Indo Tibetan Border Police Tender

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All works upto plinth level: 1:2:4 (1 cement : 2 coarse sand (zone III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-A

Providing and installation of PUF Toilet block 01 set of size 3000 mm x 2200 mm. including 100mm Wall Panels. Wall panel :- 100mm thick PUF insulated Wall Panel with 0.50mm thick PPGI sheet (Make-JSW) (Off White RAL-9002) both sides with PUF Density 44 Kg/m3 ±10% in metalic tongue and Groove joint system with cut to size, with no loading of wastage with additional 90º bends in Male & Female groove to have proper sealing, Strength & Air Tight joints Panel to Panel, CFC free & Ozone friendly.(Pentane Based) Roof Panel :- 50/80mm thick PUF insulated Roof panel with 0.50mm thick corrugated profile sheet from out side and micro ribbed 0.50mm thick PPGI (Make-JSW) inside with PUF Density 42 Kg/m3 ± 5% with proper overlapping and projections on all sides, CFC free & Ozone friendly.(Pentane Based) Door :- PUF Insulated door of size 750x2100mm with powder coated aluminium chowkhat, 40mm thick door leaf and accessories like Hinges, Handles, Aldrop and Tower bolts. UPVC Ventilator :- UPVC Ventilators of size 450x600mm top hung type complete with accessories like hinges, handles, and tower bolts. Floor panels.:- 80mm thick PUF insulated FloorPanel with 0.50mm thick PPGI sheet (Make-JSW) (Off White RAL-9002) bottom sides and 18mm ply on top side finished with 2mm thick aluminium chequered plate with PUF Density 44 Kg/m3 ±10% in metalic tongue and Groove joint system with cut to size, with no loading of wastage with additional 90º bends in Male & Female groove to have proper sealing, Strength & Air Tight joints Panel to Panel, CFC free & Ozone friendly.(Pentane Based) PUF Septic Tank :- FRP Septic tank with 50mm thick PUF Insulation complete with lid and wheels. FRP Sheet Covering :- FRP Sheet covering on 3 sides of the waste chamber with one side openable gate. Steel Structure :- Prefabricated MS Steel Structure consist of main vertical coumns, rafters, purlins and floor frame. All the components shall be made of with RHS 80x40x3.5mm. All the components will be welded with suitable size of MS plates which connects the components through nuts and bolts.The complete structure will be duly fabricated and painted with two coats of red oxide zinc chromate primer. Sanitary Items :- Internal Sanitary items like Ecosan Toilet Seats with complete fittings for two seater toilet block. Flashings & Accessories :- PPGI Flashings like top/bottom channels, inner corners, outer corners, nuts & bolts with silicon sealant etc.