Ladakh Autonomous Hill Development Council Tender

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone.

Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level including curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse Sand) 1st Sort

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Neck of Column- Ground Fl

Centering and shuttering including strutting, propping etc. and removal of form for: Plinth Beam, Beams

Centering and shuttering including strutting, propping etc. and removal of form for: Column

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:1½:3(1 cement :1½ coarse sand :3 graded stone aggregate 20 mm nominal size)

WALL PLASTER - EXTERIOR CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete. 50mm thick with 20 mm nominal size stone aggregate.

Providing and laying heavy duty cobble stones interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a aminimum compressive strength of 281 kg per sqm over 50mm thick sand bed (avg thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and HOM complete as per specification, heavy duty cobble stone 60 mm thick Cobble Pathway- Parking

40 mm thick fine dressed and rubbed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixture with pigment to match the shade of stone and pointing with the same mortar and curing complete. Tile Laying to be done in French Pattern. White sand stone

Precast Interlocking cement concrete tiles 60 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Light shade using white cement

Medium shade using 50% white cement and 50% ordinary

Dark shade using ordinary cement.

Providing and fixing Precast Concrete Kerb Stone blocks of size 300x300x100mm as per sample approved

Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Providing laying, spreading and compacting stone aggregate of specified sizes to WBM specifications (75mm thick) in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density,grading-3as per technical clause 407 by manual means (including loading unloading and haulage complete job including carriage complete

Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandemrollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 16.62.1 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot MixPlant of 100-120 TPH capacity. and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandemrollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot MixPlant of 100-120 TPH capacity.

Providing , laying and rolling 25mm thick compacted open graded premixed carpet in comformity with the latest MOST specification for roads and bridges works with hot mix plant and paver finished using crushed aggregates and including repairing of pot holes, preparation and cleaning of surfaces, repairing of pot holes by way of malting (any depth)upto area of 1 sqm of earth port holes not exceeding 10% of total surface area uncl laying of prime coat/bitumen emulsion, seal coat including cost of material hire charges of plant machinery and equipments and inclusive of all carriage charges, lead lift taxes coterie including the costs of materials (complete job)

Providing and laying seal coat sealing the voids in a bituminious surface laid to the surface level, grade an cross fall using A and B seal coat

Providing, laying and making kerb channel 30cm wide and 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth etc. complete as per direction of Engineer-incharge.

Providing and fixing of M35 pre-cast double layer- strength vibrating process - clobber stone - 300x300x100mm including carriage complete job

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing Solar High Mast light with luminarie wattage of 40 watt having coloured temperature 5700 k - 6500 k ,Life Span 50000hours Luminous Efficiency 170 Lumen/watt Lumen Output 3400 Lumen Driver In built DC-DC TYPE Body - Aluminium Extruded / PDC Body Protection IP66Standards Compliance Standard - LM79,LM80 Energy Storage System & Controller: Technical Specs- 20Watt/24Watt Battery (Life po4)Rechargable -12.8v/30AH/BIS standard / MNRE approved Efficiency = 93% Battery Pack Safety = Inbuilt with PCM model Solar charge controller capacity = 12V.5A SOLAR PANEL: Solar Cell- Premium grade poly crystalline Sillicone Type/ Multui crystalline PV Panel / MNRE approved Solar Module Power = 100W Compliance Standard = IEC61215,1CE61701,1EC61730 Life Cycle 20 Years Battery Backup 24 hours

Carriage of Cement / Steel for 05 KM by MT from source to site of work including loading, unloading complete job

Carriage of Sand / Aggregates for 10KM by MT from source to site of work including loading, unloading complete job

Carriage of Stone for 10KM by MT from source to site of work including loading, unloading complete job