The Pharmaceutical Corporation IM Kerala Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Summary
Construction And Commissioning For The Modification Of Etp
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_PCIMK_528368_1Bid Award Id
ViewTender No
OUSHADHI/KITCO/CL/08/2022Tender Authority
The Pharmaceutical Corporation IM Kerala Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
766.2
-
-
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
353.27
-
-
2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
478
-
-
2.33.1 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth
3
-
-
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
3.12
-
-
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
42.27
-
-
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
133.02
-
-
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
804.42
-
-
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
69.59
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
147.77
-
-
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
175.4
-
-
5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
45.55
-
-
5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
14.65
-
-
5.11.1 : Extra additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured).Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
5.31
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
15895.94
-
-
5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
14145.23
-
-
5.30 : Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.
34.5
-
-
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
15.59
-
-
10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1867.44
-
-
10.6.1 : Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
12.92
-
-
10.7 : Providing and fixing ball bearing for rolling shutters.
4
-
-
10.9 : Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer -in-Charges, (area of grill to be measured).
2.88
-
-
10.16.3 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes
1519.6
-
-
10.19 : Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
17.7
-
-
10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
375.02
-
-
11.6.1 : Cement plaster askirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement .18 mm thick
3.95
-
-
12.7.1 : Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m2
22
-
-
13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
379.17
-
-
13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
352.88
-
-
13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)
640.61
-
-
13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
63.78
-
-
13.33.1 : Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing
4.23
-
-
13.42 : Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
190.17
-
-
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
849.35
-
-
13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
666.39
-
-
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
139.72
-
-
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
42
-
-
15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
2
-
-
15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges: In cement mortar
2
-
-
15.60 : Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved
172.76
-
-
16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
2.52
-
-
16.78.2 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBRValue-25
37.8
-
-
16.79 : Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge.
28.35
-
-
16.83 : Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
56
-
-
16.84 : Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost.)
56
-
-
16.91.2 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and
proper embedding/laying of inter locking paver blocks into the sand bedding layer
through vibratory compaction by using plate vibrator, filling the joints with sand and
cutting of paver blocks as per required size and pattern, finishing and sweeping
extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
133
-
-
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
54.68
-
-
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
54.68
-
-
21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
12.15
-
-
21.15.2 : Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium
27
-
-
22.4.1 : Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
319.22
-
-
22.22A : Providing and applying fibre reinforced elastomeric liquid water proofing membranewith resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top ofconcrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming ofelastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and twocoats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried outafter scrapping and properly cleaning the surface to remove loose particles withwire brushes, complete in all respect as per the direction of Engineer-in-Charge.
4.73
-
-
22.23A : Providing & Applying polymer modified, flexible cementatious negative sidewaterproofing coating with elastic waterproofing polymers on interior wall plastersurface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatiouswaterproofing polymer(dilution with water in the ratio of 1:1) and two coats ofcementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) afterscrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.
536.7
-
-
50.6.1.1 : Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
0.48
-
-
50.6.1.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.
23.19
-
-
50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
4.54
-
-
50.6.1.7 : Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
0.48
-
-
50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
1.44
-
-
50.12.2.2 : Providing & fixing Poly carbonate multi wall plain sheet 4 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes wherever required.
156.2
-
-
60.7.2 : DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.
15.06
-
-
od131715/2022_2023 : Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. (Note: - Minimum Cement content considered in this item is @ 340 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account).
All work upto plinth level
135.17
-
-
od131716/2022_2023 : Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. (Note: - Minimum Cement content considered in this item is @ 340 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account).
All work above plinth level upto floor V level
95.36
-
-
od138891/2022_2023 : Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. (Note :- Minimum Cement content considered in this item is @ 330 kg/cum. Additional cement requirement as per mix design shall be considered by the bidder while quoting, nothing extra shall be paid on this account) All work upto plinth level
2.71
-
-
od141038/2022_2023 : Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth,for all leads and lifts within the site as per site requirement and direction of engineer in charge, disposed earth to be levelled and neatly dressed. All kinds of soil
180
-
-
od145338/2022_2023 : Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mm x25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemica resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing as per drawing and design etc complete as per instruction of the Engineer in charge
37
-
-
od145366/2022_2023 : Providing and fixing ridge/ valley capping/flashing in required width (minimum 500 mm) with plain galvalume colour coated sheet made out of 0.5mm TCT, minimum 550 MPa cold rolled steel with hot dip metallic coating of Aluminium Zinc alloy (Galvalume) 150 gms/sqm,total of both sides, AZ 150 as per ASTM A 792 or AS1397, with polyester colour coating including cost and conveyance of all materials, scaffolding, lead,lift, labour charges, etc. complete at all levels as directed by Engineer-in-Charge
11
-
-
od145406/2022_2023 : Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mm x25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing as per drawing and design etc complete as per instruction of the Engineer in charge
49
-
-
LT PANEL BOARDS AND ACCESSORIES
-
-
-
od133592/2022_2023 : MCC Panel Supply Installation Testing & Commissioning of LT Switch Board cubicle type, made out of 2mm thick CRCA sheet, totally enclosed, form 4 type construction IP 42 free standing ,floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase, 415 V, 50Hz AC system with busbars, including internal wiring with suitable size HFFR wires/cable interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. Incomer 160 A FP 36kA Thermal magnetic based Moulded Case Circuit Breaker - 1 no Busbar 160A TPN AL Busbar Meters 4A, C curve SP MCB, Ammeters, Voltmeters, Selector Switches,Multifunction Meters Indication Lamps as per SLD Outgoings 32A FP 100KA MPCB – 4Nos 13A FP 100KA MPCB-2Nos 1.6A FP 100KA MPCB-5Nos 2.5A FP 100KA MPCB-2Nos 4A FP 100KA MPCB-2Nos 6.3A FP 100KA MPCB-4Nos 25A SP MCB -1No 40A TP MCB -1No 3 phase DOL starter with thermal overload relay, single phasing preventer and auxillary & power contactors, 1KVAR capacitor for motors upto 3HP -13Nos. 3 phase DOL starter with thermal overload relay, single phasing preventer and auxillary & power contactors, 2kVAR capacitor for motors - 7.5HP -2 Nos. 3 phase Star delta starter with thermal overload relay, single phasing preventer and auxillary & power contactors, 5kVAR capacitor for motors - 20HP -2 Nos. On/Off/Trip indication lamp, LED type - 17 set. Space provision for fixing 3 phase DOL /star-delta starter with thermal overload relay, single phasing preventer and auxillary & power contactors & ON/OFF indication lamps,capacitors in spare outlets - 3Nos
1
-
-
od135404/2022_2023 : Supply, Installation, Testing & Commissioning of 3Nos of 160A HRC Fuse Base with HRC Fuse link and Neutral link on existing panel including all the mounting accessories, internal wiring etc as required complete.
1
-
-
CABLES AND CABLING
-
-
-
od133829/2022_2023 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.4C 16sqmm Al
10
-
-
od133830/2022_2023 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date. 3C 16 sqmm Al
30
-
-
od133833/2022_2023 : Supply of 4C 1.5 sqmm Cu 1.1 KV grade XLPE insulated, PVC sheathed armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
630
-
-
od133876/2022_2023 : Supply of 3C 4sqmm Cu 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
500
-
-
od133877/2022_2023 : Supply of following 2C 4 Sq.mm size 1.1 KV grade XLPE insulated, PVC sheathed, armoured copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
150
-
-
od134069/2022_2023 : Supplying and making end termination with brass compression gland and copper lugs for 4C 1.5 sqmm Cu of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.
34
-
-
od134074/2022_2023 : Supplying and making end termination with brass double compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required. 3C 4cu
52
-
-
od134076/2022_2023 : Supplying and making end termination with brass double compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 KV grade as required.2C 4cu
6
-
-
7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 sq. mm
905
-
-
7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm
205
-
-
7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
205
-
-
7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
105
-
-
14.13.1 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required50 mm dia
25
-
-
od134122/2022_2023 : Providing, laying and fixing 40mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required
25
-
-
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
2
-
-
9.1.8 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 16 sq. mm (25mm)
8
-
-
7.2.3 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc asrequired. Above 95 sq. mm and upto 185 sq. mm
10
-
-
7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 95 sq. mm and upto 185 sq. mm
70
-
-
7.5.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 95 sq. mm and upto 185 sq. mm
40
-
-
od135293/2022_2023 : Supply of 3.5C 185Sq.mm size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Al conductor cable conforming to IS 7098 (Part 1) amended upto date
120
-
-
9.1.7 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)
8
-
-
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
2
-
-
od135406/2022_2023 : Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor cable conforming to IS 7098 (Part 1) amended upto date.3C 10 sqmm Al
100
-
-
od137864/2022_2023 : Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M8 threaded rod and all necessary accessories as required 300 MM WIDTH X 50 MM DEPTH X 2 MM THICK
20
-
-
od137867/2022_2023 : Fabrication, supply and installation of following size of Ladder Type GI cable tray including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M8 threaded rod and all necessery accessories as required 150 MM WIDTH X 50 MM DEPTH X 2 MM THICK
25
-
-
4.6.4 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.300 mm width X 50 mm depth X 1.6 mm thickness
20
-
-
4.6.2 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness
20
-
-
od137870/2022_2023 : Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of primer and two coats of synthetic enamel paint as required
50
-
-
WIRING AND ACCESSORIES
-
-
-
1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B
6
-
-
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
50
-
-
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
50
-
-
1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire
50
-
-
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
20
-
-
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
20
-
-
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
10
-
-
od134123/2022_2023 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 and15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
2
-
-
1.55.2 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B
9
-
-
1.26 : Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
2
-
-
MCBs AND MCB DISTRIBUTION BOARDS
-
-
-
90.11.1.15 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
1
-
-
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
2
-
-
od134170/2022_2023 : Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required 4 pole 40 amps. (415 Volts),30mA sensitivity.
1
-
-
od134171/2022_2023 : Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required 2 pole 25 amps. (240 Volts), 30mA sensitivity-
2
-
-
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
10
-
-
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
23
-
-
2.25 : Supplying and fixing Cable End Box (Loose Wire Box) (IP 43) suitable for tripple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
1
-
-
od134174/2022_2023 : Cable end box for 12 way double door horizontal type SPN DB
2
-
-
od134182/2022_2023 : Supplying and fixing following polycarbonate cable junction boxes made of having IP66 protection with suitable numbers of entry/exit outlets for cable to terminate through glands/membrane and make necessary connections and accessories as required complete.(HENSEL - KF 0404 G)
5
-
-
od134228/2022_2023 : Supplying and fixing Weatherproof enclosure on surface/ recess along with suitable for 25/32amps FP MCB isolator complete with connections, testing and commissioning etc. as required.(Enclosure -HENSEL : KV 6104)
17
-
-
od134233/2022_2023 : Supply and fixing outdoor type START/STOP (2way) thermoplastic push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.(Cat No Hensel-PBS 0201 or equivalent approved make)
17
-
-
LIGHT FIXTURES AND FANS
-
-
-
od134238/2022_2023 : Supply of indoor decorative surface mounted LED Batten with Polycarbonate diffuser, along with driver, system wattage of 20+/-2 Watts,lumen output ofluminaire greater than 2000, power factor >0.9,rated life of L70 @ 35,000 hours,system efficacy greater than 100lumen/watt and including all the necessary accessories as required complete
5
-
-
od134239/2022_2023 : Supply of 10w LED Bulkhead fitting with die cast aluminium housing, PC diffuser and IP65 Protection suitable for operation on 230V 50Hz AC on wall / ceiling including giving connections (Make: Crompton: LBHE-10-CDL or equivalent approved make)
10
-
-
1.41 : Installation, testing and commissioning of pre - wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
15
-
-
1.49 : Numbering of ceiling fan / exhaust fan/ fluorescent fittings as required.
15
-
-
90.15.3.1 : Supply installation testing commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x12mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junctions box etc.complete 5 Meters
5
-
-
90.15.4.2 : Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
5
-
-
EARTHING AND SAFETY EQUIPMENTS
-
-
-
5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing
masonry enclosure with cover plate having locking arrangement and watering pipe etc. with
charcoal/ coke and salt as required
3
-
-
od134262/2022_2023 : Supplying and laying 3.15mm Cu (10 SWG) Copper wire at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of nut bolt & spring washer spaced at 50mm)
225
-
-
od134263/2022_2023 : Providing and fixing 3.15mm Cu (10 SWG) Cu wire on surface or in recess for connections etc. as required.
655
-
-
5.15 : Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
90
-
-
5.9 : Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth
electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
200
-
-
2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2
mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
-
-
od134477/2022_2023 : Supply and providing 2mx1mx2.5mm thick ISI marked electrical 11kV grade anti-skid rubber mat as perIS:15652.for the following sizes
2
-
-
od135291/2022_2023 : Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 4.00 mm GI conductor (8 SWG)
30
-
-
od135423/2022_2023 : Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required. 4.00 mm GI conductor (8 SWG)
20
-
-
Mechanical
-
-
-
od118602/2022_2023 : Bar screen Supplying and fixing of screen of SS 304 construction using SS sheet of 2 mm thick with 10 mm opening size suitable for placing inside a bar screen chamber of 3m x 1.0m x1.0m
1
-
-
od118603/2022_2023 : Bar Screen Supplying and fixing of screen of SS 304 construction using SS sheet of 2 mm thick with 5mm opening size suitable for placing inside a bar screen chamber of size 3.0m x 1.0 m x 1.0m
1
-
-
od118607/2022_2023 : Stirrer unit Flash Mixer Supply and fixing of Paddle type stirrer unit for flash mixer suitable for tank size 1.7m x 1.7m x 2.0 m RCC construction , Impellor and shaft in SS- 304 with 1HP motor of 1440 rpm , with gear box assembly, stirrer unit operating platform including all accessories complete
2
-
-
od118608/2022_2023 : Stirrer unit for Flocculator Supply and fixing of paddle typer sitrrer unit for flocculator suitable for tank size 1.7m x 1.7m x 2.0m RCC construction, Impellor & shaft in SS -304, 1 HP motor of 1440 rpm,with gear box assembly, agitator operating platform including all accessories.The work has to be executed as per detailed specifications, and or as approved by Engineer -in- Charge
1
-
-
od118609/2022_2023 : Chemical Feed Tank with stirrer units Supplying & placing in position of chemical feed tank of size 60cm x 60cm x 80 cm SS - 304 construction with thickness 3mm and individual paddle type stirrer unit with gear box, motor of suitable for placing inside the tank
4
-
-
od118610/2022_2023 : Chemical Dosing System Supplying and fixing of electronic dosing pump with all wetted parts in PP construction suitable for pumping Chemical solution including cost of valve, suction and delivery lines using heavy duty PVC tubes, HDPE tank of 100 litres capacity, FRP motor cover etc. and complete with all accessories.
1
-
-
od126061/2022_2023 : BIo mass media Supplying and placing of non- clogging freely moving biomass media of HDPE construction , UV stabilized , for MBBR reator with surface are of 500 m2 / m3 , virigin white diameter 25mm dia and 12 mm height
80
-
-
od126065/2022_2023 : Tube settler packing media Supplying and fixing of media for tube settlers of UV stabilised rigid PVC material, angle of inclination 60 deg, Plan settling area 11 m2/m3, 1 mm thick, vertical height 750 mm,complete with all accessories and supporting structure as per technical specification
10
-
-
od125368/2022_2023 : Pressure sand filter Media replacement Supplying and laying good quality filter media (coarse aggregates of varying sizes from 53mm to 90 micron) for filter having size 1.2 m dia x 2m height brought from outside including cost of all materials, labour charges, transportation, loading, unloading ,taxes etc complete as directed by the Engineer- in -charge. The work has to be executed as per detailed specifications, and or as approved by Engineer - in - Charge.
1
-
-
od118612/2022_2023 : Activated carbon filter media replacement Supplying and laying of good quality filter media ( including 650 kg granular ( 4 x 8 mesh ) Activated carbon 1050 iv ) for filter having size 1.2m dia x 2m height brought from outside including cost of all materials, labour charges, transportation, loading, unloading, taxes etc complete as directed in Engineer-in-charge. The work has to be executed as per detailed specifications, and or as approved Engineer- in- charge
1
-
-
od126464/2022_2023 : Air distribution system Supply and fixing of of SS 304 air grid using SS pipes, fittings, necessary supports for Air distribution system in MBBR tank 1 & 2 each having area of 6mx 4.5 m to supply
1
-
-
od118613/2022_2023 : Air Blower Supplying, fixing and commissioning of Twin lobe air blower for indoor application complete with a air filter, motor of 1500 rpm ,pressure gauges, pressure relief valve, acoustic hood, suction silencer with suitable flanges, common motor and compressor base frame with motor including all accessories complete as per technical specification including piping and connected works (2 nos) Capacity 900 m3/hr , Pressure : 0.4 kg/cm2
2
-
-
od118614/2022_2023 : Effluent Transfer Pump Supplying and fixing of self priming, non clog centrifugal pump for rated continuous duty and efficiency, CIconstruction, bronze impeller,complete with 3 phase motor, SS shaft, complete with all accessories as per technical specification. Capacity: 5 m3/hr. Head: 12m
2
-
-
od118622/2022_2023 : Coarse bubble diffusers Supply and fixing of EPDM disc type, non clog coarse bubble diffuser with diffuser plate of high strength plastic polymer with a rated flow of min 4m3/ hr with end connections along with design of grid layout for air flow to Equalisation tank of 6m x 3 m
18
-
-
od118623/2022_2023 : Agitator Supplying and fixing of agitator unit with SS- 304 stirrer and shaft for placing inside a sludge tank of size 2 m x 2 m x 2.5(including FB), 1.5 HP motor of 1440 rpm, 2 nos gear boxes, ladder, central bridge, etc. and all accessories.
1
-
-
od118624/2022_2023 : Electro magnetic flow meter Supplying, fixing and commissioning of electromagnetic flow meter, remote sensing type for measuring water in pumping line with stainless steel construction and IP 67 protection, SS 306 junction box, complete with flow transmitter, converter, integrator, totalizer, display unit, measuring unit inside pump house, suitable for outdoor application, cables from meter to measuring units, power cables from pump house to meter including all accessories.
2
-
-
od118670/2022_2023 : Filter Press Supply, fixing and commissioning of filter press polypropylene construction, recessed type complete with 45chambers, 100 cmx100cm plate size,6.0 cm thick complete with motorized tightening arrangement of 7.5HP motor with suitable filter cloth(2 sets) filtrate collection arrangement filtered soli cake collection tray a ll accessories including the cost of 2 numbers of screw pump of minimum 6-8m3/hr capacity ,7 bar pressure,7.5 HP motor, cost of hydraulic oil, required piping cabling and all accessories
1
-
-
od126542/2022_2023 : Supplying and fixing of SS sheet of 2mm thickness Bucket screen with handle suitable for providing inside drains having 300 mm width and 400 mm depth
4
-
-
od139111/2022_2023 : Recommissioning of existing aeration tank having size 20 m x 10m x 4.7m size using sufficient quantity of and innoculam including material, labour, transportation etc
1
-
-
PIPING
-
-
-
od134728/2022_2023 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts,rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2: 32mm OD
36.5
-
-
od136138/2022_2023 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2 40mm
34
-
-
od134548/2022_2023 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling,etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts,rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2 63mm
44
-
-
od134551/2022_2023 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling,etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts,rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2: 50mm OD
56.5
-
-
od134695/2022_2023 : Supplying, laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps, saddles, plugs, coupling, etc. as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers, ferule, etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to withstand the internal design pressure of 10 kg/cm2-110mm
133
-
-
od134791/2022_2023 : Supplying laying, jointing and hydrostatically testing ISI marked PVC pipes as per IS 4985 and specials such as tees, elbows, bends, flanges, reducers, end caps etc as per IS 7834 or IS 10124 as the case may be including cost of all jointing materials like solvent cement, bolts, nuts, rubber washers etc. hire of tools and plant, cost and conveyance of water for testing etc. complete so as to with stand the internal design pressure of 10 kg/ cm2 , size OD : 160 mm
4
-
-
od134870/2022_2023 : Proviidng and fixing of C.I butterfly valve, appropriate with PVC lines including supplying and fixing necessary tail pieces, flanges with bolts, nuts, etc. complete -100mm
1
-
-
od134984/2022_2023 : Providng and fixing of poly propelene ball valve, screwed type appropriate with PVC lines including supplying and fixing necessary tail pieces, flanges with bolts, nuts, etc. complete 40 mm
4
-
-
od137677/2022_2023 : Providng and fixing of poly propelene ball valve, screwed type appropriate with PVC lines including supplying and fixing necessary tail pieces, flanges with bolts, nuts, etc. complete 50 mm
4
-
-
od138626/2022_2023 : Providng and fixing of poly propelene ball valve, screwed type appropriate with PVC lines including supplying and fixing necessary tail pieces, flanges with bolts, nuts, etc. complete 100 mm
2
-
-
od136364/2022_2023 : Proviidng and fixing of poly polypropylene ball valve, appropriate with PVC lines including supplying and fixing with necessary tail pieces, flanges with bolts, nuts, etc. complete - 25 mm
4
-
-
od137687/2022_2023 : Providing and fixing G.I. pipes of 'c' class complete with G.I. fittings External work 100mm dia nominal bore
16
-
-
od136369/2022_2023 : Providing and fixing G.I pipe complete with GI fittings 80mm dia nominal size
10
-
-
18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
5
-
-
18.17.6 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore
1
-
-
18.19.4.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreHorizontal
1
-
-
18.19.6.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):80 mm nominal boreHorizontal
1
-
-
od136417/2022_2023 : Providing and fixing G.I pipes complete with G.I fittings 40mm nominal bore
25
-
-
18.31.1.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):100 mm diameterClass II
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements