Forest Ecology And Environment Department Tender

Centering and shuttering including strutting, propping etc. and removal of form work for: - Foundations, footings, bases for columns = 10 x 4 x 1'-0" x 2'-0" = 80.00sft or 7.43sqm

Providing and fixing termal painted coated G.S. Sheet of required thickness including polymer coated L-hook, bolt& nuts 8mm dia. limpet & bitumen washers complete work. including carraige complete job. - 0.53mm thick = 1 x33'-0"x 12'-0" = 396.00sft or 36.79sqm

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) - Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15). including carraige complete job. Frames (1.5" x 2.5") Single Groove V/M: Section A: 1 x 2 x 9'-0" = 18.00rft 1 x 1 x 7'-0" = 7.00 rft Section B: 1 x 2 x 9'-0" = 18.00rft Section C: 1 x 2 x 9'-0" = 18.00rft H/M: Section A: 2 x 3 x 1'-11" = 11.52rft 2 x 1 x 3'-6" = 7.00 rft Section B: 2 x 15 x 1'-11" = 57.60rft Section C: 2 x 7 x 1'-10" = 25.62rft Total = 162.74rft or 49.62mtr @1.130kg/mtr = 65.00 kg Double Groove : V/M: Section A: 1 x 2 x 9'-0" = 18.00rft 1 x 1 x 1'-9" = 1.75 rft Section B: 1 x 14 x 9'-0" = 126.00rft Section C: 1 x 6 x 9'-0" = 54.00rft H/M: Section A: 3 x 1 x 1'-11" = 5.76rft Section B: 15 x 1 x 1'-11" = 28.80rft Section C: 7 x 1 x 1'-10" = 12.81rft Total = 294.49rft or 89.78mtr @1.450kg/mtr = 130.18 kg Bottom members (3" x 2.5") Single Groove H/M: Section A: 3 x 1 x 1'-11" = 5.76rft Section B: 15 x 1 x 1'-11" = 28.80rft Section C: 7 x 1 x 1'-10" = 12.81rft Total = 47.37rft or 14.44mtr @2.107kg/mtr = 30.43 kg Clips: (Section A,B,C & Door) = 1463.40 rft or 446.16 mtr @0.071kg/mtr = 31.68kg G-Channel : (For sliding door) = 8.00rft or 2.44mtr @1.621kg/mtr = 3.96kg Net Total = 262.25kg

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) - Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15). including carraige complete job. Door Shutter : (3"x2.5") Single groove V/M: 2 x 7'-0" = 14.00rft H/M: 3 x 3'-0" = 9.00rft Total = 23.00rft or 7.00mtr @2.107kg/mtr = 14.75kg

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge. - Pre-laminated particle board with decorative lamination on both sides. complete job. Section A: 3 x 1'-11" x 2'-0" = 11.52 sft Section B: 15 x 1'-11" x 2'-0" = 57.60 sft Section C: 7 x 1'-10" x 2'-0" = 25.62 sft Door shutter: 1 x 3'-0" x 2'-0" = 6.00 sft Total = 100.74sft or 9.36sqm

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) including carraige complete job. With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm Section A: 3 x 1'-11" x 4'-7" = 26.38 sft 4 x 1'-11" x 1'-9" = 13.44 sft Section B: 15 x 1'-11" x 4'-7" = 131.90 sft 15 x 1'-11" x 1'-9" = 50.40 sft Section C: 7 x 1'-10" x 4'-7" = 58.67 sft 7 x 1'-10" x 1'-9" = 22.42 sft Door shutter: 1 x 3'-0" x 4'-3" =12.75 sft Total = 315.96sft or 29.35sqm

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. - For sliding door

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm - For sliding door

Providing and fixing Aluminium sliding roller

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long,the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: - 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks) = 1 x 31'-0"x10'-0" = 310.00sft or 28.80sqm

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand). including carraige complete job. = 1 x 20'-0" x 2'-6" = 50.00 sft = 2 x 10'-0" x 2'-6" = 50.00 sft Total = 100.00sft or 9.29sqm

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20 mm nominal size stone aggregate. Flooring = 1 x 20'-0" x 10'-0" = 200.00 sft or 18.58sqm

Providing and fixing good quality solid cotton curatins for doors and windows of approved make. Size : (7'x4')

Providing and laying of traditional style central carpet of approved quality. Size : (12'x14') = 168.00 sft