United Electrical Industries Limited Tender

Supply,Conveyance and erection charges of BCH MAKE sHP STARTERbrRELAY RANGE 6-9.3 16A. Suitable for Motor Pump set on the existing Panelbrboard and giving necessary connection etc.complete including all charges

Supply,Conveyance and erection charges of BCH MAKE 15HP STARTERbrRELAY RANGE 23.32 L6A Suitable for Motor Pump set on the existing Panelbrboard and giving necessary connection etc.complete including all charges.

Supply,Conveyance aPnd erectioRn charges ofI BCH MCAKE 1OHP ESTARTERbrRELAY RANGE L3.2-20 T6A. Suitable for Motor Pump set on the existing Panelbrboard and giving necessary connection etc.complete including all charges..

Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.10 sq mm

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.brFabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board includinOg ptahrteitironEs, nfogldiinng,esehrroiundgingOetrc.gSuapnpliysaantdiofanbrsication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required.

Supply and providing copper earth bus in the panel board

Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.3 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type suitable for direct connection to motors.

Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor suitable for direct connection to motors.

Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.15 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor, suitable for direct connection to motors.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.32 Amp TP & N

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N

S & F switch disconnector fuse unit complete with handle assembly, door inter lock and padlocking arrangement of the following ratings in a sheet steel enclosure with indication lamps and making necessary cable connectionbr63 A, AC 23 A, 4 pole on-load COS

Supply and providing,laying and fixing of 150mm dia B class Medium G.I.Pipe withbrspecials inground etc.complete including all charges.

Supply and fixing 150mm dia B Class GI bend using required additional materialsbretc.completeincluding all charges

Supply and fixing 125mm dia B Class GI bend using required additional materialsbretc.complete including all charges

Supply and fitting 150mm MS flange (12mm thick) with all accessories in thebrdelivery pipe etc.complete including all charges

Supply and fitting 125mm MS flange (12mm thick) & 125mm flange washer with all required accessories accessoriesbrincluding allcharges