motor to be suitable for 400/440 volts, 3 phase 2900 RPM.Filter Feed pumps Pump capacity - 50 lpm Head - 20 m RPM - 2900
2
-
-
... More
Domestic water transfer pumps Pump capacity - 100 lpm Head - 40 m RPM - 2900
2
-
-
... More
Providing, fixing, testing and commissioning non clog type mono block submersible drainage pumps with CI casing & CI impeller suitable for handling solids of 12 mm size Capacity 300 lpm & Head 10m (Pump room)
2
-
-
... More
Providing, fixing, testing and commissioning of liquid level controller cum indicater comprising single SS 304 Probe stem of suitable length based on the height of the tank. The probe shall have 5 nos Magnetic Bi-stable sensors with 0-5000 ohms resistance to act as potentiometer. The Sensors to be actuated by a single actuating float to give analog output based on level at any stage. Float shall be provided with 4 Digit Red LED 7 segment display of 12.5 mm, to be connected with the Probe unit. The unit shall have High and Low alarm to be set according to requirement based on levels indicated. For Domestic Filter feed pumps To start domestic filter feed pumps at low water level in domestic treated under ground tank and stop at high water level in domestic treated tank and stop at low water level in domestic raw water tank.
1
-
-
... More
For Domestic Treated water supply pumps:- To start pump at low water level in overhead tank and stop at high water level in overhead tank and low water level in under ground tank.
1
-
-
... More
Providing, fixing, testing and commissioning of dust, damp and vermin proof, free floor standing factory built sheet steel enclosed nondrawout modular panel for pumps, fabricated out of suitable sized square tubular section and covered with 2mm thick CRCA sheet, hinged doors and partitions all 2mm thick , duly painted complete with earth bus, necessary metering protections & indications and mounted with the following including all inter connection etc. (Including earthing).(Pumps in pumproon and at site) a) One No.63 amps TP incoming MCB complete with the following: i) 1 No. 0-500 volts 96x96 sq. mm ammeter with selector switch and fuses. (1 set). ii) 1 No. 0-100 amps 96x96sq.mm ammeter with 100/5 amps ratio CT's and selector switch .iii)Over voltage and under voltage tripping machanism for persistent voltage fluctations of more than ±10% of the rated voltage for more than 5 minutes. (1set )iv)Phase indicating lamps with toggle switches. v)Indication lamps for ON/OFF/TRIP status of motors. b) Aluminium bus bar of 100 amps for three phase and neutral. c) Outgoing Feeders/Starters. i) 16 amps TPN MCB with DOL starter each suitable 1.5 HP filter feed pumps (2 Nos). ii)16 amps TPN MCB with DOL starter each suitable for 2 HP for domestic water supply (2 Nos). iii) 16 amps TPN MCB each suitable for 2 HP drainage pumps panel in pump room (1 Set) iv) .10 amps TPN MCB with selector swiitch for 60 Watt metering pump v)32 amps TPN MCB each suitable for 5 HP tubewell pumps panel (1 Set). vi) Rotary manual/auto/off switch. (4 Nos.) vii) spares a)16 amps TPN MCB - 2 Nos. b) 32 amps TPN MCB - 2 Nos. Note :All switch gear/panels shall be suitable for 10 KA rating. All outgoing will have 96 sq. mm size ammeter and CT. All starter will have spare 10 amps 230 V coil auxiliary contractor for building Automation system. All starter units for pumps to be provided with 3 level liquid level contractor. Lamps All pumps to be provided with duty selector switch. All pumps to be provided with sequence timer 220/440 V AC/DC and alternate working of pumps between 6 to 8 hours or alternate use of pumps after one service in sequence. All starter to be provided with single phase preventor. Necessary cable alleys for space switches, level controller internal wiring and copper earthing of all equipment shall also be included. All switch gears/control gears shall be motor duty rating.
1
-
-
... More
Providing, fixing, testing and commissioning of dust, damp and vermin proof, wall mounted modular panel for drainage pumps, fabricated with 2 mm thick CRCA sheet, hinged doors of 2 mm thick CRCA sheet, duly painted complete with necessary metering protections & indications and mounted with the following including all inter connection etc. (Including earthing). (For starter panels of drainage pumps in pumproom ) a) 16 amps incoming MCB (1 No.) b) Panel type volt meter 96mm square with Rotary selection switch for reading voltage between phase and neutral or incoming feeder. (1 set) c) Phase indicating lights with toggle switches and shall be protected by 2 amps MCB's. (2 sets) d) Ampere meter 96mm square panel type of appropriate range. (1 set) 16 amps outgoing DP MCB (2 Nos.) f) Fully automatic DOL starters with push buttons indicating lights and overload relay each for drainage pump. (2 Nos.) g) Single phasing preventors. (2 Nos.) h)Rotary manual/auto/off switch. (2 Nos.) i)Space of one liquid level controller
1
-
-
... More
Providing, laying, jointing, testing, & commissioning the PVC insulated & sheathed FRLS (Flame Retardant Low Smoke) Armoured Cables of 1.1 K.V. Aluminium Conductor including supplying and making end termination with brass compression glands: 3 Core x 2.5 sq.mm
100
-
-
... More
4 Core x 2.5 sq.mm
50
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150mm width x 50mm depth x 1.6 mm thickness.
30
-
-
... More
WATER TREATMENT SYSTEM:- Providing, fixing, testing and commissioning skid mounted FRP Dual Media pressure filter complete with initial charge of filter media, face piping and valves accessories, testing and commissioning complete. For Domestic water supply Capacity 3000 lph. Working pressure 2.5 kg./cm2 Flow velocity: 10m3/hr/m2 Design pressure 4 kg./cm2
1
-
-
... More
Providing, fixing, testing and commissioning skid mounted FRP Activated carbon filter complete with initial charge of filter media, face piping and valves accessories, testing and commissioning complete. For Domestic water supply Capacity 3000 lph. Working pressure 2.5 kg./cm2 Flow velocity: 10m3/hr/m2 Design pressure 4 kg./cm2
1
-
-
... More
Providing, fixing, testing and commissioning bulk water meter with direct reading dial in KL, all internal parts and strainer in gun metal/brass .32 mm dia for 3000 lph rate of flow for filter.
1
-
-
... More
Providing, fixing, testing and commissioning direct reading rate of flow Rota Meter 32 mm dia for 3000 lph rate of flow for filter.
1
-
-
... More
Providing and fixing in position the industrial type Pressure Gauges with gun metal / brass valves complete as required
2
-
-
... More
Providing, fixing, testing and commissioning of chlorinator with metering pump mounted on HDPE white tank suitable for operation on 220 ± 5% single phase, 50 Hz AC supply, including cables from metering pump to control panel compete in all respects.
1
-
-
... More
SUCTION AND DELIVERY PIPES AND VALVES FOR WATER SUPPLY PUMPS:- Providing, fixing, testing and commissioning G.I. suction & delivery headers / pipes for water supply pumps (IS:1239 heavy class) jointed with G.I. heavy class welded flanged fittings (bends, tees, reducers, plugs, flange & blank flanges etc) and clamps all complete. Note: All pipes & fittings in pump room will be weldeded flanged types. 32 mm nominal bore
30
-
-
... More
40 mm nominal bore
10
-
-
... More
50 mm nominal bore
30
-
-
... More
65 mm nominal bore
10
-
-
... More
80 mm nominal bore
20
-
-
... More
Painting for G.I. Pipes with two or more coats of synthetic enamel paint of approved quality and shade over a coat of approved primer coat as directed including surface preparation (Shade as per pipe colour code). 32 mm nominal bore
30
-
-
... More
40 mm nominal bore
10
-
-
... More
50 mm nominal bore
30
-
-
... More
65 mm nominal bore
10
-
-
... More
80 mm nominal bore
20
-
-
... More
Providing, fixing, testing and commissioning lever operated gun metal Ball Valve with SS ball. 32 mm dia
14
-
-
... More
40 mm dia
2
-
-
... More
50 mm dia
3
-
-
... More
65 mm dia
2
-
-
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 32 mm nominal bore Horizontal
2
-
-
... More
50 mm nominal bore Horizontal
2
-
-
... More
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified 80mm dia
3
-
-
... More
NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.80mm dia
2
-
-
... More
Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified 40mm dia.
2
-
-
... More
65mm dia
2
-
-
... More
SEWAGE TREATMENT PLANT OF CAPACITY 20 KLD:- Supply, erection, testing and commissioning of sewage treatment plant based on attached growth aerobic moving bed bio reactor technology for the following: Daily Avg. Sewage : 20m3/day PH : 6.5 - 8.5 BOD 5 : 350 mg/l S. Solids : 250 mg/l COD : 450 mg/l Coliform : 10^6 - 10^7 counts / 100 ml N-Total = 50 ppm Phosphorus=10 ppm Effluent discharge standard after treatment: Conforming to requirement approved standards PH : 6.5 - 7.5 BOD 5 : 10 PPM S. Solids : 20 mg/l COD : 50 PPM Oil & grease : 10 mg/l NH4-N : 5 PPM N-Total : 10 PPM Coliform : 100 counts / 100 ml Sewage treatment plant shall include supply erection, testing & commissioning of the following items:Supply, installation, testing & commissioning of Stainless Steel 304 Coarse Screen (3mm thick sheet) with suitable lifting arrangement (size 600 mm wide x 1000 mm high approx). Hole size 10mm.
2
-
-
... More
Supply, installation, testing & commissioning of SS-316 (Schedule 40) puddle flanges in accordance to BS:10 table D as required to be provided (in the structural slab and wall) of various diameters. Puddle flanges shall be provided for all the structural component of the STP. The installation of the puddle flanges shall be carried out by the Civil contractor in accordance to the Civil GA drawing (to be prepared by the STP contractor) at the required levels & position; under the supervision of the STP contractor.
1
-
-
... More
Supply, installation, testing & commissioning of electronic type level switches for automatic operation of the system with high/low level alarm complete with auxillary NO/NC contacts for (To be provided for all the tanks and plant room sump)
1
-
-
... More
Supply, installation, testing & commissioning of sight tube (of 3.5 to 4.5 m length) with isolation valve at top/bottom, demarcation on tube & for making the installation complete for treated water tanks.
3
-
-
... More
Sewage pumps: Centrifugal type, non clog self priming pumps complete with valves, suction and delivery header of an approved make of suitable capacity capable of handling minimum 7 mm to 10 mm size solids for untreated effluent with fan cooled induction motor with class 'B' insulation, mounted on a common structural base plate, suitable vibration eliminated pads of approved design for pump foundation, motor to be suitable for 400/440 volts, 3 phase, 50 cycles AC supply with rpm, to suit the corresponding pumps. Capacity 1.0m3/hr at 12m head (For sewage lifting from equalisation sump)
2
-
-
... More
Submersible drainage pumps: Providing, fixing and commissioning non clog type CI mono block submersible drainage pumps suitable for handling solids of 12 mm size with totally water and dust proof motor.Capacity 12.0m3/hr at 12m head (For drainage lifting from drainage sump)
2
-
-
... More
Sludge pumps: Centrifugal type, non clog self priming pumps complete with valves, suction and delivery header and priming tank of an approved make of suitable capacity capable of handling minimum 7mm to 10mm solids size for untreated effluent with fan cooled induction motor with class 'B' insulation, mounted on a common structural base plate, suitable vibration eliminated pads of approved design for pump foundation, motor to be suitable for 400/440 volts, 3 phase, 50 cycles AC supply with rpm, to suit the corresponding pumps. Capacity 1.0m3/hr at 12m head (For transfer of sludge)
2
-
-
... More
Capacity 4.0m3/hr at 12m head (For recirculation of sludge from MBBR-2 tank to Anoxic Tank)
2
-
-
... More
Pre Fabricated Package type sewage treatment plant in MSEP comprising of the following: a) MBBR tank in MSEP. (Size as per drawing)- 2 Nos. b) Tube Settler in MSEPcomplete with desludge valve and media as required. (Size as per drawing)-1 No. c)Filter feed tank in MSEP. (Size as per drawing)-1 No. d) Treated water tank in MSEP. (Size as per drawing)-1 No. e)UF water tank in MSEP. (Size as per drawing)-1 No. f) Irrigation water tank in MSEP. (Size as per drawing)-1 No. g) Sludge holding tank in MSEP. (Size as per drawing)- 1 No. h) Anoxic tank in MSEP. (Size as per drawing)- 1 No.
1
-
-
... More
Providing, fixing, testing and commissioning of submersible mixer for Anoxic Tank with all accessories, motor of required capacity. Suitable for 415 ± 10% volts, 3 phase, 50 cycles A/C supply.
1
-
-
... More
Air Blowers: Twin lobe positive displacement type, rotary air blowers of suitable type with V-belt drive, belt guard, base plate, inlet filter-silencer, flexible connectors, check valve, relief valve, pressure gauge and piping.Capacity- 32m3/hr @ 5000 MMWG at 1500 RPM-2 Nos. (1w+1s)
2
-
-
... More
Non-Clogging, freely moving PP media for MBBR reactors
2
-
-
... More
The MBBR tanks equipped with non clog Air Grids for 20m3/day sewage flow to supply sufficient air for the treatment process and maintain adequate circulation velocity to prevent solids from settling.No. of Diffusers : (Fine buble) 7 Nos. to be distribution in MBBR tanks, equilization tank & sludge holding tank. (Shop drawings will be required indicating no. of diffusers & pipe work in each tank)Non submerged air piping : MS 'C' Class pipe as per IS:1239/IS:3589.Submerged Air Piping : SS-304 (Schedule 40)
1
-
-
... More
Media for tube settler as per design requirement.
1
-
-
... More
Providing, fixing, testing & commissioning of Basket Centrifuge, top discharge type for sludge dewatering of basket size 450mm dia x 200mm depth.
1
-
-
... More
Providing, fixing, testing & commissioning of Centrifuge Feed Pumps: Centrifugal type, non clog self priming pumps complete with valves, suction and delivery header of an approved make of suitable capacity capable of handling 8-10 mm size solids for untreated effluent mounted on a base plate, suitable vibration eliminated pads of approved design for pump foundation, motor to be suitable for 400/440 volts, 3 phase, 50 cycles AC supply with rpm, to suit the corresponding pumps. Capacity 1.5m3/hr at 15m head
2
-
-
... More
Supply, installation, testing & commissioning of U.V. sterlizer suitable for treated effluent from STP with S.S. housing. U.V. lamp, glass tube and all other accessories as per manufacturer's specification with cleaning arrangement, supports, inlets, outlet bypass connections & U.V. monitor including S.S. cabinet with glass door of suitable size to house the U.V. sterilizer. The entire assembly shall be mounted on wall.Capacity : 1.25m3/hr
1
-
-
... More
Supply, installation, testing and commissioning of metering pump suitable for operation on 220 ± 5% single phase, 50 Hz AC supply, mounted on 200 litres triple layer HDPE white tank on mounting platform fabricated above tank with Agitators with each tank complete in all respects.Capacity 0-6 lph (For poly dosing for basket centrifuge & chlorine dosing for STP (1W+1S) with each set of pump. Rate shall be for one set of 2 pumps.
2
-
-
... More
Providing, fixing, testing and commissioning of vertical floor mounted FRP filter of suitable size, provided with an inlet distributor. The vessel material of composite FRP with PVC frontal piping ,inter connection, manual MPV & filter media. complete with standard fittings like pressure gauge at inlet & outlet, sampling cock, air vent valve with piping, bolts, nuts & rubber gaskets. Capacity : 1.25m3/hr Flow velocity: 10m3/hr/m2 Working pressure : 2.5kg/cm2 Design pressure: 4 kg./cm2
1
-
-
... More
Providing, fixing, testing and commissioning of vertical floor mounted FRP activated carbon filter of suitable size, provided with an inlet distributor. The vessel material of composite FRP with PVC frontal piping ,inter connection, manual MPV & filter media. complete with standard fittings like pressure gauge at inlet & outlet, sampling cock, air vent valve with piping, bolts, nuts & rubber gaskets. Capacity : 1.25m3/hr Flow velocity: 10m3/hr/m2 Working pressure : 2.5kg/cm2 Design pressure: 4 kg./cm2
1
-
-
... More
Filter Feed pumps: Centrifugal type, monobloc, self priming pumps with CI Casing, SS impeller & SS shaft of an approved make and complete with with suction and delivery valves and non return valves,suction and delivery headers capable of handling clear water complete with fan cooled induction motor with class B insulation, mounted on a common structural base plate with 100mm dia pressure gauge with gunmetal isolation cock and suitable vibration elimination pads of approved design for pump foundation. Motor to be suitable for 400/440 volts, 3 phase, 50 cycle AC supply with rpm, to suit the corresponding pumps. Capacity 1.25m3/hr at 25m head.
2
-
-
... More
Providing, fixing, testing and commissioning of monoblock vertical in line type pump set with SS casing, SS impeller and SS shaft complete with suitable motor and cement concrete foundation. Motor to be suitable for 400/440 volts, 3 phase 2900 RPM. Irrigation water transfer pumps Pump capacity - 100 lpm Head - 40 m RPM - 2900
2
-
-
... More
Pipe lines and valves: For interconnecting pipes of pumps & equipments. CPVC pipes (SDR 11 grade ASTM D-2846) for pipes uto 50 mm NB & for 65 NB & above (SCH-40 ASTM F-441) MS 'C' class pipes as per IS:1239/IS:3589 for exposed air lines.SS-304 (Schedule 40) pipes for submerged air lines.
1
-
-
... More
Supply, erection, testing and commissioning of megnatic flow meter with totalizer. a) 20 mm dia at outlet of ultrafiltration plant & outlet of sewage lifting pumps.
2
-
-
... More
20 mm dia at outlet of filter feed pumps.
1
-
-
... More
Supply, erection, testing and commissioning of air Rota meter. 40 mm dia
4
-
-
... More
Supply, erection, testing and commissioning of Energy meter before electrical panel.
1
-
-
... More
Providing pH meter.
1
-
-
... More
UF PLANT :- Providing, fixing, testing & commissioning of UF plant of capacity 1.25 cum/hr complete with all interconnecting pipes and valves with all the required accessories & chemical cleaning system, complete in all respects & comprising the following :a) UF Module (Hollow Fibre-outside in type porocity 0.1 to 0.01 micron) including micron cartridge filter in PP housing, Pneumatic Valve, PLC Electrical Panel, flow meter, compressor and all other accessories making the system complete. Flow rate : 1.25m3/hr Output Inlet TSS :- 10-30 mg/lt Filtration Flux :- 40 lt/m2/hr Membrane Area - 55-75 M2 as per approved makes Membrane MOC - PVDF Membrane Type :- Pressure Feed Mambrane 25 micron cartridge type, Out to in process No. of UF Membrane - 1 Lot (As per manufacturer design. No. of mebrane & capacity of each membrane & feasibility of space inside STP plant room to be indicated by Vendor at this stage before award of work b) UF Feed Pump 2 Nos. (1W+S) 1.25m3/hr each 20-25m head. c) UF pre fine filtration d) UF Backwash pumps with Complete SS - 304 with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, strainer at suction etc. (Cap. 2.50m3/hr head 18-20m (1 W+ 1S) Including HDPE back tank of capacity 500 litres. e) Chlorine dosing system f) CEB / CIP dosing station including dosing tank & pumps etc .g) PLC control panel with all automation required like Pneumatic valves, piping in UPVC PLC and other required accessories.
1
-
-
... More
Supply, installation, testing and commissioning of dust, damp and vermin proof, free floor standing factory built sheet steel enclosed nondrawout modular panel for water supply pumps, fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with earth bus, necessary metering protections & indications and mounted with the following including all inter connection etc. (Including earthing). a) One No. 63 amps TP incoming MCCB complete with the following: i) 1 No. 0-500 volts 96x96 sq. mm ammeter with selector switch and fuses. ii) 1 No. 0-100 amps 96x96sq.mm ammeter with CT's and selector switch. iii) Over voltage and under voltage tripping machanism for persistent voltage fluctations of more than ±10% of the rated voltage for more than 5 minutes. iv)Phase indicating lamps with toggle switches. v)Indication lamps for ON/OFF/TRIP status of motors b).Aluminium bus bar of 100 amps for three phase and neutral. c)Out going feeders/Starters i) 2 Nos. 10 amps TP MCB with DOL starter for sewage lifting pumps ( 0.5 HP) ii) 2 Nos. 10 amps TP MCB with DOL starter for sludge transfer pumps ( 0.5 HP) iii) 2 Nos. 10 amps TP MCBS with DOL starter for re-circulation pumps for anoxic tank (1 HP) iv)2 Nos. 32 amps TP MCB DOL starter for air blowers (1.5 HP) v)2 Nos. 10 amps TP MCBS DOL starter for filter feed pumps. (0.5 HP) vi) 2 Nos. 10 amps TP MCB DOL starter for centrifuge feed pump. (0.5 HP) vii)2 Nos. 6 amps DP MCB with Dol starter each suitable for 0.5 to 1 HP motor for metering pumps. viii)1 No. 10 amps TP MCB DOL starter starter submesrible mixers. (0.5 HP) ix) 1 No. 16 amps TPN MCB for hydro-pneumatic system for irrigation water supply pumps panel (2.0 HP) x) 1 Nos. 32 amps TPN MCB with built-in SPP each suitable for (2 nos. pumps x 2HP) 4HP drainage pumps panel (1 Set). xi)1 Nos. 16 amps TPN MCB with built-in SPP each suitable for 2 HP UF panel (1 Set). xii) Rotary manual/auto/off switch. (4 Nos.) xiii)Sapre MCBS a) 10 Amp (2 Nos.) b) 16 Amp (2 Nos.) c) 32 Amp (2 Nos.) a)All switch gear/panels shall be suitable for 25 KA rating. b) All outgoing will have 96 sq. mm size ammeter and CT. c)All starter units for pumps to be provided with 3 level liquid level contractor. d)All outgoing starter units to have "ON" red lamps. e) All pumps to be provided with duty selector switch. f) All pumps to be provided with sequence timer 220 / 440 V AC / DC and alternate working of pumps between 6 to 8 hours or alternate use of pumps after one service in sequence. g) All pumps to be provided with over load relay. h)Arrangement for phase reversal to be provided in panel. i)Necessary cable alleys for space switches, level controller internal wiring and copper earthing of all equipment shall also be included. All switch gears/control gears shall be motor duty rating.
