The Fertilisers And Chemicals Travancore Limited Tender

Replacing/ repairing of LED /CFL / incandescent light fitting.Repair scope includes dismantling the old fitting, fixing new components, reconnecting and servicing all lamps in the fitting.

Replacing of faulty ceiling / exhaust fan with spare unit and servicing.

Site repair / replacing defective condenser of ceiling / exhaust fan etc. and servicing.

Repair/ replacing of high bay fixtures (above 5 M) of light fittings(/LED/Tube/ MV/SV) / ceiling fans / exhaust fans at ceilings of MKK Nair Hall or similar locations.

Repair / replacing defective 5A / 15 A single pole, one / two way switch, 5/ 15A plug socket with / without switch, resistance type or electronic type regulator for ceiling fans, bell push switch or buzzer and servicing the unit and normalising.

Fixing / Replacing ICDP,ICTP isolator switch / MCB up to 63Amps - 4 pole rating. Work includes fixing the item on switch board /wall /structure, disconnection /connection of cables/wires etc. and servicing.

Replacing of of MCB DB-Three phase 4 way with a spare. Work includes removing old, fixing new DB and connecting back all cables/ wires and servicing.

Replacing switchboards of size upto 8x6 inches. Work shall include dismantling existing switchboard, fixing the new switchboard, fixing switches / plug sockets/ regulators etc., giving connections as required and servicing.

Replacing switchboards of size above 8x6 inches. Work shall include dismantling existing switchboard, fixing the new switchboard properly, fixing switches / plug sockets /regulators etc., giving connections as required and servicing.

Providing temporary / additional light fittings such as flood light / SV / MV / Fl. tube / halogen lamp fittings/ Junction box for public functions or similar purpose in township area, disconnecting and returning the same after such requirement.

Servicing of 415V Feeder pillars by cleaning the cubicle thoroughly, replacing damaged components if any, re-terminating /re-crimping cables, replacing connection bolts /nuts /washers /screws if required, correcting the tightness of all power, control and earth connections, Replacing /servicing /lubricating door hinges, patch painting etc. The scope of work also includes clearing bush growth to a radius of two meters around the feeder pillar. All materials required for the work will be supplied by FACT as free issue.

Re-clamping of hanging cables/ repair of damaged wirings etc.

Attending no-supply / partial supply calls in quarters / offices in township area in day shifts on working days and normalizing supply. Contractor / Contractor's electrician shall be available over mobile phone to attend such no supply call during day time. Vehicle for to and fro travel of the crew shall be in contractor's scope. The rate quoted shall be for attending the call promptly, reporting at site within time frame and completethe work satisfactorily as directed by FACT electrical shift-in-charge / engineer.The rate offered is based on number of no supply complaints attended. The rate is applicable for minor jobs and not covered in any of the items of this schedule.

Excavation of existing / new cable trenches in ordinary soil for laying new /repaired cable, refilling the trench and consolidating. All the materials such as sand, brick etc. as required will be issued by FACT free of cost.

Replacing storage type/online water heaters by disconnecting and removing the existing defective unit, installing new unit on existing/new fixtures, connecting and servicing. All materials required for the work will be supplied by the company as free issue.

Laying earth cables to switch boards / main switches / DBs in quarters / offices by tying to the existing wirings on walls.

Open pipe Point wiring with individual control For light /Fan/Bell/Stair case lights /6 A modular plug sockets separately mounted for TV points/Modular switches, using Flexible copper cables 1.5 sqmm for control and neutral connection, Through pvc conduits of size not less than 20 mm using metal saddles with spacing not exceed 50 cm as per relevant drawings or instructions from FACT Engineer in Charge . The work shall include wiring along roof /beam/column/ceiling using clamps and drawing wires as required , preparation and fixing of modular switch boards, switches, cover plates, dummy plates,Etc fixing of ceiling roses on suitable junction boxes , modular step type regulators for fan, drawing of 1.5 sq mm earth wires of flexible copper wire of green color for body earthing of metal clad items ,connecting, testing and commissioning . for wire length greater than 10 m shall be considered as one and half point . All the materials for this Work shall be in the Scope of the contractor( Selection of the switch boards in rooms shall be in the form of requirements to particular room for fans/lights/sockets etc). APPROVED MAKE : WIRE : POLYCAB/ RR KABEL/ KEI/FINOLEX OF FR/FR-LSHS TYPE SWITCH, SOCKETS,REGULATORS ETC : LEGRAND- MYRIUS /HONEYWELL-HORIZON/SCHNEIDER-UNICA PURE/L&T-ENTICE PIPE SHALL BE OF MEDIUM ISI MARKED

Open Conduit Point wiring with individual control For 16 A power sockets switches, using Flexible copper cables 2.5 sqmm for control and neutral connection Through pvc conduits not less than 20 mm using metal saddles with spacing not exceed 50 cm as per relevant drawings or instructions from FACT Engineer in Charge . The work shall include wiring along roof /beam/column/ceiling using clamps and drawing wires as required , preparation and fixing of modular switch boards,switches,cover plates,dummy plates,Etc drawing of 1.5 sq mm earth wires of flexible copper wire of green color for body earthing of metal clad items ,connecting,testing and commissioning . for wire length greater than 10 m shall be considered as one and half point . All the materials for this Work shall be in the Scope of the contractor.If additional power sockets are required in same Switch Boards that shall be considered as half point. APPROVED MAKE : WIRE : POLYCAB/ RR KABEL/ KEI/ FINOLEX OF FR TYPE SWITCH, SOCKETS, ETC : LEGRAND- MYRIUS //HONEYWELL-HORIZON/SCHNEIDER-UNICA PURE/L&T-ENTICE PIPE SHALL BE OF MEDIUM ISI MARKED

Locating circuit faults at normal elevations / below ceiling level and rectifying the fault by repairing / replacing cables/ replacing junction boxes etc.

Clearing of bush growth around substation buildings in township area and cleaning the inside and terrace of substation building. The work scope is clearing bushes inside entire fenced compound or upto to a distance of 3 meters from the wall around the building on all sides in the case of unfenced stations. Removed bushed shall be disposed off as instructed by FACT supervisor. The rate quoted shall be for each cleaning activity per substation basis.

Servicing of earth pits by clearing all vegetation / debris around pits, lifting cover slab / plate, replacing all defective pit internals, cleaning and correcting the connections, checking continuity, repairing the pit side wall to original shape / finish Repairing the water line to the Pit, replacing water funne] etc. And placing back the cover slab /plates

Commissioning of single phase Energy meter at consumer end. Scope include fixing of energy meter box / board at suitable Iocation near main power isolator as per site conditions as directed by FACT Engineer, mounting and wiring of meter / fuse carrier / neutral Link etc . and servicing.

Repalr/ replacement of damaged fuse Units up to 63 Amps in circuits/ DB/ piller boxes

Straight joining 3.3 KV, 3Cx400 sq.mm armoured cables. The scope of work includes carrying out straight joining of 3.3 KV, 3x400 sq.mm armoured cables using compound/heat shrinkable type straight through joint kits as per instruction of Engineer in Charge. Straight Joint Kit and all necessary tools and items required for the work shall be arranged by the contractor. Acceptable Makes for straight through jointing kit:Raychem/ 3M/ Denson.

Providing skilled assistance for special works Iike HT breakerservicing/ Cable joining/ Preventive maintenance of HT notors/ Transformers etc. in various plants working on 8hrs Basis

Providing unskilled assistance for special works like HT breaker servicing/ Cable joining/ Preventive maintenance of HT Motors/ Transformers/ cleaning etc in various plants working on 8 hrs Basis