Ladakh Autonomous Hill Development Council Tender
... More
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Technical
Technical
Financial
Class Of Bidder
... View More
The class of contractor required to participate in this tender is "A class".
Technical Capacity
... View More
The required prior work experience for the bidder includes completing at least one similar building work. The value of this similar work should be equal to 1/3th of the advertised cost, and it should have been completed as a prime contract in a single allotment within the last three years. Additionally, the bidder should have a financial turnover equal to 40% of the advertised cost in any one year during the last 03 years. The specific amount of the similar work completed is 1/3th of the advertised cost, and the percentage of the financial turnover is 40% of the advertised cost.
Costs
EMD
₹ 5,60,280Document Cost
₹ 2,800Tender Fee
Refer Documents
Summary
Construction Of Tourist Dak-banglow At Sandoo Kargil.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_LAHDC_16207_1Tender No
E-TENDER 03 OF TDA KARGIL 2025-26Tender Authority
Ladakh Autonomous Hill Development Council ViewPurchaser Address
-Website
http://tenders.ladakh.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m(ordinary rock)@60%
86.5
957
82815.965
... More
Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. (Hard Rock B.P)@40%
57.66
1953
112620.9354
... More
Providing and laying of stone solling on horizontal level. Incld. c/c stone and carriage complete.
12.29
987
12130.23
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc.complete.
43.25
667
28890.135000000002
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
18.62
5556
103466.12640000001
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
62.54
5561
347824.3402
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
21.43
6411
137399.3022
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
41.06
390
16037.2148
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchorblocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
78.48
10399
816180.2280000001
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
36.72
11211
411684.81119999994
... More
Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6coarse sand)Above plinth level upto floor V level including carrigae Complete
135.05
9870
1332943.5
... More
Providing plinth protection 50mm thick of M-10 nominal min (max agg. Size 20mm) concrete including smooth finishing the top surace including carriage
29.73
616
18339.5451
... More
Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 5 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm.
118.17
4248
501997.9770000001
... More
Centring and Shuttering including strutting, propping, etc and removal of form for.(a)Foundation,plinthbeam, footing, bases of column.
308.43
297
91646.8902
... More
Beam,lintels, beams, plinth beams, girders, bressumers and cantilevers
168.15
584
98245.0005
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
200.66
746
149764.5976
... More
Suspended floors, roofs, landings, balconies and access platform
210.56
716
150948.3584
... More
Stairs, (excluding landings) except spiral-staircases
12.35
864
10673.858
... More
Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/ workshop to construction site including placing in position and binding all complet job.
14976
106
1589103.36
... More
12mmCement plaster finished with a floating coat of neat cement of mix:(1:6)(1 Cement :6 Fine Sand)
985.01
275
271498.3063
... More
Providing and fixing 12mm thick wooden planks ceiling including polishing of one or more coat (frame work for base to be paid for separately) with M.S. screws 2nd class teak wood complete job.
224.07
2467
552892.725
... More
Providing wood work in frames of falseceiling,partitions, wall etc. sawn and fixed in position with necessary stainless steel screws etc.Budloo/Fir wood Budloo/Fir wood
5.8
63430
367898.814
... More
Providing and fixing of 12mm panelling in wallls (frame work shall be paid seprately ) incld the cost of jam work all complete incld the cost of polishing all complete job.
3861
329
1270269
... More
Providing and fixing 50x50mm ornamental Budloo wood cornice including nails etc. complete.
634
123
78222.92
... More
Lamianate flooring Providing and laying wooden "AC4" floorings per specification to be approved by site engineer including cost of foam 12mm thick and cost of cornice complete job.
133.5
1645
219607.5
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class Teak wood
7.17
175094
1255430.1461999998
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick ecorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type
62.43
2468
154132.8027
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)Second class teak wood 30 mm thick shutters
23.74
4263
101207.6558
... More
Providing and fixing Float glass panes of 4 mm thick glass pane (weight not less than 10kg/sqm). Complete job
114.08
2368
270199.62080000003
... More
Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets
91.44
21
1922.0688
... More
Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 125x75x4 mm
60
137
8260.199999999999
... More
100x63x4 mm
70
110
7730.8
... More
providing and fixing wooden railing including blusters, polishing and all necessary fixtures , fittings complete job of ist class kail wood.
22
4935
108570
... More
Providing and fixing main post for railing including fixure fittings and polishing of the wood complete job first class kail wood.
8
1645
13160
... More
Making out and fixing of new wooden Budloo wooden Jalis and railings including post of Balconies including polishing of wood one or more coat (wood to be approved by Engineer In charge ) with a thickness of 50mm Complete job
25.64
4935
126533.40000000001
... More
Providing and fixing local type kaju with post of 4"x4" size with carving of local desingn complete . 2nd class kail wood
20
1645
32900
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size
200
210
42150
... More
Supplying fixing and commissioning of Brass Handle with door lock system including key loading , all complete job as per instruction of engineer incharge
10
4112
41125
... More
Providing and fixing door/ window fittings of stain less steel L drop 12" with necessery screws complete job
12
1233
14805
... More
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 125x65x2.12 mm
200
51
10342
... More
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.75x47x1.70 mm
150
36
5442
... More
Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125mmmm
22
278
6123.259999999999
... More
Providing and fixing chromium plated brass handles with necessary screws etc. complete: 75mm
40
214
8582.4
... More
Providing and fixing aluminium kitchen cabinet handle /pull Handle / drawer handle / drawer handle Glossy Black finish Alluminium alloy 12 Inch
16
3290
52640
... More
Providing and fixing aluminium kitchen cabinet handle /pull Handle / drawer handle / drawer handle Glossy Black finish Alluminium alloy 10 Inch
16
3207
51324
... More
Providing and fixing aluminium kitchen cabinet handle /pull Handle / drawer handle / drawer handle Glossy Black finish Alluminium alloy 08 Inch
18
3125
56259
... More
Providing and fixing aluminium kitchen cabinet handle /pull Handle / drawer handle / drawer handle Glossy Black finish Alluminium alloy 04 Inch
20
3043
60865
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete : 300x10 mm
40
129
5188.8
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete : 150x10 mm
40
87
3494
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade
95.04
3591
341304.7968
... More
Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
582.2
232
135344.034
... More
Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm)
420.54
97
40842.844800000006
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
985.01
141
138886.41
... More
Providing and fixing .53mm thick colour profile sheet made or equivalent H.I rib profiled sheets 1000 to 1020mm cover width 28-35 mm T.C.T ( Total coated thickness) high tensile S.M.P Galvlume steel and fixed with 8mm Galvalume hex self drilling fasterner on each crest of sheet for conncection with purlins and seem and seem bolts 300mm centers on all side and end lapppes etc
465.24
1233
573989.85
... More
Providing hoisting and fixing trusses/purlins /rafters / posts/post plates or like components of 1st class budloo/fir wood including cost of screws etc complete.
10.12
171952
1740156.0616
... More
Providing and fixing of Safada batten of thick ness 2" with all necessary items. Including screws, nails etc complete job
2200
370
814286
... More
Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated Jor L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : 1.60 mm thick with zinc coating not less than 350 gm/m3
20
1457
29142.399999999998
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete..63 mm thick with zinc coating not less than 275 gm/m3
25
762
19058.25
... More
Providing and fixing of 40 mm x 6 mm thick flate iron with nuts and bolts etc in truss joints.
100
148
14805.000000000002
... More
P/F of 19mm thickness soffit of budloo wood specification including Jam work (1.5"x3" of Ist class budloo wood) underneath complete.
80
1480
118440
... More
Providing and fixing of 1'0" width eaves board of Budloo wood one side pllained, 1'1/2" thick complete.
54
822
44415
... More
Provding and fixing weather boardd of 12mm thick playwood including all necessary requirements complete.
500
98
49350
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily
51.18
1954
100047.68759999999
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
165.36
1246
206050.13520000002
... More
Providing and fixing Cubboard of playwood edge to edge of good quality ranging from 6mm to 18mm thick including all types of necessary items with carriage complete(18mm)
54.25
2220
120475.6875
... More
12mm
433.09
1891
819298.0075
... More
6mm
49.05
1480
72618.525
... More
Providing and fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS :15786:2008 of approved brand and shade with suitable full threaded steel screws, Hydraulic Hinges etc. in partitions, boxes,shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge with complet fittings all job complete
23.41
2878
67391.5375
... More
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancinglamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thickPVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loadedhinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.
54.16
3122
169114.05839999998
... More
Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:itchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250mm.
1
5767
5767.16
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
4.88
4968
24245.6456
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 25 mm dia (heavy type)
45
187
8424
... More
Providing and fixing of Kitchen chimeny of Bosh ,Elica etc with filterless Autoclean Kitchen chimney complete job
1
37012
37012.25
... More
Providing and fixing traditionally carved wood work (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge,complete with;
58.06
13745
798082.8898
... More
Polishing in high gloss/matt finish melamine clear polish on wood work inrequired color/wooden shade texture with following process in the sequenceas detailed below 1.The surface to be polished is rubbed with sand paper 80/120 no. and thenwithsand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3.On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
58.06
1125
65359.3032
... More
Applying priming coats with primer of approved brand and manufacture having low VOC (Volatile Organic Compound ) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre
180.6
62
11256.797999999999
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
180.6
141
25464.6
... More
French spirit polishing :Two or more coats on new works including a coat of wood filler
150
369
55410
... More
Disposal of excavated surpulus earth from cutting including carraige of lead upto 2km by MT.
2897.96
184
535021.3752
... More
Carriage of stone lead up to 20km
62.54
439
27475.6982
... More
Carriage of Cement/Steel lead upto 60km by MT
82.15
647
53165.0155
... More
Carriage of Sand /Agg. Lead up to 30km by MT.
245.59
462
113482.2272
... More
Sanitary fitting /Septic tank and Compund Walling:
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including dressing and neatly levelled.(Ordinary Rock)@60%
32.37
372
12060.414599999998
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including dressing and neatly levelled.(ordinary rock)@40%
21.58
1063
22942.9928
... More
Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m(ordinary rock)@60%
21.24
957
20335.388399999996
... More
Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. (Hard Rock B.P)@40%
14.16
1953
27657.170400000003
... More
Providing and laying of stone solling on horizontal level. Incld. c/c stone and carriage complete.
7.79
987
7688.7300000000005
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
10.87
213
2325.3104
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
6.03
5556
33507.0216
... More
Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level :1:2:4(1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
4.77
7758
37006.3278
... More
Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6coarse sand)Above plinth level upto floor V level including carrigae Complete
5.31
9870
52409.7
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchorblocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
313.07
8116
2540932.4726
... More
Providing and laying factory made chamfered edge cement concrete paver block in footpath, parks, lawns, drve ways or light traffic parking etc, of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer inchage. 80mm thick C.C paver block of M-30 grade with approved colour, design and pattern.
69.68
886
61763.65520000001
... More
Providing and laying in position cement concrete of specified grade M10 excluding the cost of centering and shuttering 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size nallah stone including curing and carraige complete.
10.85
6411
69565.1005
... More
Centring and Shuttering including strutting, propping, etc and removal of form for:
(a)Foundation,plinthbeam, footing, bases of column.
29.72
297
8831.0008
... More
Edge of the slabs.
21.55
716
15448.9795
... More
Back side B/Wall.
83.61
297
24843.875399999997
... More
Retaining walls, return walls, walls (any thickness) including attached pilasters,buttresses, plinth and string courses fillets, kerbs and steps etc.
680.03
616
419401.7022
... More
Columns, Pillars, Piers, Abutments, Posts and Struts.
29.73
746
22189.2828
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. Nominal mix M20 grade (1:1.5:3) mix max stone agg. 20mm thick including curring complete. Including all types of carriage.
2.72
10099
27470.912000000004
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchorblocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
4.75
10399
49399.2875
... More
Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/ workshop to construction site including placing in position and binding all complet job.
971.1
106
103043.421
... More
Providing,hoisting and fixing up to floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 (1 cement : coarse sand) cost of required centring, shuttring and finishing with neat cement punning on exposed surface and curing.
1.69
16067
27153.9736
... More
Dry random rubble stone masonary in foundation and upto plinth level.
7.53
3942
29687.9286
... More
Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm)
17.74
97
1722.9088
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
17.74
141
2501.3399999999997
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes (size 3'.6"x6'). including all types of carraiges.
Railling 6No@60Kg/No
360
167
60141.6
... More
Steel gate @800kg
800
167
133648
... More
Finishing with Expoxy paint (Two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work.
41.81
193
8076.0196000000005
... More
Providing and laying cement concrete of grade 1:2:4 with 20mm graded stone aggregate for coping of the compound walling including the cost of curing complete.
0.08
9386
750.9088
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand)
3.23
5561
17964.0649
... More
Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Rectangular shape 600x450 internal dimensions.
4
1340
5360
... More
12mmCement plaster finished with a floating coat of neat cement of mix:(1:6)(1 Cement :6 Fine Sand)
87.97
275
24247.1711
... More
Providing and fixing of white vitreous W.C with C.P bolts C.I Chair or other things hanging arrangment with volume flushing cistern and internal fitting. Indian W.C
4
4112
16450
... More
English W.C
2
7402
14805
... More
Providing and fixing of white ceremic wash basin with CI/M.s brackets incld. Making good the wall of size 660x4060 Incld. Carrige upto site
8
2467
19740
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
6
230
1384.1999999999998
... More
Providing and fixing health foucet pipe with SS-304 Grade 1.25mter flexible hose pipe including fittings complete
6
658
3948
... More
Providing and fixing white veterious pedestrial for wash basin completely with waste PVC pipe and all fittings complete.
8
2878
23030
... More
Providing and fixing of PVC prience pipe type-B of different size incld. Fitting as per requiremant complete.
100mm dia
190
641
121894.49999999999
... More
75mm dia
200
616
123374
... More
P/F of 4" PVC (P- trape, floor trape, door junction , plain bend and tee) and 3" plain bend complete job.
1
12337
12337.5
... More
Providing and fixing PPR Pipe with all fittings and fixture complete.
32mm dia
200
382
76520
... More
20mm dia
250
251
62830
... More
Providing and fixing of Gysers of standard 35 litre like venus or usha Incld. All fixture and fitting complete
8
20562
164500
... More
Providing and fixing of C.P fitting of Jaugar, Haindware, Parko,ceara, brand including all fixiture complete job. Angle Cock
50
699
34956.5
... More
Bib Cock/Pillar cock
15
781
11720.7
... More
Wall mixer 3 in one
10
4770
47705
... More
Basin mixer single lever.
8
4523
36190
... More
Over Head shower with arm
6
3290
19740
... More
Coupling
25
164
4112.5
... More
CP nipple different size.
25
287
7196.75
... More
P/F of elipsoidal towel holder inclding cost of screw complete job.
8
164
1316
... More
P/F of PVC waste pipe for sink or washbasin including pvc waste fitting flexible pipe 40mm dia complete
8
205
1645.04
... More
P/F mirror with required thickness shape and size including the shelve of hardened glass fixture (600mmx450mm) complete
8
1645
13160
... More
Supplying and installing 0f Water storage tank of standard make like puff water tank in 2000ltr capacity including all fixture complete.
2000
24
49360
... More
P/F of ventillation fan self closing shutter type ISI marked like khaitanusha etc.
8
1480
11844
... More
Providing and fixing Insulation of pipe with heat Tracers
300
2056
616875
... More
Providing and fixing Toilet paper Holder of standard maker
8
205
1645.04
... More
Profiding and fixing soap line 75mm pvc Type -B
25
575
14393.75
... More
Profiding and fixing Hangers of required pattern and size as per site engineer of ornamental type.
6
411
2467.5
... More
Providing and fixing Door stoopers.
15
329
4935
... More
Carriage of Cement/Steel lead upto 60km by MT
79.29
647
51313.3164
... More
Carriage of Sand /Agg. lead up to 30km by MT.
470.88
462
217584.2304
... More
ELECTRIFICATION WORK: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Goup A
80
940
75275.20000000001
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group A
10
1413
14132.2
... More
Wiring for circuit/sub mains wiring along with earth wire of the following size of FR PVC insulated copper conductor single core cable insurface/recessed medium class PVC conduit as required. 2x2.5 sq.mm +1x2.5 sq.mm earth wire
498
248
123902.40000000001
... More
2X4 sq.mm + 1x4 sq.mm earth wire
430
302
129937.40000000001
... More
2x6 sq.mm + 1x6sq.mm earth wire
40
397
15887.2
... More
2x10 sq.mm + 1x6 sq.mm earth wire
72
524
37782.72
... More
2x16 sq.mm + 1x6sq.mm earth wire
72
682
49116.96
... More
S/F following specification of surface/recessed LED lighting fixtures: Wall Light of Elegant Design Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base.[LHFOAJE1TZ1I060]
12
1867
22408.800000000003
... More
15 W surface LED Light (Round) lm>1440.
60
1139
68398.8
... More
50W LED Food Light with IP 66 Protections including angle bracket, D clamp of required size to fix on wall.
4
3166
12666.52
... More
20W, 2 feet long LED tube light in a compact batten with curved diffuser. [LHEXASP7PN1W020]
20
560
11219
... More
SITC of 6500 K LED strips with uniformity of light for perfect ambiance.
30
289
8685.599999999999
... More
S/F of 1200mm sweep 3 blade Energy efficient 5-star Ceiling fan complete with assembling of blades, down rod, shackle insulator, canopy etc. including 2 module stepped type modular fan regulator.
8
2714
21714
... More
S/Fof exhaust fan shutter type of sweep 450mm in the existing opening, including making the hole to suit the above fan, making good the damage as required.
7
2442
17099.809999999998
... More
SITC testing & commissioning of wall mounted fan having sweep 450mm, 3blades with all accessories as required.
1
2261
2261.87
... More
S/F following size/module, GI box along with modular base and cover plate for modular switches/sockets in recess etc. as required: 1or 2 module (75mm x 75mm)
5
269
1348.1
... More
3 module (100mm x 75mm)
16
295
4733.6
... More
4 module (125mm x 75mm)
34
316
10766.44
... More
6 module (200mm x 75mm)
45
363
16366.5
... More
8 module (225mm x 75mm)
2
410
821.52
... More
S/F following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. 6 amp switch
70
153
10766
... More
16 amp switch
41
253
10386.53
... More
3 pin, 6 amp socket outlet
70
289
20266.399999999998
... More
6 pin, 16 amp socket outlet
41
316
12983.060000000001
... More
Indicator lamp
22
99
2189.44
... More
MCB Distribution Board: S/F Double door MCB distribution boards, 240V/415V, Sheet steel, Powder coated DB’s suitable for MCB’s fitted with Bus Bar, Neutral link, Earth Bar and Din bar of following no. of ways : 12-way, double door SP&N
4
2623
10495.08
... More
16 Way, Double door SP&N
4
3619
14476
... More
S/F of 5 Amps to 63 Amps, 240V, “B series, ISI Mark” miniature circuit breakers suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required: Single pole 6A, SP MCB
40
271
10857.2
... More
Single pole 16A, SP MCB
36
271
9771.48
... More
Double pole 40A, DP C/O MCB
4
2714
10857
... More
Double pole 63A, DP MCB
4
909
3637.08
... More
100 A, 4P Changeover Switch
2
16285
32571
... More
63A Busbar Chamber
2
12666
25333
... More
SITC of split Air conditioner 1.5TR hot and cold suitable up to -8°C complete with installation including 5KVA Automatic Voltage Stablizer. [Hitachi/LG/Voltas/Blue star]
5
76903
384518.75
... More
SITC of wall mounted 100 A TPN Al Bus bar Chamber with Incomer TPN MCCB and Outgoing Isolator having the following specification.
TPN Aluminium Bus bar Size: 30mm x 6mm with colour coded PVC Sleeves. (Take Bus-Bar Density:0.8A/mm2 )
Incomer: 100Amp 4P, 25KA FP MCCB -------------01 No.
Outgaining: 63 Amp DP Isolator -- ----------12 No.
Indication Light (RYB) ----------------------01 Set
1
47047
47047
... More
Earthing with Cu. earth Plate 600mm x 600mm x 3.5 mm thick along with connection from the earth plate by a copper strip of size 2R x 25mmx5mm up to the earthing terminal in panel room including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 3.2 mtr. long etc. with charcoal or coke and salt of 2.8 Cum as required. Depth of earning must be 10 feet from the ground level.
1
19904
19904.5
... More
Supplying and laying following size and specification of XLPE insulated PVC sheathed armored cable with aluminum conductor for working voltage 1100 V grade as per IS: 7908, including thimble/lugs, double compression glands etc. of respective size. 50 sq.mm 3.5 core Armoured Al. Cable
50
877
43880
... More
Supplying and fixing of following sizes of medium class PVC Conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm
450
131
59031
... More
Supplying and fixing of MS fan box.
10
226
2261.8
... More
Supplying and fixing of 25mm 4 way deep junction box.
78
117
9174.36
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (45 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (a)63 mm dia (OD-63 mm & ID-51 mm nominal)
40
223
8938.8
... More
CCTV SECURITY SYSTEM: Supply, Installation, Testing & Commissioning of Network WDR 2MP IR Rugged Mini Dome Camera having 12.8” 2 Megapixel progressive CMOS image sensor, Min. Illumination required 0.002ux/F1.5(color,30IRE) 0Lux/F1.5(IR on), 120dB True WDR, H.265/H.264B/Smart Codec / MJPEG (Sub Stream), 2.7mm~13.5mm, Motorized, F1.5 lens, Smart IR with upto 40m IR distance, Up to 128 GB microSDHC card, Class 10 (not included), DC12V, PoE (802.3af) (Class 0), ingress protection IP67, vandal resistance IK10, ONVIF Profile S/G/Q, FCC Part 15B, EN 55032,EN 50130-4,UL 60950-1, EN 62368-1,EN 50581,etc as required. (HONEYWELL/BOSCH/AXIS)
5
2261
11309.349999999999
... More
Supply, Installation, Testing & Commissioning of Network WDR 2MP IR Bullet Camera having 1/2.8” 2 Megapixel progressive CMOS, 2.7 mm – 13.5 mm MFZ Lens,True day/night (IR-cut filter),Wide dynamic range up to 120 dB,Low-light performance down to 0.002 Lux / F1.5 (color, 30IRE), 0 Lux (IR ON),Up to 197 ft (60 m) IR lumination, H.264/H.264B/H.265/Smart Codec/MJPEG (Sub Stream) , Support up to Up to 128 GB micro SDHC card, Class 10 (not included), DC12V or PoE (802.3af)(Class 0), IP67 INGRESS PROTECTION ,ONVIF Profile S/G/Q, FCC Part 15B, EN 55032, EN 50130-4, UL 60950-1, ROHS- EN 62368-1, certifications, etc as required.(HONEYWELL/BOSCH/AXIS)
1
3619
3619
... More
Supply Installation Testing and Commissioning of 6 Channel NVR (Network Vedio Recorder) having Quad-core embedded processor , Embedded LINUX ,1 HDMI (up to 3840 × 2160);
1 VGA , H.265/H.264/MJPEG/MPEG4 compression, 2 SATA ports, up to 16 TB, Input 320 Mbps; Output 320 Mbps network throughput , 8 ports (802.3af/at) POE, FCC , ROHS , UL Certifications,etc as required. (HONEYWELL/BOSCH/AXIS)
1
13571
13571.25
... More
Supply, installation, testing and commissioning of 4TB Surveillance Hard Disk S V SERIES-offer high capacities, durable reliability and performance tuned to the high-write workloads of today’s 24×7 video surveillance systems as required. ( SEAGATE/WD/HITACHI)
1
9047
9047.5
... More
Suppling,Laying & fixing of 15 MTR HDMI cable on surface as reqd .(Stackfine/Extron/Kramer)
1
3799
3799.95
... More
Supply, installation, testing and commissioning of 1 KVA Inverter with 200Ah Tubular battery complete etc as required. (APC/MICTOTEK/VGUARD/LUMINOUS)
1
36190
36190
... More
Supplying and commissioning of 9 U rack with 1 no extra tray , Power Distribution Unit of 05Amps of 05 nos.Socket in a Single Pole / Screw,Mountable,etc as required.(WQ/VALRACK/D LINK)
1
8866
8866.55
... More
Supply, installation, testing and commissioning of 10 Port Managed POE Switch having 8 nos 10/100/1000 PoE ports with 62W power budget and 2 Combo mini-GBIC ports , Static routing, QoS, Voice/Guest VLAN, GVRP, MSTP, IGMP Snooping, Time-based Access Control Lists , 802.1x including DVA, Web-based Authentication, IP/MAC Binding, Private VLAN Edge, IPv6 First Hop Security, IP Source Guard as requird.(Make – CISCO – Model - SG – 350/ 10 /HP/JUNIPER)
4
31666
126665
... More
Supplying & Laying of CAT 6 Cable should be unshielded twisted pair cabling system, TIA / EIA 568-C.2 Category 6 Cabling system.Network support should be ultra high speed data networks such as Gigabit Ethernet (1000 Base-T and 1000 Base-TX) and beyond.Cable should be ETL Verified, UL Listed and UL channel verified- all three certificates are mandatory. Conductors type should be 23 AWG solid bare copper.Frequency tested should be up to 600 MHz minimum.Impedance should be 100 ± 15 Ohms.Propagation delay should be 535ns/100m @250MHz.cable should be RoHS compliant
50
99
4976.5
... More
Providing and fixing ISI markded outdoor lamp with elegant design and sturdy materials Light blub included Design and type of the Lamp as per the site engineer complete job.
5
1628
8142.75
... More
Providing and laying ISI MarkedEarthern Condute including adhesive/nut bolts what ever required to connect the condute all complete job.
20
67
1357.2
... More
Providing, fixing and Laying ISI marked Wire pairs of red and black colour or any other colour of area 1.5sqmm dia, all complete job.
50
37
1899.5
... More
Providing and fixing solar panel to generate 5kw power on roof top including cost of power on surface including cost of Solar Panels, inverters, Mounting structures, solar charge controller, Batteries, wiring and cables, circuit breakers, combiner box, DC Disconnect switch, AC disconnect switch, Metering equipment, Surge protection Devices, Grounding equipment, Monitoring system, Voltage Regulators, remote monitoring and control system, lightning protection, enclosures and weatherproofing, angle irons, hooks, nuts and bolts and installation etc all complete job as per direction of site engineer roof top area requirement appx 535sqfts
1
28787
28787.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%