The Kerala Ceramics Limited Tender

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level .Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc. complete.

Concrete Solid block masonry using precast solid blocks (Factorymade) of size 30x20x15 cm or nearest available size confirming to IS 2185 part-I of 1979 for superstructure upto floor two level with thickness 20cm in CM1:5 (1cement:5 coarse sand) etc complete.Including the cost of construction materials,labour,consumables,equipments,tools and tackles etc. complete.

Providing and laying in position cement concrete of specified grade 1:2:4 for plinth beam including the cost of centering and shuttering - All work up to plinth level Including all material cost excluding cost of reinforcement. Including labour charges, hire for tools, plants etc., all consumables, all safety precautions etc.complete.

Reinforced cement concrete work for footing, short column,column beams, slab tie beams (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, pillars, piers, abutments, posts and struts etc with the ratio : 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). Including the cost of centering and shuttering, strutting, propping,curing etc. and removal of form. Including all material cost excluding cost of reinforcement, labour charges, hire for tools, plants etc., all consumables, all safety precautions etc.complete.

Steel reinforcement work for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto all level Mild steel and Medium Tensile steel bars Including labour charges, hire for tools, plants etc., all consumables, all safety precautions etc., complete. (Required TMT bar issued free of cost by TKCL)

Steel work in GI built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer & paint including welding and bolted with special shaped washers etc. complete. Including the cost of construction materials, labour charges, consumables, equipments,tools and tackles etc. complete.

Plastering of new surfaces by providing and laying 12 mm thick plaster with (1:4) cement sand mortar at and at all heights and depth above and below plinth level to beams, wall, Floor etc. including chipping of concrete surfaces, cleaning etc. upto 6m lvl.Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc. complete.

Plastering of new surfaces terus by providing and laying 12 mm thick plaster with (1:3) cement sand mortar at and at all heights and depth etc. including chipping of concrete surfaces, cleaning etc. upto 6m lvl.Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc. complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Providing and laying vitrified floor tiles in of sizes 60x60cm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement/joint filler and matching pigments Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Providing and applying two coats of damp proofing paint on cleaned terrace and sunshade surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface damp proof .apply the first waterproofing coat without any dilution and allow 4-6 hours then apply the second waterproofing coat without any dilution in a perpendicular direction to first. application can be done using a brush or a roller Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Supplying and fixing PVC door (syntex) for toilet with necessry required locks, hinges,screws, Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Providing 40x5 m flat hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts, and wooden plugs and embedding in cementconcrete block 30x10x15cm 1:3:6 mix Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Providing and fixing bright finished brass tower bolts of size 150x10mm (barrel type) with necessary screws etc. complete

Providing and fixing bright finished brass tower bolts of size 100x10mm (barrel type) with necessary screws etc. complete

Providing and fixing bright finished 125 mm aluminium handles with Isi marked, anodised transperent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges,zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Including the cost of materials, labour, consumables,equipments,tools and tackles etc

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Including the cost of materials, labour, consumables, equipments,tools and tackles etc

Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms Including the cost of materials, labour, consumables, equipments,tools and tackles etc

Providing and fixing 15mm CP shower with shower rod with 15mm concealed stop cock Including the cost of materials, labour, consumables, equipments,tools and tackles etc

Providing and fixing C.P. long body tap of approved quality conforming to IS standards and weighing not less than 690 gms. Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Including the cost of materials, labour, consumables, equipments,tools and tackles etc

supplying and fixing wall mount stainless steel 304 lever type health faucet for toilet commode Including the cost of materials, labour, consumables, equipments,tools and tackles etc

supplying and fixing PVC floor trap SS lid of required specification as per site condition including charges for chipping floor and making good thefloor after fixing the tile Including the cost of construction materials, labour, consumables, equipments,tools and tackles etc

Providing and fixing CP angle stop cock of approved quality Including the cost of materials, labour, consumables, equipments,tools and tackles etc

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge

Providing and fixing PVC pipes, fitting including fixing the pipe with clampat 1.00 M spacing. This includes joining of pipes & fittings with one step PVC solvent cement and testing of joints complete asper the direction of engineer in charge 25mm dia 6 kg/cm2- external work exposed on wall Including cost of materials, labour charges, hire for tools, plants etc., all consumables, all safety precautions etc

Providing and fixing PVC pipes, fitting including fixing the pipe with clampat 1.00 M spacing. This includes joining of pipes & fittings with one step PVC solvent cement and testing of joints complete asper the direction of engineer in charge 32mm dia 6 kg/cm2- external work exposed on wall Including cost of materials, labour charges, hire for tools, plants etc., all consumables, all safety precautions etc

Providing and fixing PVC pipes, fitting including fixing the pipe with clampat 1.00 M spacing. This includes joining of pipes & fittings with one step PVC solvent cement and testing of joints complete asper the direction of engineer in charge 50mm dia 4 kg/cm2- external work exposed on wall Including cost of materials, labour charges, hire for tools, plants etc., all consumables, all safety precautions etc

Providing and fixing PVC pipes, fitting including fixing the pipe with clampat 1.00 M spacing. This includes joining of pipes & fittings with one step PVC solvent cement and testing of joints complete asper the direction of engineer in charge 110 mm dia 4 kg/cm2- external work exposed on wall Including cost of materials, labour charges, hire for tools, plants etc., all consumables, all safety precautions etc

Providing and placing on terrace (at all floor levels) syntex make polyethylene water storage tank, IS : 12701 marked of 500 litre capacity with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes and with necessary valves, fittings and the base support for tank.

Providing watercutting to the construction joints by 25mm wide and 15mm thick cement mortar 1:3 Including cost of materials, labour charges, hire for tools, plants etc., all consumables, all safety precautions etc

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge Including cost of materials, labour charges, hire for tools, plants etc., all consumables, all safety precautions etc