1
-
-
... More
Supplying and laying the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium Conductor including supplying and making and termination with brass compression glands: a) 3 Core x 2.5 Sq.mm
75
-
-
... More
b) 3 Core x 4 Sq.mm
40
-
-
... More
c) 4 Core x 2.5 Sq.mm
15
-
-
... More
d) 4 Core x 4 Sq.mm
20
-
-
... More
e) 4 Core x 6 Sq.mm
20
-
-
... More
Supplying and installation following size of perforated pre painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joint with horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders etc. as required. a) 150mm width x 50mm depth x 1.6mm thickness
40
-
-
... More
b) 300mm width x 50mm depth x 1.6mm thickness
25
-
-
... More
Approval: Contractor to provide adequacy report consisting of inlet and outlet test reports, report/drawings as per pollution board requirement. Contractor shall include the cost of all chemicals consumed during testing and commissioning and the cost of such items of works, which are not explicitly mentioned above. All required statuary approvals shall be included in the rates.
1
-
-
... More
Opertaion & Maintenance contract of STP for a period of one year after completion of one year defect liability period after commissioning. All spares and replacement of any defective part shall be included in the contract.
1
-
-
... More
FIRE FIGHTING PUMPS & EQUIPMENTS:- Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325 c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required d) Suitable cement concrete foundation duly plastered and with anti vibration pads. e) 450 lpm at 35 m Head
1
-
-
... More
Providing, fixing, testing and commissioning of dust, damp and vermin proof, wall mounted factory built sheet steel enclosed nondrawout modular panel for fire booster pumps, fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with earth bus, necessary metering protections & indications and mounted with the following including all inter connection etc (for Fire Booste pump). a) 32A TP MCB with DOL starter, overload relay, start/stop push buttons, ammeter (0-40A) with three CT & selector switch, on/off/trip indication lights with protection fuse, single phase preventer. - 01 Set b) One panel type volt meter 96mm square with Rotary selection switch for reading voltage between phase and neutral or incoming feeder. c) One Ampere meter 96mm square panel type of appropriate range d) Etched plastic identification plates for all switch gears. e) Space for 32 ampere MCB. f) All internal wiring should be colour coded from incoming main to switchgear, starters, meters, indicating lights. g)Single phasing preventors. (1 No.) h) Rotary manual/auto/off switch. (1 No.)
1
-
-
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
1
-
-
... More
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
1
-
-
... More
Providing, laying, jointing, testing, & commissioning the PVC insulated & sheathed FRLS Armoured cables of 1.1 K.V. Aluminium Conductor including supplying and making end termination with brass compression glands: a) 3 core x 10 sq.mm
10
-
-
... More
FIRE HYDRANT SYSTEM & FIRE EXTINGUISHERSProviding laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. a)100 mm dia pipe
20
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : a) 25 mm dia pipe
5
-
-
... More
80 mm dia pipe
5
-
-
... More
100 mm dia pipe
75
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :a) Single headed Gunmetal
4
-
-
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal
4
-
-
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. a) 30 m
2
-
-
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : a) Gun metal
2
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : a) 80 mm dia
3
-
-
... More
b) 100 mm dia
2
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : a) 100 mm dia
2
-
-
... More
Providing, fixing, testing & commissioning of Drainage Provision for the risers with necessary 40 mm dia pipe, ball valve etc as required. Maximum length of pipe shall be 10 M.
2
-
-
... More
Providing, fixing, testing & commissioning of 25 mm dia screwed inlet forged brass single acting air valves connected with ball valve on inlet side at top of the Risers.
2
-
-
... More
Providing and fixing in position the industrial type Pressure Gauges with gun metal / brass valves complete as required
2
-
-
... More
Providing, fixing, testing & commissioning of door with frame for all internal fire hydrants fabricated from 18 gauge CRCA M.S. sheet double door including 2 nos allen key lock for locking along with padlock arrangement & fully glazed with 5 mm thick float glass approved by local Fire Authority, stove enameled fire red finish with " fire hose' written on front with radium strip suitable to house 15 mm long four length of canvas hose with couplings, one no of branch pipe, one fire mans axe and two numbers of portable extinguishers, first aid fire hose and supports for hoses, branch pipes, Axe and hose reel. as per approved design including necessary fixing arrangement for hoses & axe and branch pipe.).
4
-
-
... More
Providing, fixing, testing & commissioning of standard Fireman's Axe with heavy insulated rubber handle.
2
-
-
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
2
-
-
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : a) 2 way-100 mm dia M.S. Pipe
1
-
-
... More
Providing, installation, testing and commissioning of ABC type fire extinguishers consisting of welded MS cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to ISI finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Capacity 6 kg. I.S.I. Marked.
7
-
-
... More
Providing, installation, testing and commissioning of Carbon-di-oxide fire extinguishers consisting of welded M.S cylinderical body,squeeze lever discharge valve fitted with internal dischargetube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 934 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. a) Capacity 4.5 kg. I.S.I. Marked.
1
-
-
... More
Electrical works:- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group b
8
-
-
... More
Group C
57
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface /recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
378
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
430
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
150
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
174
-
-
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
30
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
100
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm
15
-
-
... More
3 x 2.5 sq. mm
30
-
-
... More
3 x 4 sq. mm
30
-
-
... More
3 x 6 sq. mm
147
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
100
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
15
-
-
... More
25 mm
15
-
-
... More
40 mm
100
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch
4
-
-
... More
3 pin 5/6 A socket outlet
4
-
-
... More
TV antenna socket outlet
2
-
-
... More
Bell push
4
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75mmX75mm)
6
-
-
... More
6 Module (200mmX75mm)
2
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
24
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
12
-
-
... More
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
152
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
4
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep
7
-
-
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
7
-
-
... More
Wiring for group controlled (looped) light point/fan
point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group b
22
-
-
... More
Group C
123
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
2
-
-
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
3
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without
MCB/RCCB/Isolator) 8 way (4 + 24), Double door
4
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
96
-
-
... More
Double pole
12
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
10
-
-
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A
4
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as
required. 63 A
12
-
-
... More
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
20
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
4
-
-
... More
Supplying and installing following size of perforated Hot
Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm width X 50 mm depth X 1.6 mm thickness
5
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
5
-
-
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness
2
-
-
... More
150 mm width X 50 mm depth X 1.6 mm thickness
1
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
40
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
40
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
120
-
-
... More
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL):- Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.
4
-
-
... More
Supplying, installation, testing & commissioning of smoke
detector with builtin LED and mounting base complete with all connections etc. as required.
33
-
-
... More
Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
2
-
-
... More
Supplying, installation, testing & commissioning fire alarm
sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
2
-
-
... More
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 4 Zone
1
-
-
... More
Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet
to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and
public address system, monitoring system including connections, interconnections etc complete as required. 10 Zone panel for fire alarm system 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required - 2 Nos.(one to act as standby) Talk back master station with LED PTT (press to talk) push
button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 set. Amplifier change over switch for inter changing amplifier -1 No. Monitor panel for loudspeaker complete with output
selector, ON/OFF switch, fuse, visual indications etc.
complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch- 1 No. Main ON/OFF switch, fuse indication lamps, DC and AC
voltmeters & ammeters, terminal blocks etc. complete as
required -1 set. Battery charger trickle cum boost to take complete load of
fire alarm & PA system complete with all accessories
including providing & fixing of 2 nos.12 volt, 60 AH each
sealed maintenance free batteries -1 set.
1
-
-
... More
Cable and wiring:-Supplying & laying of 2x1.5 sqmm fire survival armoured
cable, 600/1000V rated with annealed copper conductor
having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
615
-
-
... More
PUBLIC ADDRESS SYSTEM:- Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required
1
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.
22
-
-
... More
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
5
-
-
... More
CABLING & WIRING:- Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
450
-
-
... More
Supplying and fixing 25 mm dia MS flexible pipe with PVC
coating along with all ancillaries and accessories like coupler etc. as required.
50
-
-
... More
D.G SETS:- Supplying, installation, Testing and Commissioning of 125 KVA (continuous rating output at alternator end at 50 Deg C ambient for actual use after derating because of temp. rise in canopy, power consumed by radiator, ventilation fans) 415 volts, 3 phase, 50 HZ, AC alternator coupled to diesel Engine Cummins or equivalent to operate on H.S.D.complete with all accessories as per standard specifications service manual, self starting device, fly wheel, coupling with guard, V belts, Heat radiator, common bed plate, vibration isolation pads, residential silencer duly insulated with 50 mm thick glass wool and cladded with Al. foil, first charge of Engine oil. High speed diesel tank capacity of 300 Ltr Tank shall be equipped with float valve. 24 volts chargeable batteries of 180AH, including initial charging of batteries. Cable box for alternator with extension of terminals, connections. The engine shall be equipped with cold starting kit complete with crank case heater as required for Leh Ladakh operating conditions.. ....................... The D.G. Set shall be housed in weather proof enclosure & sound proof canopies fabricated out of 16 SWG CRCA sheet hot rolled MS channel or CRC cold formed pre-fabricated Steel sections, assembled at site with suitable fasteners door to be provided with EPDN gaskets. The acoustic container shall be made of modular construction for easy assembling and dismantling...................... The wall and roof panels should be double walled CRC plain and perforated press bent sheet outside and inside respectively. The mineral wool confirming IS 8183 mattressed covered with fiber glass sheet & perforated poly carbonate epoxy coated sheet to be sandwiched through suitable framing and stiffener channels. The panels should be mounted on the structure through suitable clamps and fastness. Necessary doors and openings shall be provided as per site requirements. The sheet metal components should be hot dippel and seven tank pretreated clamps and fastness. Necessary doors and openings shall be provided as per site requirements. The sheet metal components should be hot dipped and seven tank pretreated........ The container shall be powder coated painted with pure polyester based powder, coated inside as well outside. The manufacture, has to guarantee the temp rise over ambient inside the container from 5 Deg C to 7 Deg C to avoid any deration. The blower circuit shall be controlled through thermostat/contactor. Adequate ventilation to meet air requirement for combustion & heat removal for water cooled engine with suitably rated axial flow fans for supply and discharge with thermostat control with temp setting 45 to 75 degree centigrade to maintain required temp. & ventilation with in canopy to carry warranty for Engine/Alternator. The noise level shall be 75 dbs at a distance of one meter. Minimum insertion noise loss achieved should be 25 db at a distance of 3 meters. The acoustic container shall have approval from CPCB/their designated agency as per Govt. of India notification for noise control.- Fanless Acoustic Enclosure shall be provided.........Diesel Generating Set 125 K.V.A. described as above.
1
-
-
... More
AMF PANEL FOR 125 KVA( Weather proof):- a) AMF Logic panel made of 14 SWG C.R.C.A. sheet cubicle pattern with the following. b) 2 nos. of 250 Amps 4 pole Contactor with built in over current and short circuit releases. c)Indication lamps "fails to start". d) Voltmeter with selector switch with protection M.C.B. e) Ammeter with selector switch and CTS. f) Frequency meter g)1 No. KWH meter, on alternator position with sealing arrangement. h) Indication lamps with alarm and registration for high water temperature and low lub oil pressure, over speed stop. i) Indication lamps "Load on set". j) Start stop relay, k) AMF Relay, AMF Logic l) Emergency stop push button m) Manual start/stop/reset/test push buttons. n) Battery charger with Charge, Boost & trickle arrangement complete with current limiter, D.C. voltmeter & Ammeter. NOTE:- The AMF panel will be self contained in all respects and shall be mounted with in canopy, or installed outside, shall be weather proof.
1
-
-
... More
Supplying erecting, testing and commissioning of 'C' class M.S. pipe with welded joints etc. as required in following sizes. A) Pouring funnel 200 mm dia.
1
-
-
... More
b) Supplying and fixing hand operated rotary fuel pump.
1
-
-
... More
CABLES:-Supply, laying, installing, testing & commissioning in position of the following size XLPE aluminium conductor armoured cables as per IS: 1554. On cable tray in massonary trench / directly burried in ground. The quoted price shall be inclusive of clamping while laying on tray cost of sand cushioning and brick protection while directly burrying in ground and sadding in case of laying in massoinary trench. a) 3 1/2 x 120 sq. mm cable
25
-
-
... More
d) 2.5 sq. mm copper conductor 12 Core control Cable (Armoured)
25
-
-
... More
Cable termination:- Supplying, installing, effecting connection testing and commissioning cable end joints with solderless crimping lugs, double compression glands etc. as required with earhing of cable glands and Al. / Cu. lugs. a) 3 1/2 x 120 sq. mm cable
2
-
-
... More
d) 2.5 sq. mm copper conductor 12 Core control Cable (Armoured)
2
-
-
... More
Supplying, laying, installing, testing and commissioning of the following size 1.1kV, single core copper conductor, flexible cables between alternator and D.G. control panel. The quoted price shall be inclusive of clamping while laying on tray. All cables to be provided with identification tags. a) 95 Sq. mm. single core Cu. Cable
20
-
-
... More
Cable Termination:- Cutting, peeling, terminating and connecting above mentioned cables with PVC cable gland with Earth Tags and crimped Cu. Lugs. a) 95 Sq. mm.
8
-
-
... More
Supplying, fabricating, fixing cable trays of GI slotted sheet including grouting supports etc. As given below: a) 50 x 200 x 50 x 2 mm
5
-
-
... More
c) 50 x 300 x 50 x 2 mm
5
-
-
... More
Earth work in excavation in all type of soils, sand and moorum, depth of disposal of surplus earth.
