Ladakh Autonomous Hill Development Council Tender
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Costs
EMD
₹ 14,88,580Document Cost
₹ 7,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_LAHDC_13695_1Tender No
Fresh E-Tender11 of TDA Kargil 2024-25Tender Authority
Ladakh Autonomous Hill Development Council ViewPurchaser Address
-Website
http://tenders.ladakh.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand) Retaining wall
250.56
1252800
5000
Reinforced Cement Concrete cement concrete in lintels, beams and bressumers including setting in cement mortar 1:3 (1 cement : 3 coarse
sand), cost of required centering, shuttering and curing but excluding the cost of reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) .
64.76
686456
10600
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.
28.08
7300
260
Centering and shuttering including strutting, propping etc.lintles, beams etc.
72
36000
500
Columns, pillars, piers, abutments, posts and struts.
20.47
13305
650
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
7770.6
932472
120
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20
mm nominal size)
93.75
937500
10000
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
640
160000
250
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
1600
192000
120
Providing and laying pathway (yamangs) including binding material such as cement, etc all complete job as per design.
407.48
1018700
2500
Providing and laying cobbled tiles at pathway including cost of sand/cement all complete job, as per design.
407.48
1426180
3500
Providing and laying red gravel surface including cost of sand, cement all complete job, as per design.
407.48
896456
2200
Providing and fixing interlock tiles 50 mm thick for parking lot all complete job as per direction of Engineer in charge. As per drawing.
1682
2775300
1650
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
106
196100
1850
Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing off by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)
1150
69000
60
Mixing earth and sludge or manure in proportion specified or directed by officer in charge.
1150
42630
37.07
Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.)
1150
862500
750
Providing and Planting willow trees including watering untill initial growth of plant all complete job.
25
3750
150
Providing and fixing M.S tree guard 45 cm square in plan, height 1.20 meter above ground level and 0.40 meter below ground level. The vertical members shall consist of four nos. angle iron of size 25x25x3 mm, 1.6 m long, one at each corner and 8 nos flat iron of size 25x3 mm, 1.2 m long. The vertical members shall be welded to 4 nos. 25x6 mm M.S flats placed horizontally around the vertical members of the cage. One name plate of 1 mm thick M.S sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD /PWD/any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two more coats of synthetic enamel paint of approved brand and or more coats of synthetic enamel paint of approved brand and manufacture over a coat of primer complete
16
24000
1500
Providing and fixing benches of which is made up of iron and wooden sitting (45" L X 12" W X 18"+18" H).
20
90000
4500
Providing and placing trash cans at specific points as per design of 100 ltrs capactiy
16
32000
2000
Providing and fixing ISI markded street light decorative out door lighting pole made up of mild steel dual arm all complete job.
36
720000
20000
Providing and laying ISI Marked Earthern Condute including adhesive/nut bolts what ever required to connect the condute all complete job.
250
8750
35
Providing, fixing and Laying ISI marked Wire pairs of red and black colour or any other colour of area 1.5sqmm dia, all complete job.
260
5200
20
Provding and fixing ISI marked 60mm dia water supply pipe system all complete job.
482
723000
1500
Provding and fixing ISI markded 40mm dia water supply GI pipe system all complete job.
368
441600
1200
Provding and fixing ISI marked 15mm dia water supply GI pipe system all complete job.
680
680000
1000
DRY CAFTEREIA:- Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 25 meter beyond 1 m from cutting edge.
381
167640
440
Filling available excavated earth (incl. rock) in trenches plinth, sides of foundationetc in layer soil exceeding 20cm in depth consolidation each deposited layer by ramming and watering, lead upto 50cm and lift upto 1.5 mtr. @ 50% of earth work.
190.5
38100
200
Dumping of stone including cost of stone (on horizontal)
254
101600
400
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
25.4
113030
4450
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
200.3
1502250
7500
Reinforcement for RCC works
19215.98
2305917
120
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)
87.45
419760
4800
Providing and laying autoclaved aerated cement blocks masonry with150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately)
42.56
312816
7350
Providing and fixing 12mm thick clear toughened glass, openable shutters, door shutter etc. with necessary fittings for fins/spider joints, clips etc with holes including joining of glass/frames with suitable rubber/silicon Gasket to make the structure water proof all complete job as per instruction of engineer Incharge.
508
2235200
4400
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Area of Hemisphere (Geodesic Dome)
25400
3810000
150
Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
322.3
58014
180
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: 11.33.1 Makrana White Second quality
113.04
508680
4500
Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 11.43.1 20 mm thick
56.2
134880
2400
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete
400.65
104169
260
Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls. Under 20 cm wide
60
15000
250
Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete. 12.47.1 Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm
56.5
101700
1800
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Asian paints/Nerolac paint/Dulux paint (Shade as per instruction of Engineer Incharge)
378.82
60611
160
MDF wall panelling, MDF wall Panelling with upholestry finish
15
16500
1100
12 mm ply panelling with veneer polished finish as per instruction of engineer incharge
15
15750
1050
Wooden Battens, 35mm x 25mm wooden battens polished and finished
10
11500
1150
Supplying, installing and fixing ofLED back lit mirror each 5 sft area with shape and design as per instruction of engineer incharge
8
16000
2000
Frames and trusses Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood of
1.1
94600
86000
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood 35 mm thick
21
52500
2500
Supplying fixing and commissioning of Brass Handle with door lock system including key loading , all complete job as per instruction of engineer incharge
20
40000
2000
French spirit polishing, Two or more coats on new works including a coat of wood filler.
40
12800
320
Brass handle with plate of size minimum 200mm long and handle width of minimum 150mm dia
18
16200
900
Antique type brass tower bolt of minimum 200 mm tength as per approved by engineer incharge
24
12000
500
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. including DGU with 5mm thk glass panes and rubber gasket Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)
30
288000
9600
Finishing walls with textured interior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm
44
19800
450
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
160
99200
620
Sanitary Installations for Construction of Dry Cafeteria: Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300 x 600
42.68
44814
1050
Providing and laying Ceramic glazed floor tiles 600x600 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc complete. In all colours, shades, White, Ivory, Fume Red Brown
17.5
19250
1100
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. Internal work concealed fixing with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 25 to 32mm including all type of neccessary fixture.
100
55000
550
Insulation of PP-R Pipe by way of providing and fixing Kflex heat wire , Glass wool Rubber, chicken mesh, aluminium foil, and tape insulation heat wire 10 Watt with auto cut system complete job. (approved brand)
244
683200
2800
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser po (approved brand)ints of approved make conforming to IS : 8931
50
26000
520
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Single socketed pipes 75-110mm(approved brand)
46
16100
350
Providing insulation for sanitary PVC Pipe /3" dia fittings by way of Rock Wool Chiken Mesh/Black Polythene/28/26 gauge aluminium sheet with necessary screws, labour charge to exposed pipes as per direction of engineer incharge. With auto cut system(approved brand)
61
98820
1620
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5° 75 -110mm (approved brand)
100
35000
350
Providing and fixing one piece construction white WC vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: Range of two squatting plates with 5 liter P.V.C. automatic flushing cistern. (approved brand)
3
36000
12000
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (approved brand)
10
45000
4500
Providing and fixing white vitreous china pedestal for wash basin including wash basin completely recessed at the back for the reception of pipes and fittings.
4
14000
3500
Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 20 mm nominal bore
60
7200
120
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm
2
1100
550
Providing and fixing Exhaush fan of approved make and fitting all complete
6
15000
2500
Providing and fixing Gyser of approved quality and make of 25 litres capacity.
10
150000
15000
PROVIDING AND FIXing Health Fauset
8
6000
750
Providing and fixing toilet paper holder C.P. brass
5
2250
450
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.
4
3800
950
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
4
4600
1150
Providing and fixing 100 mm sand cast iron grating for gully trap.
4
200
50
Providing and fixing 100 mm sand cast iron grating for gully trap.
4
320
80
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
4
600
150
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
4
2480
620
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (approved brand)
6
27000
4500
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately including insulation of water tank
2000
30000
15
Supply, installation and commissioning on Turnkey basisfor complete high side and low side works of 10HP Heatpump having 10.3 KW input power and 38 KW outputpower with inbuilt tube in tube heat exchange. The pumpshould have LCD display panel with inbuilt diagnostic andtroubleshooting information along with control paneldesigned for hot water out temperature not less than 55-60⁰ C having protections such as No incoming water flow,high discharge pressure cut off (Manual reset only), low pressure cut off, water tank temperature, sensor failure fusefailure display, controller communication error, daily usage programming capability, communication port to connect to Laptop(RS485), password lock , error memory. Electrical protection such as under voltage/Low voltage protection,Single phase/phase missing & Reversal protection, Compressor Overload Protector, MCB fuse as standard and digital Energy meter. Refrigerant environment friendlyR410A. The pump should have inbuilt cycle for defrosting icing accrue on evaporator. Provided with MS pressurised hot water storage/mixing tank, capacity 6000 Ltr ( 6 mm thick shell & 8 mm thick dish end) duly two coat epoxy coating from inside with Man hole , SS 304- G Socket MS Channel stand (Size 100mm X 50mm ), Air Vent valve, Safety Valve, Temperature Gauge, 100 mm thick rockwool & 24-G thick aluminum sheet cladding, 36 KW Electrical Heating Elements with automatic thermostat control along with two Hot water circulation pumps (one standby) with complete internal plumbing/valves/pressure gauges/Y stainer /pipe fitting etc. Note: The system should capable to operate air ambient temperature of -10 degC to 40 degC
1
850000
850000
ELECTRICAL : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A
20
50000
2500
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a)2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
300
36000
120
b)2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
300
45000
150
c)2 X 4 sq. mm + 1 X 4 sq. mm earth wire
200
36000
180
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Service Line 3 x 2.5 sq. mm
200
50000
250
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
200
8000
40
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm
200
32880
164.4
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 40mm
200
38644
193.22
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required a) 5/6 A switch
20
1746
87.3
b) 15/16 A switch
20
2508
125.43
c) 5 pin 5/6 A socket outlet
20
2068
103.4
d) 5 pin 15/16 A socket outlet
20
3340
167
e) Telephone socket outlet
2
251
125.5
f) TV antenna socket outlet
2
250
125
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
14
6300
450
Installation ,Testing, Commissioning of wall bracke led lamp holder with necessery screws all complete job.
20
2440
122
Installation ,Testing, Commissioning of wall bracket /ceiling fittings / recess mounted 20w/ , surface mounted 15w, ceiling rose if required, of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. Surface recessed Mounted 15 W LED BULB
20
9525
476.28
Surface Mounted LED bulb 8 watt
20
4760
238
Ceiling Fan all complete job
6
12000
2000
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
2
254
127
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
4
8000
2000
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
4
702
175.5
Wiring for group controlled (looped) light point/fan point/ exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B
2
1200
600
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
4
880
220
Double pole
4
2200
550
Triple pole
2
1700
850
Providing and fixing Painted metalli MCB Box 16 way all complete job.
4
12000
3000
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A
1
350
350
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
2400
1200
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
200
200
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
1
4500
4500
Providing and fixing Circuit box having electrical panel, reading meters and should be properly grounded to ensure safety. All grounding conductors should be connected to a ground bus bar within the panel. Bonding connections should also be made to ensure electrical continuity and safety.
1
3000
3000
Providing and fixing solar panel to generate 90 kw power on roof top including cost of power on surface including cost of Solar Panels, inverters, Mounting structures, solar charge controller, Batteries, wiring and cables, circuit breakers, combiner box, DC Disconnect switch, AC disconnect switch, Metering equipment, Surge protection Devices, Grounding equipment, Monitoring system, Voltage Regulators, remote monitoring and control system, lightning protection, enclosures and weatherproofing, angle irons, hooks, nuts and bolts and installation etc all complete job as per direction of site engineer @ 29rs/watt
50
250000
5000
Solar Street Light Outdoor,100W Outdoor Dusk to Dawn Lamp 98 LEDs 7000K Motion Sensor Light all complete Job.
20
240000
12000
WET CAFETERIA: Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 25 meter beyond 1 m from cutting edge..
735.9
323796
440
Filling available excavated earth (incl. rock) in trenches plinth, sides of foundationetc in layer soil exceeding 20cm in depth consolidation each deposited layer by ramming and watering, lead upto 50cm and lift upto 1.5 mtr.
102.2
20440
200
Dumping of stone including cost of stone (on horizontal)
490.63
196252
400
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
25.4
113030
4450
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
163.92
1229400
7500
Reinforcement for RCC works @ 130Kg / Cum of RCC works
21309.29
2557114
120
Coursed Rubble Masonry with hard stone in foundation and plinth and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse Sand)
52.39
314340
6000
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)
87.23
418704
4800
Providing and laying autoclaved aerated cement blocks masonry with150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately)
124.82
917427
7350
Providing and fixing 12mm thick clear toughened glass, openable shutters, door shutter etc. with necessary fittings for fins/spider joints, clips etc with holes including joining of glass/frames with suitable rubber/silicon Gasket to make the structure water proof all complete job as per instruction of engineer Incharge.
981
4316400
4400
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Area of Hemisphere (Geodesic Dome)
49062.5
7359375
150
Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
288.04
51847
180
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Makrana White Second quality
499.5
2247750
4500
Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 20 mm thick
50
120000
2400
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete
525.17
136544
260
Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls. Under 20 cm wide
11.96
2990
250
Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete. 12.47.1 Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm
110
198000
1800
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.13.94.1 New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. Asian paints/Nerolac paint/Dulux paint (Shade as per instruction of Engineer Incharge)
1850
296000
160
MDF wall panelling, MDF wall Panelling with upholestry finish
20
22000
1100
12 mm ply panelling with veneer polished finish as per instruction of engineer incharge
20
21000
1050
Wooden Battens, 35mm x 25mm wooden battens polished and finished
20
23000
1150
Supplying, installing and fixing ofLED back lit mirror each 5 sft area with shape and design as per instruction of engineer incharge
8
16000
2000
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood
1.3
111800
86000
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood 35 mm thick
31
77500
2500
Supplying fixing and commissioning of Brass Handle with door lock system including key loading , all complete job as per instruction of engineer incharge
26
52000
2000
French spirit polish two or more coats.
60
19200
320
Brass handle with plate of size minimum 200mm long and handle width of minimum 150mm dia
26
23400
900
Antique type brass tower bolt of minimum 200 mm tength as per approved by engineer incharge
39
19500
500
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. including DGU with 5mm thk glass panes and rubber gasket Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.)
44.6
428160
9600
Finishing walls with textured interior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm
110
49500
450
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
240
148800
620
Sanitary Installations for Construction of Wet Cafeteria Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300 x 600
166.54
174867
1050
Providing and laying Ceramic glazed floor tiles 600x600 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc complete. In all colours, shades, White, Ivory, Fume Red Brown
28.8
31680
1100
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. Internal work concealed fixing with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.25-32 including all fixture
300
165000
550
Insulation of PP-R Pipe by way of providing and fixing Kflex heat wire , Glass wool Rubber, chicken mesh, aluminium foil, and tape insulation heat wire 10 Watt with auto cut system complete job.
244
683200
2800
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
100
52000
520
providing and fixing on wall face un plasicsized rigid PVC rain water pipes etc 75-110mm including all fixtures
200
70000
350
Providing insulation for sanitary PVC Pipe /3" dia fittings by way of Rock Wool Chiken Mesh/Black Polythene/28/26 gauge aluminium sheet with necessary screws, labour charge to exposed pipes as per direction of engineer incharge. With auto cut system
122
197640
1620
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5° 75MM
100
35000
350
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5° 110MM
100
38000
380
Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and in C.P brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: Range of two squatting plates with 5 liter P.V.C. automatic flushing cistern.
8
96000
12000
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixe
10
45000
4500
Providing and fixing white vitreous china pedestal for wash basin including wash basin completely recessed at the back for the reception of pipes and fittings.
7
24500
3500
Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 20 mm nominal bore
120
14400
120
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gm
2
1100
550
Providing and fixing Exhaush fan of approved make and fitting all complete
10
25000
2500
Providing and fixing Gyser of approved quality and make of 25 litres capacity.
10
150000
15000
PROVIDING AND FIXing Health Fauset
8
6000
750
Providing and fixing toilet paper holder C.P. brass
8
3600
450
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.
9
8550
950
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
9
10350
1150
Providing and fixing 100 mm sand cast iron grating for gully trap.
9
450
50
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
9
1350
150
Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
9
5580
620
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.
10
45000
4500
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately including insulation of water tank
2000
30000
15
Supply, installation and commissioning on Turnkey basisfor complete high side and low side works of 10HP Heatpump having 10.3 KW input power and 38 KW outputpower with inbuilt tube in tube heat exchange. The pumpshould have LCD display panel with inbuilt diagnostic andtroubleshooting information along with control paneldesigned for hot water out temperature not less than 55-60⁰ C having protections such as No incoming water flow,high discharge pressure cut off (Manual reset only), low pressure cut off, water tank temperature, sensor failure fusefailure display, controller communication error, daily usage programming capability, communication port to connect to Laptop(RS485), password lock , error memory. Electrical protection such as under voltage/Low voltage protection,Single phase/phase missing & Reversal protection, Compressor Overload Protector, MCB fuse as standard and digital Energy meter. Refrigerant environment friendlyR410A. The pump should have inbuilt cycle for defrosting icing accrue on evaporator. Provided with MS pressurised hot water storage/mixing tank, capacity 6000 Ltr ( 6 mm thick shell & 8 mm thick dish end) duly two coat epoxy coating from inside with Man hole , SS 304- G Socket MS Channel stand (Size 100mm X 50mm ), Air Vent valve, Safety Valve, Temperature Gauge, 100 mm thick rockwool & 24-G thick aluminum sheet cladding, 36 KW Electrical Heating Elements with automatic thermostat control along with two Hot water circulation pumps (one standby) with complete internal plumbing/valves/pressure gauges/Y stainer /pipe fitting etc. Note: The system should capable to operate air ambient temperature of -10 degC to 40 degC
1
850000
850000
ELECTRICAL FOR WET CAFETERIA: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A .
40
100000
2500
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
300
36000
120
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
300
45000
150
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
300
54000
180
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Service Line 3 x 2.5 sq. mm
200
50000
250
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
200
8000
40
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm
120
19728
164.4
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 40mm
30
5796
193.22
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6 A switch
40
3492
87.3
15/16 A switch
20
2508
125.43
5 pin 5/6 A socket outlet
40
4136
103.4
5 pin 15/16 A socket outlet
20
3340
167
Telephone socket outlet
2
251
125.5
TV antenna socket outlet
2
250
125
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
20
9000
450
Installation ,Testing, Commissioning of wall bracke led lamp holder with necessery screws all complete job.
40
4880
122
Installation ,Testing, Commissioning of wall bracket /ceiling fittings / recess mounted 20w/ , surface mounted 15w, ceiling rose if required, of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. Surface recessed Mounted 15 W LED BULB
40
19051
476.28
Surface Mounted LED bulb 8 watt
40
9520
238
Ceiling Fan all complete job
10
20000
2000
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
2
254
127
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
4
8000
2000
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
4
702
175.5
Wiring for group controlled (looped) light point/fan point/ exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B
2
1200
600
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
10
2200
220
Double pole
10
5500
550
Triple pole
2
1700
850
Providing and fixing Painted metalli MCB Box 16 way all complete job.
4
12000
3000
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A
1
350
350
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as
required.
2
2400
1200
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
200
200
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia
including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
1
4500
4500
Providing and fixing Circuit box having electrical panel, reading meters and should be properly grounded to ensure safety. All grounding conductors should be connected to a ground bus bar within the panel. Bonding connections should also be made to ensure electrical continuity and safety.
1
3000
3000
Providing and fixing solar panel to generate 90 kw power on roof top including cost of power on surface including cost of Solar Panels, inverters, Mounting structures, solar charge controller, Batteries, wiring and cables, circuit breakers, combiner box, DC Disconnect switch, AC disconnect switch, Metering equipment, Surge protection Devices, Grounding equipment, Monitoring system, Voltage Regulators, remote monitoring and control system, lightning protection, enclosures and weatherproofing, angle irons, hooks, nuts and bolts and installation etc all complete job as per direction of site engineer @ 29rs/watt
50
250000
5000
Solar Street Light Outdoor,100W Outdoor Dusk to Dawn Lamp 98 LEDs 7000K Motion Sensor Light all complete Job.
20
240000
12000
TOILET BLOCK: Excavation work in excavation by manual means in foundation trenches, drains, pipes and cables etc. (Not exceeding 1.5m in width or 10sqm on plane) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus soils and directed, within a lead of 25mtr. all kinds of soil.
28.2
12408
440
Filling available excavated earth (incl. rock) in trenches plinth, sides of foundationetc in layer soil exceeding 20cm in depth consolidation each deposited layer by ramming and watering, lead upto 50cm and
lift upto 1.5 mtr.
28.2
5640
200
Dumping of stone including cost of stone (on
horizontal)
4
1600
400
Random rubble masonry with hard stone from qurry in foundation and plinth level with cement concrete 1:6:12 at plinth with 1:6 mix
19.2
92160
4800
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) (crushed)
3.4
22100
6500
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
37.6
357200
9500
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-
Mechanically treated bars.)
4523.4
542808
120
Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footing bases of column
91.4
23764
260
Columns, pillars, piers, abutments, posts and streets
53.6
21440
400
Lintel beams, plinth beams, griders, bressument and cantiliver
3.2
960
300
Suspended floors etc
43
19350
450
Providing and fixing of upto floor five level pre-cast solid blocks of 1:3:6 in 1:6 cement mortor including all caaariages.
22.2
215340
9700
Providing wood work in frames of doors,
windows, clerestory windows and othwr frames, wrought first class kail wood.
0.6
51600
86000
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
3.4
153
45
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:
Two or more coats on new work.
3.4
544
160
Providing and fixing ISI marked flush door
shutters
27.4
30140
1100
15 mm thick cement plaster in cement in cement mortar 1:4 (1 cement:4 fine sand)
184
58880
320
Finishing walls with water proofing paints of
required shades new work or two or more coats applied @3.84kg/10sqm.
80.2
12832
160
Providing and applaying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.
103.6
18648
180
Distempering with dry distemper of approved brand and manafacture two or more coats and of required shades on new work, over and including priming coats of whitening to give an even shade.
103.6
7770
75
Providing & Fixing finished brass hanging type floor door stopper with necessary screws etc complete. 10mm
8
2000
250
Providing & Fixing finished brass hanging type floor windowr stopper with necessary screws etc complete. 10mm
16
2400
150
Providing & Fixing finished brass hanging type floor Door stopper with necessary screws etc complete.
8
1280
160
P/F bright finished door bolts with nuts and necessary screws etc D=4no 125mm
16
3200
200
P/F bright finished door bolts with nuts and necessary screws etc W=4no 100mm
16
2880
180
SEPTIC TANK: Earthwork in excavation by manual means in foundation trenches, drains, pipes and cables etc. (Not exceeding 1.5m in width or 10sqm on plane) including dressing of sides and ramming of bottoms, lift upto 1.5m @ORDINARY ROCK=80%
315
138600
440
Earthwork in excavation by manual means in foundation trenches, drains, pipes and cables etc. (Not exceeding 1.5m in width or 10sqm on plane) including dressing of sides and ramming of bottoms, lift upto 1.5m HARD ROCK B.P=20%
78.8
82740
1050
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal
size) (crushed)
7.4
39960
5400
Random rubble masonry with hard stone from qurry in foundation and plinth level with cement concrete 1:6:12 at plinth with 1:6 mix
38
182400
4800
Dry random rubble masonary in foundation & plinth using quarry stone with bond stone
28.6
100100
3500
P/L in position specific grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level (1:1.5:3) stone agg. 20mm n/size.
11
82500
7500
Reinforcement for RCC work including straightening cutting bending placing in position & bending all complete.
1552
186240
120
Centering and shuttering Suspended floors,roofs, landing etc
72.8
29120
400
Centering and shuttering Edge of slabs and breaks in floor and walls
51.2
10752
210
Cement concrete flooring 1:2:4 stone agg. finished
36.4
16380
450
15mm cement plaster on rough side of single wall of mix 1:4 (1cement:4course sand)
10.4
3640
350
P/F 1st quality ceramic glazed tiles conforming to IS 13753 of min thickness 5mm of approved make like NITCO, ORIENT, SONMANY KAJARIA, or
equavelent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer. FLOOR TILES
6
6300
1050
P/F 1st quality ceramic glazed tiles conforming to IS 13753 of min thickness 5mm of approved make like NITCO, ORIENT, SONMANY KAJARIA, or
equavelent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer. WALL TILES
69
75900
1100
P/F white vitreous china pedestal type water closet ( European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C.I / M.S brackets 40mm bend diameter flush bent, muncipal design complete including painting of fittings and brackets, cutting making good the walls and floors whenever required.
W.C pan with ISI marked white solid plastic
seat and lid.
8
64000
8000
White vitreous china wash basin size 660 x 460 mm with single 15mm C.P brass pillar traps with elbow operated levers ISI marked.
4
20000
5000
P/F of mirrors of superior glass (of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular
1500 x 450
4
4800
1200
Providing and fixing soil waste & vent pipe
(pvc PIPE) 100mm
60
12000
200
Providing and fixing soil waste & vent pipe
(pvc PIPE) 75mm
30
4500
150
P/F the joints with span for cement slurry &
cement mortar (1:2) in PVC pipe. 100mm
8
960
120
P/F the joints with span for cement slurry &
cement mortar (1:2) in PVC pipe. 75mm
8
800
100
P/F plain bend of required degree PVC 100mm
8
1280
160
P/F plain bend of required degree PVC 75mm
8
1040
130
P/F double equal plain junction of required degree 100x100mm
8
1440
180
P/F double equal plain junction of required degree 75x75mm
8
1280
160
P/F PPR pipes complete with PPR fittings
and clamps, including cutting and making good the walls etc. Internal complete 15mm icluding all accessories
120
33600
280
P/F PPR pipes complete with PPR fittings
and clamps, including cutting and making good the walls etc. Internal complete 20mm
120
38400
320
P/F PPR pipes complete with PPR fittings
and clamps, including cutting and making good the walls etc. Internal complete 32mm
120
40800
340
P/F CP brass toilet paper holder including
cost of wodden,PVC,play etc.
8
3200
400
P/F CP brass soap dish with bracket etc.
4
1640
410
P/F CP brass towel rail with bracket etc.
4
3000
750
P/F CP brass wall mixer 15mm standard palude.
4
16000
4000
HANDICRAFT SHOP: Excavation work in excavation by manual means in foundation trenches, drains, pipes and cables etc. (Not exceeding 1.5m in width or 10sqm on plane) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus soils and directed, within a lead of 25mtr. all kinds of soil.
31.84
14009
440
Filling available excavated earth (excluding rock) in trenches plinth, sides of foundationetc in layer soil exceeding 20cm in depth consolidation each deposited layer by ramming and watering, lead upto 50cm and lift upto 1.5 mtr.
12.74
2548
200
Dumping of stone excluding cost of stone (on horizontal)
9.04
4068
450
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) (crushed)
9.04
61472
6800
Random rubble masonary with hard stone from quarry in foundation and plinth level with cement concrete 1:6:12 at plinth with 1:6 mix
26.04
124992
4800
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
22.37
212515
9500
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically treated bars.)
2700
324000
120
Centering and shuttering including strutting, propping etc. and removal of form for:
Foundation, footing bases of column
34.03
8507
250
Centering and shuttering including strutting, propping etc.PLINTH & GROUND FLOOR BEAM
38.48
15392
400
Centering and shuttering including strutting, propping etc.Suspended floors, roofs, landing,
balconies & acess platform
62.73
28228
450
Providing and fixing upto floor five level precast cement concrete solid block including hoisting and setting in position with cement mortor 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete: 1:3:6 ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size
28.36
275092
9700
Providing wood work in frames of doors, windows, clerestory windows and othwr frames, wrought first class kail wood.
0.29
24940
86000
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
6.6
16500
2500
Providing and fixing ISI marked flush
door shutters 25 mm thick pre-laminated glush door shutter bothside decorative.
4.55
5005
1100
15 mm thick cement plaster in cement in cement mortar 1:4 (1 cement:4 fine sand)
131.6
39480
300
ROUGH CAST PLASTER Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. 13.22.1 Ordinary cement finish using ordinary cement
171
73530
430
Finishing walls with water proofing paints of required shades new work or two or more coats applied @3.84kg/10sqm.
171
20520
120
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
22.3
4014
180
Distempering with dry distemper of approved brand and manafacture two or more coats and of required shades on new work, over and including priming coats of whitening to give an even shade.
22.3
2453
110
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard
and soft wood)
8.19
532
65
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 25mm thick with 12.5 mm nominal size stone aggregate.
49.07
22081
450
BOUNDARY WALL: Earth work in excavation by manual means in foundation trenches, drains, pipes and cables etc. (Not exceeding 1.5m in width or 10sqm on plane) including dressing of sides and ramming of bottoms, lift upto1.5m including getting out the excavated soil and disposal of surplus soils and directed, within a lead of 25mtr. all kinds of sail.
181.12
79692
440
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by raming and watering, lead up to 50 m and lift upto 1.5 m.
72.45
14490
200
Dumping of stone including cost of stone (on horizontal)
Wall:-
33.96
15282
450
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (crushed)
16.98
93390
5500
Random rubble masonry with hard from qurry in foundation and plinth level with cement concrete 1:6:12 at plinth with 1:6 mix
288.66
1443300
5000
Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) crushed
407.5
4278750
10500
Painting for 2 or more coats
2676
669000
250
Built up section in truss, frames etc "Grill above boundary wall"
8000
1200000
150
Cement plaster (In fine sand) 12mm cement plaster of mix 1:4
2676
856320
320
Carraige a) Stone…………………10Kms
289
274550
950
GABION WALL: Excavation work in excavation by mechanical means in foundation trenches, drains, pipes and cables etc. (Not exceeding 1.5m in width or 10sqm on plane) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus soils and directed, within a lead of 25mtr. all kinds of soil.
79.24
19810
250
Dumping of stone excluding cost of stone (on horizontal)
39.62
17829
450
Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ±2%), Zinic+10% Al alloy+PVC coated, Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing, all complete as per directions of Engineer-in-charg
679.2
4075200
6000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements