Ladakh Autonomous Hill Development Council Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 25,70,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_LAHDC_14274_1Bid Award Id
ViewTender No
fresh e-tender 16 of ZDA Zanskar24-25Tender Authority
Ladakh Autonomous Hill Development Council ViewPurchaser Address
-Website
http://tenders.ladakh.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Ordinary rock
471.97
188788
400
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kind of soil
144.45
28890
200
Ordinary rock
184.96
73984
400
Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr.
1238.02
245127
198
Disposal of excavated earth including all type of carriage and lead up to avg. 5.0km
971.56
194312
200
soling stone including cost of stone (on horizontal)
203.11
132021
650
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 cement : 6 course sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with cement mortar 1:6 ( 1 cement : 6 course sand) quarry
120.15
540675
4500
Dry random rubble masonry with hard stone in foundation and plinth:With bond stone, quarry stone
42.12
105300
2500
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud Mat
161.27
790223
4900
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) (crushed) .
705.5
4938500
7000
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40mm thick with 20 mm nominal size stone aggregate.
987.49
473995
480
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills,fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
43.57
470556
10800
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size)
1117.72
11736060
10500
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
155790.26
17136928
110
Centering and shuttering including shuttering propping etc and removal of form for Foundation,footing bases of columns etc for mass concrete.
143.07
55797
390
Centering and shuttering including shuttering propping etc and removal of form for Columns, pillars, piers, abutments, posts and struts.
1413.4
918710
650
Centering and shuttering including shuttering propping etc and removal of form for Suspended floors, roofs, landings, balconies and assess plate forms.
1377.16
853839
620
Centering and shuttering including shuttering propping etc and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers.
2880.54
1814740
630
Centering and shuttering including shuttering propping etc and removal of form for Stairs (excluding landings) except spiral staircases.
417.72
292404
700
Providing and fixing rolled steel sections of diferent shapes (angle/channels/T- section/I setion ) conforming to IS: 4351, and applying a priming coat of approved steel primer all
complete job, including welding
2536.05
393087
155
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Complete job. Truss Area = 10416/10.75=968.93sqm @43.4
KG/SQM
47962.03
7913734
165
P/F colour coated track deck of 0.50 mm thickness CGI roof sheetsincluding all nuts bolts and fixtures complete job.
1014.89
1583228
1560
Providing ridges or hips of width 60cm overall width plain G.
S. sheet fixed with poymer coated J. or L hooks, bolts and nuts 8mm G. I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275gm /m2 specifications as per engineer in charge
317.44
279347
880
Providing and laying autoclaved aerated cement blocks masonry with 300 mm thick AAC blocks in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. The rate includes providing and placing in position 2 nos. 6 mm dia
M.S bars at every third course of masonry work, including
carriage charge
695.6
7999400
11500
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) 2nd class kail wood
4.28
492200
115000
Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class teak wood 35 mm thick shutter)
23.56
82460
3500
Providing fixing paneling and glazing in panalled or panalled glazed shutters for door/windows 25mm to 40mm thick of 1st class kail wood..
35.33
98924
2800
Providing and fixing of glass panes, of thickness 4.0 mm including all type of fixture by way of wooden beading of 1st class kail wood etc complete. (weighing not less than 10 kg/sqm)
17.62
21144
1200
Providing wood work in frames of walls,false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood
9.02
766700
85000
Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood
851.52
2299104
2700
Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job
851.52
110697
130
Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge.With resin bonded rock wool with density 48 kg/cum
903.35
361340
400
Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben, Robina or any other approved brand as per specification approved by engineer In charge )
195.18
487950
2500
Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 12 mm thick 2nd class teak wood
167.05
534560
3200
Providing and fixing 19 mm thick plywood of appoved brand (Century Ply Or Greenply Industries Limited (GIL) Or any approved Brand ) and manufacture including fixing of decorative laminate sheet over 19mm ply using synthetic resin adhesive , nail,screws,hinges ,Handels , Ball Bearing Telescopic Channel (Godrej or any other approved brand) and carriage all complete.
71.63
91686
1280
P/F 6mm ply for partition shelf insulation etc
20.1
17085
850
Providing and fixing 5mm thick glass panes in almerah with sliding arrangement including all necessary fixtures and screws all complete
3.35
3350
1000
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 2.5 Kg/m 10 Gauge Thickness
CORRIDOR OF FIRE EXIT Powder coated aluminum (minimum thickness of powder coated 50 microns)
25.1
13805
550
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM (2.3 Kg/m 10 Gauge Thickness)
92.1
47892
520
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc.
complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
3.72
6138
1650
CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand)
4902.84
2549476
520
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete..
4902.84
735426
150
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (Black Paint to be used for Trombe Wall)
4902.84
784454
160
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
4902.84
980568
200
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
281.21
33745
120
Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete.
281.21
64678
230
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
281.21
59054
210
Providing & Fixing finished brass hanging type floor door stopper with necessary screws etc complete.
69
15180
220
MARBLE STONE FLOORING
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry
including rubbing, polishing and curing complete with: Agaria white 16mm
280.47
1121880
4000
Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Medium shade using 50% white cement and 50% ordinary cement.
372.1
669780
1800
Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm
98.18
235632
2400
P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete.
568.19
1022742
1800
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests. JAGUAR/CERA Make
21
159600
7600
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.
12
120000
10000
white vitreous china clay half stall urinal flat back each 1053.00
580x380x350 mm or angle back 450x375x350 mm with
waste fittings as per IS:2556
5
6000
1200
Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps JAGUAR / CERA/HINDWARE Make
30
105000
3500
P/F Stainless steel 304 Grade kitchen sink Square Shaped Double Bowl Kitchen Sink 47 X 20 X 9 Inches Vessel Sink (Steel) of approved brand and manufacture Hindware/Jaquar/Imperio/Kaff or any approved brand as per Engineer In Charge
3
3600
1200
P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm
5
5850
1170
Hi-Flow MP1-2 HPCentrifugal Pump Havells/ Cromton/Kirloskar (Note:Pump should be minimum BEE 3 star labelled or above).
1
13000
13000
P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500
x 450 mm
20
24000
1200
Providing and fixing soil waste & vent pipe PVC Pipe. 110mm dia (10 feet unit Length)
45
68400
1520
PVC Pipe. 75mm dia (10 feet unit Length)
41
51250
1250
PVC Bend 110mm dia
39
14430
370
PVC Bend 75mm dia
36
13320
370
PVC Tee 110mm dia
35
13650
390
PVC Tee 75mm dia
36
14040
390
PVC Collar 110mm dia
30
9000
300
PVC Collar 75mm dia
30
9000
300
PVC trap 110mm dia
34
17340
510
PVC trap 75mm dia
33
17160
520
PVC Socket 110mm dia
30
9300
310
PVC Socket 75mm dia
30
9300
310
PVC door junction 110mm dia
29
11890
410
PVC door junction 75mm dia
28
11480
410
Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
PN-16 pipe , 25mm OD(SDR-7.4)
900
567000
630
PN-16 pipe , 32mm OD(SDR-7.4)
700
497000
710
P/F CP brass toilet paper holder including cost of
wodden,PVC,play etc.
36
39600
1100
Providing and fixing Wall mount Liquid Soap Dispenser of
approved brand
36
79200
2200
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm
wide and effective height of 88 mm, weighing not less than 170 gms
36
43200
1200
Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required. L-Drops for room door
55
17050
310
L-Drops for Windows
133
42560
320
Handles for door
83
69720
840
Handels for window
78
56160
720
15 mm C.P. brass tap with elbow operation lever
83
70550
850
15 mm C.P. brass 2 in 1 tap
48
40800
850
Handles with lock system of main doors ( Godrej Make)
44
38280
870
Providing and fixing Stainless steel SS-304 Grade L Shaped 90° Wall Mounted Grab bars Near EWC (European Water Closet) of approved brand for Disable-friendly Bathroom/Toilets as per standard and specification.
1
4980
4980
Providing and installation of PUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per direction
engineer incharge
6
210000
35000
Placing and fixing of 25 mm dia. 2mm thick ISI marked, PVC
conduit pipe for carrying electrical wiring in the slab with light box and fan box complete job
900
135000
150
Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge)
600
2700000
4500
Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) , rockwool of apparent density 128 Kg/m3 on outer side of nitrile tube of 50mm thickness including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM
)of approved quality and finish as per the direction of engineer in charge (Nitrile Tube 32mm Rock Wool 50mm Alumunium Duct Clading 0.46mm to 0.71mm)
1100
990000
900
Provision for providing and fixing ornamental Shingstak (Ladakhi wood carving over exterior Windows and main entrance door) (Design as per the direction of Engineer-In-
charge.) including polishing all complete
1000
5000000
5000
Providing and fixing factory made uPVC AIS or FENISTA or KOEMMERLING or ENCRAFT art of precision,make white/wood Finish colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality nad brand all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with 0.25 and 0.35 VLT may be introduced.)Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).
198.89
1949122
9800
Providing and fixing factory made uPVC of AIS or FENISTA or KOEMMERLING or Encraft ,make white/Wood Finish colour fixed glazed windows/ventilators comprising ofuPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation inprofile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Double Glazed Unit or SHGC with 0.25 and 0.35 VLT may be introduced.Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
14.51
156708
10800
Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete.
320
3136000
9800
Providing and fixing DGU ( with 0.25 SHGC and 0.35 VLT glazing in uPVC window, ventilator shutters and partitions etc. with proper sealing as per norms etc. complete as per the architectural drawings and the directions of engineerin- charge. ( Note : DGU with 0.25 SHGC and 0.35 VLT)TOUGHENED DGU glass panes of 5.0 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS / HNGIL make as approved by engineer in charge
130.21
286462
2200
Decibel compressed Glasswool False ceiling(main audi hall) Providing and Fixing Decibel compressed Glasswool suspended ceiling system by using Decibel Ceiling Silhouette main-T of size 38x15x0.30mm at every 1200 c/c and cross T of size 28x15x0.30mm are fixed to Main T at 1200/600 mm c/c. Wall angle of size 24x24x0.40mm then fixed along the perimeter of wall with the suitable fasteners. The suspension is done with all accessories like Soffit cleat, levelling clips & wire rods as per drawings and fixing of Decibel Ceiling primo soft micro fiber tiles on grid system using 600MM X 600MM X 15MM and Tiles having Tegular edges & bevel Tegular edges it should have 0.90 NRC value and approved surface design and edge profile. Including providing necessary openings for light fixtures, diffusers etc. are to be made as per lay out & including all accessories, material & labor complete as directed by Architect
/ Engineer – in – charge..( Make:- Decibel Ceiling/ Off / Sound Easy)
544.74
2832648
5200
SLETO WOODEN GROVED ACOUSTICAL PANELING (upto 8ft from floor) "Providing and fixing wall acoustical paneling using Decibel Ceiling Slato Acoustic Panel make Slats L 16 of size 128mmx2430mmx16mm thick up to 2400mm high as per the following specification :-Slats L-16- 2mm
@16mm, 32 x 128 x 2430 mm high grade Pine wood base Medium Density Fiber acoustic boards with Tongue & Groove Edge,2mm slot perforation @ 16mm centre, slates perforations, The acoustic should be furnished with a Black absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887),wood practical core,NRC : should be Up to 0.75,should meet the safety requirements of EN 14190. with using Synco PF Wool with 1000 GSM and 50 MM thick Fixing :- Sound Strut CC18 screw fixed horizontal/vertical to wall at every 600mm c/c. Metal cleat can be fixed on top edges of Sound Strut CS55 fixed directly by stamping to the CS55 and IC91 which is screw fixed directly to the wall where ever required with a backing black color fabric as approved by Architect and as specified including all accessories, material & labor complete as directed by Architect / Engineer – in – charge..( Make:- Decibel Ceiling/ Off / Sound Easy)"
241.12
2411200
10000
Acoustical Woodfiber Panel (Stage Backwall) "Providing and Fixing tiles made of Wood Fibre, 1mm width, and cement composites, 25 mm thick with an option of colours as per the choice of the Architect/ person in charge of size 600x600 mm/ 600x1200 mm. It should have excellent noise absorption of 1.00 NRC as per ISO: 354-1985 and ASTM 423-90 a, Density 400 kg/m3 (minimum), meets stringent Fire Ratings ASTM D-876 and BS:476, weather resistance as per IS 3308, Thermal Insulation as per IS:3346-1980 with relative humidity of 90% RH at 60° Celsius (140° F) for 15 days= No deterioration. Conforms to EN 13168- 2001 and are RoHS Complaint. To be installed on
G.I studs 600x600mm center to center 2400mm x 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management.
Providing and fixing 50mm thick, 1000 GSM polyester wool, tested as per Fire Retardant ASTM D-876 and BS-476.
Providing and Fixing tiles made of Wood Fibre, 1mm width, and cement composites, 25 mm thick with an option of colours as per the choice of the Architect/ person in charge of size 600x600 mm /
600x1200 mm. It should have excellent noise"
Hall side
133.95
669750
5000
Decibel Fabric Absorption Wall Paneling (from 8ft till Ceiling Height) Fabric wrapped Compressed glass substrate panels paneling on walls: Providing and fixing Decibel Ceiling Acoustical Wall paneling with square edge panels made of fiber glass substrate 25mm thick with a density of 110- 120kg/m3, wrapped on the front side with an acoustical and fire-resistant fabric with an option of colors as per the choice of the person-in- charge, of size1200mmX600mm with an NRC of 0.90. The panels shall be wrapped with FR grade fabric of approved color & of minimum weigh 340GSM which is covered with 1 mm thick aluminum profile of four sides of panel. The panels to be pasted with Primo Impeller Calpe with all material and labor etc completed. .( Make:- Decibel Ceiling/ Off / Sound Easy)
452.1
4656630
10300
MAIN HALL DOOR " Providing & fixing of teakwood Four side door frame of section 150x65mm along with fire and smoke in tumescent seal strip of size 12mmx4mm for 120 minutes fire rated and rw 35db acoustic door with minimum thickness of 93mm having infill of 45mm thick resin bonded glass wool of 48kg/m3 density sandwiched by two 12mm thick magnesium board (edge to edge on internal hardwood frame)and cladded with 6mm thick commercial ply facing and 3mm sheet rubber interlayer T. And finished with 1mm thick laminate as per designer and 25mm thick teakwood frame around the door panel as shown in the drawing. The board shall be resistant to vermin, mold growth, minor impact, abrasion and short term water attack and shall be in color as approved by the designer, the door shall have acoustic seal in door rebates and drop dead seal at the bottom of the door, the sound reducing doors also include door closer, door coordinator, panic bar with outside key and including all accessories, material & labor complete as directed by Architect / Engineer – in – charge. Size 2.40 x 1.50 x 1
Make: Decibel Ceilings/Armstrong/ Hunter Douglas"
4
620000
155000
Stage Wooden Flooring : Providing and fixing 75x19 mm teakwood plank (min. 900mm long, properly seasoned) flooring with tongue and groove joints (concealed screwing and minimum length 1.5m) on 12mm thick BWP plywood bonded with phenolic resin with half headless GI nails/steel screws wherever necessary, with joints staggered, fixed with wooden screws to teakwood joists framework comprising 50x50mm teakwood joist 600mm centre to centre in one direction and 50x50mm teak wood battens 600mm centre to centre on other direction with 50mm thick polyester wadding (Oceanz Acoustics H.K/ Autex/ Dupont) of 1000gsm infill, teakwood joists resiliently supported on 150 x 150mm pads of 5mm nominal thickness of waffle, neoprene pad ribbed (50 p.s.i. grade) and 50x50x6mm thick MS angle cleat fixed with 150mm long with 10mm dia GI bolts and expansion fasteners, over floor slab 1200x1200 centre to centre, support locations including providing and applying a coat of ready mixed aluminium primer and a coat of synthetic enamel paint both of approved brand and manufacturer over exposed surfaces and edges of marine ply. Stage edge: Fixing 90x50mm teakwood moulding as per architect on the edges of stage wooden flooring including wax polishing after filling wood filler and sand papering up to smooth finish in natural colour. Entire work to be done complete as per drawings, specifications and direction of Engineer in Charge & Consultant including wax polishing of teak wood planks after filling wood filler and sand papering up to smooth finish in natural colour. All Makes and models of all items/samples should be approved by the consultant prior to the installation.Required anti-termite treatment to be done ant the cost of the same to be considered. Make: Ecotone/Armstrong/Decibel Ceilings/ Hunter Douglas
111.26
1335120
12000
MAIN CURTAIN (VERTICAL SLIDING) Providing & supplying including stitching decorative main curtain, vertically up down slider in art silk, velvet fabric of approved shade and quality. The curtain shall have 100% gathering cloth complete with bottom silk thread lace and same colour grout up to room height. The curtain shall be with vertical sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorized operation complete with runners, master runners, pullies, 6mm to 8 mm steel wire rope, 1.5 HP three face motor. Air breaker contractors , micro switches for auto stop, push button remote control for forward, reverse and stop positions. The curtain should be vertically up down with maximum gathering position. Hamming and bottom finishing at site etc. complete as directed by E.I.C./Architect of the project.
Providing & fixing 35 mm dia road for curtain control equipment with necessary M.S. flat support from ceiling with scaffolding, leveling, necessary M.S. bracket including all accessories, material & labor complete as directed by Architect / Engineer – in – charge. Size : 16 mtr x 6 mtr
1
470000
470000
Providing & Fixing cyclorama curtain cum screen in plastic perforated material. The screen to be fixed on tubular frame made out of 35mm dia MS pipe. Pipe shall be finished with red oxide paint, including all accessories, material & labour complete as directed by Architect / Engineer - in - charge.
85.4
375760
4400
REAR CURTAIN(Horizantal sliding) Providing & Supplying including stiching decorative main curtain in glazed cotton fabric of approved shade and quality. The curtain shall have 50% gathering cloth complete with botton silk thread lace and same colour grout up to room height. The curtain shall be with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pullies, 6mm to 8mm steel wire rope, 1HP motor (crompton) 2nos. Air breaker contractors (L&T/SIEMENS) 2nos. micro switchs for auto stop, 3nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at center should be 900mm. Hamming and bottom finishing at site etc.
1
320000
320000
WING Providing & Fixing wings(sliding partition) made out of black/blue glazed cotton cloth fixed on wooden frame as per drawing & instruction stated below.: (a) Partition frame shall be made in 75*50 mm with necessary bracking in same thichness in Devdar wood and (soft wood) and as per drg. Light weight partition. (b) Above frame shalll be covered by blue/black colour glazed cotton fabric by black nailing. (C)Top member have sliding fitting in aluminium channel & bearing wheel or in wooden channel etc. including all accessories, material & labor complete as directed by Architect / Engineer – in – charge. Size : 1.5mtr. X 6 mtr.
74.42
372100
5000
AUDITORIUM CHAIR "Tip-Up Chair:-Chair width -53.34cm (21"") center to center), Chair Height - 96.52-101.6cm (38"" - 40"" ) from floor, Seat-Auto Foldable
,Back -Fixed, Seat- PU molded Foam Density - 50 g/mm+5/-5, Back- PU molded Foam Density - 50 g/mm+5/-5,Upholstery - Fabric, 6mm Lamination, Seat Supporting Base Plywood-15mm, Back Clamps - 2.108mm (14g), Side Stand 2 no’s of -75mm*25mmms tube, Footrest
-2.769mm(12g) CRC Iron Sheet deep drown footrest, Armrest - wooden without Cup Holder, Inner Frame of the back made - 25mm*5mm & 20mm*3mm MS Flat, Paint-by Spray gun, Installation: Chairs will be installed to exiting floor with 2 no’s Anchor
fasteners. Make:Wipro/Godrej/Decibel Chairs"
300
660000
2200
Supply installation testing and commissioning of Instant Gyser 15ltr Capacity of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete
6
63600
10600
Providing and Fixing Handles with lock system of main doors LAPO Premium Rose Mortise Door Lock Handle Set/ Mortise Lock with Brass Lock Body and 70mm Brass Cylinder Set with 3 Brass Computer Keys / Zinc Alloy Weather Proof (Matt Finish) or Godrej Locking Solutions and Systems Gloria Antique Brass Door Handle with Lock Set 2C for Home and Office Entrance Door (200 mm, Gold) or any other approved brand as per engineer incharge
5
61500
12300
S/F of Kent water purifier 50 Litre capacity per hour
4
312000
78000
Design Supply and installation/Fixing staircase railling of stainless steel (Grade 304) railing(Top Handrail Dia 50mm , two number intermediate Horizontal tubes Dia 25mm and Rectangular Two Pair Balusters Dia 38mm @1000mm C/C) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) including fixing the railing with necessary accessories , newal post , balusters and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, necessary screws/fixtures complete job as approved by engineer incharge (Note : No additional payment shall be made to master pillar/Newal Post )
450
2025000
4500
Supply , installation testing commissioning of CCTV IP based system for building security comprising of PTZ/fixed camera cabling, digital recording HD display screen with minimum display 5" x 8" per camera and hard ware software support complete
4
260000
65000
S/I of referigerator2 no, washing machine 2no , kitchen set including for terrace cafteria,wash basin and other necessary items for bathroom and minor itemscomplete (including utensil set for terrace cafteria and staff dormitory each)
1
520000
520000
Supplying, installation, testing and commissioning of grid interactive rooftop solar photo voltaic power generation system including space frame
18
1350000
75000
Supplying, installation, testing and commissioning of DG sets AMF panel , bus ducting /cables/ from DG sets to essential panel DG set enclosure rooom sound insulation/ventilation/smoke exhaust as required earthing DG set system control cabling fuel/tank/piping DG set exhaust piping chimney as per CPCB norms incl foundation civil work as required
15
300000
20000
S/F commissioning of auditorium sound system (PA sound SYSTEM) complete icluding all necessary items, fixture complete of approved quality which impart rich look and trendy style to the hall direction as per site engineer complete job
1
1000000
1000000
Supply and fixing of design manafacture and commissioning and 05 years comprehensive waranty and maintenance of 500LPD Solar water heating system (tube collector based) at various site…
3
195000
65000
Carriage of Cement /steel by MT for avg 250 KM
1152.94
2305880
2000
Carriage of Sand/Bajree by MT for avg 15 KM
2615.72
784716
300
Carriage of Stone by MT for avg 15KM
78.18
28926
370
Carriage of Wood by MT for avg 250 KM
16.16
19392
1200
Providing and fixing designed steel gate using angle iron and other necessary items including Local tokul pakchey taditional designed on all four side as per the region culture and gyabib, painting, electrificationetc over the gate in as per direction of site engineer, excluding gate pillar and beams which is mentioned already in above item complete job
1
430000
430000
providing and fixing steel designed grill using builtup sections hollow tubes etc including welding, painting @8kg/rm direction as per site engineer
230
57500
250
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement motor 1:3(cement: 3 course sand) cost of required centering shuttering and finishing smooth with 6mm thick cement plaster 1:3(1cement:3 fine sand) on exposed surface complete 1:3:6(1cement:3 coarse sand :6 graded stone agg, 20mm nominal size ( Nallah)
98.94
1484100
15000
50 mm thick fine dressed and rubbed Granite Cobblestone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixture with pigment to match the shade of stone and pointing with the same mortar and curing complete. Granite Cobblestone (Thickness 50mm) including all charges
400
1400000
3500
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking the clods and mixing with sludge or manure in the ration of 8:1 (8 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8 %), flooding with water, filling with the earth if necessary, watering and finally fine dressing, leveling etc. including stacking & disposal of materials declared unserviceable and surplusearth by spreading and leveling as directed, within a lead of 50 mtr. and lift upto 1.5 mtr. complete ( cost of sludge, manure or extra earth to be paid
for separately)Along pathways & Around Buildings
300
96000
320
Supplying, testing, Installation & commissioning of Drip Irrigation System including all accessories & other necessary items of approved brand as per drawing & Incharge-engineer.
300
90000
300
Supply and installation of 4M single Arm Bend Outdoor Antique Tradition Decorative Street Lamp Post ISI Certified with extended arms for flag /banners including wiring, electrical control panells , lighting 70 W , Base plate , Pole Foundation in M10 Grade (1:3:6) 10mm Crushed Aggregate 510 x 510 510 mm Anchor block size , Excavation , Soling below Anchor Block and all necessary fixtures , hooks complete job as approved by Engineer-In-Charge.
20
700000
35000
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
50
575000
11500
Supply and Filling of Granular Sub Base Material including digging carrying lorry ramming,watering,dressing and consolidation in layer including all leads ift and carriage for avg leads up to 07 kmby MT,etc complete finishing work to be measured.
292.5
453375
1550
Providing and laying laying of M.S Pipe 150mm dia for crossing at required spot including digging trench, re-filling at top and making the road trafficable includind cement concrete inlet 1:3:6(1cement:3 coarse sand: 6 graded crushed stone agg 20mm nominal size). including all carriage from available source to site of work
12
360000
30000
Supply / Filling of WBM 3rd 75 mm thick with specified stone aggre.stone screening & binding material including screening sorting spreading to template and consolidation with PRR of 8 -10 tone capacity etc incl cost of sub base with stone aggre.53-20.4mm size includingb screening 11.20mm size @ 0.15/sqm and binding materilal @ 0.08/sqm including all carriage material bu MT and stacking of required size and range at site complete.
73.13
138947
1900
Prividing and Laying tack coat using hot straight run bitumen of grade 80 - 100 including heating the bitumen spraying the bitumen with mechnically operated spray unit fitted on bitumen boiler cleaning and preparing the existing road as per specification on 0.75 kg/ sqm including the cost of all involved material complete job .
975
107250
110
P / Applying priming coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and and spraying primer @ 0.9-1.2 kg/sqm using mechnically means as per tech specification clause 502.
975
156000
160
Providing and Laying bituminious macadam with plant 50 mm thick compacted thicness in accordance with most specified to specified line grade and corss section aggre.grading to min.size 35 % 20mm 45 % 10 mm fine aggre.with binder content of the mix 3.5 % by weight to total mix including all cost of material involved T & P lab.Octeria taxes and testing charge during excavation including cost pf bitumen and consolidation with PRR.including 0.5% for surface correction /holes/undulation complete job.
48.75
355875
7300
Providing and Laying semi dense bituminous concrete of 25 mm thick on macademized surface with specified grade crushed aggre.as per most specification ( aggre 1 mm 15 % ,10 mm 55 % fine aggre.28 % cement 2 % mixed with binder @ 5.5 % Tar in Hot mix plant laid with power finish with required level acheiving the desired density consolidation with PRR including all carriage / cost of Tar and Seal coat with binder qty of 0.60 kg/sqm complete job.
24.38
219420
9000
Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
60
72000
1200
Providing and fixing carbon steel Rectangular Solar road Stud (Cat-Eye) Solar Panel: Monocrystalline Silicon 2.5V/1300 mah Power: 0.72 W, LED: 6Pc. , Waterproof: IP68, Colour Models: Red Flashing
80
320000
4000
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
320
352000
1100
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
750
210000
280
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
13500
3510000
260
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
1100
286000
260
2 X 6 Sqmm + 1 x 6 sqmm
500
140000
280
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
1 or 2 Module (75 mmX75 mm)
45
13500
300
3 Module (100mmX75mm)
55
17050
310
4 Module (125mmX75mm)
20
6400
320
6 Module (200mmX75mm)
56
22400
400
8 Module (125 mmX125 mm)
20
8600
430
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
280
36400
130
3 pin 5/6 A socket outlet
100
18000
180
15/16 A switch
70
14000
200
6 pin 15/16 A socket outlet
60
15000
250
TV antenna socket outlet
15
3900
260
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
16
1760
110
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
16
1920
120
supplying and fixing following way, single pole and neutral,
sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way , Double door
6
15000
2500
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)8 way (4 + 24), Double door
3
17400
5800
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
.Single pole
110
35200
320
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
21
630
30
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps
5
2000
400
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps
8
9600
1200
Providing and fixing danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
5
1600
320
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
3
24000
8000
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
3
48900
16300
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
10
20000
2000
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
10
6000
600
Supply and laying of following size of 1.1kv grade FR multicore copper conductor XLPE insulated and PVC sheathed armoured Power cable as per IS : 7098:1988 (Part - I) with upto date amendments.
3.5 core, 95 Sq.mm.
50
55000
1100
4.0 core, 16 Sq.mm.
150
165000
1100
4.0 core, 10 Sq.mm.
50
55000
1100
3.0 core, 6 Sq.mm.
50
40000
800
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kV grade as required. 3.5 core, 95 Sq.mm.
40
44000
1100
4.0 core, 10 Sq.mm.
30
18900
630
4 X 16 sq. mm (28mm)
30
21900
730
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed
conduit as required. 32mm
1270
292100
230
25mm
920
202400
220
Providing & Fixing of IP40 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Back lit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency 85% and in compliance to IEC standards. System Lumen efficacy of ≥ 120 lm / watt, THD 10 % ,p.f.≥0.95, CRI 80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted.
15W CEILING MOUNTED LED LIGHT
50
160000
3200
12W CEILING MOUNTED LED LIGHT
150
300000
2000
10W CEILING MOUNTED LED LIGHT
50
85000
1700
10W Foot light
50
27500
550
10W LED MIRROR LIGHTS
20
36000
1800
LED COVE LIGHTING 6 W / MTR
140
56000
400
CEILING JUNCTION BOX
150
82500
550
S/F of 1200mm sweep 3 blade energy efficient 5 star ceiling fan complete with assembling of blade down rod shackle insulator canopy etc including 2 module stepped type modular fan regulator.
18
61200
3400
Supply installation/testing and commissioning of wall mounted fan having sweep 40mm 3 blade with completeaccessories
10
40000
4000
S/F of exhaust fan shutter type of sweep 250mm in the existing opening, including making the hole to suit the above fan, making good the damage as required.
35
112000
3200
Supply installation/testing and commissioning of LED flood light 50W with complete accessories
8
36000
4500
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
500
75000
150
Supplying and fixing of following sizes of conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.25 mm
420
92400
220
Supply and laying of Cat 6 data cable existing conduit complete as required.
200
24000
120
SITC of 250 A Bus bar Chamber with Incomer MCCB and Circuit breakers having the following specification. TPN Aluminum Bus bar Size: 40mm x 10mm with color coded PVC Sleeves. (Take Bus-Bar Density:0.8A/mm2 ) Incomer 200 Amp 4P ,35KA MCCB: -----------------01 No. Outgoing: DP 63Amp 4P MCB TPN -----05 No
Voltage Amps frequency Digital meter 1 set
CT Ammeter 200 Amps 1 set
RY B Indication light 1 set
2
320000
160000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements