Ladakh Autonomous Hill Development Council Tender
... More
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Technical
Technical
Financial
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is "A class".
Bid Capacity
... View More
To determine the bid capacity, specific financial and experiential requirements must be met. These include: 1. Financial Turnover: The bidder must have a financial turnover equal to 30% of the advertised cost in any one year during the last 05 years.
2. Minimum Cash Investment: The bidder shall invest a minimum cash up to 25% of the value of the contract during the implementation of the work.
3. Experience Requirement: The bidder must have completed at least one civil building work equal to 33% of the advertised cost during the last five years as a prime contract in a single allotment. Given an estimated cost of the work as 239.02 lacs (excluding GST), the required bid capacity can be calculated as follows: 1. Minimum work experience: 33% of 239.02 lacs = 78.87 lacs
2. Minimum financial turnover: 30% of 239.02 lacs = 71.71 lacs Formulas for calculation are:
- Minimum work experience = 0.33 * Advertised Cost
- Minimum financial turnover = 0.30 * Advertised Cost Therefore, the bid capacity required to bid for this tender involves both financial and experiential components, with specific values calculated based on the advertised cost.
Technical Capacity
... View More
The bidder must have completed at least one civil building work equal to 33% of the advertised cost during the last five years as prime contract in single allotment duly certified by an Engineer not below the rank of Executive Engineer. Additionally, the bidder must have a financial turn over equal to 30% of the advertised cost in any one year during the last 05 years duly certified by a qualified chartered Accountant. However, specific information on the required prior work experience, similar works completed, amount, and percentage is not mentioned, except for a table that mentions the following percentages and amounts related to the bid evaluation process: 1. Up to 10% below adv. cost, nil
2. More than 10% to 20% of below adv. Cost, 05% of adv. Cost.
3. More than 20% to 25% of below adv. Cost, 7.5% of adv. Cost.
4. More than 25% to 30% of below adv. Cost, 10% of adv. Cost.
5. Beyond 30% below adv. Cost, 12.5% of adv. Cost.
Costs
EMD
₹ 4,78,040Document Cost
₹ 2,390Tender Fee
Refer Documents
Summary
Construction Of Mini-stadium/ Open Air Theatre At Dudoo Thang, Chanigund, Kargil.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_LAHDC_15677_1Bid Award Id
ViewTender No
E-TENDER 37 OF TDA KARGIL2024-25Tender Authority
Ladakh Autonomous Hill Development Council ViewPurchaser Address
-Website
http://tenders.ladakh.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dumping of stone including cost of stone
71.01
522
37093.49
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
71.01
4409
313099.42
... More
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)
292.72
6506
1904500.72
... More
Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level including curing complete with:
Cement mortar 1:6 (1 Cement : 6 coarse Sand) 2nd Sort
195.73
8461
1656132.21
... More
Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone
26.89
2764
74337.14
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1125.98
187
211211.33
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.
116.93
242
28374.23
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.
621.82
489
304343.58
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.
284.46
629
179002.14
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.
499.09
608
303766.14
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Slab Edge Shuttering
243
222
53994.6
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
80.27
7962
639145.86
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral
stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
199.61
8323
1661473.8
... More
Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically Treated bars of grade Fe-500D or more
33586.28
104
3506407.63
... More
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:1½:3(1 cement :1½ coarse sand :3 graded stone aggregate 20 mm nominal size)
204.56
10911
2232156.67
... More
WALL PLASTER - CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)
1607.37
246
396313.15
... More
6mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
446
207
92504.86
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick
384.03
114
44013.68
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
384.03
81
31436.7
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1 mm thick
1516.32
114
173785.44
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
1516.32
126
191526.38
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete. 50mm thick with 20 mm nominal size stone aggregate.
450
508
228622.5
... More
20mm cement plaster finished with a floating coat of neat cement of mix : 1 : 3 ( 1 cement : 3 fine sand)
39.07
432
16912.62
... More
Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :
740
1616
1195877
... More
P/L of local dressed stone (Yamangs) laid over concrete base in 1: 4 mix Cement mortar filling the gap including cost of Stone
220
3932
865084
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately): Locally Available Stone - exposed face fine dressed with rough backing 40mm Thick
295
3369
993943.5
... More
LAMINATED FLOORING
Providing and fixing Interlock Laminate (AC-3) on floors including necessary fittings and accessories.All Job Complete
1050
93
97881
... More
VITRIFIED FLOOR TILES
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete
11.52.2 Size of tile 600x600 mm
350
1194
418190.5
... More
Chequerred precast cement concrete tiles 1'x1' ; 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .
410
1003
411406.3
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
372.12
1041
387603.91
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube - 1" Outer Dia @4kg/m
450
150
67558.5
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block M-30 grade made by block making machine with strong vibratory compaction of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand ,filling the joints with coarse sand etc all complete as per direction of engineer .
150
691
103750.5
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood
2.13
85662
182460.21
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood
86.84
1953
169683.62
... More
Providing and Fixing UPVC Window with casement /casement cum fixed glazed with DGU ( Double Glazed Unit) .Including all accessories as per requirement for fixation.All Complete job.
760
932
708472
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
258
175
45335.76
... More
Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :
86
35
3046.12
... More
Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.
86
71
6165.34
... More
Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm
129
62
8004.45
... More
Providing and fixing ISI marked 100mm -mortise door lock- silver satin finish with 3 keys with 6 lever double stage lock set, with necessary screws etc complete OF make Godrej, Harrison or equivalent
43
1694
72881.13
... More
Applying priming coat:
13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
2
53
107.02
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
2
109
218.72
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
1900
133
252700
... More
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved urface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gram/m2
250
1136
284035
... More
Providing and fixing MS Signage displayStand,with base of 7'x 1.5'x2.5' made of coursed rubble masonry or cladded with yamangs(local stone).The display Sheet for Interactive signage stand( 6' * 4') with a back support of Masonry wall .With complete finishing and size of the display sheet as well as text to be written as directed by engineer in charge.All job complete
1
25423
25423.72
... More
Providing and fixing Wooden Shingstak All Job Complete.(All Floors included)
120
2118
254236.8
... More
Carriage of material by MT from source to site of work including loading, unloading complete job Cement & Steel ----------------5Km
215.24
175
37806.91
... More
Carriage of material by MT from source to site of work including loading, unloading complete job Sand --------10 Km
609.94
269
164092.16
... More
Carriage of material by MT from source to site of work including loading, unloading complete job Stone Aggregate
1205.41
269
324291.45
... More
Carriage of material by MT from source to site of work including loading, unloading complete job Stone --------10 Km
526.9
239
126013.4
... More
ELECTRICAL WORKS Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A
110
759
83548.3
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A
6
490
2942.76
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
530
176
93757
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
530
211
112285.8
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 10 sq. mm + 1 X 6 sq. mm earth wire
50
347
17372.5
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.4 X 16 sq. mm + 2 X 6 sq. mm earth wire
50
796
39830.5
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm
76
95
7245.08
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
14
424
5946.92
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
4
524
2097.44
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 6 way (4 + 18), Double door
1
3912
3912.07
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps
1
1095
1095.33
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"
curve, miniature circuit breaker suitable for inductive load of
following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
17
210
3583.6
... More
Supplying and fixing single pole blanking plate in the existing
MCB DB complete etc. as required.
2
8
16.94
... More
MAIN PANEL : Incoming:1 no. of 80 Amp FP MCCB of 25KA breaking capacity. Metering for incoming: Digital Multifunction meter with RS-485 communication port for measurement of PF, V, A & Hz , equivalent to EM6459,with CT as required. Phase indicating lamps RYB with 2 Amps SP MCB back up. ON / OFF indicating lamps Bus Bars Electrolytic high conductivity aluminium three phase and neutral busbars rated at 100 Amps, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. Current density of Bus Bar to be 1.3 sq.mm / amp. Outgoings 1 no. of 63 Amp 4P MCB of 16KA breaking capacity. MAIN PANEL as described above .
1
42372
42372.88
... More
Cast Iron - Manhole Cover 2x2 ft
7
2542
17796.59
... More
Providing and fixing 15 w outdoor waterproof LED IP-65 Long distance spot light having body made of cast iron.Design and colour as approved by Engineer in charge.
5
2118
10593.2
... More
Providing and fixing 5 w outdoor waterproof LED IP-65 Square Waterproof Recessed Aluminum Embedded Foot Light of make Hvells , Philips or equivalent.Design and colour as approved by Engineer in charge.
30
2372
71186.4
... More
Providing , supplying and commissioning of automatic 15 A timer switch of make L&T, Schinder, Havelles or equivalent to be connected to all outdoor lights.All complete
4
2542
10169.48
... More
SITC OF 7 W LED 6500 K Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver. MAKE :- Havells Model:- LHEBHDP7IZ1W012 or Equivalent
18
720
12965.94
... More
SITC OF 12 W LED 6500 K Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver. MAKE :- Havells Model:- LHEBHDP7IZ1W012 or Equivalent
56
870
48738.48
... More
SITC of Bracket Light on Wall as/Specification - Decorative, wall mounting, antique brass finish fixture with opal glass diffuser suitable for 12 W A60 LED filament lamp E27 base.Make:- Havells Model:-LHFOAJD1TZ1T060 or Equivalent
12
1771
21254.16
... More
SITC of 5 W WH LED Mirror Light as/Specification,Polycarbonate housing,system watage -10 w,Lumen pack - 1000w with eficacy - 100lm/w,CRI-80. , IP -20 with IS 10322 (part 5/Sec.1)-2012.
10
338
3389.8
... More
SITC of 300 mm Sweep Exhaust Fan As/Specification
2
2118
4237.28
... More
Supply, Providing Connection to LED smart light with control panel (Junction Box) with 1.5Sqmm FR PVC insulated copper cable.
400
27
10844
... More
Supply, Laying & Jointing of 16 Sqmm 4 core 1100volt grade aluminium conductor PVC insulated and armoured power XLPE inner sheathed armoured power cables of Havells/ Poly Cab or equivalent make complete and as required
400
144
57624
... More
Supply, fixing and crimping of cable thimbles for 16Sqmm 4 core cable at the end of terminations of the cable including providing of insulation tape.
8
76
610.16
... More
Supply, Laying & embeding of DWC pipe in PCC along the line from existing DT to on site for insertion of XLPE Cable for protection, best Insulation & for easy maintenience. Diameter of DWC =40mm
400
254
101692
... More
ST pole 09 Mtr. Long (410Mpa-SP-33, working load of 300KG) complete with pit excavation in hard soil, refilling the pit with soil and boulders as per REC Standard for sub-station
2
15254
30508.46
... More
Supply and erection of GI V- cross-arm (75 x 40x6mm) with GI Angle Pole Top Bracket (50x50x6 mm) including back clamps of 50X8 mm for fixing V-Cross arm and pole top bracket without making holes in the ST pole along with nuts & bolts as per REC standard for single pole structure.
1
2542
2542.37
... More
Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type
1
767
767.11
... More
11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
1
7627
7627.11
... More
11 kV Horn Gap Fuse Set 3 Phase 200A
1
6779
6779
... More
50mm² (2Ckt) Cable for 16KVA, 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type
40
211
8474.4
... More
11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm
3
296
889.83
... More
GI Channel/Angle/Flat of sizes including clamps for Sub-station (Refer REC Contrauction Standard F2)
300
169
50847
... More
Galvinized Nuts and Bolts.
12
161
1932.12
... More
11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm
8
296
2372.88
... More
LT Distribution Box for 16KVA DTR with MCCB for incomer & SFU's for Outgoing Circuits as per REC standard
1
16101
16101.69
... More
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI
stranded wire complete (Sub-station pole)
2
3389
6779.66
... More
Wedge Connectors / PG Clamps
6
169
1016.94
... More
Danger Plates with Clamps (HT/LT)
1
161
161.01
... More
GI Barbed Wire for Anti Climbing (Sub-station pole)
15
169
2542.35
... More
3-Ø, 4-Wire Trivector Meter with CT (AMR complaint)
1
17796
17796.61
... More
Cement bottoming 1:2:4 mix as per REC standards
.5cum/pole
2
3389
6779.66
... More
Painting of Poles Red Oxide
3
254
762.69
... More
Painting of Poles Aluminium Paint
3
762
2288.13
... More
Sundry items like aluminium lugs, Jumpers, binding Tape (for sub-station)
3
593
1779.66
... More
GI channel (75x40x6 mm) cross arms 4' including back clamps of 50X8 mm along with nuts & bolts as per REC standard.
1
1694
1694.91
... More
0.03 ACSR Weasel Conductor including jumpering (single conductor length) in HT/LT line
0.3
29661
8898.3
... More
LT Shackle insulator along with nuts & bolts as per REC standard.
4
101
406.76
... More
PLUMBING WORKS Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
20
4899
97988.8
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
17
3500
59508.5
... More
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm
4
5184
20738.96
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
4
492
1970.84
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore
68
491
33423.36
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
17
1338
22759.77
... More
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length
68
95
6479.72
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineerin- charge.
27
734
19819.62
... More
Providing and fixing toilet paper holder : C.P. brass
20
851
17038.8
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
12
242
2911.92
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
20
347
6951.6
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diametre
32
536
17155.2
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams.
4
57
230.64
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. Internal Exposed on walls
4
232
928.28
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c
fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.Internal Exposed on walls PN - 16 Pipe, 32mm OD (SDR-7.4)
25
315
7881.25
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c
fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. PN - 16 Pipe, 40mm OD (SDR-7.4)
10
428
4281.3
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c
fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. PN - 16 Pipe, 25mm OD (SDR-7.4)
90
386
34802.1
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c
fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. PN - 16 Pipe, 32mm OD (SDR-7.4)
50
435
21786
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm dia nominal bore
4
584
2338.28
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm dia nominal bore
12
633
7605.24
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm dia nominal bore
5
705
3526.45
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore
3
477
1433.37
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :25 mm nominal bore
3
439
1318.2
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
2220
13322.28
... More
Providing and fixing inslulation of pipes with self regulating heat tape wire of make Denfoss or equivalent along with a layer of foam insulation (50mm thick) of make K-Flex of equivaluent with protective outer layer along with a self regulating timer. all job complete
175
1525
266948.5
... More
Insulation of Water Tank with 75 mm galss wool and and cladding with Aluminium Sheet .All complete Job
3000
29
88980
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ( 3 tanks 1000 l cap each)
3000
14
42000
... More
Providing and fixing 100% stainless steel grating with frame of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works.125 x 125 x 1mm
10
1694
16949.1
... More
Providing and fixing 100% stainless steel grating with frame of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works.75x75 x1 mm
2
1059
2118.64
... More
Providing and fixing SS Floor clean out/clean out plug with SS cover and EPDM seal complete in all respects including fixing of SS cleanout plug with CP brass screws. (Make:Chilly or Equivalent) 100mm dia
5
762
3813.55
... More
Providing and fixing uPVC P/S trap(Type-B, IS:13592) of self cleansing design with or without vent arm complete, including cost of cutting and making good the walls and floors.(Make:Supreme/Finolax) a) 110mm outer dia inlet and 110 mm outer dia outlet uPVC as per IS:13592
4
381
1525.4
... More
Providing and fixing 110mm outer Dia uPVC inlet fitting approximately 450/600 mm long with one or more 40/63mm outer dia. uPVC sockets solvent welded complete.(Pipe class-V, Sockets class-V) (Make:Finolax/Prince/API Apollo)
4
190
762.68
... More
Providing and fixing uPVC Pipes complete (I:S 4985 class-V) with uPVC fittings e.g. elbows, tees , reducers, unions , plugs etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W.B., Urinals, floor drain etc. (Make:Finolax/Prince/API Apollo) 40mm outer dia
10
169
1694.9
... More
Providing and fixing uPVC Pipes complete (I:S 4985 class-V) with uPVC fittings e.g. elbows, tees , reducers, unions , plugs etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W.B., Urinals, floor drain etc. (Make:Finolax/Prince/API Apollo) 40mm outer dia
4
211
847.44
... More
Providing and fixing uPVC pipe conforming to IS:13592 class-B with all fittings (door or plain) conforming to IS:13592. The fittings shall include cost of bends, junctions (double or single), terminal guards, etc. The quoted rates shall include cost of jointing coupling with solvent cement for horizontal pipes and rubber ring for vertical pipes and pipe supports. All items complete nothing is payable for any other fittings.(Make:Finolax/Prince/API Apollo) For Vertical Pipes 110 mm outer dia
25
466
11652.5
... More
Providing and fixing uPVC pipe conforming to IS:13592 class-B with all fittings (door or plain) conforming to IS:13592. The fittings shall include cost of bends, junctions (double or single) etc. The quoted rates shall include cost of jointing coupling with solvent cement for horizontal pipes and pipe supports. All items complete nothing is payable for any other fittings.(Make:Finolax/Prince/API Apollo) For Pipes Inside Toilets 110 mm outer dia
45
508
22881.15
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements