Ladakh Autonomous Hill Development Council Tender

c) 0-25 A

Ammeter MC analog, portable box type housed in Bakelite case a) 0 - 500 mA

b) 0-5 A

c) 0-25 A

Kilo Wattmeter Analog 0-1.5-3KW, pressure coil rating-240v/440v, current rating: 5A/10A Analog, portable type Housed in Bakelite case

Digital wattmeter of 230 V, 1 KW, 50 Hz

A.C. Energy Meter Single Phase, 10 A, 240 V induction type

A.C. Energy Meter Three Phase, 15 A, 440 V induction type

Power factor meter digital 440 V, 20 A, Three Phase portable box type

Frequency Meter 45 to 55 Hz Dimension 96x96, Material-Plastic, Operating voltage 220/440

Magnetic flux meter 0-500 tesla, Display Digital, Resolution .1 Lux, Power 220,50Hz.

Lux Meter LCD read out 0.05 to 7000 lumens with battery.

Tachometer Analog type – 10000 RPM, weight 120-200gm, Colour silver, Material- Stanless steel.

Tachometer Digital Photo Sensor Type-10000 RPM, Item weight 490g, Batteries 3AA batteries, Display large 5 digit, 18mm LCD, Range- 2.5 to 99,999 RPM

Megger Analog - 500 V, Measurement type- ohmmeter, Max operating voltage-500v, Power source- Battery powered, voltage 1.5 volt.

3- point D.C. Starter For 2.5 KW DC motor

I5 AND I7 COMPUTER OR latest VERSION CPU 32/64 Bit, 7th generation or higher, i5 or latest processor, speed 3GHz or higher. Ram 8GB or higher, ITB HDD/SDD, wifi, Enabled Network card, Integrated Gigabit, Ethernet with USB mouse, USB keyboard and Monitor (as available in the market) or All in one PC.

Wheat Stone Bridge with galvanometer and battery Portable wheatstone Bridge in wooden cabinet. Battery 9V inbuilt. Display type Analog, Freq 50HzMeter- Round Analog 30-0-30 galvanometer. Resistance Range 0.001 to 11.1 mega ohms, Ratio Arm= Seven ratio of 1000,x100,x10,x1,x0.1,x.01x0.001

Single Phase Variable Auto Transformer 0 - 270 V, 10Amp (Air cooled), Item weight- 10kg,

Phase Sequence Indicator 3 Phase, 415 V, Power source-Battery powered. Item weight 300gms, Dimension 20x15x.3cm, Item Height 3mm, Item width 15cm.

Growler 230 V, 50 Hz, Single Phase, Adjustable jaws, Testing armature with ampere meter and testing probes.

DC Series Motor coupled with spring balance load 1.3H.P 250V with copper wound 2 Point starter and speed regulator and copper commutator and carbon brush, control panel and other accessories such as voltmeter, ampere meter and motor fitted copper winding. Panel Specification: Panel made of MS Sheet of thickness 18swg, of size 2’6” X2’X5”(depth). Front door of panel should be on hinges so that it maybe opened, with panel key and lock arrangement. Panel should be duly painted with powder coated paint. The panel instruments: Two point DC starter suitable for above motor, flush mounted.1no. MCB 16amp 1No.3. 4 Indicating lamp LED type 16mm size for incoming and outgoing supply of the Panel board: 2 nos. 4. Digital Voltmeter0-300volts DC5. Digital Ammeter 0-15Amp DC.5. Digital Ammeter 0-2 Amp DC.7. Wire wound Field regulator Potentiometer type suitable to keep constant rated RPM of the motor at full load 1no. 8. Motor is mounted on fabricated base plate of MS C channel with suitable anti vibration mounts.

DC Shunt Motor 2.5 KW, 220volt, DC shunt motor 3HP with copper wound 3 Point starter and speed regulator. 2. 4Pole ,1500 rpm,3.DC shunt motor with copper commutator and carbon brush. The Panel specification: The panel made of ms sheet of thickness of size 2’.6”X2’5”(depth), front door of panel should be on hinges so that it may be opened with panel key and lock arrangement . The instrument of Panel;3 point DC starter suitable for above motor.MCB16 amp4 indicator lamp led 16mm size for incoming and outgoing supply of the panel board 2nos.Digital Voltmeter 0-300 voltDigital Ammeter 0-15amp DCDigital Ammeter 0-2amp Wire wound Field regulator Potentiometer type suitable to keep constant rated RPM of the motor at full load 1no. 8. Motor is mounted on fabricated base plate of MS C channel with suitable anti vibration mounts

DC compound Motor with starter and switch KW ,220 volts DC compound motor ,3 hp with copper wound starter and switch :- 3HP 220 volts ,1500rpm, 4 pole with copper commutator carbon brush four point starter with NO volt coil and over load relay , brass stud, DP MCB switch 20A. The panel Specification: The panel made of ms sheet of thickness of size 2’.6”X2’5”(depth), front door of panel should be on hinges so that it may be opened with panel key and lock arrangement . The instrument of Panel:3 point DC starter suitable for above motor.MCB16 amp 4 indicator lamp led 16mm size for incoming and outgoing supply of the panel board 2nos..Digital Voltmeter 0-300 volt Digital Ammeter 0-15amp DC Digital Ammeter 0-2amp Wire wound Field regulator Potentiometer type suitable to keep constant rated RPM of the motor at full load 1no. 8. Motor is mounted on fabricated base plate of MS C channel with suitable anti vibration mounts