Travancore Devaswom Board Tender
... More
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Travancore Devaswom Board - TDB Tender
Civil And Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date3 Mar 2025
Closing Date20 Mar 2025
Tender Amount₹ 2,03,13,320
Technical
Technical
Additional Eligibility
Class Of Bidder
... View More
Registered "B" Class (Civil) & above Contractors/Firms of KPWD/TDB.
Bid Capacity
... View More
The bid capacity required in the given tender involves adjustments for various components, including cement, bitumen, steel, and fuel/lubricants. The formulas for these adjustments are as follows: 1. Cement component: Vc = 0.85 x Pc/100 x R x (Ci - Co)/Co
2. Bitumen component: Vb = 0.85 x Pb/100 x R x (Bi - Bo)/Bo
3. Steel component: Vs = 0.85 x Ps/100 x R x (Si - So)/So
4. Fuel and lubricants component: Vf = 0.85 x Pf/100 x R x (Fi - Fo)/Fo These formulas indicate the increase or decrease in the cost of work due to changes in the rates for these components. However, the specific bid capacity required is not explicitly stated in terms of a single value. The price adjustment applies for works with an original time of completion of more than 18 months, and the adjustment is determined during each month.
Technical Capacity
... View More
For works from Rs.150 lakhs to Rs.250 lakhs, the Works Manager should have a minimum of 3 years of experience, and the Site Engineers should have a minimum of 1 year of experience. For works from Rs.250 lakhs to Rs.500 lakhs, the Works Manager should have a minimum of 5 years of experience, and the Site Engineers should have a minimum of 2 years of experience. No specific information on the value and percentage of similar works completed is mentioned.
Costs
EMD
₹ 1,00,000Document Cost
₹ 7,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_TDB_745486_1Tender No
EET/eT-139/2024-25Tender Authority
Travancore Devaswom Board ViewPurchaser Address
-Website
http://http://travancoredevaswomboard.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood
20.64
-
-
... More
Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood
18.58
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 250x10 mm
16
-
-
... More
Providing and fixing chromium plated brass handles with necessary screws etc. complete:150x10
4
-
-
... More
Provinding and fixing chromium plated brass handles with necessary screws etc complete:125 mm
20
-
-
... More
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in- charge.
2
-
-
... More
Providing and fixing aluminium extructed section body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete
10
-
-
... More
Providing and fixing lock of approved quality with necessary screws etc. comlete
4
-
-
... More
Providing and fixing alumiinium work fpr doors, windows Ventilators and partitions with extruded built up standard tubular sections/appropriated Z sections and other section of approved make conforming to IS 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at juctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitres and joined mechanically whereever required including c;eat angle, Alluminium snap beading for glazing/paneling, C.P brass/stainless steel screws, all complete as per architectural drawings and the dorectopms of Engineer-in charge (Glazing, panelinh and dash fasteners to be paid fpr separately) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
357.12
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) Power coated aluminium (minimum thickness of powder coating 50 micron)
345.22
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. (Cost of aluminium snap beading shall be paid in basic item): with float glass panes of 5.50 mm thickness
130.8
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
1004.47
-
-
... More
Brick work common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement :6 coarse sand)
9.43
-
-
... More
Supplying and fixing sSingle shutter assonite/Ferro interior door shutters 35mm thick to suit the doors frames already fixed at site with style and nail kiln harded chemically treated jointed hard wood core, with expanded cullar core skin with Masonite skin with 4 Nos. 100mm.
4.2
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 50 0 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering shutteirn, finishing and reinforcement, with 1:1:5:3 (1 cement 1.5 coarse sand (zone III): 3 graded stone aggregate 20 mm nominal size)
0.1
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for lintels, beams, plinth beams, girders bressumers and cantilevers
1.34
-
-
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding alll complete above plinth level. Thermo -Mechanically Treated bars of grade Fe-500D or mooe
12.09
-
-
... More
12 mm cement plaster of mix:1:4 (1 cement ; 4 coase sand)
92.64
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:New work (Two or more coats) over and including priming coat with water thinnable cement primer
92.64
-
-
... More
distmattingremoving mangalore tiles over roof including ridge, hips, valley sheet wind tiles and bordering but excluding roof timber and stacking materials within a distance of 150 m
932.58
-
-
... More
Roofing with shingle 6mm thick fixed with adheshive on 12 mm thick V-Board is supported on steel truss including all material and labour cost
932.58
-
-
... More
Roofing with shingle 6mm thick fixed with adheshive on 12 mm thick over ridge portion including all material and labour cost etc.
205
-
-
... More
Dismantling tile work in flors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm and up to 40 mm
942.88
-
-
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposl of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 (1 cement:4 coarse sand)
114.3
-
-
... More
Chipping and removing existing concrete work wherever necessary including all cost and labour charges etc complete
15
-
-
... More
Chipping and portions of existig wall plastering works carefully without damaging the remining structure and removing the debris within a distance of 150m
40
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of tile 600 x 600 mm.
859.45
-
-
... More
Providing and laying Vitrified tiles indifferent sizes (thikness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in colours & Shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement:3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
27.22
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut of kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement, mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc, complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm
161.67
-
-
... More
Providing edge moulding ti 18 mm thick marble stone countersm nanities etc., including machine polishing to edge to give high gloss finish etc., complete as per design approved by Engineer - in - Charge Granite work
227.1
-
-
... More
Providing and fixing ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be speified by the manufaturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement :3 coarse sand) and joining with grey cement slurry@3.3kg per sqm, including pointing in white cement mixed with pigment of matchingshade complete.
93.6
-
-
... More
Providing and laying rectified Glazed Ceramci floor tiles of size 300x300 mm of more (thickness to be specified by the manufacturer), of 1st quality conforming to IS:15622, of approved make in colours. Whilte, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement :4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
22.68
-
-
... More
Providing and fixing stailess steel (Grade 304) railling made of Hollow tubes, channels, plates etc., including welding, grinding buffinh, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stanless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
187.64
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1
280.16
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:
366.85
-
-
... More
Removing old enamel paint by scrapping and sand papering an preparing the surface smooth including necessary repairs to scratches etc. complete
606
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work
662.96
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
1845.24
-
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
840
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
257.4
-
-
... More
APPENDIX II:CIVIL AND RELATED WORKS AT DINING AREA_-1. DINING AREA
Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge
206.4
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
1.43
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (I cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
42
-
-
... More
Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with ecessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood
22.56
-
-
... More
Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood
22.56
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm
12
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 150x10 mm
4
-
-
... More
Providing and fixing chromium plated brass handles with necessary screws etc. complete:125 mm
20
-
-
... More
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in- charge.
5
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
6
-
-
... More
Providing and fixing lock of approved quality with necessary screws etc. comlete
4
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
582.62
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) Power coated aluminium (minimum thickness of powder coating 50 micron)
563.2
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
194.21
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
1645.07
-
-
... More
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
5.61
-
-
... More
Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, rchitrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
1
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:6(1 cement:6 coarse sand)
8.86
-
-
... More
Supplying and fixing Single shutter Masonite/Ferro interior door shutters 35 mm, thick to suit the doors frames already fixed at site with style and nail kiln hardned chemically treated jointed hard wood core, with expanded cullalr core skin with Masonite skin with 4 Nos.100mm
5.04
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
3.15
-
-
... More
Providing and fixing ball bearing for rolling shutters
2
-
-
... More
Extra for providing grilled shutters manufactured out of 8 mm dia M.S bar instead of laths as per design approved by Engineer-in-Charges, (area of grill to be measured)
0.45
-
-
... More
Reinforced cement concreat work in beams, suspended floors, roofs, having slope up to 15 0 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centeringm shuttering, finishing and reinforcement, with 1:1:5:3 (1 cement 1.5 coarse sand (Zone ill): 3 graded stone aggregate 20 mm nominal size).
3.99
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
8.61
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
60.01
-
-
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
418.82
-
-
... More
12 mm cement plaster of mix:1:4 (1 cement :4 coarse sand)
150.84
-
-
... More
Distempering with oil bound washable distempr of approved brand and manufacture to give an even shade: New wor (Two or more coats) over and including priming coat with water thinnable cement primer
150.84
-
-
... More
Roofing with shingle 6 mm thick fixed with adhesive on concrete roofing including all material and labour charges etc complete
718.39
-
-
... More
Roofing with shingle 6 mm thick fixed with adhesive on 12 mm thick over ridge portion including all material and labour cost etc.
93.33
-
-
... More
Chipping and removing old plaster of terrace floor and cleaning the surface for laying screed concrete including disposal of rubbish to the dumping ground within 50 metres lead.
123.33
-
-
... More
Screed concrete on the top of terrace using cement concrete 1:3:6 using 12mm (nominal size) broken stone for uniform gradient towards the down water outlets and ducts added wotj water proofing admixture IWP liquid 200 ml per bag of cement after cleaning and applying a coat of cement grout mixed with SBR latex in the proportion of 2.50kg/bag of cement for the grouting area of 50m2/bag and placing the concrete according to the line of gradient and as per direction of the engineer in charge.
2.47
-
-
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurru mixed with water proofing cement compound consisiting of applying :a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. laying second llayer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.c) third layer of 1.5 mm thickness consisting od alurry of cement @ 1.289 kg/sqm mixed with water proofing cement compund @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.d) fourth and fina layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)
268.73
-
-
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, includinh cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead : Cement mortar 1:4 (1 cement :4 coarse sand)
36
-
-
... More
Chipping and removing exixting concrete work wherever necessary including all cost and labour charges etc complete
15
-
-
... More
Chiping and potions of existing wall plastering works carefully without damaging the remaining structure and removing the debris within a distance of 150m
40
-
-
... More
Providing and laying in position cement concreat of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 nominal size)
10
-
-
... More
Providing andlaying and floor tiles in different sizes (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand), including grouting the joints with while cement and matching pigments etc., complete. Size of Tile 600 x 600 mm
687.8
-
-
... More
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand), including groutig the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm
194.17
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, windows sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement :4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at levels. Granite of any colour and shade Area of slab upto 0.50 sqm
68.09
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc,complete as per design approved by Engineer - in- Charge Granite work
31.4
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufaturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in - charge, in skirting risers of steps and dados, over 12 mm thick bed of cementmortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of maching shade complete.
194.17
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1
189.28
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: Fully Perforated Gypusm Plaster Board of size 1200 x 2400 x 12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer - in- charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60.
378.55
-
-
... More
Removing old enamel paint by scrapping and sand papering an preparing the surface smooth including necessary repairs to scratches etc. complete
152
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
57.69
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
1396.97
-
-
... More
Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable primingcoat to give an even shade
517.77
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
375.95
-
-
... More
APPENDIX II:CIVIL AND RELATED WORKS AT DINING AREA_-2. INTERNAL WATER SUPPLY
Providing and fixing Adson - Bib Cock (Diamond) (DS-102) for sink.
3
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
20
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall
45
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chased and making good the wall etc. 20 mm pipe 12 Kgf/cm2
40.5
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2
22.5
-
-
... More
Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm dia 10 Kgf/cm2
20
-
-
... More
Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
18
-
-
... More
Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110 mm dia 4 Kg/cm2
30
-
-
... More
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
16
-
-
... More
Supplying and fixing PVC Floor Trap 100 mmx75 mm size uncluding material and abour charge complete
4
-
-
... More
Providing and fixing square-mouth S.W.gully trap class SP-1 complete with C.I grating brick masonry cganver with water tight C.I.cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P type with common burnt clay F.P.S (non modular) bricks of class designation 7.5
2
-
-
... More
APPENDIX III :CIVIL AND RELATED WORKS AT TOILET, WASH, PASSAGE,GENERATOR ROOM AND FRONT STEPS -1. TOILET, WASH, PASSAGE AND STEPS
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood
0.08
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
12
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body,
door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
2
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead . For thickness of tiles 10 mm to 25 mm
333.26
-
-
... More
Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
3.88
-
-
... More
Brick work with common burnt clay F.P.S. (non odular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand)
4.42
-
-
... More
Supplying and fixing Single shutter Masonite/Ferro interior door shutters 35 mm, thick to suit the doors frames already fixed at site with style and nail kiln hardned chemically treated jointed hard wood core, with expanded cullalr core skin with Masonite 4 Nos 100mm
4.2
-
-
... More
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-charge Extruded section profile size 48x40 mm
20
-
-
... More
Providing and fixing to existing door frames 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).
6.72
-
-
... More
Reinforced cement concreat work in beams, suspended floors, roofs, having slope up to 15 0 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering , finishing and reinforcement, with 1:1:5:3 (1 cement 1.5 coarse sand (Zone III):3 graded stone aggregate 20 mm nominal size).
0.1
-
-
... More
Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
1.11
-
-
... More
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more
6.05
-
-
... More
12 mm cement plaster of mix:1:4 (1 cement :4 coarse sand)
95.19
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work ( Two or more coats) over and including priming coat with water thinnable cement primer
22.32
-
-
... More
Roofing with shingle 6 mm thick fixed with adhesive on concrete roofing including all material and labour charges etc complete
160.33
-
-
... More
Roofing with shingle 6 mm thick fixed with adhesive on 12 mm thick over ridge portion including all material and labour cost etc.
25.4
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead . For thickness of tiles 10 mm to 25 mm and up to 40 mm
404.85
-
-
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead : With cement mortar 1:4 ( 1 cement : 4 coarse sand)
61.44
-
-
... More
Chipping and removing exixting concrete work wherever necessary including all cost and labour charges etc complete
10
-
-
... More
Chipping and portions of existig wall plastering works carefully without damaging the remining structure and removing the debris within a distance of 150m
20
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
6.89
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4
(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
55.08
-
-
... More
Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm
3.06
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade-Area of slab upto 0.50 sqm
11.25
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge. Granite work
50
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting,risers of steps and dados, over 12 mm thick bed ofcement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
232.6
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS:15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
75.54
-
-
... More
Providing and laying pre-polished colored cement tiles of thickness not less than 25mm of any branded make conforming to IS 1237-1980 of approved tiles over a bed of 25 mm thick cement slurry mixed with matching pigment and finishing to required level, curing etc complete all as per manufacturers specifications, design and direction of engineer in charge.
165.24
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of require strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
100
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts,etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
279.6
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
25
-
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
419.63
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
88.4
-
-
... More
Providing and fixing Poly carbonate solid plain transparent sheet of 6 mm thick as approved by the Engineer-in-charge. The sheets shall be fixed using self drilling/self tapping screw of size (5.5x55mm) with EPDM seal complete up to any pitch in horizontal/vertical curved surfaces, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required
39.6
-
-
... More
APPENDIX III :CIVIL AND RELATED WORKS AT TOILET, WASH, PASSAGE,GENERATOR ROOM AND FRONT STEPS -2. INTERNAL PLUMBING AND SANITARY WORKS:
Dismatling existing wash taps, cutting and sealing the existing pipeline. Stacking the reusable material to the yard etc. complete.
39
-
-
... More
Supplying and fixing PVC Floor Trap 100 mmx75 mm size with jali including cutting open, boring through walls, RCC slabs etc. and making good the damages.
15
-
-
... More
Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 8931 15 mm nominal bore
39
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid
4
-
-
... More
Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
4
-
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 litre white P.V.C. automatic flushing cistern
5
-
-
... More
Providing and fixinng stone slab with table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting an chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout pr woth cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth. Granite Stone of approved shade.
3.6
-
-
... More
Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm
4
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP -1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall
20
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall
25
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2
30
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 Kgf/cm2
30
-
-
... More
Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2
12
-
-
... More
Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110 mm dia 4 Kg/cm2
25
-
-
... More
Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includesjointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
12
-
-
... More
APPENDIX III :CIVIL AND RELATED WORKS AT TOILET, WASH, PASSAGE,GENERATOR ROOM AND FRONT STEPS- 3.GENERATOR ROOM:
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
9.72
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
4.62
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with : Cement mortar 1 :6 (1 cement : 6 coarse sand)
11.75
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. In layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 mand lift up to 1.5 m
9
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
3
-
-
... More
Cement plaster 1:3 (1 cement :3 coarse sand ) finished wotj a floating coat of neat cement 20 mm cement plaster
25.4
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
750
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .
30
-
-
... More
Providing corrugated G.I. Trafford sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, excluding the cost of purlins, rafters and including cutting to size and shape wherever required.Details of cost for 10 sqm
30
-
-
... More
APPENDIX IV: ELECTRICAL WORKS RELATED TO RENOVATION OF SUMANGALI -1. WIRING AND RETATED WORK:
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.m.m FRLSPVC insulated copper conductor single core cable etc as required. Group B
30
-
-
... More
Wiring for light point/fan point/exhaust fan point/call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.m.m FRLSPVC insulated copper conductor single core cable etc as required. Group C
190
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc. as required
3
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
700
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
700
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
200
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.5 x 4 sq. mm
50
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 5 x 6 sq. mm
50
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess
including cutting the wall and making good the same incase of recessed conduit as required.20 mm
100
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess
including cutting the wall and making good the same in case of recessed conduit as required.25 mm
50
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recessincluding cutting the wall and making good the same in case of recessed conduit as required.32 mm
25
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including
connections but excluding modular plate etc. as required.5/6 amps switch
30
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
18
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3pin 5/6 amp socket outlet
45
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
18
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push
8
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.as required.
65
-
-
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
25
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 module (75mm X 75mm)
16
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm)
5
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm)
25
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 8 Module (125mmX125mm)
3
-
-
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
150
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
8
-
-
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
45
-
-
... More
Supplying and fixing extra down rod of 10 cm length G.I. pipe, 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
100
-
-
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C
100
-
-
... More
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
15
-
-
... More
Supplying and fixing the modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant)25A SP switch with indicator
8
-
-
... More
Supplying and fixing the modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant)25A 3 pin Shuttered socket
8
-
-
... More
APPENDIX IV: ELECTRICAL WORKS RELATED TO RENOVATION OF SUMANGALI - 2 DB AND ACCESSORIES
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door
2
-
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door
3
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door
1
-
-
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.8 way (4 + 24), Double door
1
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
60
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole
10
-
-
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole
5
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
20
-
-
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
15
-
-
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps
2
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
5
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps
2
-
-
... More
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.
10
-
-
... More
Supply and fixing of 40 A to 63 A TP MCB (C curve), 10KA breaking capacity in the existing MCB DB complete with connections, testing and commissioning etc. as required
8
-
-
... More
APPENDIX IV: ELECTRICAL WORKS RELATED TO RENOVATION OF SUMANGALI - 3 CABLE AND END TERMINATION
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages, colour washing etc. as required.4core 16 sq mm with factory made clamp.
200
-
-
... More
Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages, colour washing etc. as required.4core 35 sq mm with factory made clamp.
150
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
15
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 35 sq. mm (32mm)
4
-
-
... More
APPENDIX IV: ELECTRICAL WORKS RELATED TO RENOVATION OF SUMANGALI- 4 CABLE TRAY: Supply, Fabrication and fixing cable trays, supports etc using angle iron and flats including painting using 2 coats of synthetic enamel paint over zinc chromate metal primer
500
-
-
... More
APPENDIX IV: ELECTRICAL WORKS RELATED TO RENOVATION OF SUMANGALI-5 EARTHING AND RELATED WORKS: Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
... More
Supply and drawing bare earthing conductors of the following sizes along with wiring/cables and giving connection as required 4.00 mm copper conductor ( 8 SWG)
200
-
-
... More
Supply and drawing bare earthing conductors of the following sizes along with wiring/cables and giving connection as required 3.15 mm copper conductor ( 8 SWG)
50
-
-
... More
Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
20
-
-
... More
Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)
8
-
-
... More
APPENDIX IV: ELECTRICAL WORKS RELATED TO RENOVATION OF SUMANGALI -6 ELECTRICAL FITTINGS: Supply, conveyance, istallation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweeep -5 star rated celling fan complete with 300 mm down rod canopies, shackles and blades working on 230V/240V single phase A/C
20
-
-
... More
Supply and installation of 18 W Round/Square LED Surface mount celling light 6500 K working on 240 V AC supply including giving connection etc complete (Make Havells Trim clipon or Equivalent)
20
-
-
... More
Supply and installation of 24 W LED Strip Light warm 3000 K 1700 Im for cove lighting working on 240 V AC suppy including giving connection etc complete (Make Havells flexion or Equivalent
150
-
-
... More
Supply and installation of 12 W LED driver for Strip Light working on 240 V AC supply including giving connection etc complete (Make Havells or Equivalent)
8
-
-
... More
Supply and laying of LED Profile channel 2 M for providing LED strip light including giving connection etc complete.
150
-
-
... More
Supply, Installation, Testing and commisioning of 400 mm sweep Light Duty Wall mounting fanworking on 230 V single phase A/C
2
-
-
... More
supply, conveyance, installation, testing & commissioning of 12 W LED recessed ceiling light fittings including suitable driver unit for use on 230V Ac supply including all accessories required for fixing etc.
55
-
-
... More
Supply & Providing 9W LED Bulb with B22 base, working on 230 V AC supply (Make Wipro GARNET LED 9W BC22 LAMP or equivalent)
10
-
-
... More
Supply and installation of 20 W LED Batten 6500K working on 240 V AC supplyincluding giving connection etc complete
30
-
-
... More
Supply and installation, Testing and commissining of 225 mm sweep light Duty Exhaust fan in metal frame working on 230 V A/C
13
-
-
... More
Supply and installation of Decorative Hanging Light working on 240 V AC supply including giving connection etc complete.
26
-
-
... More
Supply conveyance, installation, testing and commissioning of 450 mm sweep Heavy duty wall mounting fan/Air circulator for 230V/240V single phase AC supply etc. complete as required
12
-
-
... More
Supply conveyance, installation, testing and commissioning of Recess mount 2x2 36W LED Ceiling light 6500K with inbuilt driver working on 230V AC supply including giving connection etc complete (Make Philips full glow or equivalent)
60
-
-
... More
Supply conveyance, installation, testing and commissioning of 100W LED Flood light ouput greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV, and Aluminium pressure die-cast powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS complaint, duly wired up for use on 230 V AC supply. Driver compartment should be separately accessible for maintenance (L M 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
20
-
-
... More
APPENDIX IV: ELECTRICAL WORKS RELATED TO RENOVATION OF SUMANGALI -7 DISMANTLING WORKS Dismantling of existing faulty ceiling fans and storing it in suitable place asdirected by the Engineer/Client at site
20
-
-
... More
Dismantling of existing faulty exhaust fans and storing it in suitable place as directed by the Engineer/Client at site as required
10
-
-
... More
Dismantling of existing faulty light fixtures and storing it in suitable place as directed by the Engineer/Client at site as required
110
-
-
... More
Dismantling of existing distribution board and storing it in suitable place as directed by the Engineer/Client at site as required
2
-
-
... More
Dismantling of existing MCB/RCCB/Isolator /RCBO/blanking plates etc in the existing distribution board and refixing the same in new position including providing necessary connections and making good the damages as required
20
-
-
... More
Dismantling of existing light fixtures cleaning the surface of the same including checking the interconnections and refixing, testing and commissioning including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc as required.
25
-
-
... More
Dismantling of existing independent plugs/power plugs and storing it in suitable place as directoed by the Engineer/Client at site or as required
20
-
-
... More
Dismantling of existing faulty lighting switchboards and storing it in suitable place as directed by the Engineer/Client at site or as required
20
-
-
... More
Dismantling of damaged conduits and wires and storing it in suitable place as directed by the Engineer/Client at site.
500
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%