5
-
-
... More
EARTHING:- Supply, Installation, Testing & Commissioning of Advance Miantenance Free Chemical Gel Earthing System of 10 feet length, 2 inch dia, 2 mm thick electrolytic grade copper tube duly filled with conducting chemicals with the permenant sealings at the both the ends with the lead terminal at the top along with 5 Kgs of Part A GRIP & 5 Kgs of Part B GRIP combined to form a chemical gel to retain the life span of 30 years with the heavy duty poly plastic earth pit cover.
2
-
-
... More
Supply, Making, Testing & Commissioning of advance maintenance free Chemical Gel Earthing of Dual Pipe Technology (GI) of 3mtr long 50mm dia of outer shell (MS) with the 25mm dia of inner shell (MS) of 80-100 microns galvanized filled with highly conducting metallic compounds with the permenant sealings at both the ends with the lead terminal of 32x10mm size at the top along with 50 Kgs of mixture (Sulphate, Silica, Alumina, Iron Oxide, Titanium Oxide, Calcium Oxide, Potassium Oxide, Chloride, Nickel Oxide, Magnesium Oxide, Sodium Oxide, Zinc Oxide, etc) Resistance Lowering Grounding Minerals. The loss on ignition by mass of the chemical compound shall be less than 20%. The chemical compound should be tested and certified by any International accredited and BIS (Bureau of Indian Standards) accredited laboratory.
2
-
-
... More
Supply, installation, effecting proper connection testing and commissioning of the following size copper earth strips/G.I. Wires as required. A) 25 x 3 mm G.I. strip
30
-
-
... More
b) 25 x 3 mm Cu. Strip
30
-
-
... More
EXHAUST SYSTEM: Supplying, installing, testing & commissioning of exhaust including cost of hangers, supports etc. A) 125 mm class B.M.S. black pipe with bends & other accessories as required.
5
-
-
... More
c) Thermal insulation with 50mm thick rock wool and cladded with 0.6 mm Al. foil for 125 mm dia.
5
-
-
... More
e) Supplying and fixing 150 mm dia hume pipe for crossing the cables under the roads and paved areas.
5
-
-
... More
g) Making masonry manholes and drawpits of 300 x 300 x 450mm size complete with CI manhole cover.
2
-
-
... More
h) Supply and fixing 5 Kg. ABC fire extinguishers.
2
-
-
... More
j) Supply, fabrication, installation of steel fabricated cable supports for support of fuel tank, exhaust pipe supports including, welding, grouting and painting as required.
1000
-
-
... More
k) Supply and laying of ISI mark 1100 V grade 1 meter wide rubber mats.
6
-
-
... More
m) Supply and installation of shock treatment charts as per local supply authority duly framed.
1
-
-
... More
Obtaining permissions from various concerned departments and handing over to client for one no. D.G. Set.
1
-
-
... More
EXTERNAL ELECTRIC WORK:- Design & Supplying, installation, testing and commossioning of following L.T. Panels manufactured out of 14 S.W.G.C.R.C.A. sheet, totally vermin and dust proof duly painted complete with bus bars, neutral links, earth strips, cable alleys etc as required and as per detailed specs with following components & generally to accordance to Cat. drg. attached. (Note:- The bidder should take into consideration derating factor of various components because of height & temperature conditions of LEH as recommended by Manufacturer.) INCOMER :- 1 Sets of 250 Amps. 415 Volts. 4P MCCB of 35kA with overload, S/C and earth fault protection MAIN BUS BARS:- 1 set of 315-Amps 3 phase 4 wire 415 volts 50 HZ aluminium bus bars with colour coded PVC heat shrinkable sleeves (Neutral to be equal to phase size).METERING:- a) 1 Set of Digital multi function meter with 250/5A CTs,CT shorting links R/Y/B LED indicating lamps and 2A control SP MCBs b) 1 set of "ON", "OFF" and "TRIP" Indication lights LED type with protection MCB's. OUTGOING:- a) 2 Nos. 100 Amp TPN M.C.C.B. of 25 KA with O/L and S/C protection b) 14 Nos. 63 Amp 4P M.C.B. of 10 KA c) 1 Nos. 40 Amp 4P M.C.B. of 10 KA d) 1 Nos. 40 Amp DP M.C.B. of 10 KA e) 1 Nos. 63 Amp DP M.C.B. of 10 KA MAIN PANEL AS DESCRIBED ABOVE
1
-
-
... More
Design & Supplying, installation, testing and commossioning of following M.C.B., MCCB duly enclosed in M.S. Weather Proof enclosures in following capacities with proper cable end boxes. A) 63A DP MCB
1
-
-
... More
c) 63A TPN MCB
1
-
-
... More
OUTDOOR TYPE DISTRIBUTION BOARD:- Supplying, Installation, Testing & Commissioning of OUTDOOR TYPE VERTICAL TPN DB suitable for 415V, 3 Phase, 4 wire 50 Hz AC supply system as per following gears 1 Set of 100 Amps 415 Volts 4P MCCB. of 16 KA with built in protections. INCOMER: MAIN BUS BARS:- TPN Cu bus bars of minimum of 150 Amps capacity with heat shrinkable coloured sleeves METERINGL:- 3 Nos. phase indication lights LED type with protection MCB. OUTGOINGS:- 4 Nos. 32 Amps. TPN MCB of 10 KA 12 Nos. 32 Amps. DP MCB of 10 KA 8 Nos. 5-32 Amps. SP MCB of 10kA VERTICAL TYPE TPN DB AS DESCRIBED ABOVE.
2
-
-
... More
Supplying installation, testing & commissioning of outdoor type Vertical TPN DB with follwing accsessories (External Lighting DB X1) TYP-X2,. Note:- DB shallhave suitable arrangement for terminating xlpe armoured cable at outgoing side. .Incomer: 63A 4P RCBO 100mA Outgoing 1: 63A 4P TPN with Auto / Manual Selector Switch, On / Off Push Button with On / Off Indication Lamps, RYB Indication on incoming side of MCB Ccontrolling 63A 4P contactor with twin dial clock switch timer (Summer / Winter) :- Outgoing 2: 4 nos. 10-16amp SP MCB of 10kA Sub Outgoing: 12 Nos. 16A DP MCB Above Switchgear to be housed in Flexy DB with IK09 rating or should be fabricated as per requirement.
2
-
-
... More
SUPPLY OF L.T. CABLES AND CABLE ACCESSORIES WORKS :- Supply of the following size XLPE insulated aluminium conductor armoured cables as per IS: a) 3 1/2 x 150 sq. mm cable
100
-
-
... More
a) 3 1/2 x 35 sq. mm cable
60
-
-
... More
4 x 16 sq. mm cable
120
-
-
... More
2 x 6 sq. mm cable
600
-
-
... More
Supply & Laying of the following size PVC insulated copper conductor sheathed circular cables as per IS: in FRLS PVC conduit including bend, junction box etc of suitable size min 25mm directly buried in ground including termination including PVC gland required for thermoplastic junction box in form of loop in and loop out for uplighters, bollard etc. lights as per direction of electrical incharge a)3 core 2.5 Sq. mm.
400
-
-
... More
Supplying and fixing water proof junction box made of thermo plastic (IP65) size 80 mm x 80 mm x 50 mm internally embedded gasket, rust proof, shook proof, with terminals for connecting incoming & outgoing cables, and IP65 glands for cable entry.(Trinity Touch / Hensel Make)
20
-
-
... More
Supplying of all material to Making masonry manholes and draw pits of 450 x 450 x 450mm size complete with CI manholes cover.
2
-
-
... More
Supplying of all material to Making masonry manholes and draw pits of 300 x 300 x 450mm size complete with CI manholes cover.
2
-
-
... More
M.S. SECTION SUPPORTS:- Fabrication, Supply, Installation of various MS Section fabricated support and frame for Feeder Pillar to keep at suitable height from ground etc. Cost to include supply of all material & Labour including two coats of Zinc Chromate primmer & final air drying enamel, paint of approved shade, Anchor bolts, minor civil work. 8 mm flexible steel wire rope with levelers, adjusting clamps etc. All fabricated frames and supports to be painted with 2 coats of primer and 2 coats of wet paint (shade: RAL 9010) before fixing the same
350
-
-
... More
SUPPLY OF INTERNAL LIGHT FIXTURE & FANS:- Supply of the following Light fixtures complete with all accessories like lamps, ballast etc.18-20W linear 4ft LED for wall and ceiling mounting integrated batten made of ultra slim co-extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.White finish ABS end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. High efficiency long life LED with lumen efficacy of 130 lm/W with viewing angle of 120º.Powered by an integral isolated low THD electronic LED driver. Lumen Output of 1860 lumens with System efficacy of 105lm/W .CRI 80, Color temperature 3000K, THD 20% and PF0.95,IP20 . Life class of 35,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV. Havells Cat Ref. LUMILINEBS18WLED80S57CWH OR SIMILAR AS PER APPROVED MAKE LIST
8
-
-
... More
15-18W LED downlight recess/surface mounting luminaire , Aluminium powder coated white after phosphochromate treatment with system lumen efficacy of 100lm/W with Output Short-circuit protection, Surge protection . Lumen Output of minimum 1800 lumens.CRI 80, Color temperature 5700K, THD 10% and PF 0.95,IP20,Life class of 50,000 hrs @ L70, Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV. Havells Cat Ref- INTEGRAHEDLR18WLED857S or similar
32
-
-
... More
10-12W LED downlight recess mounting luminaire, Aluminium powder coated white after phosphochromate treatment with system lumen efficacy of 100lm/W to enhance the lumen output with Output Short-circuit protection, Surge protection. Lumen Output of 1000 lumens.CRI 80, Color temperature 5700K, THD 10% and PF 0.95,IP20,Life class of 50,000 hrs @ L70, Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV. Havells Cat Ref- INTEGRAHEDLR10WLED857S or similar
27
-
-
... More
24-28 W 2x2 Panel recess mounting luminaire with suitable wattge as per design high performance LEDs, suitable for mounting with Armstrong/Grid ceiling.CRCA powder coated white after phosphochromate treatment. LED module is mounted on FR4 with lumen efficacy of 140lm/W to enhance the lumen output and viewing angle of 120° to ensure better uniformity.Powered by an independent Isolated, electronic LED driver with Output Short-circuit protection, Surge protection & other reliability test. Lumen Output of 3600 lumens.CRI 80, Color temperature 6500K, THD 10% and PF 0.95,IP20,IK03.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV.
85
-
-
... More
Supply of 9-10 W Bulk Head light fixture Pressure Die Cast with IP66 protection & IK09 impact Resistance
9
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm. dia 390 R.P.M. BLDC High Speed Ceiling fan with Accessories.
28
-
-
... More
Supply, of 450 mm. dia 1400 R.P.M. exhaust fan with louvered shutters.
7
-
-
... More
EXTERNAL LIGHTING:- Supply, installation, testing & commissioning of 32 mm dia P.V.C. black pipe to be used as sleeve for cable, bent in shape as required on site.
20
-
-
... More
Supply, installation, testing & commissioning of 30-35W LED Post top fixture should be: IP 65 made up of Elegantly designed die-cast aluminum housing, spun aluminium landscape luminaire Ø of 329mm, Height (H) 405mm and Mounting Hole Distance (D) of 76mm. Operating temperature: -10°C to +45°C. with system wattage of 25W , with system Efficacy of 95 lm/w or more, Sytem Lumens 3500, Powered by built-in, electronic LED driver with Power factor 0.95, CRI 70, CCT 5700K (ANSI Tolerance),THD(%) 10, with Average life L70B50 @ 50000 hourss, Interal Driver SPD of 4kV and external SPD of 10kV. The product should be BIS approved with R number mentioned on product label.Havells make RUBYPT35WLED757PSYMTOPC OR EQUIVALENT AS PER APPROVED MAKE LIST
To be supported with Product test reports - LM79, Is 10322/IEC 60598 and for LEDs - LM80, RoHS and Photo Biological Safety certificate.
15
-
-
... More
Supply, installation, testing & commissioning of 80-90W LED Flood Light, fixture should be: Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting.
4
-
-
... More
Supply, installation, testing & commissioning of 11-13 W LED Mono ground recessed upligthing luminaire with Die-cast aluminium,tempered transparent glass cover, power consumption of 13W with lumen output of 700. The Luminaire body uses high pressure die-casting aluminium. The cover uses stainless steel while the buried barrel uses high-quality corrosion resistant nylon . Luminaire has a choice of architectural uplighting optics with options of beam angles of 10, 25,40, 60 degrees with dynamic 16 million color combinatonscolors. The diffuser use thickened toughened glass, having an advantages in impact resistance and abrasion. the diffuser and light cover is at the same level. Luminaire should have IP67 and Impact Resistance of IK 10, THD should be less than 10, Inbuilt BIS approved driver. Luminaire should be capable of operating at line voltage of 230V AC. Excellent design in heat radiation performance, So that the temperature of the cover is low, which is safe and provide good protection. High strength toughened glass, can withstand a weight of 2500KG and glass surface temperature limits below 40°C. Dimensions-diameter 186 height-116mm. Havells ENGROSS MINI 13W Mono OR EQUIVALENT AS PEWR APPROVED MAKE LIST To be supported with Product test reports - LM79, Is 10322/IEC 60598 and for LEDs - LM80, RoHS and Photo Biological Safety certificate.
10
-
-
... More
Supply, installation, testing & commissioning of 9.0 mtr. high Tublular Pole made out of G.I. preimered and PU painted, made in two sections - bottom section of 4 mtr. having a dia of 140mm and top section of 5 mtr. having a dia of 76mm, with base plate of 240mm x 240mm x 16mm and flush door at the bottom will be provided with proper strenghtheing to the cutout of the door opening, alongwith ring arm to accomandate of 4nos. light fixture. with 6 Amp. SP MCB, neutral link, earth stud, heavy duty connector (suitable for 6 sq.mm. terminations) including wiring with 3 x 1.5 sq.mm. FR PVC insulated copper conductor wires from flush door to fixture including concrete Foundation of size 450 x 450 x 1100 mm in RCC block with 4 nos. J hook (Bolt) of 20 mm dia and length 850 mm. complete with Nut & washer. The foundation shall be completes with all respect including finishing and earthing as required.
Cat Ref. 9m POLE with base plate with 500mm 4nos. bracket to mount 4 nos. of fixtures.
1
-
-
... More
Supply, erection testing & commissioning of 4.0 mtr. high hot dip galvanised mild steel step pole with grey powder finish, Suitable
for post top mounting. Made in two sections - bottom section of 1 mtr. having a dia of 138-141mm and top section of 3mtr. having a dia of 76mm, with round base plate of 268mm x 10mm and builtin electrical service window of 300mmx110mm with 6 Amp. SP MCB, neutral link, earth stud, heavy duty connector (suitable for 6-16 sq.mm. terminations) including wiring with 3 x 1.5 sq.mm. FR PVC insulated copper conductor wires from flush door to fixture including concrete Foundation of size 450 x 450 x 1000 mm in precast RCC block with 4 nos. J hook (Bolt) of 12 mm dia and length 450 mm. complete with Nut & washer. The foundation shall be completes with all respect including finishing and earthing as required.
Cat Ref. 4.0m STEP LIGHTING POLE HAVELLS( LSSLOG0134)
15
-
-
... More
Supply, erection testing & commissioning of 8-10 W IP 65 LED bollard. Havells Mini Mount IP65. MINIMOUNTBL10WLED857PSYMTOPMMAM 1.0M or equivalent from approved makes list.
15
-
-
... More
Supply of 18 W+/- 1W Hybrid All-In-One Solar Streetlight, Pole Mounted, Al Die cast Housing, PC lens Diffuser,having minimum system lumen efficacy of 150 lm/W and minimum system lumens of 2700, System voltage 12.8V, Output Current: 0.190A-0.650A, No load loss 20mA, Charging Current 4A, Solar input voltage 22V, Over voltage protection 14.8V, Charging Voltage limit 14.6V. The luminaire shall have CCT of 5700K and CRI of minimum 70. The luminaire shall have IP65 and IK08 protection. The LED shall be compliant with Useful L70 life of 50000 Hrs. The luminaire have 50Wp High Efficiency Monocrystalline Silicon Panel, 24Ah LiFePO4 Battery, High Efficiency Battery with higher life of 2000 cycles, Full Power up to 10Hrs, Saving mode up to 30Hrs at fully charged battery, Integral PIR sensor for motion detection, MPPT charge controller with 90-96% efficiency with 4 KV internal surge protection. Makes wipro CAt code: LR19-331-XXX-57-HY
40
-
-
... More
SITC INDUSTRIAL SWITCH SOCKET:- Supply, installation, testing & commissioning of suitable size Metal Box with Cover in front on surface or in recess, single phase 3 Pin 32 A Industrial socket outlet IP4X and 32 A SP MCB, "C" curve with all accessories.
18
-
-
... More
Supply, installation, testing & commissioning of suitable size Metal Box with Cover in front on surface or in recess, three phase 5 pin 63 A Industrial socket outlet IP4X and 63 A TPN MCB, with all accessories.
2
-
-
... More
" MISCELLANEOUS:- Supply, installation of 1.1 KV grade rubber mats of 1 meter width as per approval of Electricity Board.
3
-
-
... More
Supply and installation of the following portable fire extinguishers. A) 4.5 Kg dry ABC Fire extinguishers
2
-
-
... More
5 Kg CO2 fire extinguishers.
2
-
-
... More
Supplying & Fixing of Shock treatment chart duly framed with Glass in local language or as per client requirement.
1
-
-
... More
Supply of standard First Aid Box.
1
-
-
... More
Supply, fabrication, installation of steel fabricated cable supports/Light fixture supports including, welding, grouting and painting as required.
250
-
-
... More
Supplying & Fixing of Caution danger boards enamelled with red and white skull, cross bones and 11KV OR 440V danger notice.
1
-
-
... More
Supplying of Pair of Hand Gloves 11 KV grade made from Rubber.
1
-
-
... More
Supplying of Electricians Comprehensive Hand Tool Kit Comprising of items like fixed spanner set, monkey wrenches (Large and small size), Screw Spanner, Screw driver set with insulated handles and insulated shank, Hack saw with blade, Tester, Wire insulation splicer, Ball pein Hammer etc.( of Taparia make or reputed one). All accessories to be properly fixed inside a box
1
-
-
... More
LAYING OF CABLES AND CABLE ACCESSORIES WORKS :- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Up to 35 sq. mm
80
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Up to 35 sq. mm
100
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in in the existing RCC / Hume / Metal pipe etc as required. Up to 35 sq. mm
600
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
100
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3½ X 150 sq. mm (50mm)
2
-
-
... More
3½ X 35 sq. mm (32mm)
4
-
-
... More
4 x 16 sq. mm (28mm)
4
-
-
... More
2 x 6 sq. mm (19mm)
60
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. a) 63 mm dia (OD-63 mm & ID-51 mm nominal)
450
-
-
... More
90 mm dia (OD-90 mm & ID-76 mm nominal)
150
-
-
... More
120 mm dia (OD-120 mm & ID-103 mm nominal)
100
-
-
... More
Supply, Installation, Testing and Commissioning o IP Dome Fixed IR PoE Camera, 1/2.8",2 Mega Pixels, Full HD, 1920 x 1080p at 30FPS, 2.8 mm fixed lens, Horizontal field of view 110°, .06 lux, mechanical IR filter, dual streams , IR range minimum 30 Meter, H.264 , any IRIS type, true day-night, noise reduction, ONVIF profile S, certifications - CE, UL, FCC, operating humidity 10-90% RH (non-condensing) or better, PVC free, WDR , IP 66 & IK10(Make-Bosch/ Honeywell/Axis)
11
-
-
... More
Supply, Installation, Testing & Commissioning of 32 channel NVR to view and record 32 IP cameras at Full HD(1080p Resolution) at 25 FPS. The NVR shall have 8 HDD slots.HDD of 18 TB to be provided to enable motion based recording for 30 days(Make-Pelco/ Bosch/ Axis)
1
-
-
... More
Supply, Installation, Testing and Commissioning of 32" LED Color Monitor(Make-Sony/ Samsung/ LG)
1
-
-
... More
Supply, Installation, Testing and Commissioning of managed LAYER 2 10/100/1000 NETWORK POE SWITCH 16 PORT(Make-Cisco/ HP)
1
-
-
... More
Supply, laying, Testing and Commissioning of Cat 6 /UTP Cable(Make-AMP/ R &M/ Belden)
800
-
-
... More
Supply, Installation, Testing and Commissioning of Cat 6, 24 port loaded Straight patch panel with labels and label covers, Height 1 U
1
-
-
... More
Supply, Installation, Testing and Commissioning of Cat 6 UTP RJ45 Patch Cords, 1 Mtr(Make-AMP/ R &M/ Belden)
12
-
-
... More
Supply, Installation, Testing and Commissioning of 6 U INDOOR Network Rack including with fan, Cable Managers & 5 Amp. PDU Unit(Make-Natrack/ Valrack/ Rittals)
1
-
-
... More
Supply, Installation, Testing and Commissioning of 25mm FRLS PVC conduit( Make-B.E.C. / ESC )
700
-
-
... More
Supply, Installation, Testing and Commissioning of 25mm PVC flexible conduit (Make-B.E.C. / ESC ) NOTE: ALL THE ITEMS IN THE BOQ ARE INCLUSIVE OF CARRIAGE CHARGES
80
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements