Ladakh Autonomous Hill Development Council Tender

Dumping and filling of stone in horizontal level including cost of stones.

Providing and laying in position cement conrete of specified grade excluding the cost of centering and shuttering all works up to plinth level 1:4:8 (1Cement: 4 Coarse sand: 8 Graded stone agg. 40 mm nominal size.

Random rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 Cement: 6 Coarse sand : 12 graded stone aggregate 20 mm nominal size) at plinth level with cement mortar 1:6 ( 1 Cement: 6 Coarse sand)

reinforcement cement concrete work in walls (any thickness ) incl. attached pilaster, buttresses plinth and string courses fillets, columns, pillars, piers, abutments, postsans, sturts etc up to floor five level excl. cost of centering, shuttering finishing and reinforcement 1:1.5:3 ( 1 Cement : 1.5 Coarse sand : 3 graded crushed stone aggregate 20 mm nominal size)

providing and fixing up to floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 Cement: 3 Coarse sand) cost of required centering, shuttering and complete 1:3:6 (1 Cement: 3 Coarse sand : 6 graded stone agg. 20 mm nominal size)

Providing wood work in frames of doors, windows clerestory windows and other frames, wraught framed and fixed in position with holds fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash festeners shall be paid for separetely. Second class Kail wood.

Centering and shuttering incl. strutting, propping etc and removal of form for : lintels, beams, plinth beam , girders bressumers and centilevers.

Reinforcement for RCC work including striaghtening, cutting and binding, placing in position and branding all complete thermo mechanically treated bars. (TMT)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all works up to plinth level ( 1:3:6) 1 Cement: 3 Corase sand: 6 graded stone aggregate 20 mm nominal size.

Providing and laying cement conrete flooring 1:2:4 ( 1cement: 2 Coarse sand: 4 Graded stone aggregate ) finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc complete 50 mm thick with 20 mm nominal size stone aggregate (crushed)

ProvidingSun dried bricks masanry laid in mud mortor including cost of brick

filling of stone hand packet up to plinth level including cost of stone.

20 mm cement plaster finished with a floating coat of neat cement of mix 1:4 ( 1Cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 2 mm of approved brand and manufacuture over the plastered wall surface to prepare the surface even and smooth complete.

Distemper with oil bound washable distemper of approved brand and manufacture to given on even shade new work two or more coat over and including priming coat with cement primer.

Structure steel work welded in built up section , trusses and framed work, incl. cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G.S sheet roofing incl. vertical / curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter with bitumen and G.I limper washers or with G.I limpet washers filled with white lead and incl. a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete ( up to any pitch in horizontal / vertical or curved surface) excl. the cost of purlins, rafters and trusses and incl. cutting to size and shape whereever required 0.63 mm thick with Zinc coating not less than 275 gm/m2

Providing and fixing glazed shutters for doors and windows and clerestory window using 10 Kg/sqm 4 mm thick float glasss paints including ISI marked MS pressed butt hangs bright finished for required size with necessary screws ( II class kail wood )

Supplying and fixing rolling shutters of approved make made of required size M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on especially designed pipe shaft with brackets side guies and arrangements of inside and outside locking with push and pull operation complete incl. the cost of providing and fixing necessary 27.5 cm long wire springs manufacture from high tensile steel wire of adequate stenght confirming to IS 4454 part I and M.S top cover of required thickness for rolling stutters. ( 80 X 1.25 mm M.S laths with 1.25 mm thick top cover).

Providing and fixing false ceiling at all hieght including providing and fixing of frame work made of special section power pressed from M S sheet and galvanised with zinc coating 120 gms / Sqm both side inclusive as per IS: 277 and consisting of angles cleats of size 25 mm widex 1.6 mm thick with flanges of 27 mm and 37 mm at 1200mm centre to centre one flanges fixed to the ceiling with dash fasteners 12.5 mm dia X 40 mm long with 6 mm dia bolts other flanges of cleat fixed to the angle hangers of 25 X 10 X 0.5 mm of required lenght with nuts and bolts of required size and other end of angle hanger fixed with GI channels 25 X 15 X 0.9 mm running at the spacing of 1200 centre to centre to which the ceiling section 0.5 mm thick buttum waged of 80 mm with trapped flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to GI intermediate channel with conneting clips made out of 2.64 mm dia X 230 mm long GI wire at every junctions inlcuding fixing perimeters channels 0.5 thick 27 mm high having flenges of 20 mm and 30 mm long the perimeter of ceiliing fixed to wall partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive all screw @ 230 mm interval includuing fixing of gypsum board to ceiling sections and perimenter channel with the help of dry wall screws of size 3.5 X 25 mm at 230 mm centre to centre incluidng jointing and finishing to a flush finished of tappred and square edge of the gypsum board with recommended jointing compound jointing tapes finishing with jointing compound in 3 layer covering up to 150 mm on both sides of joint and two coat of primer suitable for both all as per manufacture specifications and also including the cost of making opening for lights fitting grilles , diffusers cotouts made with frame of perimeters channel suitably fixed all complete as drawing and speicification and direction of the Engineer - in- charge but excluding the cost of paiinting with ( 12 .5 mm thick tapered edge gypsum fire resistant both confirming to IS: 2095 PartL)

Carriage of material source to site A) Cement/Steel avg. lead of 52 km

Sand/stone agg. Avg lead of 15 Km

Stone avg lead of 15 Km