The Fertilisers And Chemicals Travancore Limited Tender

Magnetic Flowmeter Transmitter Type: Smart Microprocessor based Remote Field Mounted Excitation type : Pulsed DC Display : Required, LCD backlit, alphanumeric Range : User Configurable, 0 – 35.0 m3/hr Accuracy : +/- 0.3% Repeatability : 0.1% of MV Output 1) Analog Output, 4-20 mA DC, HART compatible Output 2) Pulse Output Maximum Load Impedance: ()500mohms Power Supply : 110VAC, 50 Hz Display Language : English Display shall include: a) Actual flow rate; forward and reverse b) Flow units: m3/hr, configurable through front panel keypad c) Totalizer (non-volatile) with Reset facility d) Totalizer units: m3; liters e) Status / error messages f) Empty Pipe Detection Calibration facility : Required through front panel ) keypad and HART communicator Auto zero Correction : Required Configuration : Required through front panel keypad and HART communicator Protection with ) Required for calibration/ access code ) configuration/setup data Memory : Nonvolatile EEPROM Self-Diagnostics : Required Cable entry : 1/2 NPTF Junction box/ terminal) Die Cast Aluminium / SS box material ) Enclosure : Weather proof to IP 65 Mounting : On 2” Pipe Mounting Accessories : Brackets, Fasteners, Washers and U clamps to be supplied M.O.C. for Mounting Accessories : SS304 SENSOR: Fluid / State : Water, Ammonium Sulphate / Liquid Pressure (Nor / Max) ) 3 / 7 in kg/cm2g ) Working Temp.(Nor/Max)) 35 / 50 in deg.C ) Flange to flange ) 200mm distance ) End connection : Flanged, RF Size/Pressure Rating : DN50, PN40 Body (&) Body-Flange Material : SS304 Electrode Material : HastelloyC Liner Material : PTFE (2-3 mm thick) or better suited for the process fluid Grounding/Earthing rings: Required, SS316 Junction box/ terminal) Die Cast Aluminium / SS box material ) Hydrostatic test pressure: 1.5 times Maximum Working Pressure Painting : As per manufacturer’s standard. Maximum Distance between) 20 m flowtube and transmitter: Armoured Interconnection cables : Required, 20 meters to be supplied. (Coil supply and Signal) Interchangeability of ) flow tube (&) transmitter) Required Instrument details ) To be punched on SS plate mounted ) on flowtube and transmitter.

Magnetic Flowmeter Transmitter Type : Smart Microprocessor based Remote Field Mounted Excitation type : Pulsed DC Display : Required, LCD backlit, alphanumeric Range : User Configurable, 0 – 8.0 m3/hr Accuracy : +/- 0.3% Repeatability : 0.1% of MV Output 1) Analog Output, 4-20 mA DC, HART compatible Output 2) Pulse Output Maximum Load Impedance : 500mohms Power Supply : 110VAC, 50 Hz Display Language : English Display shall include: a) Actual flow rate; forward and reverse b) Flow units: m3/hr, configurable through front panel keypad c) Totalizer (non-volatile) with Reset facility d) Totalizer units: m3; liters e) Status / error messages f) Empty Pipe Detection Calibration facility ) Required through front panel ) keypad and HART communicator Auto zero Correction : Required Configuration : Required through front panel keypad and HART communicator Protection with ) Required for Calibration/ access code ) Configuration/Setup data Memory : Nonvolatile EEPROM Self-Diagnostics : Required Cable entry : 1/2 NPTF Junction box/ terminal) Die Cast Aluminium / SS box material ) Enclosure : Weather proof to IP 65 Mounting : On 2” Pipe Mounting Accessories : Brackets, Fasteners, Washers and U clamps to be supplied M.O.C. for Mounting Accessories : SS304 SENSOR: Fluid / State : Water / Liquid Pressure (Nor / Max) ) 3 / 7 in kg/cm2g ) Working Temp.(Nor/Max)) 35 / 50 in deg.C ) Flange to flange ) 200mm distance ) End connection : Flanged, RF Size/Pressure Rating : DN25, PN40 Body & Body-Flange Material : SS304 Electrode Material : HastelloyC Liner Material : PTFE (2-3 mm thick) or better suited for the process fluid Grounding/Earthing rings: Required, SS316 Junction box/ terminal) Die Cast Aluminium / SS box material ) Hydrostatic test pressure: 1.5 times Maximum Working Pressure Painting : As per manufacturer’s standard. Maximum Distance between) 20 m flowtube and transmitter: Armoured Interconnection cables : Required, 20 meters to be supplied. (Coil supply and Signal) Interchangeability of ) Required flow tube & transmitter) Instrument details ) To be punched on SS plate mounted ) on flowtube and transmitter.

Magnetic Flowmeter Transmitter Type: Smart Microprocessor based Remote Field Mounted Excitation type : Pulsed DC Display : Required, LCD backlit, alphanumeric Range : User Configurable, 0 – 90.0 m3/hr Accuracy : +/- 0.3% Repeatability : 0.1% of MV Output 1) Analog Output, 4-20 mA DC, HART compatible Output 2) Pulse Output Maximum Load Impedance: 500mohms Power Supply : 110VAC, 50 Hz Display Language : English Display shall include: a) Actual flow rate; forward and reverse b) Flow units: m3/hr, configurable through front panel keypad c) Totalizer (non-volatile) with Reset facility d) Totalizer units: m3; liters e) Status / error messages f) Empty Pipe Detection Calibration facility : Required through front panel ) keypad and HART communicator Auto zero Correction : Required Configuration : Required through front panel keypad and HART communicator Protection with ) Required for calibration/ access code ) configuration/setup data Memory : Nonvolatile EEPROM Self-Diagnostics : Required Cable entry : 1/2 NPTF Junction box/ terminal) Die Cast Aluminium / SS box material ) Enclosure : Weather proof to IP 65 Mounting : On 2” Pipe Mounting Accessories : Brackets, Fasteners, Washers and U clamps to be supplied M.O.C. for Mounting Accessories : SS304 SENSOR: Fluid / State : Slurry, Sulphuric Acid, Phosphoric Acid / Slurry/Liquid Pressure (Nor / Max) ) 3 /7 in kg/cm2g ) Working Temp.(Nor/Max)) 35 / 50 in deg.C ) Flange to flange ) 200mm distance ) End connection : Flanged, RF Size/Pressure Rating : DN80, PN40 Body & Body-Flange Material : SS304 Electrode Material : HastelloyC Liner Material : PTFE (2-3 mm thick) or better suited for the process fluid Grounding/Earthing rings: Required, SS316 Junction box/ terminal) Die Cast Aluminium / SS box material ) Hydrostatic test pressure: 1.5 times Maximum Working Pressure Painting : As per manufacturer’s standard. Maximum Distance between) 20 m flowtube and transmitter: Armoured Interconnection cables : Required, 20 meters to be supplied. (Coil supply and Signal) Interchangeability of ) flow tube & transmitter) Required Instrument details ) To be punched on SS plate mounted ) on flowtube and transmitter.